mirror of https://gitee.com/openkylin/linux.git
USB: usbtest - add shell script to test HCDs
This patch just adds the script available at http://www.linux-usb.org/usbtest/test.sh as is. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
David Brownell
Greg Kroah-Hartman
parent
084fb206a9
commit
c17d936e05
|
|
@ -0,0 +1,249 @@
|
|||
#!/bin/sh
|
||||
#
|
||||
# test types can be passed on the command line:
|
||||
#
|
||||
# - control: any device can do this
|
||||
# - out, in: out needs 'bulk sink' firmware, in needs 'bulk src'
|
||||
# - iso-out, iso-in: out needs 'iso sink' firmware, in needs 'iso src'
|
||||
# - halt: needs bulk sink+src, tests halt set/clear from host
|
||||
# - unlink: needs bulk sink and/or src, test HCD unlink processing
|
||||
# - loop: needs firmware that will buffer N transfers
|
||||
#
|
||||
# run it for hours, days, weeks.
|
||||
#
|
||||
|
||||
#
|
||||
# this default provides a steady test load for a bulk device
|
||||
#
|
||||
TYPES='control out in'
|
||||
#TYPES='control out in halt'
|
||||
|
||||
#
|
||||
# to test HCD code
|
||||
#
|
||||
# - include unlink tests
|
||||
# - add some ${RANDOM}ness
|
||||
# - connect several devices concurrently (same HC)
|
||||
# - keep HC's IRQ lines busy with unrelated traffic (IDE, net, ...)
|
||||
# - add other concurrent system loads
|
||||
#
|
||||
|
||||
declare -i COUNT BUFLEN
|
||||
|
||||
COUNT=50000
|
||||
BUFLEN=2048
|
||||
|
||||
# NOTE: the 'in' and 'out' cases are usually bulk, but can be
|
||||
# set up to use interrupt transfers by 'usbtest' module options
|
||||
|
||||
|
||||
if [ "$DEVICE" = "" ]; then
|
||||
echo "testing ALL recognized usbtest devices"
|
||||
echo ""
|
||||
TEST_ARGS="-a"
|
||||
else
|
||||
TEST_ARGS=""
|
||||
fi
|
||||
|
||||
do_test ()
|
||||
{
|
||||
if ! ./testusb $TEST_ARGS -s $BUFLEN -c $COUNT $* 2>/dev/null
|
||||
then
|
||||
echo "FAIL"
|
||||
exit 1
|
||||
fi
|
||||
}
|
||||
|
||||
ARGS="$*"
|
||||
|
||||
if [ "$ARGS" = "" ];
|
||||
then
|
||||
ARGS="$TYPES"
|
||||
fi
|
||||
|
||||
# FIXME use /sys/bus/usb/device/$THIS/bConfigurationValue to
|
||||
# check and change configs
|
||||
|
||||
CONFIG=''
|
||||
|
||||
check_config ()
|
||||
{
|
||||
if [ "$CONFIG" = "" ]; then
|
||||
CONFIG=$1
|
||||
echo "assuming $CONFIG configuration"
|
||||
return
|
||||
fi
|
||||
if [ "$CONFIG" = $1 ]; then
|
||||
return
|
||||
fi
|
||||
|
||||
echo "** device must be in $1 config, but it's $CONFIG instead"
|
||||
exit 1
|
||||
}
|
||||
|
||||
|
||||
echo "TESTING: $ARGS"
|
||||
|
||||
while : true
|
||||
do
|
||||
echo $(date)
|
||||
|
||||
for TYPE in $ARGS
|
||||
do
|
||||
# restore defaults
|
||||
COUNT=5000
|
||||
BUFLEN=2048
|
||||
|
||||
# FIXME automatically multiply COUNT by 10 when
|
||||
# /sys/bus/usb/device/$THIS/speed == "480"
|
||||
|
||||
# COUNT=50000
|
||||
|
||||
case $TYPE in
|
||||
control)
|
||||
# any device, in any configuration, can use this.
|
||||
echo '** Control test cases:'
|
||||
|
||||
echo "test 9: ch9 postconfig"
|
||||
do_test -t 9 -c 5000
|
||||
echo "test 10: control queueing"
|
||||
do_test -t 10 -c 5000
|
||||
|
||||
# this relies on some vendor-specific commands
|
||||
echo "test 14: control writes"
|
||||
do_test -t 14 -c 15000 -s 256 -v 1
|
||||
;;
|
||||
|
||||
out)
|
||||
check_config sink-src
|
||||
echo '** Host Write (OUT) test cases:'
|
||||
|
||||
echo "test 1: $COUNT transfers, same size"
|
||||
do_test -t 1
|
||||
echo "test 3: $COUNT transfers, variable/short size"
|
||||
do_test -t 3 -v 421
|
||||
|
||||
COUNT=2000
|
||||
echo "test 5: $COUNT scatterlists, same size entries"
|
||||
do_test -t 5
|
||||
|
||||
# try to trigger short OUT processing bugs
|
||||
echo "test 7a: $COUNT scatterlists, variable size/short entries"
|
||||
do_test -t 7 -v 579
|
||||
BUFLEN=4096
|
||||
echo "test 7b: $COUNT scatterlists, variable size/bigger entries"
|
||||
do_test -t 7 -v 41
|
||||
BUFLEN=64
|
||||
echo "test 7c: $COUNT scatterlists, variable size/micro entries"
|
||||
do_test -t 7 -v 63
|
||||
;;
|
||||
|
||||
iso-out)
|
||||
check_config sink-src
|
||||
echo '** Host ISOCHRONOUS Write (OUT) test cases:'
|
||||
|
||||
# at peak iso transfer rates:
|
||||
# - usb 2.0 high bandwidth, this is one frame.
|
||||
# - usb 1.1, it's twenty-four frames.
|
||||
BUFLEN=24500
|
||||
|
||||
COUNT=1000
|
||||
|
||||
# COUNT=10000
|
||||
|
||||
echo "test 15: $COUNT transfers, same size"
|
||||
# do_test -t 15 -g 3 -v 0
|
||||
BUFLEN=32768
|
||||
do_test -t 15 -g 8 -v 0
|
||||
|
||||
# FIXME it'd make sense to have an iso OUT test issuing
|
||||
# short writes on more packets than the last one
|
||||
|
||||
;;
|
||||
|
||||
in)
|
||||
check_config sink-src
|
||||
echo '** Host Read (IN) test cases:'
|
||||
|
||||
# NOTE: these "variable size" reads are just multiples
|
||||
# of 512 bytes, no EOVERFLOW testing is done yet
|
||||
|
||||
echo "test 2: $COUNT transfers, same size"
|
||||
do_test -t 2
|
||||
echo "test 4: $COUNT transfers, variable size"
|
||||
do_test -t 4
|
||||
|
||||
COUNT=2000
|
||||
echo "test 6: $COUNT scatterlists, same size entries"
|
||||
do_test -t 6
|
||||
echo "test 8: $COUNT scatterlists, variable size entries"
|
||||
do_test -t 8
|
||||
;;
|
||||
|
||||
iso-in)
|
||||
check_config sink-src
|
||||
echo '** Host ISOCHRONOUS Read (IN) test cases:'
|
||||
|
||||
# at peak iso transfer rates:
|
||||
# - usb 2.0 high bandwidth, this is one frame.
|
||||
# - usb 1.1, it's twenty-four frames.
|
||||
BUFLEN=24500
|
||||
|
||||
COUNT=1000
|
||||
|
||||
# COUNT=10000
|
||||
|
||||
echo "test 16: $COUNT transfers, same size"
|
||||
# do_test -t 16 -g 3 -v 0
|
||||
BUFLEN=32768
|
||||
do_test -t 16 -g 8 -v 0
|
||||
|
||||
# FIXME since iso expects faults, it'd make sense
|
||||
# to have an iso IN test issuing short reads ...
|
||||
|
||||
;;
|
||||
|
||||
halt)
|
||||
# NOTE: sometimes hardware doesn't cooperate well with halting
|
||||
# endpoints from the host side. so long as mass-storage class
|
||||
# firmware can halt them from the device, don't worry much if
|
||||
# you can't make this test work on your device.
|
||||
COUNT=2000
|
||||
echo "test 13: $COUNT halt set/clear"
|
||||
do_test -t 13
|
||||
;;
|
||||
|
||||
unlink)
|
||||
COUNT=2000
|
||||
echo "test 11: $COUNT read unlinks"
|
||||
do_test -t 11
|
||||
|
||||
echo "test 12: $COUNT write unlinks"
|
||||
do_test -t 12
|
||||
;;
|
||||
|
||||
loop)
|
||||
# defaults need too much buffering for ez-usb devices
|
||||
BUFLEN=2048
|
||||
COUNT=32
|
||||
|
||||
# modprobe g_zero qlen=$COUNT buflen=$BUFLEN loopdefault
|
||||
check_config loopback
|
||||
|
||||
# FIXME someone needs to write and merge a version of this
|
||||
|
||||
echo "write $COUNT buffers of $BUFLEN bytes, read them back"
|
||||
|
||||
echo "write $COUNT variable size buffers, read them back"
|
||||
|
||||
;;
|
||||
|
||||
*)
|
||||
echo "Don't understand test type $TYPE"
|
||||
exit 1;
|
||||
esac
|
||||
echo ''
|
||||
done
|
||||
done
|
||||
|
||||
# vim: sw=4
|
||||
Loading…
Reference in New Issue