[netdrvr] Remove Becker-template 'io_size' member, when invariant

Becker-derived drivers often have the 'io_size' member in their chip
info struct, indicating the minimum required size of the I/O resource
(usually a PCI BAR).  For many situations, this number is either
constant or irrelevant (due to pci_iomap convenience behavior).

This change removes the io_size invariant member, and replaces it with a
compile-time constant.

Drivers updated: fealnx, gt96100eth, winbond-840, yellowfin

Additionally,
- gt96100eth: unused 'drv_flags' removed from gt96100eth
- winbond-840: unused struct match_info removed
- winbond-840: mark pci_id_tbl[] const, __devinitdata

Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/net/fealnx.c

@@ -146,14 +146,13 @@ enum phy_type_flags {
 
 struct chip_info {
 	char *chip_name;
-	int io_size;
 	int flags;
 };
 
 static const struct chip_info skel_netdrv_tbl[] = {
-	{"100/10M Ethernet PCI Adapter", 136, HAS_MII_XCVR},
+ 	{ "100/10M Ethernet PCI Adapter",	HAS_MII_XCVR },
-	{"100/10M Ethernet PCI Adapter", 136, HAS_CHIP_XCVR},
+	{ "100/10M Ethernet PCI Adapter",	HAS_CHIP_XCVR },
-	{"1000/100/10M Ethernet PCI Adapter", 136, HAS_MII_XCVR},
+	{ "1000/100/10M Ethernet PCI Adapter",	HAS_MII_XCVR },
 };
 
 /* Offsets to the Command and Status Registers. */

drivers/net/gt96100eth.c

@@ -699,7 +699,6 @@ static int __init gt96100_probe1(struct pci_dev *pci, int port_num)
 	memset(gp, 0, sizeof(*gp)); // clear it
 
 	gp->port_num = port_num;
-	gp->io_size = GT96100_ETH_IO_SIZE;
 	gp->port_offset = port_num * GT96100_ETH_IO_SIZE;
 	gp->phy_addr = phy_addr;
 	gp->chip_rev = chip_rev;
@@ -1531,7 +1530,7 @@ static void gt96100_cleanup_module(void)
 				+ sizeof(gt96100_td_t) * TX_RING_SIZE,
 				gp->rx_ring);
 			free_netdev(gtif->dev);
-			release_region(gtif->iobase, gp->io_size);
+			release_region(gtif->iobase, GT96100_ETH_IO_SIZE);
 		}
 	}
 }

drivers/net/gt96100eth.h

@@ -331,7 +331,6 @@ struct gt96100_private {
 	mib_counters_t mib;
 	struct net_device_stats stats;
 
-	int io_size;
 	int port_num;  // 0 or 1
 	int chip_rev;
 	u32 port_offset;
@@ -340,7 +339,6 @@ struct gt96100_private {
 	u32 last_psr; // last value of the port status register
 
 	int options;     /* User-settable misc. driver options. */
-	int drv_flags;
 	struct timer_list timer;
 	spinlock_t lock; /* Serialise access to device */
 };

drivers/net/tulip/winbond-840.c

@@ -224,24 +224,21 @@ static const struct pci_device_id w840_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE(pci, w840_pci_tbl);
 
+enum {
+	netdev_res_size		= 128,	/* size of PCI BAR resource */
+};
+
 struct pci_id_info {
         const char *name;
-        struct match_info {
-                int     pci, pci_mask, subsystem, subsystem_mask;
-                int revision, revision_mask;                            /* Only 8 bits. */
-        } id;
-        int io_size;                            /* Needed for I/O region check or ioremap(). */
         int drv_flags;		/* Driver use, intended as capability flags. */
 };
-static struct pci_id_info pci_id_tbl[] = {
+
-	{"Winbond W89c840",			/* Sometime a Level-One switch card. */
+static const struct pci_id_info pci_id_tbl[] __devinitdata = {
-	 { 0x08401050, 0xffffffff, 0x81530000, 0xffff0000 },
+	{ 				/* Sometime a Level-One switch card. */
-	   128, CanHaveMII | HasBrokenTx | FDXOnNoMII},
+	  "Winbond W89c840",	CanHaveMII | HasBrokenTx | FDXOnNoMII},
-	{"Winbond W89c840", { 0x08401050, 0xffffffff, },
+	{ "Winbond W89c840",	CanHaveMII | HasBrokenTx},
-	   128, CanHaveMII | HasBrokenTx},
+	{ "Compex RL100-ATX",	CanHaveMII | HasBrokenTx},
-	{"Compex RL100-ATX", { 0x201111F6, 0xffffffff,},
+	{ }	/* terminate list. */
-	   128, CanHaveMII | HasBrokenTx},
-	{NULL,},					/* 0 terminated list. */
 };
 
 /* This driver was written to use PCI memory space, however some x86 systems
@@ -399,7 +396,7 @@ static int __devinit w840_probe1 (struct pci_dev *pdev,
 #ifdef USE_IO_OPS
 	bar = 0;
 #endif
-	ioaddr = pci_iomap(pdev, bar, pci_id_tbl[chip_idx].io_size);
+	ioaddr = pci_iomap(pdev, bar, netdev_res_size);
 	if (!ioaddr)
 		goto err_out_free_res;
 

drivers/net/yellowfin.c

@@ -215,8 +215,11 @@ enum capability_flags {
 	HasMACAddrBug=32, /* Only on early revs.  */
 	DontUseEeprom=64, /* Don't read the MAC from the EEPROm. */
 };
+
 /* The PCI I/O space extent. */
-#define YELLOWFIN_SIZE 0x100
+enum {
+	YELLOWFIN_SIZE	= 0x100,
+};
 
 struct pci_id_info {
         const char *name;
@@ -224,16 +227,14 @@ struct pci_id_info {
                 int     pci, pci_mask, subsystem, subsystem_mask;
                 int revision, revision_mask;                            /* Only 8 bits. */
         } id;
-        int io_size;                            /* Needed for I/O region check or ioremap(). */
         int drv_flags;                          /* Driver use, intended as capability flags. */
 };
 
 static const struct pci_id_info pci_id_tbl[] = {
 	{"Yellowfin G-NIC Gigabit Ethernet", { 0x07021000, 0xffffffff},
-	 YELLOWFIN_SIZE,
 	 FullTxStatus | IsGigabit | HasMulticastBug | HasMACAddrBug | DontUseEeprom},
 	{"Symbios SYM83C885", { 0x07011000, 0xffffffff},
-	 YELLOWFIN_SIZE, HasMII | DontUseEeprom },
+	  HasMII | DontUseEeprom },
 	{ }
 };