diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 29d162b24d8d..a7db1ab60884 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1166,6 +1166,7 @@ enum intel_sbi_destination {
 #define QUIRK_INVERT_BRIGHTNESS (1<<2)
 #define QUIRK_BACKLIGHT_PRESENT (1<<3)
 #define QUIRK_PIN_SWIZZLED_PAGES (1<<5)
+#define QUIRK_INCREASE_T12_DELAY (1<<6)
 
 struct intel_fbdev;
 struct intel_fbc_work;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 9b6689ef5e30..ede3c6c02ec5 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -14771,6 +14771,17 @@ static void quirk_backlight_present(struct drm_device *dev)
 	DRM_INFO("applying backlight present quirk\n");
 }
 
+/* Toshiba Satellite P50-C-18C requires T12 delay to be min 800ms
+ * which is 300 ms greater than eDP spec T12 min.
+ */
+static void quirk_increase_t12_delay(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+
+	dev_priv->quirks |= QUIRK_INCREASE_T12_DELAY;
+	DRM_INFO("Applying T12 delay quirk\n");
+}
+
 struct intel_quirk {
 	int device;
 	int subsystem_vendor;
@@ -14854,6 +14865,9 @@ static struct intel_quirk intel_quirks[] = {
 
 	/* Dell Chromebook 11 (2015 version) */
 	{ 0x0a16, 0x1028, 0x0a35, quirk_backlight_present },
+
+	/* Toshiba Satellite P50-C-18C */
+	{ 0x191B, 0x1179, 0xF840, quirk_increase_t12_delay },
 };
 
 static void intel_init_quirks(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 0445d11224d4..a9022d13e959 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -5255,6 +5255,16 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
 	intel_pps_dump_state("cur", &cur);
 
 	vbt = dev_priv->vbt.edp.pps;
+	/* On Toshiba Satellite P50-C-18C system the VBT T12 delay
+	 * of 500ms appears to be too short. Ocassionally the panel
+	 * just fails to power back on. Increasing the delay to 800ms
+	 * seems sufficient to avoid this problem.
+	 */
+	if (dev_priv->quirks & QUIRK_INCREASE_T12_DELAY) {
+		vbt.t11_t12 = max_t(u16, vbt.t11_t12, 800 * 10);
+		DRM_DEBUG_KMS("Increasing T12 panel delay as per the quirk to %d\n",
+			      vbt.t11_t12);
+	}
 	/* T11_T12 delay is special and actually in units of 100ms, but zero
 	 * based in the hw (so we need to add 100 ms). But the sw vbt
 	 * table multiplies it with 1000 to make it in units of 100usec,