ARM: dts: rockchip: add the support power-domain node on RK3288 SoCs

We can add more domains node in the future.
This patch add the needed clocks into power-controller.
As the discuess about all the device clocks being listed in
the power-domains itself.

There are several reasons as follows:

Firstly, the clocks need be turned off to save power when
the system enter the suspend state. So we need to enumerate
the clocks in the dts. In order to power domain can turn on and off.

Secondly, the reset-circuit should reset be synchronous on RK3288,
then sync revoked. So we need to enable clocks of all devices.
In other words, we have to enable the clocks before you operate them
if all the device clocks are included in someone domians.

Thirdly, as the chip designs for PM hardhare. we need turn on the noc
clocks, if we are operating the "pd_vio" domain to enter the idle status.
The device's clock be included in domains that needed turn on if do that.

The clocks in the dts are needed to enable before you want to happy work.
At the moment, This patch is very good work for PM hardware.

Also, we can add these clocks in the future if we have some hidden clocks.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Michael Turquette <mturquette@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>

[add necessary power-domain properties to keep drm subsys working]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm/boot/dts/rk3288.dtsi

@@ -44,6 +44,7 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/clock/rk3288-cru.h>
 #include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/power/rk3288-power.h>
 #include "skeleton.dtsi"
 
 / {
@@ -613,8 +614,98 @@ sram@ff720000 {
 	};
 
 	pmu: power-management@ff730000 {
-		compatible = "rockchip,rk3288-pmu", "syscon";
+		compatible = "rockchip,rk3288-pmu", "syscon", "simple-mfd";
 		reg = <0xff730000 0x100>;
+
+		power: power-controller {
+			compatible = "rockchip,rk3288-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/*
+			 * Note: Although SCLK_* are the working clocks
+			 * of device without including on the NOC, needed for
+			 * synchronous reset.
+			 *
+			 * The clocks on the which NOC:
+			 * ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU.
+			 * ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU.
+			 * ACLK_RGA is on ACLK_RGA_NIU.
+			 * The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU.
+			 *
+			 * Which clock are device clocks:
+			 *	clocks		devices
+			 *	*_IEP		IEP:Image Enhancement Processor
+			 *	*_ISP		ISP:Image Signal Processing
+			 *	*_VIP		VIP:Video Input Processor
+			 *	*_VOP*		VOP:Visual Output Processor
+			 *	*_RGA		RGA
+			 *	*_EDP*		EDP
+			 *	*_LVDS_*	LVDS
+			 *	*_HDMI		HDMI
+			 *	*_MIPI_*	MIPI
+			 */
+			pd_vio {
+				reg = <RK3288_PD_VIO>;
+				clocks = <&cru ACLK_IEP>,
+					 <&cru ACLK_ISP>,
+					 <&cru ACLK_RGA>,
+					 <&cru ACLK_VIP>,
+					 <&cru ACLK_VOP0>,
+					 <&cru ACLK_VOP1>,
+					 <&cru DCLK_VOP0>,
+					 <&cru DCLK_VOP1>,
+					 <&cru HCLK_IEP>,
+					 <&cru HCLK_ISP>,
+					 <&cru HCLK_RGA>,
+					 <&cru HCLK_VIP>,
+					 <&cru HCLK_VOP0>,
+					 <&cru HCLK_VOP1>,
+					 <&cru PCLK_EDP_CTRL>,
+					 <&cru PCLK_HDMI_CTRL>,
+					 <&cru PCLK_LVDS_PHY>,
+					 <&cru PCLK_MIPI_CSI>,
+					 <&cru PCLK_MIPI_DSI0>,
+					 <&cru PCLK_MIPI_DSI1>,
+					 <&cru SCLK_EDP_24M>,
+					 <&cru SCLK_EDP>,
+					 <&cru SCLK_ISP_JPE>,
+					 <&cru SCLK_ISP>,
+					 <&cru SCLK_RGA>;
+			};
+
+			/*
+			 * Note: The following 3 are HEVC(H.265) clocks,
+			 * and on the ACLK_HEVC_NIU (NOC).
+			 */
+			pd_hevc {
+				reg = <RK3288_PD_HEVC>;
+				clocks = <&cru ACLK_HEVC>,
+					 <&cru SCLK_HEVC_CABAC>,
+					 <&cru SCLK_HEVC_CORE>;
+			};
+
+			/*
+			 * Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC
+			 * (video endecoder & decoder) clocks that on the
+			 * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
+			 */
+			pd_video {
+				reg = <RK3288_PD_VIDEO>;
+				clocks = <&cru ACLK_VCODEC>,
+					 <&cru HCLK_VCODEC>;
+			};
+
+			/*
+			 * Note: ACLK_GPU is the GPU clock,
+			 * and on the ACLK_GPU_NIU (NOC).
+			 */
+			pd_gpu {
+				reg = <RK3288_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+			};
+		};
 	};
 
 	sgrf: syscon@ff740000 {
@@ -674,6 +765,7 @@ vopb: vop@ff930000 {
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
 		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		power-domains = <&power RK3288_PD_VIO>;
 		resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
 		reset-names = "axi", "ahb", "dclk";
 		iommus = <&vopb_mmu>;
@@ -695,6 +787,7 @@ vopb_mmu: iommu@ff930300 {
 		reg = <0xff930300 0x100>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "vopb_mmu";
+		power-domains = <&power RK3288_PD_VIO>;
 		#iommu-cells = <0>;
 		status = "disabled";
 	};
@@ -705,6 +798,7 @@ vopl: vop@ff940000 {
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
 		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		power-domains = <&power RK3288_PD_VIO>;
 		resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
 		reset-names = "axi", "ahb", "dclk";
 		iommus = <&vopl_mmu>;
@@ -726,6 +820,7 @@ vopl_mmu: iommu@ff940300 {
 		reg = <0xff940300 0x100>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "vopl_mmu";
+		power-domains = <&power RK3288_PD_VIO>;
 		#iommu-cells = <0>;
 		status = "disabled";
 	};
@@ -738,6 +833,7 @@ hdmi: hdmi@ff980000 {
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
 		clock-names = "iahb", "isfr";
+		power-domains = <&power RK3288_PD_VIO>;
 		status = "disabled";
 
 		ports {