i.MX clock changes for 5.12:

- Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk
   reparenting.
 - A couple of W=1 build warning fixes from Lee Jones.
 - A series from Liu Ying that adds some SCU clocks support for i.MX8qxp
   DC0/MIPI-LVDS subsystems.
 - A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ,
   and clkout1/2 support for i.MX8MM/MN.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmAY/qoUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM7lXAgAqQ6J/d/bQuurjKSFkg+dRNNWI1uR
 qhSItoY10M0D9mkA+TKhEsdOuyqcipA+DzGSlSKHLEABXPtBpiEQd8aBqzjUXgcl
 hyunxkeswLY1HOX0HT8JeUcUjbcYfqs02+uc9AplHHBAsK6RpljEB8vmPRkiDAKU
 yJAr2+qG5n8wEXmVdcNBBko/WbiG4UlXsnVEnW32afEJGgKfsVi90syQepZlNKMp
 oqYN5atMjjvNT6FJPOOiSp30/scDmAblMhzYlmqCaPjT3byt7Q+/MYLdRFre96YU
 NmV9M0b32VlsdkZA6fsGJLCDaWhsmYC1ZLzbATsMMN+NLAYKivdKC8GnEQ==
 =xer4
 -----END PGP SIGNATURE-----

Merge tag 'clk-imx-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-imx

Pull i.MX clk driver updates from Shawn Guo:

 - Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk
   reparenting
 - A couple of W=1 build warning fixes from Lee Jones
 - A series from Liu Ying that adds some SCU clocks support for i.MX8qxp
   DC0/MIPI-LVDS subsystems
 - A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ,
   and clkout1/2 support for i.MX8MM/MN

* tag 'clk-imx-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  clk: imx: Move 'imx6sl_set_wait_clk()'s prototype out to accessible header
  clk: imx8mn: add clkout1/2 support
  clk: imx8mm: add clkout1/2 support
  clk: imx8mq: add PLL monitor output
  clk: imx: clk-imx31: Remove unused static const table 'uart_clks'
  clk: imx6q: demote warning about pre-boot ldb_di_clk reparenting
  clk: imx: clk-imx8qxp: Add some SCU clocks support for MIPI-LVDS subsystems
  clk: imx: clk-imx8qxp: Register DC0 display clocks with imx_clk_scu2()
  clk: imx: clk-imx8qxp: Add SCU clocks support for DC0 bypass clocks
  clk: imx: clk-imx8qxp: Add SCU clocks support for DC0 PLL clocks

arch/arm/mach-imx/common.h

@@ -85,7 +85,6 @@ void imx_anatop_pre_suspend(void);
 void imx_anatop_post_resume(void);
 int imx6_set_lpm(enum mxc_cpu_pwr_mode mode);
 void imx6_set_int_mem_clk_lpm(bool enable);
-void imx6sl_set_wait_clk(bool enter);
 int imx_mmdc_get_ddr_type(void);
 int imx7ulp_set_lpm(enum ulp_cpu_pwr_mode mode);
 

arch/arm/mach-imx/cpuidle-imx6sl.c

@@ -3,6 +3,7 @@
  * Copyright (C) 2014 Freescale Semiconductor, Inc.
  */
 
+#include <linux/clk/imx.h>
 #include <linux/cpuidle.h>
 #include <linux/module.h>
 #include <asm/cpuidle.h>

arch/arm/mach-imx/pm-imx6.c

@@ -4,6 +4,7 @@
  * Copyright 2011 Linaro Ltd.
  */
 
+#include <linux/clk/imx.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>

drivers/clk/imx/clk-imx31.c

@@ -51,16 +51,6 @@ enum mx31_clks {
 static struct clk *clk[clk_max];
 static struct clk_onecell_data clk_data;
 
-static struct clk ** const uart_clks[] __initconst = {
-	&clk[ipg],
-	&clk[uart1_gate],
-	&clk[uart2_gate],
-	&clk[uart3_gate],
-	&clk[uart4_gate],
-	&clk[uart5_gate],
-	NULL
-};
-
 static void __init _mx31_clocks_init(void __iomem *base, unsigned long fref)
 {
 	clk[dummy] = imx_clk_fixed("dummy", 0);

drivers/clk/imx/clk-imx6q.c

@@ -338,10 +338,10 @@ static void init_ldb_clks(struct device_node *np, void __iomem *ccm_base)
 	of_assigned_ldb_sels(np, &sel[0][3], &sel[1][3]);
 
 	for (i = 0; i < 2; i++) {
-		/* Warn if a glitch might have been introduced already */
+		/* Print a notice if a glitch might have been introduced already */
 		if (sel[i][0] != 3) {
-			pr_warn("ccm: ldb_di%d_sel already changed from reset value: %d\n",
+			pr_notice("ccm: possible glitch: ldb_di%d_sel already changed from reset value: %d\n",
-				i, sel[i][0]);
+				  i, sel[i][0]);
 		}
 
 		if (sel[i][0] == sel[i][3])

drivers/clk/imx/clk-imx6sl.c

@@ -6,6 +6,7 @@
 #include <linux/bits.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/clk/imx.h>
 #include <linux/err.h>
 #include <linux/of.h>
 #include <linux/of_address.h>

drivers/clk/imx/clk-imx8mm.c

@@ -288,6 +288,11 @@ static const char *imx8mm_clko1_sels[] = {"osc_24m", "sys_pll1_800m", "dummy", "
 static const char *imx8mm_clko2_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll1_400m", "sys_pll2_166m",
 					  "sys_pll3_out", "audio_pll1_out", "video_pll1_out", "osc_32k", };
 
+static const char * const clkout_sels[] = {"audio_pll1_out", "audio_pll2_out", "video_pll1_out",
+					   "dummy", "dummy", "gpu_pll_out", "vpu_pll_out",
+					   "arm_pll_out", "sys_pll1", "sys_pll2", "sys_pll3",
+					   "dummy", "dummy", "osc_24m", "dummy", "osc_32k"};
+
 static struct clk_hw_onecell_data *clk_hw_data;
 static struct clk_hw **hws;
 
@@ -410,6 +415,13 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MM_SYS_PLL2_500M] = imx_clk_hw_fixed_factor("sys_pll2_500m", "sys_pll2_500m_cg", 1, 2);
 	hws[IMX8MM_SYS_PLL2_1000M] = imx_clk_hw_fixed_factor("sys_pll2_1000m", "sys_pll2_out", 1, 1);
 
+	hws[IMX8MM_CLK_CLKOUT1_SEL] = imx_clk_hw_mux("clkout1_sel", base + 0x128, 4, 4, clkout_sels, ARRAY_SIZE(clkout_sels));
+	hws[IMX8MM_CLK_CLKOUT1_DIV] = imx_clk_hw_divider("clkout1_div", "clkout1_sel", base + 0x128, 0, 4);
+	hws[IMX8MM_CLK_CLKOUT1] = imx_clk_hw_gate("clkout1", "clkout1_div", base + 0x128, 8);
+	hws[IMX8MM_CLK_CLKOUT2_SEL] = imx_clk_hw_mux("clkout2_sel", base + 0x128, 20, 4, clkout_sels, ARRAY_SIZE(clkout_sels));
+	hws[IMX8MM_CLK_CLKOUT2_DIV] = imx_clk_hw_divider("clkout2_div", "clkout2_sel", base + 0x128, 16, 4);
+	hws[IMX8MM_CLK_CLKOUT2] = imx_clk_hw_gate("clkout2", "clkout2_div", base + 0x128, 24);
+
 	np = dev->of_node;
 	base = devm_platform_ioremap_resource(pdev, 0);
 	if (WARN_ON(IS_ERR(base)))

drivers/clk/imx/clk-imx8mn.c

@@ -281,6 +281,11 @@ static const char * const imx8mn_clko2_sels[] = {"osc_24m", "sys_pll2_200m", "sy
 						 "sys_pll2_166m", "sys_pll3_out", "audio_pll1_out",
 						 "video_pll1_out", "osc_32k", };
 
+static const char * const clkout_sels[] = {"audio_pll1_out", "audio_pll2_out", "video_pll1_out",
+					   "dummy", "dummy", "gpu_pll_out", "dummy",
+					   "arm_pll_out", "sys_pll1", "sys_pll2", "sys_pll3",
+					   "dummy", "dummy", "osc_24m", "dummy", "osc_32k"};
+
 static struct clk_hw_onecell_data *clk_hw_data;
 static struct clk_hw **hws;
 
@@ -405,6 +410,13 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MN_SYS_PLL2_500M] = imx_clk_hw_fixed_factor("sys_pll2_500m", "sys_pll2_500m_cg", 1, 2);
 	hws[IMX8MN_SYS_PLL2_1000M] = imx_clk_hw_fixed_factor("sys_pll2_1000m", "sys_pll2_out", 1, 1);
 
+	hws[IMX8MN_CLK_CLKOUT1_SEL] = imx_clk_hw_mux("clkout1_sel", base + 0x128, 4, 4, clkout_sels, ARRAY_SIZE(clkout_sels));
+	hws[IMX8MN_CLK_CLKOUT1_DIV] = imx_clk_hw_divider("clkout1_div", "clkout1_sel", base + 0x128, 0, 4);
+	hws[IMX8MN_CLK_CLKOUT1] = imx_clk_hw_gate("clkout1", "clkout1_div", base + 0x128, 8);
+	hws[IMX8MN_CLK_CLKOUT2_SEL] = imx_clk_hw_mux("clkout2_sel", base + 0x128, 20, 4, clkout_sels, ARRAY_SIZE(clkout_sels));
+	hws[IMX8MN_CLK_CLKOUT2_DIV] = imx_clk_hw_divider("clkout2_div", "clkout2_sel", base + 0x128, 16, 4);
+	hws[IMX8MN_CLK_CLKOUT2] = imx_clk_hw_gate("clkout2", "clkout2_div", base + 0x128, 24);
+
 	np = dev->of_node;
 	base = devm_platform_ioremap_resource(pdev, 0);
 	if (WARN_ON(IS_ERR(base))) {

drivers/clk/imx/clk-imx8mq.c

@@ -270,6 +270,14 @@ static const char * const imx8mq_clko1_sels[] = {"osc_25m", "sys1_pll_800m", "os
 static const char * const imx8mq_clko2_sels[] = {"osc_25m", "sys2_pll_200m", "sys1_pll_400m", "sys2_pll_166m",
 					  "sys3_pll_out", "audio_pll1_out", "video_pll1_out", "ckil", };
 
+static const char * const pllout_monitor_sels[] = {"osc_25m", "osc_27m", "dummy", "dummy", "ckil",
+						   "audio_pll1_out_monitor", "audio_pll2_out_monitor",
+						   "video_pll1_out_monitor", "gpu_pll_out_monitor",
+						   "vpu_pll_out_monitor", "arm_pll_out_monitor",
+						   "sys_pll1_out_monitor", "sys_pll2_out_monitor",
+						   "sys_pll3_out_monitor", "dram_pll_out_monitor",
+						   "video_pll2_out_monitor", };
+
 static struct clk_hw_onecell_data *clk_hw_data;
 static struct clk_hw **hws;
 
@@ -399,6 +407,20 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MQ_SYS2_PLL_500M] = imx_clk_hw_fixed_factor("sys2_pll_500m", "sys2_pll_500m_cg", 1, 2);
 	hws[IMX8MQ_SYS2_PLL_1000M] = imx_clk_hw_fixed_factor("sys2_pll_1000m", "sys2_pll_1000m_cg", 1, 1);
 
+	hws[IMX8MQ_CLK_MON_AUDIO_PLL1_DIV] = imx_clk_hw_divider("audio_pll1_out_monitor", "audio_pll1_bypass", base + 0x78, 0, 3);
+	hws[IMX8MQ_CLK_MON_AUDIO_PLL2_DIV] = imx_clk_hw_divider("audio_pll2_out_monitor", "audio_pll2_bypass", base + 0x78, 4, 3);
+	hws[IMX8MQ_CLK_MON_VIDEO_PLL1_DIV] = imx_clk_hw_divider("video_pll1_out_monitor", "video_pll1_bypass", base + 0x78, 8, 3);
+	hws[IMX8MQ_CLK_MON_GPU_PLL_DIV] = imx_clk_hw_divider("gpu_pll_out_monitor", "gpu_pll_bypass", base + 0x78, 12, 3);
+	hws[IMX8MQ_CLK_MON_VPU_PLL_DIV] = imx_clk_hw_divider("vpu_pll_out_monitor", "vpu_pll_bypass", base + 0x78, 16, 3);
+	hws[IMX8MQ_CLK_MON_ARM_PLL_DIV] = imx_clk_hw_divider("arm_pll_out_monitor", "arm_pll_bypass", base + 0x78, 20, 3);
+	hws[IMX8MQ_CLK_MON_SYS_PLL1_DIV] = imx_clk_hw_divider("sys_pll1_out_monitor", "sys1_pll_out", base + 0x7c, 0, 3);
+	hws[IMX8MQ_CLK_MON_SYS_PLL2_DIV] = imx_clk_hw_divider("sys_pll2_out_monitor", "sys2_pll_out", base + 0x7c, 4, 3);
+	hws[IMX8MQ_CLK_MON_SYS_PLL3_DIV] = imx_clk_hw_divider("sys_pll3_out_monitor", "sys3_pll_out", base + 0x7c, 8, 3);
+	hws[IMX8MQ_CLK_MON_DRAM_PLL_DIV] = imx_clk_hw_divider("dram_pll_out_monitor", "dram_pll_out", base + 0x7c, 12, 3);
+	hws[IMX8MQ_CLK_MON_VIDEO_PLL2_DIV] = imx_clk_hw_divider("video_pll2_out_monitor", "video2_pll_out", base + 0x7c, 16, 3);
+	hws[IMX8MQ_CLK_MON_SEL] = imx_clk_hw_mux("pllout_monitor_sel", base + 0x74, 0, 4, pllout_monitor_sels, ARRAY_SIZE(pllout_monitor_sels));
+	hws[IMX8MQ_CLK_MON_CLK2_OUT] = imx_clk_hw_gate("pllout_monitor_clk2", "pllout_monitor_sel", base + 0x74, 4);
+
 	np = dev->of_node;
 	base = devm_platform_ioremap_resource(pdev, 0);
 	if (WARN_ON(IS_ERR(base)))

drivers/clk/imx/clk-imx8qxp.c

@@ -17,6 +17,14 @@
 #include <dt-bindings/clock/imx8-clock.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
+static const char *dc0_sels[] = {
+	"clk_dummy",
+	"clk_dummy",
+	"dc0_pll0_clk",
+	"dc0_pll1_clk",
+	"dc0_bypass0_clk",
+};
+
 static int imx8qxp_clk_probe(struct platform_device *pdev)
 {
 	struct device_node *ccm_node = pdev->dev.of_node;
@@ -115,12 +123,26 @@ static int imx8qxp_clk_probe(struct platform_device *pdev)
 	clks[IMX_CONN_USB2_LPM_CLK]	= imx_clk_scu("usb3_lpm_div", IMX_SC_R_USB_2, IMX_SC_PM_CLK_MISC, clk_cells);
 
 	/* Display controller SS */
-	clks[IMX_DC0_DISP0_CLK]		= imx_clk_scu("dc0_disp0_clk", IMX_SC_R_DC_0, IMX_SC_PM_CLK_MISC0, clk_cells);
+	clks[IMX_DC0_DISP0_CLK]		= imx_clk_scu2("dc0_disp0_clk", dc0_sels, ARRAY_SIZE(dc0_sels), IMX_SC_R_DC_0, IMX_SC_PM_CLK_MISC0, clk_cells);
-	clks[IMX_DC0_DISP1_CLK]		= imx_clk_scu("dc0_disp1_clk", IMX_SC_R_DC_0, IMX_SC_PM_CLK_MISC1, clk_cells);
+	clks[IMX_DC0_DISP1_CLK]		= imx_clk_scu2("dc0_disp1_clk", dc0_sels, ARRAY_SIZE(dc0_sels), IMX_SC_R_DC_0, IMX_SC_PM_CLK_MISC1, clk_cells);
+	clks[IMX_DC0_PLL0_CLK]		= imx_clk_scu("dc0_pll0_clk", IMX_SC_R_DC_0_PLL_0, IMX_SC_PM_CLK_PLL, clk_cells);
+	clks[IMX_DC0_PLL1_CLK]		= imx_clk_scu("dc0_pll1_clk", IMX_SC_R_DC_0_PLL_1, IMX_SC_PM_CLK_PLL, clk_cells);
+	clks[IMX_DC0_BYPASS0_CLK]	= imx_clk_scu("dc0_bypass0_clk", IMX_SC_R_DC_0_VIDEO0, IMX_SC_PM_CLK_BYPASS, clk_cells);
+	clks[IMX_DC0_BYPASS1_CLK]	= imx_clk_scu("dc0_bypass1_clk", IMX_SC_R_DC_0_VIDEO1, IMX_SC_PM_CLK_BYPASS, clk_cells);
 
 	/* MIPI-LVDS SS */
+	clks[IMX_MIPI0_LVDS_PIXEL_CLK]	= imx_clk_scu("mipi0_lvds_pixel_clk", IMX_SC_R_LVDS_0, IMX_SC_PM_CLK_MISC2, clk_cells);
+	clks[IMX_MIPI0_LVDS_BYPASS_CLK]	= imx_clk_scu("mipi0_lvds_bypass_clk", IMX_SC_R_LVDS_0, IMX_SC_PM_CLK_BYPASS, clk_cells);
+	clks[IMX_MIPI0_LVDS_PHY_CLK]	= imx_clk_scu("mipi0_lvds_phy_clk", IMX_SC_R_LVDS_0, IMX_SC_PM_CLK_MISC3, clk_cells);
 	clks[IMX_MIPI0_I2C0_CLK]	= imx_clk_scu("mipi0_i2c0_clk", IMX_SC_R_MIPI_0_I2C_0, IMX_SC_PM_CLK_MISC2, clk_cells);
 	clks[IMX_MIPI0_I2C1_CLK]	= imx_clk_scu("mipi0_i2c1_clk", IMX_SC_R_MIPI_0_I2C_1, IMX_SC_PM_CLK_MISC2, clk_cells);
+	clks[IMX_MIPI0_PWM0_CLK]	= imx_clk_scu("mipi0_pwm0_clk", IMX_SC_R_MIPI_0_PWM_0, IMX_SC_PM_CLK_PER, clk_cells);
+	clks[IMX_MIPI1_LVDS_PIXEL_CLK]	= imx_clk_scu("mipi1_lvds_pixel_clk", IMX_SC_R_LVDS_1, IMX_SC_PM_CLK_MISC2, clk_cells);
+	clks[IMX_MIPI1_LVDS_BYPASS_CLK]	= imx_clk_scu("mipi1_lvds_bypass_clk", IMX_SC_R_LVDS_1, IMX_SC_PM_CLK_BYPASS, clk_cells);
+	clks[IMX_MIPI1_LVDS_PHY_CLK]	= imx_clk_scu("mipi1_lvds_phy_clk", IMX_SC_R_LVDS_1, IMX_SC_PM_CLK_MISC3, clk_cells);
+	clks[IMX_MIPI1_I2C0_CLK]	= imx_clk_scu("mipi1_i2c0_clk", IMX_SC_R_MIPI_1_I2C_0, IMX_SC_PM_CLK_MISC2, clk_cells);
+	clks[IMX_MIPI1_I2C1_CLK]	= imx_clk_scu("mipi1_i2c1_clk", IMX_SC_R_MIPI_1_I2C_1, IMX_SC_PM_CLK_MISC2, clk_cells);
+	clks[IMX_MIPI1_PWM0_CLK]	= imx_clk_scu("mipi1_pwm0_clk", IMX_SC_R_MIPI_1_PWM_0, IMX_SC_PM_CLK_PER, clk_cells);
 
 	/* MIPI CSI SS */
 	clks[IMX_CSI0_CORE_CLK]		= imx_clk_scu("mipi_csi0_core_clk", IMX_SC_R_CSI_0, IMX_SC_PM_CLK_PER, clk_cells);

include/dt-bindings/clock/imx8-clock.h

@@ -64,6 +64,8 @@
 #define IMX_DC0_PLL1_CLK				81
 #define IMX_DC0_DISP0_CLK				82
 #define IMX_DC0_DISP1_CLK				83
+#define IMX_DC0_BYPASS0_CLK				84
+#define IMX_DC0_BYPASS1_CLK				85
 
 /* MIPI-LVDS SS */
 #define IMX_MIPI_IPG_CLK				90

include/dt-bindings/clock/imx8mm-clock.h

@@ -274,6 +274,14 @@
 
 #define IMX8MM_CLK_A53_CORE			251
 
-#define IMX8MM_CLK_END				252
+#define IMX8MM_CLK_CLKOUT1_SEL			252
+#define IMX8MM_CLK_CLKOUT1_DIV			253
+#define IMX8MM_CLK_CLKOUT1			254
+#define IMX8MM_CLK_CLKOUT2_SEL			255
+#define IMX8MM_CLK_CLKOUT2_DIV			256
+#define IMX8MM_CLK_CLKOUT2			257
+
+
+#define IMX8MM_CLK_END				258
 
 #endif

include/dt-bindings/clock/imx8mn-clock.h

@@ -234,6 +234,13 @@
 
 #define IMX8MN_CLK_A53_CORE			214
 
-#define IMX8MN_CLK_END				215
+#define IMX8MN_CLK_CLKOUT1_SEL			215
+#define IMX8MN_CLK_CLKOUT1_DIV			216
+#define IMX8MN_CLK_CLKOUT1			217
+#define IMX8MN_CLK_CLKOUT2_SEL			218
+#define IMX8MN_CLK_CLKOUT2_DIV			219
+#define IMX8MN_CLK_CLKOUT2			220
+
+#define IMX8MN_CLK_END				221
 
 #endif

include/dt-bindings/clock/imx8mq-clock.h

@@ -431,6 +431,20 @@
 
 #define IMX8MQ_CLK_A53_CORE			289
 
-#define IMX8MQ_CLK_END				290
+#define IMX8MQ_CLK_MON_AUDIO_PLL1_DIV		290
+#define IMX8MQ_CLK_MON_AUDIO_PLL2_DIV		291
+#define IMX8MQ_CLK_MON_VIDEO_PLL1_DIV		292
+#define IMX8MQ_CLK_MON_GPU_PLL_DIV		293
+#define IMX8MQ_CLK_MON_VPU_PLL_DIV		294
+#define IMX8MQ_CLK_MON_ARM_PLL_DIV		295
+#define IMX8MQ_CLK_MON_SYS_PLL1_DIV		296
+#define IMX8MQ_CLK_MON_SYS_PLL2_DIV		297
+#define IMX8MQ_CLK_MON_SYS_PLL3_DIV		298
+#define IMX8MQ_CLK_MON_DRAM_PLL_DIV		299
+#define IMX8MQ_CLK_MON_VIDEO_PLL2_DIV		300
+#define IMX8MQ_CLK_MON_SEL			301
+#define IMX8MQ_CLK_MON_CLK2_OUT			302
+
+#define IMX8MQ_CLK_END				303
 
 #endif /* __DT_BINDINGS_CLOCK_IMX8MQ_H */

include/linux/clk/imx.h

@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Freescale Semiconductor, Inc.
+ *
+ * Author: Lee Jones <lee.jones@linaro.org>
+ */
+
+#ifndef __LINUX_CLK_IMX_H
+#define __LINUX_CLK_IMX_H
+
+#include <linux/types.h>
+
+void imx6sl_set_wait_clk(bool enter);
+
+#endif