openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

pinctrl: uniphier: set input-enable before pin-muxing 

While IECTRL is disabled, input signals are pulled-down internally.
If pin-muxing is set up first, glitch signals (Low to High transition)
might be input to hardware blocks.

Bad case scenario:
[1] The hardware block is already running before pinctrl is handled.
   (the reset is de-asserted by default or by a firmware, for example)
[2] The pin-muxing is set up.  The input signals to hardware block
    are pulled-down by the chip-internal biasing.
[3] The pins are input-enabled.  The signals from the board reach the
    hardware block.

Actually, one invalid character is input to the UART blocks for such
SoCs as PH1-LD4, PH1-sLD8, where UART devices start to run at the
power on reset.

To avoid such problems, pins should be input-enabled before muxing.

Fixes: 6e90889202 ("pinctrl: UniPhier: add UniPhier pinctrl core support")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reported-by: Dai Okamura <okamura.dai@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Masahiro Yamada 2015-10-20 17:25:09 +09:00 committed by Linus Walleij
parent e0548004d4
commit bac7f4c1bf
1 changed files with 7 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
drivers/pinctrl/uniphier/pinctrl-uniphier-core.c
View File

@ -539,6 +539,12 @@ static int uniphier_pmx_set_one_mux(struct pinctrl_dev *pctldev, unsigned pin,
unsigned reg, reg_end, shift, mask;
int ret;
/* some pins need input-enabling */
ret = uniphier_conf_pin_input_enable(pctldev,
&pctldev->desc->pins[pin], 1);
if (ret)
return ret;
reg = UNIPHIER_PINCTRL_PINMUX_BASE + pin * mux_bits / 32 * reg_stride;
reg_end = reg + reg_stride;
shift = pin * mux_bits % 32;
@ -563,9 +569,7 @@ static int uniphier_pmx_set_one_mux(struct pinctrl_dev *pctldev, unsigned pin,
return ret;
}
/* some pins need input-enabling */
return uniphier_conf_pin_input_enable(pctldev,
&pctldev->desc->pins[pin], 1);
return 0;
}
static int uniphier_pmx_set_mux(struct pinctrl_dev *pctldev,