This pull request contains Broadcom ARM-based SoCs Device Tree fixes for

4.16, please pull the following:
 
 - Mathieu fixes leading 0x and 0's from bindings and Device Tree source
   files, he has done this treewide and most of his changes are already in
   4.16
 
 - Stefan provides two changes to the BCM283x DTS files in order to fix
   DTC warnings
 
 - Florian fixes the amount of RAM on the BCM958625HR reference board to
   properly limit to what is initialized by the bootloader
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJalfuUAAoJEIfQlpxEBwcEaMoQAIR2oLcNZcrUzsgOuBSQ/m1N
 +EpXw5TIeDzZRIdNTqofcldGDn0FMnAsPEBnMMYCti+2iPntPGK64IFAD0u7E8JW
 +CU6sfk3SYijPP/nz5/KOSwRZ2KrDombYx73yrXqY2hs4kYupT078NfiI70jZYSB
 6v8cua4Pg/Uw9c2ZSC/lkgrW3G1ZImAxA6tgAOZvRaq7qgCBlBvWEweLIgMcBAGY
 Eq5p6KsmC01/1QGNV0sL9v90Mg8uAe3IJK0hGgk57BeYERcyVZ/V1C6veQmiiyjj
 XYcILm2ww3KOfbZYslwKBfr9V76lFcsTPQD16Z8IOWTL9X/B0DRXDXiRnUX5P6w+
 ZIzVBjLH8UxSU5bgD2tXVBWfEKs/kgvQPAv+8FlpCU0bY7fB2y8E6Pr44FVH/dTV
 7Vkm60Jz9AFGVjaqhx+t8hyjQ7g2NQGwonWYGUWYXD7Wi+OK7cazC49lnebZJyPN
 rSJjOWGxblHUAh2CjGUQNyk4CplbUybuo8441xacGK2BXJS0gl+xvGdxY+uaUcbc
 zMb1Ox4I0gpe8xpWcc7vyKt+cgWCaXnyLHpFdcaC3bBT63O04yVU5mirlHYQu/NR
 R/yY7lPStA+DzL6uihRi4K05+BoO12J7I3Mm0Wq//KgE1ij7LeHL7Nzy+AzQI2Rs
 Dy1H//EWpDvfZTbONIwz
 =9RVY
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.16/devicetree-fixes' of https://github.com/Broadcom/stblinux into fixes

Pull "Broadcom devicetree fixes for 4.16" from Florian Fainelli:

This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
4.16, please pull the following:

- Mathieu fixes leading 0x and 0's from bindings and Device Tree source
  files, he has done this treewide and most of his changes are already in
  4.16

- Stefan provides two changes to the BCM283x DTS files in order to fix
  DTC warnings

- Florian fixes the amount of RAM on the BCM958625HR reference board to
  properly limit to what is initialized by the bootloader

* tag 'arm-soc/for-4.16/devicetree-fixes' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm283x: Move arm-pmu out of soc node
  ARM: dts: bcm283x: Fix unit address of local_intc
  ARM: dts: NSP: Fix amount of RAM on BCM958625HR
  ARM: BCM: dts: Remove leading 0x and 0s from bindings notation

arch/arm/boot/dts/bcm11351.dtsi

@@ -55,7 +55,7 @@ gic: interrupt-controller@3ff00100 {
 		      <0x3ff00100 0x100>;
 	};
 
-	smc@0x3404c000 {
+	smc@3404c000 {
 		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
 		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
 	};

arch/arm/boot/dts/bcm21664.dtsi

@@ -55,7 +55,7 @@ gic: interrupt-controller@3ff00100 {
 		      <0x3ff00100 0x100>;
 	};
 
-	smc@0x3404e000 {
+	smc@3404e000 {
 		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
 		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
 	};

arch/arm/boot/dts/bcm2835.dtsi

@@ -18,10 +18,10 @@ cpu@0 {
 	soc {
 		ranges = <0x7e000000 0x20000000 0x02000000>;
 		dma-ranges = <0x40000000 0x00000000 0x20000000>;
+	};
 
-		arm-pmu {
-			compatible = "arm,arm1176-pmu";
-		};
+	arm-pmu {
+		compatible = "arm,arm1176-pmu";
 	};
 };
 

arch/arm/boot/dts/bcm2836.dtsi

@@ -9,19 +9,19 @@ soc {
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc {
+		local_intc: local_intc@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupt-parent = <&local_intc>;
 		};
+	};
 
-		arm-pmu {
-			compatible = "arm,cortex-a7-pmu";
-			interrupt-parent = <&local_intc>;
-			interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
-		};
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	timer {

arch/arm/boot/dts/bcm2837.dtsi

@@ -8,7 +8,7 @@ soc {
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc {
+		local_intc: local_intc@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;

arch/arm/boot/dts/bcm283x.dtsi

@@ -465,7 +465,7 @@ thermal: thermal@7e212000 {
 			status = "disabled";
 		};
 
-		aux: aux@0x7e215000 {
+		aux: aux@7e215000 {
 			compatible = "brcm,bcm2835-aux";
 			#clock-cells = <1>;
 			reg = <0x7e215000 0x8>;

arch/arm/boot/dts/bcm958625hr.dts

@@ -49,7 +49,7 @@ chosen {
 
 	memory {
 		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
+		reg = <0x60000000 0x20000000>;
 	};
 
 	gpio-restart {