diff --git a/arch/arm/configs/ep80219_defconfig b/arch/arm/configs/ep80219_defconfig index fbe312e757cb..3c73b707c2f3 100644 --- a/arch/arm/configs/ep80219_defconfig +++ b/arch/arm/configs/ep80219_defconfig @@ -522,6 +522,7 @@ CONFIG_E100=y # CONFIG_DL2K is not set CONFIG_E1000=y CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/arm/configs/iq31244_defconfig b/arch/arm/configs/iq31244_defconfig index c07628ceaf0c..32467160a6df 100644 --- a/arch/arm/configs/iq31244_defconfig +++ b/arch/arm/configs/iq31244_defconfig @@ -493,6 +493,7 @@ CONFIG_NETDEVICES=y # CONFIG_DL2K is not set CONFIG_E1000=y CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/arm/configs/iq80321_defconfig b/arch/arm/configs/iq80321_defconfig index 18fa1615fdfd..b000da753c41 100644 --- a/arch/arm/configs/iq80321_defconfig +++ b/arch/arm/configs/iq80321_defconfig @@ -415,6 +415,7 @@ CONFIG_NETDEVICES=y # CONFIG_DL2K is not set CONFIG_E1000=y CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/arm/configs/iq80331_defconfig b/arch/arm/configs/iq80331_defconfig index f50035de1fff..46c79e1efe07 100644 --- a/arch/arm/configs/iq80331_defconfig +++ b/arch/arm/configs/iq80331_defconfig @@ -496,6 +496,7 @@ CONFIG_NETDEVICES=y # CONFIG_DL2K is not set CONFIG_E1000=y CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/arm/configs/iq80332_defconfig b/arch/arm/configs/iq80332_defconfig index 18b3f372ed68..11959b705d82 100644 --- a/arch/arm/configs/iq80332_defconfig +++ b/arch/arm/configs/iq80332_defconfig @@ -496,6 +496,7 @@ CONFIG_NETDEVICES=y # CONFIG_DL2K is not set CONFIG_E1000=y CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/i386/defconfig b/arch/i386/defconfig index 6a431b926019..3cbe6e9cb9fc 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -644,6 +644,8 @@ CONFIG_8139TOO_PIO=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 1d07d8072ec2..991c07b57c24 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -557,6 +557,7 @@ CONFIG_E100=m # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index b1e8f09e9fd5..6859119bc9dd 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -565,6 +565,7 @@ CONFIG_E100=m # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 0856ca67dd50..53899dc8eb53 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -548,6 +548,7 @@ CONFIG_E100=y # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 275a26c6e5aa..dcbc78a4cfa4 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -565,6 +565,7 @@ CONFIG_E100=m # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig index 955ef5084f3e..959ad3c4e372 100644 --- a/arch/parisc/configs/a500_defconfig +++ b/arch/parisc/configs/a500_defconfig @@ -602,6 +602,7 @@ CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=m CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index 9d86b6b1ebd1..0b1c8c1fa8a3 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -626,6 +626,7 @@ CONFIG_ACENIC=m # CONFIG_DL2K is not set CONFIG_E1000=m # CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index b657f7e44762..063b84f2cbea 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -533,6 +533,7 @@ CONFIG_MII=y # CONFIG_DL2K is not set CONFIG_E1000=m # CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 3c22ccb18519..d6fed3f56580 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -675,6 +675,7 @@ CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index 751a622fb7a7..c775027947f9 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -567,6 +567,7 @@ CONFIG_ACENIC=m # CONFIG_DL2K is not set CONFIG_E1000=m # CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 07b6d3d23360..68194c03f6d1 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -454,6 +454,7 @@ CONFIG_AMD8111_ETH=y # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 0b2b55a79c3c..6f6c6bed1aa5 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -724,6 +724,7 @@ CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index a50ce0fa9243..aa9893a1f6e8 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -671,6 +671,7 @@ CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/ppc/configs/bamboo_defconfig b/arch/ppc/configs/bamboo_defconfig index 0ba4e70d50b6..41fd3938fa5c 100644 --- a/arch/ppc/configs/bamboo_defconfig +++ b/arch/ppc/configs/bamboo_defconfig @@ -499,6 +499,7 @@ CONFIG_NATSEMI=y # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/ppc/configs/katana_defconfig b/arch/ppc/configs/katana_defconfig index 0f3bb9af9c22..7311fe6b42de 100644 --- a/arch/ppc/configs/katana_defconfig +++ b/arch/ppc/configs/katana_defconfig @@ -488,6 +488,7 @@ CONFIG_E100=y # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/ppc/configs/mpc834x_sys_defconfig b/arch/ppc/configs/mpc834x_sys_defconfig index 673dc64ebcb1..b96a6d6dad0e 100644 --- a/arch/ppc/configs/mpc834x_sys_defconfig +++ b/arch/ppc/configs/mpc834x_sys_defconfig @@ -402,6 +402,7 @@ CONFIG_E100=y # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/ppc/configs/power3_defconfig b/arch/ppc/configs/power3_defconfig index 93da595a4738..a1ef929bca59 100644 --- a/arch/ppc/configs/power3_defconfig +++ b/arch/ppc/configs/power3_defconfig @@ -442,6 +442,7 @@ CONFIG_E100=y # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/arch/sparc/mm/iommu.c b/arch/sparc/mm/iommu.c index 489bf68d5f05..77840c804786 100644 --- a/arch/sparc/mm/iommu.c +++ b/arch/sparc/mm/iommu.c @@ -295,8 +295,7 @@ static void iommu_release_one(u32 busa, int npages, struct sbus_bus *sbus) int ioptex; int i; - if (busa < iommu->start) - BUG(); + BUG_ON(busa < iommu->start); ioptex = (busa - iommu->start) >> PAGE_SHIFT; for (i = 0; i < npages; i++) { iopte_val(iommu->page_table[ioptex + i]) = 0; @@ -340,9 +339,9 @@ static int iommu_map_dma_area(dma_addr_t *pba, unsigned long va, iopte_t *first; int ioptex; - if ((va & ~PAGE_MASK) != 0) BUG(); - if ((addr & ~PAGE_MASK) != 0) BUG(); - if ((len & ~PAGE_MASK) != 0) BUG(); + BUG_ON((va & ~PAGE_MASK) != 0); + BUG_ON((addr & ~PAGE_MASK) != 0); + BUG_ON((len & ~PAGE_MASK) != 0); /* page color = physical address */ ioptex = bit_map_string_get(&iommu->usemap, len >> PAGE_SHIFT, @@ -405,8 +404,8 @@ static void iommu_unmap_dma_area(unsigned long busa, int len) unsigned long end; int ioptex = (busa - iommu->start) >> PAGE_SHIFT; - if ((busa & ~PAGE_MASK) != 0) BUG(); - if ((len & ~PAGE_MASK) != 0) BUG(); + BUG_ON((busa & ~PAGE_MASK) != 0); + BUG_ON((len & ~PAGE_MASK) != 0); iopte += ioptex; end = busa + len; diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index a3fb3376ffa0..92b2fb6aaa46 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -529,6 +529,7 @@ CONFIG_NET_PCI=y # CONFIG_DL2K is not set CONFIG_E1000=m CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index 459c8fbe02b4..a22930d62adf 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -280,9 +280,9 @@ static struct sparc64_tick_ops stick_operations __read_mostly = { * Since STICK is constantly updating, we have to access it carefully. * * The sequence we use to read is: - * 1) read low - * 2) read high - * 3) read low again, if it rolled over increment high by 1 + * 1) read high + * 2) read low + * 3) read high again, if it rolled re-read both low and high again. * * Writing STICK safely is also tricky: * 1) write low to zero @@ -295,18 +295,18 @@ static struct sparc64_tick_ops stick_operations __read_mostly = { static unsigned long __hbird_read_stick(void) { unsigned long ret, tmp1, tmp2, tmp3; - unsigned long addr = HBIRD_STICK_ADDR; + unsigned long addr = HBIRD_STICK_ADDR+8; - __asm__ __volatile__("ldxa [%1] %5, %2\n\t" - "add %1, 0x8, %1\n\t" - "ldxa [%1] %5, %3\n\t" + __asm__ __volatile__("ldxa [%1] %5, %2\n" + "1:\n\t" "sub %1, 0x8, %1\n\t" + "ldxa [%1] %5, %3\n\t" + "add %1, 0x8, %1\n\t" "ldxa [%1] %5, %4\n\t" "cmp %4, %2\n\t" - "blu,a,pn %%xcc, 1f\n\t" - " add %3, 1, %3\n" - "1:\n\t" - "sllx %3, 32, %3\n\t" + "bne,a,pn %%xcc, 1b\n\t" + " mov %4, %2\n\t" + "sllx %4, 32, %4\n\t" "or %3, %4, %0\n\t" : "=&r" (ret), "=&r" (addr), "=&r" (tmp1), "=&r" (tmp2), "=&r" (tmp3) diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index 5231fe83ea4b..09a3eb743315 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -646,6 +646,7 @@ CONFIG_8139TOO=y # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 1421941487c4..0c69918671ca 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1914,6 +1914,15 @@ config E1000_NAPI If in doubt, say N. +config E1000_DISABLE_PACKET_SPLIT + bool "Disable Packet Split for PCI express adapters" + depends on E1000 + help + Say Y here if you want to use the legacy receive path for PCI express + hadware. + + If in doubt, say N. + source "drivers/net/ixp2000/Kconfig" config MYRI_SBUS diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index 1f7ca453bb4a..dde631f8f685 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -1925,8 +1925,8 @@ static void cas_tx(struct net_device *dev, struct cas *cp, u64 compwb = le64_to_cpu(cp->init_block->tx_compwb); #endif if (netif_msg_intr(cp)) - printk(KERN_DEBUG "%s: tx interrupt, status: 0x%x, %lx\n", - cp->dev->name, status, compwb); + printk(KERN_DEBUG "%s: tx interrupt, status: 0x%x, %llx\n", + cp->dev->name, status, (unsigned long long)compwb); /* process all the rings */ for (ring = 0; ring < N_TX_RINGS; ring++) { #ifdef USE_TX_COMPWB diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index d252297e4db0..5cedc81786e3 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -121,7 +121,7 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - if(hw->media_type == e1000_media_type_copper) { + if (hw->media_type == e1000_media_type_copper) { ecmd->supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | @@ -133,7 +133,7 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ecmd->advertising = ADVERTISED_TP; - if(hw->autoneg == 1) { + if (hw->autoneg == 1) { ecmd->advertising |= ADVERTISED_Autoneg; /* the e1000 autoneg seems to match ethtool nicely */ @@ -144,7 +144,7 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ecmd->port = PORT_TP; ecmd->phy_address = hw->phy_addr; - if(hw->mac_type == e1000_82543) + if (hw->mac_type == e1000_82543) ecmd->transceiver = XCVR_EXTERNAL; else ecmd->transceiver = XCVR_INTERNAL; @@ -160,13 +160,13 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ecmd->port = PORT_FIBRE; - if(hw->mac_type >= e1000_82545) + if (hw->mac_type >= e1000_82545) ecmd->transceiver = XCVR_INTERNAL; else ecmd->transceiver = XCVR_EXTERNAL; } - if(netif_carrier_ok(adapter->netdev)) { + if (netif_carrier_ok(adapter->netdev)) { e1000_get_speed_and_duplex(hw, &adapter->link_speed, &adapter->link_duplex); @@ -175,7 +175,7 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) /* unfortunatly FULL_DUPLEX != DUPLEX_FULL * and HALF_DUPLEX != DUPLEX_HALF */ - if(adapter->link_duplex == FULL_DUPLEX) + if (adapter->link_duplex == FULL_DUPLEX) ecmd->duplex = DUPLEX_FULL; else ecmd->duplex = DUPLEX_HALF; @@ -205,11 +205,11 @@ e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) if (ecmd->autoneg == AUTONEG_ENABLE) { hw->autoneg = 1; - if(hw->media_type == e1000_media_type_fiber) + if (hw->media_type == e1000_media_type_fiber) hw->autoneg_advertised = ADVERTISED_1000baseT_Full | ADVERTISED_FIBRE | ADVERTISED_Autoneg; - else + else hw->autoneg_advertised = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Half | @@ -219,12 +219,12 @@ e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ADVERTISED_TP; ecmd->advertising = hw->autoneg_advertised; } else - if(e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) + if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) return -EINVAL; /* reset the link */ - if(netif_running(adapter->netdev)) { + if (netif_running(adapter->netdev)) { e1000_down(adapter); e1000_reset(adapter); e1000_up(adapter); @@ -241,14 +241,14 @@ e1000_get_pauseparam(struct net_device *netdev, struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - pause->autoneg = + pause->autoneg = (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); - - if(hw->fc == e1000_fc_rx_pause) + + if (hw->fc == e1000_fc_rx_pause) pause->rx_pause = 1; - else if(hw->fc == e1000_fc_tx_pause) + else if (hw->fc == e1000_fc_tx_pause) pause->tx_pause = 1; - else if(hw->fc == e1000_fc_full) { + else if (hw->fc == e1000_fc_full) { pause->rx_pause = 1; pause->tx_pause = 1; } @@ -260,31 +260,30 @@ e1000_set_pauseparam(struct net_device *netdev, { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - + adapter->fc_autoneg = pause->autoneg; - if(pause->rx_pause && pause->tx_pause) + if (pause->rx_pause && pause->tx_pause) hw->fc = e1000_fc_full; - else if(pause->rx_pause && !pause->tx_pause) + else if (pause->rx_pause && !pause->tx_pause) hw->fc = e1000_fc_rx_pause; - else if(!pause->rx_pause && pause->tx_pause) + else if (!pause->rx_pause && pause->tx_pause) hw->fc = e1000_fc_tx_pause; - else if(!pause->rx_pause && !pause->tx_pause) + else if (!pause->rx_pause && !pause->tx_pause) hw->fc = e1000_fc_none; hw->original_fc = hw->fc; - if(adapter->fc_autoneg == AUTONEG_ENABLE) { - if(netif_running(adapter->netdev)) { + if (adapter->fc_autoneg == AUTONEG_ENABLE) { + if (netif_running(adapter->netdev)) { e1000_down(adapter); e1000_up(adapter); } else e1000_reset(adapter); - } - else + } else return ((hw->media_type == e1000_media_type_fiber) ? e1000_setup_link(hw) : e1000_force_mac_fc(hw)); - + return 0; } @@ -301,14 +300,14 @@ e1000_set_rx_csum(struct net_device *netdev, uint32_t data) struct e1000_adapter *adapter = netdev_priv(netdev); adapter->rx_csum = data; - if(netif_running(netdev)) { + if (netif_running(netdev)) { e1000_down(adapter); e1000_up(adapter); } else e1000_reset(adapter); return 0; } - + static uint32_t e1000_get_tx_csum(struct net_device *netdev) { @@ -320,7 +319,7 @@ e1000_set_tx_csum(struct net_device *netdev, uint32_t data) { struct e1000_adapter *adapter = netdev_priv(netdev); - if(adapter->hw.mac_type < e1000_82543) { + if (adapter->hw.mac_type < e1000_82543) { if (!data) return -EINVAL; return 0; @@ -339,8 +338,8 @@ static int e1000_set_tso(struct net_device *netdev, uint32_t data) { struct e1000_adapter *adapter = netdev_priv(netdev); - if((adapter->hw.mac_type < e1000_82544) || - (adapter->hw.mac_type == e1000_82547)) + if ((adapter->hw.mac_type < e1000_82544) || + (adapter->hw.mac_type == e1000_82547)) return data ? -EINVAL : 0; if (data) @@ -348,7 +347,7 @@ e1000_set_tso(struct net_device *netdev, uint32_t data) else netdev->features &= ~NETIF_F_TSO; return 0; -} +} #endif /* NETIF_F_TSO */ static uint32_t @@ -365,7 +364,7 @@ e1000_set_msglevel(struct net_device *netdev, uint32_t data) adapter->msg_enable = data; } -static int +static int e1000_get_regs_len(struct net_device *netdev) { #define E1000_REGS_LEN 32 @@ -401,7 +400,7 @@ e1000_get_regs(struct net_device *netdev, regs_buff[11] = E1000_READ_REG(hw, TIDV); regs_buff[12] = adapter->hw.phy_type; /* PHY type (IGP=1, M88=0) */ - if(hw->phy_type == e1000_phy_igp) { + if (hw->phy_type == e1000_phy_igp) { e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, IGP01E1000_PHY_AGC_A); e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_A & @@ -455,7 +454,7 @@ e1000_get_regs(struct net_device *netdev, e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); regs_buff[24] = (uint32_t)phy_data; /* phy local receiver status */ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ - if(hw->mac_type >= e1000_82540 && + if (hw->mac_type >= e1000_82540 && hw->media_type == e1000_media_type_copper) { regs_buff[26] = E1000_READ_REG(hw, MANC); } @@ -479,7 +478,7 @@ e1000_get_eeprom(struct net_device *netdev, int ret_val = 0; uint16_t i; - if(eeprom->len == 0) + if (eeprom->len == 0) return -EINVAL; eeprom->magic = hw->vendor_id | (hw->device_id << 16); @@ -489,16 +488,16 @@ e1000_get_eeprom(struct net_device *netdev, eeprom_buff = kmalloc(sizeof(uint16_t) * (last_word - first_word + 1), GFP_KERNEL); - if(!eeprom_buff) + if (!eeprom_buff) return -ENOMEM; - if(hw->eeprom.type == e1000_eeprom_spi) + if (hw->eeprom.type == e1000_eeprom_spi) ret_val = e1000_read_eeprom(hw, first_word, last_word - first_word + 1, eeprom_buff); else { for (i = 0; i < last_word - first_word + 1; i++) - if((ret_val = e1000_read_eeprom(hw, first_word + i, 1, + if ((ret_val = e1000_read_eeprom(hw, first_word + i, 1, &eeprom_buff[i]))) break; } @@ -525,10 +524,10 @@ e1000_set_eeprom(struct net_device *netdev, int max_len, first_word, last_word, ret_val = 0; uint16_t i; - if(eeprom->len == 0) + if (eeprom->len == 0) return -EOPNOTSUPP; - if(eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) + if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) return -EFAULT; max_len = hw->eeprom.word_size * 2; @@ -536,19 +535,19 @@ e1000_set_eeprom(struct net_device *netdev, first_word = eeprom->offset >> 1; last_word = (eeprom->offset + eeprom->len - 1) >> 1; eeprom_buff = kmalloc(max_len, GFP_KERNEL); - if(!eeprom_buff) + if (!eeprom_buff) return -ENOMEM; ptr = (void *)eeprom_buff; - if(eeprom->offset & 1) { + if (eeprom->offset & 1) { /* need read/modify/write of first changed EEPROM word */ /* only the second byte of the word is being modified */ ret_val = e1000_read_eeprom(hw, first_word, 1, &eeprom_buff[0]); ptr++; } - if(((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) { + if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) { /* need read/modify/write of last changed EEPROM word */ /* only the first byte of the word is being modified */ ret_val = e1000_read_eeprom(hw, last_word, 1, @@ -567,9 +566,9 @@ e1000_set_eeprom(struct net_device *netdev, ret_val = e1000_write_eeprom(hw, first_word, last_word - first_word + 1, eeprom_buff); - /* Update the checksum over the first part of the EEPROM if needed + /* Update the checksum over the first part of the EEPROM if needed * and flush shadow RAM for 82573 conrollers */ - if((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) || + if ((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) || (hw->mac_type == e1000_82573))) e1000_update_eeprom_checksum(hw); @@ -633,7 +632,7 @@ e1000_get_ringparam(struct net_device *netdev, ring->rx_jumbo_pending = 0; } -static int +static int e1000_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring) { @@ -670,25 +669,25 @@ e1000_set_ringparam(struct net_device *netdev, txdr = adapter->tx_ring; rxdr = adapter->rx_ring; - if((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) + if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) return -EINVAL; rxdr->count = max(ring->rx_pending,(uint32_t)E1000_MIN_RXD); rxdr->count = min(rxdr->count,(uint32_t)(mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD)); - E1000_ROUNDUP(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE); + E1000_ROUNDUP(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE); txdr->count = max(ring->tx_pending,(uint32_t)E1000_MIN_TXD); txdr->count = min(txdr->count,(uint32_t)(mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD)); - E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE); + E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE); for (i = 0; i < adapter->num_tx_queues; i++) txdr[i].count = txdr->count; for (i = 0; i < adapter->num_rx_queues; i++) rxdr[i].count = rxdr->count; - if(netif_running(adapter->netdev)) { + if (netif_running(adapter->netdev)) { /* Try to get new resources before deleting old */ if ((err = e1000_setup_all_rx_resources(adapter))) goto err_setup_rx; @@ -708,7 +707,7 @@ e1000_set_ringparam(struct net_device *netdev, kfree(rx_old); adapter->rx_ring = rx_new; adapter->tx_ring = tx_new; - if((err = e1000_up(adapter))) + if ((err = e1000_up(adapter))) return err; } @@ -727,10 +726,10 @@ e1000_set_ringparam(struct net_device *netdev, uint32_t pat, value; \ uint32_t test[] = \ {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \ - for(pat = 0; pat < sizeof(test)/sizeof(test[0]); pat++) { \ + for (pat = 0; pat < sizeof(test)/sizeof(test[0]); pat++) { \ E1000_WRITE_REG(&adapter->hw, R, (test[pat] & W)); \ value = E1000_READ_REG(&adapter->hw, R); \ - if(value != (test[pat] & W & M)) { \ + if (value != (test[pat] & W & M)) { \ DPRINTK(DRV, ERR, "pattern test reg %04X failed: got " \ "0x%08X expected 0x%08X\n", \ E1000_##R, value, (test[pat] & W & M)); \ @@ -746,7 +745,7 @@ e1000_set_ringparam(struct net_device *netdev, uint32_t value; \ E1000_WRITE_REG(&adapter->hw, R, W & M); \ value = E1000_READ_REG(&adapter->hw, R); \ - if((W & M) != (value & M)) { \ + if ((W & M) != (value & M)) { \ DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\ "expected 0x%08X\n", E1000_##R, (value & M), (W & M)); \ *data = (adapter->hw.mac_type < e1000_82543) ? \ @@ -782,7 +781,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) value = (E1000_READ_REG(&adapter->hw, STATUS) & toggle); E1000_WRITE_REG(&adapter->hw, STATUS, toggle); after = E1000_READ_REG(&adapter->hw, STATUS) & toggle; - if(value != after) { + if (value != after) { DPRINTK(DRV, ERR, "failed STATUS register test got: " "0x%08X expected: 0x%08X\n", after, value); *data = 1; @@ -810,7 +809,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0x003FFFFB); REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000); - if(adapter->hw.mac_type >= e1000_82543) { + if (adapter->hw.mac_type >= e1000_82543) { REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0xFFFFFFFF); REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF); @@ -818,7 +817,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF); REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF); - for(i = 0; i < E1000_RAR_ENTRIES; i++) { + for (i = 0; i < E1000_RAR_ENTRIES; i++) { REG_PATTERN_TEST(RA + ((i << 1) << 2), 0xFFFFFFFF, 0xFFFFFFFF); REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF, @@ -834,7 +833,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) } - for(i = 0; i < E1000_MC_TBL_SIZE; i++) + for (i = 0; i < E1000_MC_TBL_SIZE; i++) REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF); *data = 0; @@ -850,8 +849,8 @@ e1000_eeprom_test(struct e1000_adapter *adapter, uint64_t *data) *data = 0; /* Read and add up the contents of the EEPROM */ - for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { - if((e1000_read_eeprom(&adapter->hw, i, 1, &temp)) < 0) { + for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { + if ((e1000_read_eeprom(&adapter->hw, i, 1, &temp)) < 0) { *data = 1; break; } @@ -859,7 +858,7 @@ e1000_eeprom_test(struct e1000_adapter *adapter, uint64_t *data) } /* If Checksum is not Correct return error else test passed */ - if((checksum != (uint16_t) EEPROM_SUM) && !(*data)) + if ((checksum != (uint16_t) EEPROM_SUM) && !(*data)) *data = 2; return *data; @@ -888,9 +887,9 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) *data = 0; /* Hook up test interrupt handler just for this test */ - if(!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) { + if (!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) { shared_int = FALSE; - } else if(request_irq(irq, &e1000_test_intr, SA_SHIRQ, + } else if (request_irq(irq, &e1000_test_intr, SA_SHIRQ, netdev->name, netdev)){ *data = 1; return -1; @@ -901,12 +900,12 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) msec_delay(10); /* Test each interrupt */ - for(; i < 10; i++) { + for (; i < 10; i++) { /* Interrupt to test */ mask = 1 << i; - if(!shared_int) { + if (!shared_int) { /* Disable the interrupt to be reported in * the cause register and then force the same * interrupt and see if one gets posted. If @@ -917,8 +916,8 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) E1000_WRITE_REG(&adapter->hw, IMC, mask); E1000_WRITE_REG(&adapter->hw, ICS, mask); msec_delay(10); - - if(adapter->test_icr & mask) { + + if (adapter->test_icr & mask) { *data = 3; break; } @@ -935,12 +934,12 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) E1000_WRITE_REG(&adapter->hw, ICS, mask); msec_delay(10); - if(!(adapter->test_icr & mask)) { + if (!(adapter->test_icr & mask)) { *data = 4; break; } - if(!shared_int) { + if (!shared_int) { /* Disable the other interrupts to be reported in * the cause register and then force the other * interrupts and see if any get posted. If @@ -952,7 +951,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) E1000_WRITE_REG(&adapter->hw, ICS, ~mask & 0x00007FFF); msec_delay(10); - if(adapter->test_icr) { + if (adapter->test_icr) { *data = 5; break; } @@ -977,24 +976,24 @@ e1000_free_desc_rings(struct e1000_adapter *adapter) struct pci_dev *pdev = adapter->pdev; int i; - if(txdr->desc && txdr->buffer_info) { - for(i = 0; i < txdr->count; i++) { - if(txdr->buffer_info[i].dma) + if (txdr->desc && txdr->buffer_info) { + for (i = 0; i < txdr->count; i++) { + if (txdr->buffer_info[i].dma) pci_unmap_single(pdev, txdr->buffer_info[i].dma, txdr->buffer_info[i].length, PCI_DMA_TODEVICE); - if(txdr->buffer_info[i].skb) + if (txdr->buffer_info[i].skb) dev_kfree_skb(txdr->buffer_info[i].skb); } } - if(rxdr->desc && rxdr->buffer_info) { - for(i = 0; i < rxdr->count; i++) { - if(rxdr->buffer_info[i].dma) + if (rxdr->desc && rxdr->buffer_info) { + for (i = 0; i < rxdr->count; i++) { + if (rxdr->buffer_info[i].dma) pci_unmap_single(pdev, rxdr->buffer_info[i].dma, rxdr->buffer_info[i].length, PCI_DMA_FROMDEVICE); - if(rxdr->buffer_info[i].skb) + if (rxdr->buffer_info[i].skb) dev_kfree_skb(rxdr->buffer_info[i].skb); } } @@ -1027,11 +1026,11 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) /* Setup Tx descriptor ring and Tx buffers */ - if(!txdr->count) - txdr->count = E1000_DEFAULT_TXD; + if (!txdr->count) + txdr->count = E1000_DEFAULT_TXD; size = txdr->count * sizeof(struct e1000_buffer); - if(!(txdr->buffer_info = kmalloc(size, GFP_KERNEL))) { + if (!(txdr->buffer_info = kmalloc(size, GFP_KERNEL))) { ret_val = 1; goto err_nomem; } @@ -1039,7 +1038,7 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) txdr->size = txdr->count * sizeof(struct e1000_tx_desc); E1000_ROUNDUP(txdr->size, 4096); - if(!(txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma))) { + if (!(txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma))) { ret_val = 2; goto err_nomem; } @@ -1058,12 +1057,12 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT | E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT); - for(i = 0; i < txdr->count; i++) { + for (i = 0; i < txdr->count; i++) { struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*txdr, i); struct sk_buff *skb; unsigned int size = 1024; - if(!(skb = alloc_skb(size, GFP_KERNEL))) { + if (!(skb = alloc_skb(size, GFP_KERNEL))) { ret_val = 3; goto err_nomem; } @@ -1083,18 +1082,18 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) /* Setup Rx descriptor ring and Rx buffers */ - if(!rxdr->count) - rxdr->count = E1000_DEFAULT_RXD; + if (!rxdr->count) + rxdr->count = E1000_DEFAULT_RXD; size = rxdr->count * sizeof(struct e1000_buffer); - if(!(rxdr->buffer_info = kmalloc(size, GFP_KERNEL))) { + if (!(rxdr->buffer_info = kmalloc(size, GFP_KERNEL))) { ret_val = 4; goto err_nomem; } memset(rxdr->buffer_info, 0, size); rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc); - if(!(rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma))) { + if (!(rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma))) { ret_val = 5; goto err_nomem; } @@ -1114,11 +1113,11 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT); E1000_WRITE_REG(&adapter->hw, RCTL, rctl); - for(i = 0; i < rxdr->count; i++) { + for (i = 0; i < rxdr->count; i++) { struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i); struct sk_buff *skb; - if(!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, + if (!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL))) { ret_val = 6; goto err_nomem; @@ -1227,15 +1226,15 @@ e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter) /* Check Phy Configuration */ e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg); - if(phy_reg != 0x4100) + if (phy_reg != 0x4100) return 9; e1000_read_phy_reg(&adapter->hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg); - if(phy_reg != 0x0070) + if (phy_reg != 0x0070) return 10; e1000_read_phy_reg(&adapter->hw, 29, &phy_reg); - if(phy_reg != 0x001A) + if (phy_reg != 0x001A) return 11; return 0; @@ -1249,7 +1248,7 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter) adapter->hw.autoneg = FALSE; - if(adapter->hw.phy_type == e1000_phy_m88) { + if (adapter->hw.phy_type == e1000_phy_m88) { /* Auto-MDI/MDIX Off */ e1000_write_phy_reg(&adapter->hw, M88E1000_PHY_SPEC_CTRL, 0x0808); @@ -1269,14 +1268,14 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter) E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ E1000_CTRL_FD); /* Force Duplex to FULL */ - if(adapter->hw.media_type == e1000_media_type_copper && + if (adapter->hw.media_type == e1000_media_type_copper && adapter->hw.phy_type == e1000_phy_m88) { ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ } else { /* Set the ILOS bit on the fiber Nic is half * duplex link is detected. */ stat_reg = E1000_READ_REG(&adapter->hw, STATUS); - if((stat_reg & E1000_STATUS_FD) == 0) + if ((stat_reg & E1000_STATUS_FD) == 0) ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU); } @@ -1285,7 +1284,7 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter) /* Disable the receiver on the PHY so when a cable is plugged in, the * PHY does not begin to autoneg when a cable is reconnected to the NIC. */ - if(adapter->hw.phy_type == e1000_phy_m88) + if (adapter->hw.phy_type == e1000_phy_m88) e1000_phy_disable_receiver(adapter); udelay(500); @@ -1301,14 +1300,14 @@ e1000_set_phy_loopback(struct e1000_adapter *adapter) switch (adapter->hw.mac_type) { case e1000_82543: - if(adapter->hw.media_type == e1000_media_type_copper) { + if (adapter->hw.media_type == e1000_media_type_copper) { /* Attempt to setup Loopback mode on Non-integrated PHY. * Some PHY registers get corrupted at random, so * attempt this 10 times. */ - while(e1000_nonintegrated_phy_loopback(adapter) && + while (e1000_nonintegrated_phy_loopback(adapter) && count++ < 10); - if(count < 11) + if (count < 11) return 0; } break; @@ -1430,8 +1429,8 @@ static int e1000_check_lbtest_frame(struct sk_buff *skb, unsigned int frame_size) { frame_size &= ~1; - if(*(skb->data + 3) == 0xFF) { - if((*(skb->data + frame_size / 2 + 10) == 0xBE) && + if (*(skb->data + 3) == 0xFF) { + if ((*(skb->data + frame_size / 2 + 10) == 0xBE) && (*(skb->data + frame_size / 2 + 12) == 0xAF)) { return 0; } @@ -1450,53 +1449,53 @@ e1000_run_loopback_test(struct e1000_adapter *adapter) E1000_WRITE_REG(&adapter->hw, RDT, rxdr->count - 1); - /* Calculate the loop count based on the largest descriptor ring + /* Calculate the loop count based on the largest descriptor ring * The idea is to wrap the largest ring a number of times using 64 * send/receive pairs during each loop */ - if(rxdr->count <= txdr->count) + if (rxdr->count <= txdr->count) lc = ((txdr->count / 64) * 2) + 1; else lc = ((rxdr->count / 64) * 2) + 1; k = l = 0; - for(j = 0; j <= lc; j++) { /* loop count loop */ - for(i = 0; i < 64; i++) { /* send the packets */ - e1000_create_lbtest_frame(txdr->buffer_info[i].skb, + for (j = 0; j <= lc; j++) { /* loop count loop */ + for (i = 0; i < 64; i++) { /* send the packets */ + e1000_create_lbtest_frame(txdr->buffer_info[i].skb, 1024); - pci_dma_sync_single_for_device(pdev, + pci_dma_sync_single_for_device(pdev, txdr->buffer_info[k].dma, txdr->buffer_info[k].length, PCI_DMA_TODEVICE); - if(unlikely(++k == txdr->count)) k = 0; + if (unlikely(++k == txdr->count)) k = 0; } E1000_WRITE_REG(&adapter->hw, TDT, k); msec_delay(200); time = jiffies; /* set the start time for the receive */ good_cnt = 0; do { /* receive the sent packets */ - pci_dma_sync_single_for_cpu(pdev, + pci_dma_sync_single_for_cpu(pdev, rxdr->buffer_info[l].dma, rxdr->buffer_info[l].length, PCI_DMA_FROMDEVICE); - + ret_val = e1000_check_lbtest_frame( rxdr->buffer_info[l].skb, 1024); - if(!ret_val) + if (!ret_val) good_cnt++; - if(unlikely(++l == rxdr->count)) l = 0; - /* time + 20 msecs (200 msecs on 2.4) is more than - * enough time to complete the receives, if it's + if (unlikely(++l == rxdr->count)) l = 0; + /* time + 20 msecs (200 msecs on 2.4) is more than + * enough time to complete the receives, if it's * exceeded, break and error off */ } while (good_cnt < 64 && jiffies < (time + 20)); - if(good_cnt != 64) { + if (good_cnt != 64) { ret_val = 13; /* ret_val is the same as mis-compare */ - break; + break; } - if(jiffies >= (time + 2)) { + if (jiffies >= (time + 2)) { ret_val = 14; /* error code for time out error */ break; } @@ -1549,17 +1548,17 @@ e1000_link_test(struct e1000_adapter *adapter, uint64_t *data) *data = 1; } else { e1000_check_for_link(&adapter->hw); - if(adapter->hw.autoneg) /* if auto_neg is set wait for it */ + if (adapter->hw.autoneg) /* if auto_neg is set wait for it */ msec_delay(4000); - if(!(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) { + if (!(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) { *data = 1; } } return *data; } -static int +static int e1000_diag_test_count(struct net_device *netdev) { return E1000_TEST_LEN; @@ -1572,7 +1571,7 @@ e1000_diag_test(struct net_device *netdev, struct e1000_adapter *adapter = netdev_priv(netdev); boolean_t if_running = netif_running(netdev); - if(eth_test->flags == ETH_TEST_FL_OFFLINE) { + if (eth_test->flags == ETH_TEST_FL_OFFLINE) { /* Offline tests */ /* save speed, duplex, autoneg settings */ @@ -1582,27 +1581,27 @@ e1000_diag_test(struct net_device *netdev, /* Link test performed before hardware reset so autoneg doesn't * interfere with test result */ - if(e1000_link_test(adapter, &data[4])) + if (e1000_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; - if(if_running) + if (if_running) e1000_down(adapter); else e1000_reset(adapter); - if(e1000_reg_test(adapter, &data[0])) + if (e1000_reg_test(adapter, &data[0])) eth_test->flags |= ETH_TEST_FL_FAILED; e1000_reset(adapter); - if(e1000_eeprom_test(adapter, &data[1])) + if (e1000_eeprom_test(adapter, &data[1])) eth_test->flags |= ETH_TEST_FL_FAILED; e1000_reset(adapter); - if(e1000_intr_test(adapter, &data[2])) + if (e1000_intr_test(adapter, &data[2])) eth_test->flags |= ETH_TEST_FL_FAILED; e1000_reset(adapter); - if(e1000_loopback_test(adapter, &data[3])) + if (e1000_loopback_test(adapter, &data[3])) eth_test->flags |= ETH_TEST_FL_FAILED; /* restore speed, duplex, autoneg settings */ @@ -1611,11 +1610,11 @@ e1000_diag_test(struct net_device *netdev, adapter->hw.autoneg = autoneg; e1000_reset(adapter); - if(if_running) + if (if_running) e1000_up(adapter); } else { /* Online tests */ - if(e1000_link_test(adapter, &data[4])) + if (e1000_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; /* Offline tests aren't run; pass by default */ @@ -1633,7 +1632,7 @@ e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - switch(adapter->hw.device_id) { + switch (adapter->hw.device_id) { case E1000_DEV_ID_82542: case E1000_DEV_ID_82543GC_FIBER: case E1000_DEV_ID_82543GC_COPPER: @@ -1649,7 +1648,7 @@ e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) case E1000_DEV_ID_82546GB_FIBER: case E1000_DEV_ID_82571EB_FIBER: /* Wake events only supported on port A for dual fiber */ - if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) { + if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) { wol->supported = 0; wol->wolopts = 0; return; @@ -1661,13 +1660,13 @@ e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) WAKE_BCAST | WAKE_MAGIC; wol->wolopts = 0; - if(adapter->wol & E1000_WUFC_EX) + if (adapter->wol & E1000_WUFC_EX) wol->wolopts |= WAKE_UCAST; - if(adapter->wol & E1000_WUFC_MC) + if (adapter->wol & E1000_WUFC_MC) wol->wolopts |= WAKE_MCAST; - if(adapter->wol & E1000_WUFC_BC) + if (adapter->wol & E1000_WUFC_BC) wol->wolopts |= WAKE_BCAST; - if(adapter->wol & E1000_WUFC_MAG) + if (adapter->wol & E1000_WUFC_MAG) wol->wolopts |= WAKE_MAGIC; return; } @@ -1679,7 +1678,7 @@ e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - switch(adapter->hw.device_id) { + switch (adapter->hw.device_id) { case E1000_DEV_ID_82542: case E1000_DEV_ID_82543GC_FIBER: case E1000_DEV_ID_82543GC_COPPER: @@ -1693,23 +1692,23 @@ e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) case E1000_DEV_ID_82546GB_FIBER: case E1000_DEV_ID_82571EB_FIBER: /* Wake events only supported on port A for dual fiber */ - if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) + if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) return wol->wolopts ? -EOPNOTSUPP : 0; /* Fall Through */ default: - if(wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; adapter->wol = 0; - if(wol->wolopts & WAKE_UCAST) + if (wol->wolopts & WAKE_UCAST) adapter->wol |= E1000_WUFC_EX; - if(wol->wolopts & WAKE_MCAST) + if (wol->wolopts & WAKE_MCAST) adapter->wol |= E1000_WUFC_MC; - if(wol->wolopts & WAKE_BCAST) + if (wol->wolopts & WAKE_BCAST) adapter->wol |= E1000_WUFC_BC; - if(wol->wolopts & WAKE_MAGIC) + if (wol->wolopts & WAKE_MAGIC) adapter->wol |= E1000_WUFC_MAG; } @@ -1727,7 +1726,7 @@ e1000_led_blink_callback(unsigned long data) { struct e1000_adapter *adapter = (struct e1000_adapter *) data; - if(test_and_change_bit(E1000_LED_ON, &adapter->led_status)) + if (test_and_change_bit(E1000_LED_ON, &adapter->led_status)) e1000_led_off(&adapter->hw); else e1000_led_on(&adapter->hw); @@ -1740,11 +1739,11 @@ e1000_phys_id(struct net_device *netdev, uint32_t data) { struct e1000_adapter *adapter = netdev_priv(netdev); - if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ)) + if (!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ)) data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ); - if(adapter->hw.mac_type < e1000_82571) { - if(!adapter->blink_timer.function) { + if (adapter->hw.mac_type < e1000_82571) { + if (!adapter->blink_timer.function) { init_timer(&adapter->blink_timer); adapter->blink_timer.function = e1000_led_blink_callback; adapter->blink_timer.data = (unsigned long) adapter; @@ -1782,21 +1781,21 @@ static int e1000_nway_reset(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); - if(netif_running(netdev)) { + if (netif_running(netdev)) { e1000_down(adapter); e1000_up(adapter); } return 0; } -static int +static int e1000_get_stats_count(struct net_device *netdev) { return E1000_STATS_LEN; } -static void -e1000_get_ethtool_stats(struct net_device *netdev, +static void +e1000_get_ethtool_stats(struct net_device *netdev, struct ethtool_stats *stats, uint64_t *data) { struct e1000_adapter *adapter = netdev_priv(netdev); @@ -1830,7 +1829,7 @@ e1000_get_ethtool_stats(struct net_device *netdev, /* BUG_ON(i != E1000_STATS_LEN); */ } -static void +static void e1000_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data) { #ifdef CONFIG_E1000_MQ @@ -1839,9 +1838,9 @@ e1000_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data) uint8_t *p = data; int i; - switch(stringset) { + switch (stringset) { case ETH_SS_TEST: - memcpy(data, *e1000_gstrings_test, + memcpy(data, *e1000_gstrings_test, E1000_TEST_LEN*ETH_GSTRING_LEN); break; case ETH_SS_STATS: diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 2437d362ff63..beeec0fbbeac 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -1600,10 +1600,10 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) if(ret_val) return ret_val; - /* Read the MII 1000Base-T Control Register (Address 9). */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); - if(ret_val) - return ret_val; + /* Read the MII 1000Base-T Control Register (Address 9). */ + ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); + if(ret_val) + return ret_val; /* Need to parse both autoneg_advertised and fc and set up * the appropriate PHY registers. First we will parse for @@ -3916,7 +3916,7 @@ e1000_read_eeprom(struct e1000_hw *hw, } } - if(eeprom->use_eerd == TRUE) { + if (eeprom->use_eerd == TRUE) { ret_val = e1000_read_eeprom_eerd(hw, offset, words, data); if ((e1000_is_onboard_nvm_eeprom(hw) == TRUE) || (hw->mac_type != e1000_82573)) @@ -4423,7 +4423,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) return -E1000_ERR_EEPROM; } - /* If STM opcode located in bits 15:8 of flop, reset firmware */ + /* If STM opcode located in bits 15:8 of flop, reset firmware */ if ((flop & 0xFF00) == E1000_STM_OPCODE) { E1000_WRITE_REG(hw, HICR, E1000_HICR_FW_RESET); } @@ -4431,7 +4431,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) /* Perform the flash update */ E1000_WRITE_REG(hw, EECD, eecd | E1000_EECD_FLUPD); - for (i=0; i < attempts; i++) { + for (i=0; i < attempts; i++) { eecd = E1000_READ_REG(hw, EECD); if ((eecd & E1000_EECD_FLUPD) == 0) { break; @@ -4504,6 +4504,7 @@ e1000_read_mac_addr(struct e1000_hw * hw) hw->perm_mac_addr[i] = (uint8_t) (eeprom_data & 0x00FF); hw->perm_mac_addr[i+1] = (uint8_t) (eeprom_data >> 8); } + switch (hw->mac_type) { default: break; @@ -6840,7 +6841,8 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw) { uint32_t manc = 0; - if(hw->mac_type > e1000_82547_rev_2) + + if (hw->mac_type > e1000_82547_rev_2) manc = E1000_READ_REG(hw, MANC); return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? E1000_BLK_PHY_RESET : E1000_SUCCESS; diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 0b8f6f2b774b..f1219dd9dbac 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -377,6 +377,7 @@ int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask); /* Filters (multicast, vlan, receive) */ +void e1000_mc_addr_list_update(struct e1000_hw *hw, uint8_t * mc_addr_list, uint32_t mc_addr_count, uint32_t pad, uint32_t rar_used_count); uint32_t e1000_hash_mc_addr(struct e1000_hw *hw, uint8_t * mc_addr); void e1000_mta_set(struct e1000_hw *hw, uint32_t hash_value); void e1000_rar_set(struct e1000_hw *hw, uint8_t * mc_addr, uint32_t rar_index); @@ -401,7 +402,9 @@ void e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value); void e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value); /* Port I/O is only supported on 82544 and newer */ uint32_t e1000_io_read(struct e1000_hw *hw, unsigned long port); +uint32_t e1000_read_reg_io(struct e1000_hw *hw, uint32_t offset); void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value); +void e1000_enable_pciex_master(struct e1000_hw *hw); int32_t e1000_disable_pciex_master(struct e1000_hw *hw); int32_t e1000_get_software_semaphore(struct e1000_hw *hw); void e1000_release_software_semaphore(struct e1000_hw *hw); @@ -899,14 +902,14 @@ struct e1000_ffvt_entry { #define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */ #define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */ #define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */ -#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */ -#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */ -#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */ -#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */ -#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */ -#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */ -#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */ -#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */ +#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */ +#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */ +#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */ +#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */ +#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */ +#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */ +#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */ +#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */ #define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ #define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ #define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ @@ -1761,7 +1764,6 @@ struct e1000_hw { #define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ #define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc. still to be processed. */ - /* Transmit Configuration Word */ #define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ #define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index d0a5d1656c5f..31e332935e5a 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -29,11 +29,71 @@ #include "e1000.h" /* Change Log - * 6.0.58 4/20/05 - * o Accepted ethtool cleanup patch from Stephen Hemminger - * 6.0.44+ 2/15/05 - * o applied Anton's patch to resolve tx hang in hardware - * o Applied Andrew Mortons patch - e1000 stops working after resume + * 6.3.9 12/16/2005 + * o incorporate fix for recycled skbs from IBM LTC + * 6.3.7 11/18/2005 + * o Honor eeprom setting for enabling/disabling Wake On Lan + * 6.3.5 11/17/2005 + * o Fix memory leak in rx ring handling for PCI Express adapters + * 6.3.4 11/8/05 + * o Patch from Jesper Juhl to remove redundant NULL checks for kfree + * 6.3.2 9/20/05 + * o Render logic that sets/resets DRV_LOAD as inline functions to + * avoid code replication. If f/w is AMT then set DRV_LOAD only when + * network interface is open. + * o Handle DRV_LOAD set/reset in cases where AMT uses VLANs. + * o Adjust PBA partioning for Jumbo frames using MTU size and not + * rx_buffer_len + * 6.3.1 9/19/05 + * o Use adapter->tx_timeout_factor in Tx Hung Detect logic + (e1000_clean_tx_irq) + * o Support for 8086:10B5 device (Quad Port) + * 6.2.14 9/15/05 + * o In AMT enabled configurations, set/reset DRV_LOAD bit on interface + * open/close + * 6.2.13 9/14/05 + * o Invoke e1000_check_mng_mode only for 8257x controllers since it + * accesses the FWSM that is not supported in other controllers + * 6.2.12 9/9/05 + * o Add support for device id E1000_DEV_ID_82546GB_QUAD_COPPER + * o set RCTL:SECRC only for controllers newer than 82543. + * o When the n/w interface comes down reset DRV_LOAD bit to notify f/w. + * This code was moved from e1000_remove to e1000_close + * 6.2.10 9/6/05 + * o Fix error in updating RDT in el1000_alloc_rx_buffers[_ps] -- one off. + * o Enable fc by default on 82573 controllers (do not read eeprom) + * o Fix rx_errors statistic not to include missed_packet_count + * o Fix rx_dropped statistic not to include missed_packet_count + (Padraig Brady) + * 6.2.9 8/30/05 + * o Remove call to update statistics from the controller ib e1000_get_stats + * 6.2.8 8/30/05 + * o Improved algorithm for rx buffer allocation/rdt update + * o Flow control watermarks relative to rx PBA size + * o Simplified 'Tx Hung' detect logic + * 6.2.7 8/17/05 + * o Report rx buffer allocation failures and tx timeout counts in stats + * 6.2.6 8/16/05 + * o Implement workaround for controller erratum -- linear non-tso packet + * following a TSO gets written back prematurely + * 6.2.5 8/15/05 + * o Set netdev->tx_queue_len based on link speed/duplex settings. + * o Fix net_stats.rx_fifo_errors
+ * o Do not power off PHY if SoL/IDER session is active
+ * 6.2.4 8/10/05
+ * o Fix loopback test setup/cleanup for 82571/3 controllers
+ * o Fix parsing of outgoing packets (e1000_transfer_dhcp_info) to treat
+ * all packets as raw
+ * o Prevent operations that will cause the PHY to be reset if SoL/IDER
+ * sessions are active and log a message
+ * 6.2.2 7/21/05
+ * o used fixed size descriptors for all MTU sizes, reduces memory load
+ * 6.1.2 4/13/05
+ * o Fixed ethtool diagnostics
+ * o Enabled flow control to take default eeprom settings
+ * o Added stats_lock around e1000_read_phy_reg commands to avoid concurrent
+ * calls, one from mii_ioctl and other from within update_stats while
+ * processing MIIREG ioctl.
*/
char e1000_driver_name[] = "e1000";
@@ -295,7 +355,7 @@ e1000_irq_disable(struct e1000_adapter *adapter)
static inline void
e1000_irq_enable(struct e1000_adapter *adapter)
{
- if(likely(atomic_dec_and_test(&adapter->irq_sem))) {
+ if (likely(atomic_dec_and_test(&adapter->irq_sem))) {
E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
E1000_WRITE_FLUSH(&adapter->hw);
}
@@ -307,17 +367,17 @@ e1000_update_mng_vlan(struct e1000_adapter *adapter)
struct net_device *netdev = adapter->netdev;
uint16_t vid = adapter->hw.mng_cookie.vlan_id;
uint16_t old_vid = adapter->mng_vlan_id;
- if(adapter->vlgrp) {
- if(!adapter->vlgrp->vlan_devices[vid]) {
- if(adapter->hw.mng_cookie.status &
+ if (adapter->vlgrp) {
+ if (!adapter->vlgrp->vlan_devices[vid]) {
+ if (adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
e1000_vlan_rx_add_vid(netdev, vid);
adapter->mng_vlan_id = vid;
} else
adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
-
- if((old_vid != (uint16_t)E1000_MNG_VLAN_NONE) &&
- (vid != old_vid) &&
+
+ if ((old_vid != (uint16_t)E1000_MNG_VLAN_NONE) &&
+ (vid != old_vid) &&
!adapter->vlgrp->vlan_devices[old_vid])
e1000_vlan_rx_kill_vid(netdev, old_vid);
}
@@ -401,10 +461,10 @@ e1000_up(struct e1000_adapter *adapter)
/* hardware has been reset, we need to reload some things */
/* Reset the PHY if it was previously powered down */
- if(adapter->hw.media_type == e1000_media_type_copper) {
+ if (adapter->hw.media_type == e1000_media_type_copper) {
uint16_t mii_reg;
e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
- if(mii_reg & MII_CR_POWER_DOWN)
+ if (mii_reg & MII_CR_POWER_DOWN)
e1000_phy_reset(&adapter->hw);
}
@@ -425,16 +485,16 @@ e1000_up(struct e1000_adapter *adapter)
}
#ifdef CONFIG_PCI_MSI
- if(adapter->hw.mac_type > e1000_82547_rev_2) {
+ if (adapter->hw.mac_type > e1000_82547_rev_2) {
adapter->have_msi = TRUE;
- if((err = pci_enable_msi(adapter->pdev))) {
+ if ((err = pci_enable_msi(adapter->pdev))) {
DPRINTK(PROBE, ERR,
"Unable to allocate MSI interrupt Error: %d\n", err);
adapter->have_msi = FALSE;
}
}
#endif
- if((err = request_irq(adapter->pdev->irq, &e1000_intr,
+ if ((err = request_irq(adapter->pdev->irq, &e1000_intr,
SA_SHIRQ | SA_SAMPLE_RANDOM,
netdev->name, netdev))) {
DPRINTK(PROBE, ERR,
@@ -471,7 +531,7 @@ e1000_down(struct e1000_adapter *adapter)
#endif
free_irq(adapter->pdev->irq, netdev);
#ifdef CONFIG_PCI_MSI
- if(adapter->hw.mac_type > e1000_82547_rev_2 &&
+ if (adapter->hw.mac_type > e1000_82547_rev_2 &&
adapter->have_msi == TRUE)
pci_disable_msi(adapter->pdev);
#endif
@@ -537,12 +597,12 @@ e1000_reset(struct e1000_adapter *adapter)
break;
}
- if((adapter->hw.mac_type != e1000_82573) &&
+ if ((adapter->hw.mac_type != e1000_82573) &&
(adapter->netdev->mtu > E1000_RXBUFFER_8192))
pba -= 8; /* allocate more FIFO for Tx */
- if(adapter->hw.mac_type == e1000_82547) {
+ if (adapter->hw.mac_type == e1000_82547) {
adapter->tx_fifo_head = 0;
adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
adapter->tx_fifo_size =
@@ -565,9 +625,9 @@ e1000_reset(struct e1000_adapter *adapter)
/* Allow time for pending master requests to run */
e1000_reset_hw(&adapter->hw);
- if(adapter->hw.mac_type >= e1000_82544)
+ if (adapter->hw.mac_type >= e1000_82544)
E1000_WRITE_REG(&adapter->hw, WUC, 0);
- if(e1000_init_hw(&adapter->hw))
+ if (e1000_init_hw(&adapter->hw))
DPRINTK(PROBE, ERR, "Hardware Error\n");
e1000_update_mng_vlan(adapter);
/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
@@ -606,26 +666,26 @@ e1000_probe(struct pci_dev *pdev,
int i, err, pci_using_dac;
uint16_t eeprom_data;
uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
- if((err = pci_enable_device(pdev)))
+ if ((err = pci_enable_device(pdev)))
return err;
- if(!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
+ if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
pci_using_dac = 1;
} else {
- if((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
+ if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
E1000_ERR("No usable DMA configuration, aborting\n");
return err;
}
pci_using_dac = 0;
}
- if((err = pci_request_regions(pdev, e1000_driver_name)))
+ if ((err = pci_request_regions(pdev, e1000_driver_name)))
return err;
pci_set_master(pdev);
netdev = alloc_etherdev(sizeof(struct e1000_adapter));
- if(!netdev) {
+ if (!netdev) {
err = -ENOMEM;
goto err_alloc_etherdev;
}
@@ -644,15 +704,15 @@ e1000_probe(struct pci_dev *pdev,
mmio_len = pci_resource_len(pdev, BAR_0);
adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
- if(!adapter->hw.hw_addr) {
+ if (!adapter->hw.hw_addr) {
err = -EIO;
goto err_ioremap;
}
- for(i = BAR_1; i <= BAR_5; i++) {
- if(pci_resource_len(pdev, i) == 0)
+ for (i = BAR_1; i <= BAR_5; i++) {
+ if (pci_resource_len(pdev, i) == 0)
continue;
- if(pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+ if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
adapter->hw.io_base = pci_resource_start(pdev, i);
break;
}
@@ -689,13 +749,13 @@ e1000_probe(struct pci_dev *pdev,
/* setup the private structure */
- if((err = e1000_sw_init(adapter)))
+ if ((err = e1000_sw_init(adapter)))
goto err_sw_init;
- if((err = e1000_check_phy_reset_block(&adapter->hw)))
+ if ((err = e1000_check_phy_reset_block(&adapter->hw)))
DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
- if(adapter->hw.mac_type >= e1000_82543) {
+ if (adapter->hw.mac_type >= e1000_82543) {
netdev->features = NETIF_F_SG |
NETIF_F_HW_CSUM |
NETIF_F_HW_VLAN_TX |
@@ -704,16 +764,16 @@ e1000_probe(struct pci_dev *pdev,
}
#ifdef NETIF_F_TSO
- if((adapter->hw.mac_type >= e1000_82544) &&
+ if ((adapter->hw.mac_type >= e1000_82544) &&
(adapter->hw.mac_type != e1000_82547))
netdev->features |= NETIF_F_TSO;
#ifdef NETIF_F_TSO_IPV6
- if(adapter->hw.mac_type > e1000_82547_rev_2)
+ if (adapter->hw.mac_type > e1000_82547_rev_2)
netdev->features |= NETIF_F_TSO_IPV6;
#endif
#endif
- if(pci_using_dac)
+ if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
/* hard_start_xmit is safe against parallel locking */
@@ -721,14 +781,14 @@ e1000_probe(struct pci_dev *pdev,
adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
- /* before reading the EEPROM, reset the controller to
+ /* before reading the EEPROM, reset the controller to
* put the device in a known good starting state */
-
+
e1000_reset_hw(&adapter->hw);
/* make sure the EEPROM is good */
- if(e1000_validate_eeprom_checksum(&adapter->hw) < 0) {
+ if (e1000_validate_eeprom_checksum(&adapter->hw) < 0) {
DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
err = -EIO;
goto err_eeprom;
@@ -736,12 +796,12 @@ e1000_probe(struct pci_dev *pdev,
/* copy the MAC address out of the EEPROM */
- if(e1000_read_mac_addr(&adapter->hw))
+ if (e1000_read_mac_addr(&adapter->hw))
DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
- if(!is_valid_ether_addr(netdev->perm_addr)) {
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
err = -EIO;
goto err_eeprom;
@@ -781,7 +841,7 @@ e1000_probe(struct pci_dev *pdev,
* enable the ACPI Magic Packet filter
*/
- switch(adapter->hw.mac_type) {
+ switch (adapter->hw.mac_type) {
case e1000_82542_rev2_0:
case e1000_82542_rev2_1:
case e1000_82543:
@@ -794,7 +854,7 @@ e1000_probe(struct pci_dev *pdev,
case e1000_82546:
case e1000_82546_rev_3:
case e1000_82571:
- if(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1){
+ if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1){
e1000_read_eeprom(&adapter->hw,
EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
break;
@@ -805,7 +865,7 @@ e1000_probe(struct pci_dev *pdev,
EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
break;
}
- if(eeprom_data & eeprom_apme_mask)
+ if (eeprom_data & eeprom_apme_mask)
adapter->wol |= E1000_WUFC_MAG;
/* print bus type/speed/width info */
@@ -840,7 +900,7 @@ e1000_probe(struct pci_dev *pdev,
e1000_get_hw_control(adapter);
strcpy(netdev->name, "eth%d");
- if((err = register_netdev(netdev)))
+ if ((err = register_netdev(netdev)))
goto err_register;
DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
@@ -881,10 +941,10 @@ e1000_remove(struct pci_dev *pdev)
flush_scheduled_work();
- if(adapter->hw.mac_type >= e1000_82540 &&
+ if (adapter->hw.mac_type >= e1000_82540 &&
adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
- if(manc & E1000_MANC_SMBUS_EN) {
+ if (manc & E1000_MANC_SMBUS_EN) {
manc |= E1000_MANC_ARP_EN;
E1000_WRITE_REG(&adapter->hw, MANC, manc);
}
@@ -900,7 +960,7 @@ e1000_remove(struct pci_dev *pdev)
__dev_put(&adapter->polling_netdev[i]);
#endif
- if(!e1000_check_phy_reset_block(&adapter->hw))
+ if (!e1000_check_phy_reset_block(&adapter->hw))
e1000_phy_hw_reset(&adapter->hw);
kfree(adapter->tx_ring);
@@ -959,19 +1019,19 @@ e1000_sw_init(struct e1000_adapter *adapter)
/* identify the MAC */
- if(e1000_set_mac_type(hw)) {
+ if (e1000_set_mac_type(hw)) {
DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
return -EIO;
}
/* initialize eeprom parameters */
- if(e1000_init_eeprom_params(hw)) {
+ if (e1000_init_eeprom_params(hw)) {
E1000_ERR("EEPROM initialization failed\n");
return -EIO;
}
- switch(hw->mac_type) {
+ switch (hw->mac_type) {
default:
break;
case e1000_82541:
@@ -990,7 +1050,7 @@ e1000_sw_init(struct e1000_adapter *adapter)
/* Copper options */
- if(hw->media_type == e1000_media_type_copper) {
+ if (hw->media_type == e1000_media_type_copper) {
hw->mdix = AUTO_ALL_MODES;
hw->disable_polarity_correction = FALSE;
hw->master_slave = E1000_MASTER_SLAVE;
@@ -1166,10 +1226,10 @@ e1000_open(struct net_device *netdev)
if ((err = e1000_setup_all_rx_resources(adapter)))
goto err_setup_rx;
- if((err = e1000_up(adapter)))
+ if ((err = e1000_up(adapter)))
goto err_up;
adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
- if((adapter->hw.mng_cookie.status &
+ if ((adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
e1000_update_mng_vlan(adapter);
}
@@ -1214,7 +1274,7 @@ e1000_close(struct net_device *netdev)
e1000_free_all_tx_resources(adapter);
e1000_free_all_rx_resources(adapter);
- if((adapter->hw.mng_cookie.status &
+ if ((adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
}
@@ -1269,7 +1329,7 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter,
size = sizeof(struct e1000_buffer) * txdr->count;
txdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
- if(!txdr->buffer_info) {
+ if (!txdr->buffer_info) {
DPRINTK(PROBE, ERR,
"Unable to allocate memory for the transmit descriptor ring\n");
return -ENOMEM;
@@ -1282,7 +1342,7 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter,
E1000_ROUNDUP(txdr->size, 4096);
txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
- if(!txdr->desc) {
+ if (!txdr->desc) {
setup_tx_desc_die:
vfree(txdr->buffer_info);
DPRINTK(PROBE, ERR,
@@ -1298,8 +1358,8 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter,
"at %p\n", txdr->size, txdr->desc);
/* Try again, without freeing the previous */
txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
- if(!txdr->desc) {
/* Failed allocation, critical failure */
+ if (!txdr->desc) {
pci_free_consistent(pdev, txdr->size, olddesc, olddma);
goto setup_tx_desc_die;
}
@@ -1499,7 +1559,7 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter,
size = sizeof(struct e1000_ps_page) * rxdr->count;
rxdr->ps_page = kmalloc(size, GFP_KERNEL);
- if(!rxdr->ps_page) {
+ if (!rxdr->ps_page) {
vfree(rxdr->buffer_info);
DPRINTK(PROBE, ERR,
"Unable to allocate memory for the receive descriptor ring\n");
@@ -1509,7 +1569,7 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter,
size = sizeof(struct e1000_ps_page_dma) * rxdr->count;
rxdr->ps_page_dma = kmalloc(size, GFP_KERNEL);
- if(!rxdr->ps_page_dma) {
+ if (!rxdr->ps_page_dma) {
vfree(rxdr->buffer_info);
kfree(rxdr->ps_page);
DPRINTK(PROBE, ERR,
@@ -1518,7 +1578,7 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter,
}
memset(rxdr->ps_page_dma, 0, size);
- if(adapter->hw.mac_type <= e1000_82547_rev_2)
+ if (adapter->hw.mac_type <= e1000_82547_rev_2)
desc_len = sizeof(struct e1000_rx_desc);
else
desc_len = sizeof(union e1000_rx_desc_packet_split);
@@ -1621,7 +1681,7 @@ e1000_setup_rctl(struct e1000_adapter *adapter)
{
uint32_t rctl, rfctl;
uint32_t psrctl = 0;
-#ifdef CONFIG_E1000_PACKET_SPLIT
+#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
uint32_t pages = 0;
#endif
@@ -1647,32 +1707,17 @@ e1000_setup_rctl(struct e1000_adapter *adapter)
rctl |= E1000_RCTL_LPE;
/* Setup buffer sizes */
- if(adapter->hw.mac_type >= e1000_82571) {
+ if (adapter->hw.mac_type >= e1000_82571) {
/* We can now specify buffers in 1K increments.
* BSIZE and BSEX are ignored in this case. */
rctl |= adapter->rx_buffer_len << 0x11;
} else {
rctl &= ~E1000_RCTL_SZ_4096;
- rctl |= E1000_RCTL_BSEX;
- switch (adapter->rx_buffer_len) {
- case E1000_RXBUFFER_2048:
- default:
- rctl |= E1000_RCTL_SZ_2048;
- rctl &= ~E1000_RCTL_BSEX;
- break;
- case E1000_RXBUFFER_4096:
- rctl |= E1000_RCTL_SZ_4096;
- break;
- case E1000_RXBUFFER_8192:
- rctl |= E1000_RCTL_SZ_8192;
- break;
- case E1000_RXBUFFER_16384:
- rctl |= E1000_RCTL_SZ_16384;
- break;
- }
+ rctl &= ~E1000_RCTL_BSEX;
+ rctl |= E1000_RCTL_SZ_2048;
}
-#ifdef CONFIG_E1000_PACKET_SPLIT
+#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
/* 82571 and greater support packet-split where the protocol
* header is placed in skb->data and the packet data is
* placed in pages hanging off of skb_shinfo(skb)->nr_frags.
@@ -1696,7 +1741,7 @@ e1000_setup_rctl(struct e1000_adapter *adapter)
E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
rctl |= E1000_RCTL_DTYP_PS | E1000_RCTL_SECRC;
-
+
psrctl |= adapter->rx_ps_bsize0 >>
E1000_PSRCTL_BSIZE0_SHIFT;
@@ -1758,7 +1803,7 @@ e1000_configure_rx(struct e1000_adapter *adapter)
if (hw->mac_type >= e1000_82540) {
E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
- if(adapter->itr > 1)
+ if (adapter->itr > 1)
E1000_WRITE_REG(hw, ITR,
1000000000 / (adapter->itr * 256));
}
@@ -1847,13 +1892,13 @@ e1000_configure_rx(struct e1000_adapter *adapter)
/* Enable 82543 Receive Checksum Offload for TCP and UDP */
if (hw->mac_type >= e1000_82543) {
rxcsum = E1000_READ_REG(hw, RXCSUM);
- if(adapter->rx_csum == TRUE) {
+ if (adapter->rx_csum == TRUE) {
rxcsum |= E1000_RXCSUM_TUOFL;
/* Enable 82571 IPv4 payload checksum for UDP fragments
* Must be used in conjunction with packet-split. */
- if ((hw->mac_type >= e1000_82571) &&
- (adapter->rx_ps_pages)) {
+ if ((hw->mac_type >= e1000_82571) &&
+ (adapter->rx_ps_pages)) {
rxcsum |= E1000_RXCSUM_IPPCSE;
}
} else {
@@ -1915,7 +1960,7 @@ static inline void
e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
struct e1000_buffer *buffer_info)
{
- if(buffer_info->dma) {
+ if (buffer_info->dma) {
pci_unmap_page(adapter->pdev,
buffer_info->dma,
buffer_info->length,
@@ -1942,7 +1987,7 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter,
/* Free all the Tx ring sk_buffs */
- for(i = 0; i < tx_ring->count; i++) {
+ for (i = 0; i < tx_ring->count; i++) {
buffer_info = &tx_ring->buffer_info[i];
e1000_unmap_and_free_tx_resource(adapter, buffer_info);
}
@@ -2038,10 +2083,9 @@ e1000_clean_rx_ring(struct e1000_adapter *adapter,
unsigned int i, j;
/* Free all the Rx ring sk_buffs */
-
- for(i = 0; i < rx_ring->count; i++) {
+ for (i = 0; i < rx_ring->count; i++) {
buffer_info = &rx_ring->buffer_info[i];
- if(buffer_info->skb) {
+ if (buffer_info->skb) {
pci_unmap_single(pdev,
buffer_info->dma,
buffer_info->length,
@@ -2122,7 +2166,7 @@ e1000_enter_82542_rst(struct e1000_adapter *adapter)
E1000_WRITE_FLUSH(&adapter->hw);
mdelay(5);
- if(netif_running(netdev))
+ if (netif_running(netdev))
e1000_clean_all_rx_rings(adapter);
}
@@ -2138,13 +2182,13 @@ e1000_leave_82542_rst(struct e1000_adapter *adapter)
E1000_WRITE_FLUSH(&adapter->hw);
mdelay(5);
- if(adapter->hw.pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ if (adapter->hw.pci_cmd_word & PCI_COMMAND_INVALIDATE)
e1000_pci_set_mwi(&adapter->hw);
- if(netif_running(netdev)) {
- e1000_configure_rx(adapter);
+ if (netif_running(netdev)) {
/* No need to loop, because 82542 supports only 1 queue */
struct e1000_rx_ring *ring = &adapter->rx_ring[0];
+ e1000_configure_rx(adapter);
adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
}
}
@@ -2163,12 +2207,12 @@ e1000_set_mac(struct net_device *netdev, void *p)
struct e1000_adapter *adapter = netdev_priv(netdev);
struct sockaddr *addr = p;
- if(!is_valid_ether_addr(addr->sa_data))
+ if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
/* 82542 2.0 needs to be in reset to write receive address registers */
- if(adapter->hw.mac_type == e1000_82542_rev2_0)
+ if (adapter->hw.mac_type == e1000_82542_rev2_0)
e1000_enter_82542_rst(adapter);
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
@@ -2182,17 +2226,17 @@ e1000_set_mac(struct net_device *netdev, void *p)
/* activate the work around */
adapter->hw.laa_is_present = 1;
- /* Hold a copy of the LAA in RAR[14] This is done so that
- * between the time RAR[0] gets clobbered and the time it
- * gets fixed (in e1000_watchdog), the actual LAA is in one
+ /* Hold a copy of the LAA in RAR[14] This is done so that
+ * between the time RAR[0] gets clobbered and the time it
+ * gets fixed (in e1000_watchdog), the actual LAA is in one
* of the RARs and no incoming packets directed to this port
- * are dropped. Eventaully the LAA will be in RAR[0] and
+ * are dropped. Eventaully the LAA will be in RAR[0] and
* RAR[14] */
- e1000_rar_set(&adapter->hw, adapter->hw.mac_addr,
+ e1000_rar_set(&adapter->hw, adapter->hw.mac_addr,
E1000_RAR_ENTRIES - 1);
}
- if(adapter->hw.mac_type == e1000_82542_rev2_0)
+ if (adapter->hw.mac_type == e1000_82542_rev2_0)
e1000_leave_82542_rst(adapter);
return 0;
@@ -2226,9 +2270,9 @@ e1000_set_multi(struct net_device *netdev)
rctl = E1000_READ_REG(hw, RCTL);
- if(netdev->flags & IFF_PROMISC) {
+ if (netdev->flags & IFF_PROMISC) {
rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
- } else if(netdev->flags & IFF_ALLMULTI) {
+ } else if (netdev->flags & IFF_ALLMULTI) {
rctl |= E1000_RCTL_MPE;
rctl &= ~E1000_RCTL_UPE;
} else {
@@ -2239,7 +2283,7 @@ e1000_set_multi(struct net_device *netdev)
/* 82542 2.0 needs to be in reset to write receive address registers */
- if(hw->mac_type == e1000_82542_rev2_0)
+ if (hw->mac_type == e1000_82542_rev2_0)
e1000_enter_82542_rst(adapter);
/* load the first 14 multicast address into the exact filters 1-14
@@ -2249,7 +2293,7 @@ e1000_set_multi(struct net_device *netdev)
*/
mc_ptr = netdev->mc_list;
- for(i = 1; i < rar_entries; i++) {
+ for (i = 1; i < rar_entries; i++) {
if (mc_ptr) {
e1000_rar_set(hw, mc_ptr->dmi_addr, i);
mc_ptr = mc_ptr->next;
@@ -2261,17 +2305,17 @@ e1000_set_multi(struct net_device *netdev)
/* clear the old settings from the multicast hash table */
- for(i = 0; i < E1000_NUM_MTA_REGISTERS; i++)
+ for (i = 0; i < E1000_NUM_MTA_REGISTERS; i++)
E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
/* load any remaining addresses into the hash table */
- for(; mc_ptr; mc_ptr = mc_ptr->next) {
+ for (; mc_ptr; mc_ptr = mc_ptr->next) {
hash_value = e1000_hash_mc_addr(hw, mc_ptr->dmi_addr);
e1000_mta_set(hw, hash_value);
}
- if(hw->mac_type == e1000_82542_rev2_0)
+ if (hw->mac_type == e1000_82542_rev2_0)
e1000_leave_82542_rst(adapter);
}
@@ -2297,8 +2341,8 @@ e1000_82547_tx_fifo_stall(unsigned long data)
struct net_device *netdev = adapter->netdev;
uint32_t tctl;
- if(atomic_read(&adapter->tx_fifo_stall)) {
- if((E1000_READ_REG(&adapter->hw, TDT) ==
+ if (atomic_read(&adapter->tx_fifo_stall)) {
+ if ((E1000_READ_REG(&adapter->hw, TDT) ==
E1000_READ_REG(&adapter->hw, TDH)) &&
(E1000_READ_REG(&adapter->hw, TDFT) ==
E1000_READ_REG(&adapter->hw, TDFH)) &&
@@ -2350,18 +2394,18 @@ e1000_watchdog_task(struct e1000_adapter *adapter)
e1000_check_for_link(&adapter->hw);
if (adapter->hw.mac_type == e1000_82573) {
e1000_enable_tx_pkt_filtering(&adapter->hw);
- if(adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
+ if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
e1000_update_mng_vlan(adapter);
- }
+ }
- if((adapter->hw.media_type == e1000_media_type_internal_serdes) &&
+ if ((adapter->hw.media_type == e1000_media_type_internal_serdes) &&
!(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE))
link = !adapter->hw.serdes_link_down;
else
link = E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU;
- if(link) {
- if(!netif_carrier_ok(netdev)) {
+ if (link) {
+ if (!netif_carrier_ok(netdev)) {
e1000_get_speed_and_duplex(&adapter->hw,
&adapter->link_speed,
&adapter->link_duplex);
@@ -2392,7 +2436,7 @@ e1000_watchdog_task(struct e1000_adapter *adapter)
adapter->smartspeed = 0;
}
} else {
- if(netif_carrier_ok(netdev)) {
+ if (netif_carrier_ok(netdev)) {
adapter->link_speed = 0;
adapter->link_duplex = 0;
DPRINTK(LINK, INFO, "NIC Link is Down\n");
@@ -2432,12 +2476,12 @@ e1000_watchdog_task(struct e1000_adapter *adapter)
}
/* Dynamic mode for Interrupt Throttle Rate (ITR) */
- if(adapter->hw.mac_type >= e1000_82540 && adapter->itr == 1) {
+ if (adapter->hw.mac_type >= e1000_82540 && adapter->itr == 1) {
/* Symmetric Tx/Rx gets a reduced ITR=2000; Total
* asymmetrical Tx or Rx gets ITR=8000; everyone
* else is between 2000-8000. */
uint32_t goc = (adapter->gotcl + adapter->gorcl) / 10000;
- uint32_t dif = (adapter->gotcl > adapter->gorcl ?
+ uint32_t dif = (adapter->gotcl > adapter->gorcl ?
adapter->gotcl - adapter->gorcl :
adapter->gorcl - adapter->gotcl) / 10000;
uint32_t itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
@@ -2450,7 +2494,7 @@ e1000_watchdog_task(struct e1000_adapter *adapter)
/* Force detection of hung controller every watchdog period */
adapter->detect_tx_hung = TRUE;
- /* With 82571 controllers, LAA may be overwritten due to controller
+ /* With 82571 controllers, LAA may be overwritten due to controller
* reset from the other port. Set the appropriate LAA in RAR[0] */
if (adapter->hw.mac_type == e1000_82571 && adapter->hw.laa_is_present)
e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
@@ -2479,7 +2523,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
int err;
- if(skb_shinfo(skb)->tso_size) {
+ if (skb_shinfo(skb)->tso_size) {
if (skb_header_cloned(skb)) {
err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
if (err)
@@ -2488,7 +2532,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
mss = skb_shinfo(skb)->tso_size;
- if(skb->protocol == ntohs(ETH_P_IP)) {
+ if (skb->protocol == ntohs(ETH_P_IP)) {
skb->nh.iph->tot_len = 0;
skb->nh.iph->check = 0;
skb->h.th->check =
@@ -2500,7 +2544,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
cmd_length = E1000_TXD_CMD_IP;
ipcse = skb->h.raw - skb->data - 1;
#ifdef NETIF_F_TSO_IPV6
- } else if(skb->protocol == ntohs(ETH_P_IPV6)) {
+ } else if (skb->protocol == ntohs(ETH_P_IPV6)) {
skb->nh.ipv6h->payload_len = 0;
skb->h.th->check =
~csum_ipv6_magic(&skb->nh.ipv6h->saddr,
@@ -2555,7 +2599,7 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
unsigned int i;
uint8_t css;
- if(likely(skb->ip_summed == CHECKSUM_HW)) {
+ if (likely(skb->ip_summed == CHECKSUM_HW)) {
css = skb->h.raw - skb->data;
i = tx_ring->next_to_use;
@@ -2595,7 +2639,7 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
i = tx_ring->next_to_use;
- while(len) {
+ while (len) {
buffer_info = &tx_ring->buffer_info[i];
size = min(len, max_per_txd);
#ifdef NETIF_F_TSO
@@ -2611,7 +2655,7 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
/* Workaround for premature desc write-backs
* in TSO mode. Append 4-byte sentinel desc */
- if(unlikely(mss && !nr_frags && size == len && size > 8))
+ if (unlikely(mss && !nr_frags && size == len && size > 8))
size -= 4;
#endif
/* work-around for errata 10 and it applies
@@ -2619,13 +2663,13 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
* The fix is to make sure that the first descriptor of a
* packet is smaller than 2048 - 16 - 16 (or 2016) bytes
*/
- if(unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
+ if (unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
(size > 2015) && count == 0))
size = 2015;
-
+
/* Workaround for potential 82544 hang in PCI-X. Avoid
* terminating buffers within evenly-aligned dwords. */
- if(unlikely(adapter->pcix_82544 &&
+ if (unlikely(adapter->pcix_82544 &&
!((unsigned long)(skb->data + offset + size - 1) & 4) &&
size > 4))
size -= 4;
@@ -2641,29 +2685,29 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
len -= size;
offset += size;
count++;
- if(unlikely(++i == tx_ring->count)) i = 0;
+ if (unlikely(++i == tx_ring->count)) i = 0;
}
- for(f = 0; f < nr_frags; f++) {
+ for (f = 0; f < nr_frags; f++) {
struct skb_frag_struct *frag;
frag = &skb_shinfo(skb)->frags[f];
len = frag->size;
offset = frag->page_offset;
- while(len) {
+ while (len) {
buffer_info = &tx_ring->buffer_info[i];
size = min(len, max_per_txd);
#ifdef NETIF_F_TSO
/* Workaround for premature desc write-backs
* in TSO mode. Append 4-byte sentinel desc */
- if(unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
+ if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
size -= 4;
#endif
/* Workaround for potential 82544 hang in PCI-X.
* Avoid terminating buffers within evenly-aligned
* dwords. */
- if(unlikely(adapter->pcix_82544 &&
+ if (unlikely(adapter->pcix_82544 &&
!((unsigned long)(frag->page+offset+size-1) & 4) &&
size > 4))
size -= 4;
@@ -2680,7 +2724,7 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
len -= size;
offset += size;
count++;
- if(unlikely(++i == tx_ring->count)) i = 0;
+ if (unlikely(++i == tx_ring->count)) i = 0;
}
}
@@ -2700,35 +2744,35 @@ e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
uint32_t txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
unsigned int i;
- if(likely(tx_flags & E1000_TX_FLAGS_TSO)) {
+ if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
E1000_TXD_CMD_TSE;
txd_upper |= E1000_TXD_POPTS_TXSM << 8;
- if(likely(tx_flags & E1000_TX_FLAGS_IPV4))
+ if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
txd_upper |= E1000_TXD_POPTS_IXSM << 8;
}
- if(likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
+ if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
txd_upper |= E1000_TXD_POPTS_TXSM << 8;
}
- if(unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
+ if (unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
txd_lower |= E1000_TXD_CMD_VLE;
txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
}
i = tx_ring->next_to_use;
- while(count--) {
+ while (count--) {
buffer_info = &tx_ring->buffer_info[i];
tx_desc = E1000_TX_DESC(*tx_ring, i);
tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
tx_desc->lower.data =
cpu_to_le32(txd_lower | buffer_info->length);
tx_desc->upper.data = cpu_to_le32(txd_upper);
- if(unlikely(++i == tx_ring->count)) i = 0;
+ if (unlikely(++i == tx_ring->count)) i = 0;
}
tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
@@ -2763,20 +2807,20 @@ e1000_82547_fifo_workaround(struct e1000_adapter *adapter, struct sk_buff *skb)
E1000_ROUNDUP(skb_fifo_len, E1000_FIFO_HDR);
- if(adapter->link_duplex != HALF_DUPLEX)
+ if (adapter->link_duplex != HALF_DUPLEX)
goto no_fifo_stall_required;
- if(atomic_read(&adapter->tx_fifo_stall))
+ if (atomic_read(&adapter->tx_fifo_stall))
return 1;
- if(skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
+ if (skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
atomic_set(&adapter->tx_fifo_stall, 1);
return 1;
}
no_fifo_stall_required:
adapter->tx_fifo_head += skb_fifo_len;
- if(adapter->tx_fifo_head >= adapter->tx_fifo_size)
+ if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
adapter->tx_fifo_head -= adapter->tx_fifo_size;
return 0;
}
@@ -2787,27 +2831,27 @@ e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb)
{
struct e1000_hw *hw = &adapter->hw;
uint16_t length, offset;
- if(vlan_tx_tag_present(skb)) {
- if(!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
+ if (vlan_tx_tag_present(skb)) {
+ if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
( adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
return 0;
}
- if ((skb->len > MINIMUM_DHCP_PACKET_SIZE) && (!skb->protocol)) {
+ if ((skb->len > MINIMUM_DHCP_PACKET_SIZE) && (!skb->protocol)) {
struct ethhdr *eth = (struct ethhdr *) skb->data;
- if((htons(ETH_P_IP) == eth->h_proto)) {
- const struct iphdr *ip =
+ if ((htons(ETH_P_IP) == eth->h_proto)) {
+ const struct iphdr *ip =
(struct iphdr *)((uint8_t *)skb->data+14);
- if(IPPROTO_UDP == ip->protocol) {
- struct udphdr *udp =
- (struct udphdr *)((uint8_t *)ip +
+ if (IPPROTO_UDP == ip->protocol) {
+ struct udphdr *udp =
+ (struct udphdr *)((uint8_t *)ip +
(ip->ihl << 2));
- if(ntohs(udp->dest) == 67) {
+ if (ntohs(udp->dest) == 67) {
offset = (uint8_t *)udp + 8 - skb->data;
length = skb->len - offset;
return e1000_mng_write_dhcp_info(hw,
- (uint8_t *)udp + 8,
+ (uint8_t *)udp + 8,
length);
}
}
@@ -2830,7 +2874,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
unsigned int nr_frags = 0;
unsigned int mss = 0;
int count = 0;
- int tso;
+ int tso;
unsigned int f;
len -= skb->data_len;
@@ -2853,7 +2897,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
* 4 = ceil(buffer len/mss). To make sure we don't
* overrun the FIFO, adjust the max buffer len if mss
* drops. */
- if(mss) {
+ if (mss) {
uint8_t hdr_len;
max_per_txd = min(mss << 2, max_per_txd);
max_txd_pwr = fls(max_per_txd) - 1;
@@ -2876,12 +2920,12 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
}
}
- if((mss) || (skb->ip_summed == CHECKSUM_HW))
/* reserve a descriptor for the offload context */
+ if ((mss) || (skb->ip_summed == CHECKSUM_HW))
count++;
count++;
#else
- if(skb->ip_summed == CHECKSUM_HW)
+ if (skb->ip_summed == CHECKSUM_HW)
count++;
#endif
@@ -2894,24 +2938,24 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
count += TXD_USE_COUNT(len, max_txd_pwr);
- if(adapter->pcix_82544)
+ if (adapter->pcix_82544)
count++;
- /* work-around for errata 10 and it applies to all controllers
+ /* work-around for errata 10 and it applies to all controllers
* in PCI-X mode, so add one more descriptor to the count
*/
- if(unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
+ if (unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
(len > 2015)))
count++;
nr_frags = skb_shinfo(skb)->nr_frags;
- for(f = 0; f < nr_frags; f++)
+ for (f = 0; f < nr_frags; f++)
count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
max_txd_pwr);
- if(adapter->pcix_82544)
+ if (adapter->pcix_82544)
count += nr_frags;
- if(adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == e1000_82573) )
+ if (adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == e1000_82573) )
e1000_transfer_dhcp_info(adapter, skb);
local_irq_save(flags);
@@ -2929,8 +2973,8 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
return NETDEV_TX_BUSY;
}
- if(unlikely(adapter->hw.mac_type == e1000_82547)) {
- if(unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
+ if (unlikely(adapter->hw.mac_type == e1000_82547)) {
+ if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
netif_stop_queue(netdev);
mod_timer(&adapter->tx_fifo_stall_timer, jiffies);
spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
@@ -2938,13 +2982,13 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
}
}
- if(unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
+ if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
tx_flags |= E1000_TX_FLAGS_VLAN;
tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
}
first = tx_ring->next_to_use;
-
+
tso = e1000_tso(adapter, tx_ring, skb);
if (tso < 0) {
dev_kfree_skb_any(skb);
@@ -3033,9 +3077,9 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu)
struct e1000_adapter *adapter = netdev_priv(netdev);
int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
- if((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
- (max_frame > MAX_JUMBO_FRAME_SIZE)) {
- DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
+ if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
+ (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
return -EINVAL;
}
@@ -3083,7 +3127,7 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu)
netdev->mtu = new_mtu;
- if(netif_running(netdev)) {
+ if (netif_running(netdev)) {
e1000_down(adapter);
e1000_up(adapter);
}
@@ -3170,7 +3214,7 @@ e1000_update_stats(struct e1000_adapter *adapter)
hw->collision_delta = E1000_READ_REG(hw, COLC);
adapter->stats.colc += hw->collision_delta;
- if(hw->mac_type >= e1000_82543) {
+ if (hw->mac_type >= e1000_82543) {
adapter->stats.algnerrc += E1000_READ_REG(hw, ALGNERRC);
adapter->stats.rxerrc += E1000_READ_REG(hw, RXERRC);
adapter->stats.tncrs += E1000_READ_REG(hw, TNCRS);
@@ -3178,7 +3222,7 @@ e1000_update_stats(struct e1000_adapter *adapter)
adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC);
adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC);
}
- if(hw->mac_type > e1000_82547_rev_2) {
+ if (hw->mac_type > e1000_82547_rev_2) {
adapter->stats.iac += E1000_READ_REG(hw, IAC);
adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
@@ -3222,14 +3266,14 @@ e1000_update_stats(struct e1000_adapter *adapter)
/* Phy Stats */
- if(hw->media_type == e1000_media_type_copper) {
- if((adapter->link_speed == SPEED_1000) &&
+ if (hw->media_type == e1000_media_type_copper) {
+ if ((adapter->link_speed == SPEED_1000) &&
(!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
adapter->phy_stats.idle_errors += phy_tmp;
}
- if((hw->mac_type <= e1000_82546) &&
+ if ((hw->mac_type <= e1000_82546) &&
(hw->phy_type == e1000_phy_m88) &&
!e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
adapter->phy_stats.receive_errors += phy_tmp;
@@ -3294,7 +3338,7 @@ e1000_intr(int irq, void *data, struct pt_regs *regs)
return IRQ_NONE; /* Not our interrupt */
}
- if(unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
+ if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
hw->get_link_status = 1;
mod_timer(&adapter->watchdog_timer, jiffies);
}
@@ -3326,26 +3370,26 @@ e1000_intr(int irq, void *data, struct pt_regs *regs)
#else /* if !CONFIG_E1000_NAPI */
/* Writing IMC and IMS is needed for 82547.
- Due to Hub Link bus being occupied, an interrupt
- de-assertion message is not able to be sent.
- When an interrupt assertion message is generated later,
- two messages are re-ordered and sent out.
- That causes APIC to think 82547 is in de-assertion
- state, while 82547 is in assertion state, resulting
- in dead lock. Writing IMC forces 82547 into
- de-assertion state.
- */
- if(hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2){
+ * Due to Hub Link bus being occupied, an interrupt
+ * de-assertion message is not able to be sent.
+ * When an interrupt assertion message is generated later,
+ * two messages are re-ordered and sent out.
+ * That causes APIC to think 82547 is in de-assertion
+ * state, while 82547 is in assertion state, resulting
+ * in dead lock. Writing IMC forces 82547 into
+ * de-assertion state.
+ */
+ if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2) {
atomic_inc(&adapter->irq_sem);
E1000_WRITE_REG(hw, IMC, ~0);
}
- for(i = 0; i < E1000_MAX_INTR; i++)
- if(unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
+ for (i = 0; i < E1000_MAX_INTR; i++)
+ if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
!e1000_clean_tx_irq(adapter, adapter->tx_ring)))
break;
- if(hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
+ if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
e1000_irq_enable(adapter);
#endif /* CONFIG_E1000_NAPI */
@@ -3397,9 +3441,9 @@ e1000_clean(struct net_device *poll_dev, int *budget)
*budget -= work_done;
poll_dev->quota -= work_done;
-
+
/* If no Tx and not enough Rx work done, exit the polling mode */
- if((!tx_cleaned && (work_done == 0)) ||
+ if ((!tx_cleaned && (work_done == 0)) ||
!netif_running(adapter->netdev)) {
quit_polling:
netif_rx_complete(poll_dev);
@@ -3431,7 +3475,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
eop_desc = E1000_TX_DESC(*tx_ring, eop);
while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
- for(cleaned = FALSE; !cleaned; ) {
+ for (cleaned = FALSE; !cleaned; ) {
tx_desc = E1000_TX_DESC(*tx_ring, i);
buffer_info = &tx_ring->buffer_info[i];
cleaned = (i == eop);
@@ -3442,7 +3486,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
e1000_unmap_and_free_tx_resource(adapter, buffer_info);
memset(tx_desc, 0, sizeof(struct e1000_tx_desc));
- if(unlikely(++i == tx_ring->count)) i = 0;
+ if (unlikely(++i == tx_ring->count)) i = 0;
}
#ifdef CONFIG_E1000_MQ
@@ -3457,7 +3501,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
spin_lock(&tx_ring->tx_lock);
- if(unlikely(cleaned && netif_queue_stopped(netdev) &&
+ if (unlikely(cleaned && netif_queue_stopped(netdev) &&
netif_carrier_ok(netdev)))
netif_wake_queue(netdev);
@@ -3519,21 +3563,21 @@ e1000_rx_checksum(struct e1000_adapter *adapter,
skb->ip_summed = CHECKSUM_NONE;
/* 82543 or newer only */
- if(unlikely(adapter->hw.mac_type < e1000_82543)) return;
+ if (unlikely(adapter->hw.mac_type < e1000_82543)) return;
/* Ignore Checksum bit is set */
- if(unlikely(status & E1000_RXD_STAT_IXSM)) return;
+ if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
/* TCP/UDP checksum error bit is set */
- if(unlikely(errors & E1000_RXD_ERR_TCPE)) {
+ if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
/* let the stack verify checksum errors */
adapter->hw_csum_err++;
return;
}
/* TCP/UDP Checksum has not been calculated */
- if(adapter->hw.mac_type <= e1000_82547_rev_2) {
- if(!(status & E1000_RXD_STAT_TCPCS))
+ if (adapter->hw.mac_type <= e1000_82547_rev_2) {
+ if (!(status & E1000_RXD_STAT_TCPCS))
return;
} else {
- if(!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
+ if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
return;
}
/* It must be a TCP or UDP packet with a valid checksum */
@@ -3569,9 +3613,8 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
{
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
- struct e1000_rx_desc *rx_desc;
- struct e1000_buffer *buffer_info;
- struct sk_buff *skb;
+ struct e1000_rx_desc *rx_desc, *next_rxd;
+ struct e1000_buffer *buffer_info, *next_buffer;
unsigned long flags;
uint32_t length;
uint8_t last_byte;
@@ -3581,16 +3624,25 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
i = rx_ring->next_to_clean;
rx_desc = E1000_RX_DESC(*rx_ring, i);
+ buffer_info = &rx_ring->buffer_info[i];
- while(rx_desc->status & E1000_RXD_STAT_DD) {
- buffer_info = &rx_ring->buffer_info[i];
+ while (rx_desc->status & E1000_RXD_STAT_DD) {
+ struct sk_buff *skb, *next_skb;
u8 status;
#ifdef CONFIG_E1000_NAPI
- if(*work_done >= work_to_do)
+ if (*work_done >= work_to_do)
break;
(*work_done)++;
#endif
status = rx_desc->status;
+ skb = buffer_info->skb;
+ buffer_info->skb = NULL;
+
+ if (++i == rx_ring->count) i = 0;
+ next_rxd = E1000_RX_DESC(*rx_ring, i);
+ next_buffer = &rx_ring->buffer_info[i];
+ next_skb = next_buffer->skb;
+
cleaned = TRUE;
cleaned_count++;
pci_unmap_single(pdev,
@@ -3598,20 +3650,50 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
buffer_info->length,
PCI_DMA_FROMDEVICE);
- skb = buffer_info->skb;
length = le16_to_cpu(rx_desc->length);
- if(unlikely(!(rx_desc->status & E1000_RXD_STAT_EOP))) {
- /* All receives must fit into a single buffer */
- E1000_DBG("%s: Receive packet consumed multiple"
- " buffers\n", netdev->name);
- dev_kfree_skb_irq(skb);
+ skb_put(skb, length);
+
+ if (!(status & E1000_RXD_STAT_EOP)) {
+ if (!rx_ring->rx_skb_top) {
+ rx_ring->rx_skb_top = skb;
+ rx_ring->rx_skb_top->len = length;
+ rx_ring->rx_skb_prev = skb;
+ } else {
+ if (skb_shinfo(rx_ring->rx_skb_top)->frag_list) {
+ rx_ring->rx_skb_prev->next = skb;
+ skb->prev = rx_ring->rx_skb_prev;
+ } else {
+ skb_shinfo(rx_ring->rx_skb_top)->frag_list = skb;
+ }
+ rx_ring->rx_skb_prev = skb;
+ rx_ring->rx_skb_top->data_len += length;
+ }
goto next_desc;
+ } else {
+ if (rx_ring->rx_skb_top) {
+ if (skb_shinfo(rx_ring->rx_skb_top)
+ ->frag_list) {
+ rx_ring->rx_skb_prev->next = skb;
+ skb->prev = rx_ring->rx_skb_prev;
+ } else
+ skb_shinfo(rx_ring->rx_skb_top)
+ ->frag_list = skb;
+
+ rx_ring->rx_skb_top->data_len += length;
+ rx_ring->rx_skb_top->len +=
+ rx_ring->rx_skb_top->data_len;
+
+ skb = rx_ring->rx_skb_top;
+ multi_descriptor = TRUE;
+ rx_ring->rx_skb_top = NULL;
+ rx_ring->rx_skb_prev = NULL;
+ }
}
- if(unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
+ if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
last_byte = *(skb->data + length - 1);
- if(TBI_ACCEPT(&adapter->hw, rx_desc->status,
+ if (TBI_ACCEPT(&adapter->hw, status,
rx_desc->errors, length, last_byte)) {
spin_lock_irqsave(&adapter->stats_lock, flags);
e1000_tbi_adjust_stats(&adapter->hw,
@@ -3656,9 +3738,10 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
(uint32_t)(status) |
((uint32_t)(rx_desc->errors) << 24),
rx_desc->csum, skb);
+
skb->protocol = eth_type_trans(skb, netdev);
#ifdef CONFIG_E1000_NAPI
- if(unlikely(adapter->vlgrp &&
+ if (unlikely(adapter->vlgrp &&
(status & E1000_RXD_STAT_VP))) {
vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
le16_to_cpu(rx_desc->special) &
@@ -3667,8 +3750,8 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
netif_receive_skb(skb);
}
#else /* CONFIG_E1000_NAPI */
- if(unlikely(adapter->vlgrp &&
- (rx_desc->status & E1000_RXD_STAT_VP))) {
+ if (unlikely(adapter->vlgrp &&
+ (status & E1000_RXD_STAT_VP))) {
vlan_hwaccel_rx(skb, adapter->vlgrp,
le16_to_cpu(rx_desc->special) &
E1000_RXD_SPC_VLAN_MASK);
@@ -3691,6 +3774,8 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
cleaned_count = 0;
}
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
}
rx_ring->next_to_clean = i;
@@ -3716,13 +3801,13 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring)
#endif
{
- union e1000_rx_desc_packet_split *rx_desc;
+ union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
- struct e1000_buffer *buffer_info;
+ struct e1000_buffer *buffer_info, *next_buffer;
struct e1000_ps_page *ps_page;
struct e1000_ps_page_dma *ps_page_dma;
- struct sk_buff *skb;
+ struct sk_buff *skb, *next_skb;
unsigned int i, j;
uint32_t length, staterr;
int cleaned_count = 0;
@@ -3731,39 +3816,44 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
i = rx_ring->next_to_clean;
rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
+ buffer_info = &rx_ring->buffer_info[i];
- while(staterr & E1000_RXD_STAT_DD) {
- buffer_info = &rx_ring->buffer_info[i];
+ while (staterr & E1000_RXD_STAT_DD) {
ps_page = &rx_ring->ps_page[i];
ps_page_dma = &rx_ring->ps_page_dma[i];
#ifdef CONFIG_E1000_NAPI
- if(unlikely(*work_done >= work_to_do))
+ if (unlikely(*work_done >= work_to_do))
break;
(*work_done)++;
#endif
+ skb = buffer_info->skb;
+
+ if (++i == rx_ring->count) i = 0;
+ next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
+ next_buffer = &rx_ring->buffer_info[i];
+ next_skb = next_buffer->skb;
+
cleaned = TRUE;
cleaned_count++;
pci_unmap_single(pdev, buffer_info->dma,
buffer_info->length,
PCI_DMA_FROMDEVICE);
- skb = buffer_info->skb;
-
- if(unlikely(!(staterr & E1000_RXD_STAT_EOP))) {
+ if (unlikely(!(staterr & E1000_RXD_STAT_EOP))) {
E1000_DBG("%s: Packet Split buffers didn't pick up"
" the full packet\n", netdev->name);
dev_kfree_skb_irq(skb);
goto next_desc;
}
- if(unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
+ if (unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
dev_kfree_skb_irq(skb);
goto next_desc;
}
length = le16_to_cpu(rx_desc->wb.middle.length0);
- if(unlikely(!length)) {
+ if (unlikely(!length)) {
E1000_DBG("%s: Last part of the packet spanning"
" multiple descriptors\n", netdev->name);
dev_kfree_skb_irq(skb);
@@ -3773,8 +3863,8 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
/* Good Receive */
skb_put(skb, length);
- for(j = 0; j < adapter->rx_ps_pages; j++) {
- if(!(length = le16_to_cpu(rx_desc->wb.upper.length[j])))
+ for (j = 0; j < adapter->rx_ps_pages; j++) {
+ if (!(length = le16_to_cpu(rx_desc->wb.upper.length[j])))
break;
pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j],
@@ -3794,15 +3884,11 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
skb->protocol = eth_type_trans(skb, netdev);
- if(likely(rx_desc->wb.upper.header_status &
- E1000_RXDPS_HDRSTAT_HDRSP)) {
+ if (likely(rx_desc->wb.upper.header_status &
+ E1000_RXDPS_HDRSTAT_HDRSP))
adapter->rx_hdr_split++;
-#ifdef HAVE_RX_ZERO_COPY
- skb_shinfo(skb)->zero_copy = TRUE;
-#endif
- }
#ifdef CONFIG_E1000_NAPI
- if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
+ if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
le16_to_cpu(rx_desc->wb.middle.vlan) &
E1000_RXD_SPC_VLAN_MASK);
@@ -3810,7 +3896,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
netif_receive_skb(skb);
}
#else /* CONFIG_E1000_NAPI */
- if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
+ if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
vlan_hwaccel_rx(skb, adapter->vlgrp,
le16_to_cpu(rx_desc->wb.middle.vlan) &
E1000_RXD_SPC_VLAN_MASK);
@@ -3834,6 +3920,9 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
cleaned_count = 0;
}
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+
staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
}
rx_ring->next_to_clean = i;
@@ -3875,7 +3964,7 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
}
- if(unlikely(!skb)) {
+ if (unlikely(!skb)) {
/* Better luck next round */
adapter->alloc_rx_buff_failed++;
break;
@@ -3940,20 +4029,23 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
rx_desc = E1000_RX_DESC(*rx_ring, i);
rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
- if(unlikely((i & ~(E1000_RX_BUFFER_WRITE - 1)) == i)) {
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64). */
- wmb();
- writel(i, adapter->hw.hw_addr + rx_ring->rdt);
- }
-
- if(unlikely(++i == rx_ring->count)) i = 0;
+ if (unlikely(++i == rx_ring->count))
+ i = 0;
buffer_info = &rx_ring->buffer_info[i];
}
- rx_ring->next_to_use = i;
+ if (likely(rx_ring->next_to_use != i)) {
+ rx_ring->next_to_use = i;
+ if (unlikely(i-- == 0))
+ i = (rx_ring->count - 1);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ writel(i, adapter->hw.hw_addr + rx_ring->rdt);
+ }
}
/**
@@ -3983,13 +4075,15 @@ e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
while (cleaned_count--) {
rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
- for(j = 0; j < PS_PAGE_BUFFERS; j++) {
+ for (j = 0; j < PS_PAGE_BUFFERS; j++) {
if (j < adapter->rx_ps_pages) {
if (likely(!ps_page->ps_page[j])) {
ps_page->ps_page[j] =
alloc_page(GFP_ATOMIC);
- if (unlikely(!ps_page->ps_page[j]))
+ if (unlikely(!ps_page->ps_page[j])) {
+ adapter->alloc_rx_buff_failed++;
goto no_buffers;
+ }
ps_page_dma->ps_page_dma[j] =
pci_map_page(pdev,
ps_page->ps_page[j],
@@ -3997,7 +4091,7 @@ e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
PCI_DMA_FROMDEVICE);
}
/* Refresh the desc even if buffer_addrs didn't
- * change because each write-back erases
+ * change because each write-back erases
* this info.
*/
rx_desc->read.buffer_addr[j+1] =
@@ -4008,8 +4102,10 @@ e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
skb = dev_alloc_skb(adapter->rx_ps_bsize0 + NET_IP_ALIGN);
- if(unlikely(!skb))
+ if (unlikely(!skb)) {
+ adapter->alloc_rx_buff_failed++;
break;
+ }
/* Make buffer alignment 2 beyond a 16 byte boundary
* this will result in a 16 byte aligned IP header after
@@ -4027,27 +4123,28 @@ e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
- if(unlikely((i & ~(E1000_RX_BUFFER_WRITE - 1)) == i)) {
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64). */
- wmb();
- /* Hardware increments by 16 bytes, but packet split
- * descriptors are 32 bytes...so we increment tail
- * twice as much.
- */
- writel(i<<1, adapter->hw.hw_addr + rx_ring->rdt);
- }
-
- if(unlikely(++i == rx_ring->count)) i = 0;
+ if (unlikely(++i == rx_ring->count)) i = 0;
buffer_info = &rx_ring->buffer_info[i];
ps_page = &rx_ring->ps_page[i];
ps_page_dma = &rx_ring->ps_page_dma[i];
}
no_buffers:
- rx_ring->next_to_use = i;
+ if (likely(rx_ring->next_to_use != i)) {
+ rx_ring->next_to_use = i;
+ if (unlikely(i-- == 0)) i = (rx_ring->count - 1);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ /* Hardware increments by 16 bytes, but packet split
+ * descriptors are 32 bytes...so we increment tail
+ * twice as much.
+ */
+ writel(i<<1, adapter->hw.hw_addr + rx_ring->rdt);
+ }
}
/**
@@ -4061,24 +4158,24 @@ e1000_smartspeed(struct e1000_adapter *adapter)
uint16_t phy_status;
uint16_t phy_ctrl;
- if((adapter->hw.phy_type != e1000_phy_igp) || !adapter->hw.autoneg ||
+ if ((adapter->hw.phy_type != e1000_phy_igp) || !adapter->hw.autoneg ||
!(adapter->hw.autoneg_advertised & ADVERTISE_1000_FULL))
return;
- if(adapter->smartspeed == 0) {
+ if (adapter->smartspeed == 0) {
/* If Master/Slave config fault is asserted twice,
* we assume back-to-back */
e1000_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
- if(!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+ if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
e1000_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
- if(!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+ if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
e1000_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
- if(phy_ctrl & CR_1000T_MS_ENABLE) {
+ if (phy_ctrl & CR_1000T_MS_ENABLE) {
phy_ctrl &= ~CR_1000T_MS_ENABLE;
e1000_write_phy_reg(&adapter->hw, PHY_1000T_CTRL,
phy_ctrl);
adapter->smartspeed++;
- if(!e1000_phy_setup_autoneg(&adapter->hw) &&
+ if (!e1000_phy_setup_autoneg(&adapter->hw) &&
!e1000_read_phy_reg(&adapter->hw, PHY_CTRL,
&phy_ctrl)) {
phy_ctrl |= (MII_CR_AUTO_NEG_EN |
@@ -4088,12 +4185,12 @@ e1000_smartspeed(struct e1000_adapter *adapter)
}
}
return;
- } else if(adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
+ } else if (adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
/* If still no link, perhaps using 2/3 pair cable */
e1000_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
phy_ctrl |= CR_1000T_MS_ENABLE;
e1000_write_phy_reg(&adapter->hw, PHY_1000T_CTRL, phy_ctrl);
- if(!e1000_phy_setup_autoneg(&adapter->hw) &&
+ if (!e1000_phy_setup_autoneg(&adapter->hw) &&
!e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_ctrl)) {
phy_ctrl |= (MII_CR_AUTO_NEG_EN |
MII_CR_RESTART_AUTO_NEG);
@@ -4101,7 +4198,7 @@ e1000_smartspeed(struct e1000_adapter *adapter)
}
}
/* Restart process after E1000_SMARTSPEED_MAX iterations */
- if(adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
+ if (adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
adapter->smartspeed = 0;
}
@@ -4142,7 +4239,7 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
uint16_t spddplx;
unsigned long flags;
- if(adapter->hw.media_type != e1000_media_type_copper)
+ if (adapter->hw.media_type != e1000_media_type_copper)
return -EOPNOTSUPP;
switch (cmd) {
@@ -4150,10 +4247,10 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
data->phy_id = adapter->hw.phy_addr;
break;
case SIOCGMIIREG:
- if(!capable(CAP_NET_ADMIN))
+ if (!capable(CAP_NET_ADMIN))
return -EPERM;
spin_lock_irqsave(&adapter->stats_lock, flags);
- if(e1000_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+ if (e1000_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
&data->val_out)) {
spin_unlock_irqrestore(&adapter->stats_lock, flags);
return -EIO;
@@ -4161,23 +4258,23 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
spin_unlock_irqrestore(&adapter->stats_lock, flags);
break;
case SIOCSMIIREG:
- if(!capable(CAP_NET_ADMIN))
+ if (!capable(CAP_NET_ADMIN))
return -EPERM;
- if(data->reg_num & ~(0x1F))
+ if (data->reg_num & ~(0x1F))
return -EFAULT;
mii_reg = data->val_in;
spin_lock_irqsave(&adapter->stats_lock, flags);
- if(e1000_write_phy_reg(&adapter->hw, data->reg_num,
+ if (e1000_write_phy_reg(&adapter->hw, data->reg_num,
mii_reg)) {
spin_unlock_irqrestore(&adapter->stats_lock, flags);
return -EIO;
}
- if(adapter->hw.phy_type == e1000_phy_m88) {
+ if (adapter->hw.phy_type == e1000_phy_m88) {
switch (data->reg_num) {
case PHY_CTRL:
- if(mii_reg & MII_CR_POWER_DOWN)
+ if (mii_reg & MII_CR_POWER_DOWN)
break;
- if(mii_reg & MII_CR_AUTO_NEG_EN) {
+ if (mii_reg & MII_CR_AUTO_NEG_EN) {
adapter->hw.autoneg = 1;
adapter->hw.autoneg_advertised = 0x2F;
} else {
@@ -4192,14 +4289,14 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
HALF_DUPLEX;
retval = e1000_set_spd_dplx(adapter,
spddplx);
- if(retval) {
+ if (retval) {
spin_unlock_irqrestore(
- &adapter->stats_lock,
+ &adapter->stats_lock,
flags);
return retval;
}
}
- if(netif_running(adapter->netdev)) {
+ if (netif_running(adapter->netdev)) {
e1000_down(adapter);
e1000_up(adapter);
} else
@@ -4207,7 +4304,7 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
break;
case M88E1000_PHY_SPEC_CTRL:
case M88E1000_EXT_PHY_SPEC_CTRL:
- if(e1000_phy_reset(&adapter->hw)) {
+ if (e1000_phy_reset(&adapter->hw)) {
spin_unlock_irqrestore(
&adapter->stats_lock, flags);
return -EIO;
@@ -4217,9 +4314,9 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
} else {
switch (data->reg_num) {
case PHY_CTRL:
- if(mii_reg & MII_CR_POWER_DOWN)
+ if (mii_reg & MII_CR_POWER_DOWN)
break;
- if(netif_running(adapter->netdev)) {
+ if (netif_running(adapter->netdev)) {
e1000_down(adapter);
e1000_up(adapter);
} else
@@ -4241,7 +4338,7 @@ e1000_pci_set_mwi(struct e1000_hw *hw)
struct e1000_adapter *adapter = hw->back;
int ret_val = pci_set_mwi(adapter->pdev);
- if(ret_val)
+ if (ret_val)
DPRINTK(PROBE, ERR, "Error in setting MWI\n");
}
@@ -4290,7 +4387,7 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
e1000_irq_disable(adapter);
adapter->vlgrp = grp;
- if(grp) {
+ if (grp) {
/* enable VLAN tag insert/strip */
ctrl = E1000_READ_REG(&adapter->hw, CTRL);
ctrl |= E1000_CTRL_VME;
@@ -4312,7 +4409,7 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
rctl = E1000_READ_REG(&adapter->hw, RCTL);
rctl &= ~E1000_RCTL_VFE;
E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
- if(adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) {
+ if (adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) {
e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
}
@@ -4326,9 +4423,10 @@ e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
uint32_t vfta, index;
- if((adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
- (vid == adapter->mng_vlan_id))
+
+ if ((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ (vid == adapter->mng_vlan_id))
return;
/* add VID to filter table */
index = (vid >> 5) & 0x7F;
@@ -4345,13 +4443,13 @@ e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid)
e1000_irq_disable(adapter);
- if(adapter->vlgrp)
+ if (adapter->vlgrp)
adapter->vlgrp->vlan_devices[vid] = NULL;
e1000_irq_enable(adapter);
- if((adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ if ((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
(vid == adapter->mng_vlan_id)) {
/* release control to f/w */
e1000_release_hw_control(adapter);
@@ -4370,10 +4468,10 @@ e1000_restore_vlan(struct e1000_adapter *adapter)
{
e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
- if(adapter->vlgrp) {
+ if (adapter->vlgrp) {
uint16_t vid;
- for(vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
- if(!adapter->vlgrp->vlan_devices[vid])
+ for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
+ if (!adapter->vlgrp->vlan_devices[vid])
continue;
e1000_vlan_rx_add_vid(adapter->netdev, vid);
}
@@ -4386,13 +4484,13 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx)
adapter->hw.autoneg = 0;
/* Fiber NICs only allow 1000 gbps Full duplex */
- if((adapter->hw.media_type == e1000_media_type_fiber) &&
+ if ((adapter->hw.media_type == e1000_media_type_fiber) &&
spddplx != (SPEED_1000 + DUPLEX_FULL)) {
DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
return -EINVAL;
}
- switch(spddplx) {
+ switch (spddplx) {
case SPEED_10 + DUPLEX_HALF:
adapter->hw.forced_speed_duplex = e1000_10_half;
break;
@@ -4418,6 +4516,54 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx)
}
#ifdef CONFIG_PM
+/* these functions save and restore 16 or 64 dwords (64-256 bytes) of config
+ * space versus the 64 bytes that pci_[save|restore]_state handle
+ */
+#define PCIE_CONFIG_SPACE_LEN 256
+#define PCI_CONFIG_SPACE_LEN 64
+static int
+e1000_pci_save_state(struct e1000_adapter *adapter)
+{
+ struct pci_dev *dev = adapter->pdev;
+ int size;
+ int i;
+ if (adapter->hw.mac_type >= e1000_82571)
+ size = PCIE_CONFIG_SPACE_LEN;
+ else
+ size = PCI_CONFIG_SPACE_LEN;
+
+ WARN_ON(adapter->config_space != NULL);
+
+ adapter->config_space = kmalloc(size, GFP_KERNEL);
+ if (!adapter->config_space) {
+ DPRINTK(PROBE, ERR, "unable to allocate %d bytes\n", size);
+ return -ENOMEM;
+ }
+ for (i = 0; i < (size / 4); i++)
+ pci_read_config_dword(dev, i * 4, &adapter->config_space[i]);
+ return 0;
+}
+
+static void
+e1000_pci_restore_state(struct e1000_adapter *adapter)
+{
+ struct pci_dev *dev = adapter->pdev;
+ int size;
+ int i;
+ if (adapter->config_space == NULL)
+ return;
+ if (adapter->hw.mac_type >= e1000_82571)
+ size = PCIE_CONFIG_SPACE_LEN;
+ else
+ size = PCI_CONFIG_SPACE_LEN;
+ for (i = 0; i < (size / 4); i++)
+ pci_write_config_dword(dev, i * 4, adapter->config_space[i]);
+ kfree(adapter->config_space);
+ adapter->config_space = NULL;
+ return;
+}
+#endif /* CONFIG_PM */
+
static int
e1000_suspend(struct pci_dev *pdev, pm_message_t state)
{
@@ -4429,25 +4575,33 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
netif_device_detach(netdev);
- if(netif_running(netdev))
+ if (netif_running(netdev))
e1000_down(adapter);
+#ifdef CONFIG_PM
+ /* implement our own version of pci_save_state(pdev) because pci
+ * express adapters have larger 256 byte config spaces */
+ retval = e1000_pci_save_state(adapter);
+ if (retval)
+ return retval;
+#endif
+
status = E1000_READ_REG(&adapter->hw, STATUS);
- if(status & E1000_STATUS_LU)
+ if (status & E1000_STATUS_LU)
wufc &= ~E1000_WUFC_LNKC;
- if(wufc) {
+ if (wufc) {
e1000_setup_rctl(adapter);
e1000_set_multi(netdev);
/* turn on all-multi mode if wake on multicast is enabled */
- if(adapter->wol & E1000_WUFC_MC) {
+ if (adapter->wol & E1000_WUFC_MC) {
rctl = E1000_READ_REG(&adapter->hw, RCTL);
rctl |= E1000_RCTL_MPE;
E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
}
- if(adapter->hw.mac_type >= e1000_82540) {
+ if (adapter->hw.mac_type >= e1000_82540) {
ctrl = E1000_READ_REG(&adapter->hw, CTRL);
/* advertise wake from D3Cold */
#define E1000_CTRL_ADVD3WUC 0x00100000
@@ -4458,7 +4612,7 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
}
- if(adapter->hw.media_type == e1000_media_type_fiber ||
+ if (adapter->hw.media_type == e1000_media_type_fiber ||
adapter->hw.media_type == e1000_media_type_internal_serdes) {
/* keep the laser running in D3 */
ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
@@ -4488,12 +4642,10 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
DPRINTK(PROBE, ERR, "Error enabling D3 cold wake\n");
}
- pci_save_state(pdev);
-
- if(adapter->hw.mac_type >= e1000_82540 &&
+ if (adapter->hw.mac_type >= e1000_82540 &&
adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
- if(manc & E1000_MANC_SMBUS_EN) {
+ if (manc & E1000_MANC_SMBUS_EN) {
manc |= E1000_MANC_ARP_EN;
E1000_WRITE_REG(&adapter->hw, MANC, manc);
retval = pci_enable_wake(pdev, PCI_D3hot, 1);
@@ -4518,6 +4670,7 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
return 0;
}
+#ifdef CONFIG_PM
static int
e1000_resume(struct pci_dev *pdev)
{
@@ -4529,6 +4682,7 @@ e1000_resume(struct pci_dev *pdev)
retval = pci_set_power_state(pdev, PCI_D0);
if (retval)
DPRINTK(PROBE, ERR, "Error in setting power state\n");
+ e1000_pci_restore_state(adapter);
ret_val = pci_enable_device(pdev);
pci_set_master(pdev);
@@ -4542,12 +4696,12 @@ e1000_resume(struct pci_dev *pdev)
e1000_reset(adapter);
E1000_WRITE_REG(&adapter->hw, WUS, ~0);
- if(netif_running(netdev))
+ if (netif_running(netdev))
e1000_up(adapter);
netif_device_attach(netdev);
- if(adapter->hw.mac_type >= e1000_82540 &&
+ if (adapter->hw.mac_type >= e1000_82540 &&
adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
manc &= ~(E1000_MANC_ARP_EN);
diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h
index aac64de61437..9790db974dc1 100644
--- a/drivers/net/e1000/e1000_osdep.h
+++ b/drivers/net/e1000/e1000_osdep.h
@@ -47,7 +47,7 @@
BUG(); \
} else { \
msleep(x); \
- } } while(0)
+ } } while (0)
/* Some workarounds require millisecond delays and are run during interrupt
* context. Most notably, when establishing link, the phy may need tweaking
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index 0a7918c62557..3768d83cd577 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -227,7 +227,7 @@ static int __devinit
e1000_validate_option(int *value, struct e1000_option *opt,
struct e1000_adapter *adapter)
{
- if(*value == OPTION_UNSET) {
+ if (*value == OPTION_UNSET) {
*value = opt->def;
return 0;
}
@@ -244,7 +244,7 @@ e1000_validate_option(int *value, struct e1000_option *opt,
}
break;
case range_option:
- if(*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+ if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
DPRINTK(PROBE, INFO,
"%s set to %i\n", opt->name, *value);
return 0;
@@ -254,10 +254,10 @@ e1000_validate_option(int *value, struct e1000_option *opt,
int i;
struct e1000_opt_list *ent;
- for(i = 0; i < opt->arg.l.nr; i++) {
+ for (i = 0; i < opt->arg.l.nr; i++) {
ent = &opt->arg.l.p[i];
- if(*value == ent->i) {
- if(ent->str[0] != '\0')
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
DPRINTK(PROBE, INFO, "%s\n", ent->str);
return 0;
}
@@ -291,7 +291,7 @@ void __devinit
e1000_check_options(struct e1000_adapter *adapter)
{
int bd = adapter->bd_number;
- if(bd >= E1000_MAX_NIC) {
+ if (bd >= E1000_MAX_NIC) {
DPRINTK(PROBE, NOTICE,
"Warning: no configuration for board #%i\n", bd);
DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
@@ -315,7 +315,7 @@ e1000_check_options(struct e1000_adapter *adapter)
if (num_TxDescriptors > bd) {
tx_ring->count = TxDescriptors[bd];
e1000_validate_option(&tx_ring->count, &opt, adapter);
- E1000_ROUNDUP(tx_ring->count,
+ E1000_ROUNDUP(tx_ring->count,
REQ_TX_DESCRIPTOR_MULTIPLE);
} else {
tx_ring->count = opt.def;
@@ -341,7 +341,7 @@ e1000_check_options(struct e1000_adapter *adapter)
if (num_RxDescriptors > bd) {
rx_ring->count = RxDescriptors[bd];
e1000_validate_option(&rx_ring->count, &opt, adapter);
- E1000_ROUNDUP(rx_ring->count,
+ E1000_ROUNDUP(rx_ring->count,
REQ_RX_DESCRIPTOR_MULTIPLE);
} else {
rx_ring->count = opt.def;
@@ -403,7 +403,7 @@ e1000_check_options(struct e1000_adapter *adapter)
if (num_TxIntDelay > bd) {
adapter->tx_int_delay = TxIntDelay[bd];
- e1000_validate_option(&adapter->tx_int_delay, &opt,
+ e1000_validate_option(&adapter->tx_int_delay, &opt,
adapter);
} else {
adapter->tx_int_delay = opt.def;
@@ -421,7 +421,7 @@ e1000_check_options(struct e1000_adapter *adapter)
if (num_TxAbsIntDelay > bd) {
adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
- e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
+ e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
adapter);
} else {
adapter->tx_abs_int_delay = opt.def;
@@ -439,7 +439,7 @@ e1000_check_options(struct e1000_adapter *adapter)
if (num_RxIntDelay > bd) {
adapter->rx_int_delay = RxIntDelay[bd];
- e1000_validate_option(&adapter->rx_int_delay, &opt,
+ e1000_validate_option(&adapter->rx_int_delay, &opt,
adapter);
} else {
adapter->rx_int_delay = opt.def;
@@ -457,7 +457,7 @@ e1000_check_options(struct e1000_adapter *adapter)
if (num_RxAbsIntDelay > bd) {
adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
- e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
+ e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
adapter);
} else {
adapter->rx_abs_int_delay = opt.def;
@@ -475,17 +475,17 @@ e1000_check_options(struct e1000_adapter *adapter)
if (num_InterruptThrottleRate > bd) {
adapter->itr = InterruptThrottleRate[bd];
- switch(adapter->itr) {
+ switch (adapter->itr) {
case 0:
- DPRINTK(PROBE, INFO, "%s turned off\n",
+ DPRINTK(PROBE, INFO, "%s turned off\n",
opt.name);
break;
case 1:
- DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
+ DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
opt.name);
break;
default:
- e1000_validate_option(&adapter->itr, &opt,
+ e1000_validate_option(&adapter->itr, &opt,
adapter);
break;
}
@@ -494,7 +494,7 @@ e1000_check_options(struct e1000_adapter *adapter)
}
}
- switch(adapter->hw.media_type) {
+ switch (adapter->hw.media_type) {
case e1000_media_type_fiber:
case e1000_media_type_internal_serdes:
e1000_check_fiber_options(adapter);
@@ -518,17 +518,17 @@ static void __devinit
e1000_check_fiber_options(struct e1000_adapter *adapter)
{
int bd = adapter->bd_number;
- if(num_Speed > bd) {
+ if (num_Speed > bd) {
DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
"parameter ignored\n");
}
- if(num_Duplex > bd) {
+ if (num_Duplex > bd) {
DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
"parameter ignored\n");
}
- if((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
+ if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is "
"not valid for fiber adapters, "
"parameter ignored\n");
@@ -598,7 +598,7 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
}
}
- if((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
+ if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
DPRINTK(PROBE, INFO,
"AutoNeg specified along with Speed or Duplex, "
"parameter ignored\n");
@@ -659,7 +659,7 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
switch (speed + dplx) {
case 0:
adapter->hw.autoneg = adapter->fc_autoneg = 1;
- if((num_Speed > bd) && (speed != 0 || dplx != 0))
+ if ((num_Speed > bd) && (speed != 0 || dplx != 0))
DPRINTK(PROBE, INFO,
"Speed and duplex autonegotiation enabled\n");
break;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index eb86b059809b..f2d1dafde087 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -69,8 +69,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.47"
-#define DRV_MODULE_RELDATE "Dec 28, 2005"
+#define DRV_MODULE_VERSION "3.48"
+#define DRV_MODULE_RELDATE "Jan 16, 2006"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -1325,10 +1325,12 @@ static int tg3_set_power_state(struct tg3 *tp, int state)
val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
tw32(0x7d00, val);
if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
- tg3_nvram_lock(tp);
+ int err;
+
+ err = tg3_nvram_lock(tp);
tg3_halt_cpu(tp, RX_CPU_BASE);
- tw32_f(NVRAM_SWARB, SWARB_REQ_CLR0);
- tg3_nvram_unlock(tp);
+ if (!err)
+ tg3_nvram_unlock(tp);
}
}
@@ -4193,14 +4195,19 @@ static int tg3_nvram_lock(struct tg3 *tp)
if (tp->tg3_flags & TG3_FLAG_NVRAM) {
int i;
- tw32(NVRAM_SWARB, SWARB_REQ_SET1);
- for (i = 0; i < 8000; i++) {
- if (tr32(NVRAM_SWARB) & SWARB_GNT1)
- break;
- udelay(20);
+ if (tp->nvram_lock_cnt == 0) {
+ tw32(NVRAM_SWARB, SWARB_REQ_SET1);
+ for (i = 0; i < 8000; i++) {
+ if (tr32(NVRAM_SWARB) & SWARB_GNT1)
+ break;
+ udelay(20);
+ }
+ if (i == 8000) {
+ tw32(NVRAM_SWARB, SWARB_REQ_CLR1);
+ return -ENODEV;
+ }
}
- if (i == 8000)
- return -ENODEV;
+ tp->nvram_lock_cnt++;
}
return 0;
}
@@ -4208,8 +4215,12 @@ static int tg3_nvram_lock(struct tg3 *tp)
/* tp->lock is held. */
static void tg3_nvram_unlock(struct tg3 *tp)
{
- if (tp->tg3_flags & TG3_FLAG_NVRAM)
- tw32_f(NVRAM_SWARB, SWARB_REQ_CLR1);
+ if (tp->tg3_flags & TG3_FLAG_NVRAM) {
+ if (tp->nvram_lock_cnt > 0)
+ tp->nvram_lock_cnt--;
+ if (tp->nvram_lock_cnt == 0)
+ tw32_f(NVRAM_SWARB, SWARB_REQ_CLR1);
+ }
}
/* tp->lock is held. */
@@ -4320,8 +4331,13 @@ static int tg3_chip_reset(struct tg3 *tp)
void (*write_op)(struct tg3 *, u32, u32);
int i;
- if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X))
+ if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X)) {
tg3_nvram_lock(tp);
+ /* No matching tg3_nvram_unlock() after this because
+ * chip reset below will undo the nvram lock.
+ */
+ tp->nvram_lock_cnt = 0;
+ }
/*
* We must avoid the readl() that normally takes place.
@@ -4717,6 +4733,10 @@ static int tg3_halt_cpu(struct tg3 *tp, u32 offset)
(offset == RX_CPU_BASE ? "RX" : "TX"));
return -ENODEV;
}
+
+ /* Clear firmware's nvram arbitration. */
+ if (tp->tg3_flags & TG3_FLAG_NVRAM)
+ tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
return 0;
}
@@ -4736,7 +4756,7 @@ struct fw_info {
static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_base,
int cpu_scratch_size, struct fw_info *info)
{
- int err, i;
+ int err, lock_err, i;
void (*write_op)(struct tg3 *, u32, u32);
if (cpu_base == TX_CPU_BASE &&
@@ -4755,9 +4775,10 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b
/* It is possible that bootcode is still loading at this point.
* Get the nvram lock first before halting the cpu.
*/
- tg3_nvram_lock(tp);
+ lock_err = tg3_nvram_lock(tp);
err = tg3_halt_cpu(tp, cpu_base);
- tg3_nvram_unlock(tp);
+ if (!lock_err)
+ tg3_nvram_unlock(tp);
if (err)
goto out;
@@ -8182,7 +8203,7 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
data[1] = 1;
}
if (etest->flags & ETH_TEST_FL_OFFLINE) {
- int irq_sync = 0;
+ int err, irq_sync = 0;
if (netif_running(dev)) {
tg3_netif_stop(tp);
@@ -8192,11 +8213,12 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
tg3_full_lock(tp, irq_sync);
tg3_halt(tp, RESET_KIND_SUSPEND, 1);
- tg3_nvram_lock(tp);
+ err = tg3_nvram_lock(tp);
tg3_halt_cpu(tp, RX_CPU_BASE);
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
tg3_halt_cpu(tp, TX_CPU_BASE);
- tg3_nvram_unlock(tp);
+ if (!err)
+ tg3_nvram_unlock(tp);
if (tg3_test_registers(tp) != 0) {
etest->flags |= ETH_TEST_FL_FAILED;
@@ -8588,7 +8610,11 @@ static void __devinit tg3_nvram_init(struct tg3 *tp)
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) {
tp->tg3_flags |= TG3_FLAG_NVRAM;
- tg3_nvram_lock(tp);
+ if (tg3_nvram_lock(tp)) {
+ printk(KERN_WARNING PFX "%s: Cannot get nvarm lock, "
+ "tg3_nvram_init failed.\n", tp->dev->name);
+ return;
+ }
tg3_enable_nvram_access(tp);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)
@@ -8686,7 +8712,9 @@ static int tg3_nvram_read(struct tg3 *tp, u32 offset, u32 *val)
if (offset > NVRAM_ADDR_MSK)
return -EINVAL;
- tg3_nvram_lock(tp);
+ ret = tg3_nvram_lock(tp);
+ if (ret)
+ return ret;
tg3_enable_nvram_access(tp);
@@ -8785,10 +8813,6 @@ static int tg3_nvram_write_block_unbuffered(struct tg3 *tp, u32 offset, u32 len,
offset = offset + (pagesize - page_off);
- /* Nvram lock released by tg3_nvram_read() above,
- * so need to get it again.
- */
- tg3_nvram_lock(tp);
tg3_enable_nvram_access(tp);
/*
@@ -8925,7 +8949,9 @@ static int tg3_nvram_write_block(struct tg3 *tp, u32 offset, u32 len, u8 *buf)
else {
u32 grc_mode;
- tg3_nvram_lock(tp);
+ ret = tg3_nvram_lock(tp);
+ if (ret)
+ return ret;
tg3_enable_nvram_access(tp);
if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 890e1635996b..e8243305f0e8 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2275,6 +2275,7 @@ struct tg3 {
dma_addr_t stats_mapping;
struct work_struct reset_task;
+ int nvram_lock_cnt;
u32 nvram_size;
u32 nvram_pagesize;
u32 nvram_jedecnum;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 605f0df0bfba..dda6099903c1 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1142,6 +1142,9 @@ static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev)
case 0x27c4:
ich = 7;
break;
+ case 0x2828: /* ICH8M */
+ ich = 8;
+ break;
default:
/* we do not handle this PCI device */
return;
@@ -1161,7 +1164,7 @@ static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev)
else
return; /* not in combined mode */
} else {
- WARN_ON((ich != 6) && (ich != 7));
+ WARN_ON((ich != 6) && (ich != 7) && (ich != 8));
tmp &= 0x3; /* interesting bits 1:0 */
if (tmp & (1 << 0))
comb = (1 << 2); /* PATA port 0, SATA port 1 */
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index d113290b5fc0..19bd346951dd 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -276,6 +276,16 @@ static const struct pci_device_id ahci_pci_tbl[] = {
board_ahci }, /* ESB2 */
{ PCI_VENDOR_ID_INTEL, 0x27c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_ahci }, /* ICH7-M DH */
+ { PCI_VENDOR_ID_INTEL, 0x2821, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH8 */
+ { PCI_VENDOR_ID_INTEL, 0x2822, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH8 */
+ { PCI_VENDOR_ID_INTEL, 0x2824, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH8 */
+ { PCI_VENDOR_ID_INTEL, 0x2829, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH8M */
+ { PCI_VENDOR_ID_INTEL, 0x282a, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH8M */
{ } /* terminate list */
};
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 557788ec4eec..fc3ca051ceed 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -157,6 +157,9 @@ static const struct pci_device_id piix_pci_tbl[] = {
{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
{ } /* terminate list */
};
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 99bae8369ab2..46c4cdbaee86 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -611,6 +611,10 @@ int ata_rwcmd_protocol(struct ata_queued_cmd *qc)
if (dev->flags & ATA_DFLAG_PIO) {
tf->protocol = ATA_PROT_PIO;
index = dev->multi_count ? 0 : 8;
+ } else if (lba48 && (qc->ap->flags & ATA_FLAG_PIO_LBA48)) {
+ /* Unable to use DMA due to host limitation */
+ tf->protocol = ATA_PROT_PIO;
+ index = dev->multi_count ? 0 : 4;
} else {
tf->protocol = ATA_PROT_DMA;
index = 16;
@@ -1051,18 +1055,22 @@ static unsigned int ata_pio_modes(const struct ata_device *adev)
{
u16 modes;
- /* Usual case. Word 53 indicates word 88 is valid */
- if (adev->id[ATA_ID_FIELD_VALID] & (1 << 2)) {
+ /* Usual case. Word 53 indicates word 64 is valid */
+ if (adev->id[ATA_ID_FIELD_VALID] & (1 << 1)) {
modes = adev->id[ATA_ID_PIO_MODES] & 0x03;
modes <<= 3;
modes |= 0x7;
return modes;
}
- /* If word 88 isn't valid then Word 51 holds the PIO timing number
- for the maximum. Turn it into a mask and return it */
- modes = (2 << (adev->id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ;
+ /* If word 64 isn't valid then Word 51 high byte holds the PIO timing
+ number for the maximum. Turn it into a mask and return it */
+ modes = (2 << ((adev->id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF)) - 1 ;
return modes;
+ /* But wait.. there's more. Design your standards by committee and
+ you too can get a free iordy field to process. However its the
+ speeds not the modes that are supported... Note drivers using the
+ timing API will get this right anyway */
}
struct ata_exec_internal_arg {
@@ -1164,6 +1172,39 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
return AC_ERR_OTHER;
}
+/**
+ * ata_pio_need_iordy - check if iordy needed
+ * @adev: ATA device
+ *
+ * Check if the current speed of the device requires IORDY. Used
+ * by various controllers for chip configuration.
+ */
+
+unsigned int ata_pio_need_iordy(const struct ata_device *adev)
+{
+ int pio;
+ int speed = adev->pio_mode - XFER_PIO_0;
+
+ if (speed < 2)
+ return 0;
+ if (speed > 2)
+ return 1;
+
+ /* If we have no drive specific rule, then PIO 2 is non IORDY */
+
+ if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */
+ pio = adev->id[ATA_ID_EIDE_PIO];
+ /* Is the speed faster than the drive allows non IORDY ? */
+ if (pio) {
+ /* This is cycle times not frequency - watch the logic! */
+ if (pio > 240) /* PIO2 is 240nS per cycle */
+ return 1;
+ return 0;
+ }
+ }
+ return 0;
+}
+
/**
* ata_dev_identify - obtain IDENTIFY x DEVICE page
* @ap: port on which device we wish to probe resides
@@ -1415,7 +1456,7 @@ void ata_dev_config(struct ata_port *ap, unsigned int i)
ap->udma_mask &= ATA_UDMA5;
ap->host->max_sectors = ATA_MAX_SECTORS;
ap->host->hostt->max_sectors = ATA_MAX_SECTORS;
- ap->device->flags |= ATA_DFLAG_LOCK_SECTORS;
+ ap->device[i].flags |= ATA_DFLAG_LOCK_SECTORS;
}
if (ap->ops->dev_config)
@@ -3056,10 +3097,21 @@ static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
static void ata_data_xfer(struct ata_port *ap, unsigned char *buf,
unsigned int buflen, int do_write)
{
- if (ap->flags & ATA_FLAG_MMIO)
- ata_mmio_data_xfer(ap, buf, buflen, do_write);
- else
- ata_pio_data_xfer(ap, buf, buflen, do_write);
+ /* Make the crap hardware pay the costs not the good stuff */
+ if (unlikely(ap->flags & ATA_FLAG_IRQ_MASK)) {
+ unsigned long flags;
+ local_irq_save(flags);
+ if (ap->flags & ATA_FLAG_MMIO)
+ ata_mmio_data_xfer(ap, buf, buflen, do_write);
+ else
+ ata_pio_data_xfer(ap, buf, buflen, do_write);
+ local_irq_restore(flags);
+ } else {
+ if (ap->flags & ATA_FLAG_MMIO)
+ ata_mmio_data_xfer(ap, buf, buflen, do_write);
+ else
+ ata_pio_data_xfer(ap, buf, buflen, do_write);
+ }
}
/**
@@ -5122,6 +5174,7 @@ EXPORT_SYMBOL_GPL(ata_dev_id_string);
EXPORT_SYMBOL_GPL(ata_dev_config);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
+EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
EXPORT_SYMBOL_GPL(ata_timing_compute);
EXPORT_SYMBOL_GPL(ata_timing_merge);
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 3d1ea09a06a1..b0b0a69b3563 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -66,6 +66,7 @@ enum {
board_2037x = 0, /* FastTrak S150 TX2plus */
board_20319 = 1, /* FastTrak S150 TX4 */
board_20619 = 2, /* FastTrak TX4000 */
+ board_20771 = 3, /* FastTrak TX2300 */
PDC_HAS_PATA = (1 << 1), /* PDC20375 has PATA */
@@ -190,6 +191,16 @@ static const struct ata_port_info pdc_port_info[] = {
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &pdc_pata_ops,
},
+
+ /* board_20771 */
+ {
+ .sht = &pdc_ata_sht,
+ .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .port_ops = &pdc_sata_ops,
+ },
};
static const struct pci_device_id pdc_ata_pci_tbl[] = {
@@ -226,6 +237,8 @@ static const struct pci_device_id pdc_ata_pci_tbl[] = {
{ PCI_VENDOR_ID_PROMISE, 0x6629, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20619 },
+ { PCI_VENDOR_ID_PROMISE, 0x3570, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_20771 },
{ } /* terminate list */
};
@@ -706,6 +719,9 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
case board_2037x:
probe_ent->n_ports = 2;
break;
+ case board_20771:
+ probe_ent->n_ports = 2;
+ break;
case board_20619:
probe_ent->n_ports = 4;
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index 668373590aa4..d8472563fde8 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -470,6 +470,7 @@ static const struct pci_device_id k2_sata_pci_tbl[] = {
{ 0x1166, 0x0241, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
{ 0x1166, 0x0242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
{ 0x1166, 0x024a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
+ { 0x1166, 0x024b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
{ }
};
diff --git a/drivers/video/sbuslib.c b/drivers/video/sbuslib.c
index 55e6e2d60d3a..a4d7cc51ce0b 100644
--- a/drivers/video/sbuslib.c
+++ b/drivers/video/sbuslib.c
@@ -199,8 +199,7 @@ struct fbcmap32 {
#define FBIOPUTCMAP32 _IOW('F', 3, struct fbcmap32)
#define FBIOGETCMAP32 _IOW('F', 4, struct fbcmap32)
-static int fbiogetputcmap(struct file *file, struct fb_info *info,
- unsigned int cmd, unsigned long arg)
+static int fbiogetputcmap(struct fb_info *info, unsigned int cmd, unsigned long arg)
{
struct fbcmap32 __user *argp = (void __user *)arg;
struct fbcmap __user *p = compat_alloc_user_space(sizeof(*p));
@@ -236,8 +235,7 @@ struct fbcursor32 {
#define FBIOSCURSOR32 _IOW('F', 24, struct fbcursor32)
#define FBIOGCURSOR32 _IOW('F', 25, struct fbcursor32)
-static int fbiogscursor(struct file *file, struct fb_info *info,
- unsigned long arg)
+static int fbiogscursor(struct fb_info *info, unsigned long arg)
{
struct fbcursor __user *p = compat_alloc_user_space(sizeof(*p));
struct fbcursor32 __user *argp = (void __user *)arg;
@@ -263,8 +261,7 @@ static int fbiogscursor(struct file *file, struct fb_info *info,
return info->fbops->fb_ioctl(info, FBIOSCURSOR, (unsigned long)p);
}
-long sbusfb_compat_ioctl(struct fb_info *info, unsigned int cmd,
- unsigned long arg)
+int sbusfb_compat_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
{
switch (cmd) {
case FBIOGTYPE:
diff --git a/drivers/video/sbuslib.h b/drivers/video/sbuslib.h
index f753939013ed..492828c3fe8f 100644
--- a/drivers/video/sbuslib.h
+++ b/drivers/video/sbuslib.h
@@ -20,7 +20,7 @@ extern int sbusfb_mmap_helper(struct sbus_mmap_map *map,
int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg,
struct fb_info *info,
int type, int fb_depth, unsigned long fb_size);
-long sbusfb_compat_ioctl(struct fb_info *info, unsigned int cmd,
+int sbusfb_compat_ioctl(struct fb_info *info, unsigned int cmd,
unsigned long arg);
#endif /* _SBUSLIB_H */
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index d1db8c17a74e..120626789406 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -336,24 +336,47 @@ static inline int bio_add_buffer(struct bio *bio, struct buffer_head *bh)
}
/*
- * Submit all of the bios for all of the ioends we have saved up,
- * covering the initial writepage page and also any probed pages.
+ * Submit all of the bios for all of the ioends we have saved up, covering the
+ * initial writepage page and also any probed pages.
+ *
+ * Because we may have multiple ioends spanning a page, we need to start
+ * writeback on all the buffers before we submit them for I/O. If we mark the
+ * buffers as we got, then we can end up with a page that only has buffers
+ * marked async write and I/O complete on can occur before we mark the other
+ * buffers async write.
+ *
+ * The end result of this is that we trip a bug in end_page_writeback() because
+ * we call it twice for the one page as the code in end_buffer_async_write()
+ * assumes that all buffers on the page are started at the same time.
+ *
+ * The fix is two passes across the ioend list - one to start writeback on the
+ * bufferheads, and then the second one submit them for I/O.
*/
STATIC void
xfs_submit_ioend(
xfs_ioend_t *ioend)
{
+ xfs_ioend_t *head = ioend;
xfs_ioend_t *next;
struct buffer_head *bh;
struct bio *bio;
sector_t lastblock = 0;
+ /* Pass 1 - start writeback */
+ do {
+ next = ioend->io_list;
+ for (bh = ioend->io_buffer_head; bh; bh = bh->b_private) {
+ xfs_start_buffer_writeback(bh);
+ }
+ } while ((ioend = next) != NULL);
+
+ /* Pass 2 - submit I/O */
+ ioend = head;
do {
next = ioend->io_list;
bio = NULL;
for (bh = ioend->io_buffer_head; bh; bh = bh->b_private) {
- xfs_start_buffer_writeback(bh);
if (!bio) {
retry:
diff --git a/include/asm-powerpc/lppaca.h b/include/asm-powerpc/lppaca.h
index cd9f11f1ef14..4dc514aabfe7 100644
--- a/include/asm-powerpc/lppaca.h
+++ b/include/asm-powerpc/lppaca.h
@@ -31,7 +31,7 @@
/* The Hypervisor barfs if the lppaca crosses a page boundary. A 1k
* alignment is sufficient to prevent this */
-struct __attribute__((__aligned__(0x400))) lppaca {
+struct lppaca {
//=============================================================================
// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data
// NOTE: The xDynXyz fields are fields that will be dynamically changed by
@@ -129,7 +129,7 @@ struct __attribute__((__aligned__(0x400))) lppaca {
// CACHE_LINE_4-5 0x0100 - 0x01FF Contains PMC interrupt data
//=============================================================================
u8 pmc_save_area[256]; // PMC interrupt Area x00-xFF
-};
+} __attribute__((__aligned__(0x400)));
extern struct lppaca lppaca[];
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 323924edb26a..a5363324cf95 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -228,6 +228,7 @@ extern void dump_stack(void);
ntohs((addr).s6_addr16[6]), \
ntohs((addr).s6_addr16[7])
#define NIP6_FMT "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x"
+#define NIP6_SEQFMT "%04x%04x%04x%04x%04x%04x%04x%04x"
#if defined(__LITTLE_ENDIAN)
#define HIPQUAD(addr) \
diff --git a/include/linux/libata.h b/include/linux/libata.h
index a43c95f8f968..9e5db2949c58 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -126,16 +126,19 @@ enum {
ATA_FLAG_SUSPENDED = (1 << 12), /* port is suspended */
+ ATA_FLAG_PIO_LBA48 = (1 << 13), /* Host DMA engine is LBA28 only */
+ ATA_FLAG_IRQ_MASK = (1 << 14), /* Mask IRQ in PIO xfers */
+
ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
ATA_QCFLAG_SINGLE = (1 << 4), /* no s/g, just a single buffer */
ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE,
/* various lengths of time */
- ATA_TMOUT_EDD = 5 * HZ, /* hueristic */
+ ATA_TMOUT_EDD = 5 * HZ, /* heuristic */
ATA_TMOUT_PIO = 30 * HZ,
- ATA_TMOUT_BOOT = 30 * HZ, /* hueristic */
- ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* hueristic */
+ ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */
+ ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* heuristic */
ATA_TMOUT_CDB = 30 * HZ,
ATA_TMOUT_CDB_QUICK = 5 * HZ,
ATA_TMOUT_INTERNAL = 30 * HZ,
@@ -499,6 +502,8 @@ extern int ata_scsi_slave_config(struct scsi_device *sdev);
/*
* Timing helpers
*/
+
+extern unsigned int ata_pio_need_iordy(const struct ata_device *);
extern int ata_timing_compute(struct ata_device *, unsigned short,
struct ata_timing *, int, int);
extern void ata_timing_merge(const struct ata_timing *,
diff --git a/include/linux/netfilter_ipv6/ip6t_ah.h b/include/linux/netfilter_ipv6/ip6t_ah.h
index c4f0793a0a98..8531879eb464 100644
--- a/include/linux/netfilter_ipv6/ip6t_ah.h
+++ b/include/linux/netfilter_ipv6/ip6t_ah.h
@@ -18,13 +18,4 @@ struct ip6t_ah
#define IP6T_AH_INV_LEN 0x02 /* Invert the sense of length. */
#define IP6T_AH_INV_MASK 0x03 /* All possible flags. */
-#define MASK_HOPOPTS 128
-#define MASK_DSTOPTS 64
-#define MASK_ROUTING 32
-#define MASK_FRAGMENT 16
-#define MASK_AH 8
-#define MASK_ESP 4
-#define MASK_NONE 2
-#define MASK_PROTO 1
-
#endif /*_IP6T_AH_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_esp.h b/include/linux/netfilter_ipv6/ip6t_esp.h
index 01142b98a231..a91b6abc8079 100644
--- a/include/linux/netfilter_ipv6/ip6t_esp.h
+++ b/include/linux/netfilter_ipv6/ip6t_esp.h
@@ -7,15 +7,6 @@ struct ip6t_esp
u_int8_t invflags; /* Inverse flags */
};
-#define MASK_HOPOPTS 128
-#define MASK_DSTOPTS 64
-#define MASK_ROUTING 32
-#define MASK_FRAGMENT 16
-#define MASK_AH 8
-#define MASK_ESP 4
-#define MASK_NONE 2
-#define MASK_PROTO 1
-
/* Values for "invflags" field in struct ip6t_esp. */
#define IP6T_ESP_INV_SPI 0x01 /* Invert the sense of spi. */
#define IP6T_ESP_INV_MASK 0x01 /* All possible flags. */
diff --git a/include/linux/netfilter_ipv6/ip6t_frag.h b/include/linux/netfilter_ipv6/ip6t_frag.h
index 449a57eca7dd..66070a0d6dfc 100644
--- a/include/linux/netfilter_ipv6/ip6t_frag.h
+++ b/include/linux/netfilter_ipv6/ip6t_frag.h
@@ -21,13 +21,4 @@ struct ip6t_frag
#define IP6T_FRAG_INV_LEN 0x02 /* Invert the sense of length. */
#define IP6T_FRAG_INV_MASK 0x03 /* All possible flags. */
-#define MASK_HOPOPTS 128
-#define MASK_DSTOPTS 64
-#define MASK_ROUTING 32
-#define MASK_FRAGMENT 16
-#define MASK_AH 8
-#define MASK_ESP 4
-#define MASK_NONE 2
-#define MASK_PROTO 1
-
#endif /*_IP6T_FRAG_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_opts.h b/include/linux/netfilter_ipv6/ip6t_opts.h
index e259b6275bd2..a07e36380ae8 100644
--- a/include/linux/netfilter_ipv6/ip6t_opts.h
+++ b/include/linux/netfilter_ipv6/ip6t_opts.h
@@ -20,13 +20,4 @@ struct ip6t_opts
#define IP6T_OPTS_INV_LEN 0x01 /* Invert the sense of length. */
#define IP6T_OPTS_INV_MASK 0x01 /* All possible flags. */
-#define MASK_HOPOPTS 128
-#define MASK_DSTOPTS 64
-#define MASK_ROUTING 32
-#define MASK_FRAGMENT 16
-#define MASK_AH 8
-#define MASK_ESP 4
-#define MASK_NONE 2
-#define MASK_PROTO 1
-
#endif /*_IP6T_OPTS_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_rt.h b/include/linux/netfilter_ipv6/ip6t_rt.h
index f1070fbf2757..52156023e8db 100644
--- a/include/linux/netfilter_ipv6/ip6t_rt.h
+++ b/include/linux/netfilter_ipv6/ip6t_rt.h
@@ -30,13 +30,4 @@ struct ip6t_rt
#define IP6T_RT_INV_LEN 0x04 /* Invert the sense of length. */
#define IP6T_RT_INV_MASK 0x07 /* All possible flags. */
-#define MASK_HOPOPTS 128
-#define MASK_DSTOPTS 64
-#define MASK_ROUTING 32
-#define MASK_FRAGMENT 16
-#define MASK_AH 8
-#define MASK_ESP 4
-#define MASK_NONE 2
-#define MASK_PROTO 1
-
#endif /*_IP6T_RT_H*/
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index e5fd66c5650b..ad7cc22bd424 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -926,7 +926,7 @@ static inline int skb_tailroom(const struct sk_buff *skb)
* Increase the headroom of an empty &sk_buff by reducing the tail
* room. This is only allowed for an empty buffer.
*/
-static inline void skb_reserve(struct sk_buff *skb, unsigned int len)
+static inline void skb_reserve(struct sk_buff *skb, int len)
{
skb->data += len;
skb->tail += len;
diff --git a/net/bridge/netfilter/ebt_ip.c b/net/bridge/netfilter/ebt_ip.c
index f158fe67dd60..dc5d0b2427cf 100644
--- a/net/bridge/netfilter/ebt_ip.c
+++ b/net/bridge/netfilter/ebt_ip.c
@@ -92,7 +92,9 @@ static int ebt_ip_check(const char *tablename, unsigned int hookmask,
if (info->invflags & EBT_IP_PROTO)
return -EINVAL;
if (info->protocol != IPPROTO_TCP &&
- info->protocol != IPPROTO_UDP)
+ info->protocol != IPPROTO_UDP &&
+ info->protocol != IPPROTO_SCTP &&
+ info->protocol != IPPROTO_DCCP)
return -EINVAL;
}
if (info->bitmask & EBT_IP_DPORT && info->dport[0] > info->dport[1])
diff --git a/net/bridge/netfilter/ebt_log.c b/net/bridge/netfilter/ebt_log.c
index a29c1232c420..0128fbbe2328 100644
--- a/net/bridge/netfilter/ebt_log.c
+++ b/net/bridge/netfilter/ebt_log.c
@@ -95,7 +95,9 @@ ebt_log_packet(unsigned int pf, unsigned int hooknum,
"tos=0x%02X, IP proto=%d", NIPQUAD(ih->saddr),
NIPQUAD(ih->daddr), ih->tos, ih->protocol);
if (ih->protocol == IPPROTO_TCP ||
- ih->protocol == IPPROTO_UDP) {
+ ih->protocol == IPPROTO_UDP ||
+ ih->protocol == IPPROTO_SCTP ||
+ ih->protocol == IPPROTO_DCCP) {
struct tcpudphdr _ports, *pptr;
pptr = skb_header_pointer(skb, ih->ihl*4,
diff --git a/net/core/filter.c b/net/core/filter.c
index a52665f75224..9540946a48f3 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -74,7 +74,6 @@ static inline void *load_pointer(struct sk_buff *skb, int k,
* filtering, filter is the array of filter instructions, and
* len is the number of filter blocks in the array.
*/
-
unsigned int sk_run_filter(struct sk_buff *skb, struct sock_filter *filter, int flen)
{
struct sock_filter *fentry; /* We walk down these */
@@ -175,7 +174,7 @@ unsigned int sk_run_filter(struct sk_buff *skb, struct sock_filter *filter, int
continue;
case BPF_LD|BPF_W|BPF_ABS:
k = fentry->k;
- load_w:
+load_w:
ptr = load_pointer(skb, k, 4, &tmp);
if (ptr != NULL) {
A = ntohl(*(u32 *)ptr);
@@ -184,7 +183,7 @@ unsigned int sk_run_filter(struct sk_buff *skb, struct sock_filter *filter, int
break;
case BPF_LD|BPF_H|BPF_ABS:
k = fentry->k;
- load_h:
+load_h:
ptr = load_pointer(skb, k, 2, &tmp);
if (ptr != NULL) {
A = ntohs(*(u16 *)ptr);
@@ -374,7 +373,7 @@ int sk_chk_filter(struct sock_filter *filter, int flen)
case BPF_JMP|BPF_JSET|BPF_K:
case BPF_JMP|BPF_JSET|BPF_X:
/* for conditionals both must be safe */
- if (pc + ftest->jt + 1 >= flen ||
+ if (pc + ftest->jt + 1 >= flen ||
pc + ftest->jf + 1 >= flen)
return -EINVAL;
break;
@@ -384,7 +383,7 @@ int sk_chk_filter(struct sock_filter *filter, int flen)
}
}
- return (BPF_CLASS(filter[flen - 1].code) == BPF_RET) ? 0 : -EINVAL;
+ return (BPF_CLASS(filter[flen - 1].code) == BPF_RET) ? 0 : -EINVAL;
}
/**
@@ -404,8 +403,8 @@ int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk)
int err;
/* Make sure new filter is there and in the right amounts. */
- if (fprog->filter == NULL)
- return -EINVAL;
+ if (fprog->filter == NULL)
+ return -EINVAL;
fp = sock_kmalloc(sk, fsize+sizeof(*fp), GFP_KERNEL);
if (!fp)
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 281a632fa6a6..ea51f8d02eb8 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -703,7 +703,7 @@ int netpoll_setup(struct netpoll *np)
}
}
- if (!memcmp(np->local_mac, "\0\0\0\0\0\0", 6) && ndev->dev_addr)
+ if (is_zero_ether_addr(np->local_mac) && ndev->dev_addr)
memcpy(np->local_mac, ndev->dev_addr, 6);
if (!np->local_ip) {
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 39063122fbb7..3827f881f429 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -139,6 +139,7 @@
#include