mirror of https://gitee.com/openkylin/linux.git
ARM: dts: imx6: Add support for imx6q dmo edmqmx6
Signed-off-by: Silvio F <silvio.fricke@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This commit is contained in:
Silvio F
Shawn Guo
parent
155bae4eda
commit
c1f77e73a8
|
|
@ -164,6 +164,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
|
|||
imx6q-arm2.dtb \
|
||||
imx6q-cm-fx6.dtb \
|
||||
imx6q-cubox-i.dtb \
|
||||
imx6q-dmo-edmqmx6.dtb \
|
||||
imx6q-gw51xx.dtb \
|
||||
imx6q-gw52xx.dtb \
|
||||
imx6q-gw53xx.dtb \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,372 @@
|
|||
/*
|
||||
* Copyright 2013 Data Modul AG
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "imx6q.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Data Modul eDM-QMX6 Board";
|
||||
compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
|
||||
|
||||
aliases {
|
||||
gpio7 = &stmpe_gpio;
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x10000000 0x80000000>;
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
reg_3p3v: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_usb_otg_vbus: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio7 12 0>;
|
||||
};
|
||||
|
||||
reg_usb_host1: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "usb_host1_en";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio3 31 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-blue {
|
||||
label = "blue";
|
||||
gpios = <&stmpe_gpio 8 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led-green {
|
||||
label = "green";
|
||||
gpios = <&stmpe_gpio 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led-pink {
|
||||
label = "pink";
|
||||
gpios = <&stmpe_gpio 10 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led-red {
|
||||
label = "red";
|
||||
gpios = <&stmpe_gpio 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&fec {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet>;
|
||||
phy-mode = "rgmii";
|
||||
phy-reset-gpios = <&gpio3 23 0>;
|
||||
phy-supply = <&vgen2_1v2_eth>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2
|
||||
&pinctrl_stmpe>;
|
||||
status = "okay";
|
||||
|
||||
pmic: pfuze100@08 {
|
||||
compatible = "fsl,pfuze100";
|
||||
reg = <0x08>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <20 8>;
|
||||
|
||||
regulators {
|
||||
sw1a_reg: sw1ab {
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <1875000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw1c_reg: sw1c {
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <1875000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw2_reg: sw2 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw3a_reg: sw3a {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <1975000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw3b_reg: sw3b {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <1975000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw4_reg: sw4 {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <1975000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
swbst_reg: swbst {
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5150000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
snvs_reg: vsnvs {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vref_reg: vrefddr {
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen1_reg: vgen1 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1550000>;
|
||||
};
|
||||
|
||||
vgen2_1v2_eth: vgen2 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1550000>;
|
||||
};
|
||||
|
||||
vdd_high_in: vgen3 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen4_reg: vgen4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen5_reg: vgen5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen6_reg: vgen6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
stmpe: stmpe1601@40 {
|
||||
compatible = "st,stmpe1601";
|
||||
reg = <0x40>;
|
||||
interrupts = <30 0>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
|
||||
stmpe_gpio: stmpe_gpio {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "st,stmpe-gpio";
|
||||
};
|
||||
};
|
||||
|
||||
temp1: ad7414@4c {
|
||||
compatible = "ad,ad7414";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
|
||||
temp2: ad7414@4d {
|
||||
compatible = "ad,ad7414";
|
||||
reg = <0x4d>;
|
||||
};
|
||||
|
||||
rtc: m41t62@68 {
|
||||
compatible = "stm,m41t62";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_hog>;
|
||||
|
||||
imx6q-dmo-edmqmx6 {
|
||||
pinctrl_hog: hoggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
|
||||
MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_enet: enetgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
|
||||
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
||||
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
||||
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
||||
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2: i2c2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_stmpe: stmpegrp {
|
||||
fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
|
||||
};
|
||||
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart2: uart2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg: usbotggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3: usdhc3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
||||
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
||||
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
||||
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
||||
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
||||
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc4: usdhc4grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
|
||||
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
|
||||
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
|
||||
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
|
||||
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
|
||||
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
|
||||
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
|
||||
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
|
||||
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
|
||||
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
|
||||
>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh1 {
|
||||
vbus-supply = <®_usb_host1>;
|
||||
disable-over-current;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg {
|
||||
vbus-supply = <®_usb_otg_vbus>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbotg>;
|
||||
disable-over-current;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc3>;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc4>;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
non-removable;
|
||||
bus-width = <8>;
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue