Merge 4.3-rc4 into char-misc-next

This is needed due to the duplicated iommu stuff to help with the merge
and to prevent future issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/Changes

@@ -43,7 +43,7 @@ o  udev                   081                     # udevd --version
 o  grub                   0.93                    # grub --version || grub-install --version
 o  mcelog                 0.6                     # mcelog --version
 o  iptables               1.4.2                   # iptables -V
-o  openssl & libcrypto    1.0.1k                  # openssl version
+o  openssl & libcrypto    1.0.0                   # openssl version
 
 
 Kernel compilation

Documentation/devicetree/bindings/input/cypress,cyapa.txt

@@ -25,7 +25,7 @@ Example:
 		/* Cypress Gen3 touchpad */
 		touchpad@67 {
 			compatible = "cypress,cyapa";
-			reg = <0x24>;
+			reg = <0x67>;
 			interrupt-parent = <&gpio>;
 			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;	/* GPIO 2 */
 			wakeup-source;

Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt

@@ -4,8 +4,8 @@ The MISC interrupt controller is a secondary controller for lower priority
 interrupt.
 
 Required Properties:
-- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc"
+- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc" or
-  as fallback
+  "qca,<soctype>-cpu-intc", "qca,ar7240-misc-intc"
 - reg: Base address and size of the controllers memory area
 - interrupt-parent: phandle of the parent interrupt controller.
 - interrupts: Interrupt specifier for the controllers interrupt.
@@ -13,6 +13,9 @@ Required Properties:
 - #interrupt-cells : Specifies the number of cells needed to encode interrupt
 		     source, should be 1
 
+Compatible fallback depends on the SoC. Use ar7100 for ar71xx and ar913x,
+use ar7240 for all other SoCs.
+
 Please refer to interrupts.txt in this directory for details of the common
 Interrupt Controllers bindings used by client devices.
 
@@ -28,3 +31,16 @@ Example:
 		interrupt-controller;
 		#interrupt-cells = <1>;
 	};
+
+Another example:
+
+	interrupt-controller@18060010 {
+		compatible = "qca,ar9331-misc-intc", qca,ar7240-misc-intc";
+		reg = <0x18060010 0x4>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <6>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};

Documentation/input/multi-touch-protocol.txt

@@ -361,7 +361,7 @@ For win8 devices with both T and C coordinates, the position mapping is
    ABS_MT_POSITION_X := T_X
    ABS_MT_POSITION_Y := T_Y
    ABS_MT_TOOL_X := C_X
-   ABS_MT_TOOL_X := C_Y
+   ABS_MT_TOOL_Y := C_Y
 
 Unfortunately, there is not enough information to specify both the touching
 ellipse and the tool ellipse, so one has to resort to approximations.  One

Documentation/power/pci.txt

@@ -979,20 +979,45 @@ every time right after the runtime_resume() callback has returned
 (alternatively, the runtime_suspend() callback will have to check if the
 device should really be suspended and return -EAGAIN if that is not the case).
 
-The runtime PM of PCI devices is disabled by default.  It is also blocked by
+The runtime PM of PCI devices is enabled by default by the PCI core.  PCI
-pci_pm_init() that runs the pm_runtime_forbid() helper function.  If a PCI
+device drivers do not need to enable it and should not attempt to do so.
-driver implements the runtime PM callbacks and intends to use the runtime PM
+However, it is blocked by pci_pm_init() that runs the pm_runtime_forbid()
-framework provided by the PM core and the PCI subsystem, it should enable this
+helper function.  In addition to that, the runtime PM usage counter of
-feature by executing the pm_runtime_enable() helper function.  However, the
+each PCI device is incremented by local_pci_probe() before executing the
-driver should not call the pm_runtime_allow() helper function unblocking
+probe callback provided by the device's driver.
-the runtime PM of the device.  Instead, it should allow user space or some
+
-platform-specific code to do that (user space can do it via sysfs), although
+If a PCI driver implements the runtime PM callbacks and intends to use the
-once it has called pm_runtime_enable(), it must be prepared to handle the
+runtime PM framework provided by the PM core and the PCI subsystem, it needs
+to decrement the device's runtime PM usage counter in its probe callback
+function.  If it doesn't do that, the counter will always be different from
+zero for the device and it will never be runtime-suspended.  The simplest
+way to do that is by calling pm_runtime_put_noidle(), but if the driver
+wants to schedule an autosuspend right away, for example, it may call
+pm_runtime_put_autosuspend() instead for this purpose.  Generally, it
+just needs to call a function that decrements the devices usage counter
+from its probe routine to make runtime PM work for the device.
+
+It is important to remember that the driver's runtime_suspend() callback
+may be executed right after the usage counter has been decremented, because
+user space may already have cuased the pm_runtime_allow() helper function
+unblocking the runtime PM of the device to run via sysfs, so the driver must
+be prepared to cope with that.
+
+The driver itself should not call pm_runtime_allow(), though.  Instead, it
+should let user space or some platform-specific code do that (user space can
+do it via sysfs as stated above), but it must be prepared to handle the
 runtime PM of the device correctly as soon as pm_runtime_allow() is called
-(which may happen at any time).  [It also is possible that user space causes
+(which may happen at any time, even before the driver is loaded).
-pm_runtime_allow() to be called via sysfs before the driver is loaded, so in
+
-fact the driver has to be prepared to handle the runtime PM of the device as
+When the driver's remove callback runs, it has to balance the decrementation
-soon as it calls pm_runtime_enable().]
+of the device's runtime PM usage counter at the probe time.  For this reason,
+if it has decremented the counter in its probe callback, it must run
+pm_runtime_get_noresume() in its remove callback.  [Since the core carries
+out a runtime resume of the device and bumps up the device's usage counter
+before running the driver's remove callback, the runtime PM of the device
+is effectively disabled for the duration of the remove execution and all
+runtime PM helper functions incrementing the device's usage counter are
+then effectively equivalent to pm_runtime_get_noresume().]
 
 The runtime PM framework works by processing requests to suspend or resume
 devices, or to check if they are idle (in which cases it is reasonable to

Documentation/ptp/testptp.c

@@ -18,6 +18,7 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #define _GNU_SOURCE
+#define __SANE_USERSPACE_TYPES__        /* For PPC64, to get LL64 types */
 #include <errno.h>
 #include <fcntl.h>
 #include <inttypes.h>

MAINTAINERS

@@ -5963,7 +5963,7 @@ F:	virt/kvm/
 KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
 M:	Joerg Roedel <joro@8bytes.org>
 L:	kvm@vger.kernel.org
-W:	http://kvm.qumranet.com
+W:	http://www.linux-kvm.org/
 S:	Maintained
 F:	arch/x86/include/asm/svm.h
 F:	arch/x86/kvm/svm.c
@@ -5971,7 +5971,7 @@ F:	arch/x86/kvm/svm.c
 KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
 M:	Alexander Graf <agraf@suse.com>
 L:	kvm-ppc@vger.kernel.org
-W:	http://kvm.qumranet.com
+W:	http://www.linux-kvm.org/
 T:	git git://github.com/agraf/linux-2.6.git
 S:	Supported
 F:	arch/powerpc/include/asm/kvm*

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*

arch/arc/include/asm/Kbuild

@@ -48,4 +48,5 @@ generic-y += types.h
 generic-y += ucontext.h
 generic-y += user.h
 generic-y += vga.h
+generic-y += word-at-a-time.h
 generic-y += xor.h

arch/arm64/include/asm/pgtable.h

@@ -79,7 +79,7 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
 #define PAGE_S2			__pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_NORMAL) | PTE_S2_RDONLY)
 #define PAGE_S2_DEVICE		__pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_DEVICE_nGnRE) | PTE_S2_RDONLY | PTE_UXN)
 
-#define PAGE_NONE		__pgprot(((_PAGE_DEFAULT) & ~PTE_TYPE_MASK) | PTE_PROT_NONE | PTE_PXN | PTE_UXN)
+#define PAGE_NONE		__pgprot(((_PAGE_DEFAULT) & ~PTE_VALID) | PTE_PROT_NONE | PTE_PXN | PTE_UXN)
 #define PAGE_SHARED		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE)
 #define PAGE_SHARED_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_WRITE)
 #define PAGE_COPY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
@@ -496,7 +496,7 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long addr)
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY |
-			      PTE_PROT_NONE | PTE_WRITE | PTE_TYPE_MASK;
+			      PTE_PROT_NONE | PTE_VALID | PTE_WRITE;
 	/* preserve the hardware dirty information */
 	if (pte_hw_dirty(pte))
 		pte = pte_mkdirty(pte);

arch/arm64/kernel/efi.c

@@ -258,7 +258,8 @@ static bool __init efi_virtmap_init(void)
 		 */
 		if (!is_normal_ram(md))
 			prot = __pgprot(PROT_DEVICE_nGnRE);
-		else if (md->type == EFI_RUNTIME_SERVICES_CODE)
+		else if (md->type == EFI_RUNTIME_SERVICES_CODE ||
+			 !PAGE_ALIGNED(md->phys_addr))
 			prot = PAGE_KERNEL_EXEC;
 		else
 			prot = PAGE_KERNEL;

arch/arm64/kernel/entry-ftrace.S

@@ -178,6 +178,24 @@ ENTRY(ftrace_stub)
 ENDPROC(ftrace_stub)
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/* save return value regs*/
+	.macro save_return_regs
+	sub sp, sp, #64
+	stp x0, x1, [sp]
+	stp x2, x3, [sp, #16]
+	stp x4, x5, [sp, #32]
+	stp x6, x7, [sp, #48]
+	.endm
+
+	/* restore return value regs*/
+	.macro restore_return_regs
+	ldp x0, x1, [sp]
+	ldp x2, x3, [sp, #16]
+	ldp x4, x5, [sp, #32]
+	ldp x6, x7, [sp, #48]
+	add sp, sp, #64
+	.endm
+
 /*
  * void ftrace_graph_caller(void)
  *
@@ -204,11 +222,11 @@ ENDPROC(ftrace_graph_caller)
  * only when CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST is enabled.
  */
 ENTRY(return_to_handler)
-	str	x0, [sp, #-16]!
+	save_return_regs
 	mov	x0, x29			//     parent's fp
 	bl	ftrace_return_to_handler// addr = ftrace_return_to_hander(fp);
 	mov	x30, x0			// restore the original return address
-	ldr	x0, [sp], #16
+	restore_return_regs
 	ret
 END(return_to_handler)
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */

arch/avr32/include/asm/Kbuild

@@ -20,4 +20,5 @@ generic-y += sections.h
 generic-y += topology.h
 generic-y += trace_clock.h
 generic-y += vga.h
+generic-y += word-at-a-time.h
 generic-y += xor.h

arch/blackfin/include/asm/Kbuild

@@ -46,4 +46,5 @@ generic-y += types.h
 generic-y += ucontext.h
 generic-y += unaligned.h
 generic-y += user.h
+generic-y += word-at-a-time.h
 generic-y += xor.h

arch/c6x/include/asm/Kbuild

@@ -59,4 +59,5 @@ generic-y += types.h
 generic-y += ucontext.h
 generic-y += user.h
 generic-y += vga.h
+generic-y += word-at-a-time.h
 generic-y += xor.h

arch/cris/include/asm/Kbuild

@@ -43,4 +43,5 @@ generic-y += topology.h
 generic-y += trace_clock.h
 generic-y += types.h
 generic-y += vga.h
+generic-y += word-at-a-time.h
 generic-y += xor.h

arch/frv/include/asm/Kbuild

@@ -7,3 +7,4 @@ generic-y += mcs_spinlock.h
 generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += trace_clock.h
+generic-y += word-at-a-time.h

arch/hexagon/include/asm/Kbuild

@@ -58,4 +58,5 @@ generic-y += types.h
 generic-y += ucontext.h
 generic-y += unaligned.h
 generic-y += vga.h
+generic-y += word-at-a-time.h
 generic-y += xor.h

arch/ia64/include/asm/Kbuild

@@ -8,3 +8,4 @@ generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += trace_clock.h
 generic-y += vtime.h
+generic-y += word-at-a-time.h

arch/m32r/include/asm/Kbuild

@@ -9,3 +9,4 @@ generic-y += module.h
 generic-y += preempt.h
 generic-y += sections.h
 generic-y += trace_clock.h
+generic-y += word-at-a-time.h

arch/m68k/configs/amiga_defconfig

@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -57,7 +58,6 @@ CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
-CONFIG_GENEVE_CORE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -67,10 +67,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
 CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
@@ -179,6 +181,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
 CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_DUP_IPV4=m
 CONFIG_NF_TABLES_ARP=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
@@ -206,6 +209,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_NFT_MASQ_IPV6=m
 CONFIG_NFT_REDIR_IPV6=m
@@ -271,6 +275,7 @@ CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
+CONFIG_MPLS_IPTUNNEL=m
 # CONFIG_WIRELESS is not set
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -370,6 +375,7 @@ CONFIG_ZORRO8390=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -537,6 +543,7 @@ CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
+CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m

arch/m68k/configs/apollo_defconfig

@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -55,7 +56,6 @@ CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
-CONFIG_GENEVE_CORE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -65,10 +65,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
 CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
@@ -177,6 +179,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
 CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_DUP_IPV4=m
 CONFIG_NF_TABLES_ARP=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
@@ -204,6 +207,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_NFT_MASQ_IPV6=m
 CONFIG_NFT_REDIR_IPV6=m
@@ -269,6 +273,7 @@ CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
+CONFIG_MPLS_IPTUNNEL=m
 # CONFIG_WIRELESS is not set
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -344,6 +349,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -495,6 +501,7 @@ CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
+CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m

arch/m68k/configs/atari_defconfig

@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -55,7 +56,6 @@ CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
-CONFIG_GENEVE_CORE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -65,10 +65,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
 CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
@@ -177,6 +179,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
 CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_DUP_IPV4=m
 CONFIG_NF_TABLES_ARP=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
@@ -204,6 +207,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_NFT_MASQ_IPV6=m
 CONFIG_NFT_REDIR_IPV6=m
@@ -269,6 +273,7 @@ CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
+CONFIG_MPLS_IPTUNNEL=m
 # CONFIG_WIRELESS is not set
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -355,6 +360,7 @@ CONFIG_NE2000=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 CONFIG_SMC91X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -517,6 +523,7 @@ CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
+CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m

arch/m68k/configs/bvme6000_defconfig

@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -53,7 +54,6 @@ CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
-CONFIG_GENEVE_CORE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -63,10 +63,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
 CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
@@ -175,6 +177,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
 CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_DUP_IPV4=m
 CONFIG_NF_TABLES_ARP=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
@@ -202,6 +205,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_NFT_MASQ_IPV6=m
 CONFIG_NFT_REDIR_IPV6=m
@@ -267,6 +271,7 @@ CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
+CONFIG_MPLS_IPTUNNEL=m
 # CONFIG_WIRELESS is not set
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -343,6 +348,7 @@ CONFIG_BVME6000_NET=y
 # CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -488,6 +494,7 @@ CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
+CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m

arch/m68k/configs/hp300_defconfig

@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -55,7 +56,6 @@ CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
-CONFIG_GENEVE_CORE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -65,10 +65,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
 CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
@@ -177,6 +179,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
 CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_DUP_IPV4=m
 CONFIG_NF_TABLES_ARP=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
@@ -204,6 +207,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_NFT_MASQ_IPV6=m
 CONFIG_NFT_REDIR_IPV6=m
@@ -269,6 +273,7 @@ CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
+CONFIG_MPLS_IPTUNNEL=m
 # CONFIG_WIRELESS is not set
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -345,6 +350,7 @@ CONFIG_HPLANCE=y
 # CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -497,6 +503,7 @@ CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
+CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m

arch/m68k/configs/mac_defconfig

@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -54,7 +55,6 @@ CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
-CONFIG_GENEVE_CORE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -64,10 +64,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
 CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
@@ -176,6 +178,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
 CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_DUP_IPV4=m
 CONFIG_NF_TABLES_ARP=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
@@ -203,6 +206,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_NFT_MASQ_IPV6=m
 CONFIG_NFT_REDIR_IPV6=m
@@ -271,6 +275,7 @@ CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
+CONFIG_MPLS_IPTUNNEL=m
 # CONFIG_WIRELESS is not set
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -364,6 +369,7 @@ CONFIG_MAC8390=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -519,6 +525,7 @@ CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
+CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m

arch/m68k/configs/multi_defconfig

@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -64,7 +65,6 @@ CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
-CONFIG_GENEVE_CORE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -74,10 +74,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
 CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
@@ -186,6 +188,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
 CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_DUP_IPV4=m
 CONFIG_NF_TABLES_ARP=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
@@ -213,6 +216,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_NFT_MASQ_IPV6=m
 CONFIG_NFT_REDIR_IPV6=m
@@ -281,6 +285,7 @@ CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
+CONFIG_MPLS_IPTUNNEL=m
 # CONFIG_WIRELESS is not set
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -410,6 +415,7 @@ CONFIG_ZORRO8390=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 CONFIG_SMC91X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PLIP=m
@@ -599,6 +605,7 @@ CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
+CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m

arch/m68k/configs/mvme147_defconfig

@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -52,7 +53,6 @@ CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
-CONFIG_GENEVE_CORE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -62,10 +62,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
 CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
@@ -174,6 +176,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
 CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_DUP_IPV4=m
 CONFIG_NF_TABLES_ARP=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
@@ -201,6 +204,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_NFT_MASQ_IPV6=m
 CONFIG_NFT_REDIR_IPV6=m
@@ -266,6 +270,7 @@ CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
+CONFIG_MPLS_IPTUNNEL=m
 # CONFIG_WIRELESS is not set
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -343,6 +348,7 @@ CONFIG_MVME147_NET=y
 # CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -488,6 +494,7 @@ CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
+CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m

arch/m68k/configs/mvme16x_defconfig

@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -53,7 +54,6 @@ CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
-CONFIG_GENEVE_CORE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -63,10 +63,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
 CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
@@ -175,6 +177,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
 CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_DUP_IPV4=m
 CONFIG_NF_TABLES_ARP=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
@@ -202,6 +205,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_NFT_MASQ_IPV6=m
 CONFIG_NFT_REDIR_IPV6=m
@@ -267,6 +271,7 @@ CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
+CONFIG_MPLS_IPTUNNEL=m
 # CONFIG_WIRELESS is not set
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -343,6 +348,7 @@ CONFIG_MVME16x_NET=y
 # CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -488,6 +494,7 @@ CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
+CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m

arch/m68k/configs/q40_defconfig

@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -53,7 +54,6 @@ CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
-CONFIG_GENEVE_CORE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -63,10 +63,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
 CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
@@ -175,6 +177,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
 CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_DUP_IPV4=m
 CONFIG_NF_TABLES_ARP=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
@@ -202,6 +205,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_NFT_MASQ_IPV6=m
 CONFIG_NFT_REDIR_IPV6=m
@@ -267,6 +271,7 @@ CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
+CONFIG_MPLS_IPTUNNEL=m
 # CONFIG_WIRELESS is not set
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -354,6 +359,7 @@ CONFIG_NE2000=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PLIP=m
@@ -510,6 +516,7 @@ CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
+CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m

arch/m68k/configs/sun3_defconfig

@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -50,7 +51,6 @@ CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
-CONFIG_GENEVE_CORE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -60,10 +60,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
 CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
@@ -172,6 +174,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
 CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_DUP_IPV4=m
 CONFIG_NF_TABLES_ARP=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
@@ -199,6 +202,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_NFT_MASQ_IPV6=m
 CONFIG_NFT_REDIR_IPV6=m
@@ -264,6 +268,7 @@ CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
+CONFIG_MPLS_IPTUNNEL=m
 # CONFIG_WIRELESS is not set
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -341,6 +346,7 @@ CONFIG_SUN3_82586=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -489,6 +495,7 @@ CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
+CONFIG_TEST_STATIC_KEYS=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y

arch/m68k/configs/sun3x_defconfig

@@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_USERFAULTFD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -50,7 +51,6 @@ CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
-CONFIG_GENEVE_CORE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -60,10 +60,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
+CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
 CONFIG_IPV6_GRE=m
 CONFIG_NETFILTER=y
@@ -172,6 +174,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
 CONFIG_IP_SET_LIST_SET=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_DUP_IPV4=m
 CONFIG_NF_TABLES_ARP=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
@@ -199,6 +202,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_NFT_MASQ_IPV6=m
 CONFIG_NFT_REDIR_IPV6=m
@@ -264,6 +268,7 @@ CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
+CONFIG_MPLS_IPTUNNEL=m
 # CONFIG_WIRELESS is not set
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -341,6 +346,7 @@ CONFIG_SUN3LANCE=y
 # CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -489,6 +495,7 @@ CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
+CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m

arch/m68k/include/asm/linkage.h

@@ -4,4 +4,34 @@
 #define __ALIGN .align 4
 #define __ALIGN_STR ".align 4"
 
+/*
+ * Make sure the compiler doesn't do anything stupid with the
+ * arguments on the stack - they are owned by the *caller*, not
+ * the callee. This just fools gcc into not spilling into them,
+ * and keeps it from doing tailcall recursion and/or using the
+ * stack slots for temporaries, since they are live and "used"
+ * all the way to the end of the function.
+ */
+#define asmlinkage_protect(n, ret, args...) \
+	__asmlinkage_protect##n(ret, ##args)
+#define __asmlinkage_protect_n(ret, args...) \
+	__asm__ __volatile__ ("" : "=r" (ret) : "0" (ret), ##args)
+#define __asmlinkage_protect0(ret) \
+	__asmlinkage_protect_n(ret)
+#define __asmlinkage_protect1(ret, arg1) \
+	__asmlinkage_protect_n(ret, "m" (arg1))
+#define __asmlinkage_protect2(ret, arg1, arg2) \
+	__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2))
+#define __asmlinkage_protect3(ret, arg1, arg2, arg3) \
+	__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3))
+#define __asmlinkage_protect4(ret, arg1, arg2, arg3, arg4) \
+	__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
+			      "m" (arg4))
+#define __asmlinkage_protect5(ret, arg1, arg2, arg3, arg4, arg5) \
+	__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
+			      "m" (arg4), "m" (arg5))
+#define __asmlinkage_protect6(ret, arg1, arg2, arg3, arg4, arg5, arg6) \
+	__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
+			      "m" (arg4), "m" (arg5), "m" (arg6))
+
 #endif

arch/m68k/include/asm/unistd.h

@@ -4,7 +4,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define NR_syscalls		356
+#define NR_syscalls		375
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT

arch/m68k/include/uapi/asm/unistd.h

@@ -361,5 +361,24 @@
 #define __NR_memfd_create	353
 #define __NR_bpf		354
 #define __NR_execveat		355
+#define __NR_socket		356
+#define __NR_socketpair		357
+#define __NR_bind		358
+#define __NR_connect		359
+#define __NR_listen		360
+#define __NR_accept4		361
+#define __NR_getsockopt		362
+#define __NR_setsockopt		363
+#define __NR_getsockname	364
+#define __NR_getpeername	365
+#define __NR_sendto		366
+#define __NR_sendmsg		367
+#define __NR_recvfrom		368
+#define __NR_recvmsg		369
+#define __NR_shutdown		370
+#define __NR_recvmmsg		371
+#define __NR_sendmmsg		372
+#define __NR_userfaultfd	373
+#define __NR_membarrier		374
 
 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */

arch/m68k/kernel/syscalltable.S

@@ -376,4 +376,22 @@ ENTRY(sys_call_table)
 	.long sys_memfd_create
 	.long sys_bpf
 	.long sys_execveat		/* 355 */
-
+	.long sys_socket
+	.long sys_socketpair
+	.long sys_bind
+	.long sys_connect
+	.long sys_listen		/* 360 */
+	.long sys_accept4
+	.long sys_getsockopt
+	.long sys_setsockopt
+	.long sys_getsockname
+	.long sys_getpeername		/* 365 */
+	.long sys_sendto
+	.long sys_sendmsg
+	.long sys_recvfrom
+	.long sys_recvmsg
+	.long sys_shutdown		/* 370 */
+	.long sys_recvmmsg
+	.long sys_sendmmsg
+	.long sys_userfaultfd
+	.long sys_membarrier

arch/metag/include/asm/Kbuild

@@ -54,4 +54,5 @@ generic-y += ucontext.h
 generic-y += unaligned.h
 generic-y += user.h
 generic-y += vga.h
+generic-y += word-at-a-time.h
 generic-y += xor.h

arch/microblaze/include/asm/Kbuild

@@ -10,3 +10,4 @@ generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += syscalls.h
 generic-y += trace_clock.h
+generic-y += word-at-a-time.h

arch/mips/ath79/irq.c

@@ -293,8 +293,26 @@ static int __init ath79_misc_intc_of_init(
 
 	return 0;
 }
-IRQCHIP_DECLARE(ath79_misc_intc, "qca,ar7100-misc-intc",
+
-		ath79_misc_intc_of_init);
+static int __init ar7100_misc_intc_of_init(
+	struct device_node *node, struct device_node *parent)
+{
+	ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
+	return ath79_misc_intc_of_init(node, parent);
+}
+
+IRQCHIP_DECLARE(ar7100_misc_intc, "qca,ar7100-misc-intc",
+		ar7100_misc_intc_of_init);
+
+static int __init ar7240_misc_intc_of_init(
+	struct device_node *node, struct device_node *parent)
+{
+	ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
+	return ath79_misc_intc_of_init(node, parent);
+}
+
+IRQCHIP_DECLARE(ar7240_misc_intc, "qca,ar7240-misc-intc",
+		ar7240_misc_intc_of_init);
 
 static int __init ar79_cpu_intc_of_init(
 	struct device_node *node, struct device_node *parent)

arch/mips/cavium-octeon/setup.c

@@ -933,7 +933,7 @@ void __init plat_mem_setup(void)
 	while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX)
 		&& (total < MAX_MEMORY)) {
 		memory = cvmx_bootmem_phy_alloc(mem_alloc_size,
-						__pa_symbol(&__init_end), -1,
+						__pa_symbol(&_end), -1,
 						0x100000,
 						CVMX_BOOTMEM_FLAG_NO_LOCKING);
 		if (memory >= 0) {

arch/mips/include/asm/Kbuild

@@ -17,4 +17,5 @@ generic-y += segment.h
 generic-y += serial.h
 generic-y += trace_clock.h
 generic-y += user.h
+generic-y += word-at-a-time.h
 generic-y += xor.h

arch/mips/include/asm/cpu-features.h

@@ -20,6 +20,9 @@
 #ifndef cpu_has_tlb
 #define cpu_has_tlb		(cpu_data[0].options & MIPS_CPU_TLB)
 #endif
+#ifndef cpu_has_ftlb
+#define cpu_has_ftlb		(cpu_data[0].options & MIPS_CPU_FTLB)
+#endif
 #ifndef cpu_has_tlbinv
 #define cpu_has_tlbinv		(cpu_data[0].options & MIPS_CPU_TLBINV)
 #endif

arch/mips/include/asm/cpu.h

@@ -385,6 +385,7 @@ enum cpu_type_enum {
 #define MIPS_CPU_CDMM		0x4000000000ull	/* CPU has Common Device Memory Map */
 #define MIPS_CPU_BP_GHIST	0x8000000000ull /* R12K+ Branch Prediction Global History */
 #define MIPS_CPU_SP		0x10000000000ull /* Small (1KB) page support */
+#define MIPS_CPU_FTLB		0x20000000000ull /* CPU has Fixed-page-size TLB */
 
 /*
  * CPU ASE encodings

arch/mips/include/asm/maar.h

@@ -65,6 +65,15 @@ static inline void write_maar_pair(unsigned idx, phys_addr_t lower,
 	back_to_back_c0_hazard();
 }
 
+/**
+ * maar_init() - initialise MAARs
+ *
+ * Performs initialisation of MAARs for the current CPU, making use of the
+ * platforms implementation of platform_maar_init where necessary and
+ * duplicating the setup it provides on secondary CPUs.
+ */
+extern void maar_init(void);
+
 /**
  * struct maar_config - MAAR configuration data
  * @lower:	The lowest address that the MAAR pair will affect. Must be

arch/mips/include/asm/mips-cm.h

@@ -194,6 +194,7 @@ BUILD_CM_RW(reg3_mask,		MIPS_CM_GCB_OFS + 0xc8)
 BUILD_CM_R_(gic_status,		MIPS_CM_GCB_OFS + 0xd0)
 BUILD_CM_R_(cpc_status,		MIPS_CM_GCB_OFS + 0xf0)
 BUILD_CM_RW(l2_config,		MIPS_CM_GCB_OFS + 0x130)
+BUILD_CM_RW(sys_config2,	MIPS_CM_GCB_OFS + 0x150)
 
 /* Core Local & Core Other register accessor functions */
 BUILD_CM_Cx_RW(reset_release,	0x00)
@@ -316,6 +317,10 @@ BUILD_CM_Cx_R_(tcid_8_priority,	0x80)
 #define CM_GCR_L2_CONFIG_ASSOC_SHF		0
 #define CM_GCR_L2_CONFIG_ASSOC_MSK		(_ULCAST_(0xff) << 0)
 
+/* GCR_SYS_CONFIG2 register fields */
+#define CM_GCR_SYS_CONFIG2_MAXVPW_SHF		0
+#define CM_GCR_SYS_CONFIG2_MAXVPW_MSK		(_ULCAST_(0xf) << 0)
+
 /* GCR_Cx_COHERENCE register fields */
 #define CM_GCR_Cx_COHERENCE_COHDOMAINEN_SHF	0
 #define CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK	(_ULCAST_(0xff) << 0)
@@ -405,4 +410,38 @@ static inline int mips_cm_revision(void)
 	return read_gcr_rev();
 }
 
+/**
+ * mips_cm_max_vp_width() - return the width in bits of VP indices
+ *
+ * Return: the width, in bits, of VP indices in fields that combine core & VP
+ * indices.
+ */
+static inline unsigned int mips_cm_max_vp_width(void)
+{
+	extern int smp_num_siblings;
+
+	if (mips_cm_revision() >= CM_REV_CM3)
+		return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW_MSK;
+
+	return smp_num_siblings;
+}
+
+/**
+ * mips_cm_vp_id() - calculate the hardware VP ID for a CPU
+ * @cpu: the CPU whose VP ID to calculate
+ *
+ * Hardware such as the GIC uses identifiers for VPs which may not match the
+ * CPU numbers used by Linux. This function calculates the hardware VP
+ * identifier corresponding to a given CPU.
+ *
+ * Return: the VP ID for the CPU.
+ */
+static inline unsigned int mips_cm_vp_id(unsigned int cpu)
+{
+	unsigned int core = cpu_data[cpu].core;
+	unsigned int vp = cpu_vpe_id(&cpu_data[cpu]);
+
+	return (core * mips_cm_max_vp_width()) + vp;
+}
+
 #endif /* __MIPS_ASM_MIPS_CM_H__ */

arch/mips/include/asm/mipsregs.h

@@ -487,6 +487,8 @@
 
 /* Bits specific to the MIPS32/64 PRA.	*/
 #define MIPS_CONF_MT		(_ULCAST_(7) <<	 7)
+#define MIPS_CONF_MT_TLB	(_ULCAST_(1) <<  7)
+#define MIPS_CONF_MT_FTLB	(_ULCAST_(4) <<  7)
 #define MIPS_CONF_AR		(_ULCAST_(7) << 10)
 #define MIPS_CONF_AT		(_ULCAST_(3) << 13)
 #define MIPS_CONF_M		(_ULCAST_(1) << 31)

arch/mips/include/uapi/asm/unistd.h

@@ -377,16 +377,18 @@
 #define __NR_memfd_create		(__NR_Linux + 354)
 #define __NR_bpf			(__NR_Linux + 355)
 #define __NR_execveat			(__NR_Linux + 356)
+#define __NR_userfaultfd		(__NR_Linux + 357)
+#define __NR_membarrier			(__NR_Linux + 358)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		356
+#define __NR_Linux_syscalls		358
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		356
+#define __NR_O32_Linux_syscalls		358
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -711,16 +713,18 @@
 #define __NR_memfd_create		(__NR_Linux + 314)
 #define __NR_bpf			(__NR_Linux + 315)
 #define __NR_execveat			(__NR_Linux + 316)
+#define __NR_userfaultfd		(__NR_Linux + 317)
+#define __NR_membarrier			(__NR_Linux + 318)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		316
+#define __NR_Linux_syscalls		318
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		316
+#define __NR_64_Linux_syscalls		318
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -1049,15 +1053,17 @@
 #define __NR_memfd_create		(__NR_Linux + 318)
 #define __NR_bpf			(__NR_Linux + 319)
 #define __NR_execveat			(__NR_Linux + 320)
+#define __NR_userfaultfd		(__NR_Linux + 321)
+#define __NR_membarrier			(__NR_Linux + 322)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		320
+#define __NR_Linux_syscalls		322
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		320
+#define __NR_N32_Linux_syscalls		322
 
 #endif /* _UAPI_ASM_UNISTD_H */

arch/mips/jz4740/board-qi_lb60.c

@@ -26,6 +26,7 @@
 #include <linux/power/jz4740-battery.h>
 #include <linux/power/gpio-charger.h>
 
+#include <asm/mach-jz4740/gpio.h>
 #include <asm/mach-jz4740/jz4740_fb.h>
 #include <asm/mach-jz4740/jz4740_mmc.h>
 #include <asm/mach-jz4740/jz4740_nand.h>

arch/mips/jz4740/gpio.c

@@ -28,6 +28,7 @@
 #include <linux/seq_file.h>
 
 #include <asm/mach-jz4740/base.h>
+#include <asm/mach-jz4740/gpio.h>
 
 #define JZ4740_GPIO_BASE_A (32*0)
 #define JZ4740_GPIO_BASE_B (32*1)

arch/mips/kernel/cps-vec.S

@@ -39,6 +39,7 @@
 	 mfc0	\dest, CP0_CONFIG, 3
 	andi	\dest, \dest, MIPS_CONF3_MT
 	beqz	\dest, \nomt
+	 nop
 	.endm
 
 .section .text.cps-vec
@@ -223,10 +224,9 @@ LEAF(excep_ejtag)
 	END(excep_ejtag)
 
 LEAF(mips_cps_core_init)
-#ifdef CONFIG_MIPS_MT
+#ifdef CONFIG_MIPS_MT_SMP
 	/* Check that the core implements the MT ASE */
 	has_mt	t0, 3f
-	 nop
 
 	.set	push
 	.set	mips64r2
@@ -310,8 +310,9 @@ LEAF(mips_cps_boot_vpes)
 	PTR_ADDU t0, t0, t1
 
 	/* Calculate this VPEs ID. If the core doesn't support MT use 0 */
+	li	t9, 0
+#ifdef CONFIG_MIPS_MT_SMP
 	has_mt	ta2, 1f
-	 li	t9, 0
 
 	/* Find the number of VPEs present in the core */
 	mfc0	t1, CP0_MVPCONF0
@@ -330,6 +331,7 @@ LEAF(mips_cps_boot_vpes)
 	/* Retrieve the VPE ID from EBase.CPUNum */
 	mfc0	t9, $15, 1
 	and	t9, t9, t1
+#endif
 
 1:	/* Calculate a pointer to this VPEs struct vpe_boot_config */
 	li	t1, VPEBOOTCFG_SIZE
@@ -337,7 +339,7 @@ LEAF(mips_cps_boot_vpes)
 	PTR_L	ta3, COREBOOTCFG_VPECONFIG(t0)
 	PTR_ADDU v0, v0, ta3
 
-#ifdef CONFIG_MIPS_MT
+#ifdef CONFIG_MIPS_MT_SMP
 
 	/* If the core doesn't support MT then return */
 	bnez	ta2, 1f
@@ -451,7 +453,7 @@ LEAF(mips_cps_boot_vpes)
 
 2:	.set	pop
 
-#endif /* CONFIG_MIPS_MT */
+#endif /* CONFIG_MIPS_MT_SMP */
 
 	/* Return */
 	jr	ra

arch/mips/kernel/cpu-probe.c

@@ -410,16 +410,18 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, int enable)
 static inline unsigned int decode_config0(struct cpuinfo_mips *c)
 {
 	unsigned int config0;
-	int isa;
+	int isa, mt;
 
 	config0 = read_c0_config();
 
 	/*
 	 * Look for Standard TLB or Dual VTLB and FTLB
 	 */
-	if ((((config0 & MIPS_CONF_MT) >> 7) == 1) ||
+	mt = config0 & MIPS_CONF_MT;
-	    (((config0 & MIPS_CONF_MT) >> 7) == 4))
+	if (mt == MIPS_CONF_MT_TLB)
 		c->options |= MIPS_CPU_TLB;
+	else if (mt == MIPS_CONF_MT_FTLB)
+		c->options |= MIPS_CPU_TLB | MIPS_CPU_FTLB;
 
 	isa = (config0 & MIPS_CONF_AT) >> 13;
 	switch (isa) {
@@ -559,15 +561,18 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c)
 	if (cpu_has_tlb) {
 		if (((config4 & MIPS_CONF4_IE) >> 29) == 2)
 			c->options |= MIPS_CPU_TLBINV;
+
 		/*
-		 * This is a bit ugly. R6 has dropped that field from
+		 * R6 has dropped the MMUExtDef field from config4.
-		 * config4 and the only valid configuration is VTLB+FTLB so
+		 * On R6 the fields always describe the FTLB, and only if it is
-		 * set a good value for mmuextdef for that case.
+		 * present according to Config.MT.
 		 */
-		if (cpu_has_mips_r6)
+		if (!cpu_has_mips_r6)
+			mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
+		else if (cpu_has_ftlb)
 			mmuextdef = MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT;
 		else
-			mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
+			mmuextdef = 0;
 
 		switch (mmuextdef) {
 		case MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT:

arch/mips/kernel/octeon_switch.S

@@ -18,7 +18,7 @@
 	.set pop
 /*
  * task_struct *resume(task_struct *prev, task_struct *next,
- *		       struct thread_info *next_ti, int usedfpu)
+ *		       struct thread_info *next_ti)
  */
 	.align	7
 	LEAF(resume)
@@ -28,30 +28,6 @@
 	cpu_save_nonscratch a0
 	LONG_S	ra, THREAD_REG31(a0)
 
-	/*
-	 * check if we need to save FPU registers
-	 */
-	.set push
-	.set noreorder
-	beqz	a3, 1f
-	 PTR_L	t3, TASK_THREAD_INFO(a0)
-	.set pop
-
-	/*
-	 * clear saved user stack CU1 bit
-	 */
-	LONG_L	t0, ST_OFF(t3)
-	li	t1, ~ST0_CU1
-	and	t0, t0, t1
-	LONG_S	t0, ST_OFF(t3)
-
-	.set push
-	.set arch=mips64r2
-	fpu_save_double a0 t0 t1		# c0_status passed in t0
-						# clobbers t1
-	.set pop
-1:
-
 #if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
 	/* Check if we need to store CVMSEG state */
 	dmfc0	t0, $11,7	/* CvmMemCtl */

arch/mips/kernel/r2300_switch.S

@@ -30,19 +30,9 @@
  */
 #define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
 
-/*
- * FPU context is saved iff the process has used it's FPU in the current
- * time slice as indicated by TIF_USEDFPU.  In any case, the CU1 bit for user
- * space STATUS register should be 0, so that a process *always* starts its
- * userland with FPU disabled after each context switch.
- *
- * FPU will be enabled as soon as the process accesses FPU again, through
- * do_cpu() trap.
- */
-
 /*
  * task_struct *resume(task_struct *prev, task_struct *next,
- *		       struct thread_info *next_ti, int usedfpu)
+ *		       struct thread_info *next_ti)
  */
 LEAF(resume)
 	mfc0	t1, CP0_STATUS
@@ -50,22 +40,6 @@ LEAF(resume)
 	cpu_save_nonscratch a0
 	sw	ra, THREAD_REG31(a0)
 
-	beqz	a3, 1f
-
-	PTR_L	t3, TASK_THREAD_INFO(a0)
-
-	/*
-	 * clear saved user stack CU1 bit
-	 */
-	lw	t0, ST_OFF(t3)
-	li	t1, ~ST0_CU1
-	and	t0, t0, t1
-	sw	t0, ST_OFF(t3)
-
-	fpu_save_single a0, t0			# clobbers t0
-
-1:
-
 #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
 	PTR_LA	t8, __stack_chk_guard
 	LONG_L	t9, TASK_STACK_CANARY(a1)

arch/mips/kernel/scall32-o32.S

@@ -36,16 +36,8 @@ NESTED(handle_sys, PT_SIZE, sp)
 	lw	t1, PT_EPC(sp)		# skip syscall on return
 
 	subu	v0, v0, __NR_O32_Linux	# check syscall number
-	sltiu	t0, v0, __NR_O32_Linux_syscalls + 1
 	addiu	t1, 4			# skip to next instruction
 	sw	t1, PT_EPC(sp)
-	beqz	t0, illegal_syscall
-
-	sll	t0, v0, 2
-	la	t1, sys_call_table
-	addu	t1, t0
-	lw	t2, (t1)		# syscall routine
-	beqz	t2, illegal_syscall
 
 	sw	a3, PT_R26(sp)		# save a3 for syscall restarting
 
@@ -96,6 +88,16 @@ loads_done:
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	and	t0, t1
 	bnez	t0, syscall_trace_entry # -> yes
+syscall_common:
+	sltiu	t0, v0, __NR_O32_Linux_syscalls + 1
+	beqz	t0, illegal_syscall
+
+	sll	t0, v0, 2
+	la	t1, sys_call_table
+	addu	t1, t0
+	lw	t2, (t1)		# syscall routine
+
+	beqz	t2, illegal_syscall
 
 	jalr	t2			# Do The Real Thing (TM)
 
@@ -116,7 +118,7 @@ o32_syscall_exit:
 
 syscall_trace_entry:
 	SAVE_STATIC
-	move	s0, t2
+	move	s0, v0
 	move	a0, sp
 
 	/*
@@ -129,27 +131,18 @@ syscall_trace_entry:
 
 1:	jal	syscall_trace_enter
 
-	bltz	v0, 2f			# seccomp failed? Skip syscall
+	bltz	v0, 1f			# seccomp failed? Skip syscall
+
+	move	v0, s0			# restore syscall
 
-	move	t0, s0
 	RESTORE_STATIC
 	lw	a0, PT_R4(sp)		# Restore argument registers
 	lw	a1, PT_R5(sp)
 	lw	a2, PT_R6(sp)
 	lw	a3, PT_R7(sp)
-	jalr	t0
+	j	syscall_common
 
-	li	t0, -EMAXERRNO - 1	# error?
+1:	j	syscall_exit
-	sltu	t0, t0, v0
-	sw	t0, PT_R7(sp)		# set error flag
-	beqz	t0, 1f
-
-	lw	t1, PT_R2(sp)		# syscall number
-	negu	v0			# error
-	sw	t1, PT_R0(sp)		# save it for syscall restarting
-1:	sw	v0, PT_R2(sp)		# result
-
-2:	j	syscall_exit
 
 /* ------------------------------------------------------------------------ */
 
@@ -599,3 +592,5 @@ EXPORT(sys_call_table)
 	PTR	sys_memfd_create
 	PTR	sys_bpf				/* 4355 */
 	PTR	sys_execveat
+	PTR	sys_userfaultfd
+	PTR	sys_membarrier

arch/mips/kernel/scall64-64.S

@@ -39,18 +39,11 @@ NESTED(handle_sys64, PT_SIZE, sp)
 	.set	at
 #endif
 
-	dsubu	t0, v0, __NR_64_Linux	# check syscall number
-	sltiu	t0, t0, __NR_64_Linux_syscalls + 1
 #if !defined(CONFIG_MIPS32_O32) && !defined(CONFIG_MIPS32_N32)
 	ld	t1, PT_EPC(sp)		# skip syscall on return
 	daddiu	t1, 4			# skip to next instruction
 	sd	t1, PT_EPC(sp)
 #endif
-	beqz	t0, illegal_syscall
-
-	dsll	t0, v0, 3		# offset into table
-	ld	t2, (sys_call_table - (__NR_64_Linux * 8))(t0)
-					# syscall routine
 
 	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
 
@@ -59,6 +52,17 @@ NESTED(handle_sys64, PT_SIZE, sp)
 	and	t0, t1, t0
 	bnez	t0, syscall_trace_entry
 
+syscall_common:
+	dsubu	t2, v0, __NR_64_Linux
+	sltiu   t0, t2, __NR_64_Linux_syscalls + 1
+	beqz	t0, illegal_syscall
+
+	dsll	t0, t2, 3		# offset into table
+	dla	t2, sys_call_table
+	daddu	t0, t2, t0
+	ld	t2, (t0)		# syscall routine
+	beqz	t2, illegal_syscall
+
 	jalr	t2			# Do The Real Thing (TM)
 
 	li	t0, -EMAXERRNO - 1	# error?
@@ -78,14 +82,14 @@ n64_syscall_exit:
 
 syscall_trace_entry:
 	SAVE_STATIC
-	move	s0, t2
+	move	s0, v0
 	move	a0, sp
 	move	a1, v0
 	jal	syscall_trace_enter
 
-	bltz	v0, 2f			# seccomp failed? Skip syscall
+	bltz	v0, 1f			# seccomp failed? Skip syscall
 
-	move	t0, s0
+	move	v0, s0
 	RESTORE_STATIC
 	ld	a0, PT_R4(sp)		# Restore argument registers
 	ld	a1, PT_R5(sp)
@@ -93,19 +97,9 @@ syscall_trace_entry:
 	ld	a3, PT_R7(sp)
 	ld	a4, PT_R8(sp)
 	ld	a5, PT_R9(sp)
-	jalr	t0
+	j	syscall_common
 
-	li	t0, -EMAXERRNO - 1	# error?
+1:	j	syscall_exit
-	sltu	t0, t0, v0
-	sd	t0, PT_R7(sp)		# set error flag
-	beqz	t0, 1f
-
-	ld	t1, PT_R2(sp)		# syscall number
-	dnegu	v0			# error
-	sd	t1, PT_R0(sp)		# save it for syscall restarting
-1:	sd	v0, PT_R2(sp)		# result
-
-2:	j	syscall_exit
 
 illegal_syscall:
 	/* This also isn't a 64-bit syscall, throw an error.  */
@@ -436,4 +430,6 @@ EXPORT(sys_call_table)
 	PTR	sys_memfd_create
 	PTR	sys_bpf				/* 5315 */
 	PTR	sys_execveat
+	PTR	sys_userfaultfd
+	PTR	sys_membarrier
 	.size	sys_call_table,.-sys_call_table

arch/mips/kernel/scall64-n32.S

@@ -52,6 +52,7 @@ NESTED(handle_sysn32, PT_SIZE, sp)
 	and	t0, t1, t0
 	bnez	t0, n32_syscall_trace_entry
 
+syscall_common:
 	jalr	t2			# Do The Real Thing (TM)
 
 	li	t0, -EMAXERRNO - 1	# error?
@@ -75,9 +76,9 @@ n32_syscall_trace_entry:
 	move	a1, v0
 	jal	syscall_trace_enter
 
-	bltz	v0, 2f			# seccomp failed? Skip syscall
+	bltz	v0, 1f			# seccomp failed? Skip syscall
 
-	move	t0, s0
+	move	t2, s0
 	RESTORE_STATIC
 	ld	a0, PT_R4(sp)		# Restore argument registers
 	ld	a1, PT_R5(sp)
@@ -85,19 +86,9 @@ n32_syscall_trace_entry:
 	ld	a3, PT_R7(sp)
 	ld	a4, PT_R8(sp)
 	ld	a5, PT_R9(sp)
-	jalr	t0
+	j	syscall_common
 
-	li	t0, -EMAXERRNO - 1	# error?
+1:	j	syscall_exit
-	sltu	t0, t0, v0
-	sd	t0, PT_R7(sp)		# set error flag
-	beqz	t0, 1f
-
-	ld	t1, PT_R2(sp)		# syscall number
-	dnegu	v0			# error
-	sd	t1, PT_R0(sp)		# save it for syscall restarting
-1:	sd	v0, PT_R2(sp)		# result
-
-2:	j	syscall_exit
 
 not_n32_scall:
 	/* This is not an n32 compatibility syscall, pass it on to
@@ -429,4 +420,6 @@ EXPORT(sysn32_call_table)
 	PTR	sys_memfd_create
 	PTR	sys_bpf
 	PTR	compat_sys_execveat		/* 6320 */
+	PTR	sys_userfaultfd
+	PTR	sys_membarrier
 	.size	sysn32_call_table,.-sysn32_call_table

arch/mips/kernel/scall64-o32.S

@@ -87,6 +87,7 @@ loads_done:
 	and	t0, t1, t0
 	bnez	t0, trace_a_syscall
 
+syscall_common:
 	jalr	t2			# Do The Real Thing (TM)
 
 	li	t0, -EMAXERRNO - 1	# error?
@@ -130,9 +131,9 @@ trace_a_syscall:
 
 1:	jal	syscall_trace_enter
 
-	bltz	v0, 2f			# seccomp failed? Skip syscall
+	bltz	v0, 1f			# seccomp failed? Skip syscall
 
-	move	t0, s0
+	move	t2, s0
 	RESTORE_STATIC
 	ld	a0, PT_R4(sp)		# Restore argument registers
 	ld	a1, PT_R5(sp)
@@ -142,19 +143,9 @@ trace_a_syscall:
 	ld	a5, PT_R9(sp)
 	ld	a6, PT_R10(sp)
 	ld	a7, PT_R11(sp)		# For indirect syscalls
-	jalr	t0
+	j	syscall_common
 
-	li	t0, -EMAXERRNO - 1	# error?
+1:	j	syscall_exit
-	sltu	t0, t0, v0
-	sd	t0, PT_R7(sp)		# set error flag
-	beqz	t0, 1f
-
-	ld	t1, PT_R2(sp)		# syscall number
-	dnegu	v0			# error
-	sd	t1, PT_R0(sp)		# save it for syscall restarting
-1:	sd	v0, PT_R2(sp)		# result
-
-2:	j	syscall_exit
 
 /* ------------------------------------------------------------------------ */
 
@@ -584,4 +575,6 @@ EXPORT(sys32_call_table)
 	PTR	sys_memfd_create
 	PTR	sys_bpf				/* 4355 */
 	PTR	compat_sys_execveat
+	PTR	sys_userfaultfd
+	PTR	sys_membarrier
 	.size	sys32_call_table,.-sys32_call_table

arch/mips/kernel/setup.c

@@ -338,7 +338,7 @@ static void __init bootmem_init(void)
 		if (end <= reserved_end)
 			continue;
 #ifdef CONFIG_BLK_DEV_INITRD
-		/* mapstart should be after initrd_end */
+		/* Skip zones before initrd and initrd itself */
 		if (initrd_end && end <= (unsigned long)PFN_UP(__pa(initrd_end)))
 			continue;
 #endif
@@ -371,6 +371,14 @@ static void __init bootmem_init(void)
 		max_low_pfn = PFN_DOWN(HIGHMEM_START);
 	}
 
+#ifdef CONFIG_BLK_DEV_INITRD
+	/*
+	 * mapstart should be after initrd_end
+	 */
+	if (initrd_end)
+		mapstart = max(mapstart, (unsigned long)PFN_UP(__pa(initrd_end)));
+#endif
+
 	/*
 	 * Initialize the boot-time allocator with low memory only.
 	 */

arch/mips/kernel/smp.c

@@ -42,6 +42,7 @@
 #include <asm/mmu_context.h>
 #include <asm/time.h>
 #include <asm/setup.h>
+#include <asm/maar.h>
 
 cpumask_t cpu_callin_map;		/* Bitmask of started secondaries */
 
@@ -157,6 +158,7 @@ asmlinkage void start_secondary(void)
 	mips_clockevent_init();
 	mp_ops->init_secondary();
 	cpu_report();
+	maar_init();
 
 	/*
 	 * XXX parity protection should be folded in here when it's converted

arch/mips/loongson64/common/env.c

@@ -64,6 +64,9 @@ void __init prom_init_env(void)
 	}
 	if (memsize == 0)
 		memsize = 256;
+
+	loongson_sysconf.nr_uarts = 1;
+
 	pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize);
 #else
 	struct boot_params *boot_p;

arch/mips/mm/dma-default.c

@@ -100,7 +100,7 @@ static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
 	else
 #endif
 #if defined(CONFIG_ZONE_DMA) && !defined(CONFIG_ZONE_DMA32)
-	     if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
+	     if (dev->coherent_dma_mask < DMA_BIT_MASK(sizeof(phys_addr_t) * 8))
 		dma_flag = __GFP_DMA;
 	else
 #endif

arch/mips/mm/init.c

@@ -44,6 +44,7 @@
 #include <asm/pgalloc.h>
 #include <asm/tlb.h>
 #include <asm/fixmap.h>
+#include <asm/maar.h>
 
 /*
  * We have up to 8 empty zeroed pages so we can map one of the right colour
@@ -252,6 +253,119 @@ void __init fixrange_init(unsigned long start, unsigned long end,
 #endif
 }
 
+unsigned __weak platform_maar_init(unsigned num_pairs)
+{
+	struct maar_config cfg[BOOT_MEM_MAP_MAX];
+	unsigned i, num_configured, num_cfg = 0;
+	phys_addr_t skip;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		switch (boot_mem_map.map[i].type) {
+		case BOOT_MEM_RAM:
+		case BOOT_MEM_INIT_RAM:
+			break;
+		default:
+			continue;
+		}
+
+		skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
+
+		cfg[num_cfg].lower = boot_mem_map.map[i].addr;
+		cfg[num_cfg].lower += skip;
+
+		cfg[num_cfg].upper = cfg[num_cfg].lower;
+		cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
+		cfg[num_cfg].upper -= skip;
+
+		cfg[num_cfg].attrs = MIPS_MAAR_S;
+		num_cfg++;
+	}
+
+	num_configured = maar_config(cfg, num_cfg, num_pairs);
+	if (num_configured < num_cfg)
+		pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
+			num_pairs, num_cfg);
+
+	return num_configured;
+}
+
+void maar_init(void)
+{
+	unsigned num_maars, used, i;
+	phys_addr_t lower, upper, attr;
+	static struct {
+		struct maar_config cfgs[3];
+		unsigned used;
+	} recorded = { { { 0 } }, 0 };
+
+	if (!cpu_has_maar)
+		return;
+
+	/* Detect the number of MAARs */
+	write_c0_maari(~0);
+	back_to_back_c0_hazard();
+	num_maars = read_c0_maari() + 1;
+
+	/* MAARs should be in pairs */
+	WARN_ON(num_maars % 2);
+
+	/* Set MAARs using values we recorded already */
+	if (recorded.used) {
+		used = maar_config(recorded.cfgs, recorded.used, num_maars / 2);
+		BUG_ON(used != recorded.used);
+	} else {
+		/* Configure the required MAARs */
+		used = platform_maar_init(num_maars / 2);
+	}
+
+	/* Disable any further MAARs */
+	for (i = (used * 2); i < num_maars; i++) {
+		write_c0_maari(i);
+		back_to_back_c0_hazard();
+		write_c0_maar(0);
+		back_to_back_c0_hazard();
+	}
+
+	if (recorded.used)
+		return;
+
+	pr_info("MAAR configuration:\n");
+	for (i = 0; i < num_maars; i += 2) {
+		write_c0_maari(i);
+		back_to_back_c0_hazard();
+		upper = read_c0_maar();
+
+		write_c0_maari(i + 1);
+		back_to_back_c0_hazard();
+		lower = read_c0_maar();
+
+		attr = lower & upper;
+		lower = (lower & MIPS_MAAR_ADDR) << 4;
+		upper = ((upper & MIPS_MAAR_ADDR) << 4) | 0xffff;
+
+		pr_info("  [%d]: ", i / 2);
+		if (!(attr & MIPS_MAAR_V)) {
+			pr_cont("disabled\n");
+			continue;
+		}
+
+		pr_cont("%pa-%pa", &lower, &upper);
+
+		if (attr & MIPS_MAAR_S)
+			pr_cont(" speculate");
+
+		pr_cont("\n");
+
+		/* Record the setup for use on secondary CPUs */
+		if (used <= ARRAY_SIZE(recorded.cfgs)) {
+			recorded.cfgs[recorded.used].lower = lower;
+			recorded.cfgs[recorded.used].upper = upper;
+			recorded.cfgs[recorded.used].attrs = attr;
+			recorded.used++;
+		}
+	}
+}
+
 #ifndef CONFIG_NEED_MULTIPLE_NODES
 int page_is_ram(unsigned long pagenr)
 {
@@ -334,69 +448,6 @@ static inline void mem_init_free_highmem(void)
 #endif
 }
 
-unsigned __weak platform_maar_init(unsigned num_pairs)
-{
-	struct maar_config cfg[BOOT_MEM_MAP_MAX];
-	unsigned i, num_configured, num_cfg = 0;
-	phys_addr_t skip;
-
-	for (i = 0; i < boot_mem_map.nr_map; i++) {
-		switch (boot_mem_map.map[i].type) {
-		case BOOT_MEM_RAM:
-		case BOOT_MEM_INIT_RAM:
-			break;
-		default:
-			continue;
-		}
-
-		skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
-
-		cfg[num_cfg].lower = boot_mem_map.map[i].addr;
-		cfg[num_cfg].lower += skip;
-
-		cfg[num_cfg].upper = cfg[num_cfg].lower;
-		cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
-		cfg[num_cfg].upper -= skip;
-
-		cfg[num_cfg].attrs = MIPS_MAAR_S;
-		num_cfg++;
-	}
-
-	num_configured = maar_config(cfg, num_cfg, num_pairs);
-	if (num_configured < num_cfg)
-		pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
-			num_pairs, num_cfg);
-
-	return num_configured;
-}
-
-static void maar_init(void)
-{
-	unsigned num_maars, used, i;
-
-	if (!cpu_has_maar)
-		return;
-
-	/* Detect the number of MAARs */
-	write_c0_maari(~0);
-	back_to_back_c0_hazard();
-	num_maars = read_c0_maari() + 1;
-
-	/* MAARs should be in pairs */
-	WARN_ON(num_maars % 2);
-
-	/* Configure the required MAARs */
-	used = platform_maar_init(num_maars / 2);
-
-	/* Disable any further MAARs */
-	for (i = (used * 2); i < num_maars; i++) {
-		write_c0_maari(i);
-		back_to_back_c0_hazard();
-		write_c0_maar(0);
-		back_to_back_c0_hazard();
-	}
-}
-
 void __init mem_init(void)
 {
 #ifdef CONFIG_HIGHMEM

arch/mips/net/bpf_jit_asm.S

@@ -57,15 +57,28 @@
 
 LEAF(sk_load_word)
 	is_offset_negative(word)
-	.globl sk_load_word_positive
+FEXPORT(sk_load_word_positive)
-sk_load_word_positive:
 	is_offset_in_header(4, word)
 	/* Offset within header boundaries */
 	PTR_ADDU t1, $r_skb_data, offset
+	.set	reorder
 	lw	$r_A, 0(t1)
+	.set	noreorder
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
 	wsbh	t0, $r_A
 	rotr	$r_A, t0, 16
+# else
+	sll	t0, $r_A, 24
+	srl	t1, $r_A, 24
+	srl	t2, $r_A, 8
+	or	t0, t0, t1
+	andi	t2, t2, 0xff00
+	andi	t1, $r_A, 0xff00
+	or	t0, t0, t2
+	sll	t1, t1, 8
+	or	$r_A, t0, t1
+# endif
 #endif
 	jr	$r_ra
 	 move	$r_ret, zero
@@ -73,15 +86,24 @@ sk_load_word_positive:
 
 LEAF(sk_load_half)
 	is_offset_negative(half)
-	.globl sk_load_half_positive
+FEXPORT(sk_load_half_positive)
-sk_load_half_positive:
 	is_offset_in_header(2, half)
 	/* Offset within header boundaries */
 	PTR_ADDU t1, $r_skb_data, offset
+	.set	reorder
 	lh	$r_A, 0(t1)
+	.set	noreorder
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
 	wsbh	t0, $r_A
 	seh	$r_A, t0
+# else
+	sll	t0, $r_A, 24
+	andi	t1, $r_A, 0xff00
+	sra	t0, t0, 16
+	srl	t1, t1, 8
+	or	$r_A, t0, t1
+# endif
 #endif
 	jr	$r_ra
 	 move	$r_ret, zero
@@ -89,8 +111,7 @@ sk_load_half_positive:
 
 LEAF(sk_load_byte)
 	is_offset_negative(byte)
-	.globl sk_load_byte_positive
+FEXPORT(sk_load_byte_positive)
-sk_load_byte_positive:
 	is_offset_in_header(1, byte)
 	/* Offset within header boundaries */
 	PTR_ADDU t1, $r_skb_data, offset
@@ -148,23 +169,47 @@ sk_load_byte_positive:
 NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
 	bpf_slow_path_common(4)
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
 	wsbh	t0, $r_s0
 	jr	$r_ra
 	 rotr	$r_A, t0, 16
-#endif
+# else
+	sll	t0, $r_s0, 24
+	srl	t1, $r_s0, 24
+	srl	t2, $r_s0, 8
+	or	t0, t0, t1
+	andi	t2, t2, 0xff00
+	andi	t1, $r_s0, 0xff00
+	or	t0, t0, t2
+	sll	t1, t1, 8
 	jr	$r_ra
-	move	$r_A, $r_s0
+	 or	$r_A, t0, t1
+# endif
+#else
+	jr	$r_ra
+	 move	$r_A, $r_s0
+#endif
 
 	END(bpf_slow_path_word)
 
 NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp)
 	bpf_slow_path_common(2)
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
 	jr	$r_ra
 	 wsbh	$r_A, $r_s0
-#endif
+# else
+	sll	t0, $r_s0, 8
+	andi	t1, $r_s0, 0xff00
+	andi	t0, t0, 0xff00
+	srl	t1, t1, 8
+	jr	$r_ra
+	 or	$r_A, t0, t1
+# endif
+#else
 	jr	$r_ra
 	 move	$r_A, $r_s0
+#endif
 
 	END(bpf_slow_path_half)
 

arch/mn10300/include/asm/Kbuild

@@ -9,3 +9,4 @@ generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += sections.h
 generic-y += trace_clock.h
+generic-y += word-at-a-time.h

arch/nios2/include/asm/Kbuild

@@ -61,4 +61,5 @@ generic-y += types.h
 generic-y += unaligned.h
 generic-y += user.h
 generic-y += vga.h
+generic-y += word-at-a-time.h
 generic-y += xor.h

arch/powerpc/include/asm/Kbuild

@@ -7,3 +7,4 @@ generic-y += mcs_spinlock.h
 generic-y += preempt.h
 generic-y += rwsem.h
 generic-y += vtime.h
+generic-y += word-at-a-time.h

arch/s390/include/asm/Kbuild

@@ -6,3 +6,4 @@ generic-y += mcs_spinlock.h
 generic-y += mm-arch-hooks.h
 generic-y += preempt.h
 generic-y += trace_clock.h
+generic-y += word-at-a-time.h

arch/score/include/asm/Kbuild

@@ -13,3 +13,4 @@ generic-y += sections.h
 generic-y += trace_clock.h
 generic-y += xor.h
 generic-y += serial.h
+generic-y += word-at-a-time.h

arch/tile/gxio/mpipe.c

@@ -19,6 +19,7 @@
 #include <linux/errno.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/string.h>
 
 #include <gxio/iorpc_globals.h>
 #include <gxio/iorpc_mpipe.h>
@@ -29,32 +30,6 @@
 /* HACK: Avoid pointless "shadow" warnings. */
 #define link link_shadow
 
-/**
- * strscpy - Copy a C-string into a sized buffer, but only if it fits
- * @dest: Where to copy the string to
- * @src: Where to copy the string from
- * @size: size of destination buffer
- *
- * Use this routine to avoid copying too-long strings.
- * The routine returns the total number of bytes copied
- * (including the trailing NUL) or zero if the buffer wasn't
- * big enough.  To ensure that programmers pay attention
- * to the return code, the destination has a single NUL
- * written at the front (if size is non-zero) when the
- * buffer is not big enough.
- */
-static size_t strscpy(char *dest, const char *src, size_t size)
-{
-	size_t len = strnlen(src, size) + 1;
-	if (len > size) {
-		if (size)
-			dest[0] = '\0';
-		return 0;
-	}
-	memcpy(dest, src, len);
-	return len;
-}
-
 int gxio_mpipe_init(gxio_mpipe_context_t *context, unsigned int mpipe_index)
 {
 	char file[32];
@@ -540,7 +515,7 @@ int gxio_mpipe_link_instance(const char *link_name)
 	if (!context)
 		return GXIO_ERR_NO_DEVICE;
 
-	if (strscpy(name.name, link_name, sizeof(name.name)) == 0)
+	if (strscpy(name.name, link_name, sizeof(name.name)) < 0)
 		return GXIO_ERR_NO_DEVICE;
 
 	return gxio_mpipe_info_instance_aux(context, name);
@@ -559,7 +534,7 @@ int gxio_mpipe_link_enumerate_mac(int idx, char *link_name, uint8_t *link_mac)
 
 	rv = gxio_mpipe_info_enumerate_aux(context, idx, &name, &mac);
 	if (rv >= 0) {
-		if (strscpy(link_name, name.name, sizeof(name.name)) == 0)
+		if (strscpy(link_name, name.name, sizeof(name.name)) < 0)
 			return GXIO_ERR_INVAL_MEMORY_SIZE;
 		memcpy(link_mac, mac.mac, sizeof(mac.mac));
 	}
@@ -576,7 +551,7 @@ int gxio_mpipe_link_open(gxio_mpipe_link_t *link,
 	_gxio_mpipe_link_name_t name;
 	int rv;
 
-	if (strscpy(name.name, link_name, sizeof(name.name)) == 0)
+	if (strscpy(name.name, link_name, sizeof(name.name)) < 0)
 		return GXIO_ERR_NO_DEVICE;
 
 	rv = gxio_mpipe_link_open_aux(context, name, flags);

arch/tile/include/asm/Kbuild

@@ -40,4 +40,5 @@ generic-y += termbits.h
 generic-y += termios.h
 generic-y += trace_clock.h
 generic-y += types.h
+generic-y += word-at-a-time.h
 generic-y += xor.h

arch/tile/kernel/usb.c

@@ -22,6 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/usb/tilegx.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/types.h>
 
 static u64 ehci_dmamask = DMA_BIT_MASK(32);

arch/um/include/asm/Kbuild

@@ -25,4 +25,5 @@ generic-y += preempt.h
 generic-y += switch_to.h
 generic-y += topology.h
 generic-y += trace_clock.h
+generic-y += word-at-a-time.h
 generic-y += xor.h

arch/unicore32/include/asm/Kbuild

@@ -62,4 +62,5 @@ generic-y += ucontext.h
 generic-y += unaligned.h
 generic-y += user.h
 generic-y += vga.h
+generic-y += word-at-a-time.h
 generic-y += xor.h

arch/x86/include/asm/cpufeature.h

@@ -193,7 +193,7 @@
 #define X86_FEATURE_HW_PSTATE	( 7*32+ 8) /* AMD HW-PState */
 #define X86_FEATURE_PROC_FEEDBACK ( 7*32+ 9) /* AMD ProcFeedbackInterface */
 #define X86_FEATURE_HWP		( 7*32+ 10) /* "hwp" Intel HWP */
-#define X86_FEATURE_HWP_NOITFY	( 7*32+ 11) /* Intel HWP_NOTIFY */
+#define X86_FEATURE_HWP_NOTIFY	( 7*32+ 11) /* Intel HWP_NOTIFY */
 #define X86_FEATURE_HWP_ACT_WINDOW ( 7*32+ 12) /* Intel HWP_ACT_WINDOW */
 #define X86_FEATURE_HWP_EPP	( 7*32+13) /* Intel HWP_EPP */
 #define X86_FEATURE_HWP_PKG_REQ ( 7*32+14) /* Intel HWP_PKG_REQ */

arch/x86/include/asm/efi.h

@@ -86,6 +86,7 @@ extern u64 asmlinkage efi_call(void *fp, ...);
 extern void __iomem *__init efi_ioremap(unsigned long addr, unsigned long size,
 					u32 type, u64 attribute);
 
+#ifdef CONFIG_KASAN
 /*
  * CONFIG_KASAN may redefine memset to __memset.  __memset function is present
  * only in kernel binary.  Since the EFI stub linked into a separate binary it
@@ -95,6 +96,7 @@ extern void __iomem *__init efi_ioremap(unsigned long addr, unsigned long size,
 #undef memcpy
 #undef memset
 #undef memmove
+#endif
 
 #endif /* CONFIG_X86_32 */
 

arch/x86/include/asm/msr-index.h

@@ -141,6 +141,8 @@
 #define DEBUGCTLMSR_BTS_OFF_USR		(1UL << 10)
 #define DEBUGCTLMSR_FREEZE_LBRS_ON_PMI	(1UL << 11)
 
+#define MSR_PEBS_FRONTEND		0x000003f7
+
 #define MSR_IA32_POWER_CTL		0x000001fc
 
 #define MSR_IA32_MC0_CTL		0x00000400

arch/x86/include/asm/pvclock-abi.h

@@ -41,6 +41,7 @@ struct pvclock_wall_clock {
 
 #define PVCLOCK_TSC_STABLE_BIT	(1 << 0)
 #define PVCLOCK_GUEST_STOPPED	(1 << 1)
+/* PVCLOCK_COUNTS_FROM_ZERO broke ABI and can't be used anymore. */
 #define PVCLOCK_COUNTS_FROM_ZERO (1 << 2)
 #endif /* __ASSEMBLY__ */
 #endif /* _ASM_X86_PVCLOCK_ABI_H */

arch/x86/include/uapi/asm/bitsperlong.h

@@ -1,7 +1,7 @@
 #ifndef __ASM_X86_BITSPERLONG_H
 #define __ASM_X86_BITSPERLONG_H
 
-#ifdef __x86_64__
+#if defined(__x86_64__) && !defined(__ILP32__)
 # define __BITS_PER_LONG 64
 #else
 # define __BITS_PER_LONG 32

arch/x86/kernel/cpu/mshyperv.c

@@ -34,11 +34,10 @@
 struct ms_hyperv_info ms_hyperv;
 EXPORT_SYMBOL_GPL(ms_hyperv);
 
-static void (*hv_kexec_handler)(void);
-static void (*hv_crash_handler)(struct pt_regs *regs);
-
 #if IS_ENABLED(CONFIG_HYPERV)
 static void (*vmbus_handler)(void);
+static void (*hv_kexec_handler)(void);
+static void (*hv_crash_handler)(struct pt_regs *regs);
 
 void hyperv_vector_handler(struct pt_regs *regs)
 {
@@ -96,8 +95,8 @@ void hv_remove_crash_handler(void)
 	hv_crash_handler = NULL;
 }
 EXPORT_SYMBOL_GPL(hv_remove_crash_handler);
-#endif
 
+#ifdef CONFIG_KEXEC_CORE
 static void hv_machine_shutdown(void)
 {
 	if (kexec_in_progress && hv_kexec_handler)
@@ -111,7 +110,8 @@ static void hv_machine_crash_shutdown(struct pt_regs *regs)
 		hv_crash_handler(regs);
 	native_machine_crash_shutdown(regs);
 }
-
+#endif /* CONFIG_KEXEC_CORE */
+#endif /* CONFIG_HYPERV */
 
 static uint32_t  __init ms_hyperv_platform(void)
 {
@@ -186,8 +186,10 @@ static void __init ms_hyperv_init_platform(void)
 	no_timer_check = 1;
 #endif
 
+#if IS_ENABLED(CONFIG_HYPERV) && defined(CONFIG_KEXEC_CORE)
 	machine_ops.shutdown = hv_machine_shutdown;
 	machine_ops.crash_shutdown = hv_machine_crash_shutdown;
+#endif
 	mark_tsc_unstable("running on Hyper-V");
 }
 

arch/x86/kernel/cpu/perf_event.h

@@ -47,6 +47,7 @@ enum extra_reg_type {
 	EXTRA_REG_RSP_1 = 1,	/* offcore_response_1 */
 	EXTRA_REG_LBR   = 2,	/* lbr_select */
 	EXTRA_REG_LDLAT = 3,	/* ld_lat_threshold */
+	EXTRA_REG_FE    = 4,    /* fe_* */
 
 	EXTRA_REG_MAX		/* number of entries needed */
 };

arch/x86/kernel/cpu/perf_event_intel.c

@@ -205,6 +205,11 @@ static struct extra_reg intel_skl_extra_regs[] __read_mostly = {
 	INTEL_UEVENT_EXTRA_REG(0x01b7, MSR_OFFCORE_RSP_0, 0x3fffff8fffull, RSP_0),
 	INTEL_UEVENT_EXTRA_REG(0x01bb, MSR_OFFCORE_RSP_1, 0x3fffff8fffull, RSP_1),
 	INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd),
+	/*
+	 * Note the low 8 bits eventsel code is not a continuous field, containing
+	 * some #GPing bits. These are masked out.
+	 */
+	INTEL_UEVENT_EXTRA_REG(0x01c6, MSR_PEBS_FRONTEND, 0x7fff17, FE),
 	EVENT_EXTRA_END
 };
 
@@ -250,7 +255,7 @@ struct event_constraint intel_bdw_event_constraints[] = {
 	FIXED_EVENT_CONSTRAINT(0x003c, 1),	/* CPU_CLK_UNHALTED.CORE */
 	FIXED_EVENT_CONSTRAINT(0x0300, 2),	/* CPU_CLK_UNHALTED.REF */
 	INTEL_UEVENT_CONSTRAINT(0x148, 0x4),	/* L1D_PEND_MISS.PENDING */
-	INTEL_EVENT_CONSTRAINT(0xa3, 0x4),	/* CYCLE_ACTIVITY.* */
+	INTEL_UEVENT_CONSTRAINT(0x8a3, 0x4),	/* CYCLE_ACTIVITY.CYCLES_L1D_MISS */
 	EVENT_CONSTRAINT_END
 };
 
@@ -2891,6 +2896,8 @@ PMU_FORMAT_ATTR(offcore_rsp, "config1:0-63");
 
 PMU_FORMAT_ATTR(ldlat, "config1:0-15");
 
+PMU_FORMAT_ATTR(frontend, "config1:0-23");
+
 static struct attribute *intel_arch3_formats_attr[] = {
 	&format_attr_event.attr,
 	&format_attr_umask.attr,
@@ -2907,6 +2914,11 @@ static struct attribute *intel_arch3_formats_attr[] = {
 	NULL,
 };
 
+static struct attribute *skl_format_attr[] = {
+	&format_attr_frontend.attr,
+	NULL,
+};
+
 static __initconst const struct x86_pmu core_pmu = {
 	.name			= "core",
 	.handle_irq		= x86_pmu_handle_irq,
@@ -3516,7 +3528,8 @@ __init int intel_pmu_init(void)
 
 		x86_pmu.hw_config = hsw_hw_config;
 		x86_pmu.get_event_constraints = hsw_get_event_constraints;
-		x86_pmu.cpu_events = hsw_events_attrs;
+		x86_pmu.format_attrs = merge_attr(intel_arch3_formats_attr,
+						  skl_format_attr);
 		WARN_ON(!x86_pmu.format_attrs);
 		x86_pmu.cpu_events = hsw_events_attrs;
 		pr_cont("Skylake events, ");

arch/x86/kernel/cpu/perf_event_msr.c

@@ -10,12 +10,12 @@ enum perf_msr_id {
 	PERF_MSR_EVENT_MAX,
 };
 
-bool test_aperfmperf(int idx)
+static bool test_aperfmperf(int idx)
 {
 	return boot_cpu_has(X86_FEATURE_APERFMPERF);
 }
 
-bool test_intel(int idx)
+static bool test_intel(int idx)
 {
 	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
 	    boot_cpu_data.x86 != 6)

arch/x86/kernel/cpu/scattered.c

@@ -37,7 +37,7 @@ void init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 		{ X86_FEATURE_PLN,		CR_EAX, 4, 0x00000006, 0 },
 		{ X86_FEATURE_PTS,		CR_EAX, 6, 0x00000006, 0 },
 		{ X86_FEATURE_HWP,		CR_EAX, 7, 0x00000006, 0 },
-		{ X86_FEATURE_HWP_NOITFY,	CR_EAX, 8, 0x00000006, 0 },
+		{ X86_FEATURE_HWP_NOTIFY,	CR_EAX, 8, 0x00000006, 0 },
 		{ X86_FEATURE_HWP_ACT_WINDOW,	CR_EAX, 9, 0x00000006, 0 },
 		{ X86_FEATURE_HWP_EPP,		CR_EAX,10, 0x00000006, 0 },
 		{ X86_FEATURE_HWP_PKG_REQ,	CR_EAX,11, 0x00000006, 0 },

arch/x86/kernel/crash.c

@@ -185,10 +185,9 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
 }
 
 #ifdef CONFIG_KEXEC_FILE
-static int get_nr_ram_ranges_callback(unsigned long start_pfn,
+static int get_nr_ram_ranges_callback(u64 start, u64 end, void *arg)
-				unsigned long nr_pfn, void *arg)
 {
-	int *nr_ranges = arg;
+	unsigned int *nr_ranges = arg;
 
 	(*nr_ranges)++;
 	return 0;
@@ -214,7 +213,7 @@ static void fill_up_crash_elf_data(struct crash_elf_data *ced,
 
 	ced->image = image;
 
-	walk_system_ram_range(0, -1, &nr_ranges,
+	walk_system_ram_res(0, -1, &nr_ranges,
 				get_nr_ram_ranges_callback);
 
 	ced->max_nr_ranges = nr_ranges;

arch/x86/kernel/process.c

@@ -506,3 +506,58 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
 	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
 }
 
+/*
+ * Called from fs/proc with a reference on @p to find the function
+ * which called into schedule(). This needs to be done carefully
+ * because the task might wake up and we might look at a stack
+ * changing under us.
+ */
+unsigned long get_wchan(struct task_struct *p)
+{
+	unsigned long start, bottom, top, sp, fp, ip;
+	int count = 0;
+
+	if (!p || p == current || p->state == TASK_RUNNING)
+		return 0;
+
+	start = (unsigned long)task_stack_page(p);
+	if (!start)
+		return 0;
+
+	/*
+	 * Layout of the stack page:
+	 *
+	 * ----------- topmax = start + THREAD_SIZE - sizeof(unsigned long)
+	 * PADDING
+	 * ----------- top = topmax - TOP_OF_KERNEL_STACK_PADDING
+	 * stack
+	 * ----------- bottom = start + sizeof(thread_info)
+	 * thread_info
+	 * ----------- start
+	 *
+	 * The tasks stack pointer points at the location where the
+	 * framepointer is stored. The data on the stack is:
+	 * ... IP FP ... IP FP
+	 *
+	 * We need to read FP and IP, so we need to adjust the upper
+	 * bound by another unsigned long.
+	 */
+	top = start + THREAD_SIZE - TOP_OF_KERNEL_STACK_PADDING;
+	top -= 2 * sizeof(unsigned long);
+	bottom = start + sizeof(struct thread_info);
+
+	sp = READ_ONCE(p->thread.sp);
+	if (sp < bottom || sp > top)
+		return 0;
+
+	fp = READ_ONCE(*(unsigned long *)sp);
+	do {
+		if (fp < bottom || fp > top)
+			return 0;
+		ip = READ_ONCE(*(unsigned long *)(fp + sizeof(unsigned long)));
+		if (!in_sched_functions(ip))
+			return ip;
+		fp = READ_ONCE(*(unsigned long *)fp);
+	} while (count++ < 16 && p->state != TASK_RUNNING);
+	return 0;
+}

arch/x86/kernel/process_32.c

@@ -324,31 +324,3 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	return prev_p;
 }
-
-#define top_esp                (THREAD_SIZE - sizeof(unsigned long))
-#define top_ebp                (THREAD_SIZE - 2*sizeof(unsigned long))
-
-unsigned long get_wchan(struct task_struct *p)
-{
-	unsigned long bp, sp, ip;
-	unsigned long stack_page;
-	int count = 0;
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-	stack_page = (unsigned long)task_stack_page(p);
-	sp = p->thread.sp;
-	if (!stack_page || sp < stack_page || sp > top_esp+stack_page)
-		return 0;
-	/* include/asm-i386/system.h:switch_to() pushes bp last. */
-	bp = *(unsigned long *) sp;
-	do {
-		if (bp < stack_page || bp > top_ebp+stack_page)
-			return 0;
-		ip = *(unsigned long *) (bp+4);
-		if (!in_sched_functions(ip))
-			return ip;
-		bp = *(unsigned long *) bp;
-	} while (count++ < 16);
-	return 0;
-}
-

arch/x86/kernel/process_64.c

@@ -499,30 +499,6 @@ void set_personality_ia32(bool x32)
 }
 EXPORT_SYMBOL_GPL(set_personality_ia32);
 
-unsigned long get_wchan(struct task_struct *p)
-{
-	unsigned long stack;
-	u64 fp, ip;
-	int count = 0;
-
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-	stack = (unsigned long)task_stack_page(p);
-	if (p->thread.sp < stack || p->thread.sp >= stack+THREAD_SIZE)
-		return 0;
-	fp = *(u64 *)(p->thread.sp);
-	do {
-		if (fp < (unsigned long)stack ||
-		    fp >= (unsigned long)stack+THREAD_SIZE)
-			return 0;
-		ip = *(u64 *)(fp+8);
-		if (!in_sched_functions(ip))
-			return ip;
-		fp = *(u64 *)fp;
-	} while (count++ < 16);
-	return 0;
-}
-
 long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
 {
 	int ret = 0;

arch/x86/kvm/svm.c

@@ -514,7 +514,7 @@ static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
 	struct vcpu_svm *svm = to_svm(vcpu);
 
 	if (svm->vmcb->control.next_rip != 0) {
-		WARN_ON(!static_cpu_has(X86_FEATURE_NRIPS));
+		WARN_ON_ONCE(!static_cpu_has(X86_FEATURE_NRIPS));
 		svm->next_rip = svm->vmcb->control.next_rip;
 	}
 
@@ -866,64 +866,6 @@ static void svm_disable_lbrv(struct vcpu_svm *svm)
 	set_msr_interception(msrpm, MSR_IA32_LASTINTTOIP, 0, 0);
 }
 
-#define MTRR_TYPE_UC_MINUS	7
-#define MTRR2PROTVAL_INVALID 0xff
-
-static u8 mtrr2protval[8];
-
-static u8 fallback_mtrr_type(int mtrr)
-{
-	/*
-	 * WT and WP aren't always available in the host PAT.  Treat
-	 * them as UC and UC- respectively.  Everything else should be
-	 * there.
-	 */
-	switch (mtrr)
-	{
-	case MTRR_TYPE_WRTHROUGH:
-		return MTRR_TYPE_UNCACHABLE;
-	case MTRR_TYPE_WRPROT:
-		return MTRR_TYPE_UC_MINUS;
-	default:
-		BUG();
-	}
-}
-
-static void build_mtrr2protval(void)
-{
-	int i;
-	u64 pat;
-
-	for (i = 0; i < 8; i++)
-		mtrr2protval[i] = MTRR2PROTVAL_INVALID;
-
-	/* Ignore the invalid MTRR types.  */
-	mtrr2protval[2] = 0;
-	mtrr2protval[3] = 0;
-
-	/*
-	 * Use host PAT value to figure out the mapping from guest MTRR
-	 * values to nested page table PAT/PCD/PWT values.  We do not
-	 * want to change the host PAT value every time we enter the
-	 * guest.
-	 */
-	rdmsrl(MSR_IA32_CR_PAT, pat);
-	for (i = 0; i < 8; i++) {
-		u8 mtrr = pat >> (8 * i);
-
-		if (mtrr2protval[mtrr] == MTRR2PROTVAL_INVALID)
-			mtrr2protval[mtrr] = __cm_idx2pte(i);
-	}
-
-	for (i = 0; i < 8; i++) {
-		if (mtrr2protval[i] == MTRR2PROTVAL_INVALID) {
-			u8 fallback = fallback_mtrr_type(i);
-			mtrr2protval[i] = mtrr2protval[fallback];
-			BUG_ON(mtrr2protval[i] == MTRR2PROTVAL_INVALID);
-		}
-	}
-}
-
 static __init int svm_hardware_setup(void)
 {
 	int cpu;
@@ -990,7 +932,6 @@ static __init int svm_hardware_setup(void)
 	} else
 		kvm_disable_tdp();
 
-	build_mtrr2protval();
 	return 0;
 
 err:
@@ -1145,43 +1086,6 @@ static u64 svm_compute_tsc_offset(struct kvm_vcpu *vcpu, u64 target_tsc)
 	return target_tsc - tsc;
 }
 
-static void svm_set_guest_pat(struct vcpu_svm *svm, u64 *g_pat)
-{
-	struct kvm_vcpu *vcpu = &svm->vcpu;
-
-	/* Unlike Intel, AMD takes the guest's CR0.CD into account.
-	 *
-	 * AMD does not have IPAT.  To emulate it for the case of guests
-	 * with no assigned devices, just set everything to WB.  If guests
-	 * have assigned devices, however, we cannot force WB for RAM
-	 * pages only, so use the guest PAT directly.
-	 */
-	if (!kvm_arch_has_assigned_device(vcpu->kvm))
-		*g_pat = 0x0606060606060606;
-	else
-		*g_pat = vcpu->arch.pat;
-}
-
-static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
-{
-	u8 mtrr;
-
-	/*
-	 * 1. MMIO: trust guest MTRR, so same as item 3.
-	 * 2. No passthrough: always map as WB, and force guest PAT to WB as well
-	 * 3. Passthrough: can't guarantee the result, try to trust guest.
-	 */
-	if (!is_mmio && !kvm_arch_has_assigned_device(vcpu->kvm))
-		return 0;
-
-	if (!kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_CD_NW_CLEARED) &&
-	    kvm_read_cr0(vcpu) & X86_CR0_CD)
-		return _PAGE_NOCACHE;
-
-	mtrr = kvm_mtrr_get_guest_memory_type(vcpu, gfn);
-	return mtrr2protval[mtrr];
-}
-
 static void init_vmcb(struct vcpu_svm *svm, bool init_event)
 {
 	struct vmcb_control_area *control = &svm->vmcb->control;
@@ -1278,7 +1182,6 @@ static void init_vmcb(struct vcpu_svm *svm, bool init_event)
 		clr_cr_intercept(svm, INTERCEPT_CR3_READ);
 		clr_cr_intercept(svm, INTERCEPT_CR3_WRITE);
 		save->g_pat = svm->vcpu.arch.pat;
-		svm_set_guest_pat(svm, &save->g_pat);
 		save->cr3 = 0;
 		save->cr4 = 0;
 	}
@@ -1673,10 +1576,13 @@ static void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 
 	if (!vcpu->fpu_active)
 		cr0 |= X86_CR0_TS;
-
+	/*
-	/* These are emulated via page tables.  */
+	 * re-enable caching here because the QEMU bios
-	cr0 &= ~(X86_CR0_CD | X86_CR0_NW);
+	 * does not do it - this results in some delay at
-
+	 * reboot
+	 */
+	if (kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_CD_NW_CLEARED))
+		cr0 &= ~(X86_CR0_CD | X86_CR0_NW);
 	svm->vmcb->save.cr0 = cr0;
 	mark_dirty(svm->vmcb, VMCB_CR);
 	update_cr0_intercept(svm);
@@ -3351,16 +3257,6 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr)
 	case MSR_VM_IGNNE:
 		vcpu_unimpl(vcpu, "unimplemented wrmsr: 0x%x data 0x%llx\n", ecx, data);
 		break;
-	case MSR_IA32_CR_PAT:
-		if (npt_enabled) {
-			if (!kvm_mtrr_valid(vcpu, MSR_IA32_CR_PAT, data))
-				return 1;
-			vcpu->arch.pat = data;
-			svm_set_guest_pat(svm, &svm->vmcb->save.g_pat);
-			mark_dirty(svm->vmcb, VMCB_NPT);
-			break;
-		}
-		/* fall through */
 	default:
 		return kvm_set_msr_common(vcpu, msr);
 	}
@@ -4195,6 +4091,11 @@ static bool svm_has_high_real_mode_segbase(void)
 	return true;
 }
 
+static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
+{
+	return 0;
+}
+
 static void svm_cpuid_update(struct kvm_vcpu *vcpu)
 {
 }

arch/x86/kvm/vmx.c

@@ -8617,17 +8617,22 @@ static u64 vmx_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
 	u64 ipat = 0;
 
 	/* For VT-d and EPT combination
-	 * 1. MMIO: guest may want to apply WC, trust it.
+	 * 1. MMIO: always map as UC
 	 * 2. EPT with VT-d:
 	 *   a. VT-d without snooping control feature: can't guarantee the
-	 *	result, try to trust guest.  So the same as item 1.
+	 *	result, try to trust guest.
 	 *   b. VT-d with snooping control feature: snooping control feature of
 	 *	VT-d engine can guarantee the cache correctness. Just set it
 	 *	to WB to keep consistent with host. So the same as item 3.
 	 * 3. EPT without VT-d: always map as WB and set IPAT=1 to keep
 	 *    consistent with host MTRR
 	 */
-	if (!is_mmio && !kvm_arch_has_noncoherent_dma(vcpu->kvm)) {
+	if (is_mmio) {
+		cache = MTRR_TYPE_UNCACHABLE;
+		goto exit;
+	}
+
+	if (!kvm_arch_has_noncoherent_dma(vcpu->kvm)) {
 		ipat = VMX_EPT_IPAT_BIT;
 		cache = MTRR_TYPE_WRBACK;
 		goto exit;

arch/x86/kvm/x86.c

@@ -1708,8 +1708,6 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 		vcpu->pvclock_set_guest_stopped_request = false;
 	}
 
-	pvclock_flags |= PVCLOCK_COUNTS_FROM_ZERO;
-
 	/* If the host uses TSC clocksource, then it is stable */
 	if (use_master_clock)
 		pvclock_flags |= PVCLOCK_TSC_STABLE_BIT;
@@ -2007,8 +2005,6 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 					&vcpu->requests);
 
 			ka->boot_vcpu_runs_old_kvmclock = tmp;
-
-			ka->kvmclock_offset = -get_kernel_ns();
 		}
 
 		vcpu->arch.time = data;

arch/x86/mm/init_64.c

@@ -1132,7 +1132,7 @@ void mark_rodata_ro(void)
 	 * has been zapped already via cleanup_highmem().
 	 */
 	all_end = roundup((unsigned long)_brk_end, PMD_SIZE);
-	set_memory_nx(rodata_start, (all_end - rodata_start) >> PAGE_SHIFT);
+	set_memory_nx(text_end, (all_end - text_end) >> PAGE_SHIFT);
 
 	rodata_test();
 

arch/x86/platform/efi/efi.c

@@ -704,6 +704,70 @@ static void *realloc_pages(void *old_memmap, int old_shift)
 	return ret;
 }
 
+/*
+ * Iterate the EFI memory map in reverse order because the regions
+ * will be mapped top-down. The end result is the same as if we had
+ * mapped things forward, but doesn't require us to change the
+ * existing implementation of efi_map_region().
+ */
+static inline void *efi_map_next_entry_reverse(void *entry)
+{
+	/* Initial call */
+	if (!entry)
+		return memmap.map_end - memmap.desc_size;
+
+	entry -= memmap.desc_size;
+	if (entry < memmap.map)
+		return NULL;
+
+	return entry;
+}
+
+/*
+ * efi_map_next_entry - Return the next EFI memory map descriptor
+ * @entry: Previous EFI memory map descriptor
+ *
+ * This is a helper function to iterate over the EFI memory map, which
+ * we do in different orders depending on the current configuration.
+ *
+ * To begin traversing the memory map @entry must be %NULL.
+ *
+ * Returns %NULL when we reach the end of the memory map.
+ */
+static void *efi_map_next_entry(void *entry)
+{
+	if (!efi_enabled(EFI_OLD_MEMMAP) && efi_enabled(EFI_64BIT)) {
+		/*
+		 * Starting in UEFI v2.5 the EFI_PROPERTIES_TABLE
+		 * config table feature requires us to map all entries
+		 * in the same order as they appear in the EFI memory
+		 * map. That is to say, entry N must have a lower
+		 * virtual address than entry N+1. This is because the
+		 * firmware toolchain leaves relative references in
+		 * the code/data sections, which are split and become
+		 * separate EFI memory regions. Mapping things
+		 * out-of-order leads to the firmware accessing
+		 * unmapped addresses.
+		 *
+		 * Since we need to map things this way whether or not
+		 * the kernel actually makes use of
+		 * EFI_PROPERTIES_TABLE, let's just switch to this
+		 * scheme by default for 64-bit.
+		 */
+		return efi_map_next_entry_reverse(entry);
+	}
+
+	/* Initial call */
+	if (!entry)
+		return memmap.map;
+
+	entry += memmap.desc_size;
+	if (entry >= memmap.map_end)
+		return NULL;
+
+	return entry;
+}
+
 /*
  * Map the efi memory ranges of the runtime services and update new_mmap with
  * virtual addresses.
@@ -714,7 +778,8 @@ static void * __init efi_map_regions(int *count, int *pg_shift)
 	unsigned long left = 0;
 	efi_memory_desc_t *md;
 
-	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
+	p = NULL;
+	while ((p = efi_map_next_entry(p))) {
 		md = p;
 		if (!(md->attribute & EFI_MEMORY_RUNTIME)) {
 #ifdef CONFIG_X86_64

arch/xtensa/include/asm/Kbuild

@@ -28,4 +28,5 @@ generic-y += statfs.h
 generic-y += termios.h
 generic-y += topology.h
 generic-y += trace_clock.h
+generic-y += word-at-a-time.h
 generic-y += xor.h

block/blk-mq-cpumap.c

@@ -31,7 +31,8 @@ static int get_first_sibling(unsigned int cpu)
 	return cpu;
 }
 
-int blk_mq_update_queue_map(unsigned int *map, unsigned int nr_queues)
+int blk_mq_update_queue_map(unsigned int *map, unsigned int nr_queues,
+			    const struct cpumask *online_mask)
 {
 	unsigned int i, nr_cpus, nr_uniq_cpus, queue, first_sibling;
 	cpumask_var_t cpus;
@@ -41,7 +42,7 @@ int blk_mq_update_queue_map(unsigned int *map, unsigned int nr_queues)
 
 	cpumask_clear(cpus);
 	nr_cpus = nr_uniq_cpus = 0;
-	for_each_online_cpu(i) {
+	for_each_cpu(i, online_mask) {
 		nr_cpus++;
 		first_sibling = get_first_sibling(i);
 		if (!cpumask_test_cpu(first_sibling, cpus))
@@ -51,7 +52,7 @@ int blk_mq_update_queue_map(unsigned int *map, unsigned int nr_queues)
 
 	queue = 0;
 	for_each_possible_cpu(i) {
-		if (!cpu_online(i)) {
+		if (!cpumask_test_cpu(i, online_mask)) {
 			map[i] = 0;
 			continue;
 		}
@@ -95,7 +96,7 @@ unsigned int *blk_mq_make_queue_map(struct blk_mq_tag_set *set)
 	if (!map)
 		return NULL;
 
-	if (!blk_mq_update_queue_map(map, set->nr_hw_queues))
+	if (!blk_mq_update_queue_map(map, set->nr_hw_queues, cpu_online_mask))
 		return map;
 
 	kfree(map);

block/blk-mq-sysfs.c

@@ -229,8 +229,6 @@ static ssize_t blk_mq_hw_sysfs_cpus_show(struct blk_mq_hw_ctx *hctx, char *page)
 	unsigned int i, first = 1;
 	ssize_t ret = 0;
 
-	blk_mq_disable_hotplug();
-
 	for_each_cpu(i, hctx->cpumask) {
 		if (first)
 			ret += sprintf(ret + page, "%u", i);
@@ -240,8 +238,6 @@ static ssize_t blk_mq_hw_sysfs_cpus_show(struct blk_mq_hw_ctx *hctx, char *page)
 		first = 0;
 	}
 
-	blk_mq_enable_hotplug();
-
 	ret += sprintf(ret + page, "\n");
 	return ret;
 }
@@ -343,7 +339,7 @@ static void blk_mq_unregister_hctx(struct blk_mq_hw_ctx *hctx)
 	struct blk_mq_ctx *ctx;
 	int i;
 
-	if (!hctx->nr_ctx || !(hctx->flags & BLK_MQ_F_SYSFS_UP))
+	if (!hctx->nr_ctx)
 		return;
 
 	hctx_for_each_ctx(hctx, ctx, i)
@@ -358,7 +354,7 @@ static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx)
 	struct blk_mq_ctx *ctx;
 	int i, ret;
 
-	if (!hctx->nr_ctx || !(hctx->flags & BLK_MQ_F_SYSFS_UP))
+	if (!hctx->nr_ctx)
 		return 0;
 
 	ret = kobject_add(&hctx->kobj, &q->mq_kobj, "%u", hctx->queue_num);
@@ -381,6 +377,8 @@ void blk_mq_unregister_disk(struct gendisk *disk)
 	struct blk_mq_ctx *ctx;
 	int i, j;
 
+	blk_mq_disable_hotplug();
+
 	queue_for_each_hw_ctx(q, hctx, i) {
 		blk_mq_unregister_hctx(hctx);
 
@@ -395,6 +393,9 @@ void blk_mq_unregister_disk(struct gendisk *disk)
 	kobject_put(&q->mq_kobj);
 
 	kobject_put(&disk_to_dev(disk)->kobj);
+
+	q->mq_sysfs_init_done = false;
+	blk_mq_enable_hotplug();
 }
 
 static void blk_mq_sysfs_init(struct request_queue *q)
@@ -425,27 +426,30 @@ int blk_mq_register_disk(struct gendisk *disk)
 	struct blk_mq_hw_ctx *hctx;
 	int ret, i;
 
+	blk_mq_disable_hotplug();
+
 	blk_mq_sysfs_init(q);
 
 	ret = kobject_add(&q->mq_kobj, kobject_get(&dev->kobj), "%s", "mq");
 	if (ret < 0)
-		return ret;
+		goto out;
 
 	kobject_uevent(&q->mq_kobj, KOBJ_ADD);
 
 	queue_for_each_hw_ctx(q, hctx, i) {
-		hctx->flags |= BLK_MQ_F_SYSFS_UP;
 		ret = blk_mq_register_hctx(hctx);
 		if (ret)
 			break;
 	}
 
-	if (ret) {
+	if (ret)
 		blk_mq_unregister_disk(disk);
-		return ret;
+	else
-	}
+		q->mq_sysfs_init_done = true;
+out:
+	blk_mq_enable_hotplug();
 
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(blk_mq_register_disk);
 
@@ -454,6 +458,9 @@ void blk_mq_sysfs_unregister(struct request_queue *q)
 	struct blk_mq_hw_ctx *hctx;
 	int i;
 
+	if (!q->mq_sysfs_init_done)
+		return;
+
 	queue_for_each_hw_ctx(q, hctx, i)
 		blk_mq_unregister_hctx(hctx);
 }
@@ -463,6 +470,9 @@ int blk_mq_sysfs_register(struct request_queue *q)
 	struct blk_mq_hw_ctx *hctx;
 	int i, ret = 0;
 
+	if (!q->mq_sysfs_init_done)
+		return ret;
+
 	queue_for_each_hw_ctx(q, hctx, i) {
 		ret = blk_mq_register_hctx(hctx);
 		if (ret)

block/blk-mq-tag.c

@@ -471,17 +471,30 @@ void blk_mq_all_tag_busy_iter(struct blk_mq_tags *tags, busy_tag_iter_fn *fn,
 }
 EXPORT_SYMBOL(blk_mq_all_tag_busy_iter);
 
-void blk_mq_tag_busy_iter(struct blk_mq_hw_ctx *hctx, busy_iter_fn *fn,
+void blk_mq_queue_tag_busy_iter(struct request_queue *q, busy_iter_fn *fn,
 		void *priv)
 {
-	struct blk_mq_tags *tags = hctx->tags;
+	struct blk_mq_hw_ctx *hctx;
+	int i;
+
+
+	queue_for_each_hw_ctx(q, hctx, i) {
+		struct blk_mq_tags *tags = hctx->tags;
+
+		/*
+		 * If not software queues are currently mapped to this
+		 * hardware queue, there's nothing to check
+		 */
+		if (!blk_mq_hw_queue_mapped(hctx))
+			continue;
+
+		if (tags->nr_reserved_tags)
+			bt_for_each(hctx, &tags->breserved_tags, 0, fn, priv, true);
+		bt_for_each(hctx, &tags->bitmap_tags, tags->nr_reserved_tags, fn, priv,
+		      false);
+	}
 
-	if (tags->nr_reserved_tags)
-		bt_for_each(hctx, &tags->breserved_tags, 0, fn, priv, true);
-	bt_for_each(hctx, &tags->bitmap_tags, tags->nr_reserved_tags, fn, priv,
-			false);
 }
-EXPORT_SYMBOL(blk_mq_tag_busy_iter);
 
 static unsigned int bt_unused_tags(struct blk_mq_bitmap_tags *bt)
 {

block/blk-mq-tag.h

@@ -58,6 +58,8 @@ extern ssize_t blk_mq_tag_sysfs_show(struct blk_mq_tags *tags, char *page);
 extern void blk_mq_tag_init_last_tag(struct blk_mq_tags *tags, unsigned int *last_tag);
 extern int blk_mq_tag_update_depth(struct blk_mq_tags *tags, unsigned int depth);
 extern void blk_mq_tag_wakeup_all(struct blk_mq_tags *tags, bool);
+void blk_mq_queue_tag_busy_iter(struct request_queue *q, busy_iter_fn *fn,
+		void *priv);
 
 enum {
 	BLK_MQ_TAG_CACHE_MIN	= 1,

block/blk-mq.c

@@ -393,14 +393,16 @@ void __blk_mq_complete_request(struct request *rq)
  *	Ends all I/O on a request. It does not handle partial completions.
  *	The actual completion happens out-of-order, through a IPI handler.
  **/
-void blk_mq_complete_request(struct request *rq)
+void blk_mq_complete_request(struct request *rq, int error)
 {
 	struct request_queue *q = rq->q;
 
 	if (unlikely(blk_should_fake_timeout(q)))
 		return;
-	if (!blk_mark_rq_complete(rq))
+	if (!blk_mark_rq_complete(rq)) {
+		rq->errors = error;
 		__blk_mq_complete_request(rq);
+	}
 }
 EXPORT_SYMBOL(blk_mq_complete_request);
 
@@ -616,10 +618,8 @@ static void blk_mq_check_expired(struct blk_mq_hw_ctx *hctx,
 		 * If a request wasn't started before the queue was
 		 * marked dying, kill it here or it'll go unnoticed.
 		 */
-		if (unlikely(blk_queue_dying(rq->q))) {
+		if (unlikely(blk_queue_dying(rq->q)))
-			rq->errors = -EIO;
+			blk_mq_complete_request(rq, -EIO);
-			blk_mq_complete_request(rq);
-		}
 		return;
 	}
 	if (rq->cmd_flags & REQ_NO_TIMEOUT)
@@ -641,24 +641,16 @@ static void blk_mq_rq_timer(unsigned long priv)
 		.next		= 0,
 		.next_set	= 0,
 	};
-	struct blk_mq_hw_ctx *hctx;
 	int i;
 
-	queue_for_each_hw_ctx(q, hctx, i) {
+	blk_mq_queue_tag_busy_iter(q, blk_mq_check_expired, &data);
-		/*
-		 * If not software queues are currently mapped to this
-		 * hardware queue, there's nothing to check
-		 */
-		if (!blk_mq_hw_queue_mapped(hctx))
-			continue;
-
-		blk_mq_tag_busy_iter(hctx, blk_mq_check_expired, &data);
-	}
 
 	if (data.next_set) {
 		data.next = blk_rq_timeout(round_jiffies_up(data.next));
 		mod_timer(&q->timeout, data.next);
 	} else {
+		struct blk_mq_hw_ctx *hctx;
+
 		queue_for_each_hw_ctx(q, hctx, i) {
 			/* the hctx may be unmapped, so check it here */
 			if (blk_mq_hw_queue_mapped(hctx))
@@ -1789,13 +1781,19 @@ static void blk_mq_init_cpu_queues(struct request_queue *q,
 	}
 }
 
-static void blk_mq_map_swqueue(struct request_queue *q)
+static void blk_mq_map_swqueue(struct request_queue *q,
+			       const struct cpumask *online_mask)
 {
 	unsigned int i;
 	struct blk_mq_hw_ctx *hctx;
 	struct blk_mq_ctx *ctx;
 	struct blk_mq_tag_set *set = q->tag_set;
 
+	/*
+	 * Avoid others reading imcomplete hctx->cpumask through sysfs
+	 */
+	mutex_lock(&q->sysfs_lock);
+
 	queue_for_each_hw_ctx(q, hctx, i) {
 		cpumask_clear(hctx->cpumask);
 		hctx->nr_ctx = 0;
@@ -1806,16 +1804,17 @@ static void blk_mq_map_swqueue(struct request_queue *q)
 	 */
 	queue_for_each_ctx(q, ctx, i) {
 		/* If the cpu isn't online, the cpu is mapped to first hctx */
-		if (!cpu_online(i))
+		if (!cpumask_test_cpu(i, online_mask))
 			continue;
 
 		hctx = q->mq_ops->map_queue(q, i);
 		cpumask_set_cpu(i, hctx->cpumask);
-		cpumask_set_cpu(i, hctx->tags->cpumask);
 		ctx->index_hw = hctx->nr_ctx;
 		hctx->ctxs[hctx->nr_ctx++] = ctx;
 	}
 
+	mutex_unlock(&q->sysfs_lock);
+
 	queue_for_each_hw_ctx(q, hctx, i) {
 		struct blk_mq_ctxmap *map = &hctx->ctx_map;
 
@@ -1851,6 +1850,14 @@ static void blk_mq_map_swqueue(struct request_queue *q)
 		hctx->next_cpu = cpumask_first(hctx->cpumask);
 		hctx->next_cpu_batch = BLK_MQ_CPU_WORK_BATCH;
 	}
+
+	queue_for_each_ctx(q, ctx, i) {
+		if (!cpumask_test_cpu(i, online_mask))
+			continue;
+
+		hctx = q->mq_ops->map_queue(q, i);
+		cpumask_set_cpu(i, hctx->tags->cpumask);
+	}
 }
 
 static void blk_mq_update_tag_set_depth(struct blk_mq_tag_set *set)
@@ -1918,6 +1925,9 @@ void blk_mq_release(struct request_queue *q)
 		kfree(hctx);
 	}
 
+	kfree(q->mq_map);
+	q->mq_map = NULL;
+
 	kfree(q->queue_hw_ctx);
 
 	/* ctx kobj stays in queue_ctx */
@@ -2027,13 +2037,15 @@ struct request_queue *blk_mq_init_allocated_queue(struct blk_mq_tag_set *set,
 	if (blk_mq_init_hw_queues(q, set))
 		goto err_hctxs;
 
+	get_online_cpus();
 	mutex_lock(&all_q_mutex);
+
 	list_add_tail(&q->all_q_node, &all_q_list);
-	mutex_unlock(&all_q_mutex);
-
 	blk_mq_add_queue_tag_set(set, q);
+	blk_mq_map_swqueue(q, cpu_online_mask);
 
-	blk_mq_map_swqueue(q);
+	mutex_unlock(&all_q_mutex);
+	put_online_cpus();
 
 	return q;
 
@@ -2057,30 +2069,27 @@ void blk_mq_free_queue(struct request_queue *q)
 {
 	struct blk_mq_tag_set	*set = q->tag_set;
 
+	mutex_lock(&all_q_mutex);
+	list_del_init(&q->all_q_node);
+	mutex_unlock(&all_q_mutex);
+
 	blk_mq_del_queue_tag_set(q);
 
 	blk_mq_exit_hw_queues(q, set, set->nr_hw_queues);
 	blk_mq_free_hw_queues(q, set);
 
 	percpu_ref_exit(&q->mq_usage_counter);
-
-	kfree(q->mq_map);
-
-	q->mq_map = NULL;
-
-	mutex_lock(&all_q_mutex);
-	list_del_init(&q->all_q_node);
-	mutex_unlock(&all_q_mutex);
 }
 
 /* Basically redo blk_mq_init_queue with queue frozen */
-static void blk_mq_queue_reinit(struct request_queue *q)
+static void blk_mq_queue_reinit(struct request_queue *q,
+				const struct cpumask *online_mask)
 {
 	WARN_ON_ONCE(!atomic_read(&q->mq_freeze_depth));
 
 	blk_mq_sysfs_unregister(q);
 
-	blk_mq_update_queue_map(q->mq_map, q->nr_hw_queues);
+	blk_mq_update_queue_map(q->mq_map, q->nr_hw_queues, online_mask);
 
 	/*
 	 * redo blk_mq_init_cpu_queues and blk_mq_init_hw_queues. FIXME: maybe
@@ -2088,7 +2097,7 @@ static void blk_mq_queue_reinit(struct request_queue *q)
 	 * involves free and re-allocate memory, worthy doing?)
 	 */
 
-	blk_mq_map_swqueue(q);
+	blk_mq_map_swqueue(q, online_mask);
 
 	blk_mq_sysfs_register(q);
 }
@@ -2097,16 +2106,43 @@ static int blk_mq_queue_reinit_notify(struct notifier_block *nb,
 				      unsigned long action, void *hcpu)
 {
 	struct request_queue *q;
+	int cpu = (unsigned long)hcpu;
+	/*
+	 * New online cpumask which is going to be set in this hotplug event.
+	 * Declare this cpumasks as global as cpu-hotplug operation is invoked
+	 * one-by-one and dynamically allocating this could result in a failure.
+	 */
+	static struct cpumask online_new;
 
 	/*
-	 * Before new mappings are established, hotadded cpu might already
+	 * Before hotadded cpu starts handling requests, new mappings must
-	 * start handling requests. This doesn't break anything as we map
+	 * be established.  Otherwise, these requests in hw queue might
-	 * offline CPUs to first hardware queue. We will re-init the queue
+	 * never be dispatched.
-	 * below to get optimal settings.
+	 *
+	 * For example, there is a single hw queue (hctx) and two CPU queues
+	 * (ctx0 for CPU0, and ctx1 for CPU1).
+	 *
+	 * Now CPU1 is just onlined and a request is inserted into
+	 * ctx1->rq_list and set bit0 in pending bitmap as ctx1->index_hw is
+	 * still zero.
+	 *
+	 * And then while running hw queue, flush_busy_ctxs() finds bit0 is
+	 * set in pending bitmap and tries to retrieve requests in
+	 * hctx->ctxs[0]->rq_list.  But htx->ctxs[0] is a pointer to ctx0,
+	 * so the request in ctx1->rq_list is ignored.
 	 */
-	if (action != CPU_DEAD && action != CPU_DEAD_FROZEN &&
+	switch (action & ~CPU_TASKS_FROZEN) {
-	    action != CPU_ONLINE && action != CPU_ONLINE_FROZEN)
+	case CPU_DEAD:
+	case CPU_UP_CANCELED:
+		cpumask_copy(&online_new, cpu_online_mask);
+		break;
+	case CPU_UP_PREPARE:
+		cpumask_copy(&online_new, cpu_online_mask);
+		cpumask_set_cpu(cpu, &online_new);
+		break;
+	default:
 		return NOTIFY_OK;
+	}
 
 	mutex_lock(&all_q_mutex);
 
@@ -2130,7 +2166,7 @@ static int blk_mq_queue_reinit_notify(struct notifier_block *nb,
 	}
 
 	list_for_each_entry(q, &all_q_list, all_q_node)
-		blk_mq_queue_reinit(q);
+		blk_mq_queue_reinit(q, &online_new);
 
 	list_for_each_entry(q, &all_q_list, all_q_node)
 		blk_mq_unfreeze_queue(q);

block/blk-mq.h

@@ -51,7 +51,8 @@ void blk_mq_disable_hotplug(void);
  * CPU -> queue mappings
  */
 extern unsigned int *blk_mq_make_queue_map(struct blk_mq_tag_set *set);
-extern int blk_mq_update_queue_map(unsigned int *map, unsigned int nr_queues);
+extern int blk_mq_update_queue_map(unsigned int *map, unsigned int nr_queues,
+				   const struct cpumask *online_mask);
 extern int blk_mq_hw_queue_to_node(unsigned int *map, unsigned int);
 
 /*

crypto/asymmetric_keys/x509_public_key.c

@@ -332,10 +332,6 @@ static int x509_key_preparse(struct key_preparsed_payload *prep)
 		srlen = cert->raw_serial_size;
 		q = cert->raw_serial;
 	}
-	if (srlen > 1 && *q == 0) {
-		srlen--;
-		q++;
-	}
 
 	ret = -ENOMEM;
 	desc = kmalloc(sulen + 2 + srlen * 2 + 1, GFP_KERNEL);