openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
  e1000e: increase driver version number
  e1000e: alternate MAC address update
  e1000e: do not disable receiver on 82574/82583
  e1000e: alternate MAC address does not work on device id 0x1060
  PCnet: Fix section mismatch
  bnx2x: disable dcb on 578xx since not supported yet
  bnx2x: properly clean indirect addresses
  bnx2x: prevent race between undi_unload and load flows
  bnx2x: fix select_queue when FCoE is disabled
  bnx2x: init FCOE FP only once
  ipv4: some rt_iif -> rt_route_iif conversions
  net/bridge/netfilter/ebtables.c: use available error handling code
  net/netlabel/netlabel_kapi.c: add missing cleanup code
  net/irda: sh_sir: tidyup compile warning
  net/irda: sh_sir: add missing header
  net/irda: sh_irda: add missing header
  slcan: ldisc generated skbs are received in softirq context
  scm: Capture the full credentials of the scm sender
  tcp: initialize variable ecn_ok in syncookies path
  drivers/net/wireless/wl1251: add missing kfree
  ...
This commit is contained in:
Linus Torvalds 2011-08-12 06:43:53 -07:00
parent eeca7360f7 d80bcf46f1
commit ce8a84ef1e
46 changed files with 605 additions and 107 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
Documentation/networking/bonding.txt
View File

@ -238,6 +238,18 @@ ad_select
This option was added in bonding version 3.4.0.
all_slaves_active
Specifies that duplicate frames (received on inactive ports) should be
dropped (0) or delivered (1).
Normally, bonding will drop duplicate frames (received on inactive
ports), which is desirable for most users. But there are some times
it is nice to allow duplicate frames to be delivered.
The default value is 0 (drop duplicate frames received on inactive
ports).
arp_interval
Specifies the ARP link monitoring frequency in milliseconds.
@ -433,6 +445,23 @@ miimon
determined. See the High Availability section for additional
information. The default value is 0.
min_links
Specifies the minimum number of links that must be active before
asserting carrier. It is similar to the Cisco EtherChannel min-links
feature. This allows setting the minimum number of member ports that
must be up (link-up state) before marking the bond device as up
(carrier on). This is useful for situations where higher level services
such as clustering want to ensure a minimum number of low bandwidth
links are active before switchover. This option only affect 802.3ad
mode.
The default value is 0. This will cause carrier to be asserted (for
802.3ad mode) whenever there is an active aggregator, regardless of the
number of available links in that aggregator. Note that, because an
aggregator cannot be active without at least one available link,
setting this option to 0 or to 1 has the exact same effect.
mode
Specifies one of the bonding policies. The default is

371
Documentation/networking/scaling.txt Normal file
View File

@ -0,0 +1,371 @@
Scaling in the Linux Networking Stack
Introduction
============
This document describes a set of complementary techniques in the Linux
networking stack to increase parallelism and improve performance for
multi-processor systems.
The following technologies are described:
RSS: Receive Side Scaling
RPS: Receive Packet Steering
RFS: Receive Flow Steering
Accelerated Receive Flow Steering
XPS: Transmit Packet Steering
RSS: Receive Side Scaling
=========================
Contemporary NICs support multiple receive and transmit descriptor queues
(multi-queue). On reception, a NIC can send different packets to different
queues to distribute processing among CPUs. The NIC distributes packets by
applying a filter to each packet that assigns it to one of a small number
of logical flows. Packets for each flow are steered to a separate receive
queue, which in turn can be processed by separate CPUs. This mechanism is
generally known as “Receive-side Scaling” (RSS). The goal of RSS and
the other scaling techniques to increase performance uniformly.
Multi-queue distribution can also be used for traffic prioritization, but
that is not the focus of these techniques.
The filter used in RSS is typically a hash function over the network
and/or transport layer headers-- for example, a 4-tuple hash over
IP addresses and TCP ports of a packet. The most common hardware
implementation of RSS uses a 128-entry indirection table where each entry
stores a queue number. The receive queue for a packet is determined
by masking out the low order seven bits of the computed hash for the
packet (usually a Toeplitz hash), taking this number as a key into the
indirection table and reading the corresponding value.
Some advanced NICs allow steering packets to queues based on
programmable filters. For example, webserver bound TCP port 80 packets
can be directed to their own receive queue. Such “n-tuple” filters can
be configured from ethtool (--config-ntuple).
==== RSS Configuration
The driver for a multi-queue capable NIC typically provides a kernel
module parameter for specifying the number of hardware queues to
configure. In the bnx2x driver, for instance, this parameter is called
num_queues. A typical RSS configuration would be to have one receive queue
for each CPU if the device supports enough queues, or otherwise at least
one for each cache domain at a particular cache level (L1, L2, etc.).
The indirection table of an RSS device, which resolves a queue by masked
hash, is usually programmed by the driver at initialization. The
default mapping is to distribute the queues evenly in the table, but the
indirection table can be retrieved and modified at runtime using ethtool
commands (--show-rxfh-indir and --set-rxfh-indir). Modifying the
indirection table could be done to give different queues different
relative weights.
== RSS IRQ Configuration
Each receive queue has a separate IRQ associated with it. The NIC triggers
this to notify a CPU when new packets arrive on the given queue. The
signaling path for PCIe devices uses message signaled interrupts (MSI-X),
that can route each interrupt to a particular CPU. The active mapping
of queues to IRQs can be determined from /proc/interrupts. By default,
an IRQ may be handled on any CPU. Because a non-negligible part of packet
processing takes place in receive interrupt handling, it is advantageous
to spread receive interrupts between CPUs. To manually adjust the IRQ
affinity of each interrupt see Documentation/IRQ-affinity. Some systems
will be running irqbalance, a daemon that dynamically optimizes IRQ
assignments and as a result may override any manual settings.
== Suggested Configuration
RSS should be enabled when latency is a concern or whenever receive
interrupt processing forms a bottleneck. Spreading load between CPUs
decreases queue length. For low latency networking, the optimal setting
is to allocate as many queues as there are CPUs in the system (or the
NIC maximum, if lower). Because the aggregate number of interrupts grows
with each additional queue, the most efficient high-rate configuration
is likely the one with the smallest number of receive queues where no
CPU that processes receive interrupts reaches 100% utilization. Per-cpu
load can be observed using the mpstat utility.
RPS: Receive Packet Steering
============================
Receive Packet Steering (RPS) is logically a software implementation of
RSS. Being in software, it is necessarily called later in the datapath.
Whereas RSS selects the queue and hence CPU that will run the hardware
interrupt handler, RPS selects the CPU to perform protocol processing
above the interrupt handler. This is accomplished by placing the packet
on the desired CPU’s backlog queue and waking up the CPU for processing.
RPS has some advantages over RSS: 1) it can be used with any NIC,
2) software filters can easily be added to hash over new protocols,
3) it does not increase hardware device interrupt rate (although it does
introduce inter-processor interrupts (IPIs)).
RPS is called during bottom half of the receive interrupt handler, when
a driver sends a packet up the network stack with netif_rx() or
netif_receive_skb(). These call the get_rps_cpu() function, which
selects the queue that should process a packet.
The first step in determining the target CPU for RPS is to calculate a
flow hash over the packet’s addresses or ports (2-tuple or 4-tuple hash
depending on the protocol). This serves as a consistent hash of the
associated flow of the packet. The hash is either provided by hardware
or will be computed in the stack. Capable hardware can pass the hash in
the receive descriptor for the packet; this would usually be the same
hash used for RSS (e.g. computed Toeplitz hash). The hash is saved in
skb->rx_hash and can be used elsewhere in the stack as a hash of the
packet’s flow.
Each receive hardware queue has an associated list of CPUs to which
RPS may enqueue packets for processing. For each received packet,
an index into the list is computed from the flow hash modulo the size
of the list. The indexed CPU is the target for processing the packet,
and the packet is queued to the tail of that CPU’s backlog queue. At
the end of the bottom half routine, IPIs are sent to any CPUs for which
packets have been queued to their backlog queue. The IPI wakes backlog
processing on the remote CPU, and any queued packets are then processed
up the networking stack.
==== RPS Configuration
RPS requires a kernel compiled with the CONFIG_RPS kconfig symbol (on
by default for SMP). Even when compiled in, RPS remains disabled until
explicitly configured. The list of CPUs to which RPS may forward traffic
can be configured for each receive queue using a sysfs file entry:
/sys/class/net/<dev>/queues/rx-<n>/rps_cpus
This file implements a bitmap of CPUs. RPS is disabled when it is zero
(the default), in which case packets are processed on the interrupting
CPU. Documentation/IRQ-affinity.txt explains how CPUs are assigned to
the bitmap.
== Suggested Configuration
For a single queue device, a typical RPS configuration would be to set
the rps_cpus to the CPUs in the same cache domain of the interrupting
CPU. If NUMA locality is not an issue, this could also be all CPUs in
the system. At high interrupt rate, it might be wise to exclude the
interrupting CPU from the map since that already performs much work.
For a multi-queue system, if RSS is configured so that a hardware
receive queue is mapped to each CPU, then RPS is probably redundant
and unnecessary. If there are fewer hardware queues than CPUs, then
RPS might be beneficial if the rps_cpus for each queue are the ones that
share the same cache domain as the interrupting CPU for that queue.
RFS: Receive Flow Steering
==========================
While RPS steers packets solely based on hash, and thus generally
provides good load distribution, it does not take into account
application locality. This is accomplished by Receive Flow Steering
(RFS). The goal of RFS is to increase datacache hitrate by steering
kernel processing of packets to the CPU where the application thread
consuming the packet is running. RFS relies on the same RPS mechanisms
to enqueue packets onto the backlog of another CPU and to wake up that
CPU.
In RFS, packets are not forwarded directly by the value of their hash,
but the hash is used as index into a flow lookup table. This table maps
flows to the CPUs where those flows are being processed. The flow hash
(see RPS section above) is used to calculate the index into this table.
The CPU recorded in each entry is the one which last processed the flow.
If an entry does not hold a valid CPU, then packets mapped to that entry
are steered using plain RPS. Multiple table entries may point to the
same CPU. Indeed, with many flows and few CPUs, it is very likely that
a single application thread handles flows with many different flow hashes.
rps_sock_table is a global flow table that contains the *desired* CPU for
flows: the CPU that is currently processing the flow in userspace. Each
table value is a CPU index that is updated during calls to recvmsg and
sendmsg (specifically, inet_recvmsg(), inet_sendmsg(), inet_sendpage()
and tcp_splice_read()).
When the scheduler moves a thread to a new CPU while it has outstanding
receive packets on the old CPU, packets may arrive out of order. To
avoid this, RFS uses a second flow table to track outstanding packets
for each flow: rps_dev_flow_table is a table specific to each hardware
receive queue of each device. Each table value stores a CPU index and a
counter. The CPU index represents the *current* CPU onto which packets
for this flow are enqueued for further kernel processing. Ideally, kernel
and userspace processing occur on the same CPU, and hence the CPU index
in both tables is identical. This is likely false if the scheduler has
recently migrated a userspace thread while the kernel still has packets
enqueued for kernel processing on the old CPU.
The counter in rps_dev_flow_table values records the length of the current
CPU's backlog when a packet in this flow was last enqueued. Each backlog
queue has a head counter that is incremented on dequeue. A tail counter
is computed as head counter + queue length. In other words, the counter
in rps_dev_flow_table[i] records the last element in flow i that has
been enqueued onto the currently designated CPU for flow i (of course,
entry i is actually selected by hash and multiple flows may hash to the
same entry i).
And now the trick for avoiding out of order packets: when selecting the
CPU for packet processing (from get_rps_cpu()) the rps_sock_flow table
and the rps_dev_flow table of the queue that the packet was received on
are compared. If the desired CPU for the flow (found in the
rps_sock_flow table) matches the current CPU (found in the rps_dev_flow
table), the packet is enqueued onto that CPU’s backlog. If they differ,
the current CPU is updated to match the desired CPU if one of the
following is true:
- The current CPU's queue head counter >= the recorded tail counter
value in rps_dev_flow[i]
- The current CPU is unset (equal to NR_CPUS)
- The current CPU is offline
After this check, the packet is sent to the (possibly updated) current
CPU. These rules aim to ensure that a flow only moves to a new CPU when
there are no packets outstanding on the old CPU, as the outstanding
packets could arrive later than those about to be processed on the new
CPU.
==== RFS Configuration
RFS is only available if the kconfig symbol CONFIG_RFS is enabled (on
by default for SMP). The functionality remains disabled until explicitly
configured. The number of entries in the global flow table is set through:
/proc/sys/net/core/rps_sock_flow_entries
The number of entries in the per-queue flow table are set through:
/sys/class/net/<dev>/queues/tx-<n>/rps_flow_cnt
== Suggested Configuration
Both of these need to be set before RFS is enabled for a receive queue.
Values for both are rounded up to the nearest power of two. The
suggested flow count depends on the expected number of active connections
at any given time, which may be significantly less than the number of open
connections. We have found that a value of 32768 for rps_sock_flow_entries
works fairly well on a moderately loaded server.
For a single queue device, the rps_flow_cnt value for the single queue
would normally be configured to the same value as rps_sock_flow_entries.
For a multi-queue device, the rps_flow_cnt for each queue might be
configured as rps_sock_flow_entries / N, where N is the number of
queues. So for instance, if rps_flow_entries is set to 32768 and there
are 16 configured receive queues, rps_flow_cnt for each queue might be
configured as 2048.
Accelerated RFS
===============
Accelerated RFS is to RFS what RSS is to RPS: a hardware-accelerated load
balancing mechanism that uses soft state to steer flows based on where
the application thread consuming the packets of each flow is running.
Accelerated RFS should perform better than RFS since packets are sent
directly to a CPU local to the thread consuming the data. The target CPU
will either be the same CPU where the application runs, or at least a CPU
which is local to the application thread’s CPU in the cache hierarchy.
To enable accelerated RFS, the networking stack calls the
ndo_rx_flow_steer driver function to communicate the desired hardware
queue for packets matching a particular flow. The network stack
automatically calls this function every time a flow entry in
rps_dev_flow_table is updated. The driver in turn uses a device specific
method to program the NIC to steer the packets.
The hardware queue for a flow is derived from the CPU recorded in
rps_dev_flow_table. The stack consults a CPU to hardware queue map which
is maintained by the NIC driver. This is an auto-generated reverse map of
the IRQ affinity table shown by /proc/interrupts. Drivers can use
functions in the cpu_rmap (“CPU affinity reverse map”) kernel library
to populate the map. For each CPU, the corresponding queue in the map is
set to be one whose processing CPU is closest in cache locality.
==== Accelerated RFS Configuration
Accelerated RFS is only available if the kernel is compiled with
CONFIG_RFS_ACCEL and support is provided by the NIC device and driver.
It also requires that ntuple filtering is enabled via ethtool. The map
of CPU to queues is automatically deduced from the IRQ affinities
configured for each receive queue by the driver, so no additional
configuration should be necessary.
== Suggested Configuration
This technique should be enabled whenever one wants to use RFS and the
NIC supports hardware acceleration.
XPS: Transmit Packet Steering
=============================
Transmit Packet Steering is a mechanism for intelligently selecting
which transmit queue to use when transmitting a packet on a multi-queue
device. To accomplish this, a mapping from CPU to hardware queue(s) is
recorded. The goal of this mapping is usually to assign queues
exclusively to a subset of CPUs, where the transmit completions for
these queues are processed on a CPU within this set. This choice
provides two benefits. First, contention on the device queue lock is
significantly reduced since fewer CPUs contend for the same queue
(contention can be eliminated completely if each CPU has its own
transmit queue). Secondly, cache miss rate on transmit completion is
reduced, in particular for data cache lines that hold the sk_buff
structures.
XPS is configured per transmit queue by setting a bitmap of CPUs that
may use that queue to transmit. The reverse mapping, from CPUs to
transmit queues, is computed and maintained for each network device.
When transmitting the first packet in a flow, the function
get_xps_queue() is called to select a queue. This function uses the ID
of the running CPU as a key into the CPU-to-queue lookup table. If the
ID matches a single queue, that is used for transmission. If multiple
queues match, one is selected by using the flow hash to compute an index
into the set.
The queue chosen for transmitting a particular flow is saved in the
corresponding socket structure for the flow (e.g. a TCP connection).
This transmit queue is used for subsequent packets sent on the flow to
prevent out of order (ooo) packets. The choice also amortizes the cost
of calling get_xps_queues() over all packets in the connection. To avoid
ooo packets, the queue for a flow can subsequently only be changed if
skb->ooo_okay is set for a packet in the flow. This flag indicates that
there are no outstanding packets in the flow, so the transmit queue can
change without the risk of generating out of order packets. The
transport layer is responsible for setting ooo_okay appropriately. TCP,
for instance, sets the flag when all data for a connection has been
acknowledged.
==== XPS Configuration
XPS is only available if the kconfig symbol CONFIG_XPS is enabled (on by
default for SMP). The functionality remains disabled until explicitly
configured. To enable XPS, the bitmap of CPUs that may use a transmit
queue is configured using the sysfs file entry:
/sys/class/net/<dev>/queues/tx-<n>/xps_cpus
== Suggested Configuration
For a network device with a single transmission queue, XPS configuration
has no effect, since there is no choice in this case. In a multi-queue
system, XPS is preferably configured so that each CPU maps onto one queue.
If there are as many queues as there are CPUs in the system, then each
queue can also map onto one CPU, resulting in exclusive pairings that
experience no contention. If there are fewer queues than CPUs, then the
best CPUs to share a given queue are probably those that share the cache
with the CPU that processes transmit completions for that queue
(transmit interrupts).
Further Information
===================
RPS and RFS were introduced in kernel 2.6.35. XPS was incorporated into
2.6.38. Original patches were submitted by Tom Herbert
(therbert@google.com)
Accelerated RFS was introduced in 2.6.35. Original patches were
submitted by Ben Hutchings (bhutchings@solarflare.com)
Authors:
Tom Herbert (therbert@google.com)
Willem de Bruijn (willemb@google.com)

35
drivers/net/bnx2x/bnx2x_cmn.c
View File

@ -63,8 +63,9 @@ static inline void bnx2x_bz_fp(struct bnx2x *bp, int index)
fp->disable_tpa = ((bp->flags & TPA_ENABLE_FLAG) == 0);
#ifdef BCM_CNIC
/* We don't want TPA on FCoE, FWD and OOO L2 rings */
bnx2x_fcoe(bp, disable_tpa) = 1;
/* We don't want TPA on an FCoE L2 ring */
if (IS_FCOE_FP(fp))
fp->disable_tpa = 1;
#endif
}
@ -1404,10 +1405,9 @@ void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb)
{
struct bnx2x *bp = netdev_priv(dev);
#ifdef BCM_CNIC
if (NO_FCOE(bp))
return skb_tx_hash(dev, skb);
else {
if (!NO_FCOE(bp)) {
struct ethhdr *hdr = (struct ethhdr *)skb->data;
u16 ether_type = ntohs(hdr->h_proto);
@ -1424,8 +1424,7 @@ u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb)
return bnx2x_fcoe_tx(bp, txq_index);
}
#endif
/* Select a none-FCoE queue: if FCoE is enabled, exclude FCoE L2 ring
*/
/* select a non-FCoE queue */
return __skb_tx_hash(dev, skb, BNX2X_NUM_ETH_QUEUES(bp));
}
@ -1448,6 +1447,28 @@ void bnx2x_set_num_queues(struct bnx2x *bp)
bp->num_queues += NON_ETH_CONTEXT_USE;
}
/**
* bnx2x_set_real_num_queues - configure netdev->real_num_[tx,rx]_queues
*
* @bp: Driver handle
*
* We currently support for at most 16 Tx queues for each CoS thus we will
* allocate a multiple of 16 for ETH L2 rings according to the value of the
* bp->max_cos.
*
* If there is an FCoE L2 queue the appropriate Tx queue will have the next
* index after all ETH L2 indices.
*
* If the actual number of Tx queues (for each CoS) is less than 16 then there
* will be the holes at the end of each group of 16 ETh L2 indices (0..15,
* 16..31,...) with indicies that are not coupled with any real Tx queue.
*
* The proper configuration of skb->queue_mapping is handled by
* bnx2x_select_queue() and __skb_tx_hash().
*
* bnx2x_setup_tc() takes care of the proper TC mappings so that __skb_tx_hash()
* will return a proper Tx index if TC is enabled (netdev->num_tc > 0).
*/
static inline int bnx2x_set_real_num_queues(struct bnx2x *bp)
{
int rc, tx, rx;

2
drivers/net/bnx2x/bnx2x_dcb.c
View File

@ -920,7 +920,7 @@ static void bnx2x_dcbx_admin_mib_updated_params(struct bnx2x *bp,
void bnx2x_dcbx_set_state(struct bnx2x *bp, bool dcb_on, u32 dcbx_enabled)
{
if (!CHIP_IS_E1x(bp)) {
if (!CHIP_IS_E1x(bp) && !CHIP_IS_E3(bp)) {
bp->dcb_state = dcb_on;
bp->dcbx_enabled = dcbx_enabled;
} else {

23
drivers/net/bnx2x/bnx2x_main.c
View File

@ -5798,6 +5798,12 @@ static int bnx2x_init_hw_common(struct bnx2x *bp)
DP(BNX2X_MSG_MCP, "starting common init func %d\n", BP_ABS_FUNC(bp));
/*
* take the UNDI lock to protect undi_unload flow from accessing
* registers while we're resetting the chip
*/
bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
bnx2x_reset_common(bp);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
@ -5808,6 +5814,8 @@ static int bnx2x_init_hw_common(struct bnx2x *bp)
}
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val);
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON);
if (!CHIP_IS_E1x(bp)) {
@ -10251,10 +10259,17 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
/* clean indirect addresses */
pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
PCICFG_VENDOR_ID_OFFSET);
REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0 + BP_PORT(bp)*16, 0);
REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0 + BP_PORT(bp)*16, 0);
REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0 + BP_PORT(bp)*16, 0);
REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0 + BP_PORT(bp)*16, 0);
/* Clean the following indirect addresses for all functions since it
* is not used by the driver.
*/
REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0);
REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0);
REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0);
REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0);
REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0);
REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0);
REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0);
REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0);
/*
* Enable internal target-read (in case we are probed after PF FLR).

16
drivers/net/bnx2x/bnx2x_reg.h
View File

@ -3009,9 +3009,25 @@
/* [R 7] Debug only: Number of used entries in the header FIFO */
#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478
#define PXP2_REG_PGL_ADDR_88_F0 0x120534
/* [R 32] GRC address for configuration access to PCIE config address 0x88.
* any write to this PCIE address will cause a GRC write access to the
* address that's in t this register */
#define PXP2_REG_PGL_ADDR_88_F1 0x120544
#define PXP2_REG_PGL_ADDR_8C_F0 0x120538
/* [R 32] GRC address for configuration access to PCIE config address 0x8c.
* any write to this PCIE address will cause a GRC write access to the
* address that's in t this register */
#define PXP2_REG_PGL_ADDR_8C_F1 0x120548
#define PXP2_REG_PGL_ADDR_90_F0 0x12053c
/* [R 32] GRC address for configuration access to PCIE config address 0x90.
* any write to this PCIE address will cause a GRC write access to the
* address that's in t this register */
#define PXP2_REG_PGL_ADDR_90_F1 0x12054c
#define PXP2_REG_PGL_ADDR_94_F0 0x120540
/* [R 32] GRC address for configuration access to PCIE config address 0x94.
* any write to this PCIE address will cause a GRC write access to the
* address that's in t this register */
#define PXP2_REG_PGL_ADDR_94_F1 0x120550
#define PXP2_REG_PGL_CONTROL0 0x120490
#define PXP2_REG_PGL_CONTROL1 0x120514
#define PXP2_REG_PGL_DEBUG 0x120520

2
drivers/net/can/slcan.c
View File

@ -197,7 +197,7 @@ static void slc_bump(struct slcan *sl)
skb->ip_summed = CHECKSUM_UNNECESSARY;
memcpy(skb_put(skb, sizeof(struct can_frame)),
&cf, sizeof(struct can_frame));
netif_rx(skb);
netif_rx_ni(skb);
sl->dev->stats.rx_packets++;
sl->dev->stats.rx_bytes += cf.can_dlc;

6
drivers/net/e1000e/82571.c
View File

@ -2085,7 +2085,8 @@ struct e1000_info e1000_82574_info = {
| FLAG_HAS_AMT
| FLAG_HAS_CTRLEXT_ON_LOAD,
.flags2 = FLAG2_CHECK_PHY_HANG
| FLAG2_DISABLE_ASPM_L0S,
| FLAG2_DISABLE_ASPM_L0S
| FLAG2_NO_DISABLE_RX,
.pba = 32,
.max_hw_frame_size = DEFAULT_JUMBO,
.get_variants = e1000_get_variants_82571,
@ -2104,7 +2105,8 @@ struct e1000_info e1000_82583_info = {
| FLAG_HAS_AMT
| FLAG_HAS_JUMBO_FRAMES
| FLAG_HAS_CTRLEXT_ON_LOAD,
.flags2 = FLAG2_DISABLE_ASPM_L0S,
.flags2 = FLAG2_DISABLE_ASPM_L0S
| FLAG2_NO_DISABLE_RX,
.pba = 32,
.max_hw_frame_size = DEFAULT_JUMBO,
.get_variants = e1000_get_variants_82571,

1
drivers/net/e1000e/e1000.h
View File

@ -453,6 +453,7 @@ struct e1000_info {
#define FLAG2_DISABLE_ASPM_L0S (1 << 7)
#define FLAG2_DISABLE_AIM (1 << 8)
#define FLAG2_CHECK_PHY_HANG (1 << 9)
#define FLAG2_NO_DISABLE_RX (1 << 10)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))

1
drivers/net/e1000e/ethtool.c
View File

@ -1206,6 +1206,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
rx_ring->next_to_clean = 0;
rctl = er32(RCTL);
if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
ew32(RCTL, rctl & ~E1000_RCTL_EN);
ew32(RDBAL, ((u64) rx_ring->dma & 0xFFFFFFFF));
ew32(RDBAH, ((u64) rx_ring->dma >> 32));

7
drivers/net/e1000e/lib.c
View File

@ -190,7 +190,8 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
/* Check for LOM (vs. NIC) or one of two valid mezzanine cards */
if (!((nvm_data & NVM_COMPAT_LOM) ||
(hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_DUAL) ||
(hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)))
(hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD) ||
(hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES)))
goto out;
ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
@ -200,10 +201,10 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
goto out;
}
if (nvm_alt_mac_addr_offset == 0xFFFF) {
if ((nvm_alt_mac_addr_offset == 0xFFFF) ||
(nvm_alt_mac_addr_offset == 0x0000))
/* There is no Alternate MAC Address */
goto out;
}
if (hw->bus.func == E1000_FUNC_1)
nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;

5
drivers/net/e1000e/netdev.c
View File

@ -56,7 +56,7 @@
#define DRV_EXTRAVERSION "-k"
#define DRV_VERSION "1.3.16" DRV_EXTRAVERSION
#define DRV_VERSION "1.4.4" DRV_EXTRAVERSION
char e1000e_driver_name[] = "e1000e";
const char e1000e_driver_version[] = DRV_VERSION;
@ -2915,6 +2915,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
/* disable receives while setting up the descriptors */
rctl = er32(RCTL);
if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
ew32(RCTL, rctl & ~E1000_RCTL_EN);
e1e_flush();
usleep_range(10000, 20000);
@ -3394,6 +3395,7 @@ void e1000e_down(struct e1000_adapter *adapter)
/* disable receives in the hardware */
rctl = er32(RCTL);
if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
ew32(RCTL, rctl & ~E1000_RCTL_EN);
/* flush and sleep below */
@ -3403,6 +3405,7 @@ void e1000e_down(struct e1000_adapter *adapter)
tctl = er32(TCTL);
tctl &= ~E1000_TCTL_EN;
ew32(TCTL, tctl);
/* flush both disables and wait for them to finish */
e1e_flush();
usleep_range(10000, 20000);

9
drivers/net/gianfar_ptp.c
View File

@ -193,14 +193,9 @@ static void set_alarm(struct etsects *etsects)
/* Caller must hold etsects->lock. */
static void set_fipers(struct etsects *etsects)
{
u32 tmr_ctrl = gfar_read(&etsects->regs->tmr_ctrl);
gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl & (~TE));
gfar_write(&etsects->regs->tmr_prsc, etsects->tmr_prsc);
set_alarm(etsects);
gfar_write(&etsects->regs->tmr_fiper1, etsects->tmr_fiper1);
gfar_write(&etsects->regs->tmr_fiper2, etsects->tmr_fiper2);
set_alarm(etsects);
gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl|TE);
}
/*
@ -511,7 +506,7 @@ static int gianfar_ptp_probe(struct platform_device *dev)
gfar_write(&etsects->regs->tmr_fiper1, etsects->tmr_fiper1);
gfar_write(&etsects->regs->tmr_fiper2, etsects->tmr_fiper2);
set_alarm(etsects);
gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl|FS|RTPE|TE);
gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl|FS|RTPE|TE|FRD);
spin_unlock_irqrestore(&etsects->lock, flags);

2
drivers/net/irda/sh_irda.c
View File

@ -22,6 +22,8 @@
* - DMA transfer support
* - FIFO mode support
*/
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk.h>

4
drivers/net/irda/sh_sir.c
View File

@ -12,6 +12,8 @@
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
@ -511,7 +513,7 @@ static void sh_sir_tx(struct sh_sir_self *self, int phase)
static int sh_sir_read_data(struct sh_sir_self *self)
{
u16 val;
u16 val = 0;
int timeout = 1024;
while (timeout--) {

2
drivers/net/pcnet32.c
View File

@ -82,7 +82,7 @@ static int cards_found;
/*
* VLB I/O addresses
*/
static unsigned int pcnet32_portlist[] __initdata =
static unsigned int pcnet32_portlist[] =
{ 0x300, 0x320, 0x340, 0x360, 0 };
static int pcnet32_debug;

5
drivers/net/phy/dp83640.c
View File

@ -34,8 +34,7 @@
#define PAGESEL 0x13
#define LAYER4 0x02
#define LAYER2 0x01
#define MAX_RXTS 4
#define MAX_TXTS 4
#define MAX_RXTS 64
#define N_EXT_TS 1
#define PSF_PTPVER 2
#define PSF_EVNT 0x4000
@ -218,7 +217,7 @@ static void phy2rxts(struct phy_rxts *p, struct rxts *rxts)
rxts->seqid = p->seqid;
rxts->msgtype = (p->msgtype >> 12) & 0xf;
rxts->hash = p->msgtype & 0x0fff;
rxts->tmo = jiffies + HZ;
rxts->tmo = jiffies + 2;
}
static u64 phy2txts(struct phy_txts *p)

2
drivers/net/slip.c
View File

@ -367,7 +367,7 @@ static void sl_bump(struct slip *sl)
memcpy(skb_put(skb, count), sl->rbuff, count);
skb_reset_mac_header(skb);
skb->protocol = htons(ETH_P_IP);
netif_rx(skb);
netif_rx_ni(skb);
dev->stats.rx_packets++;
}

1
drivers/net/usb/rtl8150.c
View File

@ -977,7 +977,6 @@ static void rtl8150_disconnect(struct usb_interface *intf)
usb_set_intfdata(intf, NULL);
if (dev) {
set_bit(RTL8150_UNPLUG, &dev->flags);
tasklet_disable(&dev->tl);
tasklet_kill(&dev->tl);
unregister_netdev(dev->netdev);
unlink_all_urbs(dev);

23
drivers/net/wireless/ath/ath5k/base.c
View File

@ -1735,6 +1735,8 @@ ath5k_beacon_setup(struct ath5k_hw *ah, struct ath5k_buf *bf)
if (dma_mapping_error(ah->dev, bf->skbaddr)) {
ATH5K_ERR(ah, "beacon DMA mapping failed\n");
dev_kfree_skb_any(skb);
bf->skb = NULL;
return -EIO;
}
@ -1819,8 +1821,6 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
ath5k_txbuf_free_skb(ah, avf->bbuf);
avf->bbuf->skb = skb;
ret = ath5k_beacon_setup(ah, avf->bbuf);
if (ret)
avf->bbuf->skb = NULL;
out:
return ret;
}
@ -1840,6 +1840,7 @@ ath5k_beacon_send(struct ath5k_hw *ah)
struct ath5k_vif *avf;
struct ath5k_buf *bf;
struct sk_buff *skb;
int err;
ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "in beacon_send\n");
@ -1888,11 +1889,6 @@ ath5k_beacon_send(struct ath5k_hw *ah)
avf = (void *)vif->drv_priv;
bf = avf->bbuf;
if (unlikely(bf->skb == NULL || ah->opmode == NL80211_IFTYPE_STATION ||
ah->opmode == NL80211_IFTYPE_MONITOR)) {
ATH5K_WARN(ah, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
return;
}
/*
* Stop any current dma and put the new frame on the queue.
@ -1906,8 +1902,17 @@ ath5k_beacon_send(struct ath5k_hw *ah)
/* refresh the beacon for AP or MESH mode */
if (ah->opmode == NL80211_IFTYPE_AP ||
ah->opmode == NL80211_IFTYPE_MESH_POINT)
ath5k_beacon_update(ah->hw, vif);
ah->opmode == NL80211_IFTYPE_MESH_POINT) {
err = ath5k_beacon_update(ah->hw, vif);
if (err)
return;
}
if (unlikely(bf->skb == NULL || ah->opmode == NL80211_IFTYPE_STATION ||
ah->opmode == NL80211_IFTYPE_MONITOR)) {
ATH5K_WARN(ah, "bf=%p bf_skb=%p\n", bf, bf->skb);
return;
}
trace_ath5k_tx(ah, bf->skb, &ah->txqs[ah->bhalq]);

8
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
View File

@ -307,7 +307,7 @@ static const struct ar9300_eeprom ar9300_default = {
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
{ { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
@ -884,7 +884,7 @@ static const struct ar9300_eeprom ar9300_x113 = {
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
{ { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
@ -2040,7 +2040,7 @@ static const struct ar9300_eeprom ar9300_x112 = {
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
{ { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
@ -3734,7 +3734,7 @@ static void ar9003_hw_internal_regulator_apply(struct ath_hw *ah)
}
} else {
reg_pmu_set = (5 << 1) | (7 << 4) |
(1 << 8) | (2 << 14) |
(2 << 8) | (2 << 14) |
(6 << 17) | (1 << 20) |
(3 << 24) | (1 << 28);
}

2
drivers/net/wireless/ath/ath9k/ar9003_phy.h
View File

@ -850,7 +850,7 @@
#define AR_PHY_TPC_11_B1 (AR_SM1_BASE + 0x220)
#define AR_PHY_PDADC_TAB_1 (AR_SM1_BASE + 0x240)
#define AR_PHY_TX_IQCAL_STATUS_B1 (AR_SM1_BASE + 0x48c)
#define AR_PHY_TX_IQCAL_CORR_COEFF_B1(_i) (AR_SM_BASE + 0x450 + ((_i) << 2))
#define AR_PHY_TX_IQCAL_CORR_COEFF_B1(_i) (AR_SM1_BASE + 0x450 + ((_i) << 2))
/*
* Channel 2 Register Map

16
drivers/net/wireless/b43/dma.c
View File

@ -795,9 +795,23 @@ static u64 supported_dma_mask(struct b43_wldev *dev)
u32 tmp;
u16 mmio_base;
tmp = b43_read32(dev, SSB_TMSHIGH);
switch (dev->dev->bus_type) {
#ifdef CONFIG_B43_BCMA
case B43_BUS_BCMA:
tmp = bcma_aread32(dev->dev->bdev, BCMA_IOST);
if (tmp & BCMA_IOST_DMA64)
return DMA_BIT_MASK(64);
break;
#endif
#ifdef CONFIG_B43_SSB
case B43_BUS_SSB:
tmp = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
if (tmp & SSB_TMSHIGH_DMA64)
return DMA_BIT_MASK(64);
break;
#endif
}
mmio_base = b43_dmacontroller_base(0, 0);
b43_write32(dev, mmio_base + B43_DMA32_TXCTL, B43_DMA32_TXADDREXT_MASK);
tmp = b43_read32(dev, mmio_base + B43_DMA32_TXCTL);

2
drivers/net/wireless/rt2x00/rt2800usb.c
View File

@ -921,6 +921,8 @@ static struct usb_device_id rt2800usb_device_table[] = {
{ USB_DEVICE(0x07d1, 0x3c16) },
/* Draytek */
{ USB_DEVICE(0x07fa, 0x7712) },
/* DVICO */
{ USB_DEVICE(0x0fe9, 0xb307) },
/* Edimax */
{ USB_DEVICE(0x7392, 0x7711) },
{ USB_DEVICE(0x7392, 0x7717) },

1
drivers/net/wireless/rt2x00/rt73usb.c
View File

@ -2420,6 +2420,7 @@ static struct usb_device_id rt73usb_device_table[] = {
/* Buffalo */
{ USB_DEVICE(0x0411, 0x00d8) },
{ USB_DEVICE(0x0411, 0x00d9) },
{ USB_DEVICE(0x0411, 0x00e6) },
{ USB_DEVICE(0x0411, 0x00f4) },
{ USB_DEVICE(0x0411, 0x0116) },
{ USB_DEVICE(0x0411, 0x0119) },

11
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
View File

@ -281,6 +281,8 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817d, rtl92cu_hal_cfg)},
/* 8188CE-VAU USB minCard (b/g mode only) */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817e, rtl92cu_hal_cfg)},
/* 8188RU in Alfa AWUS036NHR */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817f, rtl92cu_hal_cfg)},
/* 8188 Combo for BC4 */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8754, rtl92cu_hal_cfg)},
@ -303,20 +305,23 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
/* HP - Lite-On ,8188CUS Slim Combo */
{RTL_USB_DEVICE(0x103c, 0x1629, rtl92cu_hal_cfg)},
{RTL_USB_DEVICE(0x13d3, 0x3357, rtl92cu_hal_cfg)}, /* AzureWave */
{RTL_USB_DEVICE(0x2001, 0x3308, rtl92cu_hal_cfg)}, /*D-Link - Alpha*/
{RTL_USB_DEVICE(0x2019, 0xab2a, rtl92cu_hal_cfg)}, /*Planex - Abocom*/
{RTL_USB_DEVICE(0x2019, 0xed17, rtl92cu_hal_cfg)}, /*PCI - Edimax*/
{RTL_USB_DEVICE(0x20f4, 0x648b, rtl92cu_hal_cfg)}, /*TRENDnet - Cameo*/
{RTL_USB_DEVICE(0x7392, 0x7811, rtl92cu_hal_cfg)}, /*Edimax - Edimax*/
{RTL_USB_DEVICE(0x3358, 0x13d3, rtl92cu_hal_cfg)}, /*Azwave 8188CE-VAU*/
{RTL_USB_DEVICE(0x13d3, 0x3358, rtl92cu_hal_cfg)}, /*Azwave 8188CE-VAU*/
/* Russian customer -Azwave (8188CE-VAU b/g mode only) */
{RTL_USB_DEVICE(0x3359, 0x13d3, rtl92cu_hal_cfg)},
{RTL_USB_DEVICE(0x13d3, 0x3359, rtl92cu_hal_cfg)},
{RTL_USB_DEVICE(0x4855, 0x0090, rtl92cu_hal_cfg)}, /* Feixun */
{RTL_USB_DEVICE(0x4855, 0x0091, rtl92cu_hal_cfg)}, /* NetweeN-Feixun */
{RTL_USB_DEVICE(0x9846, 0x9041, rtl92cu_hal_cfg)}, /* Netgear Cameo */
/****** 8192CU ********/
{RTL_USB_DEVICE(0x0586, 0x341f, rtl92cu_hal_cfg)}, /*Zyxel -Abocom*/
{RTL_USB_DEVICE(0x07aa, 0x0056, rtl92cu_hal_cfg)}, /*ATKK-Gemtek*/
{RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/
{RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Abocom -Abocom*/
{RTL_USB_DEVICE(0x2001, 0x3307, rtl92cu_hal_cfg)}, /*D-Link-Cameo*/
{RTL_USB_DEVICE(0x2001, 0x3309, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/
{RTL_USB_DEVICE(0x2001, 0x330a, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/

6
drivers/net/wireless/wl1251/acx.c
View File

@ -140,8 +140,6 @@ int wl1251_acx_sleep_auth(struct wl1251 *wl, u8 sleep_auth)
auth->sleep_auth = sleep_auth;
ret = wl1251_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth));
if (ret < 0)
return ret;
out:
kfree(auth);
@ -681,10 +679,8 @@ int wl1251_acx_cca_threshold(struct wl1251 *wl)
ret = wl1251_cmd_configure(wl, ACX_CCA_THRESHOLD,
detection, sizeof(*detection));
if (ret < 0) {
if (ret < 0)
wl1251_warning("failed to set cca threshold: %d", ret);
return ret;
}
out:
kfree(detection);

2
drivers/net/wireless/wl1251/cmd.c
View File

@ -241,7 +241,7 @@ int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable)
if (ret < 0) {
wl1251_error("tx %s cmd for channel %d failed",
enable ? "start" : "stop", channel);
return ret;
goto out;
}
wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d",

1
fs/compat_ioctl.c
View File

@ -1003,6 +1003,7 @@ COMPATIBLE_IOCTL(PPPIOCCONNECT)
COMPATIBLE_IOCTL(PPPIOCDISCONN)
COMPATIBLE_IOCTL(PPPIOCATTCHAN)
COMPATIBLE_IOCTL(PPPIOCGCHAN)
COMPATIBLE_IOCTL(PPPIOCGL2TPSTATS)
/* PPPOX */
COMPATIBLE_IOCTL(PPPOEIOCSFWD)
COMPATIBLE_IOCTL(PPPOEIOCDFWD)

2
include/linux/netlink.h
View File

@ -29,7 +29,7 @@
#define MAX_LINKS 32
struct sockaddr_nl {
sa_family_t nl_family; /* AF_NETLINK */
__kernel_sa_family_t nl_family; /* AF_NETLINK */
unsigned short nl_pad; /* zero */
__u32 nl_pid; /* port ID */
__u32 nl_groups; /* multicast groups mask */

6
include/linux/socket.h
View File

@ -8,8 +8,10 @@
#define _K_SS_ALIGNSIZE (__alignof__ (struct sockaddr *))
/* Implementation specific desired alignment */
typedef unsigned short __kernel_sa_family_t;
struct __kernel_sockaddr_storage {
unsigned short ss_family; /* address family */
__kernel_sa_family_t ss_family; /* address family */
/* Following field(s) are implementation specific */
char __data[_K_SS_MAXSIZE - sizeof(unsigned short)];
/* space to achieve desired size, */
@ -35,7 +37,7 @@ struct seq_file;
extern void socket_seq_show(struct seq_file *seq);
#endif
typedef unsigned short sa_family_t;
typedef __kernel_sa_family_t sa_family_t;
/*
* 1003.1g requires sa_family_t and that sa_data is char.

2
include/net/inet_sock.h
View File

@ -238,7 +238,7 @@ static inline __u8 inet_sk_flowi_flags(const struct sock *sk)
{
__u8 flags = 0;
if (inet_sk(sk)->transparent)
if (inet_sk(sk)->transparent || inet_sk(sk)->hdrincl)
flags |= FLOWI_FLAG_ANYSRC;
if (sk->sk_protocol == IPPROTO_TCP)
flags |= FLOWI_FLAG_PRECOW_METRICS;

6
net/bridge/br_if.c
View File

@ -417,6 +417,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev)
int br_del_if(struct net_bridge *br, struct net_device *dev)
{
struct net_bridge_port *p;
bool changed_addr;
p = br_port_get_rtnl(dev);
if (!p || p->br != br)
@ -425,9 +426,12 @@ int br_del_if(struct net_bridge *br, struct net_device *dev)
del_nbp(p);
spin_lock_bh(&br->lock);
br_stp_recalculate_bridge_id(br);
changed_addr = br_stp_recalculate_bridge_id(br);
spin_unlock_bh(&br->lock);
if (changed_addr)
call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);
netdev_update_features(br->dev);
return 0;

7
net/bridge/br_notify.c
View File

@ -34,6 +34,7 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v
struct net_device *dev = ptr;
struct net_bridge_port *p;
struct net_bridge *br;
bool changed_addr;
int err;
/* register of bridge completed, add sysfs entries */
@ -57,8 +58,12 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v
case NETDEV_CHANGEADDR:
spin_lock_bh(&br->lock);
br_fdb_changeaddr(p, dev->dev_addr);
br_stp_recalculate_bridge_id(br);
changed_addr = br_stp_recalculate_bridge_id(br);
spin_unlock_bh(&br->lock);
if (changed_addr)
call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);
break;
case NETDEV_CHANGE:

3
net/bridge/netfilter/ebtables.c
View File

@ -1198,7 +1198,8 @@ ebt_register_table(struct net *net, const struct ebt_table *input_table)
if (table->check && table->check(newinfo, table->valid_hooks)) {
BUGPRINT("The table doesn't like its own initial data, lol\n");
return ERR_PTR(-EINVAL);
ret = -EINVAL;
goto free_chainstack;
}
table->private = newinfo;

2
net/core/scm.c
View File

@ -192,7 +192,7 @@ int __scm_send(struct socket *sock, struct msghdr *msg, struct scm_cookie *p)
goto error;
cred->uid = cred->euid = p->creds.uid;
cred->gid = cred->egid = p->creds.uid;
cred->gid = cred->egid = p->creds.gid;
put_cred(p->cred);
p->cred = cred;
}

1
net/ipv4/ip_output.c
View File

@ -122,6 +122,7 @@ static int ip_dev_loopback_xmit(struct sk_buff *newskb)
newskb->pkt_type = PACKET_LOOPBACK;
newskb->ip_summed = CHECKSUM_UNNECESSARY;
WARN_ON(!skb_dst(newskb));
skb_dst_force(newskb);
netif_rx_ni(newskb);
return 0;
}

9
net/ipv4/ip_sockglue.c
View File

@ -1067,7 +1067,7 @@ EXPORT_SYMBOL(compat_ip_setsockopt);
*/
static int do_ip_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen)
char __user *optval, int __user *optlen, unsigned flags)
{
struct inet_sock *inet = inet_sk(sk);
int val;
@ -1240,7 +1240,7 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname,
msg.msg_control = optval;
msg.msg_controllen = len;
msg.msg_flags = 0;
msg.msg_flags = flags;
if (inet->cmsg_flags & IP_CMSG_PKTINFO) {
struct in_pktinfo info;
@ -1294,7 +1294,7 @@ int ip_getsockopt(struct sock *sk, int level,
{
int err;
err = do_ip_getsockopt(sk, level, optname, optval, optlen);
err = do_ip_getsockopt(sk, level, optname, optval, optlen, 0);
#ifdef CONFIG_NETFILTER
/* we need to exclude all possible ENOPROTOOPTs except default case */
if (err == -ENOPROTOOPT && optname != IP_PKTOPTIONS &&
@ -1327,7 +1327,8 @@ int compat_ip_getsockopt(struct sock *sk, int level, int optname,
return compat_mc_getsockopt(sk, level, optname, optval, optlen,
ip_getsockopt);
err = do_ip_getsockopt(sk, level, optname, optval, optlen);
err = do_ip_getsockopt(sk, level, optname, optval, optlen,
MSG_CMSG_COMPAT);
#ifdef CONFIG_NETFILTER
/* we need to exclude all possible ENOPROTOOPTs except default case */

6
net/ipv4/netfilter.c
View File

@ -18,17 +18,15 @@ int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type)
struct rtable *rt;
struct flowi4 fl4 = {};
__be32 saddr = iph->saddr;
__u8 flags = 0;
__u8 flags = skb->sk ? inet_sk_flowi_flags(skb->sk) : 0;
unsigned int hh_len;
if (!skb->sk && addr_type != RTN_LOCAL) {
if (addr_type == RTN_UNSPEC)
addr_type = inet_addr_type(net, saddr);
if (addr_type == RTN_LOCAL || addr_type == RTN_UNICAST)
flags |= FLOWI_FLAG_ANYSRC;
else
saddr = 0;
}
/* some non-standard hacks like ipt_REJECT.c:send_reset() can cause
* packets with foreign saddr to appear on the NF_INET_LOCAL_OUT hook.
@ -38,7 +36,7 @@ int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type)
fl4.flowi4_tos = RT_TOS(iph->tos);
fl4.flowi4_oif = skb->sk ? skb->sk->sk_bound_dev_if : 0;
fl4.flowi4_mark = skb->mark;
fl4.flowi4_flags = skb->sk ? inet_sk_flowi_flags(skb->sk) : flags;
fl4.flowi4_flags = flags;
rt = ip_route_output_key(net, &fl4);
if (IS_ERR(rt))
return -1;

3
net/ipv4/raw.c
View File

@ -563,7 +563,8 @@ static int raw_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
flowi4_init_output(&fl4, ipc.oif, sk->sk_mark, tos,
RT_SCOPE_UNIVERSE,
inet->hdrincl ? IPPROTO_RAW : sk->sk_protocol,
FLOWI_FLAG_CAN_SLEEP, daddr, saddr, 0, 0);
inet_sk_flowi_flags(sk) | FLOWI_FLAG_CAN_SLEEP,
daddr, saddr, 0, 0);
if (!inet->hdrincl) {
err = raw_probe_proto_opt(&fl4, msg);

9
net/ipv4/route.c
View File

@ -722,7 +722,7 @@ static inline bool compare_hash_inputs(const struct rtable *rt1,
{
return ((((__force u32)rt1->rt_key_dst ^ (__force u32)rt2->rt_key_dst) |
((__force u32)rt1->rt_key_src ^ (__force u32)rt2->rt_key_src) |
(rt1->rt_iif ^ rt2->rt_iif)) == 0);
(rt1->rt_route_iif ^ rt2->rt_route_iif)) == 0);
}
static inline int compare_keys(struct rtable *rt1, struct rtable *rt2)
@ -731,8 +731,8 @@ static inline int compare_keys(struct rtable *rt1, struct rtable *rt2)
((__force u32)rt1->rt_key_src ^ (__force u32)rt2->rt_key_src) |
(rt1->rt_mark ^ rt2->rt_mark) |
(rt1->rt_key_tos ^ rt2->rt_key_tos) |
(rt1->rt_oif ^ rt2->rt_oif) |
(rt1->rt_iif ^ rt2->rt_iif)) == 0;
(rt1->rt_route_iif ^ rt2->rt_route_iif) |
(rt1->rt_oif ^ rt2->rt_oif)) == 0;
}
static inline int compare_netns(struct rtable *rt1, struct rtable *rt2)
@ -2320,8 +2320,7 @@ int ip_route_input_common(struct sk_buff *skb, __be32 daddr, __be32 saddr,
rth = rcu_dereference(rth->dst.rt_next)) {
if ((((__force u32)rth->rt_key_dst ^ (__force u32)daddr) |
((__force u32)rth->rt_key_src ^ (__force u32)saddr) |
(rth->rt_iif ^ iif) |
rth->rt_oif |
(rth->rt_route_iif ^ iif) |
(rth->rt_key_tos ^ tos)) == 0 &&
rth->rt_mark == skb->mark &&
net_eq(dev_net(rth->dst.dev), net) &&

2
net/ipv4/syncookies.c
View File

@ -276,7 +276,7 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb,
int mss;
struct rtable *rt;
__u8 rcv_wscale;
bool ecn_ok;
bool ecn_ok = false;
if (!sysctl_tcp_syncookies || !th->ack || th->rst)
goto out;

2
net/ipv6/syncookies.c
View File

@ -165,7 +165,7 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
int mss;
struct dst_entry *dst;
__u8 rcv_wscale;
bool ecn_ok;
bool ecn_ok = false;
if (!sysctl_tcp_syncookies || !th->ack || th->rst)
goto out;

1
net/netfilter/nf_queue.c
View File

@ -312,6 +312,7 @@ void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict)
}
break;
case NF_STOLEN:
break;
default:
kfree_skb(skb);
}

22
net/netlabel/netlabel_kapi.c
View File

@ -341,11 +341,11 @@ int netlbl_cfg_cipsov4_map_add(u32 doi,
entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
if (entry == NULL)
return -ENOMEM;
goto out_entry;
if (domain != NULL) {
entry->domain = kstrdup(domain, GFP_ATOMIC);
if (entry->domain == NULL)
goto cfg_cipsov4_map_add_failure;
goto out_domain;
}
if (addr == NULL && mask == NULL) {
@ -354,13 +354,13 @@ int netlbl_cfg_cipsov4_map_add(u32 doi,
} else if (addr != NULL && mask != NULL) {
addrmap = kzalloc(sizeof(*addrmap), GFP_ATOMIC);
if (addrmap == NULL)
goto cfg_cipsov4_map_add_failure;
goto out_addrmap;
INIT_LIST_HEAD(&addrmap->list4);
INIT_LIST_HEAD(&addrmap->list6);
addrinfo = kzalloc(sizeof(*addrinfo), GFP_ATOMIC);
if (addrinfo == NULL)
goto cfg_cipsov4_map_add_failure;
goto out_addrinfo;
addrinfo->type_def.cipsov4 = doi_def;
addrinfo->type = NETLBL_NLTYPE_CIPSOV4;
addrinfo->list.addr = addr->s_addr & mask->s_addr;
@ -374,7 +374,7 @@ int netlbl_cfg_cipsov4_map_add(u32 doi,
entry->type = NETLBL_NLTYPE_ADDRSELECT;
} else {
ret_val = -EINVAL;
goto cfg_cipsov4_map_add_failure;
goto out_addrmap;
}
ret_val = netlbl_domhsh_add(entry, audit_info);
@ -384,11 +384,15 @@ int netlbl_cfg_cipsov4_map_add(u32 doi,
return 0;
cfg_cipsov4_map_add_failure:
cipso_v4_doi_putdef(doi_def);
kfree(entry->domain);
kfree(entry);
kfree(addrmap);
kfree(addrinfo);
out_addrinfo:
kfree(addrmap);
out_addrmap:
kfree(entry->domain);
out_domain:
kfree(entry);
out_entry:
cipso_v4_doi_putdef(doi_def);
return ret_val;
}

2
net/sched/sch_prio.c
View File

@ -112,7 +112,7 @@ static struct sk_buff *prio_dequeue(struct Qdisc *sch)
for (prio = 0; prio < q->bands; prio++) {
struct Qdisc *qdisc = q->queues[prio];
struct sk_buff *skb = qdisc->dequeue(qdisc);
struct sk_buff *skb = qdisc_dequeue_peeked(qdisc);
if (skb) {
qdisc_bstats_update(sch, skb);
sch->q.qlen--;