openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

watchdog: ziirave_wdt: Don't try to program readonly flash 

Bootloader code will ignore any attempts to write data to any flash
area outside of [ZIIRAVE_FIRM_FLASH_MEMORY_START;
ZIIRAVE_FIRM_FLASH_MEMORY_END]. Firmware update code already have an
appropriate check to skip those areas when validating updated
firmware. Firmware programming code, OTOH, does not and will
needlessly send no-op I2C traffic. Add an appropriate check to
__ziirave_firm_write_pkt() so as to save all of that wasted effort.

While at it, normalize all of the address handling code to use full
32-bit address in units of bytes and convert it to an appropriate
value only in places where that is necessary.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Rick Ramstetter <rick@anteaterllc.com>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190812200906.31344-15-andrew.smirnov@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This commit is contained in:
Andrey Smirnov 2019-08-12 13:08:58 -07:00 committed by Wim Van Sebroeck
parent de88053807
commit d2ddc4505e
1 changed files with 24 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

33
drivers/watchdog/ziirave_wdt.c
View File

@ -51,8 +51,8 @@ static char *ziirave_reasons[] = {"power cycle", "hw watchdog", NULL, NULL,
#define ZIIRAVE_FIRM_PKT_TOTAL_SIZE 20
#define ZIIRAVE_FIRM_PKT_DATA_SIZE 16
#define ZIIRAVE_FIRM_FLASH_MEMORY_START 0x1600
#define ZIIRAVE_FIRM_FLASH_MEMORY_END 0x2bbf
#define ZIIRAVE_FIRM_FLASH_MEMORY_START (2 * 0x1600)
#define ZIIRAVE_FIRM_FLASH_MEMORY_END (2 * 0x2bbf)
#define ZIIRAVE_FIRM_PAGE_SIZE 128
/* Received and ready for next Download packet. */
@ -195,12 +195,13 @@ static int ziirave_firm_wait_for_ack(struct watchdog_device *wdd)
return ret == ZIIRAVE_FIRM_DOWNLOAD_ACK ? 0 : -EIO;
}
static int ziirave_firm_set_read_addr(struct watchdog_device *wdd, u16 addr)
static int ziirave_firm_set_read_addr(struct watchdog_device *wdd, u32 addr)
{
struct i2c_client *client = to_i2c_client(wdd->parent);
const u16 addr16 = (u16)addr / 2;
u8 address[2];
put_unaligned_le16(addr, address);
put_unaligned_le16(addr16, address);
return i2c_smbus_write_block_data(client,
ZIIRAVE_CMD_DOWNLOAD_SET_READ_ADDR,
@ -234,6 +235,12 @@ static int ziirave_firm_write_byte(struct watchdog_device *wdd, u8 command,
wait_for_ack);
}
static bool ziirave_firm_addr_readonly(u32 addr)
{
return addr < ZIIRAVE_FIRM_FLASH_MEMORY_START ||
addr > ZIIRAVE_FIRM_FLASH_MEMORY_END;
}
/*
* ziirave_firm_write_pkt() - Build and write a firmware packet
*
@ -261,6 +268,16 @@ static int __ziirave_firm_write_pkt(struct watchdog_device *wdd,
return -EMSGSIZE;
}
/*
* Ignore packets that are targeting program memory outisde of
* app partition, since they will be ignored by the
* bootloader. At the same time, we need to make sure we'll
* allow zero length packet that will be sent as the last step
* of firmware update
*/
if (len && ziirave_firm_addr_readonly(addr))
return 0;
/* Packet length */
packet[0] = len;
/* Packet address */
@ -279,7 +296,7 @@ static int __ziirave_firm_write_pkt(struct watchdog_device *wdd,
if (ret)
dev_err(&client->dev,
"Failed to write firmware packet at address 0x%04x: %d\n",
addr16, ret);
addr, ret);
return ret;
}
@ -315,14 +332,12 @@ static int ziirave_firm_verify(struct watchdog_device *wdd,
const struct ihex_binrec *rec;
int i, ret;
u8 data[ZIIRAVE_FIRM_PKT_DATA_SIZE];
u16 addr;
for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) {
const u16 len = be16_to_cpu(rec->len);
const u32 addr = be32_to_cpu(rec->addr);
addr = (be32_to_cpu(rec->addr) & 0xffff) >> 1;
if (addr < ZIIRAVE_FIRM_FLASH_MEMORY_START ||
addr > ZIIRAVE_FIRM_FLASH_MEMORY_END)
if (ziirave_firm_addr_readonly(addr))
continue;
ret = ziirave_firm_set_read_addr(wdd, addr);