From d2aa060d40fa060e963f9a356d43481e43ba3dac Mon Sep 17 00:00:00 2001 From: Huy Nguyen Date: Tue, 26 Sep 2017 15:11:56 -0500 Subject: [PATCH] net/mlx5: Cancel health poll before sending panic teardown command After the panic teardown firmware command, health_care detects the error in PCI bus and calls the mlx5_pci_err_detected. This health_care flow is no longer needed because the panic teardown firmware command will bring down the PCI bus communication with the HCA. The solution is to cancel the health care timer and its pending workqueue request before sending panic teardown firmware command. Kernel trace: mlx5_core 0033:01:00.0: Shutdown was called mlx5_core 0033:01:00.0: health_care:154:(pid 9304): handling bad device here mlx5_core 0033:01:00.0: mlx5_handle_bad_state:114:(pid 9304): NIC state 1 mlx5_core 0033:01:00.0: mlx5_pci_err_detected was called mlx5_core 0033:01:00.0: mlx5_enter_error_state:96:(pid 9304): start mlx5_3:mlx5_ib_event:3061:(pid 9304): warning: event on port 0 mlx5_core 0033:01:00.0: mlx5_enter_error_state:104:(pid 9304): end Unable to handle kernel paging request for data at address 0x0000003f Faulting instruction address: 0xc0080000434b8c80 Fixes: 8812c24d28f4 ('net/mlx5: Add fast unload support in shutdown flow') Signed-off-by: Huy Nguyen Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 0d2c8dcd6eae..06562c9a6b9c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1482,9 +1482,16 @@ static int mlx5_try_fast_unload(struct mlx5_core_dev *dev) return -EAGAIN; } + /* Panic tear down fw command will stop the PCI bus communication + * with the HCA, so the health polll is no longer needed. + */ + mlx5_drain_health_wq(dev); + mlx5_stop_health_poll(dev); + ret = mlx5_cmd_force_teardown_hca(dev); if (ret) { mlx5_core_dbg(dev, "Firmware couldn't do fast unload error: %d\n", ret); + mlx5_start_health_poll(dev); return ret; }