openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

USB: ehci-fsl: Fix 'have_sysif_regs' detection 

Previously a check was done on an ID register at the base of a CPU's
internal USB registers to determine if system interface regsiters were
present.  The check looked for an ID register that had the format
ID[0:5] == ~ID[8:13] as described in the MPC5121 User's Manual to
determine if a MPC5121 or MPC83xx/85xx was being used.

There are two issues with this method:
- The ID register is not defined on the MPC83xx/85xx CPUs, so its
  unclear what is being checked on them.
- Newer CPUs such as the P4080 also don't document the ID register, but
  do share the same format as the MPC5121.  Thus the previous code did
  not set 'have_sysif_regs' properly which results in the P4080 not
  properly initializing its USB ports.

Using the device tree 'compatible' node is a cleaner way to determine if
'have_sysif_regs' should be set and resolves the USB initialization issue
seen on the P4080.

Tested on a P4080-based system and compile tested on mpc512x_defconfig
with Freescale EHCI driver enabled.

Cc: Anatolij Gustschin <agust@denx.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Peter Tyser 2011-01-10 17:34:14 -06:00 committed by Greg Kroah-Hartman
parent ad84e4a9ef
commit cc604ddd11
3 changed files with 8 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
drivers/usb/host/ehci-fsl.c
View File

@ -52,7 +52,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
struct resource *res;
int irq;
int retval;
unsigned int temp;
pr_debug("initializing FSL-SOC USB Controller\n");
@ -126,18 +125,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
goto err3;
}
/*
* Check if it is MPC5121 SoC, otherwise set pdata->have_sysif_regs
* flag for 83xx or 8536 system interface registers.
*/
if (pdata->big_endian_mmio)
temp = in_be32(hcd->regs + FSL_SOC_USB_ID);
else
temp = in_le32(hcd->regs + FSL_SOC_USB_ID);
if ((temp & ID_MSK) != (~((temp & NID_MSK) >> 8) & ID_MSK))
pdata->have_sysif_regs = 1;
/* Enable USB controller, 83xx or 8536 */
if (pdata->have_sysif_regs)
setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);

3
drivers/usb/host/ehci-fsl.h
View File

@ -19,9 +19,6 @@
#define _EHCI_FSL_H
/* offsets for the non-ehci registers in the FSL SOC USB controller */
#define FSL_SOC_USB_ID 0x0
#define ID_MSK 0x3f
#define NID_MSK 0x3f00
#define FSL_SOC_USB_ULPIVP 0x170
#define FSL_SOC_USB_PORTSC1 0x184
#define PORT_PTS_MSK (3<<30)

11
drivers/usb/host/fsl-mph-dr-of.c
View File

@ -262,19 +262,24 @@ static void fsl_usb2_mpc5121_exit(struct platform_device *pdev)
}
}
struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
static struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
.big_endian_desc = 1,
.big_endian_mmio = 1,
.es = 1,
.have_sysif_regs = 0,
.le_setup_buf = 1,
.init = fsl_usb2_mpc5121_init,
.exit = fsl_usb2_mpc5121_exit,
};
#endif /* CONFIG_PPC_MPC512x */
static struct fsl_usb2_platform_data fsl_usb2_mpc8xxx_pd = {
.have_sysif_regs = 1,
};
static const struct of_device_id fsl_usb2_mph_dr_of_match[] = {
{ .compatible = "fsl-usb2-mph", },
{ .compatible = "fsl-usb2-dr", },
{ .compatible = "fsl-usb2-mph", .data = &fsl_usb2_mpc8xxx_pd, },
{ .compatible = "fsl-usb2-dr", .data = &fsl_usb2_mpc8xxx_pd, },
#ifdef CONFIG_PPC_MPC512x
{ .compatible = "fsl,mpc5121-usb2-dr", .data = &fsl_usb2_mpc5121_pd, },
#endif