openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

ASoC: Use explicit sequence for WM8903 bias off 

This makes no real difference compared to the write sequencer sequence
that was previously used but can run without a clock being provided.
Also remove the write sequencer support code as this was the last use
of it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
This commit is contained in:
Mark Brown 2011-02-10 14:20:49 +00:00
parent 22f226dd14
commit b4d06f456d
1 changed files with 21 additions and 45 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

66
sound/soc/codecs/wm8903.c
View File

@ -229,8 +229,6 @@ struct wm8903_priv {
/* Reference count */
int class_w_users;
struct completion wseq;
struct snd_soc_jack *mic_jack;
int mic_det;
int mic_short;
@ -262,41 +260,6 @@ static int wm8903_volatile_register(struct snd_soc_codec *codec, unsigned int re
}
}
static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
{
u16 reg[5];
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
BUG_ON(start > 48);
/* Enable the sequencer if it's not already on */
reg[0] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_0);
snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0,
reg[0] | WM8903_WSEQ_ENA);
dev_dbg(codec->dev, "Starting sequence at %d\n", start);
snd_soc_write(codec, WM8903_WRITE_SEQUENCER_3,
start | WM8903_WSEQ_START);
/* Wait for it to complete. If we have the interrupt wired up then
* that will break us out of the poll early.
*/
do {
wait_for_completion_timeout(&wm8903->wseq,
msecs_to_jiffies(10));
reg[4] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_4);
} while (reg[4] & WM8903_WSEQ_BUSY);
dev_dbg(codec->dev, "Sequence complete\n");
/* Disable the sequencer again if we enabled it */
snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]);
return 0;
}
static void wm8903_reset(struct snd_soc_codec *codec)
{
snd_soc_write(codec, WM8903_SW_RESET_AND_ID, 0);
@ -1213,11 +1176,26 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
break;
case SND_SOC_BIAS_OFF:
snd_soc_update_bits(codec, WM8903_CLOCK_RATES_2,
WM8903_CLK_SYS_ENA, WM8903_CLK_SYS_ENA);
wm8903_run_sequence(codec, 32);
snd_soc_update_bits(codec, WM8903_CLOCK_RATES_2,
WM8903_CLK_SYS_ENA, 0);
snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0,
WM8903_BIAS_ENA, 0);
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
WM8903_VMID_SOFT_MASK,
2 << WM8903_VMID_SOFT_SHIFT);
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
WM8903_VMID_BUF_ENA, 0);
msleep(290);
snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0,
WM8903_VMID_TIE_ENA | WM8903_BUFIO_ENA |
WM8903_VMID_IO_ENA | WM8903_VMID_RES_MASK |
WM8903_VMID_SOFT_MASK |
WM8903_VMID_BUF_ENA, 0);
snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0,
WM8903_STARTUP_BIAS_ENA, 0);
break;
}
@ -1670,8 +1648,7 @@ static irqreturn_t wm8903_irq(int irq, void *data)
int_val = snd_soc_read(codec, WM8903_INTERRUPT_STATUS_1) & mask;
if (int_val & WM8903_WSEQ_BUSY_EINT) {
dev_dbg(codec->dev, "Write sequencer done\n");
complete(&wm8903->wseq);
dev_warn(codec->dev, "Write sequencer done\n");
}
/*
@ -1918,7 +1895,6 @@ static int wm8903_probe(struct snd_soc_codec *codec)
u16 val;
wm8903->codec = codec;
init_completion(&wm8903->wseq);
ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
if (ret != 0) {