diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 1cf2b3829772..87df3c634c43 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -455,6 +455,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-pico-hobbit.dtb \ imx6dl-pico-nymph.dtb \ imx6dl-pico-pi.dtb \ + imx6dl-prtrvt.dtb \ + imx6dl-prtvt7.dtb \ imx6dl-rex-basic.dtb \ imx6dl-riotboard.dtb \ imx6dl-sabreauto.dtb \ @@ -543,6 +545,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-pico-nymph.dtb \ imx6q-pico-pi.dtb \ imx6q-pistachio.dtb \ + imx6q-prti6q.dtb \ + imx6q-prtwd2.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ @@ -592,6 +596,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sdb-reva.dtb \ imx6sx-sdb-sai.dtb \ imx6sx-sdb.dtb \ + imx6sx-sdb-mqs.dtb \ imx6sx-softing-vining-2000.dtb \ imx6sx-udoo-neo-basic.dtb \ imx6sx-udoo-neo-extended.dtb \ @@ -617,6 +622,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-14x14-evk.dtb \ imx6ull-colibri-eval-v3.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ + imx6ull-myir-mys-6ulx-eval.dtb \ imx6ull-opos6uldev.dtb \ imx6ull-phytec-segin-ff-rdk-nand.dtb \ imx6ull-phytec-segin-ff-rdk-emmc.dtb \ diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi index b30448cde582..9b940987864c 100644 --- a/arch/arm/boot/dts/imx1.dtsi +++ b/arch/arm/boot/dts/imx1.dtsi @@ -125,7 +125,7 @@ uart2: serial@207000 { }; pwm: pwm@208000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx1-pwm"; reg = <0x00208000 0x1000>; interrupts = <34>; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index c5edff381213..18289f6fb1f3 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -442,7 +442,7 @@ pxp@8002a000 { status = "disabled"; }; - ocotp@8002c000 { + efuse@8002c000 { compatible = "fsl,imx23-ocotp", "fsl,ocotp"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 1123e683025c..1ab19f1268f8 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -411,7 +411,7 @@ gpio4: gpio@53f9c000 { pwm2: pwm@53fa0000 { compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; - #pwm-cells = <2>; + #pwm-cells = <3>; reg = <0x53fa0000 0x4000>; clocks = <&clks 106>, <&clks 52>; clock-names = "ipg", "per"; @@ -430,7 +430,7 @@ gpio3: gpio@53fa4000 { pwm3: pwm@53fa8000 { compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; - #pwm-cells = <2>; + #pwm-cells = <3>; reg = <0x53fa8000 0x4000>; clocks = <&clks 107>, <&clks 52>; clock-names = "ipg", "per"; @@ -453,7 +453,7 @@ rngb: rngb@53fb0000 { interrupts = <22>; }; - esdhc1: esdhc@53fb4000 { + esdhc1: mmc@53fb4000 { compatible = "fsl,imx25-esdhc"; reg = <0x53fb4000 0x4000>; interrupts = <9>; @@ -462,7 +462,7 @@ esdhc1: esdhc@53fb4000 { status = "disabled"; }; - esdhc2: esdhc@53fb8000 { + esdhc2: mmc@53fb8000 { compatible = "fsl,imx25-esdhc"; reg = <0x53fb8000 0x4000>; interrupts = <8>; @@ -488,7 +488,7 @@ slcdc@53fc0000 { pwm4: pwm@53fc8000 { compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; - #pwm-cells = <2>; + #pwm-cells = <3>; reg = <0x53fc8000 0x4000>; clocks = <&clks 108>, <&clks 52>; clock-names = "ipg", "per"; @@ -535,14 +535,14 @@ wdog@53fdc000 { pwm1: pwm@53fe0000 { compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; - #pwm-cells = <2>; + #pwm-cells = <3>; reg = <0x53fe0000 0x4000>; clocks = <&clks 105>, <&clks 52>; clock-names = "ipg", "per"; interrupts = <26>; }; - iim: iim@53ff0000 { + iim: efuse@53ff0000 { compatible = "fsl,imx25-iim", "fsl,imx27-iim"; reg = <0x53ff0000 0x4000>; interrupts = <19>; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 002cd223f22d..fc0b318f8733 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -134,7 +134,7 @@ gpt3: timer@10005000 { }; pwm: pwm@10006000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx27-pwm"; reg = <0x10006000 0x1000>; interrupts = <23>; @@ -265,7 +265,7 @@ i2c1: i2c@10012000 { status = "disabled"; }; - sdhci1: sdhci@10013000 { + sdhci1: mmc@10013000 { compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x10013000 0x1000>; interrupts = <11>; @@ -277,7 +277,7 @@ sdhci1: sdhci@10013000 { status = "disabled"; }; - sdhci2: sdhci@10014000 { + sdhci2: mmc@10014000 { compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x10014000 0x1000>; interrupts = <10>; @@ -431,7 +431,7 @@ i2c2: i2c@1001d000 { status = "disabled"; }; - sdhci3: sdhci@1001e000 { + sdhci3: mmc@1001e000 { compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x1001e000 0x1000>; interrupts = <9>; @@ -540,7 +540,7 @@ clks: ccm@10027000{ #clock-cells = <1>; }; - iim: iim@10028000 { + iim: efuse@10028000 { compatible = "fsl,imx27-iim"; reg = <0x10028000 0x1000>; interrupts = <62>; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index a1cbbeb39a4f..a2b799c56f8f 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -1011,7 +1011,7 @@ pxp: pxp@8002a000 { status = "disabled"; }; - ocotp: ocotp@8002c000 { + ocotp: efuse@8002c000 { compatible = "fsl,imx28-ocotp", "fsl,ocotp"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 18270ec648fe..45333f7e10ea 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -173,7 +173,7 @@ spba@50000000 { reg = <0x50000000 0x100000>; ranges; - sdhci1: sdhci@50004000 { + sdhci1: mmc@50004000 { compatible = "fsl,imx31-mmc"; reg = <0x50004000 0x4000>; interrupts = <9>; @@ -184,7 +184,7 @@ sdhci1: sdhci@50004000 { status = "disabled"; }; - sdhci2: sdhci@50008000 { + sdhci2: mmc@50008000 { compatible = "fsl,imx31-mmc"; reg = <0x50008000 0x4000>; interrupts = <8>; @@ -217,7 +217,7 @@ spi2: spi@50010000 { status = "disabled"; }; - iim: iim@5001c000 { + iim: efuse@5001c000 { compatible = "fsl,imx31-iim", "fsl,imx27-iim"; reg = <0x5001c000 0x1000>; interrupts = <19>; @@ -327,7 +327,7 @@ pwm: pwm@53fe0000 { interrupts = <26>; clocks = <&clks 10>, <&clks 42>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 2ebf2c1fa682..aba16252faab 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -59,7 +59,7 @@ soc { interrupt-parent = <&avic>; ranges; - L2: l2-cache@30000000 { + L2: cache-controller@30000000 { compatible = "arm,l210-cache"; reg = <0x30000000 0x1000>; cache-unified; @@ -231,7 +231,7 @@ gpio3: gpio@53fa4000 { #interrupt-cells = <2>; }; - esdhc1: esdhc@53fb4000 { + esdhc1: mmc@53fb4000 { compatible = "fsl,imx35-esdhc"; reg = <0x53fb4000 0x4000>; interrupts = <7>; @@ -240,7 +240,7 @@ esdhc1: esdhc@53fb4000 { status = "disabled"; }; - esdhc2: esdhc@53fb8000 { + esdhc2: mmc@53fb8000 { compatible = "fsl,imx35-esdhc"; reg = <0x53fb8000 0x4000>; interrupts = <8>; @@ -249,7 +249,7 @@ esdhc2: esdhc@53fb8000 { status = "disabled"; }; - esdhc3: esdhc@53fbc000 { + esdhc3: mmc@53fbc000 { compatible = "fsl,imx35-esdhc"; reg = <0x53fbc000 0x4000>; interrupts = <9>; @@ -320,7 +320,7 @@ can2: can@53fe8000 { status = "disabled"; }; - iim@53ff0000 { + efuse@53ff0000 { compatible = "fsl,imx35-iim"; reg = <0x53ff0000 0x4000>; interrupts = <19>; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 1f4ecbca5225..b6b2e6af9b96 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -115,7 +115,7 @@ spba@50000000 { reg = <0x50000000 0x40000>; ranges; - esdhc1: esdhc@50004000 { + esdhc1: mmc@50004000 { compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc"; reg = <0x50004000 0x4000>; interrupts = <1>; @@ -127,7 +127,7 @@ esdhc1: esdhc@50004000 { status = "disabled"; }; - esdhc2: esdhc@50008000 { + esdhc2: mmc@50008000 { compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc"; reg = <0x50008000 0x4000>; interrupts = <2>; @@ -176,7 +176,7 @@ ssi2: ssi@50014000 { status = "disabled"; }; - esdhc3: esdhc@50020000 { + esdhc3: mmc@50020000 { compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc"; reg = <0x50020000 0x4000>; interrupts = <3>; @@ -188,7 +188,7 @@ esdhc3: esdhc@50020000 { status = "disabled"; }; - esdhc4: esdhc@50024000 { + esdhc4: mmc@50024000 { compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc"; reg = <0x50024000 0x4000>; interrupts = <4>; @@ -289,7 +289,7 @@ iomuxc: iomuxc@53fa8000 { }; pwm1: pwm@53fb4000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; reg = <0x53fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, @@ -299,7 +299,7 @@ pwm1: pwm@53fb4000 { }; pwm2: pwm@53fb8000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; reg = <0x53fb8000 0x4000>; clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts index 4344632f7940..6ecb83e7f336 100644 --- a/arch/arm/boot/dts/imx51-ts4800.dts +++ b/arch/arm/boot/dts/imx51-ts4800.dts @@ -113,6 +113,7 @@ &ipu_di0_disp1 { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm_backlight>; status = "okay"; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index d3583aad8323..985e1be03ad6 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -185,7 +185,7 @@ spba@70000000 { reg = <0x70000000 0x40000>; ranges; - esdhc1: esdhc@70004000 { + esdhc1: mmc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; @@ -196,7 +196,7 @@ esdhc1: esdhc@70004000 { status = "disabled"; }; - esdhc2: esdhc@70008000 { + esdhc2: mmc@70008000 { compatible = "fsl,imx51-esdhc"; reg = <0x70008000 0x4000>; interrupts = <2>; @@ -245,7 +245,7 @@ ssi2: ssi@70014000 { status = "disabled"; }; - esdhc3: esdhc@70020000 { + esdhc3: mmc@70020000 { compatible = "fsl,imx51-esdhc"; reg = <0x70020000 0x4000>; interrupts = <3>; @@ -257,7 +257,7 @@ esdhc3: esdhc@70020000 { status = "disabled"; }; - esdhc4: esdhc@70024000 { + esdhc4: mmc@70024000 { compatible = "fsl,imx51-esdhc"; reg = <0x70024000 0x4000>; interrupts = <4>; @@ -400,7 +400,7 @@ iomuxc: iomuxc@73fa8000 { }; pwm1: pwm@73fb4000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; reg = <0x73fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, @@ -410,7 +410,7 @@ pwm1: pwm@73fb4000 { }; pwm2: pwm@73fb8000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; reg = <0x73fb8000 0x4000>; clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, @@ -466,7 +466,7 @@ aipstz2: bridge@83f00000 { reg = <0x83f00000 0x60>; }; - iim: iim@83f98000 { + iim: efuse@83f98000 { compatible = "fsl,imx51-iim", "fsl,imx27-iim"; reg = <0x83f98000 0x4000>; interrupts = <69>; diff --git a/arch/arm/boot/dts/imx53-kp.dtsi b/arch/arm/boot/dts/imx53-kp.dtsi index 8b25416a5303..4508f34139a0 100644 --- a/arch/arm/boot/dts/imx53-kp.dtsi +++ b/arch/arm/boot/dts/imx53-kp.dtsi @@ -162,6 +162,14 @@ MX53_PAD_EIM_D20__GPIO3_20 0x1e4 >; }; +&pwm1 { + #pwm-cells = <2>; +}; + +&pwm2 { + #pwm-cells = <2>; +}; + &uart1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index daab56abe94a..a1a6228d1aa6 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -321,6 +321,7 @@ &ipu_di1_disp1 { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index 5ff9a179c83c..f7dcdf96e5c0 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -176,7 +176,7 @@ pwm_bl: backlight { power-supply = <®_3v3_lcd>; }; - leds { + leds-brightness { compatible = "pwm-leds"; alarm-brightness { @@ -185,6 +185,32 @@ alarm-brightness { }; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_alarmled_pins>; + + alarm1 { + label = "alarm:red"; + gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; + }; + + alarm2 { + label = "alarm:yellow"; + gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; + }; + + alarm3 { + label = "alarm:blue"; + gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + }; + + alarm4 { + label = "alarm:silenced"; + gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; + }; + }; + gpio-poweroff { compatible = "gpio-poweroff"; gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; @@ -598,12 +624,14 @@ &pmu { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm2 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; @@ -909,18 +937,10 @@ MX53_PAD_NANDF_CS2__GPIO6_15 0x0 MX53_PAD_NANDF_CS3__GPIO6_16 0x0 /* POWER_AND_BOOT_STATUS_INDICATOR */ MX53_PAD_PATA_INTRQ__GPIO7_2 0x1e4 - /* ACTIVATE_ALARM_LIGHT_RED */ - MX53_PAD_PATA_DIOR__GPIO7_3 0x0 - /* ACTIVATE_ALARM_LIGHT_YELLOW */ - MX53_PAD_PATA_DA_1__GPIO7_7 0x0 - /* ACTIVATE_ALARM_LIGHT_CYAN */ - MX53_PAD_PATA_DA_2__GPIO7_8 0x0 /* RUNNING_ON_BATTERY_INDICATOR_GREEN */ MX53_PAD_GPIO_16__GPIO7_11 0x0 /* BATTERY_STATUS_INDICATOR_AMBER */ MX53_PAD_GPIO_17__GPIO7_12 0x0 - /* AUDIO_ALARMS_SILENCED_INDICATOR */ - MX53_PAD_GPIO_18__GPIO7_13 0x0 >; }; @@ -1080,4 +1100,17 @@ pinctrl_usb_otg: usbotggrp { MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC 0x180 >; }; + + pinctrl_alarmled_pins: qmx6alarmledgrp { + fsl,pins = < + /* ACTIVATE_ALARM_LIGHT_RED */ + MX53_PAD_PATA_DIOR__GPIO7_3 0x0 + /* ACTIVATE_ALARM_LIGHT_YELLOW */ + MX53_PAD_PATA_DA_1__GPIO7_7 0x0 + /* ACTIVATE_ALARM_LIGHT_CYAN */ + MX53_PAD_PATA_DA_2__GPIO7_8 0x0 + /* AUDIO_ALARMS_SILENCED_INDICATOR */ + MX53_PAD_GPIO_18__GPIO7_13 0x0 + >; + }; }; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index ea90fd95ad01..9a6cb138adf3 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -209,6 +209,14 @@ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 }; }; +&pwm1 { + #pwm-cells = <2>; +}; + +&pwm2 { + #pwm-cells = <2>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 4ab135906949..7c9730f3f820 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -542,7 +542,6 @@ &nfc { &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; - #pwm-cells = <3>; }; &sdma { diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index afa57bf7b0ed..500eeaa3a27c 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -236,7 +236,7 @@ spba@50000000 { reg = <0x50000000 0x40000>; ranges; - esdhc1: esdhc@50004000 { + esdhc1: mmc@50004000 { compatible = "fsl,imx53-esdhc"; reg = <0x50004000 0x4000>; interrupts = <1>; @@ -248,7 +248,7 @@ esdhc1: esdhc@50004000 { status = "disabled"; }; - esdhc2: esdhc@50008000 { + esdhc2: mmc@50008000 { compatible = "fsl,imx53-esdhc"; reg = <0x50008000 0x4000>; interrupts = <2>; @@ -301,7 +301,7 @@ ssi2: ssi@50014000 { status = "disabled"; }; - esdhc3: esdhc@50020000 { + esdhc3: mmc@50020000 { compatible = "fsl,imx53-esdhc"; reg = <0x50020000 0x4000>; interrupts = <3>; @@ -313,7 +313,7 @@ esdhc3: esdhc@50020000 { status = "disabled"; }; - esdhc4: esdhc@50024000 { + esdhc4: mmc@50024000 { compatible = "fsl,imx53-esdhc"; reg = <0x50024000 0x4000>; interrupts = <4>; @@ -525,7 +525,7 @@ port@2 { }; pwm1: pwm@53fb4000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; reg = <0x53fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, @@ -535,7 +535,7 @@ pwm1: pwm@53fb4000 { }; pwm2: pwm@53fb8000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; reg = <0x53fb8000 0x4000>; clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, @@ -667,7 +667,7 @@ aipstz2: bridge@63f00000 { reg = <0x63f00000 0x60>; }; - iim: iim@63f98000 { + iim: efuse@63f98000 { compatible = "fsl,imx53-iim", "fsl,imx27-iim"; reg = <0x63f98000 0x4000>; interrupts = <69>; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index 37f80ab8ccd0..809ca5611072 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -79,5 +79,6 @@ &ipu1_di0_disp0 { }; &pwm1 { + #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts index 8d8c8c27e482..4d58cb4436d9 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts @@ -69,5 +69,6 @@ &ipu1_di0_disp0 { }; &pwm3 { + #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts index 385ce7b0029e..028951955bde 100644 --- a/arch/arm/boot/dts/imx6dl-mamoj.dts +++ b/arch/arm/boot/dts/imx6dl-mamoj.dts @@ -303,6 +303,7 @@ &ipu1_di0_disp0 { }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts new file mode 100644 index 000000000000..fa882458957b --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-prti6q.dtsi" +#include + +/ { + model = "Protonic RVT board"; + compatible = "prt,prtrvt", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x10000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-debug0 { + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&ecspi3 { + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; + + nfc@0 { + compatible = "ti,trf7970a"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + spi-max-frequency = <2000000>; + interrupts-extended = <&gpio5 14 IRQ_TYPE_LEVEL_LOW>; + ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, + <&gpio5 11 GPIO_ACTIVE_LOW>; + vin-supply = <®_3v3>; + vin-voltage-override = <3100000>; + autosuspend-delay = <30000>; + irq-status-read-quirk; + en2-rf-quirk; + t5t-rmb-extra-byte-quirk; + status = "okay"; + }; +}; + +&i2c3 { + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* nc */ + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + /* nc */ + channel@5 { + reg = <5>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + /* can1_l */ + channel@6 { + reg = <6>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + /* can1_h */ + channel@7 { + reg = <7>; + ti,gain = <3>; + ti,datarate = <3>; + }; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&pcie { + status = "okay"; +}; + +&usbh1 { + status = "disabled"; +}; + +&vpu { + status = "disabled"; +}; + +&iomuxc { + pinctrl_can1phy: can1phy { + fsl,pins = < + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070 + /* CAN1_TERM */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + /* NFC_ASK_OOK */ + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x100b1 + /* NFC_PWR_EN */ + MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x100b1 + /* NFC_EN2 */ + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x100b1 + /* NFC_EN */ + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 + /* NFC_MOD */ + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 + /* NFC_IRQ */ + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts new file mode 100644 index 000000000000..306b4f7bf762 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts @@ -0,0 +1,411 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2016 Protonic Holland + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-prti6q.dtsi" +#include +#include +#include + +/ { + model = "Protonic VT7"; + compatible = "prt,prtvt7", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; + + backlight_lcd: backlight-lcd { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm1 0 500000>; + brightness-levels = <0 20 81 248 1000>; + default-brightness-level = <20>; + num-interpolated-steps = <21>; + power-supply = <®_bl_12v0>; + enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + }; + + keys { + compatible = "gpio-keys"; + autorepeat; + + esc { + label = "GPIO Key ESC"; + linux,code = ; + gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>; + }; + + up { + label = "GPIO Key UP"; + linux,code = ; + gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>; + }; + + down { + label = "GPIO Key DOWN"; + linux,code = ; + gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>; + }; + + enter { + label = "GPIO Key Enter"; + linux,code = ; + gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>; + }; + + cycle { + label = "GPIO Key CYCLE"; + linux,code = ; + gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>; + }; + + f1 { + label = "GPIO Key F1"; + linux,code = ; + gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>; + }; + + f2 { + label = "GPIO Key F2"; + linux,code = ; + gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>; + }; + + f3 { + label = "GPIO Key F3"; + linux,code = ; + gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>; + }; + + f4 { + label = "GPIO Key F4"; + linux,code = ; + gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>; + }; + + f5 { + label = "GPIO Key F5"; + linux,code = ; + gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>; + }; + + f6 { + label = "GPIO Key F6"; + linux,code = ; + gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>; + }; + + f7 { + label = "GPIO Key F7"; + linux,code = ; + gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>; + }; + + f8 { + label = "GPIO Key F8"; + linux,code = ; + gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>; + }; + + f9 { + label = "GPIO Key F9"; + linux,code = ; + gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>; + }; + + f10 { + label = "GPIO Key F10"; + linux,code = ; + gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-debug0 { + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_bl_12v0: regulator-bl-12v0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_bl_12v0>; + regulator-name = "bl-12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "prti6q-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Line", "Line In Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "External Speaker", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + system-clock-frequency = <0>; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + bitclock-master; + frame-master; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + mux-ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN 0 + IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TFSDIR 0 + IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + mux-pins3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) + 0 IMX_AUDMUX_V2_PDCR_TXRXEN + >; + }; +}; + +&can1 { + pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; +}; + +&ecspi2 { + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&i2c1 { + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0xa>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec>; + #sound-dai-cells = <0>; + clocks = <&clks 201>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <®_3v3>; + VDDD-supply = <®_1v8>; + }; +}; + +&i2c3 { + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + gpio_pca: gpio@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + interrupts-extended = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&ipu1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; + status = "okay"; +}; + +&pwm1 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&ssi1 { + #sound-dai-cells = <0>; + fsl,mode = "ac97-slave"; + status = "okay"; +}; + +&usbh1 { + status = "disabled"; +}; + +&vpu { + status = "disabled"; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 + >; + }; + + pinctrl_can1phy: can1phy { + fsl,pins = < + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070 + /* CAN1_TERM */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_codec: codecgrp { + fsl,pins = < + /* AUDIO_nRESET */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 + >; + }; + + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + /* ITU656_nRESET */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + /* ITU656_nPDN */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 + >; + }; + + pinctrl_ipu1_disp: ipudisp1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xb0 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xb0 + + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xb0 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xb0 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xb0 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xb0 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xb0 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xb0 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xb0 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xb0 + + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xb0 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xb0 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xb0 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xb0 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xb0 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xb0 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xb0 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xb0 + + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xb0 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xb0 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xb0 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xb0 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xb0 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xb0 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xb0 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xb0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0 + >; + }; + + pinctrl_reg_bl_12v0: 12blgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 + >; + }; + + pinctrl_tsc: tscgrp { + + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index 2b9423d55c37..c4a235d212b6 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -540,7 +540,6 @@ &pcie { }; &pwm1 { - #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index 37c63402157b..fc81f2f4b62d 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -334,6 +334,7 @@ &pcie { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts index a2dd7e549568..a685b1c3208f 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts @@ -253,7 +253,6 @@ &pcie { &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; - #pwm-cells = <3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi index 83524bb99eb3..fef5d7254536 100644 --- a/arch/arm/boot/dts/imx6q-display5.dtsi +++ b/arch/arm/boot/dts/imx6q-display5.dtsi @@ -399,7 +399,6 @@ lvds0_out: endpoint { }; &pwm2 { - #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/imx6q-kp.dtsi index 24c8169baf44..1ade0bff681d 100644 --- a/arch/arm/boot/dts/imx6q-kp.dtsi +++ b/arch/arm/boot/dts/imx6q-kp.dtsi @@ -378,12 +378,14 @@ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm2 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts index a4d295455e67..55692c73943d 100644 --- a/arch/arm/boot/dts/imx6q-mccmon6.dts +++ b/arch/arm/boot/dts/imx6q-mccmon6.dts @@ -237,7 +237,6 @@ lvds0_out: endpoint { }; &pwm2 { - #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index 69f170ff31c5..52e3567d1859 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -455,6 +455,7 @@ &pcie { }; &pwm1 { + #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts index a31b17eaf51c..7a33e54cc0f1 100644 --- a/arch/arm/boot/dts/imx6q-pistachio.dts +++ b/arch/arm/boot/dts/imx6q-pistachio.dts @@ -570,6 +570,7 @@ lvds0_out: endpoint { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts new file mode 100644 index 000000000000..de6cbaab8b49 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-prti6q.dts @@ -0,0 +1,543 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-prti6q.dtsi" +#include +#include + +/ { + model = "Protonic PRTI6Q board"; + compatible = "prt,prti6q", "fsl,imx6q"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0xf0000000>; + }; + + backlight_lcd: backlight-lcd { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 16 64 255>; + num-interpolated-steps = <16>; + default-brightness-level = <1>; + power-supply = <®_3v3>; + enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + }; + + can_osc: can-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-debug0 { + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-debug1 { + function = LED_FUNCTION_SD; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + }; + + panel { + compatible = "kyo,tcg121xglp"; + backlight = <&backlight_lcd>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_npd>; + enable-active-high; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "regulator-WL12xx"; + startup-delay-us = <70000>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "prti6q-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Line", "Line In Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "External Speaker", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + system-clock-frequency = <0>; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + bitclock-master; + frame-master; + }; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-in; + spdif-out; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + mux-ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN 0 + IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TFSDIR 0 + IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + mux-pins3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) + 0 IMX_AUDMUX_V2_PDCR_TXRXEN + >; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio4 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>; + status = "okay"; + + can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can3>; + clocks = <&can_osc>; + interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <5000000>; + }; + + adc@1 { + compatible = "ti,adc128s052"; + reg = <1>; + spi-max-frequency = <2000000>; + vref-supply = <®_3v3>; + }; +}; + +&ecspi3 { + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ9031RNX PHY */ + rgmii_phy: ethernet-phy@4 { + reg = <4>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0xa>; + #sound-dai-cells = <0>; + clocks = <&clks 201>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <®_3v3>; + VDDD-supply = <®_1v8>; + }; +}; + +/* DDC */ +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* can2_l */ + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + /* can2_h */ + channel@5 { + reg = <5>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + /* can1_l */ + channel@6 { + reg = <6>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + /* can1_h */ + channel@7 { + reg = <7>; + ti,gain = <3>; + ti,datarate = <3>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pwm1 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + status = "okay"; +}; + +&ssi1 { + #sound-dai-cells = <0>; + fsl,mode = "ac97-slave"; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + pinctrl-0 = <&pinctrl_usbotg &pinctrl_usbotg_id>; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + non-removable; + vmmc-supply = <®_wifi>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + wifi { + compatible = "ti,wl1271"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi>; + interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = "38400000"; + tcxo-clock-frequency = "19200000"; + }; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b008 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b008 + >; + }; + + pinctrl_can3: can3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 + >; + }; + + pinctrl_ecspi2_cs: ecspi2csgrp { + fsl,pins = < + /* ADC128S022 CS */ + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b1 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 + + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 + >; + }; + + pinctrl_hdmi: hdmigrp { + fsl,pins = < + /* NOTE: DDC is done via I2C2, so DON'T + * configure DDC pins for HDMI! + */ + MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + /* DDC */ + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg_id: usbotgidgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1f058 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_wifi: wifigrp { + fsl,pins = < + /* WL12xx IRQ */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x10880 + >; + }; + + pinctrl_wifi_npd: wifinpd { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b8b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts new file mode 100644 index 000000000000..dffafbcaa7af --- /dev/null +++ b/arch/arm/boot/dts/imx6q-prtwd2.dts @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2018 Protonic Holland + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-prti6q.dtsi" +#include + +/ { + model = "Protonic WD2 board"; + compatible = "prt,prtwd2", "fsl,imx6q"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_npd>; + reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; + }; + + /* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */ + i2c@4 { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <20>; /* ~10 kHz */ + i2c-gpio,scl-output-only; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>; + clock-names = "ipg", "ahb"; + status = "okay"; + + fixed-link { + speed = <100>; + pause; + full-duplex; + }; +}; + +&i2c3 { + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* V in */ + channel@4 { + reg = <4>; + ti,gain = <1>; + ti,datarate = <3>; + }; + + /* I charge */ + channel@5 { + reg = <5>; + ti,gain = <1>; + ti,datarate = <3>; + }; + + /* V bus */ + channel@6 { + reg = <6>; + ti,gain = <1>; + ti,datarate = <3>; + }; + + /* nc */ + channel@7 { + reg = <7>; + ti,gain = <1>; + ti,datarate = <3>; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + non-removable; + mmc-pwrseq = <&usdhc2_wifi_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_eth_chg>; + + pinctrl_can1phy: can1phy { + fsl,pins = < + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + /* MX6QDL_ENET_PINGRP4 */ + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x130b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0 + /* nINTRP */ + MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0 + + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__GPIO1_IO22 0x1f8b0 + MX6QDL_PAD_ENET_MDC__GPIO1_IO31 0x1f8b0 + >; + }; + + pinctrl_usb_eth_chg: usbethchggrp { + fsl,pins = < + /* USB charging control */ + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x130b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x130b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x130b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x130b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_wifi_npd: wifinpd { + fsl,pins = < + /* WL_REG_ON */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index bfff87ce2e1f..861e05d53157 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -99,8 +99,20 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@4 { + reg = <4>; + qca,clk-out-frequency = <125000000>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + }; + }; }; &hdmi { diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts index c54362fcc508..a57c2e3a8435 100644 --- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts +++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts @@ -203,6 +203,7 @@ lvds1_out: endpoint { }; &pwm2 { + #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index e34be8fabd93..dbdd7db60325 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -371,6 +371,7 @@ &pwm3 { }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index b8e74ab3c993..2577eb4f535a 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -211,6 +211,7 @@ &pcie { }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index 376750882ed3..d38630d4b892 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -336,6 +336,7 @@ &pcie { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 240b86d2eb71..0930194fd960 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -312,6 +312,7 @@ &pwm2 { /* Colibri PWM */ &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "disabled"; @@ -362,7 +363,6 @@ &uart3 { }; &usbotg { - pinctrl-names = "default"; disable-over-current; dr_mode = "peripheral"; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index e3be453d8a4a..67042793b0ca 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -233,6 +233,7 @@ MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x17059 }; &pwm1 { + #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi index 70d26616d771..35e230f991f1 100644 --- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi +++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi @@ -737,14 +737,17 @@ &pcie { }; &pwm1 { + #pwm-cells = <2>; status = "okay"; }; &pwm3 { + #pwm-cells = <2>; status = "okay"; }; &pwm4 { + #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 419a7cdc8ab5..7705285d9e3c 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -4,6 +4,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -19,6 +20,53 @@ chosen { bootargs = "console=ttymxc1,115200"; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -102,6 +150,103 @@ &i2c1 { pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -126,13 +271,6 @@ eeprom4: eeprom@53 { pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -387,6 +525,7 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */ >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 60563ff0b7ce..a46ea98228c2 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -4,6 +4,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -28,6 +29,53 @@ backlight { default-brightness-level = <7>; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -165,6 +213,109 @@ &i2c1 { pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + + channel@29 { + gw,mode = <1>; + reg = <0x29>; + label = "vdd_an1"; + }; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -189,13 +340,6 @@ eeprom4: eeprom@53 { pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -365,6 +509,7 @@ &pwm3 { }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; @@ -504,6 +649,7 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 8942bec65c5c..a28e79463d0c 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -4,6 +4,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -28,6 +29,53 @@ backlight { default-brightness-level = <7>; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -158,6 +206,115 @@ &i2c1 { pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + + channel@26 { + gw,mode = <1>; + reg = <0x26>; + label = "vdd_gps"; + }; + + channel@29 { + gw,mode = <1>; + reg = <0x29>; + label = "vdd_an1"; + }; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -182,13 +339,6 @@ eeprom4: eeprom@53 { pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -356,6 +506,7 @@ &pwm3 { }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; @@ -486,6 +637,7 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index c40583dbd96d..b5f934b8a239 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -4,6 +4,7 @@ */ #include +#include #include / { @@ -29,6 +30,53 @@ backlight { default-brightness-level = <7>; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -195,6 +243,117 @@ &i2c1 { pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + + channel@26 { + gw,mode = <1>; + reg = <0x26>; + label = "vdd_gps"; + }; + }; + + fan-controller@2c { + compatible = "gw,gsc-fan"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2c>; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -219,13 +378,6 @@ eeprom4: eeprom@53 { pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -419,6 +571,7 @@ &pwm3 { }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default", "state_dio"; pinctrl-0 = <&pinctrl_pwm4_backlight>; pinctrl-1 = <&pinctrl_pwm4_dio>; @@ -571,6 +724,7 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index c38e86eedcc0..ea41875da689 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -47,6 +47,7 @@ #include #include +#include #include / { @@ -63,6 +64,53 @@ chosen { bootargs = "console=ttymxc1,115200"; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -167,6 +215,97 @@ &i2c1 { pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8a"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0b"; + }; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -191,13 +330,6 @@ eeprom4: eeprom@53 { pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -464,6 +596,7 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index bb3597132c62..0da6e6f7482b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -4,6 +4,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -20,6 +21,53 @@ chosen { bootargs = "console=ttymxc1,115200"; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -92,6 +140,103 @@ &i2c1 { pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -116,13 +261,6 @@ eeprom4: eeprom@53 { pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -305,6 +443,7 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi index ee85031c3916..db30de5d6490 100644 --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi @@ -46,6 +46,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -61,6 +62,53 @@ chosen { stdout-path = &uart2; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -130,11 +178,101 @@ &i2c1 { pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio: pca9555@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8a"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0b"; + }; + + channel@26 { + gw,mode = <1>; + reg = <0x26>; + label = "vdd_an1"; + }; + }; + }; + + gsc_gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom1: eeprom@50 { @@ -428,6 +566,7 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index 69ca70d3baa8..d6b074597518 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -88,6 +88,53 @@ backlight-keypad { default-on; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -243,6 +290,115 @@ &i2c1 { pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + + channel@26 { + gw,mode = <1>; + reg = <0x26>; + label = "vdd_gps"; + }; + + channel@29 { + gw,mode = <1>; + reg = <0x29>; + label = "vdd_an2"; + }; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -267,13 +423,6 @@ eeprom4: eeprom@53 { pagesize = <16>; }; - pca9555: gpio@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - ds1672: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -471,6 +620,7 @@ &pwm3 { }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; @@ -608,6 +758,7 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi index aee9221f0f29..fbe6c32bd756 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi @@ -46,6 +46,7 @@ */ #include +#include / { chosen { @@ -71,6 +72,53 @@ backlight { default-brightness-level = <100>; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -183,11 +231,101 @@ &i2c1 { pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pca9555: gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom1: eeprom@50 { @@ -365,6 +503,7 @@ timing0: g101evn010 { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi index 76d6cf57f1c3..23c6e4047621 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -46,6 +46,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -68,6 +69,53 @@ backlight { default-brightness-level = <7>; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -205,11 +253,101 @@ &i2c1 { pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pca9555: gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom1: eeprom@50 { @@ -401,6 +539,7 @@ &pwm3 { }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; @@ -503,6 +642,7 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */ >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi index 0bdebddffd51..b1ff7c859c4d 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi @@ -4,6 +4,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -19,6 +20,53 @@ chosen { stdout-path = &uart2; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -102,11 +150,101 @@ &i2c1 { pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom@50 { @@ -133,7 +271,7 @@ eeprom@53 { pagesize = <16>; }; - rtc@68 { + ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi index 0857de505192..11f84ee7b88f 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi @@ -4,6 +4,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -22,6 +23,53 @@ memory@10000000 { reg = <0x10000000 0x20000000>; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -111,11 +159,121 @@ &i2c1 { pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <3>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <800000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_5p0"; + gw,voltage-divider-ohms = <22100 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_3p0"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_arm"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_soc"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_1p5"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_1p8"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_1p0"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@9c { + gw,mode = <2>; + reg = <0x9c>; + label = "vdd_an1"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gsc_gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom@50 { diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi index 8c57fd2f9a0b..0a1ffff9eb75 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi @@ -4,6 +4,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -20,6 +21,53 @@ chosen { stdout-path = &uart2; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -106,11 +154,109 @@ &i2c1 { pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + + fan-controller@a { + compatible = "gw,gsc-fan"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0a>; + }; + }; + + gsc_gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom@50 { diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi index 635c203bd64d..d62a8da49367 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi @@ -4,6 +4,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -19,6 +20,53 @@ chosen { stdout-path = &uart2; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -87,11 +135,114 @@ &i2c1 { pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <3>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <800000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_5p0"; + gw,voltage-divider-ohms = <22100 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_arm"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_soc"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_1p5"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_1p0"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_3p0"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_an1"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gsc_gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom@50 { diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index 756f3a9f1b4f..f2f475ea74e0 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -245,6 +245,7 @@ mipi_csi2_in: endpoint { }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index 2418cf8f2317..d526f01a2c52 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -497,6 +497,7 @@ &pcie { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -509,6 +510,7 @@ &pwm3 { }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index c3415aa348a2..185a1a31ca39 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -736,12 +736,14 @@ &pcie { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm2 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; @@ -754,6 +756,7 @@ &pwm3 { }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index ed53f07c6b7b..4bbe54e1ddb5 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -639,6 +639,7 @@ &pcie { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -651,6 +652,7 @@ &pwm3 { }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 8b0e432099b5..c63e1bc1ad3a 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -596,6 +596,7 @@ &pcie { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -608,6 +609,7 @@ &pwm3 { }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi index 9ebd438dce7d..019938562aa9 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi @@ -218,6 +218,7 @@ &pcie { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi new file mode 100644 index 000000000000..19578f660b09 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + */ + +#include +#include + +/ { + chosen { + stdout-path = &uart4; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_h1_vbus: regulator-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "h1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&can1 { + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "utmi"; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b008 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b008 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index cf628465cd0a..55f736dbee0b 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -800,6 +800,7 @@ timing0: hsd100pxn1 { }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 8468216dae9b..95f9ddab5996 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -687,18 +687,21 @@ &pcie { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 28b35ccb3757..68b3e68cb8df 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -203,9 +203,21 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; fsl,magic-packet; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@1 { + reg = <1>; + qca,clk-out-frequency = <125000000>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + }; + }; }; &hdmi { @@ -729,6 +741,7 @@ &pcie { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi index a616e3c400d3..02e6d36e85fa 100644 --- a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi @@ -140,6 +140,7 @@ lvds0_out: endpoint { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index c68cb90fd801..362e65ccaa78 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -738,14 +738,12 @@ MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */ &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; - #pwm-cells = <3>; status = "disabled"; }; &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; - #pwm-cells = <3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 20350e803377..5af9ce977b12 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -719,6 +719,8 @@ &fec { mdio { #address-cells = <1>; #size-cells = <0>; + clock-frequency = <12500000>; + suppress-preamble; status = "okay"; switch: switch@0 { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 32114cf6acee..43edbf1156c7 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -69,17 +69,6 @@ osc { }; }; - tempmon: tempmon { - compatible = "fsl,imx6q-tempmon"; - interrupt-parent = <&gpc>; - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; - #thermal-sensor-cells = <0>; - }; - ldb: ldb { #address-cells = <1>; #size-cells = <0>; @@ -256,7 +245,7 @@ intc: interrupt-controller@a01000 { interrupt-parent = <&intc>; }; - L2: l2-cache@a02000 { + L2: cache-controller@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; @@ -510,7 +499,7 @@ aipstz@207c000 { /* AIPSTZ1 */ }; pwm1: pwm@2080000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; @@ -521,7 +510,7 @@ pwm1: pwm@2080000 { }; pwm2: pwm@2084000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; @@ -532,7 +521,7 @@ pwm2: pwm@2084000 { }; pwm3: pwm@2088000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; @@ -543,7 +532,7 @@ pwm3: pwm@2088000 { }; pwm4: pwm@208c000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; @@ -795,6 +784,17 @@ reg_soc: regulator-vddsoc { anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + #thermal-sensor-cells = <0>; + }; }; usbphy1: usbphy@20c9000 { @@ -871,8 +871,7 @@ gpc: gpc@20dc000 { reg = <0x020dc000 0x4000>; interrupt-controller; #interrupt-cells = <3>; - interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, - <0 90 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&intc>; clocks = <&clks IMX6QDL_CLK_IPG>; clock-names = "ipg"; @@ -1057,7 +1056,7 @@ mlb@218c000 { <0 126 IRQ_TYPE_LEVEL_HIGH>; }; - usdhc1: usdhc@2190000 { + usdhc1: mmc@2190000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; @@ -1069,7 +1068,7 @@ usdhc1: usdhc@2190000 { status = "disabled"; }; - usdhc2: usdhc@2194000 { + usdhc2: mmc@2194000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; @@ -1081,7 +1080,7 @@ usdhc2: usdhc@2194000 { status = "disabled"; }; - usdhc3: usdhc@2198000 { + usdhc3: mmc@2198000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; @@ -1093,7 +1092,7 @@ usdhc3: usdhc@2198000 { status = "disabled"; }; - usdhc4: usdhc@219c000 { + usdhc4: mmc@219c000 { compatible = "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; @@ -1162,7 +1161,7 @@ weim: weim@21b8000 { status = "disabled"; }; - ocotp: ocotp-ctrl@21bc000 { + ocotp: efuse@21bc000 { compatible = "fsl,imx6q-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6QDL_CLK_IIM>; diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts index d4caeeb0af70..639d9dd35377 100644 --- a/arch/arm/boot/dts/imx6qp-sabreauto.dts +++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts @@ -50,6 +50,10 @@ &pcie { status = "disabled"; }; +&sata { + status = "okay"; +}; + &vgen3_reg { regulator-always-on; }; diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts index f1b9cb104fdd..480e73183f6b 100644 --- a/arch/arm/boot/dts/imx6qp-sabresd.dts +++ b/arch/arm/boot/dts/imx6qp-sabresd.dts @@ -53,3 +53,7 @@ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 &pcie { status = "disabled"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index bc86cfaaa9c2..b1b069e723d2 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -575,6 +575,7 @@ display_out: endpoint { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 911d8cf77f2c..1c7180f28539 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -93,16 +93,6 @@ osc { }; }; - tempmon: tempmon { - compatible = "fsl,imx6q-tempmon"; - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gpc>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; - }; - pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&gpc>; @@ -136,7 +126,7 @@ intc: interrupt-controller@a01000 { interrupt-parent = <&intc>; }; - L2: l2-cache@a02000 { + L2: cache-controller@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; @@ -344,7 +334,7 @@ uart4: serial@2038000 { }; pwm1: pwm@2080000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; @@ -354,7 +344,7 @@ pwm1: pwm@2080000 { }; pwm2: pwm@2084000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; @@ -364,7 +354,7 @@ pwm2: pwm@2084000 { }; pwm3: pwm@2088000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; @@ -374,7 +364,7 @@ pwm3: pwm@2088000 { }; pwm4: pwm@208c000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; @@ -628,6 +618,16 @@ reg_soc: regulator-vddsoc { anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpc>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usbphy@20c9000 { @@ -854,7 +854,7 @@ fec: ethernet@2188000 { status = "disabled"; }; - usdhc1: usdhc@2190000 { + usdhc1: mmc@2190000 { compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; @@ -866,7 +866,7 @@ usdhc1: usdhc@2190000 { status = "disabled"; }; - usdhc2: usdhc@2194000 { + usdhc2: mmc@2194000 { compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; @@ -878,7 +878,7 @@ usdhc2: usdhc@2194000 { status = "disabled"; }; - usdhc3: usdhc@2198000 { + usdhc3: mmc@2198000 { compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; @@ -890,7 +890,7 @@ usdhc3: usdhc@2198000 { status = "disabled"; }; - usdhc4: usdhc@219c000 { + usdhc4: mmc@219c000 { compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; @@ -952,7 +952,7 @@ weim: weim@21b8000 { status = "disabled"; }; - ocotp: ocotp-ctrl@21bc000 { + ocotp: efuse@21bc000 { compatible = "fsl,imx6sl-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6SL_CLK_OCOTP>; diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts index 5ace9e6acf85..c755cbdb7cde 100644 --- a/arch/arm/boot/dts/imx6sll-evk.dts +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -260,6 +260,7 @@ display_out: endpoint { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index edd3abb9a9f1..fb5d3bc50c6b 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -105,16 +105,6 @@ ipp_di1: clock-ipp-di1 { clock-output-names = "ipp_di1"; }; - tempmon: temperature-sensor { - compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; - interrupts = ; - interrupt-parent = <&gpc>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; - }; - soc { #address-cells = <1>; #size-cells = <1>; @@ -136,7 +126,7 @@ intc: interrupt-controller@a01000 { interrupt-parent = <&intc>; }; - L2: l2-cache@a02000 { + L2: cache-controller@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = ; @@ -271,7 +261,7 @@ uart2: serial@2024000 { status = "disabled"; }; - ssi1: ssi-controller@2028000 { + ssi1: ssi@2028000 { compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = ; @@ -284,7 +274,7 @@ ssi1: ssi-controller@2028000 { status = "disabled"; }; - ssi2: ssi-controller@202c000 { + ssi2: ssi@202c000 { compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = ; @@ -297,7 +287,7 @@ ssi2: ssi-controller@202c000 { status = "disabled"; }; - ssi3: ssi-controller@2030000 { + ssi3: ssi@2030000 { compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = ; @@ -331,7 +321,7 @@ pwm1: pwm@2080000 { clocks = <&clks IMX6SLL_CLK_PWM1>, <&clks IMX6SLL_CLK_PWM1>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm2: pwm@2084000 { @@ -341,7 +331,7 @@ pwm2: pwm@2084000 { clocks = <&clks IMX6SLL_CLK_PWM2>, <&clks IMX6SLL_CLK_PWM2>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm3: pwm@2088000 { @@ -351,7 +341,7 @@ pwm3: pwm@2088000 { clocks = <&clks IMX6SLL_CLK_PWM3>, <&clks IMX6SLL_CLK_PWM3>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm4: pwm@208c000 { @@ -361,7 +351,7 @@ pwm4: pwm@208c000 { clocks = <&clks IMX6SLL_CLK_PWM4>, <&clks IMX6SLL_CLK_PWM4>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; gpt1: timer@2098000 { @@ -531,6 +521,16 @@ reg_3p0: regulator-3p0@20c8120 { anatop-max-voltage = <3400000>; anatop-enable-bit = <0>; }; + + tempmon: temperature-sensor { + compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; + interrupts = ; + interrupt-parent = <&gpc>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usb-phy@20c9000 { @@ -786,7 +786,7 @@ mmdc: memory-controller@21b0000 { clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>; }; - ocotp: ocotp-ctrl@21bc000 { + ocotp: efuse@21bc000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,imx6sll-ocotp", "syscon"; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index d84ea6999377..66af78e83b70 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -229,6 +229,7 @@ &pcie { }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index 825924448ab4..76a4c06e0ff2 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -66,12 +66,68 @@ reg_can_stby: regulator-can-stby { enable-active-high; vin-supply = <®_can_en>; }; + + reg_cs42888: cs42888_supply { + compatible = "regulator-fixed"; + regulator-name = "cs42888_supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sound-cs42888 { + compatible = "fsl,imx6-sabreauto-cs42888", + "fsl,imx-audio-cs42888"; + model = "imx-cs42888"; + audio-cpu = <&esai>; + audio-asrc = <&asrc>; + audio-codec = <&cs42888>; + audio-routing = + "Line Out Jack", "AOUT1L", + "Line Out Jack", "AOUT1R", + "Line Out Jack", "AOUT2L", + "Line Out Jack", "AOUT2R", + "Line Out Jack", "AOUT3L", + "Line Out Jack", "AOUT3R", + "Line Out Jack", "AOUT4L", + "Line Out Jack", "AOUT4R", + "AIN1L", "Line In Jack", + "AIN1R", "Line In Jack", + "AIN2L", "Line In Jack", + "AIN2R", "Line In Jack"; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-in; + }; }; &anaclk2 { clock-frequency = <24576000>; }; +&clks { + assigned-clocks = <&clks IMX6SX_PLL4_BYPASS_SRC>, + <&clks IMX6SX_PLL4_BYPASS>, + <&clks IMX6SX_CLK_PLL4_POST_DIV>; + assigned-clock-parents = <&clks IMX6SX_CLK_LVDS2_IN>, + <&clks IMX6SX_PLL4_BYPASS_SRC>; + assigned-clock-rates = <0>, <0>, <24576000>; +}; + +&esai { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esai>; + assigned-clocks = <&clks IMX6SX_CLK_ESAI_SEL>, + <&clks IMX6SX_CLK_ESAI_EXTAL>; + assigned-clock-parents = <&clks IMX6SX_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <24576000>; + status = "okay"; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; @@ -193,6 +249,21 @@ MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 >; }; + pinctrl_esai: esaigrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK 0x1b030 + MX6SX_PAD_CSI_DATA01__ESAI_TX_FS 0x1b030 + MX6SX_PAD_CSI_HSYNC__ESAI_TX0 0x1b030 + MX6SX_PAD_CSI_DATA04__ESAI_TX1 0x1b030 + MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3 0x1b030 + MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x1b030 + MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK 0x1b030 + MX6SX_PAD_CSI_DATA03__ESAI_RX_FS 0x1b030 + MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x1b030 + MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1 0x1b030 + >; + }; + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020 @@ -227,6 +298,12 @@ MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x17059 >; }; + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6SX_PAD_ENET2_COL__SPDIF_IN 0x1b0b0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 @@ -313,6 +390,17 @@ &i2c2 { pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + cs42888: cs42888@48 { + compatible = "cirrus,cs42888"; + reg = <0x48>; + clocks = <&anaclk2 0>; + clock-names = "mclk"; + VA-supply = <®_cs42888>; + VD-supply = <®_cs42888>; + VLS-supply = <®_cs42888>; + VLC-supply = <®_cs42888>; + }; + touchscreen@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; @@ -454,6 +542,14 @@ max7310_b: gpio@32 { }; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; diff --git a/arch/arm/boot/dts/imx6sx-sdb-mqs.dts b/arch/arm/boot/dts/imx6sx-sdb-mqs.dts new file mode 100644 index 000000000000..a4ab2d3e960c --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-sdb-mqs.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2014 Freescale Semiconductor, Inc. + +#include "imx6sx-sdb.dts" +/ { + + sound { + status = "disabled"; + }; + + sound-mqs { + compatible = "fsl,imx6sx-sdb-mqs", + "fsl,imx-audio-mqs"; + model = "mqs-audio"; + audio-cpu = <&sai1>; + audio-asrc = <&asrc>; + audio-codec = <&mqs>; + }; +}; + +&usdhc2 { + /* pin conflict with mqs*/ + status = "disabled"; +}; + +&mqs { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mqs>; + clocks = <&clks IMX6SX_CLK_SAI1>; + clock-names = "mclk"; + status = "okay"; +}; + +&sai1 { + pinctrl-0 = <>; + status = "okay"; +}; + +&ssi2 { + status = "disabled"; +}; + +&sdma { + gpr = <&gpr>; + /* SDMA event remap for SAI1 */ + fsl,sdma-event-remap = <0 15 1>, <0 16 1>; +}; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 3e5fb72f21fc..661f803983a1 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -179,6 +179,15 @@ panel_in: endpoint { }; }; }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif", + "fsl,imx6sx-sdb-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-out; + }; + }; &audmux { @@ -281,6 +290,7 @@ display_out: endpoint { }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; @@ -296,6 +306,14 @@ &sai1 { status = "disabled"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &ssi2 { status = "okay"; }; @@ -505,6 +523,13 @@ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 >; }; + pinctrl_mqs: mqsgrp { + fsl,pins = < + MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0 + MX6SX_PAD_SD2_CMD__MQS_LEFT 0x120b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0 @@ -562,6 +587,12 @@ MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 >; }; + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6SX_PAD_SD4_DATA4__SPDIF_OUT 0x1b0b0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts index 6b728b03f1f2..d25e27d0315f 100644 --- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts +++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts @@ -505,18 +505,21 @@ &pcie { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm2 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; }; &pwm6 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm6>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 94e3df47d1ad..b480dfa9e251 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -134,14 +134,10 @@ anaclk2: clock-anaclk2 { clock-output-names = "anaclk2"; }; - tempmon: tempmon { - compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; - interrupt-parent = <&gpc>; - interrupts = ; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + mqs: mqs { + compatible = "fsl,imx6sx-mqs"; + gpr = <&gpr>; + status = "disabled"; }; pmu { @@ -183,7 +179,7 @@ intc: interrupt-controller@a01000 { interrupt-parent = <&intc>; }; - L2: l2-cache@a02000 { + L2: cache-controller@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = ; @@ -335,6 +331,7 @@ uart1: serial@2020000 { }; esai: esai@2024000 { + compatible = "fsl,imx6sx-esai", "fsl,imx35-esai"; reg = <0x02024000 0x4000>; interrupts = ; clocks = <&clks IMX6SX_CLK_ESAI_IPG>, @@ -344,6 +341,9 @@ esai: esai@2024000 { <&clks IMX6SX_CLK_SPBA>; clock-names = "core", "mem", "extal", "fsys", "spba"; + dmas = <&sdma 23 21 0>, + <&sdma 24 21 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -390,18 +390,28 @@ ssi3: ssi@2030000 { }; asrc: asrc@2034000 { + compatible = "fsl,imx6sx-asrc", "fsl,imx53-asrc"; reg = <0x02034000 0x4000>; interrupts = ; - clocks = <&clks IMX6SX_CLK_ASRC_MEM>, - <&clks IMX6SX_CLK_ASRC_IPG>, - <&clks IMX6SX_CLK_SPDIF>, - <&clks IMX6SX_CLK_SPBA>; - clock-names = "mem", "ipg", "asrck", "spba"; - dmas = <&sdma 17 20 1>, <&sdma 18 20 1>, - <&sdma 19 20 1>, <&sdma 20 20 1>, - <&sdma 21 20 1>, <&sdma 22 20 1>; + clocks = <&clks IMX6SX_CLK_ASRC_IPG>, + <&clks IMX6SX_CLK_ASRC_MEM>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks IMX6SX_CLK_SPDIF>, <&clks 0>, <&clks 0>, + <&clks IMX6SX_CLK_SPBA>; + clock-names = "mem", "ipg", "asrck_0", + "asrck_1", "asrck_2", "asrck_3", "asrck_4", + "asrck_5", "asrck_6", "asrck_7", "asrck_8", + "asrck_9", "asrck_a", "asrck_b", "asrck_c", + "asrck_d", "asrck_e", "asrck_f", "spba"; + dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, + <&sdma 19 23 1>, <&sdma 20 23 1>, + <&sdma 21 23 1>, <&sdma 22 23 1>; dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc"; + fsl,asrc-rate = <48000>; + fsl,asrc-width = <16>; status = "okay"; }; }; @@ -413,7 +423,7 @@ pwm1: pwm@2080000 { clocks = <&clks IMX6SX_CLK_PWM1>, <&clks IMX6SX_CLK_PWM1>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm2: pwm@2084000 { @@ -423,7 +433,7 @@ pwm2: pwm@2084000 { clocks = <&clks IMX6SX_CLK_PWM2>, <&clks IMX6SX_CLK_PWM2>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm3: pwm@2088000 { @@ -433,7 +443,7 @@ pwm3: pwm@2088000 { clocks = <&clks IMX6SX_CLK_PWM3>, <&clks IMX6SX_CLK_PWM3>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm4: pwm@208c000 { @@ -443,7 +453,7 @@ pwm4: pwm@208c000 { clocks = <&clks IMX6SX_CLK_PWM4>, <&clks IMX6SX_CLK_PWM4>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; flexcan1: can@2090000 { @@ -696,6 +706,16 @@ reg_soc: regulator-vddsoc { anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; + interrupt-parent = <&gpc>; + interrupts = ; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usbphy@20c9000 { @@ -943,7 +963,7 @@ mlb: mlb@218c000 { status = "disabled"; }; - usdhc1: usdhc@2190000 { + usdhc1: mmc@2190000 { compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; reg = <0x02190000 0x4000>; interrupts = ; @@ -955,7 +975,7 @@ usdhc1: usdhc@2190000 { status = "disabled"; }; - usdhc2: usdhc@2194000 { + usdhc2: mmc@2194000 { compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; reg = <0x02194000 0x4000>; interrupts = ; @@ -967,7 +987,7 @@ usdhc2: usdhc@2194000 { status = "disabled"; }; - usdhc3: usdhc@2198000 { + usdhc3: mmc@2198000 { compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; reg = <0x02198000 0x4000>; interrupts = ; @@ -979,7 +999,7 @@ usdhc3: usdhc@2198000 { status = "disabled"; }; - usdhc4: usdhc@219c000 { + usdhc4: mmc@219c000 { compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; reg = <0x0219c000 0x4000>; interrupts = ; @@ -1055,7 +1075,7 @@ weim: weim@21b8000 { status = "disabled"; }; - ocotp: ocotp-ctrl@21bc000 { + ocotp: efuse@21bc000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,imx6sx-ocotp", "syscon"; @@ -1337,7 +1357,7 @@ pwm5: pwm@22a4000 { clocks = <&clks IMX6SX_CLK_PWM5>, <&clks IMX6SX_CLK_PWM5>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm6: pwm@22a8000 { @@ -1347,7 +1367,7 @@ pwm6: pwm@22a8000 { clocks = <&clks IMX6SX_CLK_PWM6>, <&clks IMX6SX_CLK_PWM6>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm7: pwm@22ac000 { @@ -1357,7 +1377,7 @@ pwm7: pwm@22ac000 { clocks = <&clks IMX6SX_CLK_PWM7>, <&clks IMX6SX_CLK_PWM7>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm8: pwm@22b0000 { @@ -1367,7 +1387,7 @@ pwm8: pwm@22b0000 { clocks = <&clks IMX6SX_CLK_PWM8>, <&clks IMX6SX_CLK_PWM8>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 265bf4108cb6..64c2d1e9f7fc 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -228,6 +228,7 @@ display_out: endpoint { }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts index 5d3805b07032..a0bbec57ddc7 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -168,6 +168,7 @@ &pwm4 { }; &pwm5 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm5>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts index 9f63706383a7..a0097da03f38 100644 --- a/arch/arm/boot/dts/imx6ul-geam.dts +++ b/arch/arm/boot/dts/imx6ul-geam.dts @@ -195,6 +195,7 @@ timing0: timing0 { }; &pwm8 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm8>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi index 18966350bfd8..935a77d717a6 100644 --- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi +++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi @@ -155,6 +155,7 @@ lcdif_out: endpoint { }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi index cc9adce638f5..14fc4828ba4e 100644 --- a/arch/arm/boot/dts/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi @@ -187,6 +187,7 @@ timing0: timing0 { }; &pwm8 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm8>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts index 5bad29683cc3..5bfad4655b22 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts @@ -41,6 +41,7 @@ &lcdif { }; &pwm7 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm7>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi index f05e91841202..239124fc3093 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi @@ -153,6 +153,7 @@ rtc@32 { }; &pwm8 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm8>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi index df1da98ab10f..357ffb2f5ad6 100644 --- a/arch/arm/boot/dts/imx6ul-pico.dtsi +++ b/arch/arm/boot/dts/imx6ul-pico.dtsi @@ -175,6 +175,7 @@ display_out: endpoint { }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index bb6dbfd5546b..938a32ced88d 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -549,7 +549,6 @@ ETQ570 { &pwm5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm5>; - #pwm-cells = <3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 5379a03391bd..2b088f210331 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -131,16 +131,6 @@ ipp_di1: clock-di1 { clock-output-names = "ipp_di1"; }; - tempmon: tempmon { - compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; - interrupt-parent = <&gpc>; - interrupts = ; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; - }; - pmu { compatible = "arm,cortex-a7-pmu"; interrupt-parent = <&gpc>; @@ -351,6 +341,31 @@ sai3: sai@2030000 { dma-names = "rx", "tx"; status = "disabled"; }; + + asrc: asrc@2034000 { + compatible = "fsl,imx6ul-asrc", "fsl,imx53-asrc"; + reg = <0x2034000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ASRC_IPG>, + <&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>, + <&clks IMX6UL_CLK_SPBA>; + clock-names = "mem", "ipg", "asrck_0", + "asrck_1", "asrck_2", "asrck_3", "asrck_4", + "asrck_5", "asrck_6", "asrck_7", "asrck_8", + "asrck_9", "asrck_a", "asrck_b", "asrck_c", + "asrck_d", "asrck_e", "asrck_f", "spba"; + dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>, + <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; + dma-names = "rxa", "rxb", "rxc", + "txa", "txb", "txc"; + fsl,asrc-rate = <48000>; + fsl,asrc-width = <16>; + status = "okay"; + }; }; tsc: tsc@2040000 { @@ -371,7 +386,7 @@ pwm1: pwm@2080000 { clocks = <&clks IMX6UL_CLK_PWM1>, <&clks IMX6UL_CLK_PWM1>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -382,7 +397,7 @@ pwm2: pwm@2084000 { clocks = <&clks IMX6UL_CLK_PWM2>, <&clks IMX6UL_CLK_PWM2>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -393,7 +408,7 @@ pwm3: pwm@2088000 { clocks = <&clks IMX6UL_CLK_PWM3>, <&clks IMX6UL_CLK_PWM3>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -404,7 +419,7 @@ pwm4: pwm@208c000 { clocks = <&clks IMX6UL_CLK_PWM4>, <&clks IMX6UL_CLK_PWM4>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -612,6 +627,16 @@ reg_soc: regulator-vddsoc { anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; + interrupt-parent = <&gpc>; + interrupts = ; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usbphy@20c9000 { @@ -734,7 +759,7 @@ pwm5: pwm@20f0000 { clocks = <&clks IMX6UL_CLK_PWM5>, <&clks IMX6UL_CLK_PWM5>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -745,7 +770,7 @@ pwm6: pwm@20f4000 { clocks = <&clks IMX6UL_CLK_PWM6>, <&clks IMX6UL_CLK_PWM6>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -756,7 +781,7 @@ pwm7: pwm@20f8000 { clocks = <&clks IMX6UL_CLK_PWM7>, <&clks IMX6UL_CLK_PWM7>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -767,7 +792,7 @@ pwm8: pwm@20fc000 { clocks = <&clks IMX6UL_CLK_PWM8>, <&clks IMX6UL_CLK_PWM8>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -861,7 +886,7 @@ fec1: ethernet@2188000 { status = "disabled"; }; - usdhc1: usdhc@2190000 { + usdhc1: mmc@2190000 { compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; reg = <0x02190000 0x4000>; interrupts = ; @@ -875,7 +900,7 @@ usdhc1: usdhc@2190000 { status = "disabled"; }; - usdhc2: usdhc@2194000 { + usdhc2: mmc@2194000 { compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; reg = <0x02194000 0x4000>; interrupts = ; @@ -948,7 +973,7 @@ weim: weim@21b8000 { status = "disabled"; }; - ocotp: ocotp-ctrl@21bc000 { + ocotp: efuse@21bc000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,imx6ul-ocotp", "syscon"; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 9145c536d71a..6cf95939121d 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -145,25 +145,21 @@ &lcdif { &pwm4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; - #pwm-cells = <3>; }; &pwm5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm5>; - #pwm-cells = <3>; }; &pwm6 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm6>; - #pwm-cells = <3>; }; &pwm7 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm7>; - #pwm-cells = <3>; }; &sdma { diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts new file mode 100644 index 000000000000..ecbb2cc5b9ab --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Linumiz + * Author: Parthiban Nallathambi + */ + +/dts-v1/; +#include "imx6ull.dtsi" +#include "imx6ull-myir-mys-6ulx.dtsi" + +/ { + model = "MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND"; + compatible = "myir,imx6ull-mys-6ulx-eval", "fsl,imx6ull"; +}; + +&gpmi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi new file mode 100644 index 000000000000..d03694feaf5c --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Linumiz + * Author: Parthiban Nallathambi + */ + +#include +#include +#include + +/ { + model = "MYiR MYS-6ULX Single Board Computer"; + compatible = "fsl,imx6ull"; + + chosen { + stdout-path = &uart1; + }; + + reg_vdd_5v: regulator-vdd-5v { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_vdd_3v3: regulator-vdd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_vdd_5v>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + phy-supply = <®_vdd_3v3>; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_vdd_3v3>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <8>; + non-removable; + keep-power-in-suspend; + vmmc-supply = <®_vdd_3v3>; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170b9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170b9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170b9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index f6bb35d3ce51..1cfaf410aa43 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -147,16 +147,6 @@ replicator_in_port0: endpoint { }; }; - tempmon: tempmon { - compatible = "fsl,imx7d-tempmon"; - interrupt-parent = <&gpc>; - interrupts = ; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&fuse_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; - }; - timer { compatible = "arm,armv7-timer"; interrupt-parent = <&intc>; @@ -536,7 +526,7 @@ csi_mux_to_csi: endpoint { }; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,imx7d-ocotp", "syscon"; @@ -586,6 +576,16 @@ reg_1p2: regulator-vdd1p2 { anatop-max-voltage = <1300000>; anatop-enable-bit = <0>; }; + + tempmon: tempmon { + compatible = "fsl,imx7d-tempmon"; + interrupt-parent = <&gpc>; + interrupts = ; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&fuse_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; + }; }; snvs: snvs@30370000 { @@ -1126,7 +1126,7 @@ usbmisc3: usbmisc@30b30200 { reg = <0x30b30200 0x200>; }; - usdhc1: usdhc@30b40000 { + usdhc1: mmc@30b40000 { compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b40000 0x10000>; interrupts = ; @@ -1138,7 +1138,7 @@ usdhc1: usdhc@30b40000 { status = "disabled"; }; - usdhc2: usdhc@30b50000 { + usdhc2: mmc@30b50000 { compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b50000 0x10000>; interrupts = ; @@ -1150,7 +1150,7 @@ usdhc2: usdhc@30b50000 { status = "disabled"; }; - usdhc3: usdhc@30b60000 { + usdhc3: mmc@30b60000 { compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b60000 0x10000>; interrupts = ; diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index f7c4878534c8..367439639da9 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -452,7 +452,7 @@ sim: sim@410a3000 { reg = <0x410a3000 0x1000>; }; - ocotp: ocotp-ctrl@410a6000 { + ocotp: efuse@410a6000 { compatible = "fsl,imx7ulp-ocotp", "syscon"; reg = <0x410a6000 0x4000>; clocks = <&scg1 IMX7ULP_CLK_DUMMY>; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 760a68c163c8..069af9a19bb6 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -59,6 +59,7 @@ aliases { ethernet0 = &enet0; ethernet1 = &enet1; ethernet2 = &enet2; + rtc1 = &ftm_alarm0; serial0 = &lpuart0; serial1 = &lpuart1; serial2 = &lpuart2; @@ -772,7 +773,7 @@ ptp_clock@2d10e00 { fsl,tmr-prsc = <2>; fsl,tmr-add = <0xaaaaaaab>; fsl,tmr-fiper1 = <999999995>; - fsl,tmr-fiper2 = <99990>; + fsl,tmr-fiper2 = <999999995>; fsl,max-adj = <499999999>; fsl,extts-fifo; }; @@ -1002,5 +1003,19 @@ qdma: dma-controller@8390000 { big-endian; }; + rcpm: power-controller@1ee2140 { + compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1ee2140 0x0 0x8>; + #fsl,rcpm-wakeup-cells = <2>; + }; + + ftm_alarm0: timer0@29d0000 { + compatible = "fsl,ls1021a-ftm-alarm"; + reg = <0x0 0x29d0000 0x0 0x10000>; + reg-names = "ftm"; + fsl,rcpm-wakeup = <&rcpm 0x20000 0x0>; + interrupts = ; + big-endian; + }; }; }; diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts index ce1920c052fc..64e0e9509226 100644 --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -158,6 +158,8 @@ fixed-link { mdio1: mdio { #address-cells = <1>; #size-cells = <0>; + clock-frequency = <12500000>; + suppress-preamble; status = "okay"; switch0: switch0@0 { diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index 778e02c000d1..de79dcfd32e6 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -164,7 +164,7 @@ port@4 { port@9 { reg = <9>; label = "sff2"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff2>; }; diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index 95d0060fb56c..f8299f33a692 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -137,6 +137,8 @@ fixed-link { mdio1: mdio { #address-cells = <1>; #size-cells = <0>; + clock-frequency = <12500000>; + suppress-preamble; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts index b642520199ba..040a1f8b6130 100644 --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts @@ -186,7 +186,7 @@ ports { port@2 { reg = <2>; label = "eth_fc_1000_2"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff1>; }; @@ -194,7 +194,7 @@ port@2 { port@3 { reg = <3>; label = "eth_fc_1000_3"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff2>; }; @@ -202,7 +202,7 @@ port@3 { port@4 { reg = <4>; label = "eth_fc_1000_4"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff3>; }; @@ -210,7 +210,7 @@ port@4 { port@5 { reg = <5>; label = "eth_fc_1000_5"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff4>; }; @@ -218,7 +218,7 @@ port@5 { port@6 { reg = <6>; label = "eth_fc_1000_6"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff5>; }; @@ -226,7 +226,7 @@ port@6 { port@7 { reg = <7>; label = "eth_fc_1000_7"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff6>; }; @@ -234,7 +234,7 @@ port@7 { port@9 { reg = <9>; label = "eth_fc_1000_1"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff0>; }; @@ -269,7 +269,7 @@ ports { port@2 { reg = <2>; label = "eth_fc_1000_8"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff7>; }; @@ -277,7 +277,7 @@ port@2 { port@3 { reg = <3>; label = "eth_fc_1000_9"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff8>; }; @@ -285,7 +285,7 @@ port@3 { port@4 { reg = <4>; label = "eth_fc_1000_10"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff9>; }; diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts index 55b4201e27f6..9e5187ba3fa6 100644 --- a/arch/arm/boot/dts/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts @@ -119,6 +119,8 @@ fixed-link { mdio1: mdio { #address-cells = <1>; #size-cells = <0>; + clock-frequency = <12500000>; + suppress-preamble; status = "okay"; switch0: switch0@0 { @@ -207,6 +209,18 @@ eeprom@52 { }; }; +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + }; +}; + &snvsrtc { status = "disabled"; }; @@ -324,6 +338,13 @@ VF610_PAD_PTB15__I2C0_SDA 0x37ff >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + pinctrl_leds_debug: pinctrl-leds-debug { fsl,pins = < VF610_PAD_PTD3__GPIO_82 0x31c2 diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts index a6c22a79779e..569614b08f04 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts @@ -81,6 +81,8 @@ &esdhc0 { non-removable; no-1-8-v; keep-power-in-suspend; + no-sdio; + no-sd; status = "okay"; }; @@ -88,6 +90,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; + no-sdio; status = "okay"; }; @@ -105,6 +108,8 @@ fixed-link { mdio1: mdio { #address-cells = <1>; #size-cells = <0>; + clock-frequency = <12500000>; + suppress-preamble; status = "okay"; switch0: switch0@0 { diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts index 3d05c894bdc0..b6b0f302b7b4 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -133,6 +133,8 @@ fixed-link { mdio1: mdio { #address-cells = <1>; #size-cells = <0>; + clock-frequency = <12500000>; + suppress-preamble; status = "okay"; switch0: switch0@0 { @@ -226,6 +228,18 @@ eeprom@52 { }; }; +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + }; +}; + &snvsrtc { status = "disabled"; }; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 7fd39817f8ab..956182d08e74 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -10,7 +10,7 @@ &a5_cpu { }; &aips0 { - L2: l2-cache@40006000 { + L2: cache-controller@40006000 { compatible = "arm,pl310-cache"; reg = <0x40006000 0x1000>; cache-unified; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 2d547e7b21ad..0fe03aa0367f 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -729,6 +729,28 @@ i2c3: i2c@400e7000 { dma-names = "rx","tx"; status = "disabled"; }; + + crypto: crypto@400f0000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x400f0000 0x9000>; + ranges = <0 0x400f0000 0x9000>; + clocks = <&clks VF610_CLK_CAAM>; + clock-names = "ipg"; + + sec_jr0: jr0@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <102 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr1@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <102 IRQ_TYPE_LEVEL_HIGH>; + }; + }; }; }; }; diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c index b4d9db9d5bf1..ca747712400f 100644 --- a/drivers/clk/imx/clk-imx8mp.c +++ b/drivers/clk/imx/clk-imx8mp.c @@ -680,6 +680,7 @@ static int imx8mp_clocks_probe(struct platform_device *pdev) hws[IMX8MP_CLK_I2C2_ROOT] = imx_clk_hw_gate4("i2c2_root_clk", "i2c2", ccm_base + 0x4180, 0); hws[IMX8MP_CLK_I2C3_ROOT] = imx_clk_hw_gate4("i2c3_root_clk", "i2c3", ccm_base + 0x4190, 0); hws[IMX8MP_CLK_I2C4_ROOT] = imx_clk_hw_gate4("i2c4_root_clk", "i2c4", ccm_base + 0x41a0, 0); + hws[IMX8MP_CLK_MU_ROOT] = imx_clk_hw_gate4("mu_root_clk", "ipg_root", ccm_base + 0x4210, 0); hws[IMX8MP_CLK_OCOTP_ROOT] = imx_clk_hw_gate4("ocotp_root_clk", "ipg_root", ccm_base + 0x4220, 0); hws[IMX8MP_CLK_PCIE_ROOT] = imx_clk_hw_gate4("pcie_root_clk", "pcie_aux", ccm_base + 0x4250, 0); hws[IMX8MP_CLK_PWM1_ROOT] = imx_clk_hw_gate4("pwm1_root_clk", "pwm1", ccm_base + 0x4280, 0); diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c index cd04e7dc1878..5129ef8e1d6e 100644 --- a/drivers/clk/imx/clk-vf610.c +++ b/drivers/clk/imx/clk-vf610.c @@ -438,6 +438,7 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_SNVS] = imx_clk_gate2("snvs-rtc", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(7)); clk[VF610_CLK_DAP] = imx_clk_gate("dap", "platform_bus", CCM_CCSR, 24); clk[VF610_CLK_OCOTP] = imx_clk_gate("ocotp", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(5)); + clk[VF610_CLK_CAAM] = imx_clk_gate2("caam", "ipg_bus", CCM_CCGR11, CCM_CCGRx_CGn(0)); imx_check_clocks(clk, ARRAY_SIZE(clk)); diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h index 95394f35a74a..0f2d60e884dc 100644 --- a/include/dt-bindings/clock/vf610-clock.h +++ b/include/dt-bindings/clock/vf610-clock.h @@ -195,6 +195,7 @@ #define VF610_CLK_WKPU 186 #define VF610_CLK_TCON0 187 #define VF610_CLK_TCON1 188 -#define VF610_CLK_END 189 +#define VF610_CLK_CAAM 189 +#define VF610_CLK_END 190 #endif /* __DT_BINDINGS_CLOCK_VF610_H */