Char/Misc drivers for 4.14-rc1

Here is the big char/misc driver update for 4.14-rc1. Lots of different stuff in here, it's been an active development cycle for some reason. Highlights are: - updated binder driver, this brings binder up to date with what shipped in the Android O release, plus some more changes that happened since then that are in the Android development trees. - coresight updates and fixes - mux driver file renames to be a bit "nicer" - intel_th driver updates - normal set of hyper-v updates and changes - small fpga subsystem and driver updates - lots of const code changes all over the driver trees - extcon driver updates - fmc driver subsystem upadates - w1 subsystem minor reworks and new features and drivers added - spmi driver updates Plus a smattering of other minor driver updates and fixes. All of these have been in linux-next with no reported issues for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa1+Ew8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yl26wCgquufNylfhxr65NbJrovduJYzRnUAniCivXg8 bePIh/JI5WxWoHK+wEbY =hYWx -----END PGP SIGNATURE----- Merge tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver update for 4.14-rc1. Lots of different stuff in here, it's been an active development cycle for some reason. Highlights are: - updated binder driver, this brings binder up to date with what shipped in the Android O release, plus some more changes that happened since then that are in the Android development trees. - coresight updates and fixes - mux driver file renames to be a bit "nicer" - intel_th driver updates - normal set of hyper-v updates and changes - small fpga subsystem and driver updates - lots of const code changes all over the driver trees - extcon driver updates - fmc driver subsystem upadates - w1 subsystem minor reworks and new features and drivers added - spmi driver updates Plus a smattering of other minor driver updates and fixes. All of these have been in linux-next with no reported issues for a while" * tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (244 commits) ANDROID: binder: don't queue async transactions to thread. ANDROID: binder: don't enqueue death notifications to thread todo. ANDROID: binder: Don't BUG_ON(!spin_is_locked()). ANDROID: binder: Add BINDER_GET_NODE_DEBUG_INFO ioctl ANDROID: binder: push new transactions to waiting threads. ANDROID: binder: remove proc waitqueue android: binder: Add page usage in binder stats android: binder: fixup crash introduced by moving buffer hdr drivers: w1: add hwmon temp support for w1_therm drivers: w1: refactor w1_slave_show to make the temp reading functionality separate drivers: w1: add hwmon support structures eeprom: idt_89hpesx: Support both ACPI and OF probing mcb: Fix an error handling path in 'chameleon_parse_cells()' MCB: add support for SC31 to mcb-lpc mux: make device_type const char: virtio: constify attribute_group structures. Documentation/ABI: document the nvmem sysfs files lkdtm: fix spelling mistake: "incremeted" -> "incremented" perf: cs-etm: Fix ETMv4 CONFIGR entry in perf.data file nvmem: include linux/err.h from header ...
2017-09-05 11:08:17 -07:00 · 2017-09-05 11:08:17 -07:00 · bafb0762cb
parent 44b1671fae 3a6430ce46
commit bafb0762cb
175 changed files with 9546 additions and 3095 deletions
--- a/Documentation/ABI/stable/sysfs-bus-nvmem
+++ b/Documentation/ABI/stable/sysfs-bus-nvmem
@ -0,0 +1,19 @@
+What:		/sys/bus/nvmem/devices/.../nvmem
+Date:		July 2015
+KernelVersion:  4.2
+Contact:	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+Description:
+		This file allows user to read/write the raw NVMEM contents.
+		Permissions for write to this file depends on the nvmem
+		provider configuration.
+
+		ex:
+		hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+
+		0000000 0000 0000 0000 0000 0000 0000 0000 0000
+		*
+		00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
+		0000000 0000 0000 0000 0000 0000 0000 0000 0000
+		...
+		*
+		0001000
--- a/Documentation/ABI/testing/sysfs-bus-thunderbolt
+++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt
@ -45,6 +45,8 @@ Contact:	thunderbolt-software@lists.01.org
 Description:	When a devices supports Thunderbolt secure connect it will
 		have this attribute. Writing 32 byte hex string changes
 		authorization to use the secure connection method instead.
+		Writing an empty string clears the key and regular connection
+		method can be used again.

 What:		/sys/bus/thunderbolt/devices/.../device
 Date:		Sep 2017
--- a/Documentation/ABI/testing/sysfs-driver-altera-cvp
+++ b/Documentation/ABI/testing/sysfs-driver-altera-cvp
@ -0,0 +1,8 @@
+What:		/sys/bus/pci/drivers/altera-cvp/chkcfg
+Date:		May 2017
+Kernel Version:	4.13
+Contact:	Anatolij Gustschin <agust@denx.de>
+Description:
+		Contains either 1 or 0 and controls if configuration
+		error checking in altera-cvp driver is turned on or
+		off.
--- a/Documentation/admin-guide/devices.txt
+++ b/Documentation/admin-guide/devices.txt
@ -3081,3 +3081,8 @@
 		  1 = /dev/osd1		Second OSD Device
 		  ...
 		  255 = /dev/osd255	256th OSD Device
+
+ 384-511 char	RESERVED FOR DYNAMIC ASSIGNMENT
+		Character devices that request a dynamic allocation of major
+		number will take numbers starting from 511 and downward,
+		once the 234-254 range is full.
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@ -34,8 +34,8 @@ its hardware characteristcs.
 		- Embedded Trace Macrocell (version 4.x):
 			"arm,coresight-etm4x", "arm,primecell";

-		- Qualcomm Configurable Replicator (version 1.x):
-			"qcom,coresight-replicator1x", "arm,primecell";
+		- Coresight programmable Replicator :
+			"arm,coresight-dynamic-replicator", "arm,primecell";

 		- System Trace Macrocell:
 			"arm,coresight-stm", "arm,primecell"; [1]
--- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt
@ -0,0 +1,24 @@
+ChromeOS EC USB Type-C cable and accessories detection
+
+On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is
+able to detect the state of external accessories such as display adapters
+or USB devices when said accessories are attached or detached.
+
+The node for this device must be under a cros-ec node like google,cros-ec-spi
+or google,cros-ec-i2c.
+
+Required properties:
+- compatible:		Should be "google,extcon-usbc-cros-ec".
+- google,usb-port-id:	Specifies the USB port ID to use.
+
+Example:
+	cros-ec@0 {
+		compatible = "google,cros-ec-i2c";
+
+		...
+
+		extcon {
+			compatible = "google,extcon-usbc-cros-ec";
+			google,usb-port-id = <0>;
+		};
+	}
--- a/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt
+++ b/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt
@ -0,0 +1,29 @@
+Altera Passive Serial SPI FPGA Manager
+
+Altera FPGAs support a method of loading the bitstream over what is
+referred to as "passive serial".
+The passive serial link is not technically SPI, and might require extra
+circuits in order to play nicely with other SPI slaves on the same bus.
+
+See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf
+
+Required properties:
+- compatible: Must be one of the following:
+	"altr,fpga-passive-serial",
+	"altr,fpga-arria10-passive-serial"
+- reg: SPI chip select of the FPGA
+- nconfig-gpios: config pin (referred to as nCONFIG in the manual)
+- nstat-gpios: status pin (referred to as nSTATUS in the manual)
+
+Optional properties:
+- confd-gpios: confd pin (referred to as CONF_DONE in the manual)
+
+Example:
+	fpga: fpga@0 {
+		compatible = "altr,fpga-passive-serial";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+		nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+		confd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+	};
--- a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
+++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
@ -0,0 +1,36 @@
+Xilinx LogiCORE Partial Reconfig Decoupler Softcore
+
+The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
+decouplers / fpga bridges.
+The controller can decouple/disable the bridges which prevents signal
+changes from passing through the bridge.  The controller can also
+couple / enable the bridges which allows traffic to pass through the
+bridge normally.
+
+The Driver supports only MMIO handling. A PR region can have multiple
+PR Decouplers which can be handled independently or chained via decouple/
+decouple_status signals.
+
+Required properties:
+- compatible		: Should contain "xlnx,pr-decoupler-1.00" followed by
+                          "xlnx,pr-decoupler"
+- regs			: base address and size for decoupler module
+- clocks		: input clock to IP
+- clock-names		: should contain "aclk"
+
+Optional properties:
+- bridge-enable		: 0 if driver should disable bridge at startup
+			  1 if driver should enable bridge at startup
+			  Default is to leave bridge in current state.
+
+See Documentation/devicetree/bindings/fpga/fpga-region.txt for generic bindings.
+
+Example:
+	fpga-bridge@100000450 {
+		compatible = "xlnx,pr-decoupler-1.00",
+			     "xlnx-pr-decoupler";
+		regs = <0x10000045 0x10>;
+		clocks = <&clkc 15>;
+		clock-names = "aclk";
+		bridge-enable = <0>;
+	};
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@ -175,6 +175,7 @@ kosagi	Sutajio Ko-Usagi PTE Ltd.
 kyo	Kyocera Corporation
 lacie	LaCie
 lantiq	Lantiq Semiconductor
+lattice	Lattice Semiconductor
 lego	LEGO Systems A/S
 lenovo	Lenovo Group Ltd.
 lg	LG Corporation
--- a/Documentation/devicetree/bindings/xilinx.txt
+++ b/Documentation/devicetree/bindings/xilinx.txt
@ -281,6 +281,8 @@
                      capabilities of the underlying ICAP hardware
                      differ between different families.  May be
                      'virtex2p', 'virtex4', or 'virtex5'.
+		- compatible : should contain "xlnx,xps-hwicap-1.00.a" or
+				"xlnx,opb-hwicap-1.00.b".

      vi) Xilinx Uart 16550

--- a/Documentation/trace/stm.txt
+++ b/Documentation/trace/stm.txt
@ -83,7 +83,7 @@ by writing the name of the desired stm device there, for example:
 $ echo dummy_stm.0 > /sys/class/stm_source/console/stm_source_link

 For examples on how to use stm_source interface in the kernel, refer
-to stm_console or stm_heartbeat drivers.
+to stm_console, stm_heartbeat or stm_ftrace drivers.

 Each stm_source device will need to assume a master and a range of
 channels, depending on how many channels it requires. These are
@ -107,5 +107,16 @@ console in the STP stream, create a "console" policy entry (see the
 beginning of this text on how to do that). When initialized, it will
 consume one channel.

+stm_ftrace
+==========
+
+This is another "stm_source" device, once the stm_ftrace has been
+linked with an stm device, and if "function" tracer is enabled,
+function address and parent function address which Ftrace subsystem
+would store into ring buffer will be exported via the stm device at
+the same time.
+
+Currently only Ftrace "function" tracer is supported.
+
 [1] https://software.intel.com/sites/default/files/managed/d3/3c/intel-th-developer-manual.pdf
 [2] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0444b/index.html
--- a/4
+++ b/4
@ -5362,10 +5362,11 @@ K:	fmc_d.*register

 FPGA MANAGER FRAMEWORK
 M:	Alan Tull <atull@kernel.org>
-R:	Moritz Fischer <moritz.fischer@ettus.com>
+R:	Moritz Fischer <mdf@kernel.org>
 L:	linux-fpga@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/atull/linux-fpga.git
+Q:	http://patchwork.kernel.org/project/linux-fpga/list/
 F:	Documentation/fpga/
 F:	Documentation/devicetree/bindings/fpga/
 F:	drivers/fpga/
@ -9484,6 +9485,7 @@ M:	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 S:	Maintained
 F:	drivers/nvmem/
 F:	Documentation/devicetree/bindings/nvmem/
+F:	Documentation/ABI/stable/sysfs-bus-nvmem
 F:	include/linux/nvmem-consumer.h
 F:	include/linux/nvmem-provider.h

--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@ -94,6 +94,15 @@ &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
 	status = "okay";
+
+	fpga: fpga@0 {
+		compatible = "altr,fpga-passive-serial";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_fpgaspi>;
+		nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+		nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	};
 };

 &ecspi3 {
@ -319,6 +328,13 @@ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
 		>;
 	};

+	pinctrl_fpgaspi: fpgaspigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
+		>;
+	};
+
 	pinctrl_gpminand: gpminandgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@ -28,6 +28,8 @@ struct ms_hyperv_info {
 	u32 features;
 	u32 misc_features;
 	u32 hints;
+	u32 max_vp_index;
+	u32 max_lp_index;
 };

 extern struct ms_hyperv_info ms_hyperv;
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@ -179,9 +179,15 @@ static void __init ms_hyperv_init_platform(void)
 	ms_hyperv.misc_features = cpuid_edx(HYPERV_CPUID_FEATURES);
 	ms_hyperv.hints    = cpuid_eax(HYPERV_CPUID_ENLIGHTMENT_INFO);

-	pr_info("HyperV: features 0x%x, hints 0x%x\n",
+	pr_info("Hyper-V: features 0x%x, hints 0x%x\n",
 		ms_hyperv.features, ms_hyperv.hints);

+	ms_hyperv.max_vp_index = cpuid_eax(HVCPUID_IMPLEMENTATION_LIMITS);
+	ms_hyperv.max_lp_index = cpuid_ebx(HVCPUID_IMPLEMENTATION_LIMITS);
+
+	pr_debug("Hyper-V: max %u virtual processors, %u logical processors\n",
+		 ms_hyperv.max_vp_index, ms_hyperv.max_lp_index);
+
 	/*
 	 * Extract host information.
 	 */
@ -214,7 +220,7 @@ static void __init ms_hyperv_init_platform(void)
 		rdmsrl(HV_X64_MSR_APIC_FREQUENCY, hv_lapic_frequency);
 		hv_lapic_frequency = div_u64(hv_lapic_frequency, HZ);
 		lapic_timer_frequency = hv_lapic_frequency;
-		pr_info("HyperV: LAPIC Timer Frequency: %#x\n",
+		pr_info("Hyper-V: LAPIC Timer Frequency: %#x\n",
 			lapic_timer_frequency);
 	}

@ -248,7 +254,7 @@ static void __init ms_hyperv_init_platform(void)
 }

 const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = {
-	.name			= "Microsoft HyperV",
+	.name			= "Microsoft Hyper-V",
 	.detect			= ms_hyperv_platform,
 	.init_platform		= ms_hyperv_init_platform,
 };
--- a/block/genhd.c
+++ b/block/genhd.c
@ -242,6 +242,7 @@ EXPORT_SYMBOL_GPL(disk_map_sector_rcu);
 * Can be deleted altogether. Later.
 *
 */
+#define BLKDEV_MAJOR_HASH_SIZE 255
 static struct blk_major_name {
 	struct blk_major_name *next;
 	int major;
@ -259,12 +260,11 @@ void blkdev_show(struct seq_file *seqf, off_t offset)
 {
 	struct blk_major_name *dp;

-	if (offset < BLKDEV_MAJOR_HASH_SIZE) {
-		mutex_lock(&block_class_lock);
-		for (dp = major_names[offset]; dp; dp = dp->next)
+	mutex_lock(&block_class_lock);
+	for (dp = major_names[major_to_index(offset)]; dp; dp = dp->next)
+		if (dp->major == offset)
 			seq_printf(seqf, "%3d %s\n", dp->major, dp->name);
-		mutex_unlock(&block_class_lock);
-	}
+	mutex_unlock(&block_class_lock);
 }
 #endif /* CONFIG_PROC_FS */

@ -309,6 +309,14 @@ int register_blkdev(unsigned int major, const char *name)
 		ret = major;
 	}

+	if (major >= BLKDEV_MAJOR_MAX) {
+		pr_err("register_blkdev: major requested (%d) is greater than the maximum (%d) for %s\n",
+		       major, BLKDEV_MAJOR_MAX, name);
+
+		ret = -EINVAL;
+		goto out;
+	}
+
 	p = kmalloc(sizeof(struct blk_major_name), GFP_KERNEL);
 	if (p == NULL) {
 		ret = -ENOMEM;
--- a/drivers/android/Kconfig
+++ b/drivers/android/Kconfig
@ -22,7 +22,7 @@ config ANDROID_BINDER_IPC
 config ANDROID_BINDER_DEVICES
 	string "Android Binder devices"
 	depends on ANDROID_BINDER_IPC
-	default "binder,hwbinder"
+	default "binder,hwbinder,vndbinder"
 	---help---
 	  Default value for the binder.devices parameter.

@ -32,7 +32,7 @@ config ANDROID_BINDER_DEVICES
 	  therefore logically separated from the other devices.

 config ANDROID_BINDER_IPC_32BIT
-	bool
+	bool "Use old (Android 4.4 and earlier) 32-bit binder API"
 	depends on !64BIT && ANDROID_BINDER_IPC
 	default y
 	---help---
@ -44,6 +44,16 @@ config ANDROID_BINDER_IPC_32BIT

 	  Note that enabling this will break newer Android user-space.

+config ANDROID_BINDER_IPC_SELFTEST
+	bool "Android Binder IPC Driver Selftest"
+	depends on ANDROID_BINDER_IPC
+	---help---
+	  This feature allows binder selftest to run.
+
+	  Binder selftest checks the allocation and free of binder buffers
+	  exhaustively with combinations of various buffer sizes and
+	  alignments.
+
 endif # if ANDROID

 endmenu
--- a/drivers/android/Makefile
+++ b/drivers/android/Makefile
@ -1,3 +1,4 @@
 ccflags-y += -I$(src)			# needed for trace events

-obj-$(CONFIG_ANDROID_BINDER_IPC)	+= binder.o
+obj-$(CONFIG_ANDROID_BINDER_IPC)	+= binder.o binder_alloc.o
+obj-$(CONFIG_ANDROID_BINDER_IPC_SELFTEST) += binder_alloc_selftest.o
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
--- a/drivers/android/binder_alloc.c
+++ b/drivers/android/binder_alloc.c
--- a/drivers/android/binder_alloc.h
+++ b/drivers/android/binder_alloc.h
@ -0,0 +1,187 @@
+/*
+ * Copyright (C) 2017 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_BINDER_ALLOC_H
+#define _LINUX_BINDER_ALLOC_H
+
+#include <linux/rbtree.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/rtmutex.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/list_lru.h>
+
+extern struct list_lru binder_alloc_lru;
+struct binder_transaction;
+
+/**
+ * struct binder_buffer - buffer used for binder transactions
+ * @entry:              entry alloc->buffers
+ * @rb_node:            node for allocated_buffers/free_buffers rb trees
+ * @free:               true if buffer is free
+ * @allow_user_free:    describe the second member of struct blah,
+ * @async_transaction:  describe the second member of struct blah,
+ * @debug_id:           describe the second member of struct blah,
+ * @transaction:        describe the second member of struct blah,
+ * @target_node:        describe the second member of struct blah,
+ * @data_size:          describe the second member of struct blah,
+ * @offsets_size:       describe the second member of struct blah,
+ * @extra_buffers_size: describe the second member of struct blah,
+ * @data:i              describe the second member of struct blah,
+ *
+ * Bookkeeping structure for binder transaction buffers
+ */
+struct binder_buffer {
+	struct list_head entry; /* free and allocated entries by address */
+	struct rb_node rb_node; /* free entry by size or allocated entry */
+				/* by address */
+	unsigned free:1;
+	unsigned allow_user_free:1;
+	unsigned async_transaction:1;
+	unsigned free_in_progress:1;
+	unsigned debug_id:28;
+
+	struct binder_transaction *transaction;
+
+	struct binder_node *target_node;
+	size_t data_size;
+	size_t offsets_size;
+	size_t extra_buffers_size;
+	void *data;
+};
+
+/**
+ * struct binder_lru_page - page object used for binder shrinker
+ * @page_ptr: pointer to physical page in mmap'd space
+ * @lru:      entry in binder_alloc_lru
+ * @alloc:    binder_alloc for a proc
+ */
+struct binder_lru_page {
+	struct list_head lru;
+	struct page *page_ptr;
+	struct binder_alloc *alloc;
+};
+
+/**
+ * struct binder_alloc - per-binder proc state for binder allocator
+ * @vma:                vm_area_struct passed to mmap_handler
+ *                      (invarient after mmap)
+ * @tsk:                tid for task that called init for this proc
+ *                      (invariant after init)
+ * @vma_vm_mm:          copy of vma->vm_mm (invarient after mmap)
+ * @buffer:             base of per-proc address space mapped via mmap
+ * @user_buffer_offset: offset between user and kernel VAs for buffer
+ * @buffers:            list of all buffers for this proc
+ * @free_buffers:       rb tree of buffers available for allocation
+ *                      sorted by size
+ * @allocated_buffers:  rb tree of allocated buffers sorted by address
+ * @free_async_space:   VA space available for async buffers. This is
+ *                      initialized at mmap time to 1/2 the full VA space
+ * @pages:              array of binder_lru_page
+ * @buffer_size:        size of address space specified via mmap
+ * @pid:                pid for associated binder_proc (invariant after init)
+ *
+ * Bookkeeping structure for per-proc address space management for binder
+ * buffers. It is normally initialized during binder_init() and binder_mmap()
+ * calls. The address space is used for both user-visible buffers and for
+ * struct binder_buffer objects used to track the user buffers
+ */
+struct binder_alloc {
+	struct mutex mutex;
+	struct task_struct *tsk;
+	struct vm_area_struct *vma;
+	struct mm_struct *vma_vm_mm;
+	void *buffer;
+	ptrdiff_t user_buffer_offset;
+	struct list_head buffers;
+	struct rb_root free_buffers;
+	struct rb_root allocated_buffers;
+	size_t free_async_space;
+	struct binder_lru_page *pages;
+	size_t buffer_size;
+	uint32_t buffer_free;
+	int pid;
+};
+
+#ifdef CONFIG_ANDROID_BINDER_IPC_SELFTEST
+void binder_selftest_alloc(struct binder_alloc *alloc);
+#else
+static inline void binder_selftest_alloc(struct binder_alloc *alloc) {}
+#endif
+enum lru_status binder_alloc_free_page(struct list_head *item,
+				       struct list_lru_one *lru,
+				       spinlock_t *lock, void *cb_arg);
+extern struct binder_buffer *binder_alloc_new_buf(struct binder_alloc *alloc,
+						  size_t data_size,
+						  size_t offsets_size,
+						  size_t extra_buffers_size,
+						  int is_async);
+extern void binder_alloc_init(struct binder_alloc *alloc);
+void binder_alloc_shrinker_init(void);
+extern void binder_alloc_vma_close(struct binder_alloc *alloc);
+extern struct binder_buffer *
+binder_alloc_prepare_to_free(struct binder_alloc *alloc,
+			     uintptr_t user_ptr);
+extern void binder_alloc_free_buf(struct binder_alloc *alloc,
+				  struct binder_buffer *buffer);
+extern int binder_alloc_mmap_handler(struct binder_alloc *alloc,
+				     struct vm_area_struct *vma);
+extern void binder_alloc_deferred_release(struct binder_alloc *alloc);
+extern int binder_alloc_get_allocated_count(struct binder_alloc *alloc);
+extern void binder_alloc_print_allocated(struct seq_file *m,
+					 struct binder_alloc *alloc);
+void binder_alloc_print_pages(struct seq_file *m,
+			      struct binder_alloc *alloc);
+
+/**
+ * binder_alloc_get_free_async_space() - get free space available for async
+ * @alloc:	binder_alloc for this proc
+ *
+ * Return:	the bytes remaining in the address-space for async transactions
+ */
+static inline size_t
+binder_alloc_get_free_async_space(struct binder_alloc *alloc)
+{
+	size_t free_async_space;
+
+	mutex_lock(&alloc->mutex);
+	free_async_space = alloc->free_async_space;
+	mutex_unlock(&alloc->mutex);
+	return free_async_space;
+}
+
+/**
+ * binder_alloc_get_user_buffer_offset() - get offset between kernel/user addrs
+ * @alloc:	binder_alloc for this proc
+ *
+ * Return:	the offset between kernel and user-space addresses to use for
+ * virtual address conversion
+ */
+static inline ptrdiff_t
+binder_alloc_get_user_buffer_offset(struct binder_alloc *alloc)
+{
+	/*
+	 * user_buffer_offset is constant if vma is set and
+	 * undefined if vma is not set. It is possible to
+	 * get here with !alloc->vma if the target process
+	 * is dying while a transaction is being initiated.
+	 * Returning the old value is ok in this case and
+	 * the transaction will fail.
+	 */
+	return alloc->user_buffer_offset;
+}
+
+#endif /* _LINUX_BINDER_ALLOC_H */
+
--- a/drivers/android/binder_alloc_selftest.c
+++ b/drivers/android/binder_alloc_selftest.c
@ -0,0 +1,310 @@
+/* binder_alloc_selftest.c
+ *
+ * Android IPC Subsystem
+ *
+ * Copyright (C) 2017 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/mm_types.h>
+#include <linux/err.h>
+#include "binder_alloc.h"
+
+#define BUFFER_NUM 5
+#define BUFFER_MIN_SIZE (PAGE_SIZE / 8)
+
+static bool binder_selftest_run = true;
+static int binder_selftest_failures;
+static DEFINE_MUTEX(binder_selftest_lock);
+
+/**
+ * enum buf_end_align_type - Page alignment of a buffer
+ * end with regard to the end of the previous buffer.
+ *
+ * In the pictures below, buf2 refers to the buffer we
+ * are aligning. buf1 refers to previous buffer by addr.
+ * Symbol [ means the start of a buffer, ] means the end
+ * of a buffer, and | means page boundaries.
+ */
+enum buf_end_align_type {
+	/**
+	 * @SAME_PAGE_UNALIGNED: The end of this buffer is on
+	 * the same page as the end of the previous buffer and
+	 * is not page aligned. Examples:
+	 * buf1 ][ buf2 ][ ...
+	 * buf1 ]|[ buf2 ][ ...
+	 */
+	SAME_PAGE_UNALIGNED = 0,
+	/**
+	 * @SAME_PAGE_ALIGNED: When the end of the previous buffer
+	 * is not page aligned, the end of this buffer is on the
+	 * same page as the end of the previous buffer and is page
+	 * aligned. When the previous buffer is page aligned, the
+	 * end of this buffer is aligned to the next page boundary.
+	 * Examples:
+	 * buf1 ][ buf2 ]| ...
+	 * buf1 ]|[ buf2 ]| ...
+	 */
+	SAME_PAGE_ALIGNED,
+	/**
+	 * @NEXT_PAGE_UNALIGNED: The end of this buffer is on
+	 * the page next to the end of the previous buffer and
+	 * is not page aligned. Examples:
+	 * buf1 ][ buf2 | buf2 ][ ...
+	 * buf1 ]|[ buf2 | buf2 ][ ...
+	 */
+	NEXT_PAGE_UNALIGNED,
+	/**
+	 * @NEXT_PAGE_ALIGNED: The end of this buffer is on
+	 * the page next to the end of the previous buffer and
+	 * is page aligned. Examples:
+	 * buf1 ][ buf2 | buf2 ]| ...
+	 * buf1 ]|[ buf2 | buf2 ]| ...
+	 */
+	NEXT_PAGE_ALIGNED,
+	/**
+	 * @NEXT_NEXT_UNALIGNED: The end of this buffer is on
+	 * the page that follows the page after the end of the
+	 * previous buffer and is not page aligned. Examples:
+	 * buf1 ][ buf2 | buf2 | buf2 ][ ...
+	 * buf1 ]|[ buf2 | buf2 | buf2 ][ ...
+	 */
+	NEXT_NEXT_UNALIGNED,
+	LOOP_END,
+};
+
+static void pr_err_size_seq(size_t *sizes, int *seq)
+{
+	int i;
+
+	pr_err("alloc sizes: ");
+	for (i = 0; i < BUFFER_NUM; i++)
+		pr_cont("[%zu]", sizes[i]);
+	pr_cont("\n");
+	pr_err("free seq: ");
+	for (i = 0; i < BUFFER_NUM; i++)
+		pr_cont("[%d]", seq[i]);
+	pr_cont("\n");
+}
+
+static bool check_buffer_pages_allocated(struct binder_alloc *alloc,
+					 struct binder_buffer *buffer,
+					 size_t size)
+{
+	void *page_addr, *end;
+	int page_index;
+
+	end = (void *)PAGE_ALIGN((uintptr_t)buffer->data + size);
+	page_addr = buffer->data;
+	for (; page_addr < end; page_addr += PAGE_SIZE) {
+		page_index = (page_addr - alloc->buffer) / PAGE_SIZE;
+		if (!alloc->pages[page_index].page_ptr ||
+		    !list_empty(&alloc->pages[page_index].lru)) {
+			pr_err("expect alloc but is %s at page index %d\n",
+			       alloc->pages[page_index].page_ptr ?
+			       "lru" : "free", page_index);
+			return false;
+		}
+	}
+	return true;
+}
+
+static void binder_selftest_alloc_buf(struct binder_alloc *alloc,
+				      struct binder_buffer *buffers[],
+				      size_t *sizes, int *seq)
+{
+	int i;
+
+	for (i = 0; i < BUFFER_NUM; i++) {
+		buffers[i] = binder_alloc_new_buf(alloc, sizes[i], 0, 0, 0);
+		if (IS_ERR(buffers[i]) ||
+		    !check_buffer_pages_allocated(alloc, buffers[i],
+						  sizes[i])) {
+			pr_err_size_seq(sizes, seq);
+			binder_selftest_failures++;
+		}
+	}
+}
+
+static void binder_selftest_free_buf(struct binder_alloc *alloc,
+				     struct binder_buffer *buffers[],
+				     size_t *sizes, int *seq, size_t end)
+{
+	int i;
+
+	for (i = 0; i < BUFFER_NUM; i++)
+		binder_alloc_free_buf(alloc, buffers[seq[i]]);
+
+	for (i = 0; i < end / PAGE_SIZE; i++) {
+		/**
+		 * Error message on a free page can be false positive
+		 * if binder shrinker ran during binder_alloc_free_buf
+		 * calls above.
+		 */
+		if (list_empty(&alloc->pages[i].lru)) {
+			pr_err_size_seq(sizes, seq);
+			pr_err("expect lru but is %s at page index %d\n",
+			       alloc->pages[i].page_ptr ? "alloc" : "free", i);
+			binder_selftest_failures++;
+		}
+	}
+}
+
+static void binder_selftest_free_page(struct binder_alloc *alloc)
+{
+	int i;
+	unsigned long count;
+
+	while ((count = list_lru_count(&binder_alloc_lru))) {
+		list_lru_walk(&binder_alloc_lru, binder_alloc_free_page,
+			      NULL, count);
+	}
+
+	for (i = 0; i < (alloc->buffer_size / PAGE_SIZE); i++) {
+		if (alloc->pages[i].page_ptr) {
+			pr_err("expect free but is %s at page index %d\n",
+			       list_empty(&alloc->pages[i].lru) ?
+			       "alloc" : "lru", i);
+			binder_selftest_failures++;
+		}
+	}
+}
+
+static void binder_selftest_alloc_free(struct binder_alloc *alloc,
+				       size_t *sizes, int *seq, size_t end)
+{
+	struct binder_buffer *buffers[BUFFER_NUM];
+
+	binder_selftest_alloc_buf(alloc, buffers, sizes, seq);
+	binder_selftest_free_buf(alloc, buffers, sizes, seq, end);
+
+	/* Allocate from lru. */
+	binder_selftest_alloc_buf(alloc, buffers, sizes, seq);
+	if (list_lru_count(&binder_alloc_lru))
+		pr_err("lru list should be empty but is not\n");
+
+	binder_selftest_free_buf(alloc, buffers, sizes, seq, end);
+	binder_selftest_free_page(alloc);
+}
+
+static bool is_dup(int *seq, int index, int val)
+{
+	int i;
+
+	for (i = 0; i < index; i++) {
+		if (seq[i] == val)
+			return true;
+	}
+	return false;
+}
+
+/* Generate BUFFER_NUM factorial free orders. */
+static void binder_selftest_free_seq(struct binder_alloc *alloc,
+				     size_t *sizes, int *seq,
+				     int index, size_t end)
+{
+	int i;
+
+	if (index == BUFFER_NUM) {
+		binder_selftest_alloc_free(alloc, sizes, seq, end);
+		return;
+	}
+	for (i = 0; i < BUFFER_NUM; i++) {
+		if (is_dup(seq, index, i))
+			continue;
+		seq[index] = i;
+		binder_selftest_free_seq(alloc, sizes, seq, index + 1, end);
+	}
+}
+
+static void binder_selftest_alloc_size(struct binder_alloc *alloc,
+				       size_t *end_offset)
+{
+	int i;
+	int seq[BUFFER_NUM] = {0};
+	size_t front_sizes[BUFFER_NUM];
+	size_t back_sizes[BUFFER_NUM];
+	size_t last_offset, offset = 0;
+
+	for (i = 0; i < BUFFER_NUM; i++) {
+		last_offset = offset;
+		offset = end_offset[i];
+		front_sizes[i] = offset - last_offset;
+		back_sizes[BUFFER_NUM - i - 1] = front_sizes[i];
+	}
+	/*
+	 * Buffers share the first or last few pages.
+	 * Only BUFFER_NUM - 1 buffer sizes are adjustable since
+	 * we need one giant buffer before getting to the last page.
+	 */
+	back_sizes[0] += alloc->buffer_size - end_offset[BUFFER_NUM - 1];
+	binder_selftest_free_seq(alloc, front_sizes, seq, 0,
+				 end_offset[BUFFER_NUM - 1]);
+	binder_selftest_free_seq(alloc, back_sizes, seq, 0, alloc->buffer_size);
+}
+
+static void binder_selftest_alloc_offset(struct binder_alloc *alloc,
+					 size_t *end_offset, int index)
+{
+	int align;
+	size_t end, prev;
+
+	if (index == BUFFER_NUM) {
+		binder_selftest_alloc_size(alloc, end_offset);
+		return;
+	}
+	prev = index == 0 ? 0 : end_offset[index - 1];
+	end = prev;
+
+	BUILD_BUG_ON(BUFFER_MIN_SIZE * BUFFER_NUM >= PAGE_SIZE);
+
+	for (align = SAME_PAGE_UNALIGNED; align < LOOP_END; align++) {
+		if (align % 2)
+			end = ALIGN(end, PAGE_SIZE);
+		else
+			end += BUFFER_MIN_SIZE;
+		end_offset[index] = end;
+		binder_selftest_alloc_offset(alloc, end_offset, index + 1);
+	}
+}
+
+/**
+ * binder_selftest_alloc() - Test alloc and free of buffer pages.
+ * @alloc: Pointer to alloc struct.
+ *
+ * Allocate BUFFER_NUM buffers to cover all page alignment cases,
+ * then free them in all orders possible. Check that pages are
+ * correctly allocated, put onto lru when buffers are freed, and
+ * are freed when binder_alloc_free_page is called.
+ */
+void binder_selftest_alloc(struct binder_alloc *alloc)
+{
+	size_t end_offset[BUFFER_NUM];
+
+	if (!binder_selftest_run)
+		return;
+	mutex_lock(&binder_selftest_lock);
+	if (!binder_selftest_run || !alloc->vma)
+		goto done;
+	pr_info("STARTED\n");
+	binder_selftest_alloc_offset(alloc, end_offset, 0);
+	binder_selftest_run = false;
+	if (binder_selftest_failures > 0)
+		pr_info("%d tests FAILED\n", binder_selftest_failures);
+	else
+		pr_info("PASSED\n");
+
+done:
+	mutex_unlock(&binder_selftest_lock);
+}
--- a/drivers/android/binder_trace.h
+++ b/drivers/android/binder_trace.h
@ -23,7 +23,8 @@
 struct binder_buffer;
 struct binder_node;
 struct binder_proc;
-struct binder_ref;
+struct binder_alloc;
+struct binder_ref_data;
 struct binder_thread;
 struct binder_transaction;

@ -146,8 +147,8 @@ TRACE_EVENT(binder_transaction_received,

 TRACE_EVENT(binder_transaction_node_to_ref,
 	TP_PROTO(struct binder_transaction *t, struct binder_node *node,
-		 struct binder_ref *ref),
-	TP_ARGS(t, node, ref),
+		 struct binder_ref_data *rdata),
+	TP_ARGS(t, node, rdata),

 	TP_STRUCT__entry(
 		__field(int, debug_id)
@ -160,8 +161,8 @@ TRACE_EVENT(binder_transaction_node_to_ref,
 		__entry->debug_id = t->debug_id;
 		__entry->node_debug_id = node->debug_id;
 		__entry->node_ptr = node->ptr;
-		__entry->ref_debug_id = ref->debug_id;
-		__entry->ref_desc = ref->desc;
+		__entry->ref_debug_id = rdata->debug_id;
+		__entry->ref_desc = rdata->desc;
 	),
 	TP_printk("transaction=%d node=%d src_ptr=0x%016llx ==> dest_ref=%d dest_desc=%d",
 		  __entry->debug_id, __entry->node_debug_id,
@ -170,8 +171,9 @@ TRACE_EVENT(binder_transaction_node_to_ref,
 );

 TRACE_EVENT(binder_transaction_ref_to_node,
-	TP_PROTO(struct binder_transaction *t, struct binder_ref *ref),
-	TP_ARGS(t, ref),
+	TP_PROTO(struct binder_transaction *t, struct binder_node *node,
+		 struct binder_ref_data *rdata),
+	TP_ARGS(t, node, rdata),

 	TP_STRUCT__entry(
 		__field(int, debug_id)
@ -182,10 +184,10 @@ TRACE_EVENT(binder_transaction_ref_to_node,
 	),
 	TP_fast_assign(
 		__entry->debug_id = t->debug_id;
-		__entry->ref_debug_id = ref->debug_id;
-		__entry->ref_desc = ref->desc;
-		__entry->node_debug_id = ref->node->debug_id;
-		__entry->node_ptr = ref->node->ptr;
+		__entry->ref_debug_id = rdata->debug_id;
+		__entry->ref_desc = rdata->desc;
+		__entry->node_debug_id = node->debug_id;
+		__entry->node_ptr = node->ptr;
 	),
 	TP_printk("transaction=%d node=%d src_ref=%d src_desc=%d ==> dest_ptr=0x%016llx",
 		  __entry->debug_id, __entry->node_debug_id,
@ -194,9 +196,10 @@ TRACE_EVENT(binder_transaction_ref_to_node,
 );

 TRACE_EVENT(binder_transaction_ref_to_ref,
-	TP_PROTO(struct binder_transaction *t, struct binder_ref *src_ref,
-		 struct binder_ref *dest_ref),
-	TP_ARGS(t, src_ref, dest_ref),
+	TP_PROTO(struct binder_transaction *t, struct binder_node *node,
+		 struct binder_ref_data *src_ref,
+		 struct binder_ref_data *dest_ref),
+	TP_ARGS(t, node, src_ref, dest_ref),

 	TP_STRUCT__entry(
 		__field(int, debug_id)
@ -208,7 +211,7 @@ TRACE_EVENT(binder_transaction_ref_to_ref,
 	),
 	TP_fast_assign(
 		__entry->debug_id = t->debug_id;
-		__entry->node_debug_id = src_ref->node->debug_id;
+		__entry->node_debug_id = node->debug_id;
 		__entry->src_ref_debug_id = src_ref->debug_id;
 		__entry->src_ref_desc = src_ref->desc;
 		__entry->dest_ref_debug_id = dest_ref->debug_id;
@ -268,9 +271,9 @@ DEFINE_EVENT(binder_buffer_class, binder_transaction_failed_buffer_release,
 	TP_ARGS(buffer));

 TRACE_EVENT(binder_update_page_range,
-	TP_PROTO(struct binder_proc *proc, bool allocate,
+	TP_PROTO(struct binder_alloc *alloc, bool allocate,
 		 void *start, void *end),
-	TP_ARGS(proc, allocate, start, end),
+	TP_ARGS(alloc, allocate, start, end),
 	TP_STRUCT__entry(
 		__field(int, proc)
 		__field(bool, allocate)
@ -278,9 +281,9 @@ TRACE_EVENT(binder_update_page_range,
 		__field(size_t, size)
 	),
 	TP_fast_assign(
-		__entry->proc = proc->pid;
+		__entry->proc = alloc->pid;
 		__entry->allocate = allocate;
-		__entry->offset = start - proc->buffer;
+		__entry->offset = start - alloc->buffer;
 		__entry->size = end - start;
 	),
 	TP_printk("proc=%d allocate=%d offset=%zu size=%zu",
@ -288,6 +291,61 @@ TRACE_EVENT(binder_update_page_range,
 		  __entry->offset, __entry->size)
 );

+DECLARE_EVENT_CLASS(binder_lru_page_class,
+	TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
+	TP_ARGS(alloc, page_index),
+	TP_STRUCT__entry(
+		__field(int, proc)
+		__field(size_t, page_index)
+	),
+	TP_fast_assign(
+		__entry->proc = alloc->pid;
+		__entry->page_index = page_index;
+	),
+	TP_printk("proc=%d page_index=%zu",
+		  __entry->proc, __entry->page_index)
+);
+
+DEFINE_EVENT(binder_lru_page_class, binder_alloc_lru_start,
+	TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
+	TP_ARGS(alloc, page_index));
+
+DEFINE_EVENT(binder_lru_page_class, binder_alloc_lru_end,
+	TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
+	TP_ARGS(alloc, page_index));
+
+DEFINE_EVENT(binder_lru_page_class, binder_free_lru_start,
+	TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
+	TP_ARGS(alloc, page_index));
+
+DEFINE_EVENT(binder_lru_page_class, binder_free_lru_end,
+	TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
+	TP_ARGS(alloc, page_index));
+
+DEFINE_EVENT(binder_lru_page_class, binder_alloc_page_start,
+	TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
+	TP_ARGS(alloc, page_index));
+
+DEFINE_EVENT(binder_lru_page_class, binder_alloc_page_end,
+	TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
+	TP_ARGS(alloc, page_index));
+
+DEFINE_EVENT(binder_lru_page_class, binder_unmap_user_start,
+	TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
+	TP_ARGS(alloc, page_index));
+
+DEFINE_EVENT(binder_lru_page_class, binder_unmap_user_end,
+	TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
+	TP_ARGS(alloc, page_index));
+
+DEFINE_EVENT(binder_lru_page_class, binder_unmap_kernel_start,
+	TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
+	TP_ARGS(alloc, page_index));
+
+DEFINE_EVENT(binder_lru_page_class, binder_unmap_kernel_end,
+	TP_PROTO(const struct binder_alloc *alloc, size_t page_index),
+	TP_ARGS(alloc, page_index));
+
 TRACE_EVENT(binder_command,
 	TP_PROTO(uint32_t cmd),
 	TP_ARGS(cmd),
--- a/drivers/auxdisplay/panel.c
+++ b/drivers/auxdisplay/panel.c
@ -877,21 +877,21 @@ static void lcd_clear_fast_tilcd(struct charlcd *charlcd)
 	spin_unlock_irq(&pprt_lock);
 }

-static struct charlcd_ops charlcd_serial_ops = {
+static const struct charlcd_ops charlcd_serial_ops = {
 	.write_cmd	= lcd_write_cmd_s,
 	.write_data	= lcd_write_data_s,
 	.clear_fast	= lcd_clear_fast_s,
 	.backlight	= lcd_backlight,
 };

-static struct charlcd_ops charlcd_parallel_ops = {
+static const struct charlcd_ops charlcd_parallel_ops = {
 	.write_cmd	= lcd_write_cmd_p8,
 	.write_data	= lcd_write_data_p8,
 	.clear_fast	= lcd_clear_fast_p8,
 	.backlight	= lcd_backlight,
 };

-static struct charlcd_ops charlcd_tilcd_ops = {
+static const struct charlcd_ops charlcd_tilcd_ops = {
 	.write_cmd	= lcd_write_cmd_tilcd,
 	.write_data	= lcd_write_data_tilcd,
 	.clear_fast	= lcd_clear_fast_tilcd,
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@ -67,7 +67,7 @@ static char *applicom_pci_devnames[] = {
 	"PCI2000PFB"
 };

-static struct pci_device_id applicom_pci_tbl[] = {
+static const struct pci_device_id applicom_pci_tbl[] = {
 	{ PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCIGENERIC) },
 	{ PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN) },
 	{ PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000PFB) },
--- a/drivers/char/mwave/smapi.c
+++ b/drivers/char/mwave/smapi.c
@ -128,10 +128,11 @@ int smapi_query_DSP_cfg(SMAPI_DSP_SETTINGS * pSettings)
 {
 	int bRC = -EIO;
 	unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
-	unsigned short ausDspBases[] = { 0x0030, 0x4E30, 0x8E30, 0xCE30, 0x0130, 0x0350, 0x0070, 0x0DB0 };
-	unsigned short ausUartBases[] = { 0x03F8, 0x02F8, 0x03E8, 0x02E8 };
-	unsigned short numDspBases = 8;
-	unsigned short numUartBases = 4;
+	static const unsigned short ausDspBases[] = {
+		0x0030, 0x4E30, 0x8E30, 0xCE30,
+		0x0130, 0x0350, 0x0070, 0x0DB0 };
+	static const unsigned short ausUartBases[] = {
+		0x03F8, 0x02F8, 0x03E8, 0x02E8 };

 	PRINTK_1(TRACE_SMAPI, "smapi::smapi_query_DSP_cfg entry\n");

@ -148,7 +149,7 @@ int smapi_query_DSP_cfg(SMAPI_DSP_SETTINGS * pSettings)
 	pSettings->bDSPEnabled = ((usCX & 0x0001) != 0);
 	pSettings->usDspIRQ = usSI & 0x00FF;
 	pSettings->usDspDMA = (usSI & 0xFF00) >> 8;
-	if ((usDI & 0x00FF) < numDspBases) {
+	if ((usDI & 0x00FF) < ARRAY_SIZE(ausDspBases)) {
 		pSettings->usDspBaseIO = ausDspBases[usDI & 0x00FF];
 	} else {
 		pSettings->usDspBaseIO = 0;
@ -176,7 +177,7 @@ int smapi_query_DSP_cfg(SMAPI_DSP_SETTINGS * pSettings)

 	pSettings->bModemEnabled = ((usCX & 0x0001) != 0);
 	pSettings->usUartIRQ = usSI & 0x000F;
-	if (((usSI & 0xFF00) >> 8) < numUartBases) {
+	if (((usSI & 0xFF00) >> 8) < ARRAY_SIZE(ausUartBases)) {
 		pSettings->usUartBaseIO = ausUartBases[(usSI & 0xFF00) >> 8];
 	} else {
 		pSettings->usUartBaseIO = 0;
@ -205,15 +206,16 @@ int smapi_set_DSP_cfg(void)
 	int bRC = -EIO;
 	int i;
 	unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
-	unsigned short ausDspBases[] = { 0x0030, 0x4E30, 0x8E30, 0xCE30, 0x0130, 0x0350, 0x0070, 0x0DB0 };
-	unsigned short ausUartBases[] = { 0x03F8, 0x02F8, 0x03E8, 0x02E8 };
-	unsigned short ausDspIrqs[] = { 5, 7, 10, 11, 15 };
-	unsigned short ausUartIrqs[] = { 3, 4 };
+	static const unsigned short ausDspBases[] = {
+		0x0030, 0x4E30, 0x8E30, 0xCE30,
+		0x0130, 0x0350, 0x0070, 0x0DB0 };
+	static const unsigned short ausUartBases[] = {
+		0x03F8, 0x02F8, 0x03E8, 0x02E8 };
+	static const unsigned short ausDspIrqs[] = {
+		5, 7, 10, 11, 15 };
+	static const unsigned short ausUartIrqs[] = {
+		3, 4 };

-	unsigned short numDspBases = 8;
-	unsigned short numUartBases = 4;
-	unsigned short numDspIrqs = 5;
-	unsigned short numUartIrqs = 2;
 	unsigned short dspio_index = 0, uartio_index = 0;

 	PRINTK_5(TRACE_SMAPI,
@ -221,11 +223,11 @@ int smapi_set_DSP_cfg(void)
 		mwave_3780i_irq, mwave_3780i_io, mwave_uart_irq, mwave_uart_io);

 	if (mwave_3780i_io) {
-		for (i = 0; i < numDspBases; i++) {
+		for (i = 0; i < ARRAY_SIZE(ausDspBases); i++) {
 			if (mwave_3780i_io == ausDspBases[i])
 				break;
 		}
-		if (i == numDspBases) {
+		if (i == ARRAY_SIZE(ausDspBases)) {
 			PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_3780i_io address %x. Aborting.\n", mwave_3780i_io);
 			return bRC;
 		}
@ -233,22 +235,22 @@ int smapi_set_DSP_cfg(void)
 	}

 	if (mwave_3780i_irq) {
-		for (i = 0; i < numDspIrqs; i++) {
+		for (i = 0; i < ARRAY_SIZE(ausDspIrqs); i++) {
 			if (mwave_3780i_irq == ausDspIrqs[i])
 				break;
 		}
-		if (i == numDspIrqs) {
+		if (i == ARRAY_SIZE(ausDspIrqs)) {
 			PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_3780i_irq %x. Aborting.\n", mwave_3780i_irq);
 			return bRC;
 		}
 	}

 	if (mwave_uart_io) {
-		for (i = 0; i < numUartBases; i++) {
+		for (i = 0; i < ARRAY_SIZE(ausUartBases); i++) {
 			if (mwave_uart_io == ausUartBases[i])
 				break;
 		}
-		if (i == numUartBases) {
+		if (i == ARRAY_SIZE(ausUartBases)) {
 			PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_uart_io address %x. Aborting.\n", mwave_uart_io);
 			return bRC;
 		}
@ -257,11 +259,11 @@ int smapi_set_DSP_cfg(void)


 	if (mwave_uart_irq) {
-		for (i = 0; i < numUartIrqs; i++) {
+		for (i = 0; i < ARRAY_SIZE(ausUartIrqs); i++) {
 			if (mwave_uart_irq == ausUartIrqs[i])
 				break;
 		}
-		if (i == numUartIrqs) {
+		if (i == ARRAY_SIZE(ausUartIrqs)) {
 			PRINTK_ERROR(KERN_ERR_MWAVE "smapi::smapi_set_DSP_cfg: Error: Invalid mwave_uart_irq %x. Aborting.\n", mwave_uart_irq);
 			return bRC;
 		}
--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@ -101,9 +101,6 @@ static DEFINE_IDA(ida_index);
 #define PP_BUFFER_SIZE 1024
 #define PARDEVICE_MAX 8

-/* ROUND_UP macro from fs/select.c */
-#define ROUND_UP(x,y) (((x)+(y)-1)/(y))
-
 static DEFINE_MUTEX(pp_do_mutex);

 /* define fixed sized ioctl cmd for y2038 migration */
--- a/drivers/char/tlclk.c
+++ b/drivers/char/tlclk.c
@ -766,7 +766,7 @@ static struct attribute *tlclk_sysfs_entries[] = {
 	NULL
 };

-static struct attribute_group tlclk_attribute_group = {
+static const struct attribute_group tlclk_attribute_group = {
 	.name = NULL,		/* put in device directory */
 	.attrs = tlclk_sysfs_entries,
 };
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@ -1308,7 +1308,7 @@ static struct attribute *port_sysfs_entries[] = {
 	NULL
 };

-static struct attribute_group port_attribute_group = {
+static const struct attribute_group port_attribute_group = {
 	.name = NULL,		/* put in device directory */
 	.attrs = port_sysfs_entries,
 };
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@ -86,8 +86,7 @@
 #include <linux/cdev.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/uaccess.h>

 #ifdef CONFIG_OF
@ -222,6 +221,8 @@ static const struct config_registers v6_config_registers = {
 * hwicap_command_desync - Send a DESYNC command to the ICAP port.
 * @drvdata: a pointer to the drvdata.
 *
+ * Returns: '0' on success and failure value on error
+ *
 * This command desynchronizes the ICAP After this command, a
 * bitstream containing a NULL packet, followed by a SYNCH packet is
 * required before the ICAP will recognize commands.
@ -251,10 +252,12 @@ static int hwicap_command_desync(struct hwicap_drvdata *drvdata)
 * hwicap_get_configuration_register - Query a configuration register.
 * @drvdata: a pointer to the drvdata.
 * @reg: a constant which represents the configuration
- *		register value to be returned.
- * 		Examples:  XHI_IDCODE, XHI_FLR.
+ * register value to be returned.
+ * Examples: XHI_IDCODE, XHI_FLR.
 * @reg_data: returns the value of the register.
 *
+ * Returns: '0' on success and failure value on error
+ *
 * Sends a query packet to the ICAP and then receives the response.
 * The icap is left in Synched state.
 */
@ -320,7 +323,8 @@ static int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata)
 	dev_dbg(drvdata->dev, "initializing\n");

 	/* Abort any current transaction, to make sure we have the
-	 * ICAP in a good state. */
+	 * ICAP in a good state.
+	 */
 	dev_dbg(drvdata->dev, "Reset...\n");
 	drvdata->config->reset(drvdata);

@ -632,7 +636,6 @@ static int hwicap_setup(struct device *dev, int id,

 	drvdata = kzalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
 	if (!drvdata) {
-		dev_err(dev, "Couldn't allocate device private record\n");
 		retval = -ENOMEM;
 		goto failed0;
 	}
@ -759,20 +762,20 @@ static int hwicap_of_probe(struct platform_device *op,
 	id = of_get_property(op->dev.of_node, "port-number", NULL);

 	/* It's most likely that we're using V4, if the family is not
-	   specified */
+	 * specified
+	 */
 	regs = &v4_config_registers;
 	family = of_get_property(op->dev.of_node, "xlnx,family", NULL);

 	if (family) {
-		if (!strcmp(family, "virtex2p")) {
+		if (!strcmp(family, "virtex2p"))
 			regs = &v2_config_registers;
-		} else if (!strcmp(family, "virtex4")) {
+		else if (!strcmp(family, "virtex4"))
 			regs = &v4_config_registers;
-		} else if (!strcmp(family, "virtex5")) {
+		else if (!strcmp(family, "virtex5"))
 			regs = &v5_config_registers;
-		} else if (!strcmp(family, "virtex6")) {
+		else if (!strcmp(family, "virtex6"))
 			regs = &v6_config_registers;
-		}
 	}
 	return hwicap_setup(&op->dev, id ? *id : -1, &res, config,
 			regs);
@ -802,20 +805,20 @@ static int hwicap_drv_probe(struct platform_device *pdev)
 		return -ENODEV;

 	/* It's most likely that we're using V4, if the family is not
-	   specified */
+	 * specified
+	 */
 	regs = &v4_config_registers;
 	family = pdev->dev.platform_data;

 	if (family) {
-		if (!strcmp(family, "virtex2p")) {
+		if (!strcmp(family, "virtex2p"))
 			regs = &v2_config_registers;
-		} else if (!strcmp(family, "virtex4")) {
+		else if (!strcmp(family, "virtex4"))
 			regs = &v4_config_registers;
-		} else if (!strcmp(family, "virtex5")) {
+		else if (!strcmp(family, "virtex5"))
 			regs = &v5_config_registers;
-		} else if (!strcmp(family, "virtex6")) {
+		else if (!strcmp(family, "virtex6"))
 			regs = &v6_config_registers;
-		}
 	}

 	return hwicap_setup(&pdev->dev, pdev->id, res,
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@ -62,11 +62,13 @@ struct hwicap_drvdata {

 struct hwicap_driver_config {
 	/* Read configuration data given by size into the data buffer.
-	   Return 0 if successful. */
+	 * Return 0 if successful.
+	 */
 	int (*get_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
 			u32 size);
 	/* Write configuration data given by size from the data buffer.
-	   Return 0 if successful. */
+	 * Return 0 if successful.
+	 */
 	int (*set_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
 			u32 size);
 	/* Get the status register, bit pattern given by:
@ -193,11 +195,12 @@ struct config_registers {
 * hwicap_type_1_read - Generates a Type 1 read packet header.
 * @reg: is the address of the register to be read back.
 *
+ * Return:
 * Generates a Type 1 read packet header, which is used to indirectly
 * read registers in the configuration logic.  This packet must then
 * be sent through the icap device, and a return packet received with
 * the information.
- **/
+ */
 static inline u32 hwicap_type_1_read(u32 reg)
 {
 	return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
@ -208,7 +211,9 @@ static inline u32 hwicap_type_1_read(u32 reg)
 /**
 * hwicap_type_1_write - Generates a Type 1 write packet header
 * @reg: is the address of the register to be read back.
- **/
+ *
+ * Return: Type 1 write packet header
+ */
 static inline u32 hwicap_type_1_write(u32 reg)
 {
 	return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@ -150,4 +150,11 @@ config EXTCON_USB_GPIO
 	  Say Y here to enable GPIO based USB cable detection extcon support.
 	  Used typically if GPIO is used for USB ID pin detection.

+config EXTCON_USBC_CROS_EC
+	tristate "ChromeOS Embedded Controller EXTCON support"
+	depends on MFD_CROS_EC
+	help
+	  Say Y here to enable USB Type C cable detection extcon support when
+	  using Chrome OS EC based USB Type-C ports.
+
 endif
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@ -20,3 +20,4 @@ obj-$(CONFIG_EXTCON_QCOM_SPMI_MISC) += extcon-qcom-spmi-misc.o
 obj-$(CONFIG_EXTCON_RT8973A)	+= extcon-rt8973a.o
 obj-$(CONFIG_EXTCON_SM5502)	+= extcon-sm5502.o
 obj-$(CONFIG_EXTCON_USB_GPIO)	+= extcon-usb-gpio.o
+obj-$(CONFIG_EXTCON_USBC_CROS_EC) += extcon-usbc-cros-ec.o
--- a/drivers/extcon/devres.c
+++ b/drivers/extcon/devres.c
@ -1,5 +1,5 @@
 /*
- *  drivers/extcon/devres.c - EXTCON device's resource management
+ * drivers/extcon/devres.c - EXTCON device's resource management
 *
 * Copyright (C) 2016 Samsung Electronics
 * Author: Chanwoo Choi <cw00.choi@samsung.com>
@ -59,10 +59,9 @@ static void devm_extcon_dev_notifier_all_unreg(struct device *dev, void *res)

 /**
 * devm_extcon_dev_allocate - Allocate managed extcon device
- * @dev:		device owning the extcon device being created
- * @supported_cable:	Array of supported extcon ending with EXTCON_NONE.
- *			If supported_cable is NULL, cable name related APIs
- *			are disabled.
+ * @dev:		the device owning the extcon device being created
+ * @supported_cable:	the array of the supported external connectors
+ *			ending with EXTCON_NONE.
 *
 * This function manages automatically the memory of extcon device using device
 * resource management and simplify the control of freeing the memory of extcon
@ -97,8 +96,8 @@ EXPORT_SYMBOL_GPL(devm_extcon_dev_allocate);

 /**
 * devm_extcon_dev_free() - Resource-managed extcon_dev_unregister()
- * @dev:	device the extcon belongs to
- * @edev:	the extcon device to unregister
+ * @dev:	the device owning the extcon device being created
+ * @edev:	the extcon device to be freed
 *
 * Free the memory that is allocated with devm_extcon_dev_allocate()
 * function.
@ -112,10 +111,9 @@ EXPORT_SYMBOL_GPL(devm_extcon_dev_free);

 /**
 * devm_extcon_dev_register() - Resource-managed extcon_dev_register()
- * @dev:	device to allocate extcon device
- * @edev:	the new extcon device to register
+ * @dev:	the device owning the extcon device being created
+ * @edev:	the extcon device to be registered
 *
- * Managed extcon_dev_register() function. If extcon device is attached with
 * this function, that extcon device is automatically unregistered on driver
 * detach. Internally this function calls extcon_dev_register() function.
 * To get more information, refer that function.
@ -149,8 +147,8 @@ EXPORT_SYMBOL_GPL(devm_extcon_dev_register);

 /**
 * devm_extcon_dev_unregister() - Resource-managed extcon_dev_unregister()
- * @dev:	device the extcon belongs to
- * @edev:	the extcon device to unregister
+ * @dev:	the device owning the extcon device being created
+ * @edev:	the extcon device to unregistered
 *
 * Unregister extcon device that is registered with devm_extcon_dev_register()
 * function.
@ -164,10 +162,10 @@ EXPORT_SYMBOL_GPL(devm_extcon_dev_unregister);

 /**
 * devm_extcon_register_notifier() - Resource-managed extcon_register_notifier()
- * @dev:	device to allocate extcon device
- * @edev:	the extcon device that has the external connecotr.
- * @id:		the unique id of each external connector in extcon enumeration.
- * @nb:		a notifier block to be registered.
+ * @dev:	the device owning the extcon device being created
+ * @edev:	the extcon device
+ * @id:		the unique id among the extcon enumeration
+ * @nb:		a notifier block to be registered
 *
 * This function manages automatically the notifier of extcon device using
 * device resource management and simplify the control of unregistering
@ -208,10 +206,10 @@ EXPORT_SYMBOL(devm_extcon_register_notifier);
 /**
 * devm_extcon_unregister_notifier()
 			- Resource-managed extcon_unregister_notifier()
- * @dev:	device to allocate extcon device
- * @edev:	the extcon device that has the external connecotr.
- * @id:		the unique id of each external connector in extcon enumeration.
- * @nb:		a notifier block to be registered.
+ * @dev:	the device owning the extcon device being created
+ * @edev:	the extcon device
+ * @id:		the unique id among the extcon enumeration
+ * @nb:		a notifier block to be registered
 */
 void devm_extcon_unregister_notifier(struct device *dev,
 				struct extcon_dev *edev, unsigned int id,
@ -225,9 +223,9 @@ EXPORT_SYMBOL(devm_extcon_unregister_notifier);
 /**
 * devm_extcon_register_notifier_all()
 *		- Resource-managed extcon_register_notifier_all()
- * @dev:	device to allocate extcon device
- * @edev:	the extcon device that has the external connecotr.
- * @nb:		a notifier block to be registered.
+ * @dev:	the device owning the extcon device being created
+ * @edev:	the extcon device
+ * @nb:		a notifier block to be registered
 *
 * This function manages automatically the notifier of extcon device using
 * device resource management and simplify the control of unregistering
@ -263,9 +261,9 @@ EXPORT_SYMBOL(devm_extcon_register_notifier_all);
 /**
 * devm_extcon_unregister_notifier_all()
 *		- Resource-managed extcon_unregister_notifier_all()
- * @dev:	device to allocate extcon device
- * @edev:	the extcon device that has the external connecotr.
- * @nb:		a notifier block to be registered.
+ * @dev:	the device owning the extcon device being created
+ * @edev:	the extcon device
+ * @nb:		a notifier block to be registered
 */
 void devm_extcon_unregister_notifier_all(struct device *dev,
 				struct extcon_dev *edev,
--- a/drivers/extcon/extcon-intel-int3496.c
+++ b/drivers/extcon/extcon-intel-int3496.c
@ -171,7 +171,7 @@ static int int3496_remove(struct platform_device *pdev)
 	return 0;
 }

-static struct acpi_device_id int3496_acpi_match[] = {
+static const struct acpi_device_id int3496_acpi_match[] = {
 	{ "INT3496" },
 	{ }
 };
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@ -811,9 +811,8 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			 */
 			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 						attached);
-			if (!cable_attached)
-				extcon_set_state_sync(info->edev,
-					EXTCON_DISP_MHL, cable_attached);
+			extcon_set_state_sync(info->edev, EXTCON_DISP_MHL,
+						cable_attached);
 			break;
 		}

--- a/drivers/extcon/extcon-usbc-cros-ec.c
+++ b/drivers/extcon/extcon-usbc-cros-ec.c
@ -0,0 +1,417 @@
+/**
+ * drivers/extcon/extcon-usbc-cros-ec - ChromeOS Embedded Controller extcon
+ *
+ * Copyright (C) 2017 Google, Inc
+ * Author: Benson Leung <bleung@chromium.org>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/extcon.h>
+#include <linux/kernel.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+
+struct cros_ec_extcon_info {
+	struct device *dev;
+	struct extcon_dev *edev;
+
+	int port_id;
+
+	struct cros_ec_device *ec;
+
+	struct notifier_block notifier;
+
+	bool dp; /* DisplayPort enabled */
+	bool mux; /* SuperSpeed (usb3) enabled */
+	unsigned int power_type;
+};
+
+static const unsigned int usb_type_c_cable[] = {
+	EXTCON_DISP_DP,
+	EXTCON_NONE,
+};
+
+/**
+ * cros_ec_pd_command() - Send a command to the EC.
+ * @info: pointer to struct cros_ec_extcon_info
+ * @command: EC command
+ * @version: EC command version
+ * @outdata: EC command output data
+ * @outsize: Size of outdata
+ * @indata: EC command input data
+ * @insize: Size of indata
+ *
+ * Return: 0 on success, <0 on failure.
+ */
+static int cros_ec_pd_command(struct cros_ec_extcon_info *info,
+			      unsigned int command,
+			      unsigned int version,
+			      void *outdata,
+			      unsigned int outsize,
+			      void *indata,
+			      unsigned int insize)
+{
+	struct cros_ec_command *msg;
+	int ret;
+
+	msg = kzalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	msg->version = version;
+	msg->command = command;
+	msg->outsize = outsize;
+	msg->insize = insize;
+
+	if (outsize)
+		memcpy(msg->data, outdata, outsize);
+
+	ret = cros_ec_cmd_xfer_status(info->ec, msg);
+	if (ret >= 0 && insize)
+		memcpy(indata, msg->data, insize);
+
+	kfree(msg);
+	return ret;
+}
+
+/**
+ * cros_ec_usb_get_power_type() - Get power type info about PD device attached
+ * to given port.
+ * @info: pointer to struct cros_ec_extcon_info
+ *
+ * Return: power type on success, <0 on failure.
+ */
+static int cros_ec_usb_get_power_type(struct cros_ec_extcon_info *info)
+{
+	struct ec_params_usb_pd_power_info req;
+	struct ec_response_usb_pd_power_info resp;
+	int ret;
+
+	req.port = info->port_id;
+	ret = cros_ec_pd_command(info, EC_CMD_USB_PD_POWER_INFO, 0,
+				 &req, sizeof(req), &resp, sizeof(resp));
+	if (ret < 0)
+		return ret;
+
+	return resp.type;
+}
+
+/**
+ * cros_ec_usb_get_pd_mux_state() - Get PD mux state for given port.
+ * @info: pointer to struct cros_ec_extcon_info
+ *
+ * Return: PD mux state on success, <0 on failure.
+ */
+static int cros_ec_usb_get_pd_mux_state(struct cros_ec_extcon_info *info)
+{
+	struct ec_params_usb_pd_mux_info req;
+	struct ec_response_usb_pd_mux_info resp;
+	int ret;
+
+	req.port = info->port_id;
+	ret = cros_ec_pd_command(info, EC_CMD_USB_PD_MUX_INFO, 0,
+				 &req, sizeof(req),
+				 &resp, sizeof(resp));
+	if (ret < 0)
+		return ret;
+
+	return resp.flags;
+}
+
+/**
+ * cros_ec_usb_get_role() - Get role info about possible PD device attached to a
+ * given port.
+ * @info: pointer to struct cros_ec_extcon_info
+ * @polarity: pointer to cable polarity (return value)
+ *
+ * Return: role info on success, -ENOTCONN if no cable is connected, <0 on
+ * failure.
+ */
+static int cros_ec_usb_get_role(struct cros_ec_extcon_info *info,
+				bool *polarity)
+{
+	struct ec_params_usb_pd_control pd_control;
+	struct ec_response_usb_pd_control_v1 resp;
+	int ret;
+
+	pd_control.port = info->port_id;
+	pd_control.role = USB_PD_CTRL_ROLE_NO_CHANGE;
+	pd_control.mux = USB_PD_CTRL_MUX_NO_CHANGE;
+	ret = cros_ec_pd_command(info, EC_CMD_USB_PD_CONTROL, 1,
+				 &pd_control, sizeof(pd_control),
+				 &resp, sizeof(resp));
+	if (ret < 0)
+		return ret;
+
+	if (!(resp.enabled & PD_CTRL_RESP_ENABLED_CONNECTED))
+		return -ENOTCONN;
+
+	*polarity = resp.polarity;
+
+	return resp.role;
+}
+
+/**
+ * cros_ec_pd_get_num_ports() - Get number of EC charge ports.
+ * @info: pointer to struct cros_ec_extcon_info
+ *
+ * Return: number of ports on success, <0 on failure.
+ */
+static int cros_ec_pd_get_num_ports(struct cros_ec_extcon_info *info)
+{
+	struct ec_response_usb_pd_ports resp;
+	int ret;
+
+	ret = cros_ec_pd_command(info, EC_CMD_USB_PD_PORTS,
+				 0, NULL, 0, &resp, sizeof(resp));
+	if (ret < 0)
+		return ret;
+
+	return resp.num_ports;
+}
+
+static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
+				       bool force)
+{
+	struct device *dev = info->dev;
+	int role, power_type;
+	bool polarity = false;
+	bool dp = false;
+	bool mux = false;
+	bool hpd = false;
+
+	power_type = cros_ec_usb_get_power_type(info);
+	if (power_type < 0) {
+		dev_err(dev, "failed getting power type err = %d\n",
+			power_type);
+		return power_type;
+	}
+
+	role = cros_ec_usb_get_role(info, &polarity);
+	if (role < 0) {
+		if (role != -ENOTCONN) {
+			dev_err(dev, "failed getting role err = %d\n", role);
+			return role;
+		}
+	} else {
+		int pd_mux_state;
+
+		pd_mux_state = cros_ec_usb_get_pd_mux_state(info);
+		if (pd_mux_state < 0)
+			pd_mux_state = USB_PD_MUX_USB_ENABLED;
+
+		dp = pd_mux_state & USB_PD_MUX_DP_ENABLED;
+		mux = pd_mux_state & USB_PD_MUX_USB_ENABLED;
+		hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ;
+	}
+
+	if (force || info->dp != dp || info->mux != mux ||
+		info->power_type != power_type) {
+
+		info->dp = dp;
+		info->mux = mux;
+		info->power_type = power_type;
+
+		extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
+
+		extcon_set_property(info->edev, EXTCON_DISP_DP,
+				    EXTCON_PROP_USB_TYPEC_POLARITY,
+				    (union extcon_property_value)(int)polarity);
+		extcon_set_property(info->edev, EXTCON_DISP_DP,
+				    EXTCON_PROP_USB_SS,
+				    (union extcon_property_value)(int)mux);
+		extcon_set_property(info->edev, EXTCON_DISP_DP,
+				    EXTCON_PROP_DISP_HPD,
+				    (union extcon_property_value)(int)hpd);
+
+		extcon_sync(info->edev, EXTCON_DISP_DP);
+
+	} else if (hpd) {
+		extcon_set_property(info->edev, EXTCON_DISP_DP,
+				    EXTCON_PROP_DISP_HPD,
+				    (union extcon_property_value)(int)hpd);
+		extcon_sync(info->edev, EXTCON_DISP_DP);
+	}
+
+	return 0;
+}
+
+static int extcon_cros_ec_event(struct notifier_block *nb,
+				unsigned long queued_during_suspend,
+				void *_notify)
+{
+	struct cros_ec_extcon_info *info;
+	struct cros_ec_device *ec;
+	u32 host_event;
+
+	info = container_of(nb, struct cros_ec_extcon_info, notifier);
+	ec = info->ec;
+
+	host_event = cros_ec_get_host_event(ec);
+	if (host_event & (EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU) |
+			  EC_HOST_EVENT_MASK(EC_HOST_EVENT_USB_MUX))) {
+		extcon_cros_ec_detect_cable(info, false);
+		return NOTIFY_OK;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static int extcon_cros_ec_probe(struct platform_device *pdev)
+{
+	struct cros_ec_extcon_info *info;
+	struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	int numports, ret;
+
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->dev = dev;
+	info->ec = ec;
+
+	if (np) {
+		u32 port;
+
+		ret = of_property_read_u32(np, "google,usb-port-id", &port);
+		if (ret < 0) {
+			dev_err(dev, "Missing google,usb-port-id property\n");
+			return ret;
+		}
+		info->port_id = port;
+	} else {
+		info->port_id = pdev->id;
+	}
+
+	numports = cros_ec_pd_get_num_ports(info);
+	if (numports < 0) {
+		dev_err(dev, "failed getting number of ports! ret = %d\n",
+			numports);
+		return numports;
+	}
+
+	if (info->port_id >= numports) {
+		dev_err(dev, "This system only supports %d ports\n", numports);
+		return -ENODEV;
+	}
+
+	info->edev = devm_extcon_dev_allocate(dev, usb_type_c_cable);
+	if (IS_ERR(info->edev)) {
+		dev_err(dev, "failed to allocate extcon device\n");
+		return -ENOMEM;
+	}
+
+	ret = devm_extcon_dev_register(dev, info->edev);
+	if (ret < 0) {
+		dev_err(dev, "failed to register extcon device\n");
+		return ret;
+	}
+
+	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
+				       EXTCON_PROP_USB_TYPEC_POLARITY);
+	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
+				       EXTCON_PROP_USB_SS);
+	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
+				       EXTCON_PROP_DISP_HPD);
+
+	platform_set_drvdata(pdev, info);
+
+	/* Get PD events from the EC */
+	info->notifier.notifier_call = extcon_cros_ec_event;
+	ret = blocking_notifier_chain_register(&info->ec->event_notifier,
+					       &info->notifier);
+	if (ret < 0) {
+		dev_err(dev, "failed to register notifier\n");
+		return ret;
+	}
+
+	/* Perform initial detection */
+	ret = extcon_cros_ec_detect_cable(info, true);
+	if (ret < 0) {
+		dev_err(dev, "failed to detect initial cable state\n");
+		goto unregister_notifier;
+	}
+
+	return 0;
+
+unregister_notifier:
+	blocking_notifier_chain_unregister(&info->ec->event_notifier,
+					   &info->notifier);
+	return ret;
+}
+
+static int extcon_cros_ec_remove(struct platform_device *pdev)
+{
+	struct cros_ec_extcon_info *info = platform_get_drvdata(pdev);
+
+	blocking_notifier_chain_unregister(&info->ec->event_notifier,
+					   &info->notifier);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int extcon_cros_ec_suspend(struct device *dev)
+{
+	return 0;
+}
+
+static int extcon_cros_ec_resume(struct device *dev)
+{
+	int ret;
+	struct cros_ec_extcon_info *info = dev_get_drvdata(dev);
+
+	ret = extcon_cros_ec_detect_cable(info, true);
+	if (ret < 0)
+		dev_err(dev, "failed to detect cable state on resume\n");
+
+	return 0;
+}
+
+static const struct dev_pm_ops extcon_cros_ec_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(extcon_cros_ec_suspend, extcon_cros_ec_resume)
+};
+
+#define DEV_PM_OPS	(&extcon_cros_ec_dev_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_OF
+static const struct of_device_id extcon_cros_ec_of_match[] = {
+	{ .compatible = "google,extcon-usbc-cros-ec" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, extcon_cros_ec_of_match);
+#endif /* CONFIG_OF */
+
+static struct platform_driver extcon_cros_ec_driver = {
+	.driver = {
+		.name  = "extcon-usbc-cros-ec",
+		.of_match_table = of_match_ptr(extcon_cros_ec_of_match),
+		.pm = DEV_PM_OPS,
+	},
+	.remove  = extcon_cros_ec_remove,
+	.probe   = extcon_cros_ec_probe,
+};
+
+module_platform_driver(extcon_cros_ec_driver);
+
+MODULE_DESCRIPTION("ChromeOS Embedded Controller extcon driver");
+MODULE_AUTHOR("Benson Leung <bleung@chromium.org>");
+MODULE_LICENSE("GPL");
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@ -1,7 +1,5 @@
 /*
- *  drivers/extcon/extcon.c - External Connector (extcon) framework.
- *
- *  External connector (extcon) class driver
+ * drivers/extcon/extcon.c - External Connector (extcon) framework.
 *
 * Copyright (C) 2015 Samsung Electronics
 * Author: Chanwoo Choi <cw00.choi@samsung.com>
@ -37,7 +35,6 @@
 #include "extcon.h"

 #define SUPPORTED_CABLE_MAX	32
-#define CABLE_NAME_MAX		30

 struct __extcon_info {
 	unsigned int type;
@ -200,13 +197,13 @@ struct __extcon_info {
 };

 /**
- * struct extcon_cable - An internal data for each cable of extcon device.
- * @edev:		The extcon device
- * @cable_index:	Index of this cable in the edev
- * @attr_g:		Attribute group for the cable
+ * struct extcon_cable - An internal data for an external connector.
+ * @edev:		the extcon device
+ * @cable_index:	the index of this cable in the edev
+ * @attr_g:		the attribute group for the cable
 * @attr_name:		"name" sysfs entry
 * @attr_state:		"state" sysfs entry
- * @attrs:		Array pointing to attr_name and attr_state for attr_g
+ * @attrs:		the array pointing to attr_name and attr_state for attr_g
 */
 struct extcon_cable {
 	struct extcon_dev *edev;
@ -234,15 +231,6 @@ static struct class *extcon_class;
 static LIST_HEAD(extcon_dev_list);
 static DEFINE_MUTEX(extcon_dev_list_lock);

-/**
- * check_mutually_exclusive - Check if new_state violates mutually_exclusive
- *			      condition.
- * @edev:	the extcon device
- * @new_state:	new cable attach status for @edev
- *
- * Returns 0 if nothing violates. Returns the index + 1 for the first
- * violated condition.
- */
 static int check_mutually_exclusive(struct extcon_dev *edev, u32 new_state)
 {
 	int i = 0;
@ -417,11 +405,13 @@ static ssize_t cable_state_show(struct device *dev,
 }

 /**
- * extcon_sync()	- Synchronize the states for both the attached/detached
- * @edev:		the extcon device that has the cable.
+ * extcon_sync() - Synchronize the state for an external connector.
+ * @edev:	the extcon device
 *
- * This function send a notification to synchronize the all states of a
- * specific external connector
+ * Note that this function send a notification in order to synchronize
+ * the state and property of an external connector.
+ *
+ * Returns 0 if success or error number if fail.
 */
 int extcon_sync(struct extcon_dev *edev, unsigned int id)
 {
@ -497,9 +487,11 @@ int extcon_sync(struct extcon_dev *edev, unsigned int id)
 EXPORT_SYMBOL_GPL(extcon_sync);

 /**
- * extcon_get_state() - Get the state of a external connector.
- * @edev:	the extcon device that has the cable.
- * @id:		the unique id of each external connector in extcon enumeration.
+ * extcon_get_state() - Get the state of an external connector.
+ * @edev:	the extcon device
+ * @id:		the unique id indicating an external connector
+ *
+ * Returns 0 if success or error number if fail.
 */
 int extcon_get_state(struct extcon_dev *edev, const unsigned int id)
 {
@ -522,20 +514,19 @@ int extcon_get_state(struct extcon_dev *edev, const unsigned int id)
 EXPORT_SYMBOL_GPL(extcon_get_state);

 /**
- * extcon_set_state() - Set the state of a external connector.
- *			without a notification.
- * @edev:		the extcon device that has the cable.
- * @id:			the unique id of each external connector
- *			in extcon enumeration.
- * @state:		the new cable status. The default semantics is
- *			true: attached / false: detached.
+ * extcon_set_state() - Set the state of an external connector.
+ * @edev:	the extcon device
+ * @id:		the unique id indicating an external connector
+ * @state:	the new state of an external connector.
+ *		the default semantics is true: attached / false: detached.
 *
- * This function only set the state of a external connector without
- * a notification. To synchronize the data of a external connector,
- * use extcon_set_state_sync() and extcon_sync().
+ * Note that this function set the state of an external connector without
+ * a notification. To synchronize the state of an external connector,
+ * have to use extcon_set_state_sync() and extcon_sync().
+ *
+ * Returns 0 if success or error number if fail.
 */
-int extcon_set_state(struct extcon_dev *edev, unsigned int id,
-				bool cable_state)
+int extcon_set_state(struct extcon_dev *edev, unsigned int id, bool state)
 {
 	unsigned long flags;
 	int index, ret = 0;
@ -550,11 +541,11 @@ int extcon_set_state(struct extcon_dev *edev, unsigned int id,
 	spin_lock_irqsave(&edev->lock, flags);

 	/* Check whether the external connector's state is changed. */
-	if (!is_extcon_changed(edev, index, cable_state))
+	if (!is_extcon_changed(edev, index, state))
 		goto out;

 	if (check_mutually_exclusive(edev,
-		(edev->state & ~BIT(index)) | (cable_state & BIT(index)))) {
+		(edev->state & ~BIT(index)) | (state & BIT(index)))) {
 		ret = -EPERM;
 		goto out;
 	}
@ -563,11 +554,11 @@ int extcon_set_state(struct extcon_dev *edev, unsigned int id,
 	 * Initialize the value of extcon property before setting
 	 * the detached state for an external connector.
 	 */
-	if (!cable_state)
+	if (!state)
 		init_property(edev, id, index);

-	/* Update the state for a external connector. */
-	if (cable_state)
+	/* Update the state for an external connector. */
+	if (state)
 		edev->state |= BIT(index);
 	else
 		edev->state &= ~(BIT(index));
@ -579,19 +570,18 @@ int extcon_set_state(struct extcon_dev *edev, unsigned int id,
 EXPORT_SYMBOL_GPL(extcon_set_state);

 /**
- * extcon_set_state_sync() - Set the state of a external connector
- *			with a notification.
- * @edev:		the extcon device that has the cable.
- * @id:			the unique id of each external connector
- *			in extcon enumeration.
- * @state:		the new cable status. The default semantics is
- *			true: attached / false: detached.
+ * extcon_set_state_sync() - Set the state of an external connector with sync.
+ * @edev:	the extcon device
+ * @id:		the unique id indicating an external connector
+ * @state:	the new state of external connector.
+ *		the default semantics is true: attached / false: detached.
 *
- * This function set the state of external connector and synchronize the data
- * by usning a notification.
+ * Note that this function set the state of external connector
+ * and synchronize the state by sending a notification.
+ *
+ * Returns 0 if success or error number if fail.
 */
-int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
-				bool cable_state)
+int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id, bool state)
 {
 	int ret, index;
 	unsigned long flags;
@ -602,12 +592,12 @@ int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,

 	/* Check whether the external connector's state is changed. */
 	spin_lock_irqsave(&edev->lock, flags);
-	ret = is_extcon_changed(edev, index, cable_state);
+	ret = is_extcon_changed(edev, index, state);
 	spin_unlock_irqrestore(&edev->lock, flags);
 	if (!ret)
 		return 0;

-	ret = extcon_set_state(edev, id, cable_state);
+	ret = extcon_set_state(edev, id, state);
 	if (ret < 0)
 		return ret;

@ -616,19 +606,18 @@ int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
 EXPORT_SYMBOL_GPL(extcon_set_state_sync);

 /**
- * extcon_get_property() - Get the property value of a specific cable.
- * @edev:		the extcon device that has the cable.
- * @id:			the unique id of each external connector
- *			in extcon enumeration.
- * @prop:		the property id among enum extcon_property.
- * @prop_val:		the pointer which store the value of property.
+ * extcon_get_property() - Get the property value of an external connector.
+ * @edev:	the extcon device
+ * @id:		the unique id indicating an external connector
+ * @prop:	the property id indicating an extcon property
+ * @prop_val:	the pointer which store the value of extcon property
 *
- * When getting the property value of external connector, the external connector
- * should be attached. If detached state, function just return 0 without
- * property value. Also, the each property should be included in the list of
- * supported properties according to the type of external connectors.
+ * Note that when getting the property value of external connector,
+ * the external connector should be attached. If detached state, function
+ * return 0 without property value. Also, the each property should be
+ * included in the list of supported properties according to extcon type.
 *
- * Returns 0 if success or error number if fail
+ * Returns 0 if success or error number if fail.
 */
 int extcon_get_property(struct extcon_dev *edev, unsigned int id,
 				unsigned int prop,
@ -698,17 +687,16 @@ int extcon_get_property(struct extcon_dev *edev, unsigned int id,
 EXPORT_SYMBOL_GPL(extcon_get_property);

 /**
- * extcon_set_property() - Set the property value of a specific cable.
- * @edev:		the extcon device that has the cable.
- * @id:			the unique id of each external connector
- *			in extcon enumeration.
- * @prop:		the property id among enum extcon_property.
- * @prop_val:		the pointer including the new value of property.
+ * extcon_set_property() - Set the property value of an external connector.
+ * @edev:	the extcon device
+ * @id:		the unique id indicating an external connector
+ * @prop:	the property id indicating an extcon property
+ * @prop_val:	the pointer including the new value of extcon property
 *
- * The each property should be included in the list of supported properties
- * according to the type of external connectors.
+ * Note that each property should be included in the list of supported
+ * properties according to the extcon type.
 *
- * Returns 0 if success or error number if fail
+ * Returns 0 if success or error number if fail.
 */
 int extcon_set_property(struct extcon_dev *edev, unsigned int id,
 				unsigned int prop,
@ -766,15 +754,14 @@ int extcon_set_property(struct extcon_dev *edev, unsigned int id,
 EXPORT_SYMBOL_GPL(extcon_set_property);

 /**
- * extcon_set_property_sync() - Set the property value of a specific cable
-			with a notification.
- * @prop_val:		the pointer including the new value of property.
+ * extcon_set_property_sync() - Set property of an external connector with sync.
+ * @prop_val:	the pointer including the new value of extcon property
 *
- * When setting the property value of external connector, the external connector
- * should be attached. The each property should be included in the list of
- * supported properties according to the type of external connectors.
+ * Note that when setting the property value of external connector,
+ * the external connector should be attached. The each property should
+ * be included in the list of supported properties according to extcon type.
 *
- * Returns 0 if success or error number if fail
+ * Returns 0 if success or error number if fail.
 */
 int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
 				unsigned int prop,
@ -791,12 +778,11 @@ int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
 EXPORT_SYMBOL_GPL(extcon_set_property_sync);

 /**
- * extcon_get_property_capability() - Get the capability of property
- *			of an external connector.
- * @edev:		the extcon device that has the cable.
- * @id:			the unique id of each external connector
- *			in extcon enumeration.
- * @prop:		the property id among enum extcon_property.
+ * extcon_get_property_capability() - Get the capability of the property
+ *					for an external connector.
+ * @edev:	the extcon device
+ * @id:		the unique id indicating an external connector
+ * @prop:	the property id indicating an extcon property
 *
 * Returns 1 if the property is available or 0 if not available.
 */
@ -822,18 +808,17 @@ int extcon_get_property_capability(struct extcon_dev *edev, unsigned int id,
 EXPORT_SYMBOL_GPL(extcon_get_property_capability);

 /**
- * extcon_set_property_capability() - Set the capability of a property
- *			of an external connector.
- * @edev:		the extcon device that has the cable.
- * @id:			the unique id of each external connector
- *			in extcon enumeration.
- * @prop:		the property id among enum extcon_property.
+ * extcon_set_property_capability() - Set the capability of the property
+ *					for an external connector.
+ * @edev:	the extcon device
+ * @id:		the unique id indicating an external connector
+ * @prop:	the property id indicating an extcon property
 *
- * This function set the capability of a property for an external connector
- * to mark the bit in capability bitmap which mean the available state of
- * a property.
+ * Note that this function set the capability of the property
+ * for an external connector in order to mark the bit in capability
+ * bitmap which mean the available state of the property.
 *
- * Returns 0 if success or error number if fail
+ * Returns 0 if success or error number if fail.
 */
 int extcon_set_property_capability(struct extcon_dev *edev, unsigned int id,
 					unsigned int prop)
@ -881,8 +866,10 @@ int extcon_set_property_capability(struct extcon_dev *edev, unsigned int id,
 EXPORT_SYMBOL_GPL(extcon_set_property_capability);

 /**
- * extcon_get_extcon_dev() - Get the extcon device instance from the name
- * @extcon_name:	The extcon name provided with extcon_dev_register()
+ * extcon_get_extcon_dev() - Get the extcon device instance from the name.
+ * @extcon_name:	the extcon name provided with extcon_dev_register()
+ *
+ * Return the pointer of extcon device if success or ERR_PTR(err) if fail.
 */
 struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
 {
@ -904,15 +891,17 @@ struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
 EXPORT_SYMBOL_GPL(extcon_get_extcon_dev);

 /**
- * extcon_register_notifier() - Register a notifiee to get notified by
- *				any attach status changes from the extcon.
- * @edev:	the extcon device that has the external connecotr.
- * @id:		the unique id of each external connector in extcon enumeration.
- * @nb:		a notifier block to be registered.
+ * extcon_register_notifier() - Register a notifier block to get notified by
+ *				any state changes from the extcon.
+ * @edev:	the extcon device
+ * @id:		the unique id indicating an external connector
+ * @nb:		a notifier block to be registered
 *
 * Note that the second parameter given to the callback of nb (val) is
- * "old_state", not the current state. The current state can be retrieved
- * by looking at the third pameter (edev pointer)'s state value.
+ * the current state of an external connector and the third pameter
+ * is the pointer of extcon device.
+ *
+ * Returns 0 if success or error number if fail.
 */
 int extcon_register_notifier(struct extcon_dev *edev, unsigned int id,
 			     struct notifier_block *nb)
@ -936,10 +925,12 @@ int extcon_register_notifier(struct extcon_dev *edev, unsigned int id,
 EXPORT_SYMBOL_GPL(extcon_register_notifier);

 /**
- * extcon_unregister_notifier() - Unregister a notifiee from the extcon device.
- * @edev:	the extcon device that has the external connecotr.
- * @id:		the unique id of each external connector in extcon enumeration.
- * @nb:		a notifier block to be registered.
+ * extcon_unregister_notifier() - Unregister a notifier block from the extcon.
+ * @edev:	the extcon device
+ * @id:		the unique id indicating an external connector
+ * @nb:		a notifier block to be registered
+ *
+ * Returns 0 if success or error number if fail.
 */
 int extcon_unregister_notifier(struct extcon_dev *edev, unsigned int id,
 				struct notifier_block *nb)
@ -963,16 +954,16 @@ int extcon_unregister_notifier(struct extcon_dev *edev, unsigned int id,
 EXPORT_SYMBOL_GPL(extcon_unregister_notifier);

 /**
- * extcon_register_notifier_all() - Register a notifier block for all connectors
- * @edev:	the extcon device that has the external connector.
- * @nb:		a notifier block to be registered.
+ * extcon_register_notifier_all() - Register a notifier block for all connectors.
+ * @edev:	the extcon device
+ * @nb:		a notifier block to be registered
 *
- * This function registers a notifier block in order to receive the state
- * change of all supported external connectors from extcon device.
+ * Note that this function registers a notifier block in order to receive
+ * the state change of all supported external connectors from extcon device.
 * And the second parameter given to the callback of nb (val) is
- * the current state and third parameter is the edev pointer.
+ * the current state and the third pameter is the pointer of extcon device.
 *
- * Returns 0 if success or error number if fail
+ * Returns 0 if success or error number if fail.
 */
 int extcon_register_notifier_all(struct extcon_dev *edev,
 				struct notifier_block *nb)
@ -993,10 +984,10 @@ EXPORT_SYMBOL_GPL(extcon_register_notifier_all);

 /**
 * extcon_unregister_notifier_all() - Unregister a notifier block from extcon.
- * @edev:	the extcon device that has the external connecotr.
- * @nb:		a notifier block to be registered.
+ * @edev:	the extcon device
+ * @nb:		a notifier block to be registered
 *
- * Returns 0 if success or error number if fail
+ * Returns 0 if success or error number if fail.
 */
 int extcon_unregister_notifier_all(struct extcon_dev *edev,
 				struct notifier_block *nb)
@ -1045,15 +1036,14 @@ static void dummy_sysfs_dev_release(struct device *dev)

 /*
 * extcon_dev_allocate() - Allocate the memory of extcon device.
- * @supported_cable:	Array of supported extcon ending with EXTCON_NONE.
- *			If supported_cable is NULL, cable name related APIs
- *			are disabled.
+ * @supported_cable:	the array of the supported external connectors
+ *			ending with EXTCON_NONE.
 *
- * This function allocates the memory for extcon device without allocating
- * memory in each extcon provider driver and initialize default setting for
- * extcon device.
+ * Note that this function allocates the memory for extcon device 
+ * and initialize default setting for the extcon device.
 *
- * Return the pointer of extcon device if success or ERR_PTR(err) if fail
+ * Returns the pointer memory of allocated extcon_dev if success
+ * or ERR_PTR(err) if fail.
 */
 struct extcon_dev *extcon_dev_allocate(const unsigned int *supported_cable)
 {
@ -1074,7 +1064,7 @@ struct extcon_dev *extcon_dev_allocate(const unsigned int *supported_cable)

 /*
 * extcon_dev_free() - Free the memory of extcon device.
- * @edev:	the extcon device to free
+ * @edev:	the extcon device
 */
 void extcon_dev_free(struct extcon_dev *edev)
 {
@ -1083,13 +1073,18 @@ void extcon_dev_free(struct extcon_dev *edev)
 EXPORT_SYMBOL_GPL(extcon_dev_free);

 /**
- * extcon_dev_register() - Register a new extcon device
- * @edev	: the new extcon device (should be allocated before calling)
+ * extcon_dev_register() - Register an new extcon device
+ * @edev:	the extcon device to be registered
 *
 * Among the members of edev struct, please set the "user initializing data"
- * in any case and set the "optional callbacks" if required. However, please
 * do not set the values of "internal data", which are initialized by
 * this function.
+ *
+ * Note that before calling this funciton, have to allocate the memory
+ * of an extcon device by using the extcon_dev_allocate(). And the extcon
+ * dev should include the supported_cable information.
+ *
+ * Returns 0 if success or error number if fail.
 */
 int extcon_dev_register(struct extcon_dev *edev)
 {
@ -1296,7 +1291,7 @@ EXPORT_SYMBOL_GPL(extcon_dev_register);

 /**
 * extcon_dev_unregister() - Unregister the extcon device.
- * @edev:	the extcon device instance to be unregistered.
+ * @edev:	the extcon device to be unregistered.
 *
 * Note that this does not call kfree(edev) because edev was not allocated
 * by this class.
@ -1342,11 +1337,11 @@ EXPORT_SYMBOL_GPL(extcon_dev_unregister);

 #ifdef CONFIG_OF
 /*
- * extcon_get_edev_by_phandle - Get the extcon device from devicetree
- * @dev - instance to the given device
- * @index - index into list of extcon_dev
+ * extcon_get_edev_by_phandle - Get the extcon device from devicetree.
+ * @dev		: the instance to the given device
+ * @index	: the index into list of extcon_dev
 *
- * return the instance of extcon device
+ * Return the pointer of extcon device if success or ERR_PTR(err) if fail.
 */
 struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
 {
@ -1363,8 +1358,8 @@ struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)

 	node = of_parse_phandle(dev->of_node, "extcon", index);
 	if (!node) {
-		dev_dbg(dev, "failed to get phandle in %s node\n",
-			dev->of_node->full_name);
+		dev_dbg(dev, "failed to get phandle in %pOF node\n",
+			dev->of_node);
 		return ERR_PTR(-ENODEV);
 	}

@ -1411,8 +1406,6 @@ static void __exit extcon_class_exit(void)
 module_exit(extcon_class_exit);

 MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
-MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
-MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
 MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
-MODULE_DESCRIPTION("External connector (extcon) class driver");
-MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("External Connector (extcon) framework");
+MODULE_LICENSE("GPL v2");
--- a/drivers/firmware/google/vpd.c
+++ b/drivers/firmware/google/vpd.c
@ -202,7 +202,7 @@ static int vpd_section_init(const char *name, struct vpd_section *sec,
 	sec->raw_name = kasprintf(GFP_KERNEL, "%s_raw", name);
 	if (!sec->raw_name) {
 		err = -ENOMEM;
-		goto err_iounmap;
+		goto err_memunmap;
 	}

 	sysfs_bin_attr_init(&sec->bin_attr);
@ -233,8 +233,8 @@ static int vpd_section_init(const char *name, struct vpd_section *sec,
 	sysfs_remove_bin_file(vpd_kobj, &sec->bin_attr);
 err_free_raw_name:
 	kfree(sec->raw_name);
-err_iounmap:
-	iounmap(sec->baseaddr);
+err_memunmap:
+	memunmap(sec->baseaddr);
 	return err;
 }

@ -245,7 +245,7 @@ static int vpd_section_destroy(struct vpd_section *sec)
 		kobject_put(sec->kobj);
 		sysfs_remove_bin_file(vpd_kobj, &sec->bin_attr);
 		kfree(sec->raw_name);
-		iounmap(sec->baseaddr);
+		memunmap(sec->baseaddr);
 	}

 	return 0;
@ -262,7 +262,7 @@ static int vpd_sections_init(phys_addr_t physaddr)
 		return -ENOMEM;

 	memcpy_fromio(&header, temp, sizeof(struct vpd_cbmem));
-	iounmap(temp);
+	memunmap(temp);

 	if (header.magic != VPD_CBMEM_MAGIC)
 		return -ENODEV;
--- a/drivers/fmc/Makefile
+++ b/drivers/fmc/Makefile
@ -6,6 +6,7 @@ fmc-y += fmc-match.o
 fmc-y += fmc-sdb.o
 fmc-y += fru-parse.o
 fmc-y += fmc-dump.o
+fmc-y += fmc-debug.o

 obj-$(CONFIG_FMC_FAKEDEV) += fmc-fakedev.o
 obj-$(CONFIG_FMC_TRIVIAL) += fmc-trivial.o
--- a/drivers/fmc/fmc-chardev.c
+++ b/drivers/fmc/fmc-chardev.c
@ -129,8 +129,7 @@ static int fc_probe(struct fmc_device *fmc)

 	struct fc_instance *fc;

-	if (fmc->op->validate)
-		index = fmc->op->validate(fmc, &fc_drv);
+	index = fmc_validate(fmc, &fc_drv);
 	if (index < 0)
 		return -EINVAL; /* not our device: invalid */

--- a/drivers/fmc/fmc-core.c
+++ b/drivers/fmc/fmc-core.c
@ -13,6 +13,9 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/fmc.h>
+#include <linux/fmc-sdb.h>
+
+#include "fmc-private.h"

 static int fmc_check_version(unsigned long version, const char *name)
 {
@ -118,6 +121,61 @@ static struct bin_attribute fmc_eeprom_attr = {
 	.write = fmc_write_eeprom,
 };

+int fmc_irq_request(struct fmc_device *fmc, irq_handler_t h,
+		    char *name, int flags)
+{
+	if (fmc->op->irq_request)
+		return fmc->op->irq_request(fmc, h, name, flags);
+	return -EPERM;
+}
+EXPORT_SYMBOL(fmc_irq_request);
+
+void fmc_irq_free(struct fmc_device *fmc)
+{
+	if (fmc->op->irq_free)
+		fmc->op->irq_free(fmc);
+}
+EXPORT_SYMBOL(fmc_irq_free);
+
+void fmc_irq_ack(struct fmc_device *fmc)
+{
+	if (likely(fmc->op->irq_ack))
+		fmc->op->irq_ack(fmc);
+}
+EXPORT_SYMBOL(fmc_irq_ack);
+
+int fmc_validate(struct fmc_device *fmc, struct fmc_driver *drv)
+{
+	if (fmc->op->validate)
+		return fmc->op->validate(fmc, drv);
+	return -EPERM;
+}
+EXPORT_SYMBOL(fmc_validate);
+
+int fmc_gpio_config(struct fmc_device *fmc, struct fmc_gpio *gpio, int ngpio)
+{
+	if (fmc->op->gpio_config)
+		return fmc->op->gpio_config(fmc, gpio, ngpio);
+	return -EPERM;
+}
+EXPORT_SYMBOL(fmc_gpio_config);
+
+int fmc_read_ee(struct fmc_device *fmc, int pos, void *d, int l)
+{
+	if (fmc->op->read_ee)
+		return fmc->op->read_ee(fmc, pos, d, l);
+	return -EPERM;
+}
+EXPORT_SYMBOL(fmc_read_ee);
+
+int fmc_write_ee(struct fmc_device *fmc, int pos, const void *d, int l)
+{
+	if (fmc->op->write_ee)
+		return fmc->op->write_ee(fmc, pos, d, l);
+	return -EPERM;
+}
+EXPORT_SYMBOL(fmc_write_ee);
+
 /*
 * Functions for client modules follow
 */
@ -141,7 +199,8 @@ EXPORT_SYMBOL(fmc_driver_unregister);
 * When a device set is registered, all eeproms must be read
 * and all FRUs must be parsed
 */
-int fmc_device_register_n(struct fmc_device **devs, int n)
+int fmc_device_register_n_gw(struct fmc_device **devs, int n,
+			  struct fmc_gateware *gw)
 {
 	struct fmc_device *fmc, **devarray;
 	uint32_t device_id;
@ -221,6 +280,21 @@ int fmc_device_register_n(struct fmc_device **devs, int n)
 		else
 			dev_set_name(&fmc->dev, "%s-%04x", fmc->mezzanine_name,
 				     device_id);
+
+		if (gw) {
+			/*
+			 * The carrier already know the bitstream to load
+			 * for this set of FMC mezzanines.
+			 */
+			ret = fmc->op->reprogram_raw(fmc, NULL,
+						     gw->bitstream, gw->len);
+			if (ret) {
+				dev_warn(fmc->hwdev,
+					 "Invalid gateware for FMC mezzanine\n");
+				goto out;
+			}
+		}
+
 		ret = device_add(&fmc->dev);
 		if (ret < 0) {
 			dev_err(fmc->hwdev, "Slot %i: Failed in registering "
@ -234,18 +308,16 @@ int fmc_device_register_n(struct fmc_device **devs, int n)
 		}
 		/* This device went well, give information to the user */
 		fmc_dump_eeprom(fmc);
-		fmc_dump_sdb(fmc);
+		fmc_debug_init(fmc);
 	}
 	return 0;

 out1:
 	device_del(&fmc->dev);
 out:
-	fmc_free_id_info(fmc);
-	put_device(&fmc->dev);
-
 	kfree(devarray);
 	for (i--; i >= 0; i--) {
+		fmc_debug_exit(devs[i]);
 		sysfs_remove_bin_file(&devs[i]->dev.kobj, &fmc_eeprom_attr);
 		device_del(&devs[i]->dev);
 		fmc_free_id_info(devs[i]);
@ -254,8 +326,20 @@ int fmc_device_register_n(struct fmc_device **devs, int n)
 	return ret;

 }
+EXPORT_SYMBOL(fmc_device_register_n_gw);
+
+int fmc_device_register_n(struct fmc_device **devs, int n)
+{
+	return fmc_device_register_n_gw(devs, n, NULL);
+}
 EXPORT_SYMBOL(fmc_device_register_n);

+int fmc_device_register_gw(struct fmc_device *fmc, struct fmc_gateware *gw)
+{
+	return fmc_device_register_n_gw(&fmc, 1, gw);
+}
+EXPORT_SYMBOL(fmc_device_register_gw);
+
 int fmc_device_register(struct fmc_device *fmc)
 {
 	return fmc_device_register_n(&fmc, 1);
@ -273,6 +357,7 @@ void fmc_device_unregister_n(struct fmc_device **devs, int n)
 	kfree(devs[0]->devarray);

 	for (i = 0; i < n; i++) {
+		fmc_debug_exit(devs[i]);
 		sysfs_remove_bin_file(&devs[i]->dev.kobj, &fmc_eeprom_attr);
 		device_del(&devs[i]->dev);
 		fmc_free_id_info(devs[i]);
--- a/drivers/fmc/fmc-debug.c
+++ b/drivers/fmc/fmc-debug.c
@ -0,0 +1,173 @@
+/*
+ * Copyright (C) 2015 CERN (www.cern.ch)
+ * Author: Federico Vaga <federico.vaga@cern.ch>
+ *
+ * Released according to the GNU GPL, version 2 or any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <asm/byteorder.h>
+
+#include <linux/fmc.h>
+#include <linux/sdb.h>
+#include <linux/fmc-sdb.h>
+
+#define FMC_DBG_SDB_DUMP "dump_sdb"
+
+static char *__strip_trailing_space(char *buf, char *str, int len)
+{
+	int i = len - 1;
+
+	memcpy(buf, str, len);
+	buf[len] = '\0';
+	while (i >= 0 && buf[i] == ' ')
+		buf[i--] = '\0';
+	return buf;
+}
+
+#define __sdb_string(buf, field) ({			\
+	BUILD_BUG_ON(sizeof(buf) < sizeof(field));	\
+	__strip_trailing_space(buf, (void *)(field), sizeof(field));	\
+		})
+
+/**
+ * We do not check seq_printf() errors because we want to see things in any case
+ */
+static void fmc_sdb_dump_recursive(struct fmc_device *fmc, struct seq_file *s,
+				   const struct sdb_array *arr)
+{
+	unsigned long base = arr->baseaddr;
+	int i, j, n = arr->len, level = arr->level;
+	char tmp[64];
+
+	for (i = 0; i < n; i++) {
+		union  sdb_record *r;
+		struct sdb_product *p;
+		struct sdb_component *c;
+
+		r = &arr->record[i];
+		c = &r->dev.sdb_component;
+		p = &c->product;
+
+		for (j = 0; j < level; j++)
+			seq_printf(s, "   ");
+		switch (r->empty.record_type) {
+		case sdb_type_interconnect:
+			seq_printf(s, "%08llx:%08x %.19s\n",
+				   __be64_to_cpu(p->vendor_id),
+				   __be32_to_cpu(p->device_id),
+				   p->name);
+			break;
+		case sdb_type_device:
+			seq_printf(s, "%08llx:%08x %.19s (%08llx-%08llx)\n",
+				   __be64_to_cpu(p->vendor_id),
+				   __be32_to_cpu(p->device_id),
+				   p->name,
+				   __be64_to_cpu(c->addr_first) + base,
+				   __be64_to_cpu(c->addr_last) + base);
+			break;
+		case sdb_type_bridge:
+			seq_printf(s, "%08llx:%08x %.19s (bridge: %08llx)\n",
+				   __be64_to_cpu(p->vendor_id),
+				   __be32_to_cpu(p->device_id),
+				   p->name,
+				   __be64_to_cpu(c->addr_first) + base);
+			if (IS_ERR(arr->subtree[i])) {
+				seq_printf(s, "SDB: (bridge error %li)\n",
+					 PTR_ERR(arr->subtree[i]));
+				break;
+			}
+			fmc_sdb_dump_recursive(fmc, s, arr->subtree[i]);
+			break;
+		case sdb_type_integration:
+			seq_printf(s, "integration\n");
+			break;
+		case sdb_type_repo_url:
+			seq_printf(s, "Synthesis repository: %s\n",
+					  __sdb_string(tmp, r->repo_url.repo_url));
+			break;
+		case sdb_type_synthesis:
+			seq_printf(s, "Bitstream '%s' ",
+					  __sdb_string(tmp, r->synthesis.syn_name));
+			seq_printf(s, "synthesized %08x by %s ",
+					  __be32_to_cpu(r->synthesis.date),
+					  __sdb_string(tmp, r->synthesis.user_name));
+			seq_printf(s, "(%s version %x), ",
+					  __sdb_string(tmp, r->synthesis.tool_name),
+					  __be32_to_cpu(r->synthesis.tool_version));
+			seq_printf(s, "commit %pm\n",
+					  r->synthesis.commit_id);
+			break;
+		case sdb_type_empty:
+			seq_printf(s, "empty\n");
+			break;
+		default:
+			seq_printf(s, "UNKNOWN TYPE 0x%02x\n",
+				   r->empty.record_type);
+			break;
+		}
+	}
+}
+
+static int fmc_sdb_dump(struct seq_file *s, void *offset)
+{
+	struct fmc_device *fmc = s->private;
+
+	if (!fmc->sdb) {
+		seq_printf(s, "no SDB information\n");
+		return 0;
+	}
+
+	seq_printf(s, "FMC: %s (%s), slot %i, device %s\n", dev_name(fmc->hwdev),
+	fmc->carrier_name, fmc->slot_id, dev_name(&fmc->dev));
+	/* Dump SDB information */
+	fmc_sdb_dump_recursive(fmc, s, fmc->sdb);
+
+	return 0;
+}
+
+
+static int fmc_sdb_dump_open(struct inode *inode, struct file *file)
+{
+	struct fmc_device *fmc = inode->i_private;
+
+	return single_open(file, fmc_sdb_dump, fmc);
+}
+
+
+const struct file_operations fmc_dbgfs_sdb_dump = {
+	.owner = THIS_MODULE,
+	.open  = fmc_sdb_dump_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+int fmc_debug_init(struct fmc_device *fmc)
+{
+	fmc->dbg_dir = debugfs_create_dir(dev_name(&fmc->dev), NULL);
+	if (IS_ERR_OR_NULL(fmc->dbg_dir)) {
+		pr_err("FMC: Cannot create debugfs\n");
+		return PTR_ERR(fmc->dbg_dir);
+	}
+
+	fmc->dbg_sdb_dump = debugfs_create_file(FMC_DBG_SDB_DUMP, 0444,
+						fmc->dbg_dir, fmc,
+						&fmc_dbgfs_sdb_dump);
+	if (IS_ERR_OR_NULL(fmc->dbg_sdb_dump))
+		pr_err("FMC: Cannot create debugfs file %s\n",
+		       FMC_DBG_SDB_DUMP);
+
+	return 0;
+}
+
+void fmc_debug_exit(struct fmc_device *fmc)
+{
+	if (fmc->dbg_dir)
+		debugfs_remove_recursive(fmc->dbg_dir);
+}
--- a/drivers/fmc/fmc-dump.c
+++ b/drivers/fmc/fmc-dump.c
@ -15,8 +15,6 @@

 static int fmc_must_dump_eeprom;
 module_param_named(dump_eeprom, fmc_must_dump_eeprom, int, 0644);
-static int fmc_must_dump_sdb;
-module_param_named(dump_sdb, fmc_must_dump_sdb, int, 0644);

 #define LINELEN 16

@ -59,42 +57,3 @@ void fmc_dump_eeprom(const struct fmc_device *fmc)
 	for (i = 0; i < fmc->eeprom_len; i += LINELEN, line += LINELEN)
 		prev = dump_line(i, line, prev);
 }
-
-void fmc_dump_sdb(const struct fmc_device *fmc)
-{
-	const uint8_t *line, *prev;
-	int i, len;
-
-	if (!fmc->sdb)
-		return;
-	if (!fmc_must_dump_sdb)
-		return;
-
-	/* If the argument is not-zero, do simple dump (== show) */
-	if (fmc_must_dump_sdb > 0)
-		fmc_show_sdb_tree(fmc);
-
-	if (fmc_must_dump_sdb == 1)
-		return;
-
-	/* If bigger than 1, dump it seriously, to help debugging */
-
-	/*
-	 * Here we should really use libsdbfs (which is designed to
-	 * work in kernel space as well) , but it doesn't support
-	 * directories yet, and it requires better intergration (it
-	 * should be used instead of fmc-specific code).
-	 *
-	 * So, lazily, just dump the top-level array
-	 */
-	pr_info("FMC: %s (%s), slot %i, device %s\n", dev_name(fmc->hwdev),
-		fmc->carrier_name, fmc->slot_id, dev_name(&fmc->dev));
-	pr_info("FMC: poor dump of sdb first level:\n");
-
-	len = fmc->sdb->len * sizeof(union sdb_record);
-	line = (void *)fmc->sdb->record;
-	prev = NULL;
-	for (i = 0; i < len; i += LINELEN, line += LINELEN)
-		prev = dump_line(i, line, prev);
-	return;
-}
--- a/drivers/fmc/fmc-match.c
+++ b/drivers/fmc/fmc-match.c
@ -63,7 +63,7 @@ int fmc_fill_id_info(struct fmc_device *fmc)
 		if (!fmc->eeprom)
 			return -ENOMEM;
 		allocated = 1;
-		ret = fmc->op->read_ee(fmc, 0, fmc->eeprom, fmc->eeprom_len);
+		ret = fmc_read_ee(fmc, 0, fmc->eeprom, fmc->eeprom_len);
 		if (ret < 0)
 			goto out;
 	}
--- a/drivers/fmc/fmc-private.h
+++ b/drivers/fmc/fmc-private.h
@ -0,0 +1,9 @@
+/*
+ * Copyright (C) 2015 CERN (www.cern.ch)
+ * Author: Federico Vaga <federico.vaga@cern.ch>
+ *
+ * Released according to the GNU GPL, version 2 or any later version.
+ */
+
+extern int fmc_debug_init(struct fmc_device *fmc);
+extern void fmc_debug_exit(struct fmc_device *fmc);
--- a/drivers/fmc/fmc-sdb.c
+++ b/drivers/fmc/fmc-sdb.c
@ -126,6 +126,30 @@ int fmc_free_sdb_tree(struct fmc_device *fmc)
 }
 EXPORT_SYMBOL(fmc_free_sdb_tree);

+/* This helper calls reprogram and inizialized sdb as well */
+int fmc_reprogram_raw(struct fmc_device *fmc, struct fmc_driver *d,
+		      void *gw, unsigned long len, int sdb_entry)
+{
+	int ret;
+
+	ret = fmc->op->reprogram_raw(fmc, d, gw, len);
+	if (ret < 0)
+		return ret;
+	if (sdb_entry < 0)
+		return ret;
+
+	/* We are required to find SDB at a given offset */
+	ret = fmc_scan_sdb_tree(fmc, sdb_entry);
+	if (ret < 0) {
+		dev_err(&fmc->dev, "Can't find SDB at address 0x%x\n",
+			sdb_entry);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(fmc_reprogram_raw);
+
 /* This helper calls reprogram and inizialized sdb as well */
 int fmc_reprogram(struct fmc_device *fmc, struct fmc_driver *d, char *gw,
 			 int sdb_entry)
@ -145,108 +169,15 @@ int fmc_reprogram(struct fmc_device *fmc, struct fmc_driver *d, char *gw,
 			sdb_entry);
 		return -ENODEV;
 	}
-	fmc_dump_sdb(fmc);
+
 	return 0;
 }
 EXPORT_SYMBOL(fmc_reprogram);

-static char *__strip_trailing_space(char *buf, char *str, int len)
-{
-	int i = len - 1;
-
-	memcpy(buf, str, len);
-	while(i >= 0 && buf[i] == ' ')
-		buf[i--] = '\0';
-	return buf;
-}
-
-#define __sdb_string(buf, field) ({			\
-	BUILD_BUG_ON(sizeof(buf) < sizeof(field));	\
-	__strip_trailing_space(buf, (void *)(field), sizeof(field));	\
-		})
-
-static void __fmc_show_sdb_tree(const struct fmc_device *fmc,
-				const struct sdb_array *arr)
-{
-	unsigned long base = arr->baseaddr;
-	int i, j, n = arr->len, level = arr->level;
-	char buf[64];
-
-	for (i = 0; i < n; i++) {
-		union  sdb_record *r;
-		struct sdb_product *p;
-		struct sdb_component *c;
-		r = &arr->record[i];
-		c = &r->dev.sdb_component;
-		p = &c->product;
-
-		dev_info(&fmc->dev, "SDB: ");
-
-		for (j = 0; j < level; j++)
-			printk(KERN_CONT "   ");
-		switch (r->empty.record_type) {
-		case sdb_type_interconnect:
-			printk(KERN_CONT "%08llx:%08x %.19s\n",
-			       __be64_to_cpu(p->vendor_id),
-			       __be32_to_cpu(p->device_id),
-			       p->name);
-			break;
-		case sdb_type_device:
-			printk(KERN_CONT "%08llx:%08x %.19s (%08llx-%08llx)\n",
-			       __be64_to_cpu(p->vendor_id),
-			       __be32_to_cpu(p->device_id),
-			       p->name,
-			       __be64_to_cpu(c->addr_first) + base,
-			       __be64_to_cpu(c->addr_last) + base);
-			break;
-		case sdb_type_bridge:
-			printk(KERN_CONT "%08llx:%08x %.19s (bridge: %08llx)\n",
-			       __be64_to_cpu(p->vendor_id),
-			       __be32_to_cpu(p->device_id),
-			       p->name,
-			       __be64_to_cpu(c->addr_first) + base);
-			if (IS_ERR(arr->subtree[i])) {
-				dev_info(&fmc->dev, "SDB: (bridge error %li)\n",
-					 PTR_ERR(arr->subtree[i]));
-				break;
-			}
-			__fmc_show_sdb_tree(fmc, arr->subtree[i]);
-			break;
-		case sdb_type_integration:
-			printk(KERN_CONT "integration\n");
-			break;
-		case sdb_type_repo_url:
-			printk(KERN_CONT "Synthesis repository: %s\n",
-			       __sdb_string(buf, r->repo_url.repo_url));
-			break;
-		case sdb_type_synthesis:
-			printk(KERN_CONT "Bitstream '%s' ",
-			       __sdb_string(buf, r->synthesis.syn_name));
-			printk(KERN_CONT "synthesized %08x by %s ",
-			       __be32_to_cpu(r->synthesis.date),
-			       __sdb_string(buf, r->synthesis.user_name));
-			printk(KERN_CONT "(%s version %x), ",
-			       __sdb_string(buf, r->synthesis.tool_name),
-			       __be32_to_cpu(r->synthesis.tool_version));
-			printk(KERN_CONT "commit %pm\n",
-			       r->synthesis.commit_id);
-			break;
-		case sdb_type_empty:
-			printk(KERN_CONT "empty\n");
-			break;
-		default:
-			printk(KERN_CONT "UNKNOWN TYPE 0x%02x\n",
-			       r->empty.record_type);
-			break;
-		}
-	}
-}
-
 void fmc_show_sdb_tree(const struct fmc_device *fmc)
 {
-	if (!fmc->sdb)
-		return;
-	__fmc_show_sdb_tree(fmc, fmc->sdb);
+	pr_err("%s: not supported anymore, use debugfs to dump SDB\n",
+		__func__);
 }
 EXPORT_SYMBOL(fmc_show_sdb_tree);

--- a/drivers/fmc/fmc-trivial.c
+++ b/drivers/fmc/fmc-trivial.c
@ -24,7 +24,7 @@ static irqreturn_t t_handler(int irq, void *dev_id)
 {
 	struct fmc_device *fmc = dev_id;

-	fmc->op->irq_ack(fmc);
+	fmc_irq_ack(fmc);
 	dev_info(&fmc->dev, "received irq %i\n", irq);
 	return IRQ_HANDLED;
 }
@ -46,25 +46,21 @@ static int t_probe(struct fmc_device *fmc)
 	int ret;
 	int index = 0;

-	if (fmc->op->validate)
-		index = fmc->op->validate(fmc, &t_drv);
+	index = fmc_validate(fmc, &t_drv);
 	if (index < 0)
 		return -EINVAL; /* not our device: invalid */

-	ret = fmc->op->irq_request(fmc, t_handler, "fmc-trivial", IRQF_SHARED);
+	ret = fmc_irq_request(fmc, t_handler, "fmc-trivial", IRQF_SHARED);
 	if (ret < 0)
 		return ret;
 	/* ignore error code of call below, we really don't care */
-	fmc->op->gpio_config(fmc, t_gpio, ARRAY_SIZE(t_gpio));
+	fmc_gpio_config(fmc, t_gpio, ARRAY_SIZE(t_gpio));

-	/* Reprogram, if asked to. ESRCH == no filename specified */
-	ret = -ESRCH;
-	if (fmc->op->reprogram)
-		ret = fmc->op->reprogram(fmc, &t_drv, "");
-	if (ret == -ESRCH)
+	ret = fmc_reprogram(fmc, &t_drv, "", 0);
+	if (ret == -EPERM) /* programming not supported */
 		ret = 0;
 	if (ret < 0)
-		fmc->op->irq_free(fmc);
+		fmc_irq_free(fmc);

 	/* FIXME: reprogram LM32 too */
 	return ret;
@ -72,7 +68,7 @@ static int t_probe(struct fmc_device *fmc)

 static int t_remove(struct fmc_device *fmc)
 {
-	fmc->op->irq_free(fmc);
+	fmc_irq_free(fmc);
 	return 0;
 }

--- a/drivers/fmc/fmc-write-eeprom.c
+++ b/drivers/fmc/fmc-write-eeprom.c
@ -50,7 +50,7 @@ static int fwe_run_tlv(struct fmc_device *fmc, const struct firmware *fw,
 		if (write) {
 			dev_info(&fmc->dev, "write %i bytes at 0x%04x\n",
 				 thislen, thisaddr);
-			err = fmc->op->write_ee(fmc, thisaddr, p + 5, thislen);
+			err = fmc_write_ee(fmc, thisaddr, p + 5, thislen);
 		}
 		if (err < 0) {
 			dev_err(&fmc->dev, "write failure @0x%04x\n",
@ -70,7 +70,7 @@ static int fwe_run_bin(struct fmc_device *fmc, const struct firmware *fw)
 	int ret;

 	dev_info(&fmc->dev, "programming %zi bytes\n", fw->size);
-	ret = fmc->op->write_ee(fmc, 0, (void *)fw->data, fw->size);
+	ret = fmc_write_ee(fmc, 0, (void *)fw->data, fw->size);
 	if (ret < 0) {
 		dev_info(&fmc->dev, "write_eeprom: error %i\n", ret);
 		return ret;
@ -115,8 +115,8 @@ static int fwe_probe(struct fmc_device *fmc)
 			KBUILD_MODNAME);
 		return -ENODEV;
 	}
-	if (fmc->op->validate)
-		index = fmc->op->validate(fmc, &fwe_drv);
+
+	index = fmc_validate(fmc, &fwe_drv);
 	if (index < 0) {
 		pr_err("%s: refusing device \"%s\"\n", KBUILD_MODNAME,
 		       dev_name(dev));
--- a/drivers/fmc/fru-parse.c
+++ b/drivers/fmc/fru-parse.c
@ -31,12 +31,11 @@ static char *__fru_alloc_get_tl(struct fru_common_header *header, int nr)
 {
 	struct fru_type_length *tl;
 	char *res;
-	int len;

 	tl = __fru_get_board_tl(header, nr);
 	if (!tl)
 		return NULL;
-	len = fru_strlen(tl);
+
 	res = fru_alloc(fru_strlen(tl) + 1);
 	if (!res)
 		return NULL;
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@ -2,9 +2,7 @@
 # FPGA framework configuration
 #

-menu "FPGA Configuration Support"
-
-config FPGA
+menuconfig FPGA
 	tristate "FPGA Configuration Framework"
 	help
 	  Say Y here if you want support for configuring FPGAs from the
@ -26,6 +24,20 @@ config FPGA_MGR_ICE40_SPI
 	help
 	  FPGA manager driver support for Lattice iCE40 FPGAs over SPI.

+config FPGA_MGR_ALTERA_CVP
+	tristate "Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager"
+	depends on PCI
+	help
+	  FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V
+	  and Arria 10 Altera FPGAs using the CvP interface over PCIe.
+
+config FPGA_MGR_ALTERA_PS_SPI
+	tristate "Altera FPGA Passive Serial over SPI"
+	depends on SPI
+	help
+	  FPGA manager driver support for Altera Arria/Cyclone/Stratix
+	  using the passive serial interface over SPI.
+
 config FPGA_MGR_SOCFPGA
 	tristate "Altera SOCFPGA FPGA Manager"
 	depends on ARCH_SOCFPGA || COMPILE_TEST
@ -106,5 +118,3 @@ config XILINX_PR_DECOUPLER
 	  being reprogrammed during partial reconfig.

 endif # FPGA
-
-endmenu
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@ -6,6 +6,8 @@
 obj-$(CONFIG_FPGA)			+= fpga-mgr.o

 # FPGA Manager Drivers
+obj-$(CONFIG_FPGA_MGR_ALTERA_CVP)	+= altera-cvp.o
+obj-$(CONFIG_FPGA_MGR_ALTERA_PS_SPI)	+= altera-ps-spi.o
 obj-$(CONFIG_FPGA_MGR_ICE40_SPI)	+= ice40-spi.o
 obj-$(CONFIG_FPGA_MGR_SOCFPGA)		+= socfpga.o
 obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10)	+= socfpga-a10.o
--- a/drivers/fpga/altera-cvp.c
+++ b/drivers/fpga/altera-cvp.c
@ -0,0 +1,500 @@
+/*
+ * FPGA Manager Driver for Altera Arria/Cyclone/Stratix CvP
+ *
+ * Copyright (C) 2017 DENX Software Engineering
+ *
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Manage Altera FPGA firmware using PCIe CvP.
+ * Firmware must be in binary "rbf" format.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/sizes.h>
+
+#define CVP_BAR		0	/* BAR used for data transfer in memory mode */
+#define CVP_DUMMY_WR	244	/* dummy writes to clear CvP state machine */
+#define TIMEOUT_US	2000	/* CVP STATUS timeout for USERMODE polling */
+
+/* Vendor Specific Extended Capability Registers */
+#define VSE_PCIE_EXT_CAP_ID		0x200
+#define VSE_PCIE_EXT_CAP_ID_VAL		0x000b	/* 16bit */
+
+#define VSE_CVP_STATUS			0x21c	/* 32bit */
+#define VSE_CVP_STATUS_CFG_RDY		BIT(18)	/* CVP_CONFIG_READY */
+#define VSE_CVP_STATUS_CFG_ERR		BIT(19)	/* CVP_CONFIG_ERROR */
+#define VSE_CVP_STATUS_CVP_EN		BIT(20)	/* ctrl block is enabling CVP */
+#define VSE_CVP_STATUS_USERMODE		BIT(21)	/* USERMODE */
+#define VSE_CVP_STATUS_CFG_DONE		BIT(23)	/* CVP_CONFIG_DONE */
+#define VSE_CVP_STATUS_PLD_CLK_IN_USE	BIT(24)	/* PLD_CLK_IN_USE */
+
+#define VSE_CVP_MODE_CTRL		0x220	/* 32bit */
+#define VSE_CVP_MODE_CTRL_CVP_MODE	BIT(0)	/* CVP (1) or normal mode (0) */
+#define VSE_CVP_MODE_CTRL_HIP_CLK_SEL	BIT(1) /* PMA (1) or fabric clock (0) */
+#define VSE_CVP_MODE_CTRL_NUMCLKS_OFF	8	/* NUMCLKS bits offset */
+#define VSE_CVP_MODE_CTRL_NUMCLKS_MASK	GENMASK(15, 8)
+
+#define VSE_CVP_DATA			0x228	/* 32bit */
+#define VSE_CVP_PROG_CTRL		0x22c	/* 32bit */
+#define VSE_CVP_PROG_CTRL_CONFIG	BIT(0)
+#define VSE_CVP_PROG_CTRL_START_XFER	BIT(1)
+
+#define VSE_UNCOR_ERR_STATUS		0x234	/* 32bit */
+#define VSE_UNCOR_ERR_CVP_CFG_ERR	BIT(5)	/* CVP_CONFIG_ERROR_LATCHED */
+
+#define DRV_NAME		"altera-cvp"
+#define ALTERA_CVP_MGR_NAME	"Altera CvP FPGA Manager"
+
+/* Optional CvP config error status check for debugging */
+static bool altera_cvp_chkcfg;
+
+struct altera_cvp_conf {
+	struct fpga_manager	*mgr;
+	struct pci_dev		*pci_dev;
+	void __iomem		*map;
+	void			(*write_data)(struct altera_cvp_conf *, u32);
+	char			mgr_name[64];
+	u8			numclks;
+};
+
+static enum fpga_mgr_states altera_cvp_state(struct fpga_manager *mgr)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	u32 status;
+
+	pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &status);
+
+	if (status & VSE_CVP_STATUS_CFG_DONE)
+		return FPGA_MGR_STATE_OPERATING;
+
+	if (status & VSE_CVP_STATUS_CVP_EN)
+		return FPGA_MGR_STATE_POWER_UP;
+
+	return FPGA_MGR_STATE_UNKNOWN;
+}
+
+static void altera_cvp_write_data_iomem(struct altera_cvp_conf *conf, u32 val)
+{
+	writel(val, conf->map);
+}
+
+static void altera_cvp_write_data_config(struct altera_cvp_conf *conf, u32 val)
+{
+	pci_write_config_dword(conf->pci_dev, VSE_CVP_DATA, val);
+}
+
+/* switches between CvP clock and internal clock */
+static void altera_cvp_dummy_write(struct altera_cvp_conf *conf)
+{
+	unsigned int i;
+	u32 val;
+
+	/* set 1 CVP clock cycle for every CVP Data Register Write */
+	pci_read_config_dword(conf->pci_dev, VSE_CVP_MODE_CTRL, &val);
+	val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
+	val |= 1 << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
+	pci_write_config_dword(conf->pci_dev, VSE_CVP_MODE_CTRL, val);
+
+	for (i = 0; i < CVP_DUMMY_WR; i++)
+		conf->write_data(conf, 0); /* dummy data, could be any value */
+}
+
+static int altera_cvp_wait_status(struct altera_cvp_conf *conf, u32 status_mask,
+				  u32 status_val, int timeout_us)
+{
+	unsigned int retries;
+	u32 val;
+
+	retries = timeout_us / 10;
+	if (timeout_us % 10)
+		retries++;
+
+	do {
+		pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &val);
+		if ((val & status_mask) == status_val)
+			return 0;
+
+		/* use small usleep value to re-check and break early */
+		usleep_range(10, 11);
+	} while (--retries);
+
+	return -ETIMEDOUT;
+}
+
+static int altera_cvp_teardown(struct fpga_manager *mgr,
+			       struct fpga_image_info *info)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	struct pci_dev *pdev = conf->pci_dev;
+	int ret;
+	u32 val;
+
+	/* STEP 12 - reset START_XFER bit */
+	pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
+	val &= ~VSE_CVP_PROG_CTRL_START_XFER;
+	pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+
+	/* STEP 13 - reset CVP_CONFIG bit */
+	val &= ~VSE_CVP_PROG_CTRL_CONFIG;
+	pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+
+	/*
+	 * STEP 14
+	 * - set CVP_NUMCLKS to 1 and then issue CVP_DUMMY_WR dummy
+	 *   writes to the HIP
+	 */
+	altera_cvp_dummy_write(conf); /* from CVP clock to internal clock */
+
+	/* STEP 15 - poll CVP_CONFIG_READY bit for 0 with 10us timeout */
+	ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0, 10);
+	if (ret)
+		dev_err(&mgr->dev, "CFG_RDY == 0 timeout\n");
+
+	return ret;
+}
+
+static int altera_cvp_write_init(struct fpga_manager *mgr,
+				 struct fpga_image_info *info,
+				 const char *buf, size_t count)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	struct pci_dev *pdev = conf->pci_dev;
+	u32 iflags, val;
+	int ret;
+
+	iflags = info ? info->flags : 0;
+
+	if (iflags & FPGA_MGR_PARTIAL_RECONFIG) {
+		dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
+		return -EINVAL;
+	}
+
+	/* Determine allowed clock to data ratio */
+	if (iflags & FPGA_MGR_COMPRESSED_BITSTREAM)
+		conf->numclks = 8; /* ratio for all compressed images */
+	else if (iflags & FPGA_MGR_ENCRYPTED_BITSTREAM)
+		conf->numclks = 4; /* for uncompressed and encrypted images */
+	else
+		conf->numclks = 1; /* for uncompressed and unencrypted images */
+
+	/* STEP 1 - read CVP status and check CVP_EN flag */
+	pci_read_config_dword(pdev, VSE_CVP_STATUS, &val);
+	if (!(val & VSE_CVP_STATUS_CVP_EN)) {
+		dev_err(&mgr->dev, "CVP mode off: 0x%04x\n", val);
+		return -ENODEV;
+	}
+
+	if (val & VSE_CVP_STATUS_CFG_RDY) {
+		dev_warn(&mgr->dev, "CvP already started, teardown first\n");
+		ret = altera_cvp_teardown(mgr, info);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * STEP 2
+	 * - set HIP_CLK_SEL and CVP_MODE (must be set in the order mentioned)
+	 */
+	/* switch from fabric to PMA clock */
+	pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+	val |= VSE_CVP_MODE_CTRL_HIP_CLK_SEL;
+	pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+
+	/* set CVP mode */
+	pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+	val |= VSE_CVP_MODE_CTRL_CVP_MODE;
+	pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+
+	/*
+	 * STEP 3
+	 * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
+	 */
+	altera_cvp_dummy_write(conf);
+
+	/* STEP 4 - set CVP_CONFIG bit */
+	pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
+	/* request control block to begin transfer using CVP */
+	val |= VSE_CVP_PROG_CTRL_CONFIG;
+	pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+
+	/* STEP 5 - poll CVP_CONFIG READY for 1 with 10us timeout */
+	ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY,
+				     VSE_CVP_STATUS_CFG_RDY, 10);
+	if (ret) {
+		dev_warn(&mgr->dev, "CFG_RDY == 1 timeout\n");
+		return ret;
+	}
+
+	/*
+	 * STEP 6
+	 * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
+	 */
+	altera_cvp_dummy_write(conf);
+
+	/* STEP 7 - set START_XFER */
+	pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
+	val |= VSE_CVP_PROG_CTRL_START_XFER;
+	pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+
+	/* STEP 8 - start transfer (set CVP_NUMCLKS for bitstream) */
+	pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+	val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
+	val |= conf->numclks << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
+	pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+
+	return 0;
+}
+
+static inline int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	u32 val;
+
+	/* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
+	pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &val);
+	if (val & VSE_CVP_STATUS_CFG_ERR) {
+		dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
+			bytes);
+		return -EPROTO;
+	}
+	return 0;
+}
+
+static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
+			    size_t count)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	const u32 *data;
+	size_t done, remaining;
+	int status = 0;
+	u32 mask;
+
+	/* STEP 9 - write 32-bit data from RBF file to CVP data register */
+	data = (u32 *)buf;
+	remaining = count;
+	done = 0;
+
+	while (remaining >= 4) {
+		conf->write_data(conf, *data++);
+		done += 4;
+		remaining -= 4;
+
+		/*
+		 * STEP 10 (optional) and STEP 11
+		 * - check error flag
+		 * - loop until data transfer completed
+		 * Config images can be huge (more than 40 MiB), so
+		 * only check after a new 4k data block has been written.
+		 * This reduces the number of checks and speeds up the
+		 * configuration process.
+		 */
+		if (altera_cvp_chkcfg && !(done % SZ_4K)) {
+			status = altera_cvp_chk_error(mgr, done);
+			if (status < 0)
+				return status;
+		}
+	}
+
+	/* write up to 3 trailing bytes, if any */
+	mask = BIT(remaining * 8) - 1;
+	if (mask)
+		conf->write_data(conf, *data & mask);
+
+	if (altera_cvp_chkcfg)
+		status = altera_cvp_chk_error(mgr, count);
+
+	return status;
+}
+
+static int altera_cvp_write_complete(struct fpga_manager *mgr,
+				     struct fpga_image_info *info)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	struct pci_dev *pdev = conf->pci_dev;
+	int ret;
+	u32 mask;
+	u32 val;
+
+	ret = altera_cvp_teardown(mgr, info);
+	if (ret)
+		return ret;
+
+	/* STEP 16 - check CVP_CONFIG_ERROR_LATCHED bit */
+	pci_read_config_dword(pdev, VSE_UNCOR_ERR_STATUS, &val);
+	if (val & VSE_UNCOR_ERR_CVP_CFG_ERR) {
+		dev_err(&mgr->dev, "detected CVP_CONFIG_ERROR_LATCHED!\n");
+		return -EPROTO;
+	}
+
+	/* STEP 17 - reset CVP_MODE and HIP_CLK_SEL bit */
+	pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+	val &= ~VSE_CVP_MODE_CTRL_HIP_CLK_SEL;
+	val &= ~VSE_CVP_MODE_CTRL_CVP_MODE;
+	pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+
+	/* STEP 18 - poll PLD_CLK_IN_USE and USER_MODE bits */
+	mask = VSE_CVP_STATUS_PLD_CLK_IN_USE | VSE_CVP_STATUS_USERMODE;
+	ret = altera_cvp_wait_status(conf, mask, mask, TIMEOUT_US);
+	if (ret)
+		dev_err(&mgr->dev, "PLD_CLK_IN_USE|USERMODE timeout\n");
+
+	return ret;
+}
+
+static const struct fpga_manager_ops altera_cvp_ops = {
+	.state		= altera_cvp_state,
+	.write_init	= altera_cvp_write_init,
+	.write		= altera_cvp_write,
+	.write_complete	= altera_cvp_write_complete,
+};
+
+static ssize_t show_chkcfg(struct device_driver *dev, char *buf)
+{
+	return snprintf(buf, 3, "%d\n", altera_cvp_chkcfg);
+}
+
+static ssize_t store_chkcfg(struct device_driver *drv, const char *buf,
+			    size_t count)
+{
+	int ret;
+
+	ret = kstrtobool(buf, &altera_cvp_chkcfg);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static DRIVER_ATTR(chkcfg, 0600, show_chkcfg, store_chkcfg);
+
+static int altera_cvp_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *dev_id);
+static void altera_cvp_remove(struct pci_dev *pdev);
+
+#define PCI_VENDOR_ID_ALTERA	0x1172
+
+static struct pci_device_id altera_cvp_id_tbl[] = {
+	{ PCI_VDEVICE(ALTERA, PCI_ANY_ID) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, altera_cvp_id_tbl);
+
+static struct pci_driver altera_cvp_driver = {
+	.name   = DRV_NAME,
+	.id_table = altera_cvp_id_tbl,
+	.probe  = altera_cvp_probe,
+	.remove = altera_cvp_remove,
+};
+
+static int altera_cvp_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *dev_id)
+{
+	struct altera_cvp_conf *conf;
+	u16 cmd, val;
+	int ret;
+
+	/*
+	 * First check if this is the expected FPGA device. PCI config
+	 * space access works without enabling the PCI device, memory
+	 * space access is enabled further down.
+	 */
+	pci_read_config_word(pdev, VSE_PCIE_EXT_CAP_ID, &val);
+	if (val != VSE_PCIE_EXT_CAP_ID_VAL) {
+		dev_err(&pdev->dev, "Wrong EXT_CAP_ID value 0x%x\n", val);
+		return -ENODEV;
+	}
+
+	conf = devm_kzalloc(&pdev->dev, sizeof(*conf), GFP_KERNEL);
+	if (!conf)
+		return -ENOMEM;
+
+	/*
+	 * Enable memory BAR access. We cannot use pci_enable_device() here
+	 * because it will make the driver unusable with FPGA devices that
+	 * have additional big IOMEM resources (e.g. 4GiB BARs) on 32-bit
+	 * platform. Such BARs will not have an assigned address range and
+	 * pci_enable_device() will fail, complaining about not claimed BAR,
+	 * even if the concerned BAR is not needed for FPGA configuration
+	 * at all. Thus, enable the device via PCI config space command.
+	 */
+	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+	if (!(cmd & PCI_COMMAND_MEMORY)) {
+		cmd |= PCI_COMMAND_MEMORY;
+		pci_write_config_word(pdev, PCI_COMMAND, cmd);
+	}
+
+	ret = pci_request_region(pdev, CVP_BAR, "CVP");
+	if (ret) {
+		dev_err(&pdev->dev, "Requesting CVP BAR region failed\n");
+		goto err_disable;
+	}
+
+	conf->pci_dev = pdev;
+	conf->write_data = altera_cvp_write_data_iomem;
+
+	conf->map = pci_iomap(pdev, CVP_BAR, 0);
+	if (!conf->map) {
+		dev_warn(&pdev->dev, "Mapping CVP BAR failed\n");
+		conf->write_data = altera_cvp_write_data_config;
+	}
+
+	snprintf(conf->mgr_name, sizeof(conf->mgr_name), "%s @%s",
+		 ALTERA_CVP_MGR_NAME, pci_name(pdev));
+
+	ret = fpga_mgr_register(&pdev->dev, conf->mgr_name,
+				&altera_cvp_ops, conf);
+	if (ret)
+		goto err_unmap;
+
+	ret = driver_create_file(&altera_cvp_driver.driver,
+				 &driver_attr_chkcfg);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't create sysfs chkcfg file\n");
+		fpga_mgr_unregister(&pdev->dev);
+		goto err_unmap;
+	}
+
+	return 0;
+
+err_unmap:
+	pci_iounmap(pdev, conf->map);
+	pci_release_region(pdev, CVP_BAR);
+err_disable:
+	cmd &= ~PCI_COMMAND_MEMORY;
+	pci_write_config_word(pdev, PCI_COMMAND, cmd);
+	return ret;
+}
+
+static void altera_cvp_remove(struct pci_dev *pdev)
+{
+	struct fpga_manager *mgr = pci_get_drvdata(pdev);
+	struct altera_cvp_conf *conf = mgr->priv;
+	u16 cmd;
+
+	driver_remove_file(&altera_cvp_driver.driver, &driver_attr_chkcfg);
+	fpga_mgr_unregister(&pdev->dev);
+	pci_iounmap(pdev, conf->map);
+	pci_release_region(pdev, CVP_BAR);
+	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+	cmd &= ~PCI_COMMAND_MEMORY;
+	pci_write_config_word(pdev, PCI_COMMAND, cmd);
+}
+
+module_pci_driver(altera_cvp_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
+MODULE_DESCRIPTION("Module to load Altera FPGA over CvP");
--- a/drivers/fpga/altera-hps2fpga.c
+++ b/drivers/fpga/altera-hps2fpga.c
@ -66,7 +66,7 @@ static int alt_hps2fpga_enable_show(struct fpga_bridge *bridge)

 /* The L3 REMAP register is write only, so keep a cached value. */
 static unsigned int l3_remap_shadow;
-static spinlock_t l3_remap_lock;
+static DEFINE_SPINLOCK(l3_remap_lock);

 static int _alt_hps2fpga_enable_set(struct altera_hps2fpga_data *priv,
 				    bool enable)
@ -143,9 +143,15 @@ static int alt_fpga_bridge_probe(struct platform_device *pdev)
 	int ret;

 	of_id = of_match_device(altera_fpga_of_match, dev);
+	if (!of_id) {
+		dev_err(dev, "failed to match device\n");
+		return -ENODEV;
+	}
+
 	priv = (struct altera_hps2fpga_data *)of_id->data;

-	priv->bridge_reset = of_reset_control_get_by_index(dev->of_node, 0);
+	priv->bridge_reset = of_reset_control_get_exclusive_by_index(dev->of_node,
+								     0);
 	if (IS_ERR(priv->bridge_reset)) {
 		dev_err(dev, "Could not get %s reset control\n", priv->name);
 		return PTR_ERR(priv->bridge_reset);
@ -171,8 +177,6 @@ static int alt_fpga_bridge_probe(struct platform_device *pdev)
 		return -EBUSY;
 	}

-	spin_lock_init(&l3_remap_lock);
-
 	if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) {
 		if (enable > 1) {
 			dev_warn(dev, "invalid bridge-enable %u > 1\n", enable);
--- a/drivers/fpga/altera-ps-spi.c
+++ b/drivers/fpga/altera-ps-spi.c
@ -0,0 +1,308 @@
+/*
+ * Altera Passive Serial SPI Driver
+ *
+ *  Copyright (c) 2017 United Western Technologies, Corporation
+ *
+ *  Joshua Clayton <stillcompiling@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * Manage Altera FPGA firmware that is loaded over SPI using the passive
+ * serial configuration method.
+ * Firmware must be in binary "rbf" format.
+ * Works on Arria 10, Cyclone V and Stratix V. Should work on Cyclone series.
+ * May work on other Altera FPGAs.
+ */
+
+#include <linux/bitrev.h>
+#include <linux/delay.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/of_device.h>
+#include <linux/spi/spi.h>
+#include <linux/sizes.h>
+
+enum altera_ps_devtype {
+	CYCLONE5,
+	ARRIA10,
+};
+
+struct altera_ps_data {
+	enum altera_ps_devtype devtype;
+	int status_wait_min_us;
+	int status_wait_max_us;
+	int t_cfg_us;
+	int t_st2ck_us;
+};
+
+struct altera_ps_conf {
+	struct gpio_desc *config;
+	struct gpio_desc *confd;
+	struct gpio_desc *status;
+	struct spi_device *spi;
+	const struct altera_ps_data *data;
+	u32 info_flags;
+	char mgr_name[64];
+};
+
+/*          |   Arria 10  |   Cyclone5  |   Stratix5  |
+ * t_CF2ST0 |     [; 600] |     [; 600] |     [; 600] |ns
+ * t_CFG    |        [2;] |        [2;] |        [2;] |µs
+ * t_STATUS | [268; 3000] | [268; 1506] | [268; 1506] |µs
+ * t_CF2ST1 |    [; 3000] |    [; 1506] |    [; 1506] |µs
+ * t_CF2CK  |     [3010;] |     [1506;] |     [1506;] |µs
+ * t_ST2CK  |       [10;] |        [2;] |        [2;] |µs
+ * t_CD2UM  |  [175; 830] |  [175; 437] |  [175; 437] |µs
+ */
+static struct altera_ps_data c5_data = {
+	/* these values for Cyclone5 are compatible with Stratix5 */
+	.devtype = CYCLONE5,
+	.status_wait_min_us = 268,
+	.status_wait_max_us = 1506,
+	.t_cfg_us = 2,
+	.t_st2ck_us = 2,
+};
+
+static struct altera_ps_data a10_data = {
+	.devtype = ARRIA10,
+	.status_wait_min_us = 268,  /* min(t_STATUS) */
+	.status_wait_max_us = 3000, /* max(t_CF2ST1) */
+	.t_cfg_us = 2,    /* max { min(t_CFG), max(tCF2ST0) } */
+	.t_st2ck_us = 10, /* min(t_ST2CK) */
+};
+
+static const struct of_device_id of_ef_match[] = {
+	{ .compatible = "altr,fpga-passive-serial", .data = &c5_data },
+	{ .compatible = "altr,fpga-arria10-passive-serial", .data = &a10_data },
+	{}
+};
+MODULE_DEVICE_TABLE(of, of_ef_match);
+
+static enum fpga_mgr_states altera_ps_state(struct fpga_manager *mgr)
+{
+	struct altera_ps_conf *conf = mgr->priv;
+
+	if (gpiod_get_value_cansleep(conf->status))
+		return FPGA_MGR_STATE_RESET;
+
+	return FPGA_MGR_STATE_UNKNOWN;
+}
+
+static inline void altera_ps_delay(int delay_us)
+{
+	if (delay_us > 10)
+		usleep_range(delay_us, delay_us + 5);
+	else
+		udelay(delay_us);
+}
+
+static int altera_ps_write_init(struct fpga_manager *mgr,
+				struct fpga_image_info *info,
+				const char *buf, size_t count)
+{
+	struct altera_ps_conf *conf = mgr->priv;
+	int min, max, waits;
+	int i;
+
+	conf->info_flags = info->flags;
+
+	if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
+		dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
+		return -EINVAL;
+	}
+
+	gpiod_set_value_cansleep(conf->config, 1);
+
+	/* wait min reset pulse time */
+	altera_ps_delay(conf->data->t_cfg_us);
+
+	if (!gpiod_get_value_cansleep(conf->status)) {
+		dev_err(&mgr->dev, "Status pin failed to show a reset\n");
+		return -EIO;
+	}
+
+	gpiod_set_value_cansleep(conf->config, 0);
+
+	min = conf->data->status_wait_min_us;
+	max = conf->data->status_wait_max_us;
+	waits = max / min;
+	if (max % min)
+		waits++;
+
+	/* wait for max { max(t_STATUS), max(t_CF2ST1) } */
+	for (i = 0; i < waits; i++) {
+		usleep_range(min, min + 10);
+		if (!gpiod_get_value_cansleep(conf->status)) {
+			/* wait for min(t_ST2CK)*/
+			altera_ps_delay(conf->data->t_st2ck_us);
+			return 0;
+		}
+	}
+
+	dev_err(&mgr->dev, "Status pin not ready.\n");
+	return -EIO;
+}
+
+static void rev_buf(char *buf, size_t len)
+{
+	u32 *fw32 = (u32 *)buf;
+	size_t extra_bytes = (len & 0x03);
+	const u32 *fw_end = (u32 *)(buf + len - extra_bytes);
+
+	/* set buffer to lsb first */
+	while (fw32 < fw_end) {
+		*fw32 = bitrev8x4(*fw32);
+		fw32++;
+	}
+
+	if (extra_bytes) {
+		buf = (char *)fw_end;
+		while (extra_bytes) {
+			*buf = bitrev8(*buf);
+			buf++;
+			extra_bytes--;
+		}
+	}
+}
+
+static int altera_ps_write(struct fpga_manager *mgr, const char *buf,
+			   size_t count)
+{
+	struct altera_ps_conf *conf = mgr->priv;
+	const char *fw_data = buf;
+	const char *fw_data_end = fw_data + count;
+
+	while (fw_data < fw_data_end) {
+		int ret;
+		size_t stride = min_t(size_t, fw_data_end - fw_data, SZ_4K);
+
+		if (!(conf->info_flags & FPGA_MGR_BITSTREAM_LSB_FIRST))
+			rev_buf((char *)fw_data, stride);
+
+		ret = spi_write(conf->spi, fw_data, stride);
+		if (ret) {
+			dev_err(&mgr->dev, "spi error in firmware write: %d\n",
+				ret);
+			return ret;
+		}
+		fw_data += stride;
+	}
+
+	return 0;
+}
+
+static int altera_ps_write_complete(struct fpga_manager *mgr,
+				    struct fpga_image_info *info)
+{
+	struct altera_ps_conf *conf = mgr->priv;
+	const char dummy[] = {0};
+	int ret;
+
+	if (gpiod_get_value_cansleep(conf->status)) {
+		dev_err(&mgr->dev, "Error during configuration.\n");
+		return -EIO;
+	}
+
+	if (!IS_ERR(conf->confd)) {
+		if (!gpiod_get_raw_value_cansleep(conf->confd)) {
+			dev_err(&mgr->dev, "CONF_DONE is inactive!\n");
+			return -EIO;
+		}
+	}
+
+	/*
+	 * After CONF_DONE goes high, send two additional falling edges on DCLK
+	 * to begin initialization and enter user mode
+	 */
+	ret = spi_write(conf->spi, dummy, 1);
+	if (ret) {
+		dev_err(&mgr->dev, "spi error during end sequence: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct fpga_manager_ops altera_ps_ops = {
+	.state = altera_ps_state,
+	.write_init = altera_ps_write_init,
+	.write = altera_ps_write,
+	.write_complete = altera_ps_write_complete,
+};
+
+static int altera_ps_probe(struct spi_device *spi)
+{
+	struct altera_ps_conf *conf;
+	const struct of_device_id *of_id;
+
+	conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL);
+	if (!conf)
+		return -ENOMEM;
+
+	of_id = of_match_device(of_ef_match, &spi->dev);
+	if (!of_id)
+		return -ENODEV;
+
+	conf->data = of_id->data;
+	conf->spi = spi;
+	conf->config = devm_gpiod_get(&spi->dev, "nconfig", GPIOD_OUT_HIGH);
+	if (IS_ERR(conf->config)) {
+		dev_err(&spi->dev, "Failed to get config gpio: %ld\n",
+			PTR_ERR(conf->config));
+		return PTR_ERR(conf->config);
+	}
+
+	conf->status = devm_gpiod_get(&spi->dev, "nstat", GPIOD_IN);
+	if (IS_ERR(conf->status)) {
+		dev_err(&spi->dev, "Failed to get status gpio: %ld\n",
+			PTR_ERR(conf->status));
+		return PTR_ERR(conf->status);
+	}
+
+	conf->confd = devm_gpiod_get(&spi->dev, "confd", GPIOD_IN);
+	if (IS_ERR(conf->confd)) {
+		dev_warn(&spi->dev, "Not using confd gpio: %ld\n",
+			 PTR_ERR(conf->confd));
+	}
+
+	/* Register manager with unique name */
+	snprintf(conf->mgr_name, sizeof(conf->mgr_name), "%s %s",
+		 dev_driver_string(&spi->dev), dev_name(&spi->dev));
+
+	return fpga_mgr_register(&spi->dev, conf->mgr_name,
+				 &altera_ps_ops, conf);
+}
+
+static int altera_ps_remove(struct spi_device *spi)
+{
+	fpga_mgr_unregister(&spi->dev);
+
+	return 0;
+}
+
+static const struct spi_device_id altera_ps_spi_ids[] = {
+	{"cyclone-ps-spi", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, altera_ps_spi_ids);
+
+static struct spi_driver altera_ps_driver = {
+	.driver = {
+		.name = "altera-ps-spi",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(of_ef_match),
+	},
+	.id_table = altera_ps_spi_ids,
+	.probe = altera_ps_probe,
+	.remove = altera_ps_remove,
+};
+
+module_spi_driver(altera_ps_driver)
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Joshua Clayton <stillcompiling@gmail.com>");
+MODULE_DESCRIPTION("Module to load Altera FPGA firmware over SPI");
--- a/drivers/fpga/fpga-region.c
+++ b/drivers/fpga/fpga-region.c
@ -319,8 +319,8 @@ static int child_regions_with_firmware(struct device_node *overlay)
 	of_node_put(child_region);

 	if (ret)
-		pr_err("firmware-name not allowed in child FPGA region: %s",
-		       child_region->full_name);
+		pr_err("firmware-name not allowed in child FPGA region: %pOF",
+		       child_region);

 	return ret;
 }
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@ -475,7 +475,7 @@ static ssize_t fsi_slave_sysfs_raw_write(struct file *file,
 	return count;
 }

-static struct bin_attribute fsi_slave_raw_attr = {
+static const struct bin_attribute fsi_slave_raw_attr = {
 	.attr = {
 		.name = "raw",
 		.mode = 0600,
@ -499,7 +499,7 @@ static ssize_t fsi_slave_sysfs_term_write(struct file *file,
 	return count;
 }

-static struct bin_attribute fsi_slave_term_attr = {
+static const struct bin_attribute fsi_slave_term_attr = {
 	.attr = {
 		.name = "term",
 		.mode = 0200,
--- a/drivers/fsi/fsi-scom.c
+++ b/drivers/fsi/fsi-scom.c
@ -57,12 +57,6 @@ static int put_scom(struct scom_device *scom_dev, uint64_t value,
 	int rc;
 	uint32_t data;

-	data = cpu_to_be32(SCOM_RESET_CMD);
-	rc = fsi_device_write(scom_dev->fsi_dev, SCOM_RESET_REG, &data,
-				sizeof(uint32_t));
-	if (rc)
-		return rc;
-
 	data = cpu_to_be32((value >> 32) & 0xffffffff);
 	rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA0_REG, &data,
 				sizeof(uint32_t));
@ -186,6 +180,7 @@ static const struct file_operations scom_fops = {

 static int scom_probe(struct device *dev)
 {
+	uint32_t data;
 	struct fsi_device *fsi_dev = to_fsi_dev(dev);
 	struct scom_device *scom;

@ -202,6 +197,9 @@ static int scom_probe(struct device *dev)
 	scom->mdev.parent = dev;
 	list_add(&scom->link, &scom_devices);

+	data = cpu_to_be32(SCOM_RESET_CMD);
+	fsi_device_write(fsi_dev, SCOM_RESET_REG, &data, sizeof(uint32_t));
+
 	return misc_register(&scom->mdev);
 }

--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@ -177,6 +177,11 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size,
 		      &vmbus_connection.chn_msg_list);
 	spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);

+	if (newchannel->rescind) {
+		err = -ENODEV;
+		goto error_free_gpadl;
+	}
+
 	ret = vmbus_post_msg(open_msg,
 			     sizeof(struct vmbus_channel_open_channel), true);

@ -421,6 +426,11 @@ int vmbus_establish_gpadl(struct vmbus_channel *channel, void *kbuffer,

 	spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);

+	if (channel->rescind) {
+		ret = -ENODEV;
+		goto cleanup;
+	}
+
 	ret = vmbus_post_msg(gpadlmsg, msginfo->msgsize -
 			     sizeof(*msginfo), true);
 	if (ret != 0)
@ -494,6 +504,10 @@ int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle)
 	list_add_tail(&info->msglistentry,
 		      &vmbus_connection.chn_msg_list);
 	spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);
+
+	if (channel->rescind)
+		goto post_msg_err;
+
 	ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_gpadl_teardown),
 			     true);

--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@ -451,6 +451,12 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel)
 	/* Make sure this is a new offer */
 	mutex_lock(&vmbus_connection.channel_mutex);

+	/*
+	 * Now that we have acquired the channel_mutex,
+	 * we can release the potentially racing rescind thread.
+	 */
+	atomic_dec(&vmbus_connection.offer_in_progress);
+
 	list_for_each_entry(channel, &vmbus_connection.chn_list, listentry) {
 		if (!uuid_le_cmp(channel->offermsg.offer.if_type,
 			newchannel->offermsg.offer.if_type) &&
@ -481,7 +487,6 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel)
 			channel->num_sc++;
 			spin_unlock_irqrestore(&channel->lock, flags);
 		} else {
-			atomic_dec(&vmbus_connection.offer_in_progress);
 			goto err_free_chan;
 		}
 	}
@ -510,7 +515,6 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel)
 	if (!fnew) {
 		if (channel->sc_creation_callback != NULL)
 			channel->sc_creation_callback(newchannel);
-		atomic_dec(&vmbus_connection.offer_in_progress);
 		return;
 	}

@ -541,7 +545,7 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel)
 		goto err_deq_chan;
 	}

-	atomic_dec(&vmbus_connection.offer_in_progress);
+	newchannel->probe_done = true;
 	return;

 err_deq_chan:
@ -882,8 +886,27 @@ static void vmbus_onoffer_rescind(struct vmbus_channel_message_header *hdr)
 	channel->rescind = true;
 	spin_unlock_irqrestore(&channel->lock, flags);

+	/*
+	 * Now that we have posted the rescind state, perform
+	 * rescind related cleanup.
+	 */
 	vmbus_rescind_cleanup(channel);

+	/*
+	 * Now wait for offer handling to complete.
+	 */
+	while (READ_ONCE(channel->probe_done) == false) {
+		/*
+		 * We wait here until any channel offer is currently
+		 * being processed.
+		 */
+		msleep(1);
+	}
+
+	/*
+	 * At this point, the rescind handling can proceed safely.
+	 */
+
 	if (channel->device_obj) {
 		if (channel->chn_rescind_callback) {
 			channel->chn_rescind_callback(channel);
--- a/drivers/hv/hv_balloon.c
+++ b/drivers/hv/hv_balloon.c
@ -584,10 +584,6 @@ static int hv_memory_notifier(struct notifier_block *nb, unsigned long val,

 	switch (val) {
 	case MEM_ONLINE:
-		spin_lock_irqsave(&dm_device.ha_lock, flags);
-		dm_device.num_pages_onlined += mem->nr_pages;
-		spin_unlock_irqrestore(&dm_device.ha_lock, flags);
-		/* Fall through */
 	case MEM_CANCEL_ONLINE:
 		if (dm_device.ha_waiting) {
 			dm_device.ha_waiting = false;
@ -644,6 +640,9 @@ static void hv_page_online_one(struct hv_hotadd_state *has, struct page *pg)
 	__online_page_set_limits(pg);
 	__online_page_increment_counters(pg);
 	__online_page_free(pg);
+
+	WARN_ON_ONCE(!spin_is_locked(&dm_device.ha_lock));
+	dm_device.num_pages_onlined++;
 }

 static void hv_bring_pgs_online(struct hv_hotadd_state *has,
@ -1036,8 +1035,8 @@ static void process_info(struct hv_dynmem_device *dm, struct dm_info_msg *msg)
 		if (info_hdr->data_size == sizeof(__u64)) {
 			__u64 *max_page_count = (__u64 *)&info_hdr[1];

-			pr_info("INFO_TYPE_MAX_PAGE_CNT = %llu\n",
-				*max_page_count);
+			pr_info("Max. dynamic memory size: %llu MB\n",
+				(*max_page_count) >> (20 - PAGE_SHIFT));
 		}

 		break;
@ -1656,6 +1655,7 @@ static int balloon_probe(struct hv_device *dev,
 	}

 	dm_device.state = DM_INITIALIZED;
+	last_post_time = jiffies;

 	return 0;

--- a/drivers/hv/hv_kvp.c
+++ b/drivers/hv/hv_kvp.c
@ -304,7 +304,7 @@ static int process_ob_ipinfo(void *in_msg, void *out_msg, int op)
 				strlen((char *)in->body.kvp_ip_val.adapter_id),
 				UTF16_HOST_ENDIAN,
 				(wchar_t *)out->kvp_ip_val.adapter_id,
-				MAX_IP_ADDR_SIZE);
+				MAX_ADAPTER_ID_SIZE);
 		if (len < 0)
 			return len;

--- a/drivers/hv/ring_buffer.c
+++ b/drivers/hv/ring_buffer.c
@ -29,6 +29,7 @@
 #include <linux/uio.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/prefetch.h>

 #include "hyperv_vmbus.h"

@ -94,30 +95,6 @@ hv_set_next_write_location(struct hv_ring_buffer_info *ring_info,
 	ring_info->ring_buffer->write_index = next_write_location;
 }

-/* Get the next read location for the specified ring buffer. */
-static inline u32
-hv_get_next_read_location(const struct hv_ring_buffer_info *ring_info)
-{
-	return ring_info->ring_buffer->read_index;
-}
-
-/*
- * Get the next read location + offset for the specified ring buffer.
- * This allows the caller to skip.
- */
-static inline u32
-hv_get_next_readlocation_withoffset(const struct hv_ring_buffer_info *ring_info,
-				    u32 offset)
-{
-	u32 next = ring_info->ring_buffer->read_index;
-
-	next += offset;
-	if (next >= ring_info->ring_datasize)
-		next -= ring_info->ring_datasize;
-
-	return next;
-}
-
 /* Set the next read location for the specified ring buffer. */
 static inline void
 hv_set_next_read_location(struct hv_ring_buffer_info *ring_info,
@ -141,29 +118,6 @@ hv_get_ring_bufferindices(struct hv_ring_buffer_info *ring_info)
 	return (u64)ring_info->ring_buffer->write_index << 32;
 }

-/*
- * Helper routine to copy to source from ring buffer.
- * Assume there is enough room. Handles wrap-around in src case only!!
- */
-static u32 hv_copyfrom_ringbuffer(
-	const struct hv_ring_buffer_info *ring_info,
-	void				*dest,
-	u32				destlen,
-	u32				start_read_offset)
-{
-	void *ring_buffer = hv_get_ring_buffer(ring_info);
-	u32 ring_buffer_size = hv_get_ring_buffersize(ring_info);
-
-	memcpy(dest, ring_buffer + start_read_offset, destlen);
-
-	start_read_offset += destlen;
-	if (start_read_offset >= ring_buffer_size)
-		start_read_offset -= ring_buffer_size;
-
-	return start_read_offset;
-}
-
-
 /*
 * Helper routine to copy from source to ring buffer.
 * Assume there is enough room. Handles wrap-around in dest case only!!
@ -334,33 +288,22 @@ int hv_ringbuffer_write(struct vmbus_channel *channel,
 	return 0;
 }

-static inline void
-init_cached_read_index(struct hv_ring_buffer_info *rbi)
-{
-	rbi->cached_read_index = rbi->ring_buffer->read_index;
-}
-
 int hv_ringbuffer_read(struct vmbus_channel *channel,
 		       void *buffer, u32 buflen, u32 *buffer_actual_len,
 		       u64 *requestid, bool raw)
 {
-	u32 bytes_avail_toread;
-	u32 next_read_location;
-	u64 prev_indices = 0;
-	struct vmpacket_descriptor desc;
-	u32 offset;
-	u32 packetlen;
-	struct hv_ring_buffer_info *inring_info = &channel->inbound;
+	struct vmpacket_descriptor *desc;
+	u32 packetlen, offset;

-	if (buflen <= 0)
+	if (unlikely(buflen == 0))
 		return -EINVAL;

 	*buffer_actual_len = 0;
 	*requestid = 0;

-	bytes_avail_toread = hv_get_bytes_to_read(inring_info);
 	/* Make sure there is something to read */
-	if (bytes_avail_toread < sizeof(desc)) {
+	desc = hv_pkt_iter_first(channel);
+	if (desc == NULL) {
 		/*
 		 * No error is set when there is even no header, drivers are
 		 * supposed to analyze buffer_actual_len.
@ -368,48 +311,22 @@ int hv_ringbuffer_read(struct vmbus_channel *channel,
 		return 0;
 	}

-	init_cached_read_index(inring_info);
-
-	next_read_location = hv_get_next_read_location(inring_info);
-	next_read_location = hv_copyfrom_ringbuffer(inring_info, &desc,
-						    sizeof(desc),
-						    next_read_location);
-
-	offset = raw ? 0 : (desc.offset8 << 3);
-	packetlen = (desc.len8 << 3) - offset;
+	offset = raw ? 0 : (desc->offset8 << 3);
+	packetlen = (desc->len8 << 3) - offset;
 	*buffer_actual_len = packetlen;
-	*requestid = desc.trans_id;
+	*requestid = desc->trans_id;

-	if (bytes_avail_toread < packetlen + offset)
-		return -EAGAIN;
-
-	if (packetlen > buflen)
+	if (unlikely(packetlen > buflen))
 		return -ENOBUFS;

-	next_read_location =
-		hv_get_next_readlocation_withoffset(inring_info, offset);
+	/* since ring is double mapped, only one copy is necessary */
+	memcpy(buffer, (const char *)desc + offset, packetlen);

-	next_read_location = hv_copyfrom_ringbuffer(inring_info,
-						buffer,
-						packetlen,
-						next_read_location);
+	/* Advance ring index to next packet descriptor */
+	__hv_pkt_iter_next(channel, desc);

-	next_read_location = hv_copyfrom_ringbuffer(inring_info,
-						&prev_indices,
-						sizeof(u64),
-						next_read_location);
-
-	/*
-	 * Make sure all reads are done before we update the read index since
-	 * the writer may start writing to the read area once the read index
-	 * is updated.
-	 */
-	virt_mb();
-
-	/* Update the read index */
-	hv_set_next_read_location(inring_info, next_read_location);
-
-	hv_signal_on_read(channel);
+	/* Notify host of update */
+	hv_pkt_iter_close(channel);

 	return 0;
 }
@ -440,14 +357,16 @@ static u32 hv_pkt_iter_avail(const struct hv_ring_buffer_info *rbi)
 struct vmpacket_descriptor *hv_pkt_iter_first(struct vmbus_channel *channel)
 {
 	struct hv_ring_buffer_info *rbi = &channel->inbound;
-
-	/* set state for later hv_signal_on_read() */
-	init_cached_read_index(rbi);
+	struct vmpacket_descriptor *desc;

 	if (hv_pkt_iter_avail(rbi) < sizeof(struct vmpacket_descriptor))
 		return NULL;

-	return hv_get_ring_buffer(rbi) + rbi->priv_read_index;
+	desc = hv_get_ring_buffer(rbi) + rbi->priv_read_index;
+	if (desc)
+		prefetch((char *)desc + (desc->len8 << 3));
+
+	return desc;
 }
 EXPORT_SYMBOL_GPL(hv_pkt_iter_first);

@ -471,10 +390,7 @@ __hv_pkt_iter_next(struct vmbus_channel *channel,
 		rbi->priv_read_index -= dsize;

 	/* more data? */
-	if (hv_pkt_iter_avail(rbi) < sizeof(struct vmpacket_descriptor))
-		return NULL;
-	else
-		return hv_get_ring_buffer(rbi) + rbi->priv_read_index;
+	return hv_pkt_iter_first(channel);
 }
 EXPORT_SYMBOL_GPL(__hv_pkt_iter_next);

@ -484,6 +400,7 @@ EXPORT_SYMBOL_GPL(__hv_pkt_iter_next);
 void hv_pkt_iter_close(struct vmbus_channel *channel)
 {
 	struct hv_ring_buffer_info *rbi = &channel->inbound;
+	u32 orig_write_sz = hv_get_bytes_to_write(rbi);

 	/*
 	 * Make sure all reads are done before we update the read index since
@ -493,6 +410,40 @@ void hv_pkt_iter_close(struct vmbus_channel *channel)
 	virt_rmb();
 	rbi->ring_buffer->read_index = rbi->priv_read_index;

-	hv_signal_on_read(channel);
+	/*
+	 * Issue a full memory barrier before making the signaling decision.
+	 * Here is the reason for having this barrier:
+	 * If the reading of the pend_sz (in this function)
+	 * were to be reordered and read before we commit the new read
+	 * index (in the calling function)  we could
+	 * have a problem. If the host were to set the pending_sz after we
+	 * have sampled pending_sz and go to sleep before we commit the
+	 * read index, we could miss sending the interrupt. Issue a full
+	 * memory barrier to address this.
+	 */
+	virt_mb();
+
+	/* If host has disabled notifications then skip */
+	if (rbi->ring_buffer->interrupt_mask)
+		return;
+
+	if (rbi->ring_buffer->feature_bits.feat_pending_send_sz) {
+		u32 pending_sz = READ_ONCE(rbi->ring_buffer->pending_send_sz);
+
+		/*
+		 * If there was space before we began iteration,
+		 * then host was not blocked. Also handles case where
+		 * pending_sz is zero then host has nothing pending
+		 * and does not need to be signaled.
+		 */
+		if (orig_write_sz > pending_sz)
+			return;
+
+		/* If pending write will not fit, don't give false hope. */
+		if (hv_get_bytes_to_write(rbi) < pending_sz)
+			return;
+	}
+
+	vmbus_setevent(channel);
 }
 EXPORT_SYMBOL_GPL(hv_pkt_iter_close);
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@ -940,6 +940,9 @@ static void vmbus_chan_sched(struct hv_per_cpu_context *hv_cpu)
 			if (channel->offermsg.child_relid != relid)
 				continue;

+			if (channel->rescind)
+				continue;
+
 			switch (channel->callback_mode) {
 			case HV_CALL_ISR:
 				vmbus_channel_isr(channel);
--- a/drivers/hwtracing/coresight/Kconfig
+++ b/drivers/hwtracing/coresight/Kconfig
@ -70,13 +70,13 @@ config CORESIGHT_SOURCE_ETM4X
 	  for instruction level tracing. Depending on the implemented version
 	  data tracing may also be available.

-config CORESIGHT_QCOM_REPLICATOR
-	bool "Qualcomm CoreSight Replicator driver"
+config CORESIGHT_DYNAMIC_REPLICATOR
+	bool "CoreSight Programmable Replicator driver"
 	depends on CORESIGHT_LINKS_AND_SINKS
 	help
-	  This enables support for Qualcomm CoreSight link driver. The
-	  programmable ATB replicator sends the ATB trace stream from the
-	  ETB/ETF to the TPIUi and ETR.
+	  This enables support for dynamic CoreSight replicator link driver.
+	  The programmable ATB replicator allows independent filtering of the
+	  trace data based on the traceid.

 config CORESIGHT_STM
 	bool "CoreSight System Trace Macrocell driver"
--- a/drivers/hwtracing/coresight/Makefile
+++ b/drivers/hwtracing/coresight/Makefile
@ -14,6 +14,6 @@ obj-$(CONFIG_CORESIGHT_SOURCE_ETM3X) += coresight-etm3x.o coresight-etm-cp14.o \
 					coresight-etm3x-sysfs.o
 obj-$(CONFIG_CORESIGHT_SOURCE_ETM4X) += coresight-etm4x.o \
 					coresight-etm4x-sysfs.o
-obj-$(CONFIG_CORESIGHT_QCOM_REPLICATOR) += coresight-replicator-qcom.o
+obj-$(CONFIG_CORESIGHT_DYNAMIC_REPLICATOR) += coresight-dynamic-replicator.o
 obj-$(CONFIG_CORESIGHT_STM) += coresight-stm.o
 obj-$(CONFIG_CORESIGHT_CPU_DEBUG) += coresight-cpu-debug.o
--- a/drivers/hwtracing/coresight/coresight-cpu-debug.c
+++ b/drivers/hwtracing/coresight/coresight-cpu-debug.c
@ -667,7 +667,7 @@ static int debug_remove(struct amba_device *adev)
 	return 0;
 }

-static struct amba_id debug_ids[] = {
+static const struct amba_id debug_ids[] = {
 	{       /* Debug for Cortex-A53 */
 		.id	= 0x000bbd03,
 		.mask	= 0x000fffff,
--- a/drivers/hwtracing/coresight/coresight-dynamic-replicator.c
+++ b/drivers/hwtracing/coresight/coresight-dynamic-replicator.c
@ -95,6 +95,28 @@ static const struct coresight_ops replicator_cs_ops = {
 	.link_ops	= &replicator_link_ops,
 };

+#define coresight_replicator_reg(name, offset) \
+	coresight_simple_reg32(struct replicator_state, name, offset)
+
+coresight_replicator_reg(idfilter0, REPLICATOR_IDFILTER0);
+coresight_replicator_reg(idfilter1, REPLICATOR_IDFILTER1);
+
+static struct attribute *replicator_mgmt_attrs[] = {
+	&dev_attr_idfilter0.attr,
+	&dev_attr_idfilter1.attr,
+	NULL,
+};
+
+static const struct attribute_group replicator_mgmt_group = {
+	.attrs = replicator_mgmt_attrs,
+	.name = "mgmt",
+};
+
+static const struct attribute_group *replicator_groups[] = {
+	&replicator_mgmt_group,
+	NULL,
+};
+
 static int replicator_probe(struct amba_device *adev, const struct amba_id *id)
 {
 	int ret;
@ -139,11 +161,11 @@ static int replicator_probe(struct amba_device *adev, const struct amba_id *id)
 	desc.ops = &replicator_cs_ops;
 	desc.pdata = adev->dev.platform_data;
 	desc.dev = &adev->dev;
+	desc.groups = replicator_groups;
 	drvdata->csdev = coresight_register(&desc);
 	if (IS_ERR(drvdata->csdev))
 		return PTR_ERR(drvdata->csdev);

-	dev_info(dev, "%s initialized\n", (char *)id->data);
 	return 0;
 }

@ -175,18 +197,22 @@ static const struct dev_pm_ops replicator_dev_pm_ops = {
 			   NULL)
 };

-static struct amba_id replicator_ids[] = {
+static const struct amba_id replicator_ids[] = {
 	{
 		.id     = 0x0003b909,
 		.mask   = 0x0003ffff,
-		.data	= "REPLICATOR 1.0",
+	},
+	{
+		/* Coresight SoC-600 */
+		.id     = 0x000bb9ec,
+		.mask   = 0x000fffff,
 	},
 	{ 0, 0 },
 };

 static struct amba_driver replicator_driver = {
 	.drv = {
-		.name	= "coresight-replicator-qcom",
+		.name	= "coresight-dynamic-replicator",
 		.pm	= &replicator_dev_pm_ops,
 		.suppress_bind_attrs = true,
 	},
--- a/drivers/hwtracing/coresight/coresight-etb10.c
+++ b/drivers/hwtracing/coresight/coresight-etb10.c
@ -200,8 +200,10 @@ static void etb_disable_hw(struct etb_drvdata *drvdata)

 static void etb_dump_hw(struct etb_drvdata *drvdata)
 {
+	bool lost = false;
 	int i;
 	u8 *buf_ptr;
+	const u32 *barrier;
 	u32 read_data, depth;
 	u32 read_ptr, write_ptr;
 	u32 frame_off, frame_endoff;
@ -223,20 +225,26 @@ static void etb_dump_hw(struct etb_drvdata *drvdata)
 	}

 	if ((readl_relaxed(drvdata->base + ETB_STATUS_REG)
-		      & ETB_STATUS_RAM_FULL) == 0)
+		      & ETB_STATUS_RAM_FULL) == 0) {
 		writel_relaxed(0x0, drvdata->base + ETB_RAM_READ_POINTER);
-	else
+	} else {
 		writel_relaxed(write_ptr, drvdata->base + ETB_RAM_READ_POINTER);
+		lost = true;
+	}

 	depth = drvdata->buffer_depth;
 	buf_ptr = drvdata->buf;
+	barrier = barrier_pkt;
 	for (i = 0; i < depth; i++) {
 		read_data = readl_relaxed(drvdata->base +
 					  ETB_RAM_READ_DATA_REG);
-		*buf_ptr++ = read_data >> 0;
-		*buf_ptr++ = read_data >> 8;
-		*buf_ptr++ = read_data >> 16;
-		*buf_ptr++ = read_data >> 24;
+		if (lost && *barrier) {
+			read_data = *barrier;
+			barrier++;
+		}
+
+		*(u32 *)buf_ptr = read_data;
+		buf_ptr += 4;
 	}

 	if (frame_off) {
@ -353,8 +361,10 @@ static void etb_update_buffer(struct coresight_device *csdev,
 			      struct perf_output_handle *handle,
 			      void *sink_config)
 {
+	bool lost = false;
 	int i, cur;
 	u8 *buf_ptr;
+	const u32 *barrier;
 	u32 read_ptr, write_ptr, capacity;
 	u32 status, read_data, to_read;
 	unsigned long offset;
@ -366,8 +376,8 @@ static void etb_update_buffer(struct coresight_device *csdev,

 	capacity = drvdata->buffer_depth * ETB_FRAME_SIZE_WORDS;

-	CS_UNLOCK(drvdata->base);
 	etb_disable_hw(drvdata);
+	CS_UNLOCK(drvdata->base);

 	/* unit is in words, not bytes */
 	read_ptr = readl_relaxed(drvdata->base + ETB_RAM_READ_POINTER);
@ -384,7 +394,7 @@ static void etb_update_buffer(struct coresight_device *csdev,
 			(unsigned long)write_ptr);

 		write_ptr &= ~(ETB_FRAME_SIZE_WORDS - 1);
-		perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
+		lost = true;
 	}

 	/*
@ -395,7 +405,7 @@ static void etb_update_buffer(struct coresight_device *csdev,
 	 */
 	status = readl_relaxed(drvdata->base + ETB_STATUS_REG);
 	if (status & ETB_STATUS_RAM_FULL) {
-		perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
+		lost = true;
 		to_read = capacity;
 		read_ptr = write_ptr;
 	} else {
@ -428,22 +438,30 @@ static void etb_update_buffer(struct coresight_device *csdev,
 		if (read_ptr > (drvdata->buffer_depth - 1))
 			read_ptr -= drvdata->buffer_depth;
 		/* let the decoder know we've skipped ahead */
-		perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
+		lost = true;
 	}

+	if (lost)
+		perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
+
 	/* finally tell HW where we want to start reading from */
 	writel_relaxed(read_ptr, drvdata->base + ETB_RAM_READ_POINTER);

 	cur = buf->cur;
 	offset = buf->offset;
+	barrier = barrier_pkt;
+
 	for (i = 0; i < to_read; i += 4) {
 		buf_ptr = buf->data_pages[cur] + offset;
 		read_data = readl_relaxed(drvdata->base +
 					  ETB_RAM_READ_DATA_REG);
-		*buf_ptr++ = read_data >> 0;
-		*buf_ptr++ = read_data >> 8;
-		*buf_ptr++ = read_data >> 16;
-		*buf_ptr++ = read_data >> 24;
+		if (lost && *barrier) {
+			read_data = *barrier;
+			barrier++;
+		}
+
+		*(u32 *)buf_ptr = read_data;
+		buf_ptr += 4;

 		offset += 4;
 		if (offset >= PAGE_SIZE) {
@ -557,17 +575,17 @@ static const struct file_operations etb_fops = {
 	.llseek		= no_llseek,
 };

-#define coresight_etb10_simple_func(name, offset)                       \
-	coresight_simple_func(struct etb_drvdata, NULL, name, offset)
+#define coresight_etb10_reg(name, offset)		\
+	coresight_simple_reg32(struct etb_drvdata, name, offset)

-coresight_etb10_simple_func(rdp, ETB_RAM_DEPTH_REG);
-coresight_etb10_simple_func(sts, ETB_STATUS_REG);
-coresight_etb10_simple_func(rrp, ETB_RAM_READ_POINTER);
-coresight_etb10_simple_func(rwp, ETB_RAM_WRITE_POINTER);
-coresight_etb10_simple_func(trg, ETB_TRG);
-coresight_etb10_simple_func(ctl, ETB_CTL_REG);
-coresight_etb10_simple_func(ffsr, ETB_FFSR);
-coresight_etb10_simple_func(ffcr, ETB_FFCR);
+coresight_etb10_reg(rdp, ETB_RAM_DEPTH_REG);
+coresight_etb10_reg(sts, ETB_STATUS_REG);
+coresight_etb10_reg(rrp, ETB_RAM_READ_POINTER);
+coresight_etb10_reg(rwp, ETB_RAM_WRITE_POINTER);
+coresight_etb10_reg(trg, ETB_TRG);
+coresight_etb10_reg(ctl, ETB_CTL_REG);
+coresight_etb10_reg(ffsr, ETB_FFSR);
+coresight_etb10_reg(ffcr, ETB_FFCR);

 static struct attribute *coresight_etb_mgmt_attrs[] = {
 	&dev_attr_rdp.attr,
@ -728,7 +746,7 @@ static const struct dev_pm_ops etb_dev_pm_ops = {
 	SET_RUNTIME_PM_OPS(etb_runtime_suspend, etb_runtime_resume, NULL)
 };

-static struct amba_id etb_ids[] = {
+static const struct amba_id etb_ids[] = {
 	{
 		.id	= 0x0003b907,
 		.mask	= 0x0003ffff,
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@ -53,14 +53,16 @@ static DEFINE_PER_CPU(struct coresight_device *, csdev_src);
 /* ETMv3.5/PTM's ETMCR is 'config' */
 PMU_FORMAT_ATTR(cycacc,		"config:" __stringify(ETM_OPT_CYCACC));
 PMU_FORMAT_ATTR(timestamp,	"config:" __stringify(ETM_OPT_TS));
+PMU_FORMAT_ATTR(retstack,	"config:" __stringify(ETM_OPT_RETSTK));

 static struct attribute *etm_config_formats_attr[] = {
 	&format_attr_cycacc.attr,
 	&format_attr_timestamp.attr,
+	&format_attr_retstack.attr,
 	NULL,
 };

-static struct attribute_group etm_pmu_format_group = {
+static const struct attribute_group etm_pmu_format_group = {
 	.name   = "format",
 	.attrs  = etm_config_formats_attr,
 };
--- a/drivers/hwtracing/coresight/coresight-etm.h
+++ b/drivers/hwtracing/coresight/coresight-etm.h
@ -106,6 +106,7 @@
 #define ETMTECR1_START_STOP	BIT(25)
 /* ETMCCER - 0x1E8 */
 #define ETMCCER_TIMESTAMP	BIT(22)
+#define ETMCCER_RETSTACK	BIT(23)

 #define ETM_MODE_EXCLUDE	BIT(0)
 #define ETM_MODE_CYCACC		BIT(1)
--- a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c
@ -1232,19 +1232,19 @@ static struct attribute *coresight_etm_attrs[] = {
 	NULL,
 };

-#define coresight_etm3x_simple_func(name, offset)			\
-	coresight_simple_func(struct etm_drvdata, NULL, name, offset)
+#define coresight_etm3x_reg(name, offset)			\
+	coresight_simple_reg32(struct etm_drvdata, name, offset)

-coresight_etm3x_simple_func(etmccr, ETMCCR);
-coresight_etm3x_simple_func(etmccer, ETMCCER);
-coresight_etm3x_simple_func(etmscr, ETMSCR);
-coresight_etm3x_simple_func(etmidr, ETMIDR);
-coresight_etm3x_simple_func(etmcr, ETMCR);
-coresight_etm3x_simple_func(etmtraceidr, ETMTRACEIDR);
-coresight_etm3x_simple_func(etmteevr, ETMTEEVR);
-coresight_etm3x_simple_func(etmtssvr, ETMTSSCR);
-coresight_etm3x_simple_func(etmtecr1, ETMTECR1);
-coresight_etm3x_simple_func(etmtecr2, ETMTECR2);
+coresight_etm3x_reg(etmccr, ETMCCR);
+coresight_etm3x_reg(etmccer, ETMCCER);
+coresight_etm3x_reg(etmscr, ETMSCR);
+coresight_etm3x_reg(etmidr, ETMIDR);
+coresight_etm3x_reg(etmcr, ETMCR);
+coresight_etm3x_reg(etmtraceidr, ETMTRACEIDR);
+coresight_etm3x_reg(etmteevr, ETMTEEVR);
+coresight_etm3x_reg(etmtssvr, ETMTSSCR);
+coresight_etm3x_reg(etmtecr1, ETMTECR1);
+coresight_etm3x_reg(etmtecr2, ETMTECR2);

 static struct attribute *coresight_etm_mgmt_attrs[] = {
 	&dev_attr_etmccr.attr,
--- a/drivers/hwtracing/coresight/coresight-etm3x.c
+++ b/drivers/hwtracing/coresight/coresight-etm3x.c
@ -243,6 +243,8 @@ void etm_set_default(struct etm_config *config)
 	}

 	config->ctxid_mask = 0x0;
+	/* Setting default to 1024 as per TRM recommendation */
+	config->sync_freq = 0x400;
 }

 void etm_config_trace_mode(struct etm_config *config)
@ -308,7 +310,9 @@ void etm_config_trace_mode(struct etm_config *config)
 	config->addr_type[1] = ETM_ADDR_TYPE_RANGE;
 }

-#define ETM3X_SUPPORTED_OPTIONS (ETMCR_CYC_ACC | ETMCR_TIMESTAMP_EN)
+#define ETM3X_SUPPORTED_OPTIONS (ETMCR_CYC_ACC | \
+				 ETMCR_TIMESTAMP_EN | \
+				 ETMCR_RETURN_STACK)

 static int etm_parse_event_config(struct etm_drvdata *drvdata,
 				  struct perf_event *event)
@ -339,14 +343,24 @@ static int etm_parse_event_config(struct etm_drvdata *drvdata,
 		etm_config_trace_mode(config);

 	/*
-	 * At this time only cycle accurate and timestamp options are
-	 * available.
+	 * At this time only cycle accurate, return stack  and timestamp
+	 * options are available.
 	 */
 	if (attr->config & ~ETM3X_SUPPORTED_OPTIONS)
 		return -EINVAL;

 	config->ctrl = attr->config;

+	/*
+	 * Possible to have cores with PTM (supports ret stack) and ETM
+	 * (never has ret stack) on the same SoC. So if we have a request
+	 * for return stack that can't be honoured on this core then
+	 * clear the bit - trace will still continue normally
+	 */
+	if ((config->ctrl & ETMCR_RETURN_STACK) &&
+	    !(drvdata->etmccer & ETMCCER_RETSTACK))
+		config->ctrl &= ~ETMCR_RETURN_STACK;
+
 	return 0;
 }

@ -885,7 +899,7 @@ static const struct dev_pm_ops etm_dev_pm_ops = {
 	SET_RUNTIME_PM_OPS(etm_runtime_suspend, etm_runtime_resume, NULL)
 };

-static struct amba_id etm_ids[] = {
+static const struct amba_id etm_ids[] = {
 	{	/* ETM 3.3 */
 		.id	= 0x0003b921,
 		.mask	= 0x0003ffff,
--- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
@ -2066,23 +2066,23 @@ static u32 etmv4_cross_read(const struct device *dev, u32 offset)
 	return reg.data;
 }

-#define coresight_etm4x_simple_func(name, offset)			\
-	coresight_simple_func(struct etmv4_drvdata, NULL, name, offset)
+#define coresight_etm4x_reg(name, offset)			\
+	coresight_simple_reg32(struct etmv4_drvdata, name, offset)

 #define coresight_etm4x_cross_read(name, offset)			\
 	coresight_simple_func(struct etmv4_drvdata, etmv4_cross_read,	\
 			      name, offset)

-coresight_etm4x_simple_func(trcpdcr, TRCPDCR);
-coresight_etm4x_simple_func(trcpdsr, TRCPDSR);
-coresight_etm4x_simple_func(trclsr, TRCLSR);
-coresight_etm4x_simple_func(trcauthstatus, TRCAUTHSTATUS);
-coresight_etm4x_simple_func(trcdevid, TRCDEVID);
-coresight_etm4x_simple_func(trcdevtype, TRCDEVTYPE);
-coresight_etm4x_simple_func(trcpidr0, TRCPIDR0);
-coresight_etm4x_simple_func(trcpidr1, TRCPIDR1);
-coresight_etm4x_simple_func(trcpidr2, TRCPIDR2);
-coresight_etm4x_simple_func(trcpidr3, TRCPIDR3);
+coresight_etm4x_reg(trcpdcr, TRCPDCR);
+coresight_etm4x_reg(trcpdsr, TRCPDSR);
+coresight_etm4x_reg(trclsr, TRCLSR);
+coresight_etm4x_reg(trcauthstatus, TRCAUTHSTATUS);
+coresight_etm4x_reg(trcdevid, TRCDEVID);
+coresight_etm4x_reg(trcdevtype, TRCDEVTYPE);
+coresight_etm4x_reg(trcpidr0, TRCPIDR0);
+coresight_etm4x_reg(trcpidr1, TRCPIDR1);
+coresight_etm4x_reg(trcpidr2, TRCPIDR2);
+coresight_etm4x_reg(trcpidr3, TRCPIDR3);
 coresight_etm4x_cross_read(trcoslsr, TRCOSLSR);
 coresight_etm4x_cross_read(trcconfig, TRCCONFIGR);
 coresight_etm4x_cross_read(trctraceid, TRCTRACEIDR);
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@ -224,6 +224,10 @@ static int etm4_parse_event_config(struct etmv4_drvdata *drvdata,
 	if (attr->config & BIT(ETM_OPT_TS))
 		/* bit[11], Global timestamp tracing bit */
 		config->cfg |= BIT(11);
+	/* return stack - enable if selected and supported */
+	if ((attr->config & BIT(ETM_OPT_RETSTK)) && drvdata->retstack)
+		/* bit[12], Return stack enable bit */
+		config->cfg |= BIT(12);

 out:
 	return ret;
@ -1048,7 +1052,7 @@ static int etm4_probe(struct amba_device *adev, const struct amba_id *id)
 	return ret;
 }

-static struct amba_id etm4_ids[] = {
+static const struct amba_id etm4_ids[] = {
 	{       /* ETM 4.0 - Cortex-A53  */
 		.id	= 0x000bb95d,
 		.mask	= 0x000fffff,
--- a/drivers/hwtracing/coresight/coresight-funnel.c
+++ b/drivers/hwtracing/coresight/coresight-funnel.c
@ -246,11 +246,16 @@ static const struct dev_pm_ops funnel_dev_pm_ops = {
 	SET_RUNTIME_PM_OPS(funnel_runtime_suspend, funnel_runtime_resume, NULL)
 };

-static struct amba_id funnel_ids[] = {
+static const struct amba_id funnel_ids[] = {
 	{
 		.id     = 0x0003b908,
 		.mask   = 0x0003ffff,
 	},
+	{
+		/* Coresight SoC-600 */
+		.id     = 0x000bb9eb,
+		.mask   = 0x000fffff,
+	},
 	{ 0, 0},
 };

--- a/drivers/hwtracing/coresight/coresight-priv.h
+++ b/drivers/hwtracing/coresight/coresight-priv.h
@ -39,23 +39,33 @@
 #define ETM_MODE_EXCL_USER	BIT(31)

 typedef u32 (*coresight_read_fn)(const struct device *, u32 offset);
-#define coresight_simple_func(type, func, name, offset)			\
+#define __coresight_simple_func(type, func, name, lo_off, hi_off)	\
 static ssize_t name##_show(struct device *_dev,				\
 			   struct device_attribute *attr, char *buf)	\
 {									\
 	type *drvdata = dev_get_drvdata(_dev->parent);			\
 	coresight_read_fn fn = func;					\
-	u32 val;							\
+	u64 val;							\
 	pm_runtime_get_sync(_dev->parent);				\
 	if (fn)								\
-		val = fn(_dev->parent, offset);				\
+		val = (u64)fn(_dev->parent, lo_off);			\
 	else								\
-		val = readl_relaxed(drvdata->base + offset);		\
+		val = coresight_read_reg_pair(drvdata->base,		\
+						 lo_off, hi_off);	\
 	pm_runtime_put_sync(_dev->parent);				\
-	return scnprintf(buf, PAGE_SIZE, "0x%x\n", val);		\
+	return scnprintf(buf, PAGE_SIZE, "0x%llx\n", val);		\
 }									\
 static DEVICE_ATTR_RO(name)

+#define coresight_simple_func(type, func, name, offset)			\
+	__coresight_simple_func(type, func, name, offset, -1)
+#define coresight_simple_reg32(type, name, offset)			\
+	__coresight_simple_func(type, NULL, name, offset, -1)
+#define coresight_simple_reg64(type, name, lo_off, hi_off)		\
+	__coresight_simple_func(type, NULL, name, lo_off, hi_off)
+
+extern const u32 barrier_pkt[5];
+
 enum etm_addr_type {
 	ETM_ADDR_TYPE_NONE,
 	ETM_ADDR_TYPE_SINGLE,
@ -106,6 +116,25 @@ static inline void CS_UNLOCK(void __iomem *addr)
 	} while (0);
 }

+static inline u64
+coresight_read_reg_pair(void __iomem *addr, s32 lo_offset, s32 hi_offset)
+{
+	u64 val;
+
+	val = readl_relaxed(addr + lo_offset);
+	val |= (hi_offset < 0) ? 0 :
+	       (u64)readl_relaxed(addr + hi_offset) << 32;
+	return val;
+}
+
+static inline void coresight_write_reg_pair(void __iomem *addr, u64 val,
+						 s32 lo_offset, s32 hi_offset)
+{
+	writel_relaxed((u32)val, addr + lo_offset);
+	if (hi_offset >= 0)
+		writel_relaxed((u32)(val >> 32), addr + hi_offset);
+}
+
 void coresight_disable_path(struct list_head *path);
 int coresight_enable_path(struct list_head *path, u32 mode);
 struct coresight_device *coresight_get_sink(struct list_head *path);
--- a/drivers/hwtracing/coresight/coresight-stm.c
+++ b/drivers/hwtracing/coresight/coresight-stm.c
@ -276,7 +276,7 @@ static void stm_disable(struct coresight_device *csdev,
 		spin_unlock(&drvdata->spinlock);

 		/* Wait until the engine has completely stopped */
-		coresight_timeout(drvdata, STMTCSR, STMTCSR_BUSY_BIT, 0);
+		coresight_timeout(drvdata->base, STMTCSR, STMTCSR_BUSY_BIT, 0);

 		pm_runtime_put(drvdata->dev);

@ -307,7 +307,8 @@ static inline bool stm_addr_unaligned(const void *addr, u8 write_bytes)
 	return ((unsigned long)addr & (write_bytes - 1));
 }

-static void stm_send(void *addr, const void *data, u32 size, u8 write_bytes)
+static void stm_send(void __iomem *addr, const void *data,
+		     u32 size, u8 write_bytes)
 {
 	u8 paload[8];

@ -414,7 +415,7 @@ static ssize_t notrace stm_generic_packet(struct stm_data *stm_data,
 				  unsigned int size,
 				  const unsigned char *payload)
 {
-	unsigned long ch_addr;
+	void __iomem *ch_addr;
 	struct stm_drvdata *drvdata = container_of(stm_data,
 						   struct stm_drvdata, stm);

@ -424,7 +425,7 @@ static ssize_t notrace stm_generic_packet(struct stm_data *stm_data,
 	if (channel >= drvdata->numsp)
 		return -EINVAL;

-	ch_addr = (unsigned long)stm_channel_addr(drvdata, channel);
+	ch_addr = stm_channel_addr(drvdata, channel);

 	flags = (flags == STP_PACKET_TIMESTAMPED) ? STM_FLAG_TIMESTAMPED : 0;
 	flags |= test_bit(channel, drvdata->chs.guaranteed) ?
@ -437,20 +438,20 @@ static ssize_t notrace stm_generic_packet(struct stm_data *stm_data,

 	switch (packet) {
 	case STP_PACKET_FLAG:
-		ch_addr |= stm_channel_off(STM_PKT_TYPE_FLAG, flags);
+		ch_addr += stm_channel_off(STM_PKT_TYPE_FLAG, flags);

 		/*
 		 * The generic STM core sets a size of '0' on flag packets.
 		 * As such send a flag packet of size '1' and tell the
 		 * core we did so.
 		 */
-		stm_send((void *)ch_addr, payload, 1, drvdata->write_bytes);
+		stm_send(ch_addr, payload, 1, drvdata->write_bytes);
 		size = 1;
 		break;

 	case STP_PACKET_DATA:
-		ch_addr |= stm_channel_off(STM_PKT_TYPE_DATA, flags);
-		stm_send((void *)ch_addr, payload, size,
+		ch_addr += stm_channel_off(STM_PKT_TYPE_DATA, flags);
+		stm_send(ch_addr, payload, size,
 				drvdata->write_bytes);
 		break;

@ -635,21 +636,21 @@ static ssize_t traceid_store(struct device *dev,
 }
 static DEVICE_ATTR_RW(traceid);

-#define coresight_stm_simple_func(name, offset)	\
-	coresight_simple_func(struct stm_drvdata, NULL, name, offset)
+#define coresight_stm_reg(name, offset)	\
+	coresight_simple_reg32(struct stm_drvdata, name, offset)

-coresight_stm_simple_func(tcsr, STMTCSR);
-coresight_stm_simple_func(tsfreqr, STMTSFREQR);
-coresight_stm_simple_func(syncr, STMSYNCR);
-coresight_stm_simple_func(sper, STMSPER);
-coresight_stm_simple_func(spter, STMSPTER);
-coresight_stm_simple_func(privmaskr, STMPRIVMASKR);
-coresight_stm_simple_func(spscr, STMSPSCR);
-coresight_stm_simple_func(spmscr, STMSPMSCR);
-coresight_stm_simple_func(spfeat1r, STMSPFEAT1R);
-coresight_stm_simple_func(spfeat2r, STMSPFEAT2R);
-coresight_stm_simple_func(spfeat3r, STMSPFEAT3R);
-coresight_stm_simple_func(devid, CORESIGHT_DEVID);
+coresight_stm_reg(tcsr, STMTCSR);
+coresight_stm_reg(tsfreqr, STMTSFREQR);
+coresight_stm_reg(syncr, STMSYNCR);
+coresight_stm_reg(sper, STMSPER);
+coresight_stm_reg(spter, STMSPTER);
+coresight_stm_reg(privmaskr, STMPRIVMASKR);
+coresight_stm_reg(spscr, STMSPSCR);
+coresight_stm_reg(spmscr, STMSPMSCR);
+coresight_stm_reg(spfeat1r, STMSPFEAT1R);
+coresight_stm_reg(spfeat2r, STMSPFEAT2R);
+coresight_stm_reg(spfeat3r, STMSPFEAT3R);
+coresight_stm_reg(devid, CORESIGHT_DEVID);

 static struct attribute *coresight_stm_attrs[] = {
 	&dev_attr_hwevent_enable.attr,
@ -914,7 +915,7 @@ static const struct dev_pm_ops stm_dev_pm_ops = {
 	SET_RUNTIME_PM_OPS(stm_runtime_suspend, stm_runtime_resume, NULL)
 };

-static struct amba_id stm_ids[] = {
+static const struct amba_id stm_ids[] = {
 	{
 		.id     = 0x0003b962,
 		.mask   = 0x0003ffff,
--- a/drivers/hwtracing/coresight/coresight-tmc-etf.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c
@ -43,17 +43,34 @@ static void tmc_etb_enable_hw(struct tmc_drvdata *drvdata)

 static void tmc_etb_dump_hw(struct tmc_drvdata *drvdata)
 {
+	bool lost = false;
 	char *bufp;
-	u32 read_data;
+	const u32 *barrier;
+	u32 read_data, status;
 	int i;

+	/*
+	 * Get a hold of the status register and see if a wrap around
+	 * has occurred.
+	 */
+	status = readl_relaxed(drvdata->base + TMC_STS);
+	if (status & TMC_STS_FULL)
+		lost = true;
+
 	bufp = drvdata->buf;
 	drvdata->len = 0;
+	barrier = barrier_pkt;
 	while (1) {
 		for (i = 0; i < drvdata->memwidth; i++) {
 			read_data = readl_relaxed(drvdata->base + TMC_RRD);
 			if (read_data == 0xFFFFFFFF)
 				return;
+
+			if (lost && *barrier) {
+				read_data = *barrier;
+				barrier++;
+			}
+
 			memcpy(bufp, &read_data, 4);
 			bufp += 4;
 			drvdata->len += 4;
@ -369,9 +386,11 @@ static void tmc_update_etf_buffer(struct coresight_device *csdev,
 				  struct perf_output_handle *handle,
 				  void *sink_config)
 {
+	bool lost = false;
 	int i, cur;
+	const u32 *barrier;
 	u32 *buf_ptr;
-	u32 read_ptr, write_ptr;
+	u64 read_ptr, write_ptr;
 	u32 status, to_read;
 	unsigned long offset;
 	struct cs_buffers *buf = sink_config;
@ -388,8 +407,8 @@ static void tmc_update_etf_buffer(struct coresight_device *csdev,

 	tmc_flush_and_stop(drvdata);

-	read_ptr = readl_relaxed(drvdata->base + TMC_RRP);
-	write_ptr = readl_relaxed(drvdata->base + TMC_RWP);
+	read_ptr = tmc_read_rrp(drvdata);
+	write_ptr = tmc_read_rwp(drvdata);

 	/*
 	 * Get a hold of the status register and see if a wrap around
@ -397,7 +416,7 @@ static void tmc_update_etf_buffer(struct coresight_device *csdev,
 	 */
 	status = readl_relaxed(drvdata->base + TMC_STS);
 	if (status & TMC_STS_FULL) {
-		perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
+		lost = true;
 		to_read = drvdata->size;
 	} else {
 		to_read = CIRC_CNT(write_ptr, read_ptr, drvdata->size);
@ -441,18 +460,27 @@ static void tmc_update_etf_buffer(struct coresight_device *csdev,
 		if (read_ptr > (drvdata->size - 1))
 			read_ptr -= drvdata->size;
 		/* Tell the HW */
-		writel_relaxed(read_ptr, drvdata->base + TMC_RRP);
-		perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
+		tmc_write_rrp(drvdata, read_ptr);
+		lost = true;
 	}

+	if (lost)
+		perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
+
 	cur = buf->cur;
 	offset = buf->offset;
+	barrier = barrier_pkt;

 	/* for every byte to read */
 	for (i = 0; i < to_read; i += 4) {
 		buf_ptr = buf->data_pages[cur] + offset;
 		*buf_ptr = readl_relaxed(drvdata->base + TMC_RRD);

+		if (lost && *barrier) {
+			*buf_ptr = *barrier;
+			barrier++;
+		}
+
 		offset += 4;
 		if (offset >= PAGE_SIZE) {
 			offset = 0;
--- a/drivers/hwtracing/coresight/coresight-tmc-etr.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c
@ -22,7 +22,7 @@

 static void tmc_etr_enable_hw(struct tmc_drvdata *drvdata)
 {
-	u32 axictl;
+	u32 axictl, sts;

 	/* Zero out the memory to help with debug */
 	memset(drvdata->vaddr, 0, drvdata->size);
@ -36,17 +36,29 @@ static void tmc_etr_enable_hw(struct tmc_drvdata *drvdata)
 	writel_relaxed(TMC_MODE_CIRCULAR_BUFFER, drvdata->base + TMC_MODE);

 	axictl = readl_relaxed(drvdata->base + TMC_AXICTL);
-	axictl |= TMC_AXICTL_WR_BURST_16;
-	writel_relaxed(axictl, drvdata->base + TMC_AXICTL);
-	axictl &= ~TMC_AXICTL_SCT_GAT_MODE;
-	writel_relaxed(axictl, drvdata->base + TMC_AXICTL);
-	axictl = (axictl &
-		  ~(TMC_AXICTL_PROT_CTL_B0 | TMC_AXICTL_PROT_CTL_B1)) |
-		  TMC_AXICTL_PROT_CTL_B1;
-	writel_relaxed(axictl, drvdata->base + TMC_AXICTL);
+	axictl &= ~TMC_AXICTL_CLEAR_MASK;
+	axictl |= (TMC_AXICTL_PROT_CTL_B1 | TMC_AXICTL_WR_BURST_16);
+	axictl |= TMC_AXICTL_AXCACHE_OS;
+
+	if (tmc_etr_has_cap(drvdata, TMC_ETR_AXI_ARCACHE)) {
+		axictl &= ~TMC_AXICTL_ARCACHE_MASK;
+		axictl |= TMC_AXICTL_ARCACHE_OS;
+	}
+
+	writel_relaxed(axictl, drvdata->base + TMC_AXICTL);
+	tmc_write_dba(drvdata, drvdata->paddr);
+	/*
+	 * If the TMC pointers must be programmed before the session,
+	 * we have to set it properly (i.e, RRP/RWP to base address and
+	 * STS to "not full").
+	 */
+	if (tmc_etr_has_cap(drvdata, TMC_ETR_SAVE_RESTORE)) {
+		tmc_write_rrp(drvdata, drvdata->paddr);
+		tmc_write_rwp(drvdata, drvdata->paddr);
+		sts = readl_relaxed(drvdata->base + TMC_STS) & ~TMC_STS_FULL;
+		writel_relaxed(sts, drvdata->base + TMC_STS);
+	}

-	writel_relaxed(drvdata->paddr, drvdata->base + TMC_DBALO);
-	writel_relaxed(0x0, drvdata->base + TMC_DBAHI);
 	writel_relaxed(TMC_FFCR_EN_FMT | TMC_FFCR_EN_TI |
 		       TMC_FFCR_FON_FLIN | TMC_FFCR_FON_TRIG_EVT |
 		       TMC_FFCR_TRIGON_TRIGIN,
@ -59,9 +71,12 @@ static void tmc_etr_enable_hw(struct tmc_drvdata *drvdata)

 static void tmc_etr_dump_hw(struct tmc_drvdata *drvdata)
 {
-	u32 rwp, val;
+	const u32 *barrier;
+	u32 val;
+	u32 *temp;
+	u64 rwp;

-	rwp = readl_relaxed(drvdata->base + TMC_RWP);
+	rwp = tmc_read_rwp(drvdata);
 	val = readl_relaxed(drvdata->base + TMC_STS);

 	/*
@ -71,6 +86,16 @@ static void tmc_etr_dump_hw(struct tmc_drvdata *drvdata)
 	if (val & TMC_STS_FULL) {
 		drvdata->buf = drvdata->vaddr + rwp - drvdata->paddr;
 		drvdata->len = drvdata->size;
+
+		barrier = barrier_pkt;
+		temp = (u32 *)drvdata->buf;
+
+		while (*barrier) {
+			*temp = *barrier;
+			temp++;
+			barrier++;
+		}
+
 	} else {
 		drvdata->buf = drvdata->vaddr;
 		drvdata->len = rwp - drvdata->paddr;
--- a/drivers/hwtracing/coresight/coresight-tmc.c
+++ b/drivers/hwtracing/coresight/coresight-tmc.c
@ -217,20 +217,24 @@ static enum tmc_mem_intf_width tmc_get_memwidth(u32 devid)
 	return memwidth;
 }

-#define coresight_tmc_simple_func(name, offset)			\
-	coresight_simple_func(struct tmc_drvdata, NULL, name, offset)
+#define coresight_tmc_reg(name, offset)			\
+	coresight_simple_reg32(struct tmc_drvdata, name, offset)
+#define coresight_tmc_reg64(name, lo_off, hi_off)	\
+	coresight_simple_reg64(struct tmc_drvdata, name, lo_off, hi_off)

-coresight_tmc_simple_func(rsz, TMC_RSZ);
-coresight_tmc_simple_func(sts, TMC_STS);
-coresight_tmc_simple_func(rrp, TMC_RRP);
-coresight_tmc_simple_func(rwp, TMC_RWP);
-coresight_tmc_simple_func(trg, TMC_TRG);
-coresight_tmc_simple_func(ctl, TMC_CTL);
-coresight_tmc_simple_func(ffsr, TMC_FFSR);
-coresight_tmc_simple_func(ffcr, TMC_FFCR);
-coresight_tmc_simple_func(mode, TMC_MODE);
-coresight_tmc_simple_func(pscr, TMC_PSCR);
-coresight_tmc_simple_func(devid, CORESIGHT_DEVID);
+coresight_tmc_reg(rsz, TMC_RSZ);
+coresight_tmc_reg(sts, TMC_STS);
+coresight_tmc_reg(trg, TMC_TRG);
+coresight_tmc_reg(ctl, TMC_CTL);
+coresight_tmc_reg(ffsr, TMC_FFSR);
+coresight_tmc_reg(ffcr, TMC_FFCR);
+coresight_tmc_reg(mode, TMC_MODE);
+coresight_tmc_reg(pscr, TMC_PSCR);
+coresight_tmc_reg(axictl, TMC_AXICTL);
+coresight_tmc_reg(devid, CORESIGHT_DEVID);
+coresight_tmc_reg64(rrp, TMC_RRP, TMC_RRPHI);
+coresight_tmc_reg64(rwp, TMC_RWP, TMC_RWPHI);
+coresight_tmc_reg64(dba, TMC_DBALO, TMC_DBAHI);

 static struct attribute *coresight_tmc_mgmt_attrs[] = {
 	&dev_attr_rsz.attr,
@ -244,6 +248,8 @@ static struct attribute *coresight_tmc_mgmt_attrs[] = {
 	&dev_attr_mode.attr,
 	&dev_attr_pscr.attr,
 	&dev_attr_devid.attr,
+	&dev_attr_dba.attr,
+	&dev_attr_axictl.attr,
 	NULL,
 };

@ -293,6 +299,42 @@ const struct attribute_group *coresight_tmc_groups[] = {
 	NULL,
 };

+/* Detect and initialise the capabilities of a TMC ETR */
+static int tmc_etr_setup_caps(struct tmc_drvdata *drvdata,
+			     u32 devid, void *dev_caps)
+{
+	u32 dma_mask = 0;
+
+	/* Set the unadvertised capabilities */
+	tmc_etr_init_caps(drvdata, (u32)(unsigned long)dev_caps);
+
+	if (!(devid & TMC_DEVID_NOSCAT))
+		tmc_etr_set_cap(drvdata, TMC_ETR_SG);
+
+	/* Check if the AXI address width is available */
+	if (devid & TMC_DEVID_AXIAW_VALID)
+		dma_mask = ((devid >> TMC_DEVID_AXIAW_SHIFT) &
+				TMC_DEVID_AXIAW_MASK);
+
+	/*
+	 * Unless specified in the device configuration, ETR uses a 40-bit
+	 * AXI master in place of the embedded SRAM of ETB/ETF.
+	 */
+	switch (dma_mask) {
+	case 32:
+	case 40:
+	case 44:
+	case 48:
+	case 52:
+		dev_info(drvdata->dev, "Detected dma mask %dbits\n", dma_mask);
+		break;
+	default:
+		dma_mask = 40;
+	}
+
+	return dma_set_mask_and_coherent(drvdata->dev, DMA_BIT_MASK(dma_mask));
+}
+
 static int tmc_probe(struct amba_device *adev, const struct amba_id *id)
 {
 	int ret = 0;
@ -354,25 +396,29 @@ static int tmc_probe(struct amba_device *adev, const struct amba_id *id)
 	desc.dev = dev;
 	desc.groups = coresight_tmc_groups;

-	if (drvdata->config_type == TMC_CONFIG_TYPE_ETB) {
+	switch (drvdata->config_type) {
+	case TMC_CONFIG_TYPE_ETB:
 		desc.type = CORESIGHT_DEV_TYPE_SINK;
 		desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_BUFFER;
 		desc.ops = &tmc_etb_cs_ops;
-	} else if (drvdata->config_type == TMC_CONFIG_TYPE_ETR) {
+		break;
+	case TMC_CONFIG_TYPE_ETR:
 		desc.type = CORESIGHT_DEV_TYPE_SINK;
 		desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_BUFFER;
 		desc.ops = &tmc_etr_cs_ops;
-		/*
-		 * ETR configuration uses a 40-bit AXI master in place of
-		 * the embedded SRAM of ETB/ETF.
-		 */
-		ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
+		ret = tmc_etr_setup_caps(drvdata, devid, id->data);
 		if (ret)
 			goto out;
-	} else {
+		break;
+	case TMC_CONFIG_TYPE_ETF:
 		desc.type = CORESIGHT_DEV_TYPE_LINKSINK;
 		desc.subtype.link_subtype = CORESIGHT_DEV_SUBTYPE_LINK_FIFO;
 		desc.ops = &tmc_etf_cs_ops;
+		break;
+	default:
+		pr_err("%s: Unsupported TMC config\n", pdata->name);
+		ret = -EINVAL;
+		goto out;
 	}

 	drvdata->csdev = coresight_register(&desc);
@ -391,11 +437,27 @@ static int tmc_probe(struct amba_device *adev, const struct amba_id *id)
 	return ret;
 }

-static struct amba_id tmc_ids[] = {
+static const struct amba_id tmc_ids[] = {
 	{
 		.id     = 0x0003b961,
 		.mask   = 0x0003ffff,
 	},
+	{
+		/* Coresight SoC 600 TMC-ETR/ETS */
+		.id	= 0x000bb9e8,
+		.mask	= 0x000fffff,
+		.data	= (void *)(unsigned long)CORESIGHT_SOC_600_ETR_CAPS,
+	},
+	{
+		/* Coresight SoC 600 TMC-ETB */
+		.id	= 0x000bb9e9,
+		.mask	= 0x000fffff,
+	},
+	{
+		/* Coresight SoC 600 TMC-ETF */
+		.id	= 0x000bb9ea,
+		.mask	= 0x000fffff,
+	},
 	{ 0, 0},
 };

--- a/drivers/hwtracing/coresight/coresight-tmc.h
+++ b/drivers/hwtracing/coresight/coresight-tmc.h
@ -54,11 +54,32 @@
 #define TMC_STS_TMCREADY_BIT	2
 #define TMC_STS_FULL		BIT(0)
 #define TMC_STS_TRIGGERED	BIT(1)
-/* TMC_AXICTL - 0x110 */
+/*
+ * TMC_AXICTL - 0x110
+ *
+ * TMC AXICTL format for SoC-400
+ *	Bits [0-1]	: ProtCtrlBit0-1
+ *	Bits [2-5]	: CacheCtrlBits 0-3 (AXCACHE)
+ *	Bit  6		: Reserved
+ *	Bit  7		: ScatterGatherMode
+ *	Bits [8-11]	: WrBurstLen
+ *	Bits [12-31]	: Reserved.
+ * TMC AXICTL format for SoC-600, as above except:
+ *	Bits [2-5]	: AXI WCACHE
+ *	Bits [16-19]	: AXI RCACHE
+ *	Bits [20-31]	: Reserved
+ */
+#define TMC_AXICTL_CLEAR_MASK 0xfbf
+#define TMC_AXICTL_ARCACHE_MASK (0xf << 16)
+
 #define TMC_AXICTL_PROT_CTL_B0	BIT(0)
 #define TMC_AXICTL_PROT_CTL_B1	BIT(1)
 #define TMC_AXICTL_SCT_GAT_MODE	BIT(7)
 #define TMC_AXICTL_WR_BURST_16	0xF00
+/* Write-back Read and Write-allocate */
+#define TMC_AXICTL_AXCACHE_OS	(0xf << 2)
+#define TMC_AXICTL_ARCACHE_OS	(0xf << 16)
+
 /* TMC_FFCR - 0x304 */
 #define TMC_FFCR_FLUSHMAN_BIT	6
 #define TMC_FFCR_EN_FMT		BIT(0)
@ -69,6 +90,12 @@
 #define TMC_FFCR_STOP_ON_FLUSH	BIT(12)


+#define TMC_DEVID_NOSCAT	BIT(24)
+
+#define TMC_DEVID_AXIAW_VALID	BIT(16)
+#define TMC_DEVID_AXIAW_SHIFT	17
+#define TMC_DEVID_AXIAW_MASK	0x7f
+
 enum tmc_config_type {
 	TMC_CONFIG_TYPE_ETB,
 	TMC_CONFIG_TYPE_ETR,
@ -88,6 +115,24 @@ enum tmc_mem_intf_width {
 	TMC_MEM_INTF_WIDTH_256BITS	= 8,
 };

+/* TMC ETR Capability bit definitions */
+#define TMC_ETR_SG			(0x1U << 0)
+/* ETR has separate read/write cache encodings */
+#define TMC_ETR_AXI_ARCACHE		(0x1U << 1)
+/*
+ * TMC_ETR_SAVE_RESTORE - Values of RRP/RWP/STS.Full are
+ * retained when TMC leaves Disabled state, allowing us to continue
+ * the tracing from a point where we stopped. This also implies that
+ * the RRP/RWP/STS.Full should always be programmed to the correct
+ * value. Unfortunately this is not advertised by the hardware,
+ * so we have to rely on PID of the IP to detect the functionality.
+ */
+#define TMC_ETR_SAVE_RESTORE		(0x1U << 2)
+
+/* Coresight SoC-600 TMC-ETR unadvertised capabilities */
+#define CORESIGHT_SOC_600_ETR_CAPS	\
+	(TMC_ETR_SAVE_RESTORE | TMC_ETR_AXI_ARCACHE)
+
 /**
 * struct tmc_drvdata - specifics associated to an TMC component
 * @base:	memory mapped base address for this component.
@ -104,6 +149,8 @@ enum tmc_mem_intf_width {
 * @config_type: TMC variant, must be of type @tmc_config_type.
 * @memwidth:	width of the memory interface databus, in bytes.
 * @trigger_cntr: amount of words to store after a trigger.
+ * @etr_caps:	Bitmask of capabilities of the TMC ETR, inferred from the
+ *		device configuration register (DEVID)
 */
 struct tmc_drvdata {
 	void __iomem		*base;
@ -121,6 +168,7 @@ struct tmc_drvdata {
 	enum tmc_config_type	config_type;
 	enum tmc_mem_intf_width	memwidth;
 	u32			trigger_cntr;
+	u32			etr_caps;
 };

 /* Generic functions */
@ -139,4 +187,39 @@ extern const struct coresight_ops tmc_etf_cs_ops;
 int tmc_read_prepare_etr(struct tmc_drvdata *drvdata);
 int tmc_read_unprepare_etr(struct tmc_drvdata *drvdata);
 extern const struct coresight_ops tmc_etr_cs_ops;
+
+
+#define TMC_REG_PAIR(name, lo_off, hi_off)				\
+static inline u64							\
+tmc_read_##name(struct tmc_drvdata *drvdata)				\
+{									\
+	return coresight_read_reg_pair(drvdata->base, lo_off, hi_off);	\
+}									\
+static inline void							\
+tmc_write_##name(struct tmc_drvdata *drvdata, u64 val)			\
+{									\
+	coresight_write_reg_pair(drvdata->base, val, lo_off, hi_off);	\
+}
+
+TMC_REG_PAIR(rrp, TMC_RRP, TMC_RRPHI)
+TMC_REG_PAIR(rwp, TMC_RWP, TMC_RWPHI)
+TMC_REG_PAIR(dba, TMC_DBALO, TMC_DBAHI)
+
+/* Initialise the caps from unadvertised static capabilities of the device */
+static inline void tmc_etr_init_caps(struct tmc_drvdata *drvdata, u32 dev_caps)
+{
+	WARN_ON(drvdata->etr_caps);
+	drvdata->etr_caps = dev_caps;
+}
+
+static inline void tmc_etr_set_cap(struct tmc_drvdata *drvdata, u32 cap)
+{
+	drvdata->etr_caps |= cap;
+}
+
+static inline bool tmc_etr_has_cap(struct tmc_drvdata *drvdata, u32 cap)
+{
+	return !!(drvdata->etr_caps & cap);
+}
+
 #endif
--- a/drivers/hwtracing/coresight/coresight-tpiu.c
+++ b/drivers/hwtracing/coresight/coresight-tpiu.c
@ -192,7 +192,7 @@ static const struct dev_pm_ops tpiu_dev_pm_ops = {
 	SET_RUNTIME_PM_OPS(tpiu_runtime_suspend, tpiu_runtime_resume, NULL)
 };

-static struct amba_id tpiu_ids[] = {
+static const struct amba_id tpiu_ids[] = {
 	{
 		.id	= 0x0003b912,
 		.mask	= 0x0003ffff,
@ -201,6 +201,11 @@ static struct amba_id tpiu_ids[] = {
 		.id	= 0x0004b912,
 		.mask	= 0x0007ffff,
 	},
+	{
+		/* Coresight SoC-600 */
+		.id	= 0x000bb9e7,
+		.mask	= 0x000fffff,
+	},
 	{ 0, 0},
 };

--- a/drivers/hwtracing/coresight/coresight.c
+++ b/drivers/hwtracing/coresight/coresight.c
@ -53,6 +53,14 @@ static DEFINE_PER_CPU(struct list_head *, tracer_path);
 */
 static struct list_head *stm_path;

+/*
+ * When losing synchronisation a new barrier packet needs to be inserted at the
+ * beginning of the data collected in a buffer.  That way the decoder knows that
+ * it needs to look for another sync sequence.
+ */
+const u32 barrier_pkt[5] = {0x7fffffff, 0x7fffffff,
+			    0x7fffffff, 0x7fffffff, 0x0};
+
 static int coresight_id_match(struct device *dev, void *data)
 {
 	int trace_id, i_trace_id;
--- a/drivers/hwtracing/intel_th/core.c
+++ b/drivers/hwtracing/intel_th/core.c
@ -101,17 +101,53 @@ static int intel_th_probe(struct device *dev)
 	return ret;
 }

+static void intel_th_device_remove(struct intel_th_device *thdev);
+
 static int intel_th_remove(struct device *dev)
 {
 	struct intel_th_driver *thdrv = to_intel_th_driver(dev->driver);
 	struct intel_th_device *thdev = to_intel_th_device(dev);
-	struct intel_th_device *hub = to_intel_th_device(dev->parent);
+	struct intel_th_device *hub = to_intel_th_hub(thdev);
 	int err;

 	if (thdev->type == INTEL_TH_SWITCH) {
+		struct intel_th *th = to_intel_th(hub);
+		int i, lowest;
+
+		/* disconnect outputs */
 		err = device_for_each_child(dev, thdev, intel_th_child_remove);
 		if (err)
 			return err;
+
+		/*
+		 * Remove outputs, that is, hub's children: they are created
+		 * at hub's probe time by having the hub call
+		 * intel_th_output_enable() for each of them.
+		 */
+		for (i = 0, lowest = -1; i < th->num_thdevs; i++) {
+			/*
+			 * Move the non-output devices from higher up the
+			 * th->thdev[] array to lower positions to maintain
+			 * a contiguous array.
+			 */
+			if (th->thdev[i]->type != INTEL_TH_OUTPUT) {
+				if (lowest >= 0) {
+					th->thdev[lowest] = th->thdev[i];
+					th->thdev[i] = NULL;
+					++lowest;
+				}
+
+				continue;
+			}
+
+			if (lowest == -1)
+				lowest = i;
+
+			intel_th_device_remove(th->thdev[i]);
+			th->thdev[i] = NULL;
+		}
+
+		th->num_thdevs = lowest;
 	}

 	if (thdrv->attr_group)
@ -156,21 +192,6 @@ static struct device_type intel_th_source_device_type = {
 	.release	= intel_th_device_release,
 };

-static struct intel_th *to_intel_th(struct intel_th_device *thdev)
-{
-	/*
-	 * subdevice tree is flat: if this one is not a switch, its
-	 * parent must be
-	 */
-	if (thdev->type != INTEL_TH_SWITCH)
-		thdev = to_intel_th_hub(thdev);
-
-	if (WARN_ON_ONCE(!thdev || thdev->type != INTEL_TH_SWITCH))
-		return NULL;
-
-	return dev_get_drvdata(thdev->dev.parent);
-}
-
 static char *intel_th_output_devnode(struct device *dev, umode_t *mode,
 				     kuid_t *uid, kgid_t *gid)
 {
@ -205,6 +226,7 @@ static int intel_th_output_activate(struct intel_th_device *thdev)
 {
 	struct intel_th_driver *thdrv =
 		to_intel_th_driver_or_null(thdev->dev.driver);
+	struct intel_th *th = to_intel_th(thdev);
 	int ret = 0;

 	if (!thdrv)
@ -215,15 +237,28 @@ static int intel_th_output_activate(struct intel_th_device *thdev)

 	pm_runtime_get_sync(&thdev->dev);

+	if (th->activate)
+		ret = th->activate(th);
+	if (ret)
+		goto fail_put;
+
 	if (thdrv->activate)
 		ret = thdrv->activate(thdev);
 	else
 		intel_th_trace_enable(thdev);

-	if (ret) {
-		pm_runtime_put(&thdev->dev);
-		module_put(thdrv->driver.owner);
-	}
+	if (ret)
+		goto fail_deactivate;
+
+	return 0;
+
+fail_deactivate:
+	if (th->deactivate)
+		th->deactivate(th);
+
+fail_put:
+	pm_runtime_put(&thdev->dev);
+	module_put(thdrv->driver.owner);

 	return ret;
 }
@ -232,6 +267,7 @@ static void intel_th_output_deactivate(struct intel_th_device *thdev)
 {
 	struct intel_th_driver *thdrv =
 		to_intel_th_driver_or_null(thdev->dev.driver);
+	struct intel_th *th = to_intel_th(thdev);

 	if (!thdrv)
 		return;
@ -241,6 +277,9 @@ static void intel_th_output_deactivate(struct intel_th_device *thdev)
 	else
 		intel_th_trace_disable(thdev);

+	if (th->deactivate)
+		th->deactivate(th);
+
 	pm_runtime_put(&thdev->dev);
 	module_put(thdrv->driver.owner);
 }
@ -326,10 +365,10 @@ intel_th_device_alloc(struct intel_th *th, unsigned int type, const char *name,
 	struct device *parent;
 	struct intel_th_device *thdev;

-	if (type == INTEL_TH_SWITCH)
-		parent = th->dev;
-	else
+	if (type == INTEL_TH_OUTPUT)
 		parent = &th->hub->dev;
+	else
+		parent = th->dev;

 	thdev = kzalloc(sizeof(*thdev) + strlen(name) + 1, GFP_KERNEL);
 	if (!thdev)
@ -392,13 +431,14 @@ static const struct intel_th_subdevice {
 	unsigned		otype;
 	unsigned		scrpd;
 	int			id;
-} intel_th_subdevices[TH_SUBDEVICE_MAX] = {
+} intel_th_subdevices[] = {
 	{
 		.nres	= 1,
 		.res	= {
 			{
+				/* Handle TSCU from GTH driver */
 				.start	= REG_GTH_OFFSET,
-				.end	= REG_GTH_OFFSET + REG_GTH_LENGTH - 1,
+				.end	= REG_TSCU_OFFSET + REG_TSCU_LENGTH - 1,
 				.flags	= IORESOURCE_MEM,
 			},
 		},
@ -479,6 +519,21 @@ static const struct intel_th_subdevice {
 		.otype	= GTH_PTI,
 		.scrpd	= SCRPD_PTI_IS_PRIM_DEST,
 	},
+	{
+		.nres	= 1,
+		.res	= {
+			{
+				.start	= REG_PTI_OFFSET,
+				.end	= REG_PTI_OFFSET + REG_PTI_LENGTH - 1,
+				.flags	= IORESOURCE_MEM,
+			},
+		},
+		.id	= -1,
+		.name	= "lpp",
+		.type	= INTEL_TH_OUTPUT,
+		.otype	= GTH_LPP,
+		.scrpd	= SCRPD_PTI_IS_PRIM_DEST,
+	},
 	{
 		.nres	= 1,
 		.res	= {
@ -526,98 +581,182 @@ static inline void intel_th_request_hub_module_flush(struct intel_th *th)
 }
 #endif /* CONFIG_MODULES */

-static int intel_th_populate(struct intel_th *th, struct resource *devres,
-			     unsigned int ndevres, int irq)
+static struct intel_th_device *
+intel_th_subdevice_alloc(struct intel_th *th,
+			 const struct intel_th_subdevice *subdev)
 {
+	struct intel_th_device *thdev;
 	struct resource res[3];
 	unsigned int req = 0;
-	int src, dst, err;
+	int r, err;
+
+	thdev = intel_th_device_alloc(th, subdev->type, subdev->name,
+				      subdev->id);
+	if (!thdev)
+		return ERR_PTR(-ENOMEM);
+
+	thdev->drvdata = th->drvdata;
+
+	memcpy(res, subdev->res,
+	       sizeof(struct resource) * subdev->nres);
+
+	for (r = 0; r < subdev->nres; r++) {
+		struct resource *devres = th->resource;
+		int bar = TH_MMIO_CONFIG;
+
+		/*
+		 * Take .end == 0 to mean 'take the whole bar',
+		 * .start then tells us which bar it is. Default to
+		 * TH_MMIO_CONFIG.
+		 */
+		if (!res[r].end && res[r].flags == IORESOURCE_MEM) {
+			bar = res[r].start;
+			res[r].start = 0;
+			res[r].end = resource_size(&devres[bar]) - 1;
+		}
+
+		if (res[r].flags & IORESOURCE_MEM) {
+			res[r].start	+= devres[bar].start;
+			res[r].end	+= devres[bar].start;
+
+			dev_dbg(th->dev, "%s:%d @ %pR\n",
+				subdev->name, r, &res[r]);
+		} else if (res[r].flags & IORESOURCE_IRQ) {
+			res[r].start	= th->irq;
+		}
+	}
+
+	err = intel_th_device_add_resources(thdev, res, subdev->nres);
+	if (err) {
+		put_device(&thdev->dev);
+		goto fail_put_device;
+	}
+
+	if (subdev->type == INTEL_TH_OUTPUT) {
+		thdev->dev.devt = MKDEV(th->major, th->num_thdevs);
+		thdev->output.type = subdev->otype;
+		thdev->output.port = -1;
+		thdev->output.scratchpad = subdev->scrpd;
+	} else if (subdev->type == INTEL_TH_SWITCH) {
+		thdev->host_mode = host_mode;
+		th->hub = thdev;
+	}
+
+	err = device_add(&thdev->dev);
+	if (err) {
+		put_device(&thdev->dev);
+		goto fail_free_res;
+	}
+
+	/* need switch driver to be loaded to enumerate the rest */
+	if (subdev->type == INTEL_TH_SWITCH && !req) {
+		err = intel_th_request_hub_module(th);
+		if (!err)
+			req++;
+	}
+
+	return thdev;
+
+fail_free_res:
+	kfree(thdev->resource);
+
+fail_put_device:
+	put_device(&thdev->dev);
+
+	return ERR_PTR(err);
+}
+
+/**
+ * intel_th_output_enable() - find and enable a device for a given output type
+ * @th:		Intel TH instance
+ * @otype:	output type
+ *
+ * Go through the unallocated output devices, find the first one whos type
+ * matches @otype and instantiate it. These devices are removed when the hub
+ * device is removed, see intel_th_remove().
+ */
+int intel_th_output_enable(struct intel_th *th, unsigned int otype)
+{
+	struct intel_th_device *thdev;
+	int src = 0, dst = 0;
+
+	for (src = 0, dst = 0; dst <= th->num_thdevs; src++, dst++) {
+		for (; src < ARRAY_SIZE(intel_th_subdevices); src++) {
+			if (intel_th_subdevices[src].type != INTEL_TH_OUTPUT)
+				continue;
+
+			if (intel_th_subdevices[src].otype != otype)
+				continue;
+
+			break;
+		}
+
+		/* no unallocated matching subdevices */
+		if (src == ARRAY_SIZE(intel_th_subdevices))
+			return -ENODEV;
+
+		for (; dst < th->num_thdevs; dst++) {
+			if (th->thdev[dst]->type != INTEL_TH_OUTPUT)
+				continue;
+
+			if (th->thdev[dst]->output.type != otype)
+				continue;
+
+			break;
+		}
+
+		/*
+		 * intel_th_subdevices[src] matches our requirements and is
+		 * not matched in th::thdev[]
+		 */
+		if (dst == th->num_thdevs)
+			goto found;
+	}
+
+	return -ENODEV;
+
+found:
+	thdev = intel_th_subdevice_alloc(th, &intel_th_subdevices[src]);
+	if (IS_ERR(thdev))
+		return PTR_ERR(thdev);
+
+	th->thdev[th->num_thdevs++] = thdev;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(intel_th_output_enable);
+
+static int intel_th_populate(struct intel_th *th)
+{
+	int src;

 	/* create devices for each intel_th_subdevice */
-	for (src = 0, dst = 0; src < ARRAY_SIZE(intel_th_subdevices); src++) {
+	for (src = 0; src < ARRAY_SIZE(intel_th_subdevices); src++) {
 		const struct intel_th_subdevice *subdev =
 			&intel_th_subdevices[src];
 		struct intel_th_device *thdev;
-		int r;

 		/* only allow SOURCE and SWITCH devices in host mode */
 		if (host_mode && subdev->type == INTEL_TH_OUTPUT)
 			continue;

-		thdev = intel_th_device_alloc(th, subdev->type, subdev->name,
-					      subdev->id);
-		if (!thdev) {
-			err = -ENOMEM;
-			goto kill_subdevs;
-		}
+		/*
+		 * don't enable port OUTPUTs in this path; SWITCH enables them
+		 * via intel_th_output_enable()
+		 */
+		if (subdev->type == INTEL_TH_OUTPUT &&
+		    subdev->otype != GTH_NONE)
+			continue;

-		memcpy(res, subdev->res,
-		       sizeof(struct resource) * subdev->nres);
+		thdev = intel_th_subdevice_alloc(th, subdev);
+		/* note: caller should free subdevices from th::thdev[] */
+		if (IS_ERR(thdev))
+			return PTR_ERR(thdev);

-		for (r = 0; r < subdev->nres; r++) {
-			int bar = TH_MMIO_CONFIG;
-
-			/*
-			 * Take .end == 0 to mean 'take the whole bar',
-			 * .start then tells us which bar it is. Default to
-			 * TH_MMIO_CONFIG.
-			 */
-			if (!res[r].end && res[r].flags == IORESOURCE_MEM) {
-				bar = res[r].start;
-				res[r].start = 0;
-				res[r].end = resource_size(&devres[bar]) - 1;
-			}
-
-			if (res[r].flags & IORESOURCE_MEM) {
-				res[r].start	+= devres[bar].start;
-				res[r].end	+= devres[bar].start;
-
-				dev_dbg(th->dev, "%s:%d @ %pR\n",
-					subdev->name, r, &res[r]);
-			} else if (res[r].flags & IORESOURCE_IRQ) {
-				res[r].start	= irq;
-			}
-		}
-
-		err = intel_th_device_add_resources(thdev, res, subdev->nres);
-		if (err) {
-			put_device(&thdev->dev);
-			goto kill_subdevs;
-		}
-
-		if (subdev->type == INTEL_TH_OUTPUT) {
-			thdev->dev.devt = MKDEV(th->major, dst);
-			thdev->output.type = subdev->otype;
-			thdev->output.port = -1;
-			thdev->output.scratchpad = subdev->scrpd;
-		} else if (subdev->type == INTEL_TH_SWITCH) {
-			thdev->host_mode = host_mode;
-		}
-
-		err = device_add(&thdev->dev);
-		if (err) {
-			put_device(&thdev->dev);
-			goto kill_subdevs;
-		}
-
-		/* need switch driver to be loaded to enumerate the rest */
-		if (subdev->type == INTEL_TH_SWITCH && !req) {
-			th->hub = thdev;
-			err = intel_th_request_hub_module(th);
-			if (!err)
-				req++;
-		}
-
-		th->thdev[dst++] = thdev;
+		th->thdev[th->num_thdevs++] = thdev;
 	}

 	return 0;
-
-kill_subdevs:
-	for (; dst >= 0; dst--)
-		intel_th_device_remove(th->thdev[dst]);
-
-	return err;
 }

 static int match_devt(struct device *dev, void *data)
@ -670,8 +809,8 @@ static const struct file_operations intel_th_output_fops = {
 * @irq:	irq number
 */
 struct intel_th *
-intel_th_alloc(struct device *dev, struct resource *devres,
-	       unsigned int ndevres, int irq)
+intel_th_alloc(struct device *dev, struct intel_th_drvdata *drvdata,
+	       struct resource *devres, unsigned int ndevres, int irq)
 {
 	struct intel_th *th;
 	int err;
@ -693,6 +832,11 @@ intel_th_alloc(struct device *dev, struct resource *devres,
 		goto err_ida;
 	}
 	th->dev = dev;
+	th->drvdata = drvdata;
+
+	th->resource = devres;
+	th->num_resources = ndevres;
+	th->irq = irq;

 	dev_set_drvdata(dev, th);

@ -700,18 +844,15 @@ intel_th_alloc(struct device *dev, struct resource *devres,
 	pm_runtime_put(dev);
 	pm_runtime_allow(dev);

-	err = intel_th_populate(th, devres, ndevres, irq);
-	if (err)
-		goto err_chrdev;
+	err = intel_th_populate(th);
+	if (err) {
+		/* free the subdevices and undo everything */
+		intel_th_free(th);
+		return ERR_PTR(err);
+	}

 	return th;

-err_chrdev:
-	pm_runtime_forbid(dev);
-
-	__unregister_chrdev(th->major, 0, TH_POSSIBLE_OUTPUTS,
-			    "intel_th/output");
-
 err_ida:
 	ida_simple_remove(&intel_th_ida, th->id);

@ -727,11 +868,15 @@ void intel_th_free(struct intel_th *th)
 	int i;

 	intel_th_request_hub_module_flush(th);
-	for (i = 0; i < TH_SUBDEVICE_MAX; i++)
-		if (th->thdev[i] && th->thdev[i] != th->hub)
-			intel_th_device_remove(th->thdev[i]);

 	intel_th_device_remove(th->hub);
+	for (i = 0; i < th->num_thdevs; i++) {
+		if (th->thdev[i] != th->hub)
+			intel_th_device_remove(th->thdev[i]);
+		th->thdev[i] = NULL;
+	}
+
+	th->num_thdevs = 0;

 	pm_runtime_get_sync(th->dev);
 	pm_runtime_forbid(th->dev);
--- a/drivers/hwtracing/intel_th/gth.c
+++ b/drivers/hwtracing/intel_th/gth.c
@ -285,16 +285,16 @@ gth_output_parm_get(struct gth_device *gth, int port, unsigned int parm)
 */
 static int intel_th_gth_reset(struct gth_device *gth)
 {
-	u32 scratchpad;
+	u32 reg;
 	int port, i;

-	scratchpad = ioread32(gth->base + REG_GTH_SCRPD0);
-	if (scratchpad & SCRPD_DEBUGGER_IN_USE)
+	reg = ioread32(gth->base + REG_GTH_SCRPD0);
+	if (reg & SCRPD_DEBUGGER_IN_USE)
 		return -EBUSY;

 	/* Always save/restore STH and TU registers in S0ix entry/exit */
-	scratchpad |= SCRPD_STH_IS_ENABLED | SCRPD_TRIGGER_IS_ENABLED;
-	iowrite32(scratchpad, gth->base + REG_GTH_SCRPD0);
+	reg |= SCRPD_STH_IS_ENABLED | SCRPD_TRIGGER_IS_ENABLED;
+	iowrite32(reg, gth->base + REG_GTH_SCRPD0);

 	/* output ports */
 	for (port = 0; port < 8; port++) {
@ -512,6 +512,15 @@ static void intel_th_gth_disable(struct intel_th_device *thdev,
 	iowrite32(reg, gth->base + REG_GTH_SCRPD0);
 }

+static void gth_tscu_resync(struct gth_device *gth)
+{
+	u32 reg;
+
+	reg = ioread32(gth->base + REG_TSCU_TSUCTRL);
+	reg &= ~TSUCTRL_CTCRESYNC;
+	iowrite32(reg, gth->base + REG_TSCU_TSUCTRL);
+}
+
 /**
 * intel_th_gth_enable() - enable tracing to an output device
 * @thdev:	GTH device
@ -524,6 +533,7 @@ static void intel_th_gth_enable(struct intel_th_device *thdev,
 				struct intel_th_output *output)
 {
 	struct gth_device *gth = dev_get_drvdata(&thdev->dev);
+	struct intel_th *th = to_intel_th(thdev);
 	u32 scr = 0xfc0000, scrpd;
 	int master;

@ -539,6 +549,9 @@ static void intel_th_gth_enable(struct intel_th_device *thdev,
 	output->active = true;
 	spin_unlock(&gth->gth_lock);

+	if (INTEL_TH_CAP(th, tscu_enable))
+		gth_tscu_resync(gth);
+
 	scrpd = ioread32(gth->base + REG_GTH_SCRPD0);
 	scrpd |= output->scratchpad;
 	iowrite32(scrpd, gth->base + REG_GTH_SCRPD0);
@ -639,6 +652,7 @@ intel_th_gth_set_output(struct intel_th_device *thdev, unsigned int master)
 static int intel_th_gth_probe(struct intel_th_device *thdev)
 {
 	struct device *dev = &thdev->dev;
+	struct intel_th *th = dev_get_drvdata(dev->parent);
 	struct gth_device *gth;
 	struct resource *res;
 	void __iomem *base;
@ -660,6 +674,8 @@ static int intel_th_gth_probe(struct intel_th_device *thdev)
 	gth->base = base;
 	spin_lock_init(&gth->gth_lock);

+	dev_set_drvdata(dev, gth);
+
 	/*
 	 * Host mode can be signalled via SW means or via SCRPD_DEBUGGER_IN_USE
 	 * bit. Either way, don't reset HW in this case, and don't export any
@ -667,7 +683,7 @@ static int intel_th_gth_probe(struct intel_th_device *thdev)
 	 * drivers to ports, see intel_th_gth_assign().
 	 */
 	if (thdev->host_mode)
-		goto done;
+		return 0;

 	ret = intel_th_gth_reset(gth);
 	if (ret) {
@ -676,7 +692,7 @@ static int intel_th_gth_probe(struct intel_th_device *thdev)

 		thdev->host_mode = true;

-		goto done;
+		return 0;
 	}

 	for (i = 0; i < TH_CONFIGURABLE_MASTERS + 1; i++)
@ -687,6 +703,13 @@ static int intel_th_gth_probe(struct intel_th_device *thdev)
 		gth->output[i].index = i;
 		gth->output[i].port_type =
 			gth_output_parm_get(gth, i, TH_OUTPUT_PARM(port));
+		if (gth->output[i].port_type == GTH_NONE)
+			continue;
+
+		ret = intel_th_output_enable(th, gth->output[i].port_type);
+		/* -ENODEV is ok, we just won't have that device enumerated */
+		if (ret && ret != -ENODEV)
+			return ret;
 	}

 	if (intel_th_output_attributes(gth) ||
@ -698,9 +721,6 @@ static int intel_th_gth_probe(struct intel_th_device *thdev)
 		return -ENOMEM;
 	}

-done:
-	dev_set_drvdata(dev, gth);
-
 	return 0;
 }

--- a/drivers/hwtracing/intel_th/gth.h
+++ b/drivers/hwtracing/intel_th/gth.h
@ -55,9 +55,14 @@ enum {
 	REG_GTH_SCRPD1		= 0xe4, /* ScratchPad[1] */
 	REG_GTH_SCRPD2		= 0xe8, /* ScratchPad[2] */
 	REG_GTH_SCRPD3		= 0xec, /* ScratchPad[3] */
+	REG_TSCU_TSUCTRL	= 0x2000, /* TSCU control register */
+	REG_TSCU_TSCUSTAT	= 0x2004, /* TSCU status register */
 };

 /* waiting for Pipeline Empty bit(s) to assert for GTH */
 #define GTH_PLE_WAITLOOP_DEPTH	10000

+#define TSUCTRL_CTCRESYNC	BIT(0)
+#define TSCUSTAT_CTCSYNCING	BIT(1)
+
 #endif /* __INTEL_TH_GTH_H__ */
--- a/drivers/hwtracing/intel_th/intel_th.h
+++ b/drivers/hwtracing/intel_th/intel_th.h
@ -47,9 +47,20 @@ struct intel_th_output {
 	bool		active;
 };

+/**
+ * struct intel_th_drvdata - describes hardware capabilities and quirks
+ * @tscu_enable:	device needs SW to enable time stamping unit
+ */
+struct intel_th_drvdata {
+	unsigned int	tscu_enable        : 1;
+};
+
+#define INTEL_TH_CAP(_th, _cap) ((_th)->drvdata ? (_th)->drvdata->_cap : 0)
+
 /**
 * struct intel_th_device - device on the intel_th bus
 * @dev:		device
+ * @drvdata:		hardware capabilities/quirks
 * @resource:		array of resources available to this device
 * @num_resources:	number of resources in @resource array
 * @type:		INTEL_TH_{SOURCE,OUTPUT,SWITCH}
@ -59,11 +70,12 @@ struct intel_th_output {
 * @name:		device name to match the driver
 */
 struct intel_th_device {
-	struct device	dev;
-	struct resource	*resource;
-	unsigned int	num_resources;
-	unsigned int	type;
-	int		id;
+	struct device		dev;
+	struct intel_th_drvdata *drvdata;
+	struct resource		*resource;
+	unsigned int		num_resources;
+	unsigned int		type;
+	int			id;

 	/* INTEL_TH_SWITCH specific */
 	bool			host_mode;
@ -96,6 +108,17 @@ intel_th_device_get_resource(struct intel_th_device *thdev, unsigned int type,
 	return NULL;
 }

+/*
+ * GTH, output ports configuration
+ */
+enum {
+	GTH_NONE = 0,
+	GTH_MSU,	/* memory/usb */
+	GTH_CTP,	/* Common Trace Port */
+	GTH_LPP,	/* Low Power Path */
+	GTH_PTI,	/* MIPI-PTI */
+};
+
 /**
 * intel_th_output_assigned() - if an output device is assigned to a switch port
 * @thdev:	the output device
@ -106,7 +129,8 @@ static inline bool
 intel_th_output_assigned(struct intel_th_device *thdev)
 {
 	return thdev->type == INTEL_TH_OUTPUT &&
-		thdev->output.port >= 0;
+		(thdev->output.port >= 0 ||
+		 thdev->output.type == GTH_NONE);
 }

 /**
@ -161,8 +185,18 @@ struct intel_th_driver {
 #define to_intel_th_driver_or_null(_d)		\
 	((_d) ? to_intel_th_driver(_d) : NULL)

+/*
+ * Subdevice tree structure is as follows:
+ * + struct intel_th device (pci; dev_{get,set}_drvdata()
+ *   + struct intel_th_device INTEL_TH_SWITCH (GTH)
+ *     + struct intel_th_device INTEL_TH_OUTPUT (MSU, PTI)
+ *   + struct intel_th_device INTEL_TH_SOURCE (STH)
+ *
+ * In other words, INTEL_TH_OUTPUT devices are children of INTEL_TH_SWITCH;
+ * INTEL_TH_SWITCH and INTEL_TH_SOURCE are children of the intel_th device.
+ */
 static inline struct intel_th_device *
-to_intel_th_hub(struct intel_th_device *thdev)
+to_intel_th_parent(struct intel_th_device *thdev)
 {
 	struct device *parent = thdev->dev.parent;

@ -172,9 +206,20 @@ to_intel_th_hub(struct intel_th_device *thdev)
 	return to_intel_th_device(parent);
 }

+static inline struct intel_th *to_intel_th(struct intel_th_device *thdev)
+{
+	if (thdev->type == INTEL_TH_OUTPUT)
+		thdev = to_intel_th_parent(thdev);
+
+	if (WARN_ON_ONCE(!thdev || thdev->type == INTEL_TH_OUTPUT))
+		return NULL;
+
+	return dev_get_drvdata(thdev->dev.parent);
+}
+
 struct intel_th *
-intel_th_alloc(struct device *dev, struct resource *devres,
-	       unsigned int ndevres, int irq);
+intel_th_alloc(struct device *dev, struct intel_th_drvdata *drvdata,
+	       struct resource *devres, unsigned int ndevres, int irq);
 void intel_th_free(struct intel_th *th);

 int intel_th_driver_register(struct intel_th_driver *thdrv);
@ -184,6 +229,7 @@ int intel_th_trace_enable(struct intel_th_device *thdev);
 int intel_th_trace_disable(struct intel_th_device *thdev);
 int intel_th_set_output(struct intel_th_device *thdev,
 			unsigned int master);
+int intel_th_output_enable(struct intel_th *th, unsigned int otype);

 enum {
 	TH_MMIO_CONFIG = 0,
@ -191,8 +237,9 @@ enum {
 	TH_MMIO_END,
 };

-#define TH_SUBDEVICE_MAX	6
 #define TH_POSSIBLE_OUTPUTS	8
+/* Total number of possible subdevices: outputs + GTH + STH */
+#define TH_SUBDEVICE_MAX	(TH_POSSIBLE_OUTPUTS + 2)
 #define TH_CONFIGURABLE_MASTERS 256
 #define TH_MSC_MAX		2

@ -201,6 +248,10 @@ enum {
 * @dev:	driver core's device
 * @thdev:	subdevices
 * @hub:	"switch" subdevice (GTH)
+ * @resource:	resources of the entire controller
+ * @num_thdevs:	number of devices in the @thdev array
+ * @num_resources:	number or resources in the @resource array
+ * @irq:	irq number
 * @id:		this Intel TH controller's device ID in the system
 * @major:	device node major for output devices
 */
@ -209,6 +260,14 @@ struct intel_th {

 	struct intel_th_device	*thdev[TH_SUBDEVICE_MAX];
 	struct intel_th_device	*hub;
+	struct intel_th_drvdata	*drvdata;
+
+	struct resource		*resource;
+	int			(*activate)(struct intel_th *);
+	void			(*deactivate)(struct intel_th *);
+	unsigned int		num_thdevs;
+	unsigned int		num_resources;
+	int			irq;

 	int			id;
 	int			major;
@ -220,6 +279,17 @@ struct intel_th {
 #endif
 };

+static inline struct intel_th_device *
+to_intel_th_hub(struct intel_th_device *thdev)
+{
+	if (thdev->type == INTEL_TH_SWITCH)
+		return thdev;
+	else if (thdev->type == INTEL_TH_OUTPUT)
+		return to_intel_th_parent(thdev);
+
+	return to_intel_th(thdev)->hub;
+}
+
 /*
 * Register windows
 */
@ -228,6 +298,10 @@ enum {
 	REG_GTH_OFFSET		= 0x0000,
 	REG_GTH_LENGTH		= 0x2000,

+	/* Timestamp counter unit (TSCU) */
+	REG_TSCU_OFFSET		= 0x2000,
+	REG_TSCU_LENGTH		= 0x1000,
+
 	/* Software Trace Hub (STH) [0x4000..0x4fff] */
 	REG_STH_OFFSET		= 0x4000,
 	REG_STH_LENGTH		= 0x2000,
@ -249,16 +323,6 @@ enum {
 	REG_DCIH_LENGTH		= REG_MSU_LENGTH,
 };

-/*
- * GTH, output ports configuration
- */
-enum {
-	GTH_NONE = 0,
-	GTH_MSU,	/* memory/usb */
-	GTH_CTP,	/* Common Trace Port */
-	GTH_PTI = 4,	/* MIPI-PTI */
-};
-
 /*
 * Scratchpad bits: tell firmware and external debuggers
 * what we are up to.
--- a/drivers/hwtracing/intel_th/msu.c
+++ b/drivers/hwtracing/intel_th/msu.c
@ -709,17 +709,17 @@ static int msc_buffer_win_alloc(struct msc *msc, unsigned int nr_blocks)
 	}

 	for (i = 0; i < nr_blocks; i++) {
-		win->block[i].bdesc = dma_alloc_coherent(msc_dev(msc), size,
-							 &win->block[i].addr,
-							 GFP_KERNEL);
+		win->block[i].bdesc =
+			dma_alloc_coherent(msc_dev(msc)->parent->parent, size,
+					   &win->block[i].addr, GFP_KERNEL);
+
+		if (!win->block[i].bdesc)
+			goto err_nomem;

 #ifdef CONFIG_X86
 		/* Set the page as uncached */
 		set_memory_uc((unsigned long)win->block[i].bdesc, 1);
 #endif
-
-		if (!win->block[i].bdesc)
-			goto err_nomem;
 	}

 	win->msc = msc;
--- a/drivers/hwtracing/intel_th/pci.c
+++ b/drivers/hwtracing/intel_th/pci.c
@ -27,9 +27,53 @@

 #define BAR_MASK (BIT(TH_MMIO_CONFIG) | BIT(TH_MMIO_SW))

+#define PCI_REG_NPKDSC	0x80
+#define NPKDSC_TSACT	BIT(5)
+
+static int intel_th_pci_activate(struct intel_th *th)
+{
+	struct pci_dev *pdev = to_pci_dev(th->dev);
+	u32 npkdsc;
+	int err;
+
+	if (!INTEL_TH_CAP(th, tscu_enable))
+		return 0;
+
+	err = pci_read_config_dword(pdev, PCI_REG_NPKDSC, &npkdsc);
+	if (!err) {
+		npkdsc |= NPKDSC_TSACT;
+		err = pci_write_config_dword(pdev, PCI_REG_NPKDSC, npkdsc);
+	}
+
+	if (err)
+		dev_err(&pdev->dev, "failed to read NPKDSC register\n");
+
+	return err;
+}
+
+static void intel_th_pci_deactivate(struct intel_th *th)
+{
+	struct pci_dev *pdev = to_pci_dev(th->dev);
+	u32 npkdsc;
+	int err;
+
+	if (!INTEL_TH_CAP(th, tscu_enable))
+		return;
+
+	err = pci_read_config_dword(pdev, PCI_REG_NPKDSC, &npkdsc);
+	if (!err) {
+		npkdsc |= NPKDSC_TSACT;
+		err = pci_write_config_dword(pdev, PCI_REG_NPKDSC, npkdsc);
+	}
+
+	if (err)
+		dev_err(&pdev->dev, "failed to read NPKDSC register\n");
+}
+
 static int intel_th_pci_probe(struct pci_dev *pdev,
 			      const struct pci_device_id *id)
 {
+	struct intel_th_drvdata *drvdata = (void *)id->driver_data;
 	struct intel_th *th;
 	int err;

@ -41,11 +85,16 @@ static int intel_th_pci_probe(struct pci_dev *pdev,
 	if (err)
 		return err;

-	th = intel_th_alloc(&pdev->dev, pdev->resource,
+	th = intel_th_alloc(&pdev->dev, drvdata, pdev->resource,
 			    DEVICE_COUNT_RESOURCE, pdev->irq);
 	if (IS_ERR(th))
 		return PTR_ERR(th);

+	th->activate   = intel_th_pci_activate;
+	th->deactivate = intel_th_pci_deactivate;
+
+	pci_set_master(pdev);
+
 	return 0;
 }

@ -56,6 +105,10 @@ static void intel_th_pci_remove(struct pci_dev *pdev)
 	intel_th_free(th);
 }

+static const struct intel_th_drvdata intel_th_2x = {
+	.tscu_enable	= 1,
+};
+
 static const struct pci_device_id intel_th_pci_id_table[] = {
 	{
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x9d26),
@ -93,7 +146,17 @@ static const struct pci_device_id intel_th_pci_id_table[] = {
 	{
 		/* Gemini Lake */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x318e),
-		.driver_data = (kernel_ulong_t)0,
+		.driver_data = (kernel_ulong_t)&intel_th_2x,
+	},
+	{
+		/* Cannon Lake H */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xa326),
+		.driver_data = (kernel_ulong_t)&intel_th_2x,
+	},
+	{
+		/* Cannon Lake LP */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x9da6),
+		.driver_data = (kernel_ulong_t)&intel_th_2x,
 	},
 	{ 0 },
 };
--- a/drivers/hwtracing/intel_th/pti.c
+++ b/drivers/hwtracing/intel_th/pti.c
@ -1,7 +1,7 @@
 /*
 * Intel(R) Trace Hub PTI output driver
 *
- * Copyright (C) 2014-2015 Intel Corporation.
+ * Copyright (C) 2014-2016 Intel Corporation.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
@ -34,6 +34,8 @@ struct pti_device {
 	unsigned int		freeclk;
 	unsigned int		clkdiv;
 	unsigned int		patgen;
+	unsigned int		lpp_dest_mask;
+	unsigned int		lpp_dest;
 };

 /* map PTI widths to MODE settings of PTI_CTL register */
@ -163,6 +165,7 @@ static int intel_th_pti_activate(struct intel_th_device *thdev)
 		ctl |= PTI_FCEN;
 	ctl |= pti->mode << __ffs(PTI_MODE);
 	ctl |= pti->clkdiv << __ffs(PTI_CLKDIV);
+	ctl |= pti->lpp_dest << __ffs(LPP_DEST);

 	iowrite32(ctl, pti->base + REG_PTI_CTL);

@ -192,6 +195,15 @@ static void read_hw_config(struct pti_device *pti)
 		pti->mode = pti_width_mode(4);
 	if (!pti->clkdiv)
 		pti->clkdiv = 1;
+
+	if (pti->thdev->output.type == GTH_LPP) {
+		if (ctl & LPP_PTIPRESENT)
+			pti->lpp_dest_mask |= LPP_DEST_PTI;
+		if (ctl & LPP_BSSBPRESENT)
+			pti->lpp_dest_mask |= LPP_DEST_EXI;
+		if (ctl & LPP_DEST)
+			pti->lpp_dest = 1;
+	}
 }

 static int intel_th_pti_probe(struct intel_th_device *thdev)
@ -239,10 +251,103 @@ static struct intel_th_driver intel_th_pti_driver = {
 	},
 };

-module_driver(intel_th_pti_driver,
-	      intel_th_driver_register,
-	      intel_th_driver_unregister);
+static const char * const lpp_dest_str[] = { "pti", "exi" };
+
+static ssize_t lpp_dest_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct pti_device *pti = dev_get_drvdata(dev);
+	ssize_t ret = 0;
+	int i;
+
+	for (i = ARRAY_SIZE(lpp_dest_str) - 1; i >= 0; i--) {
+		const char *fmt = pti->lpp_dest == i ? "[%s] " : "%s ";
+
+		if (!(pti->lpp_dest_mask & BIT(i)))
+			continue;
+
+		ret += scnprintf(buf + ret, PAGE_SIZE - ret,
+				 fmt, lpp_dest_str[i]);
+	}
+
+	if (ret)
+		buf[ret - 1] = '\n';
+
+	return ret;
+}
+
+static ssize_t lpp_dest_store(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t size)
+{
+	struct pti_device *pti = dev_get_drvdata(dev);
+	ssize_t ret = -EINVAL;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lpp_dest_str); i++)
+		if (sysfs_streq(buf, lpp_dest_str[i]))
+			break;
+
+	if (i < ARRAY_SIZE(lpp_dest_str) && pti->lpp_dest_mask & BIT(i)) {
+		pti->lpp_dest = i;
+		ret = size;
+	}
+
+	return ret;
+}
+
+static DEVICE_ATTR_RW(lpp_dest);
+
+static struct attribute *lpp_output_attrs[] = {
+	&dev_attr_mode.attr,
+	&dev_attr_freerunning_clock.attr,
+	&dev_attr_clock_divider.attr,
+	&dev_attr_lpp_dest.attr,
+	NULL,
+};
+
+static struct attribute_group lpp_output_group = {
+	.attrs	= lpp_output_attrs,
+};
+
+static struct intel_th_driver intel_th_lpp_driver = {
+	.probe		= intel_th_pti_probe,
+	.remove		= intel_th_pti_remove,
+	.activate	= intel_th_pti_activate,
+	.deactivate	= intel_th_pti_deactivate,
+	.attr_group	= &lpp_output_group,
+	.driver	= {
+		.name	= "lpp",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init intel_th_pti_lpp_init(void)
+{
+	int err;
+
+	err = intel_th_driver_register(&intel_th_pti_driver);
+	if (err)
+		return err;
+
+	err = intel_th_driver_register(&intel_th_lpp_driver);
+	if (err) {
+		intel_th_driver_unregister(&intel_th_pti_driver);
+		return err;
+	}
+
+	return 0;
+}
+
+module_init(intel_th_pti_lpp_init);
+
+static void __exit intel_th_pti_lpp_exit(void)
+{
+	intel_th_driver_unregister(&intel_th_pti_driver);
+	intel_th_driver_unregister(&intel_th_lpp_driver);
+}
+
+module_exit(intel_th_pti_lpp_exit);

 MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Intel(R) Trace Hub PTI output driver");
+MODULE_DESCRIPTION("Intel(R) Trace Hub PTI/LPP output driver");
 MODULE_AUTHOR("Alexander Shishkin <alexander.shishkin@linux.intel.com>");
--- a/drivers/hwtracing/intel_th/pti.h
+++ b/drivers/hwtracing/intel_th/pti.h
@ -23,7 +23,15 @@ enum {
 #define PTI_EN		BIT(0)
 #define PTI_FCEN	BIT(1)
 #define PTI_MODE	0xf0
+#define LPP_PTIPRESENT	BIT(8)
+#define LPP_BSSBPRESENT	BIT(9)
 #define PTI_CLKDIV	0x000f0000
 #define PTI_PATGENMODE	0x00f00000
+#define LPP_DEST	BIT(25)
+#define LPP_BSSBACT	BIT(30)
+#define LPP_LPPBUSY	BIT(31)
+
+#define LPP_DEST_PTI	BIT(0)
+#define LPP_DEST_EXI	BIT(1)

 #endif /* __INTEL_TH_STH_H__ */
--- a/drivers/hwtracing/stm/core.c
+++ b/drivers/hwtracing/stm/core.c
@ -566,7 +566,7 @@ static int stm_char_policy_set_ioctl(struct stm_file *stmf, void __user *arg)
 	if (copy_from_user(&size, arg, sizeof(size)))
 		return -EFAULT;

-	if (size >= PATH_MAX + sizeof(*id))
+	if (size < sizeof(*id) || size >= PATH_MAX + sizeof(*id))
 		return -EINVAL;

 	/*
--- a/drivers/mcb/mcb-lpc.c
+++ b/drivers/mcb/mcb-lpc.c
@ -114,6 +114,12 @@ static struct resource sc24_fpga_resource = {
 	.flags = IORESOURCE_MEM,
 };

+static struct resource sc31_fpga_resource = {
+	.start = 0xf000e000,
+	.end = 0xf000e000 + CHAM_HEADER_SIZE,
+	.flags = IORESOURCE_MEM,
+};
+
 static struct platform_driver mcb_lpc_driver = {
 	.driver		= {
 		.name = "mcb-lpc",
@ -132,6 +138,15 @@ static const struct dmi_system_id mcb_lpc_dmi_table[] = {
 		.driver_data = (void *)&sc24_fpga_resource,
 		.callback = mcb_lpc_create_platform_device,
 	},
+	{
+		.ident = "SC31",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MEN"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "14SC31"),
+		},
+		.driver_data = (void *)&sc31_fpga_resource,
+		.callback = mcb_lpc_create_platform_device,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(dmi, mcb_lpc_dmi_table);
--- a/drivers/mcb/mcb-parse.c
+++ b/drivers/mcb/mcb-parse.c
@ -182,7 +182,7 @@ int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase,
 	int num_cells = 0;
 	uint32_t dtype;
 	int bar_count;
-	int ret = 0;
+	int ret;
 	u32 hsize;

 	hsize = sizeof(struct chameleon_fpga_header);
@ -210,8 +210,10 @@ int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase,
 		 header->filename);

 	bar_count = chameleon_get_bar(&p, mapbase, &cb);
-	if (bar_count < 0)
+	if (bar_count < 0) {
+		ret = bar_count;
 		goto free_header;
+	}

 	for_each_chameleon_cell(dtype, p) {
 		switch (dtype) {
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@ -60,6 +60,7 @@ lkdtm-$(CONFIG_LKDTM)		+= lkdtm_core.o
 lkdtm-$(CONFIG_LKDTM)		+= lkdtm_bugs.o
 lkdtm-$(CONFIG_LKDTM)		+= lkdtm_heap.o
 lkdtm-$(CONFIG_LKDTM)		+= lkdtm_perms.o
+lkdtm-$(CONFIG_LKDTM)		+= lkdtm_refcount.o
 lkdtm-$(CONFIG_LKDTM)		+= lkdtm_rodata_objcopy.o
 lkdtm-$(CONFIG_LKDTM)		+= lkdtm_usercopy.o

--- a/drivers/misc/apds9802als.c
+++ b/drivers/misc/apds9802als.c
@ -197,7 +197,7 @@ static struct attribute *mid_att_als[] = {
 	NULL
 };

-static struct attribute_group m_als_gr = {
+static const struct attribute_group m_als_gr = {
 	.name = "apds9802als",
 	.attrs = mid_att_als
 };
@ -298,7 +298,7 @@ static UNIVERSAL_DEV_PM_OPS(apds9802als_pm_ops, apds9802als_suspend,
 #define APDS9802ALS_PM_OPS NULL
 #endif	/* CONFIG_PM */

-static struct i2c_device_id apds9802als_id[] = {
+static const struct i2c_device_id apds9802als_id[] = {
 	{ DRIVER_NAME, 0 },
 	{ }
 };
--- a/drivers/misc/apds990x.c
+++ b/drivers/misc/apds990x.c
@ -1051,7 +1051,7 @@ static struct attribute *sysfs_attrs_ctrl[] = {
 	NULL
 };

-static struct attribute_group apds990x_attribute_group[] = {
+static const struct attribute_group apds990x_attribute_group[] = {
 	{.attrs = sysfs_attrs_ctrl },
 };

--- a/drivers/misc/aspeed-lpc-snoop.c
+++ b/drivers/misc/aspeed-lpc-snoop.c
@ -20,6 +20,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>

@ -51,6 +52,13 @@
 #define HICRB_ENSNP0D		BIT(14)
 #define HICRB_ENSNP1D		BIT(15)

+struct aspeed_lpc_snoop_model_data {
+	/* The ast2400 has bits 14 and 15 as reserved, whereas the ast2500
+	 * can use them.
+	 */
+	unsigned int has_hicrb_ensnp;
+};
+
 struct aspeed_lpc_snoop {
 	struct regmap		*regmap;
 	int			irq;
@ -123,10 +131,13 @@ static int aspeed_lpc_snoop_config_irq(struct aspeed_lpc_snoop *lpc_snoop,
 }

 static int aspeed_lpc_enable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
-				  int channel, u16 lpc_port)
+				   struct device *dev,
+				   int channel, u16 lpc_port)
 {
 	int rc = 0;
 	u32 hicr5_en, snpwadr_mask, snpwadr_shift, hicrb_en;
+	const struct aspeed_lpc_snoop_model_data *model_data =
+		of_device_get_match_data(dev);

 	/* Create FIFO datastructure */
 	rc = kfifo_alloc(&lpc_snoop->snoop_fifo[channel],
@ -155,7 +166,9 @@ static int aspeed_lpc_enable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
 	regmap_update_bits(lpc_snoop->regmap, HICR5, hicr5_en, hicr5_en);
 	regmap_update_bits(lpc_snoop->regmap, SNPWADR, snpwadr_mask,
 			   lpc_port << snpwadr_shift);
-	regmap_update_bits(lpc_snoop->regmap, HICRB, hicrb_en, hicrb_en);
+	if (model_data->has_hicrb_ensnp)
+		regmap_update_bits(lpc_snoop->regmap, HICRB,
+				hicrb_en, hicrb_en);

 	return rc;
 }
@ -213,14 +226,14 @@ static int aspeed_lpc_snoop_probe(struct platform_device *pdev)
 	if (rc)
 		return rc;

-	rc = aspeed_lpc_enable_snoop(lpc_snoop, 0, port);
+	rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 0, port);
 	if (rc)
 		return rc;

 	/* Configuration of 2nd snoop channel port is optional */
 	if (of_property_read_u32_index(dev->of_node, "snoop-ports",
 				       1, &port) == 0) {
-		rc = aspeed_lpc_enable_snoop(lpc_snoop, 1, port);
+		rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 1, port);
 		if (rc)
 			aspeed_lpc_disable_snoop(lpc_snoop, 0);
 	}
@ -239,8 +252,19 @@ static int aspeed_lpc_snoop_remove(struct platform_device *pdev)
 	return 0;
 }

+static const struct aspeed_lpc_snoop_model_data ast2400_model_data = {
+	.has_hicrb_ensnp = 0,
+};
+
+static const struct aspeed_lpc_snoop_model_data ast2500_model_data = {
+	.has_hicrb_ensnp = 1,
+};
+
 static const struct of_device_id aspeed_lpc_snoop_match[] = {
-	{ .compatible = "aspeed,ast2500-lpc-snoop" },
+	{ .compatible = "aspeed,ast2400-lpc-snoop",
+	  .data = &ast2400_model_data },
+	{ .compatible = "aspeed,ast2500-lpc-snoop",
+	  .data = &ast2500_model_data },
 	{ },
 };

--- a/drivers/misc/bh1770glc.c
+++ b/drivers/misc/bh1770glc.c
@ -1175,7 +1175,7 @@ static struct attribute *sysfs_attrs[] = {
 	NULL
 };

-static struct attribute_group bh1770_attribute_group = {
+static const struct attribute_group bh1770_attribute_group = {
 	.attrs = sysfs_attrs
 };

--- a/Show More
+++ b/Show More