mirror of https://gitee.com/openkylin/linux.git
NFC: trf7970a: Don't assume CONFIG_PM_RUNTIME is enabled
The current code assumes that CONFIG_PM_RUNTIME is always defined so it won't power up the trf7970a when it isn't enabled. Fix this by moving the power up/down code from the pm_runtime_resume/suspend routines into their own routines and calling the power up function from the probe routine. This ensures the device is powered up even when CONFIG_PM_RUNTIME is not defined. In order to not power on/off a device that is already powered on/off, create a new state to indicate that the power is off (TRF7970A_ST_PWR_OFF). Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Mark A. Greer
Samuel Ortiz
parent
b5e17d9b5b
commit
ceccd6aa50
|
|
@ -332,6 +332,7 @@
|
|||
(ISO15693_REQ_FLAG_SUB_CARRIER | ISO15693_REQ_FLAG_DATA_RATE)
|
||||
|
||||
enum trf7970a_state {
|
||||
TRF7970A_ST_PWR_OFF,
|
||||
TRF7970A_ST_RF_OFF,
|
||||
TRF7970A_ST_IDLE,
|
||||
TRF7970A_ST_IDLE_RX_BLOCKED,
|
||||
|
|
@ -877,6 +878,12 @@ static int trf7970a_switch_rf_on(struct trf7970a *trf)
|
|||
|
||||
pm_runtime_get_sync(trf->dev);
|
||||
|
||||
if (trf->state != TRF7970A_ST_RF_OFF) { /* Power on, RF off */
|
||||
dev_err(trf->dev, "%s - Incorrect state: %d\n", __func__,
|
||||
trf->state);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = trf7970a_init(trf);
|
||||
if (ret) {
|
||||
dev_err(trf->dev, "%s - Can't initialize: %d\n", __func__, ret);
|
||||
|
|
@ -899,6 +906,7 @@ static int trf7970a_switch_rf(struct nfc_digital_dev *ddev, bool on)
|
|||
|
||||
if (on) {
|
||||
switch (trf->state) {
|
||||
case TRF7970A_ST_PWR_OFF:
|
||||
case TRF7970A_ST_RF_OFF:
|
||||
ret = trf7970a_switch_rf_on(trf);
|
||||
break;
|
||||
|
|
@ -913,6 +921,7 @@ static int trf7970a_switch_rf(struct nfc_digital_dev *ddev, bool on)
|
|||
}
|
||||
} else {
|
||||
switch (trf->state) {
|
||||
case TRF7970A_ST_PWR_OFF:
|
||||
case TRF7970A_ST_RF_OFF:
|
||||
break;
|
||||
default:
|
||||
|
|
@ -1045,7 +1054,8 @@ static int trf7970a_in_configure_hw(struct nfc_digital_dev *ddev, int type,
|
|||
|
||||
mutex_lock(&trf->lock);
|
||||
|
||||
if (trf->state == TRF7970A_ST_RF_OFF) {
|
||||
if ((trf->state == TRF7970A_ST_PWR_OFF) ||
|
||||
(trf->state == TRF7970A_ST_RF_OFF)) {
|
||||
ret = trf7970a_switch_rf_on(trf);
|
||||
if (ret)
|
||||
goto err_unlock;
|
||||
|
|
@ -1316,6 +1326,65 @@ static struct nfc_digital_ops trf7970a_nfc_ops = {
|
|||
.abort_cmd = trf7970a_abort_cmd,
|
||||
};
|
||||
|
||||
static int trf7970a_power_up(struct trf7970a *trf)
|
||||
{
|
||||
int ret;
|
||||
|
||||
dev_dbg(trf->dev, "Powering up - state: %d\n", trf->state);
|
||||
|
||||
if (trf->state != TRF7970A_ST_PWR_OFF)
|
||||
return 0;
|
||||
|
||||
ret = regulator_enable(trf->regulator);
|
||||
if (ret) {
|
||||
dev_err(trf->dev, "%s - Can't enable VIN: %d\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
usleep_range(5000, 6000);
|
||||
|
||||
if (!(trf->quirks & TRF7970A_QUIRK_EN2_MUST_STAY_LOW)) {
|
||||
gpio_set_value(trf->en2_gpio, 1);
|
||||
usleep_range(1000, 2000);
|
||||
}
|
||||
|
||||
gpio_set_value(trf->en_gpio, 1);
|
||||
|
||||
usleep_range(20000, 21000);
|
||||
|
||||
trf->state = TRF7970A_ST_RF_OFF;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int trf7970a_power_down(struct trf7970a *trf)
|
||||
{
|
||||
int ret;
|
||||
|
||||
dev_dbg(trf->dev, "Powering down - state: %d\n", trf->state);
|
||||
|
||||
if (trf->state == TRF7970A_ST_PWR_OFF)
|
||||
return 0;
|
||||
|
||||
if (trf->state != TRF7970A_ST_RF_OFF) {
|
||||
dev_dbg(trf->dev, "Can't power down - not RF_OFF state (%d)\n",
|
||||
trf->state);
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
gpio_set_value(trf->en_gpio, 0);
|
||||
gpio_set_value(trf->en2_gpio, 0);
|
||||
|
||||
ret = regulator_disable(trf->regulator);
|
||||
if (ret)
|
||||
dev_err(trf->dev, "%s - Can't disable VIN: %d\n", __func__,
|
||||
ret);
|
||||
|
||||
trf->state = TRF7970A_ST_PWR_OFF;
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int trf7970a_get_autosuspend_delay(struct device_node *np)
|
||||
{
|
||||
int autosuspend_delay, ret;
|
||||
|
|
@ -1348,7 +1417,7 @@ static int trf7970a_probe(struct spi_device *spi)
|
|||
if (!trf)
|
||||
return -ENOMEM;
|
||||
|
||||
trf->state = TRF7970A_ST_RF_OFF;
|
||||
trf->state = TRF7970A_ST_PWR_OFF;
|
||||
trf->dev = &spi->dev;
|
||||
trf->spi = spi;
|
||||
|
||||
|
|
@ -1442,19 +1511,29 @@ static int trf7970a_probe(struct spi_device *spi)
|
|||
|
||||
pm_runtime_set_autosuspend_delay(trf->dev, autosuspend_delay);
|
||||
pm_runtime_use_autosuspend(trf->dev);
|
||||
|
||||
ret = trf7970a_power_up(trf);
|
||||
if (ret)
|
||||
goto err_free_ddev;
|
||||
|
||||
pm_runtime_set_active(trf->dev);
|
||||
pm_runtime_enable(trf->dev);
|
||||
pm_runtime_mark_last_busy(trf->dev);
|
||||
|
||||
ret = nfc_digital_register_device(trf->ddev);
|
||||
if (ret) {
|
||||
dev_err(trf->dev, "Can't register NFC digital device: %d\n",
|
||||
ret);
|
||||
goto err_free_ddev;
|
||||
goto err_power_down;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
err_free_ddev:
|
||||
err_power_down:
|
||||
pm_runtime_disable(trf->dev);
|
||||
pm_runtime_set_suspended(trf->dev);
|
||||
trf7970a_power_down(trf);
|
||||
err_free_ddev:
|
||||
nfc_digital_free_device(trf->ddev);
|
||||
err_disable_regulator:
|
||||
regulator_disable(trf->regulator);
|
||||
|
|
@ -1478,15 +1557,18 @@ static int trf7970a_remove(struct spi_device *spi)
|
|||
/* FALLTHROUGH */
|
||||
case TRF7970A_ST_IDLE:
|
||||
case TRF7970A_ST_IDLE_RX_BLOCKED:
|
||||
pm_runtime_put_sync(trf->dev);
|
||||
trf7970a_switch_rf_off(trf);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
mutex_unlock(&trf->lock);
|
||||
|
||||
pm_runtime_disable(trf->dev);
|
||||
pm_runtime_set_suspended(trf->dev);
|
||||
|
||||
trf7970a_power_down(trf);
|
||||
|
||||
mutex_unlock(&trf->lock);
|
||||
|
||||
nfc_digital_unregister_device(trf->ddev);
|
||||
nfc_digital_free_device(trf->ddev);
|
||||
|
|
@ -1507,18 +1589,11 @@ static int trf7970a_pm_runtime_suspend(struct device *dev)
|
|||
|
||||
dev_dbg(dev, "Runtime suspend\n");
|
||||
|
||||
if (trf->state != TRF7970A_ST_RF_OFF) {
|
||||
dev_dbg(dev, "Can't suspend - not in OFF state (%d)\n",
|
||||
trf->state);
|
||||
return -EBUSY;
|
||||
}
|
||||
mutex_lock(&trf->lock);
|
||||
|
||||
gpio_set_value(trf->en_gpio, 0);
|
||||
gpio_set_value(trf->en2_gpio, 0);
|
||||
ret = trf7970a_power_down(trf);
|
||||
|
||||
ret = regulator_disable(trf->regulator);
|
||||
if (ret)
|
||||
dev_err(dev, "%s - Can't disable VIN: %d\n", __func__, ret);
|
||||
mutex_unlock(&trf->lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
|
@ -1531,26 +1606,11 @@ static int trf7970a_pm_runtime_resume(struct device *dev)
|
|||
|
||||
dev_dbg(dev, "Runtime resume\n");
|
||||
|
||||
ret = regulator_enable(trf->regulator);
|
||||
if (ret) {
|
||||
dev_err(dev, "%s - Can't enable VIN: %d\n", __func__, ret);
|
||||
return ret;
|
||||
}
|
||||
ret = trf7970a_power_up(trf);
|
||||
if (!ret)
|
||||
pm_runtime_mark_last_busy(dev);
|
||||
|
||||
usleep_range(5000, 6000);
|
||||
|
||||
if (!(trf->quirks & TRF7970A_QUIRK_EN2_MUST_STAY_LOW)) {
|
||||
gpio_set_value(trf->en2_gpio, 1);
|
||||
usleep_range(1000, 2000);
|
||||
}
|
||||
|
||||
gpio_set_value(trf->en_gpio, 1);
|
||||
|
||||
usleep_range(20000, 21000);
|
||||
|
||||
pm_runtime_mark_last_busy(dev);
|
||||
|
||||
return 0;
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue