[PATCH] const struct tty_operations

As part of an SMP cleanliness pass over UML, I consted a bunch of
structures in order to not have to document their locking.  One of these
structures was a struct tty_operations.  In order to const it in UML
without introducing compiler complaints, the declaration of
tty_set_operations needs to be changed, and then all of its callers need to
be fixed.

This patch declares all struct tty_operations in the tree as const.  In all
cases, they are static and used only as input to tty_set_operations.  As an
extra check, I ran an i386 allyesconfig build which produced no extra
warnings.

53 drivers are affected.  I checked the history of a bunch of them, and in
most cases, there have been only a handful of maintenance changes in the
last six months.  serial_core.c was the busiest one that I looked at.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/alpha/kernel/srmcons.c

@@ -229,7 +229,7 @@ srmcons_close(struct tty_struct *tty, struct file *filp)
 
 static struct tty_driver *srmcons_driver;
 
-static struct tty_operations srmcons_ops = {
+static const struct tty_operations srmcons_ops = {
 	.open		= srmcons_open,
 	.close		= srmcons_close,
 	.write		= srmcons_write,

arch/ia64/hp/sim/simserial.c

@@ -940,7 +940,7 @@ static inline void show_serial_version(void)
 	printk(KERN_INFO " no serial options enabled\n");
 }
 
-static struct tty_operations hp_ops = {
+static const struct tty_operations hp_ops = {
 	.open = rs_open,
 	.close = rs_close,
 	.write = rs_write,

arch/ppc/4xx_io/serial_sicc.c

@@ -1720,7 +1720,7 @@ static int siccuart_open(struct tty_struct *tty, struct file *filp)
     return 0;
 }
 
-static struct tty_operations sicc_ops = {
+static const struct tty_operations sicc_ops = {
 	.open = siccuart_open,
 	.close = siccuart_close,
 	.write = siccuart_write,

arch/um/drivers/line.c

@@ -642,9 +642,9 @@ int line_remove(struct line *lines, unsigned int num, int n)
 }
 
 struct tty_driver *line_register_devfs(struct lines *set,
-			 struct line_driver *line_driver,
-			 struct tty_operations *ops, struct line *lines,
-			 int nlines)
+				       struct line_driver *line_driver,
+				       const struct tty_operations *ops,
+				       struct line *lines, int nlines)
 {
 	int i;
 	struct tty_driver *driver = alloc_tty_driver(nlines);

arch/um/include/line.h

@@ -91,10 +91,9 @@ extern int line_setup_irq(int fd, int input, int output, struct line *line,
 			  void *data);
 extern void line_close_chan(struct line *line);
 extern struct tty_driver * line_register_devfs(struct lines *set,
-				struct line_driver *line_driver,
-				struct tty_operations *driver,
-				struct line *lines,
-				int nlines);
+					       struct line_driver *line_driver,
+					       const struct tty_operations *driver,
+					       struct line *lines, int nlines);
 extern void lines_init(struct line *lines, int nlines, struct chan_opts *opts);
 extern void close_lines(struct line *lines, int nlines);
 

arch/v850/kernel/memcons.c

@@ -104,7 +104,7 @@ int memcons_tty_chars_in_buffer (struct tty_struct *tty)
 	return 0;
 }
 
-static struct tty_operations ops = {
+static const struct tty_operations ops = {
 	.open = memcons_tty_open,
 	.write = memcons_tty_write,
 	.write_room = memcons_tty_write_room,

arch/v850/kernel/simcons.c

@@ -77,7 +77,7 @@ int simcons_tty_chars_in_buffer (struct tty_struct *tty)
 	return 0;
 }
 
-static struct tty_operations ops = {
+static const struct tty_operations ops = {
 	.open = simcons_tty_open,
 	.write = simcons_tty_write,
 	.write_room = simcons_tty_write_room,

arch/xtensa/platform-iss/console.c

@@ -191,7 +191,7 @@ static int rs_read_proc(char *page, char **start, off_t off, int count,
 }
 
 
-static struct tty_operations serial_ops = {
+static const struct tty_operations serial_ops = {
 	.open = rs_open,
 	.close = rs_close,
 	.write = rs_write,

drivers/char/amiserial.c

@@ -1958,7 +1958,7 @@ static void show_serial_version(void)
 }
 
 
-static struct tty_operations serial_ops = {
+static const struct tty_operations serial_ops = {
 	.open = rs_open,
 	.close = rs_close,
 	.write = rs_write,

drivers/char/cyclades.c

@@ -5205,7 +5205,7 @@ cyclades_get_proc_info(char *buf, char **start, off_t offset, int length,
     extra ports are ignored.
  */
 
-static struct tty_operations cy_ops = {
+static const struct tty_operations cy_ops = {
     .open = cy_open,
     .close = cy_close,
     .write = cy_write,

drivers/char/epca.c

@@ -1125,7 +1125,7 @@ static void __exit epca_module_exit(void)
 
 module_exit(epca_module_exit);
 
-static struct tty_operations pc_ops = {
+static const struct tty_operations pc_ops = {
 	.open = pc_open,
 	.close = pc_close,
 	.write = pc_write,

drivers/char/esp.c

@@ -2376,7 +2376,7 @@ static inline int autoconfig(struct esp_struct * info)
 	return (port_detected);
 }
 
-static struct tty_operations esp_ops = {
+static const struct tty_operations esp_ops = {
 	.open = esp_open,
 	.close = rs_close,
 	.write = rs_write,

drivers/char/hvc_console.c

@@ -696,7 +696,7 @@ int khvcd(void *unused)
 	return 0;
 }
 
-static struct tty_operations hvc_ops = {
+static const struct tty_operations hvc_ops = {
 	.open = hvc_open,
 	.close = hvc_close,
 	.write = hvc_write,

drivers/char/hvcs.c

@@ -1306,7 +1306,7 @@ static int hvcs_chars_in_buffer(struct tty_struct *tty)
 	return hvcsd->chars_in_buffer;
 }
 
-static struct tty_operations hvcs_ops = {
+static const struct tty_operations hvcs_ops = {
 	.open = hvcs_open,
 	.close = hvcs_close,
 	.hangup = hvcs_hangup,

drivers/char/hvsi.c

@@ -1130,7 +1130,7 @@ static int hvsi_tiocmset(struct tty_struct *tty, struct file *file,
 }
 
 
-static struct tty_operations hvsi_ops = {
+static const struct tty_operations hvsi_ops = {
 	.open = hvsi_open,
 	.close = hvsi_close,
 	.write = hvsi_write,

drivers/char/ip2/ip2main.c

@@ -458,7 +458,7 @@ cleanup_module(void)
 }
 #endif /* MODULE */
 
-static struct tty_operations ip2_ops = {
+static const struct tty_operations ip2_ops = {
 	.open            = ip2_open,
 	.close           = ip2_close,
 	.write           = ip2_write,

drivers/char/isicom.c

@@ -1550,7 +1550,7 @@ static void isicom_unregister_ioregion(struct pci_dev *pdev)
 	board->base = 0;
 }
 
-static struct tty_operations isicom_ops = {
+static const struct tty_operations isicom_ops = {
 	.open			= isicom_open,
 	.close			= isicom_close,
 	.write			= isicom_write,

drivers/char/istallion.c

@@ -4636,7 +4636,7 @@ static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, un
 	return rc;
 }
 
-static struct tty_operations stli_ops = {
+static const struct tty_operations stli_ops = {
 	.open = stli_open,
 	.close = stli_close,
 	.write = stli_write,

drivers/char/moxa.c

@@ -281,7 +281,7 @@ static int moxa_get_serial_info(struct moxa_str *, struct serial_struct __user *
 static int moxa_set_serial_info(struct moxa_str *, struct serial_struct __user *);
 static void MoxaSetFifo(int port, int enable);
 
-static struct tty_operations moxa_ops = {
+static const struct tty_operations moxa_ops = {
 	.open = moxa_open,
 	.close = moxa_close,
 	.write = moxa_write,

drivers/char/mxser.c

@@ -453,7 +453,7 @@ static int CheckIsMoxaMust(int io)
 
 /* above is modified by Victor Yu. 08-15-2002 */
 
-static struct tty_operations mxser_ops = {
+static const struct tty_operations mxser_ops = {
 	.open = mxser_open,
 	.close = mxser_close,
 	.write = mxser_write,

drivers/char/pcmcia/synclink_cs.c

@@ -3010,7 +3010,7 @@ static struct pcmcia_driver mgslpc_driver = {
 	.resume		= mgslpc_resume,
 };
 
-static struct tty_operations mgslpc_ops = {
+static const struct tty_operations mgslpc_ops = {
 	.open = mgslpc_open,
 	.close = mgslpc_close,
 	.write = mgslpc_write,

drivers/char/pty.c

@@ -224,7 +224,7 @@ static void pty_set_termios(struct tty_struct *tty, struct termios *old_termios)
         tty->termios->c_cflag |= (CS8 | CREAD);
 }
 
-static struct tty_operations pty_ops = {
+static const struct tty_operations pty_ops = {
 	.open = pty_open,
 	.close = pty_close,
 	.write = pty_write,

drivers/char/rio/rio_linux.c

@@ -727,7 +727,7 @@ static struct vpd_prom *get_VPD_PROM(struct Host *hp)
 	return &vpdp;
 }
 
-static struct tty_operations rio_ops = {
+static const struct tty_operations rio_ops = {
 	.open = riotopen,
 	.close = gs_close,
 	.write = gs_write,

drivers/char/riscom8.c

@@ -1583,7 +1583,7 @@ static void do_softint(void *private_)
 	}
 }
 
-static struct tty_operations riscom_ops = {
+static const struct tty_operations riscom_ops = {
 	.open  = rc_open,
 	.close = rc_close,
 	.write = rc_write,

drivers/char/rocket.c

@@ -2334,7 +2334,7 @@ static int __init init_ISA(int i)
 	return (1);
 }
 
-static struct tty_operations rocket_ops = {
+static const struct tty_operations rocket_ops = {
 	.open = rp_open,
 	.close = rp_close,
 	.write = rp_write,

drivers/char/ser_a2232.c

@@ -661,7 +661,7 @@ static void a2232_init_portstructs(void)
 	}
 }
 
-static struct tty_operations a2232_ops = {
+static const struct tty_operations a2232_ops = {
 	.open = a2232_open,
 	.close = gs_close,
 	.write = gs_write,

drivers/char/serial167.c

@@ -2158,7 +2158,7 @@ mvme167_serial_console_setup(int cflag)
 					rcor >> 5, rbpr);
 } /* serial_console_init */
 
-static struct tty_operations cy_ops = {
+static const struct tty_operations cy_ops = {
 	.open = cy_open,
 	.close = cy_close,
 	.write = cy_write,

drivers/char/specialix.c

@@ -2363,7 +2363,7 @@ static void do_softint(void *private_)
 	func_exit();
 }
 
-static struct tty_operations sx_ops = {
+static const struct tty_operations sx_ops = {
 	.open  = sx_open,
 	.close = sx_close,
 	.write = sx_write,

drivers/char/stallion.c

@@ -2993,7 +2993,7 @@ static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, uns
 	return(rc);
 }
 
-static struct tty_operations stl_ops = {
+static const struct tty_operations stl_ops = {
 	.open = stl_open,
 	.close = stl_close,
 	.write = stl_write,

drivers/char/sx.c

@@ -2226,7 +2226,7 @@ static int probe_si (struct sx_board *board)
 	return 1;
 }
 
-static struct tty_operations sx_ops = {
+static const struct tty_operations sx_ops = {
 	.break_ctl = sx_break,
 	.open	= sx_open,
 	.close = gs_close,

drivers/char/synclink.c

@@ -4360,7 +4360,7 @@ static struct mgsl_struct* mgsl_allocate_device(void)
 
 }	/* end of mgsl_allocate_device()*/
 
-static struct tty_operations mgsl_ops = {
+static const struct tty_operations mgsl_ops = {
 	.open = mgsl_open,
 	.close = mgsl_close,
 	.write = mgsl_write,

drivers/char/synclink_gt.c

@@ -3441,7 +3441,7 @@ static void __devexit remove_one(struct pci_dev *dev)
 {
 }
 
-static struct tty_operations ops = {
+static const struct tty_operations ops = {
 	.open = open,
 	.close = close,
 	.write = write,

drivers/char/synclinkmp.c

@@ -3929,7 +3929,7 @@ void device_init(int adapter_num, struct pci_dev *pdev)
 	}
 }
 
-static struct tty_operations ops = {
+static const struct tty_operations ops = {
 	.open = open,
 	.close = close,
 	.write = write,

drivers/char/tty_io.c

@@ -3680,7 +3680,8 @@ void put_tty_driver(struct tty_driver *driver)
 	kfree(driver);
 }
 
-void tty_set_operations(struct tty_driver *driver, struct tty_operations *op)
+void tty_set_operations(struct tty_driver *driver,
+			const struct tty_operations *op)
 {
 	driver->open = op->open;
 	driver->close = op->close;

drivers/char/viocons.c

@@ -1047,7 +1047,7 @@ static int send_open(HvLpIndex remoteLp, void *sem)
 			0, 0, 0, 0);
 }
 
-static struct tty_operations serial_ops = {
+static const struct tty_operations serial_ops = {
 	.open = viotty_open,
 	.close = viotty_close,
 	.write = viotty_write,

drivers/char/vme_scc.c

@@ -113,7 +113,7 @@ static struct real_driver scc_real_driver = {
 };
 
 
-static struct tty_operations scc_ops = {
+static const struct tty_operations scc_ops = {
 	.open	= scc_open,
 	.close = gs_close,
 	.write = gs_write,

drivers/char/vt.c

@@ -2675,7 +2675,7 @@ static int __init con_init(void)
 }
 console_initcall(con_init);
 
-static struct tty_operations con_ops = {
+static const struct tty_operations con_ops = {
 	.open = con_open,
 	.close = con_close,
 	.write = con_write,

drivers/isdn/capi/capi.c

@@ -1298,7 +1298,7 @@ static int capinc_tty_read_proc(char *page, char **start, off_t off,
 
 static struct tty_driver *capinc_tty_driver;
 
-static struct tty_operations capinc_ops = {
+static const struct tty_operations capinc_ops = {
 	.open = capinc_tty_open,
 	.close = capinc_tty_close,
 	.write = capinc_tty_write,

drivers/isdn/gigaset/interface.c

@@ -134,7 +134,7 @@ static int  if_tiocmset(struct tty_struct *tty, struct file *file,
 static int  if_write(struct tty_struct *tty,
 		     const unsigned char *buf, int count);
 
-static struct tty_operations if_ops = {
+static const struct tty_operations if_ops = {
 	.open =			if_open,
 	.close =		if_close,
 	.ioctl =		if_ioctl,

drivers/isdn/i4l/isdn_tty.c

@@ -1860,7 +1860,7 @@ modem_write_profile(atemu * m)
 		send_sig(SIGIO, dev->profd, 1);
 }
 
-static struct tty_operations modem_ops = {
+static const struct tty_operations modem_ops = {
         .open = isdn_tty_open,
 	.close = isdn_tty_close,
 	.write = isdn_tty_write,

drivers/s390/char/con3215.c

@@ -1103,7 +1103,7 @@ tty3215_start(struct tty_struct *tty)
 	}
 }
 
-static struct tty_operations tty3215_ops = {
+static const struct tty_operations tty3215_ops = {
 	.open = tty3215_open,
 	.close = tty3215_close,
 	.write = tty3215_write,

drivers/s390/char/sclp_tty.c

@@ -711,7 +711,7 @@ static struct sclp_register sclp_input_event =
 	.receiver_fn = sclp_tty_receiver
 };
 
-static struct tty_operations sclp_ops = {
+static const struct tty_operations sclp_ops = {
 	.open = sclp_tty_open,
 	.close = sclp_tty_close,
 	.write = sclp_tty_write,

drivers/s390/char/sclp_vt220.c

@@ -655,7 +655,7 @@ __sclp_vt220_init(int early)
 	return 0;
 }
 
-static struct tty_operations sclp_vt220_ops = {
+static const struct tty_operations sclp_vt220_ops = {
 	.open = sclp_vt220_open,
 	.close = sclp_vt220_close,
 	.write = sclp_vt220_write,

drivers/s390/char/tty3270.c

@@ -1737,7 +1737,7 @@ tty3270_ioctl(struct tty_struct *tty, struct file *file,
 	return kbd_ioctl(tp->kbd, file, cmd, arg);
 }
 
-static struct tty_operations tty3270_ops = {
+static const struct tty_operations tty3270_ops = {
 	.open = tty3270_open,
 	.close = tty3270_close,
 	.write = tty3270_write,

drivers/sbus/char/aurora.c

@@ -2187,7 +2187,7 @@ static void do_softint(void *private_)
 #endif
 }
 
-static struct tty_operations aurora_ops = {
+static const struct tty_operations aurora_ops = {
 	.open  = aurora_open,
 	.close = aurora_close,
 	.write = aurora_write,

drivers/serial/68328serial.c

@@ -1378,7 +1378,7 @@ void startup_console(void)
 #endif /* CONFIG_PM_LEGACY */
 
 
-static struct tty_operations rs_ops = {
+static const struct tty_operations rs_ops = {
 	.open = rs_open,
 	.close = rs_close,
 	.write = rs_write,

drivers/serial/68360serial.c

@@ -2424,7 +2424,7 @@ long console_360_init(long kmem_start, long kmem_end)
 */
 static	int	baud_idx;
 
-static struct tty_operations rs_360_ops = {
+static const struct tty_operations rs_360_ops = {
 	.owner = THIS_MODULE,
 	.open = rs_360_open,
 	.close = rs_360_close,

drivers/serial/crisv10.c

@@ -4825,7 +4825,7 @@ show_serial_version(void)
 
 /* rs_init inits the driver at boot (using the module_init chain) */
 
-static struct tty_operations rs_ops = {
+static const struct tty_operations rs_ops = {
 	.open = rs_open,
 	.close = rs_close,
 	.write = rs_write,

drivers/serial/mcfserial.c

@@ -1666,7 +1666,7 @@ static void show_serial_version(void)
 	printk(mcfrs_drivername);
 }
 
-static struct tty_operations mcfrs_ops = {
+static const struct tty_operations mcfrs_ops = {
 	.open = mcfrs_open,
 	.close = mcfrs_close,
 	.write = mcfrs_write,

drivers/serial/serial_core.c

@@ -2111,7 +2111,7 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 	}
 }
 
-static struct tty_operations uart_ops = {
+static const struct tty_operations uart_ops = {
 	.open		= uart_open,
 	.close		= uart_close,
 	.write		= uart_write,

drivers/tc/zs.c

@@ -1701,7 +1701,7 @@ static void __init probe_sccs(void)
 	spin_unlock_irqrestore(&zs_lock, flags);
 }
 
-static struct tty_operations serial_ops = {
+static const struct tty_operations serial_ops = {
 	.open = rs_open,
 	.close = rs_close,
 	.write = rs_write,

drivers/usb/class/cdc-acm.c

@@ -1120,7 +1120,7 @@ static struct usb_driver acm_driver = {
  * TTY driver structures.
  */
 
-static struct tty_operations acm_ops = {
+static const struct tty_operations acm_ops = {
 	.open =			acm_tty_open,
 	.close =		acm_tty_close,
 	.write =		acm_tty_write,

drivers/usb/gadget/serial.c

@@ -271,7 +271,7 @@ static unsigned int use_acm = GS_DEFAULT_USE_ACM;
 
 
 /* tty driver struct */
-static struct tty_operations gs_tty_ops = {
+static const struct tty_operations gs_tty_ops = {
 	.open =			gs_open,
 	.close =		gs_close,
 	.write =		gs_write,

drivers/usb/serial/usb-serial.c

@@ -1015,7 +1015,7 @@ void usb_serial_disconnect(struct usb_interface *interface)
 	dev_info(dev, "device disconnected\n");
 }
 
-static struct tty_operations serial_ops = {
+static const struct tty_operations serial_ops = {
 	.open =			serial_open,
 	.close =		serial_close,
 	.write =		serial_write,

include/linux/tty_driver.h

@@ -219,7 +219,8 @@ extern struct list_head tty_drivers;
 
 struct tty_driver *alloc_tty_driver(int lines);
 void put_tty_driver(struct tty_driver *driver);
-void tty_set_operations(struct tty_driver *driver, struct tty_operations *op);
+void tty_set_operations(struct tty_driver *driver,
+			const struct tty_operations *op);
 
 /* tty driver magic number */
 #define TTY_DRIVER_MAGIC		0x5402

net/bluetooth/rfcomm/tty.c

@@ -1011,7 +1011,7 @@ static int rfcomm_tty_tiocmset(struct tty_struct *tty, struct file *filp, unsign
 
 /* ---- TTY structure ---- */
 
-static struct tty_operations rfcomm_ops = {
+static const struct tty_operations rfcomm_ops = {
 	.open			= rfcomm_tty_open,
 	.close			= rfcomm_tty_close,
 	.write			= rfcomm_tty_write,

net/irda/ircomm/ircomm_tty.c

@@ -79,7 +79,7 @@ static struct tty_driver *driver;
 
 hashbin_t *ircomm_tty = NULL;
 
-static struct tty_operations ops = {
+static const struct tty_operations ops = {
 	.open            = ircomm_tty_open,
 	.close           = ircomm_tty_close,
 	.write           = ircomm_tty_write,