From cb51a0916ae768ecbb246535fa68bb1ae05e8c97 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 29 Aug 2017 13:35:18 -0700 Subject: [PATCH] net: phy: mdio-bcm-unimac: Use correct I/O accessors The driver currently uses __raw_{read,write}l which works for all platforms supported: Broadcom MIPS LE/BE (native endian), ARM LE (native endian) but not ARM BE (registers are still LE). Switch to using the proper accessors for all platforms and explain why Broadcom MIPS BE is special here, in doing so, we introduce a couple of helper functions to abstract these differences. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/mdio-bcm-unimac.c | 32 +++++++++++++++++++++++++------ 1 file changed, 26 insertions(+), 6 deletions(-) diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c index 73c5267a11fd..08e0647b85e2 100644 --- a/drivers/net/phy/mdio-bcm-unimac.c +++ b/drivers/net/phy/mdio-bcm-unimac.c @@ -47,18 +47,38 @@ struct unimac_mdio_priv { void *wait_func_data; }; +static inline u32 unimac_mdio_readl(struct unimac_mdio_priv *priv, u32 offset) +{ + /* MIPS chips strapped for BE will automagically configure the + * peripheral registers for CPU-native byte order. + */ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + return __raw_readl(priv->base + offset); + else + return readl_relaxed(priv->base + offset); +} + +static inline void unimac_mdio_writel(struct unimac_mdio_priv *priv, u32 val, + u32 offset) +{ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + __raw_writel(val, priv->base + offset); + else + writel_relaxed(val, priv->base + offset); +} + static inline void unimac_mdio_start(struct unimac_mdio_priv *priv) { u32 reg; - reg = __raw_readl(priv->base + MDIO_CMD); + reg = unimac_mdio_readl(priv, MDIO_CMD); reg |= MDIO_START_BUSY; - __raw_writel(reg, priv->base + MDIO_CMD); + unimac_mdio_writel(priv, reg, MDIO_CMD); } static inline unsigned int unimac_mdio_busy(struct unimac_mdio_priv *priv) { - return __raw_readl(priv->base + MDIO_CMD) & MDIO_START_BUSY; + return unimac_mdio_readl(priv, MDIO_CMD) & MDIO_START_BUSY; } static int unimac_mdio_poll(void *wait_func_data) @@ -87,7 +107,7 @@ static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg) /* Prepare the read operation */ cmd = MDIO_RD | (phy_id << MDIO_PMD_SHIFT) | (reg << MDIO_REG_SHIFT); - __raw_writel(cmd, priv->base + MDIO_CMD); + unimac_mdio_writel(priv, cmd, MDIO_CMD); /* Start MDIO transaction */ unimac_mdio_start(priv); @@ -96,7 +116,7 @@ static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg) if (ret) return ret; - cmd = __raw_readl(priv->base + MDIO_CMD); + cmd = unimac_mdio_readl(priv, MDIO_CMD); /* Some broken devices are known not to release the line during * turn-around, e.g: Broadcom BCM53125 external switches, so check for @@ -118,7 +138,7 @@ static int unimac_mdio_write(struct mii_bus *bus, int phy_id, /* Prepare the write operation */ cmd = MDIO_WR | (phy_id << MDIO_PMD_SHIFT) | (reg << MDIO_REG_SHIFT) | (0xffff & val); - __raw_writel(cmd, priv->base + MDIO_CMD); + unimac_mdio_writel(priv, cmd, MDIO_CMD); unimac_mdio_start(priv);