mirror of https://gitee.com/openkylin/linux.git
ARM: OMAP: Clear GPMC bits when applying new setting.
When setting the GPMC device type, make sure any previous bits are cleared down, before applying the new setting. For OMAP4+ devices MUXADDDATA is a 2-bit field (bits 9:8) where as for OMAP2/3 devices it was only a one bit field (bit 9). For OMAP2/3 devices bit 8 is reserved and the OMAP documentation says to write a 0 to this bit. So clearing bit 8 on OMAP2/3 devices should not be a problem. Hence update the code to handle both bits 8 and 9 for all devices. Signed-off-by: Mark Jackson <mpfj@newflow.co.uk> [jon-hunter@ti.com: updated changelog] Signed-off-by: Jon Hunter <jon-hunter@ti.com>
This commit is contained in:
parent
dca3a78340
commit
c9fb809424
|
@ -613,6 +613,10 @@ int gpmc_cs_configure(int cs, int cmd, int wval)
|
|||
|
||||
case GPMC_CONFIG_DEV_TYPE:
|
||||
regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
|
||||
/* clear 4 target bits */
|
||||
regval &= ~(GPMC_CONFIG1_DEVICETYPE(3) |
|
||||
GPMC_CONFIG1_MUXTYPE(3));
|
||||
/* set the proper value */
|
||||
regval |= GPMC_CONFIG1_DEVICETYPE(wval);
|
||||
if (wval == GPMC_DEVICETYPE_NOR)
|
||||
regval |= GPMC_CONFIG1_MUXADDDATA;
|
||||
|
|
|
@ -58,7 +58,10 @@
|
|||
#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1)
|
||||
#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10)
|
||||
#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0)
|
||||
#define GPMC_CONFIG1_MUXADDDATA (1 << 9)
|
||||
#define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8)
|
||||
#define GPMC_CONFIG1_MUXNONMUX GPMC_CONFIG1_MUXTYPE(0)
|
||||
#define GPMC_CONFIG1_MUXAAD GPMC_CONFIG1_MUXTYPE(1)
|
||||
#define GPMC_CONFIG1_MUXADDDATA GPMC_CONFIG1_MUXTYPE(2)
|
||||
#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4)
|
||||
#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3)
|
||||
#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1))
|
||||
|
|
Loading…
Reference in New Issue