- New Drivers

- Add support for Cherry Trail Dollar Cove TI PMIC
    - Add support for Add Spreadtrum SC27xx series PMICs
 
  - New Device Support
    - Add support Regulator to axp20x
 
  - New Functionality
    - Add DT support; aspeed-scu sc27xx-pmic
    - Add power saving support; rts5249
 
  - Fix-ups
    - DT clean-up/rework; tps65217, max77693, iproc-cdru, iproc-mhb, tps65218
    - Staticise/constify; stw481x
    - Use new succinct IRQ API; fsl-imx25-tsadc
    - Kconfig fix-ups; MFD_TPS65218
    - Identify SPI method; lpc_ich
    - Use managed resources (devm_*) calls; ssbi
    - Remove unused/obsolete code/documentation; mc13xxx
 
  - Bug Fixes
    - Fix typo in MAINTAINERS
    - Fix error handling; mxs-lradc
    - Clean-up IRQs on .remove; fsl-imx25-tsadc
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJaDaBsAAoJEFGvii+H/HdhfGUP/itBfs94YdkUeDFyWzfbg6ib
 X1t+3mXhPQiVAt91EBwl6JD7FQgdqoB/g4pNf937bFQ+Rm8Sd4R/a5J1KQ8Zta4H
 QaMmlhi6Fy5NWh2gmjuC3KoGOeXz9zAaaDH3SeAs98XCN55Akf6Tt1Us2Wp9VHkq
 PoMfwZXlqb4KggvEaraQS4QvTVXuKIoq49LmqUMxBhInMwoT9qwiI/PSWDfirzQk
 TLA3LOEjLpRKZQuHR+kovQOU2wnwmiOhBFuVuaYixPqDYFvm3/2KtuPKW79KzQPX
 vsi7/x4ShPB55extHPhuoRkjbp/7gvZQS2iW5NufJfrcu3m1kEnu5DLAB6e+4SHs
 ZE52MviFrCFoAXyXRvHBdzqgGKEzq2Jhlse4j+HRXVLOzIW8PzVM4MkZvfVFcqYx
 4BQuxdM6+oUGAqeKlmydaMTng8o/UfRainQ1dIGAblk5DCR+SHxqt582f9qyLAhT
 55OMFJG/bQ4cW86EXWtp+8DUA4Aoz5ZIJ+C5IrYKOA2ScQo//imoH5Hz1PH1m91O
 GebDdw7AijGLbSqXSu4aRfFe9+Whyo2387A+1Zd9zdfLyiOQ1n5ty6ClRsCfDJ8P
 K4ONmZL7H5n8I8j3eyivn+k1MelIdfG0hB8YS0NnYvR3pR9AY1NWCgO0f4rfyU9o
 whyvIqg22EepnbEJjjFv
 =LAK+
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New drivers:
   - Add support for Cherry Trail Dollar Cove TI PMIC
   - Add support for Add Spreadtrum SC27xx series PMICs

  New device support:
   - Add support Regulator to axp20x

  New functionality:
   - Add DT support; aspeed-scu sc27xx-pmic
   - Add power saving support; rts5249

  Fix-ups:
   - DT clean-up/rework; tps65217, max77693, iproc-cdru, iproc-mhb, tps65218
   - Staticise/constify; stw481x
   - Use new succinct IRQ API; fsl-imx25-tsadc
   - Kconfig fix-ups; MFD_TPS65218
   - Identify SPI method; lpc_ich
   - Use managed resources (devm_*) calls; ssbi
   - Remove unused/obsolete code/documentation; mc13xxx

  Bug fixes:
   - Fix typo in MAINTAINERS
   - Fix error handling; mxs-lradc
   - Clean-up IRQs on .remove; fsl-imx25-tsadc"

* tag 'mfd-next-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (21 commits)
  dt-bindings: mfd: mc13xxx: Remove obsolete property
  mfd: axp20x: Add axp20x-regulator cell for AXP813
  mfd: Add Spreadtrum SC27xx series PMICs driver
  dt-bindings: mfd: Add Spreadtrum SC27xx PMIC documentation
  mfd: ssbi: Use devm_of_platform_populate()
  mfd: fsl-imx25: Clean up irq settings during removal
  mfd: mxs-lradc: Fix error handling in mxs_lradc_probe()
  mfd: lpc_ich: Avoton/Rangeley uses SPI_BYT method
  mfd: tps65218: Introduce dependency on CONFIG_OF
  mfd: tps65218: Correct the config description
  MAINTAINERS: Fix Dialog search term for watchdog binding file
  mfd: fsl-imx25: Set irq handler and data in one go
  mfd: rts5249: Add support for RTS5250S power saving
  ACPI / PMIC: Add opregion driver for Intel Dollar Cove TI PMIC
  mfd: Add support for Cherry Trail Dollar Cove TI PMIC
  syscon: dt-bindings: Add binding document for iProc MHB block
  syscon: dt-bindings: Add binding doc for Broadcom iProc CDRU
  mfd: max77693: Add muic of_compatible in mfd_cell
  mfd: stw481x: Make three arrays static const, reduces object code size
  mfd: tps65217: Introduce dependency on CONFIG_OF
  ...

Documentation/devicetree/bindings/mfd/aspeed-scu.txt

@@ -9,10 +9,16 @@ Required properties:
 		"aspeed,g5-scu", "syscon", "simple-mfd"
 
 - reg:		contains the offset and length of the SCU memory region
+- #clock-cells: should be set to <1> - the system controller is also a
+	clock provider
+- #reset-cells: should be set to <1> - the system controller is also a
+	reset line provider
 
 Example:
 
 syscon: syscon@1e6e2000 {
 	compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
 	reg = <0x1e6e2000 0x1a8>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
 };

Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt

@@ -0,0 +1,16 @@
+Broadcom iProc Chip Device Resource Unit (CDRU)
+
+Various Broadcom iProc SoCs have a set of registers that provide various
+chip specific device and resource configurations. This node allows access to
+these CDRU registers via syscon.
+
+Required properties:
+- compatible: should contain:
+		"brcm,sr-cdru", "syscon" for Stingray
+- reg: base address and range of the CDRU registers
+
+Example:
+	cdru: syscon@6641d000 {
+		compatible = "brcm,sr-cdru", "syscon";
+		reg = <0 0x6641d000 0 0x400>;
+	};

Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt

@@ -0,0 +1,18 @@
+Broadcom iProc Multi Host Bridge (MHB)
+
+Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls
+the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint
+interface; 3) access to the Nitro (network processing) engine
+
+This node allows access to these MHB registers via syscon.
+
+Required properties:
+- compatible: should contain:
+		"brcm,sr-mhb", "syscon" for Stingray
+- reg: base address and range of the MHB registers
+
+Example:
+	mhb: syscon@60401000 {
+		compatible = "brcm,sr-mhb", "syscon";
+		reg = <0 0x60401000 0 0x38c>;
+	};

Documentation/devicetree/bindings/mfd/max77693.txt

@@ -127,6 +127,12 @@ Required properties for the LED child node:
 Optional properties for the LED child node:
 - label : see Documentation/devicetree/bindings/leds/common.txt
 
+Optional nodes:
+- max77693-muic :
+	Node used only by extcon consumers.
+	Required properties:
+		- compatible : "maxim,max77693-muic"
+
 Example:
 #include <dt-bindings/leds/common.h>
 

Documentation/devicetree/bindings/mfd/mc13xxx.txt

@@ -113,7 +113,6 @@ MC13892 regulators:
 Examples:
 
 ecspi@70010000 { /* ECSPI1 */
-	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
 		   <&gpio4 25 0>; /* GPIO4_25 */
 

Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt

@@ -0,0 +1,40 @@
+Spreadtrum SC27xx Power Management Integrated Circuit (PMIC)
+
+The Spreadtrum SC27xx series PMICs contain SC2720, SC2721, SC2723, SC2730
+and SC2731. The Spreadtrum PMIC belonging to SC27xx series integrates all
+mobile handset power management, audio codec, battery management and user
+interface support function in a single chip. It has 6 major functional
+blocks:
+- DCDCs to support CPU, memory.
+- LDOs to support both internal and external requirement.
+- Battery management system, such as charger, fuel gauge.
+- Audio codec.
+- User interface function, such as indicator, flash LED and so on.
+- IC level interface, such as power on/off control, RTC and typec and so on.
+
+Required properties:
+- compatible: Should be one of the following:
+	"sprd,sc2720"
+	"sprd,sc2721"
+	"sprd,sc2723"
+	"sprd,sc2730"
+	"sprd,sc2731"
+- reg: The address of the device chip select, should be 0.
+- spi-max-frequency: Typically set to 26000000.
+- interrupts: The interrupt line the device is connected to.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: The number of cells to describe an PMIC IRQ, must be 2.
+- #address-cells: Child device offset number of cells, must be 1.
+- #size-cells: Child device size number of cells, must be 0.
+
+Example:
+pmic@0 {
+	compatible = "sprd,sc2731";
+	reg = <0>;
+	spi-max-frequency = <26000000>;
+	interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};

MAINTAINERS

@@ -4146,7 +4146,7 @@ F:	Documentation/devicetree/bindings/mfd/da90*.txt
 F:	Documentation/devicetree/bindings/input/da90??-onkey.txt
 F:	Documentation/devicetree/bindings/thermal/da90??-thermal.txt
 F:	Documentation/devicetree/bindings/regulator/da92*.txt
-F:	Documentation/devicetree/bindings/watchdog/da92??-wdt.txt
+F:	Documentation/devicetree/bindings/watchdog/da90??-wdt.txt
 F:	Documentation/devicetree/bindings/sound/da[79]*.txt
 F:	drivers/gpio/gpio-da90??.c
 F:	drivers/hwmon/da90??-hwmon.c

drivers/acpi/Kconfig

@@ -527,6 +527,12 @@ config CHT_WC_PMIC_OPREGION
 	help
 	  This config adds ACPI operation region support for CHT Whiskey Cove PMIC.
 
+config CHT_DC_TI_PMIC_OPREGION
+	bool "ACPI operation region support for Dollar Cove TI PMIC"
+	depends on INTEL_SOC_PMIC_CHTDC_TI
+	help
+	  This config adds ACPI operation region support for Dollar Cove TI PMIC.
+
 endif
 
 config ACPI_CONFIGFS

drivers/acpi/Makefile

@@ -106,6 +106,7 @@ obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
 obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
 obj-$(CONFIG_BXT_WC_PMIC_OPREGION) += pmic/intel_pmic_bxtwc.o
 obj-$(CONFIG_CHT_WC_PMIC_OPREGION) += pmic/intel_pmic_chtwc.o
+obj-$(CONFIG_CHT_DC_TI_PMIC_OPREGION) += pmic/intel_pmic_chtdc_ti.o
 
 obj-$(CONFIG_ACPI_CONFIGFS)	+= acpi_configfs.o
 

drivers/acpi/pmic/intel_pmic_chtdc_ti.c

@@ -0,0 +1,137 @@
+/*
+ * Dollar Cove TI PMIC operation region driver
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * Rewritten and cleaned up
+ * Copyright (C) 2017 Takashi Iwai <tiwai@suse.de>
+ */
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/platform_device.h>
+#include "intel_pmic.h"
+
+/* registers stored in 16bit BE (high:low, total 10bit) */
+#define CHTDC_TI_VBAT		0x54
+#define CHTDC_TI_DIETEMP	0x56
+#define CHTDC_TI_BPTHERM	0x58
+#define CHTDC_TI_GPADC		0x5a
+
+static struct pmic_table chtdc_ti_power_table[] = {
+	{ .address = 0x00, .reg = 0x41 },
+	{ .address = 0x04, .reg = 0x42 },
+	{ .address = 0x08, .reg = 0x43 },
+	{ .address = 0x0c, .reg = 0x45 },
+	{ .address = 0x10, .reg = 0x46 },
+	{ .address = 0x14, .reg = 0x47 },
+	{ .address = 0x18, .reg = 0x48 },
+	{ .address = 0x1c, .reg = 0x49 },
+	{ .address = 0x20, .reg = 0x4a },
+	{ .address = 0x24, .reg = 0x4b },
+	{ .address = 0x28, .reg = 0x4c },
+	{ .address = 0x2c, .reg = 0x4d },
+	{ .address = 0x30, .reg = 0x4e },
+};
+
+static struct pmic_table chtdc_ti_thermal_table[] = {
+	{
+		.address = 0x00,
+		.reg = CHTDC_TI_GPADC
+	},
+	{
+		.address = 0x0c,
+		.reg = CHTDC_TI_GPADC
+	},
+	/* TMP2 -> SYSTEMP */
+	{
+		.address = 0x18,
+		.reg = CHTDC_TI_GPADC
+	},
+	/* TMP3 -> BPTHERM */
+	{
+		.address = 0x24,
+		.reg = CHTDC_TI_BPTHERM
+	},
+	{
+		.address = 0x30,
+		.reg = CHTDC_TI_GPADC
+	},
+	/* TMP5 -> DIETEMP */
+	{
+		.address = 0x3c,
+		.reg = CHTDC_TI_DIETEMP
+	},
+};
+
+static int chtdc_ti_pmic_get_power(struct regmap *regmap, int reg, int bit,
+				   u64 *value)
+{
+	int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	*value = data & 1;
+	return 0;
+}
+
+static int chtdc_ti_pmic_update_power(struct regmap *regmap, int reg, int bit,
+				      bool on)
+{
+	return regmap_update_bits(regmap, reg, 1, on);
+}
+
+static int chtdc_ti_pmic_get_raw_temp(struct regmap *regmap, int reg)
+{
+	u8 buf[2];
+
+	if (regmap_bulk_read(regmap, reg, buf, 2))
+		return -EIO;
+
+	/* stored in big-endian */
+	return ((buf[0] & 0x03) << 8) | buf[1];
+}
+
+static struct intel_pmic_opregion_data chtdc_ti_pmic_opregion_data = {
+	.get_power = chtdc_ti_pmic_get_power,
+	.update_power = chtdc_ti_pmic_update_power,
+	.get_raw_temp = chtdc_ti_pmic_get_raw_temp,
+	.power_table = chtdc_ti_power_table,
+	.power_table_count = ARRAY_SIZE(chtdc_ti_power_table),
+	.thermal_table = chtdc_ti_thermal_table,
+	.thermal_table_count = ARRAY_SIZE(chtdc_ti_thermal_table),
+};
+
+static int chtdc_ti_pmic_opregion_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+	int err;
+
+	err = intel_pmic_install_opregion_handler(&pdev->dev,
+			ACPI_HANDLE(pdev->dev.parent), pmic->regmap,
+			&chtdc_ti_pmic_opregion_data);
+	if (err < 0)
+		return err;
+
+	/* Re-enumerate devices depending on PMIC */
+	acpi_walk_dep_device_list(ACPI_HANDLE(pdev->dev.parent));
+	return 0;
+}
+
+static const struct platform_device_id chtdc_ti_pmic_opregion_id_table[] = {
+	{ .name = "chtdc_ti_region" },
+	{},
+};
+
+static struct platform_driver chtdc_ti_pmic_opregion_driver = {
+	.probe = chtdc_ti_pmic_opregion_probe,
+	.driver = {
+		.name = "cht_dollar_cove_ti_pmic",
+	},
+	.id_table = chtdc_ti_pmic_opregion_id_table,
+};
+module_platform_driver(chtdc_ti_pmic_opregion_driver);
+
+MODULE_DESCRIPTION("Dollar Cove TI PMIC opregion driver");
+MODULE_LICENSE("GPL v2");

drivers/mfd/Kconfig

@@ -510,6 +510,19 @@ config INTEL_SOC_PMIC_CHTWC
 	  available before any devices using it are probed. This option also
 	  causes the designware-i2c driver to be builtin for the same reason.
 
+config INTEL_SOC_PMIC_CHTDC_TI
+	tristate "Support for Intel Cherry Trail Dollar Cove TI PMIC"
+	depends on GPIOLIB
+	depends on I2C
+	depends on ACPI
+	depends on X86
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	  Select this option for supporting Dollar Cove (TI version) PMIC
+	  device that is found on some Intel Cherry Trail systems.
+
 config MFD_INTEL_LPSS
 	tristate
 	select COMMON_CLK
@@ -1057,6 +1070,22 @@ config MFD_SMSC
         To compile this driver as a module, choose M here: the
         module will be called smsc.
 
+config MFD_SC27XX_PMIC
+	tristate "Spreadtrum SC27xx PMICs"
+	depends on ARCH_SPRD || COMPILE_TEST
+	depends on SPI_MASTER
+	select MFD_CORE
+	select REGMAP_SPI
+	select REGMAP_IRQ
+	help
+	  This enables support for the Spreadtrum SC27xx PMICs with SPI
+	  interface. The SC27xx series PMICs integrate power management,
+	  audio codec, battery management and user interface support
+	  function (such as RTC, Typec, indicator and so on) in a single chip.
+
+	  This driver provides common support for accessing the SC27xx PMICs,
+	  and it also adds the irq_chip parts for handling the PMIC chip events.
+
 config ABX500_CORE
 	bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
 	default y if ARCH_U300 || ARCH_U8500 || COMPILE_TEST
@@ -1338,7 +1367,7 @@ config MFD_TPS65090
 
 config MFD_TPS65217
 	tristate "TI TPS65217 Power Management / White LED chips"
-	depends on I2C
+	depends on I2C && OF
 	select MFD_CORE
 	select REGMAP_I2C
 	select IRQ_DOMAIN
@@ -1400,7 +1429,7 @@ config MFD_TI_LP87565
 
 config MFD_TPS65218
 	tristate "TI TPS65218 Power Management chips"
-	depends on I2C
+	depends on I2C && OF
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -1408,8 +1437,7 @@ config MFD_TPS65218
 	  If you say yes here you get support for the TPS65218 series of
 	  Power Management chips.
 	  These include voltage regulators, gpio and other features
-	  that are often used in portable devices. Only regulator
+	  that are often used in portable devices.
-	  component is currently supported.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called tps65218.

drivers/mfd/Makefile

@@ -220,6 +220,7 @@ intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
 obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
 obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC)	+= intel_soc_pmic_bxtwc.o
 obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC)	+= intel_soc_pmic_chtwc.o
+obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI)	+= intel_soc_pmic_chtdc_ti.o
 obj-$(CONFIG_MFD_MT6397)	+= mt6397-core.o
 
 obj-$(CONFIG_MFD_ALTERA_A10SR)	+= altera-a10sr.o
@@ -228,3 +229,4 @@ obj-$(CONFIG_MFD_SUN4I_GPADC)	+= sun4i-gpadc.o
 obj-$(CONFIG_MFD_STM32_LPTIMER)	+= stm32-lptimer.o
 obj-$(CONFIG_MFD_STM32_TIMERS) 	+= stm32-timers.o
 obj-$(CONFIG_MFD_MXS_LRADC)     += mxs-lradc.o
+obj-$(CONFIG_MFD_SC27XX_PMIC)	+= sprd-sc27xx-spi.o

drivers/mfd/axp20x.c

@@ -876,6 +876,8 @@ static struct mfd_cell axp813_cells[] = {
 		.name			= "axp221-pek",
 		.num_resources		= ARRAY_SIZE(axp803_pek_resources),
 		.resources		= axp803_pek_resources,
+	}, {
+		.name			= "axp20x-regulator",
 	}
 };
 

drivers/mfd/fsl-imx25-tsadc.c

@@ -84,8 +84,7 @@ static int mx25_tsadc_setup_irq(struct platform_device *pdev,
 		return -ENOMEM;
 	}
 
-	irq_set_chained_handler(irq, mx25_tsadc_irq_handler);
+	irq_set_chained_handler_and_data(irq, mx25_tsadc_irq_handler, tsadc);
-	irq_set_handler_data(irq, tsadc);
 
 	return 0;
 }
@@ -180,6 +179,19 @@ static int mx25_tsadc_probe(struct platform_device *pdev)
 	return devm_of_platform_populate(dev);
 }
 
+static int mx25_tsadc_remove(struct platform_device *pdev)
+{
+	struct mx25_tsadc *tsadc = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (irq) {
+		irq_set_chained_handler_and_data(irq, NULL, NULL);
+		irq_domain_remove(tsadc->domain);
+	}
+
+	return 0;
+}
+
 static const struct of_device_id mx25_tsadc_ids[] = {
 	{ .compatible = "fsl,imx25-tsadc" },
 	{ /* Sentinel */ }
@@ -192,6 +204,7 @@ static struct platform_driver mx25_tsadc_driver = {
 		.of_match_table = of_match_ptr(mx25_tsadc_ids),
 	},
 	.probe = mx25_tsadc_probe,
+	.remove = mx25_tsadc_remove,
 };
 module_platform_driver(mx25_tsadc_driver);
 

drivers/mfd/intel_soc_pmic_chtdc_ti.c

@@ -0,0 +1,184 @@
+/*
+ * Device access for Dollar Cove TI PMIC
+ *
+ * Copyright (c) 2014, Intel Corporation.
+ *   Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
+ *
+ * Cleanup and forward-ported
+ *   Copyright (c) 2017 Takashi Iwai <tiwai@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#define CHTDC_TI_IRQLVL1	0x01
+#define CHTDC_TI_MASK_IRQLVL1	0x02
+
+/* Level 1 IRQs */
+enum {
+	CHTDC_TI_PWRBTN = 0,	/* power button */
+	CHTDC_TI_DIETMPWARN,	/* thermal */
+	CHTDC_TI_ADCCMPL,	/* ADC */
+	/* No IRQ 3 */
+	CHTDC_TI_VBATLOW = 4,	/* battery */
+	CHTDC_TI_VBUSDET,	/* power source */
+	/* No IRQ 6 */
+	CHTDC_TI_CCEOCAL = 7,	/* battery */
+};
+
+static struct resource power_button_resources[] = {
+	DEFINE_RES_IRQ(CHTDC_TI_PWRBTN),
+};
+
+static struct resource thermal_resources[] = {
+	DEFINE_RES_IRQ(CHTDC_TI_DIETMPWARN),
+};
+
+static struct resource adc_resources[] = {
+	DEFINE_RES_IRQ(CHTDC_TI_ADCCMPL),
+};
+
+static struct resource pwrsrc_resources[] = {
+	DEFINE_RES_IRQ(CHTDC_TI_VBUSDET),
+};
+
+static struct resource battery_resources[] = {
+	DEFINE_RES_IRQ(CHTDC_TI_VBATLOW),
+	DEFINE_RES_IRQ(CHTDC_TI_CCEOCAL),
+};
+
+static struct mfd_cell chtdc_ti_dev[] = {
+	{
+		.name = "chtdc_ti_pwrbtn",
+		.num_resources = ARRAY_SIZE(power_button_resources),
+		.resources = power_button_resources,
+	}, {
+		.name = "chtdc_ti_adc",
+		.num_resources = ARRAY_SIZE(adc_resources),
+		.resources = adc_resources,
+	}, {
+		.name = "chtdc_ti_thermal",
+		.num_resources = ARRAY_SIZE(thermal_resources),
+		.resources = thermal_resources,
+	}, {
+		.name = "chtdc_ti_pwrsrc",
+		.num_resources = ARRAY_SIZE(pwrsrc_resources),
+		.resources = pwrsrc_resources,
+	}, {
+		.name = "chtdc_ti_battery",
+		.num_resources = ARRAY_SIZE(battery_resources),
+		.resources = battery_resources,
+	},
+	{	.name = "chtdc_ti_region", },
+};
+
+static const struct regmap_config chtdc_ti_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 128,
+	.cache_type = REGCACHE_NONE,
+};
+
+static const struct regmap_irq chtdc_ti_irqs[] = {
+	REGMAP_IRQ_REG(CHTDC_TI_PWRBTN, 0, BIT(CHTDC_TI_PWRBTN)),
+	REGMAP_IRQ_REG(CHTDC_TI_DIETMPWARN, 0, BIT(CHTDC_TI_DIETMPWARN)),
+	REGMAP_IRQ_REG(CHTDC_TI_ADCCMPL, 0, BIT(CHTDC_TI_ADCCMPL)),
+	REGMAP_IRQ_REG(CHTDC_TI_VBATLOW, 0, BIT(CHTDC_TI_VBATLOW)),
+	REGMAP_IRQ_REG(CHTDC_TI_VBUSDET, 0, BIT(CHTDC_TI_VBUSDET)),
+	REGMAP_IRQ_REG(CHTDC_TI_CCEOCAL, 0, BIT(CHTDC_TI_CCEOCAL)),
+};
+
+static const struct regmap_irq_chip chtdc_ti_irq_chip = {
+	.name = KBUILD_MODNAME,
+	.irqs = chtdc_ti_irqs,
+	.num_irqs = ARRAY_SIZE(chtdc_ti_irqs),
+	.num_regs = 1,
+	.status_base = CHTDC_TI_IRQLVL1,
+	.mask_base = CHTDC_TI_MASK_IRQLVL1,
+	.ack_base = CHTDC_TI_IRQLVL1,
+};
+
+static int chtdc_ti_probe(struct i2c_client *i2c)
+{
+	struct device *dev = &i2c->dev;
+	struct intel_soc_pmic *pmic;
+	int ret;
+
+	pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
+	if (!pmic)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, pmic);
+
+	pmic->regmap = devm_regmap_init_i2c(i2c, &chtdc_ti_regmap_config);
+	if (IS_ERR(pmic->regmap))
+		return PTR_ERR(pmic->regmap);
+	pmic->irq = i2c->irq;
+
+	ret = devm_regmap_add_irq_chip(dev, pmic->regmap, pmic->irq,
+				       IRQF_ONESHOT, 0,
+				       &chtdc_ti_irq_chip,
+				       &pmic->irq_chip_data);
+	if (ret)
+		return ret;
+
+	return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, chtdc_ti_dev,
+				    ARRAY_SIZE(chtdc_ti_dev), NULL, 0,
+				    regmap_irq_get_domain(pmic->irq_chip_data));
+}
+
+static void chtdc_ti_shutdown(struct i2c_client *i2c)
+{
+	struct intel_soc_pmic *pmic = i2c_get_clientdata(i2c);
+
+	disable_irq(pmic->irq);
+}
+
+static int __maybe_unused chtdc_ti_suspend(struct device *dev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+
+	disable_irq(pmic->irq);
+
+	return 0;
+}
+
+static int __maybe_unused chtdc_ti_resume(struct device *dev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+
+	enable_irq(pmic->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(chtdc_ti_pm_ops, chtdc_ti_suspend, chtdc_ti_resume);
+
+static const struct acpi_device_id chtdc_ti_acpi_ids[] = {
+	{ "INT33F5" },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, chtdc_ti_acpi_ids);
+
+static struct i2c_driver chtdc_ti_i2c_driver = {
+	.driver = {
+		.name = "intel_soc_pmic_chtdc_ti",
+		.pm = &chtdc_ti_pm_ops,
+		.acpi_match_table = chtdc_ti_acpi_ids,
+	},
+	.probe_new = chtdc_ti_probe,
+	.shutdown = chtdc_ti_shutdown,
+};
+module_i2c_driver(chtdc_ti_i2c_driver);
+
+MODULE_DESCRIPTION("I2C driver for Intel SoC Dollar Cove TI PMIC");
+MODULE_LICENSE("GPL v2");

drivers/mfd/lpc_ich.c

@@ -522,6 +522,7 @@ static struct lpc_ich_info lpc_chipset_info[] = {
 		.name = "Avoton SoC",
 		.iTCO_version = 3,
 		.gpio_version = AVOTON_GPIO,
+		.spi_type = INTEL_SPI_BYT,
 	},
 	[LPC_BAYTRAIL] = {
 		.name = "Bay Trail SoC",

drivers/mfd/max77693.c

@@ -48,7 +48,10 @@ static const struct mfd_cell max77693_devs[] = {
 		.name = "max77693-charger",
 		.of_compatible = "maxim,max77693-charger",
 	},
-	{ .name = "max77693-muic", },
+	{
+		.name = "max77693-muic",
+		.of_compatible = "maxim,max77693-muic",
+	},
 	{
 		.name = "max77693-haptic",
 		.of_compatible = "maxim,max77693-haptic",

drivers/mfd/mxs-lradc.c

@@ -196,8 +196,10 @@ static int mxs_lradc_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, lradc);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
+	if (!res) {
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto err_clk;
+	}
 
 	switch (lradc->soc) {
 	case IMX23_LRADC:

drivers/mfd/rts5249.c

@@ -103,8 +103,64 @@ static void rtsx_base_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
 	rtsx_pci_write_register(pcr, FPDCTL, 0x03, 0x03);
 }
 
+static void rts5249_init_from_cfg(struct rtsx_pcr *pcr)
+{
+	struct rtsx_cr_option *option = &(pcr->option);
+	u32 lval;
+
+	if (CHK_PCI_PID(pcr, PID_524A))
+		rtsx_pci_read_config_dword(pcr,
+			PCR_ASPM_SETTING_REG1, &lval);
+	else
+		rtsx_pci_read_config_dword(pcr,
+			PCR_ASPM_SETTING_REG2, &lval);
+
+	if (lval & ASPM_L1_1_EN_MASK)
+		rtsx_set_dev_flag(pcr, ASPM_L1_1_EN);
+
+	if (lval & ASPM_L1_2_EN_MASK)
+		rtsx_set_dev_flag(pcr, ASPM_L1_2_EN);
+
+	if (lval & PM_L1_1_EN_MASK)
+		rtsx_set_dev_flag(pcr, PM_L1_1_EN);
+
+	if (lval & PM_L1_2_EN_MASK)
+		rtsx_set_dev_flag(pcr, PM_L1_2_EN);
+
+	if (option->ltr_en) {
+		u16 val;
+
+		pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &val);
+		if (val & PCI_EXP_DEVCTL2_LTR_EN) {
+			option->ltr_enabled = true;
+			option->ltr_active = true;
+			rtsx_set_ltr_latency(pcr, option->ltr_active_latency);
+		} else {
+			option->ltr_enabled = false;
+		}
+	}
+}
+
+static int rts5249_init_from_hw(struct rtsx_pcr *pcr)
+{
+	struct rtsx_cr_option *option = &(pcr->option);
+
+	if (rtsx_check_dev_flag(pcr, ASPM_L1_1_EN | ASPM_L1_2_EN
+				| PM_L1_1_EN | PM_L1_2_EN))
+		option->force_clkreq_0 = false;
+	else
+		option->force_clkreq_0 = true;
+
+	return 0;
+}
+
 static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
 {
+	struct rtsx_cr_option *option = &(pcr->option);
+
+	rts5249_init_from_cfg(pcr);
+	rts5249_init_from_hw(pcr);
+
 	rtsx_pci_init_cmd(pcr);
 
 	/* Rest L1SUB Config */
@@ -125,7 +181,18 @@ static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
 	else
 		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB0, 0x80);
 
-	return rtsx_pci_send_cmd(pcr, 100);
+	/*
+	 * If u_force_clkreq_0 is enabled, CLKREQ# PIN will be forced
+	 * to drive low, and we forcibly request clock.
+	 */
+	if (option->force_clkreq_0)
+		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG,
+			FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_LOW);
+	else
+		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG,
+			FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_HIGH);
+
+	return rtsx_pci_send_cmd(pcr, CMD_TIMEOUT_DEF);
 }
 
 static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
@@ -285,6 +352,31 @@ static int rtsx_base_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
 	return rtsx_pci_send_cmd(pcr, 100);
 }
 
+static void rts5249_set_aspm(struct rtsx_pcr *pcr, bool enable)
+{
+	struct rtsx_cr_option *option = &pcr->option;
+	u8 val = 0;
+
+	if (pcr->aspm_enabled == enable)
+		return;
+
+	if (option->dev_aspm_mode == DEV_ASPM_DYNAMIC) {
+		if (enable)
+			val = pcr->aspm_en;
+		rtsx_pci_update_cfg_byte(pcr,
+			pcr->pcie_cap + PCI_EXP_LNKCTL,
+			ASPM_MASK_NEG, val);
+	} else if (option->dev_aspm_mode == DEV_ASPM_BACKDOOR) {
+		u8 mask = FORCE_ASPM_VAL_MASK | FORCE_ASPM_CTL0;
+
+		if (!enable)
+			val = FORCE_ASPM_CTL0;
+		rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, mask, val);
+	}
+
+	pcr->aspm_enabled = enable;
+}
+
 static const struct pcr_ops rts5249_pcr_ops = {
 	.fetch_vendor_settings = rtsx_base_fetch_vendor_settings,
 	.extra_init_hw = rts5249_extra_init_hw,
@@ -297,6 +389,7 @@ static const struct pcr_ops rts5249_pcr_ops = {
 	.card_power_off = rtsx_base_card_power_off,
 	.switch_output_voltage = rtsx_base_switch_output_voltage,
 	.force_power_down = rtsx_base_force_power_down,
+	.set_aspm = rts5249_set_aspm,
 };
 
 /* SD Pull Control Enable:
@@ -353,6 +446,8 @@ static const u32 rts5249_ms_pull_ctl_disable_tbl[] = {
 
 void rts5249_init_params(struct rtsx_pcr *pcr)
 {
+	struct rtsx_cr_option *option = &(pcr->option);
+
 	pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
 	pcr->num_slots = 2;
 	pcr->ops = &rts5249_pcr_ops;
@@ -372,6 +467,20 @@ void rts5249_init_params(struct rtsx_pcr *pcr)
 	pcr->ms_pull_ctl_disable_tbl = rts5249_ms_pull_ctl_disable_tbl;
 
 	pcr->reg_pm_ctrl3 = PM_CTRL3;
+
+	option->dev_flags = (LTR_L1SS_PWR_GATE_CHECK_CARD_EN
+				| LTR_L1SS_PWR_GATE_EN);
+	option->ltr_en = true;
+
+	/* Init latency of active, idle, L1OFF to 60us, 300us, 3ms */
+	option->ltr_active_latency = LTR_ACTIVE_LATENCY_DEF;
+	option->ltr_idle_latency = LTR_IDLE_LATENCY_DEF;
+	option->ltr_l1off_latency = LTR_L1OFF_LATENCY_DEF;
+	option->dev_aspm_mode = DEV_ASPM_DYNAMIC;
+	option->l1_snooze_delay = L1_SNOOZE_DELAY_DEF;
+	option->ltr_l1off_sspwrgate = LTR_L1OFF_SSPWRGATE_5249_DEF;
+	option->ltr_l1off_snooze_sspwrgate =
+		LTR_L1OFF_SNOOZE_SSPWRGATE_5249_DEF;
 }
 
 static int rts524a_write_phy(struct rtsx_pcr *pcr, u8 addr, u16 val)
@@ -459,6 +568,40 @@ static int rts524a_extra_init_hw(struct rtsx_pcr *pcr)
 	return 0;
 }
 
+static void rts5250_set_l1off_cfg_sub_d0(struct rtsx_pcr *pcr, int active)
+{
+	struct rtsx_cr_option *option = &(pcr->option);
+
+	u32 interrupt = rtsx_pci_readl(pcr, RTSX_BIPR);
+	int card_exist = (interrupt & SD_EXIST) | (interrupt & MS_EXIST);
+	int aspm_L1_1, aspm_L1_2;
+	u8 val = 0;
+
+	aspm_L1_1 = rtsx_check_dev_flag(pcr, ASPM_L1_1_EN);
+	aspm_L1_2 = rtsx_check_dev_flag(pcr, ASPM_L1_2_EN);
+
+	if (active) {
+		/* Run, latency: 60us */
+		if (aspm_L1_1)
+			val = option->ltr_l1off_snooze_sspwrgate;
+	} else {
+		/* L1off, latency: 300us */
+		if (aspm_L1_2)
+			val = option->ltr_l1off_sspwrgate;
+	}
+
+	if (aspm_L1_1 || aspm_L1_2) {
+		if (rtsx_check_dev_flag(pcr,
+					LTR_L1SS_PWR_GATE_CHECK_CARD_EN)) {
+			if (card_exist)
+				val &= ~L1OFF_MBIAS2_EN_5250;
+			else
+				val |= L1OFF_MBIAS2_EN_5250;
+		}
+	}
+	rtsx_set_l1off_sub(pcr, val);
+}
+
 static const struct pcr_ops rts524a_pcr_ops = {
 	.write_phy = rts524a_write_phy,
 	.read_phy = rts524a_read_phy,
@@ -473,11 +616,16 @@ static const struct pcr_ops rts524a_pcr_ops = {
 	.card_power_off = rtsx_base_card_power_off,
 	.switch_output_voltage = rtsx_base_switch_output_voltage,
 	.force_power_down = rtsx_base_force_power_down,
+	.set_l1off_cfg_sub_d0 = rts5250_set_l1off_cfg_sub_d0,
+	.set_aspm = rts5249_set_aspm,
 };
 
 void rts524a_init_params(struct rtsx_pcr *pcr)
 {
 	rts5249_init_params(pcr);
+	pcr->option.ltr_l1off_sspwrgate = LTR_L1OFF_SSPWRGATE_5250_DEF;
+	pcr->option.ltr_l1off_snooze_sspwrgate =
+		LTR_L1OFF_SNOOZE_SSPWRGATE_5250_DEF;
 
 	pcr->reg_pm_ctrl3 = RTS524A_PM_CTRL3;
 	pcr->ops = &rts524a_pcr_ops;
@@ -576,11 +724,16 @@ static const struct pcr_ops rts525a_pcr_ops = {
 	.card_power_off = rtsx_base_card_power_off,
 	.switch_output_voltage = rts525a_switch_output_voltage,
 	.force_power_down = rtsx_base_force_power_down,
+	.set_l1off_cfg_sub_d0 = rts5250_set_l1off_cfg_sub_d0,
+	.set_aspm = rts5249_set_aspm,
 };
 
 void rts525a_init_params(struct rtsx_pcr *pcr)
 {
 	rts5249_init_params(pcr);
+	pcr->option.ltr_l1off_sspwrgate = LTR_L1OFF_SSPWRGATE_5250_DEF;
+	pcr->option.ltr_l1off_snooze_sspwrgate =
+		LTR_L1OFF_SNOOZE_SSPWRGATE_5250_DEF;
 
 	pcr->reg_pm_ctrl3 = RTS524A_PM_CTRL3;
 	pcr->ops = &rts525a_pcr_ops;

drivers/mfd/rtsx_pcr.c

@@ -79,6 +79,96 @@ static inline void rtsx_pci_disable_aspm(struct rtsx_pcr *pcr)
 		0xFC, 0);
 }
 
+int rtsx_comm_set_ltr_latency(struct rtsx_pcr *pcr, u32 latency)
+{
+	rtsx_pci_write_register(pcr, MSGTXDATA0,
+				MASK_8_BIT_DEF, (u8) (latency & 0xFF));
+	rtsx_pci_write_register(pcr, MSGTXDATA1,
+				MASK_8_BIT_DEF, (u8)((latency >> 8) & 0xFF));
+	rtsx_pci_write_register(pcr, MSGTXDATA2,
+				MASK_8_BIT_DEF, (u8)((latency >> 16) & 0xFF));
+	rtsx_pci_write_register(pcr, MSGTXDATA3,
+				MASK_8_BIT_DEF, (u8)((latency >> 24) & 0xFF));
+	rtsx_pci_write_register(pcr, LTR_CTL, LTR_TX_EN_MASK |
+		LTR_LATENCY_MODE_MASK, LTR_TX_EN_1 | LTR_LATENCY_MODE_SW);
+
+	return 0;
+}
+
+int rtsx_set_ltr_latency(struct rtsx_pcr *pcr, u32 latency)
+{
+	if (pcr->ops->set_ltr_latency)
+		return pcr->ops->set_ltr_latency(pcr, latency);
+	else
+		return rtsx_comm_set_ltr_latency(pcr, latency);
+}
+
+static void rtsx_comm_set_aspm(struct rtsx_pcr *pcr, bool enable)
+{
+	struct rtsx_cr_option *option = &pcr->option;
+
+	if (pcr->aspm_enabled == enable)
+		return;
+
+	if (option->dev_aspm_mode == DEV_ASPM_DYNAMIC) {
+		if (enable)
+			rtsx_pci_enable_aspm(pcr);
+		else
+			rtsx_pci_disable_aspm(pcr);
+	} else if (option->dev_aspm_mode == DEV_ASPM_BACKDOOR) {
+		u8 mask = FORCE_ASPM_VAL_MASK;
+		u8 val = 0;
+
+		if (enable)
+			val = pcr->aspm_en;
+		rtsx_pci_write_register(pcr, ASPM_FORCE_CTL,  mask, val);
+	}
+
+	pcr->aspm_enabled = enable;
+}
+
+static void rtsx_disable_aspm(struct rtsx_pcr *pcr)
+{
+	if (pcr->ops->set_aspm)
+		pcr->ops->set_aspm(pcr, false);
+	else
+		rtsx_comm_set_aspm(pcr, false);
+}
+
+int rtsx_set_l1off_sub(struct rtsx_pcr *pcr, u8 val)
+{
+	rtsx_pci_write_register(pcr, L1SUB_CONFIG3, 0xFF, val);
+
+	return 0;
+}
+
+void rtsx_set_l1off_sub_cfg_d0(struct rtsx_pcr *pcr, int active)
+{
+	if (pcr->ops->set_l1off_cfg_sub_d0)
+		pcr->ops->set_l1off_cfg_sub_d0(pcr, active);
+}
+
+static void rtsx_comm_pm_full_on(struct rtsx_pcr *pcr)
+{
+	struct rtsx_cr_option *option = &pcr->option;
+
+	rtsx_disable_aspm(pcr);
+
+	if (option->ltr_enabled)
+		rtsx_set_ltr_latency(pcr, option->ltr_active_latency);
+
+	if (rtsx_check_dev_flag(pcr, LTR_L1SS_PWR_GATE_EN))
+		rtsx_set_l1off_sub_cfg_d0(pcr, 1);
+}
+
+void rtsx_pm_full_on(struct rtsx_pcr *pcr)
+{
+	if (pcr->ops->full_on)
+		pcr->ops->full_on(pcr);
+	else
+		rtsx_comm_pm_full_on(pcr);
+}
+
 void rtsx_pci_start_run(struct rtsx_pcr *pcr)
 {
 	/* If pci device removed, don't queue idle work any more */
@@ -89,9 +179,7 @@ void rtsx_pci_start_run(struct rtsx_pcr *pcr)
 		pcr->state = PDEV_STAT_RUN;
 		if (pcr->ops->enable_auto_blink)
 			pcr->ops->enable_auto_blink(pcr);
-
+		rtsx_pm_full_on(pcr);
-		if (pcr->aspm_en)
-			rtsx_pci_disable_aspm(pcr);
 	}
 
 	mod_delayed_work(system_wq, &pcr->idle_work, msecs_to_jiffies(200));
@@ -958,6 +1046,41 @@ static int rtsx_pci_acquire_irq(struct rtsx_pcr *pcr)
 	return 0;
 }
 
+static void rtsx_enable_aspm(struct rtsx_pcr *pcr)
+{
+	if (pcr->ops->set_aspm)
+		pcr->ops->set_aspm(pcr, true);
+	else
+		rtsx_comm_set_aspm(pcr, true);
+}
+
+static void rtsx_comm_pm_power_saving(struct rtsx_pcr *pcr)
+{
+	struct rtsx_cr_option *option = &pcr->option;
+
+	if (option->ltr_enabled) {
+		u32 latency = option->ltr_l1off_latency;
+
+		if (rtsx_check_dev_flag(pcr, L1_SNOOZE_TEST_EN))
+			mdelay(option->l1_snooze_delay);
+
+		rtsx_set_ltr_latency(pcr, latency);
+	}
+
+	if (rtsx_check_dev_flag(pcr, LTR_L1SS_PWR_GATE_EN))
+		rtsx_set_l1off_sub_cfg_d0(pcr, 0);
+
+	rtsx_enable_aspm(pcr);
+}
+
+void rtsx_pm_power_saving(struct rtsx_pcr *pcr)
+{
+	if (pcr->ops->power_saving)
+		pcr->ops->power_saving(pcr);
+	else
+		rtsx_comm_pm_power_saving(pcr);
+}
+
 static void rtsx_pci_idle_work(struct work_struct *work)
 {
 	struct delayed_work *dwork = to_delayed_work(work);
@@ -974,8 +1097,7 @@ static void rtsx_pci_idle_work(struct work_struct *work)
 	if (pcr->ops->turn_off_led)
 		pcr->ops->turn_off_led(pcr);
 
-	if (pcr->aspm_en)
+	rtsx_pm_power_saving(pcr);
-		rtsx_pci_enable_aspm(pcr);
 
 	mutex_unlock(&pcr->pcr_mutex);
 }
@@ -1063,6 +1185,16 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
 	if (err < 0)
 		return err;
 
+	switch (PCI_PID(pcr)) {
+	case PID_5250:
+	case PID_524A:
+	case PID_525A:
+		rtsx_pci_write_register(pcr, PM_CLK_FORCE_CTL, 1, 1);
+		break;
+	default:
+		break;
+	}
+
 	/* Enable clk_request_n to enable clock power management */
 	rtsx_pci_write_config_byte(pcr, pcr->pcie_cap + PCI_EXP_LNKCTL + 1, 1);
 	/* Enter L1 when host tx idle */

drivers/mfd/rtsx_pcr.h

@@ -32,6 +32,18 @@
 #define RTS524A_PME_FORCE_CTL		0xFF78
 #define RTS524A_PM_CTRL3		0xFF7E
 
+#define LTR_ACTIVE_LATENCY_DEF		0x883C
+#define LTR_IDLE_LATENCY_DEF		0x892C
+#define LTR_L1OFF_LATENCY_DEF		0x9003
+#define L1_SNOOZE_DELAY_DEF		1
+#define LTR_L1OFF_SSPWRGATE_5249_DEF		0xAF
+#define LTR_L1OFF_SSPWRGATE_5250_DEF		0xFF
+#define LTR_L1OFF_SNOOZE_SSPWRGATE_5249_DEF	0xAC
+#define LTR_L1OFF_SNOOZE_SSPWRGATE_5250_DEF	0xF8
+#define CMD_TIMEOUT_DEF		100
+#define ASPM_MASK_NEG		0xFC
+#define MASK_8_BIT_DEF		0xFF
+
 int __rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val);
 int __rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val);
 
@@ -85,5 +97,7 @@ do {									\
 
 /* generic operations */
 int rtsx_gops_pm_reset(struct rtsx_pcr *pcr);
+int rtsx_set_ltr_latency(struct rtsx_pcr *pcr, u32 latency);
+int rtsx_set_l1off_sub(struct rtsx_pcr *pcr, u8 val);
 
 #endif

drivers/mfd/sprd-sc27xx-spi.c

@@ -0,0 +1,259 @@
+/*
+ * Copyright (C) 2017 Spreadtrum Communications Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#define SPRD_PMIC_INT_MASK_STATUS	0x0
+#define SPRD_PMIC_INT_RAW_STATUS	0x4
+#define SPRD_PMIC_INT_EN		0x8
+
+#define SPRD_SC2731_IRQ_BASE		0x140
+#define SPRD_SC2731_IRQ_NUMS		16
+
+struct sprd_pmic {
+	struct regmap *regmap;
+	struct device *dev;
+	struct regmap_irq *irqs;
+	struct regmap_irq_chip irq_chip;
+	struct regmap_irq_chip_data *irq_data;
+	int irq;
+};
+
+struct sprd_pmic_data {
+	u32 irq_base;
+	u32 num_irqs;
+};
+
+/*
+ * Since different PMICs of SC27xx series can have different interrupt
+ * base address and irq number, we should save irq number and irq base
+ * in the device data structure.
+ */
+static const struct sprd_pmic_data sc2731_data = {
+	.irq_base = SPRD_SC2731_IRQ_BASE,
+	.num_irqs = SPRD_SC2731_IRQ_NUMS,
+};
+
+static const struct mfd_cell sprd_pmic_devs[] = {
+	{
+		.name = "sc27xx-wdt",
+		.of_compatible = "sprd,sc27xx-wdt",
+	}, {
+		.name = "sc27xx-rtc",
+		.of_compatible = "sprd,sc27xx-rtc",
+	}, {
+		.name = "sc27xx-charger",
+		.of_compatible = "sprd,sc27xx-charger",
+	}, {
+		.name = "sc27xx-chg-timer",
+		.of_compatible = "sprd,sc27xx-chg-timer",
+	}, {
+		.name = "sc27xx-fast-chg",
+		.of_compatible = "sprd,sc27xx-fast-chg",
+	}, {
+		.name = "sc27xx-chg-wdt",
+		.of_compatible = "sprd,sc27xx-chg-wdt",
+	}, {
+		.name = "sc27xx-typec",
+		.of_compatible = "sprd,sc27xx-typec",
+	}, {
+		.name = "sc27xx-flash",
+		.of_compatible = "sprd,sc27xx-flash",
+	}, {
+		.name = "sc27xx-eic",
+		.of_compatible = "sprd,sc27xx-eic",
+	}, {
+		.name = "sc27xx-efuse",
+		.of_compatible = "sprd,sc27xx-efuse",
+	}, {
+		.name = "sc27xx-thermal",
+		.of_compatible = "sprd,sc27xx-thermal",
+	}, {
+		.name = "sc27xx-adc",
+		.of_compatible = "sprd,sc27xx-adc",
+	}, {
+		.name = "sc27xx-audio-codec",
+		.of_compatible = "sprd,sc27xx-audio-codec",
+	}, {
+		.name = "sc27xx-regulator",
+		.of_compatible = "sprd,sc27xx-regulator",
+	}, {
+		.name = "sc27xx-vibrator",
+		.of_compatible = "sprd,sc27xx-vibrator",
+	}, {
+		.name = "sc27xx-keypad-led",
+		.of_compatible = "sprd,sc27xx-keypad-led",
+	}, {
+		.name = "sc27xx-bltc",
+		.of_compatible = "sprd,sc27xx-bltc",
+	}, {
+		.name = "sc27xx-fgu",
+		.of_compatible = "sprd,sc27xx-fgu",
+	}, {
+		.name = "sc27xx-7sreset",
+		.of_compatible = "sprd,sc27xx-7sreset",
+	}, {
+		.name = "sc27xx-poweroff",
+		.of_compatible = "sprd,sc27xx-poweroff",
+	},
+};
+
+static int sprd_pmic_spi_write(void *context, const void *data, size_t count)
+{
+	struct device *dev = context;
+	struct spi_device *spi = to_spi_device(dev);
+
+	return spi_write(spi, data, count);
+}
+
+static int sprd_pmic_spi_read(void *context,
+			      const void *reg, size_t reg_size,
+			      void *val, size_t val_size)
+{
+	struct device *dev = context;
+	struct spi_device *spi = to_spi_device(dev);
+	u32 rx_buf[2] = { 0 };
+	int ret;
+
+	/* Now we only support one PMIC register to read every time. */
+	if (reg_size != sizeof(u32) || val_size != sizeof(u32))
+		return -EINVAL;
+
+	/* Copy address to read from into first element of SPI buffer. */
+	memcpy(rx_buf, reg, sizeof(u32));
+	ret = spi_read(spi, rx_buf, 1);
+	if (ret < 0)
+		return ret;
+
+	memcpy(val, rx_buf, val_size);
+	return 0;
+}
+
+static struct regmap_bus sprd_pmic_regmap = {
+	.write = sprd_pmic_spi_write,
+	.read = sprd_pmic_spi_read,
+	.reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+	.val_format_endian_default = REGMAP_ENDIAN_NATIVE,
+};
+
+static const struct regmap_config sprd_pmic_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 0xffff,
+};
+
+static int sprd_pmic_probe(struct spi_device *spi)
+{
+	struct sprd_pmic *ddata;
+	const struct sprd_pmic_data *pdata;
+	int ret, i;
+
+	pdata = of_device_get_match_data(&spi->dev);
+	if (!pdata) {
+		dev_err(&spi->dev, "No matching driver data found\n");
+		return -EINVAL;
+	}
+
+	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	ddata->regmap = devm_regmap_init(&spi->dev, &sprd_pmic_regmap,
+					 &spi->dev, &sprd_pmic_config);
+	if (IS_ERR(ddata->regmap)) {
+		ret = PTR_ERR(ddata->regmap);
+		dev_err(&spi->dev, "Failed to allocate register map %d\n", ret);
+		return ret;
+	}
+
+	spi_set_drvdata(spi, ddata);
+	ddata->dev = &spi->dev;
+	ddata->irq = spi->irq;
+
+	ddata->irq_chip.name = dev_name(&spi->dev);
+	ddata->irq_chip.status_base =
+		pdata->irq_base + SPRD_PMIC_INT_MASK_STATUS;
+	ddata->irq_chip.mask_base = pdata->irq_base + SPRD_PMIC_INT_EN;
+	ddata->irq_chip.ack_base = 0;
+	ddata->irq_chip.num_regs = 1;
+	ddata->irq_chip.num_irqs = pdata->num_irqs;
+	ddata->irq_chip.mask_invert = true;
+
+	ddata->irqs = devm_kzalloc(&spi->dev, sizeof(struct regmap_irq) *
+				   pdata->num_irqs, GFP_KERNEL);
+	if (!ddata->irqs)
+		return -ENOMEM;
+
+	ddata->irq_chip.irqs = ddata->irqs;
+	for (i = 0; i < pdata->num_irqs; i++) {
+		ddata->irqs[i].reg_offset = i / pdata->num_irqs;
+		ddata->irqs[i].mask = BIT(i % pdata->num_irqs);
+	}
+
+	ret = devm_regmap_add_irq_chip(&spi->dev, ddata->regmap, ddata->irq,
+				       IRQF_ONESHOT | IRQF_NO_SUSPEND, 0,
+				       &ddata->irq_chip, &ddata->irq_data);
+	if (ret) {
+		dev_err(&spi->dev, "Failed to add PMIC irq chip %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_mfd_add_devices(&spi->dev, PLATFORM_DEVID_AUTO,
+				   sprd_pmic_devs, ARRAY_SIZE(sprd_pmic_devs),
+				   NULL, 0,
+				   regmap_irq_get_domain(ddata->irq_data));
+	if (ret) {
+		dev_err(&spi->dev, "Failed to register device %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id sprd_pmic_match[] = {
+	{ .compatible = "sprd,sc2731", .data = &sc2731_data },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sprd_pmic_match);
+
+static struct spi_driver sprd_pmic_driver = {
+	.driver = {
+		.name = "sc27xx-pmic",
+		.bus = &spi_bus_type,
+		.of_match_table = sprd_pmic_match,
+	},
+	.probe = sprd_pmic_probe,
+};
+
+static int __init sprd_pmic_init(void)
+{
+	return spi_register_driver(&sprd_pmic_driver);
+}
+subsys_initcall(sprd_pmic_init);
+
+static void __exit sprd_pmic_exit(void)
+{
+	spi_unregister_driver(&sprd_pmic_driver);
+}
+module_exit(sprd_pmic_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Spreadtrum SC27xx PMICs driver");
+MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>");

drivers/mfd/ssbi.c

@@ -314,7 +314,7 @@ static int ssbi_probe(struct platform_device *pdev)
 
 	spin_lock_init(&ssbi->lock);
 
-	return of_platform_populate(np, NULL, NULL, &pdev->dev);
+	return devm_of_platform_populate(&pdev->dev);
 }
 
 static const struct of_device_id ssbi_match_table[] = {

drivers/mfd/stw481x.c

@@ -72,10 +72,12 @@ static int stw481x_get_pctl_reg(struct stw481x *stw481x, u8 reg)
 static int stw481x_startup(struct stw481x *stw481x)
 {
 	/* Voltages multiplied by 100 */
-	u8 vcore_val[] = { 100, 105, 110, 115, 120, 122, 124, 126, 128,
+	static const u8 vcore_val[] = {
-			   130, 132, 134, 136, 138, 140, 145 };
+		100, 105, 110, 115, 120, 122, 124, 126, 128,
-	u8 vpll_val[] = { 105, 120, 130, 180 };
+		130, 132, 134, 136, 138, 140, 145
-	u8 vaux_val[] = { 15, 18, 25, 28 };
+	};
+	static const u8 vpll_val[] = { 105, 120, 130, 180 };
+	static const u8 vaux_val[] = { 15, 18, 25, 28 };
 	u8 vcore;
 	u8 vcore_slp;
 	u8 vpll;

drivers/mfd/tps65217.c

@@ -311,37 +311,20 @@ static const struct regmap_config tps65217_regmap_config = {
 };
 
 static const struct of_device_id tps65217_of_match[] = {
-	{ .compatible = "ti,tps65217", .data = (void *)TPS65217 },
+	{ .compatible = "ti,tps65217"},
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, tps65217_of_match);
 
-static int tps65217_probe(struct i2c_client *client,
+static int tps65217_probe(struct i2c_client *client)
-				const struct i2c_device_id *ids)
 {
 	struct tps65217 *tps;
 	unsigned int version;
-	unsigned long chip_id = ids->driver_data;
-	const struct of_device_id *match;
 	bool status_off = false;
 	int ret;
 
-	if (client->dev.of_node) {
-		match = of_match_device(tps65217_of_match, &client->dev);
-		if (!match) {
-			dev_err(&client->dev,
-				"Failed to find matching dt id\n");
-			return -EINVAL;
-		}
-		chip_id = (unsigned long)match->data;
 	status_off = of_property_read_bool(client->dev.of_node,
 					   "ti,pmic-shutdown-controller");
-	}
-
-	if (!chip_id) {
-		dev_err(&client->dev, "id is null.\n");
-		return -ENODEV;
-	}
 
 	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
 	if (!tps)
@@ -349,7 +332,6 @@ static int tps65217_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, tps);
 	tps->dev = &client->dev;
-	tps->id = chip_id;
 
 	tps->regmap = devm_regmap_init_i2c(client, &tps65217_regmap_config);
 	if (IS_ERR(tps->regmap)) {
@@ -430,7 +412,7 @@ static struct i2c_driver tps65217_driver = {
 		.of_match_table = tps65217_of_match,
 	},
 	.id_table	= tps65217_id_table,
-	.probe		= tps65217_probe,
+	.probe_new	= tps65217_probe,
 	.remove		= tps65217_remove,
 };
 

drivers/mfd/tps65218.c

@@ -215,17 +215,9 @@ static int tps65218_probe(struct i2c_client *client,
 				const struct i2c_device_id *ids)
 {
 	struct tps65218 *tps;
-	const struct of_device_id *match;
 	int ret;
 	unsigned int chipid;
 
-	match = of_match_device(of_tps65218_match_table, &client->dev);
-	if (!match) {
-		dev_err(&client->dev,
-			"Failed to find matching dt id\n");
-		return -EINVAL;
-	}
-
 	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
 	if (!tps)
 		return -ENOMEM;

drivers/regulator/tps65217-regulator.c

@@ -228,11 +228,6 @@ static int tps65217_regulator_probe(struct platform_device *pdev)
 	int i, ret;
 	unsigned int val;
 
-	if (tps65217_chip_id(tps) != TPS65217) {
-		dev_err(&pdev->dev, "Invalid tps chip version\n");
-		return -ENODEV;
-	}
-
 	/* Allocate memory for strobes */
 	tps->strobes = devm_kzalloc(&pdev->dev, sizeof(u8) *
 				    TPS65217_NUM_REGULATOR, GFP_KERNEL);

drivers/video/backlight/tps65217_bl.c

@@ -275,17 +275,9 @@ static int tps65217_bl_probe(struct platform_device *pdev)
 	struct tps65217_bl_pdata *pdata;
 	struct backlight_properties bl_props;
 
-	if (tps->dev->of_node) {
 	pdata = tps65217_bl_parse_dt(pdev);
 	if (IS_ERR(pdata))
 		return PTR_ERR(pdata);
-	} else {
-		pdata = dev_get_platdata(&pdev->dev);
-		if (!pdata) {
-			dev_err(&pdev->dev, "no platform data provided\n");
-			return -EINVAL;
-		}
-	}
 
 	tps65217_bl = devm_kzalloc(&pdev->dev, sizeof(*tps65217_bl),
 				GFP_KERNEL);

include/linux/mfd/rtsx_pci.h

@@ -574,6 +574,12 @@
 #define MSGTXDATA3			0xFE47
 #define MSGTXCTL			0xFE48
 #define LTR_CTL				0xFE4A
+#define LTR_TX_EN_MASK		BIT(7)
+#define LTR_TX_EN_1			BIT(7)
+#define LTR_TX_EN_0			0
+#define LTR_LATENCY_MODE_MASK		BIT(6)
+#define LTR_LATENCY_MODE_HW		0
+#define LTR_LATENCY_MODE_SW		BIT(6)
 #define OBFF_CFG			0xFE4C
 
 #define CDRESUMECTL			0xFE52
@@ -617,11 +623,15 @@
 #define L1SUB_CONFIG2			0xFE8E
 #define   L1SUB_AUTO_CFG		0x02
 #define L1SUB_CONFIG3			0xFE8F
+#define   L1OFF_MBIAS2_EN_5250		BIT(7)
 
 #define DUMMY_REG_RESET_0		0xFE90
 
 #define AUTOLOAD_CFG_BASE		0xFF00
 #define PETXCFG				0xFF03
+#define FORCE_CLKREQ_DELINK_MASK	BIT(7)
+#define FORCE_CLKREQ_LOW	0x80
+#define FORCE_CLKREQ_HIGH	0x00
 
 #define PM_CTRL1			0xFF44
 #define   CD_RESUME_EN_MASK		0xF0
@@ -845,6 +855,9 @@
 #define   PHY_DIG1E_RX_EN_KEEP		0x0001
 #define PHY_DUM_REG			0x1F
 
+#define PCR_ASPM_SETTING_REG1		0x160
+#define PCR_ASPM_SETTING_REG2		0x168
+
 #define PCR_SETTING_REG1		0x724
 #define PCR_SETTING_REG2		0x814
 #define PCR_SETTING_REG3		0x747
@@ -877,14 +890,79 @@ struct pcr_ops {
 	int		(*conv_clk_and_div_n)(int clk, int dir);
 	void		(*fetch_vendor_settings)(struct rtsx_pcr *pcr);
 	void		(*force_power_down)(struct rtsx_pcr *pcr, u8 pm_state);
+
+	void (*set_aspm)(struct rtsx_pcr *pcr, bool enable);
+	int (*set_ltr_latency)(struct rtsx_pcr *pcr, u32 latency);
+	int (*set_l1off_sub)(struct rtsx_pcr *pcr, u8 val);
+	void (*set_l1off_cfg_sub_d0)(struct rtsx_pcr *pcr, int active);
+	void (*full_on)(struct rtsx_pcr *pcr);
+	void (*power_saving)(struct rtsx_pcr *pcr);
 };
 
 enum PDEV_STAT  {PDEV_STAT_IDLE, PDEV_STAT_RUN};
 
+#define ASPM_L1_1_EN_MASK		BIT(3)
+#define ASPM_L1_2_EN_MASK		BIT(2)
+#define PM_L1_1_EN_MASK		BIT(1)
+#define PM_L1_2_EN_MASK		BIT(0)
+
+#define ASPM_L1_1_EN			BIT(0)
+#define ASPM_L1_2_EN			BIT(1)
+#define PM_L1_1_EN				BIT(2)
+#define PM_L1_2_EN				BIT(3)
+#define LTR_L1SS_PWR_GATE_EN	BIT(4)
+#define L1_SNOOZE_TEST_EN		BIT(5)
+#define LTR_L1SS_PWR_GATE_CHECK_CARD_EN	BIT(6)
+
+enum dev_aspm_mode {
+	DEV_ASPM_DISABLE = 0,
+	DEV_ASPM_DYNAMIC,
+	DEV_ASPM_BACKDOOR,
+	DEV_ASPM_STATIC,
+};
+
+/*
+ * struct rtsx_cr_option  - card reader option
+ * @dev_flags: device flags
+ * @force_clkreq_0: force clock request
+ * @ltr_en: enable ltr mode flag
+ * @ltr_enabled: ltr mode in configure space flag
+ * @ltr_active: ltr mode status
+ * @ltr_active_latency: ltr mode active latency
+ * @ltr_idle_latency: ltr mode idle latency
+ * @ltr_l1off_latency: ltr mode l1off latency
+ * @dev_aspm_mode: device aspm mode
+ * @l1_snooze_delay: l1 snooze delay
+ * @ltr_l1off_sspwrgate: ltr l1off sspwrgate
+ * @ltr_l1off_snooze_sspwrgate: ltr l1off snooze sspwrgate
+ */
+struct rtsx_cr_option {
+	u32 dev_flags;
+	bool force_clkreq_0;
+	bool ltr_en;
+	bool ltr_enabled;
+	bool ltr_active;
+	u32 ltr_active_latency;
+	u32 ltr_idle_latency;
+	u32 ltr_l1off_latency;
+	enum dev_aspm_mode dev_aspm_mode;
+	u32 l1_snooze_delay;
+	u8 ltr_l1off_sspwrgate;
+	u8 ltr_l1off_snooze_sspwrgate;
+};
+
+#define rtsx_set_dev_flag(cr, flag) \
+	((cr)->option.dev_flags |= (flag))
+#define rtsx_clear_dev_flag(cr, flag) \
+	((cr)->option.dev_flags &= ~(flag))
+#define rtsx_check_dev_flag(cr, flag) \
+	((cr)->option.dev_flags & (flag))
+
 struct rtsx_pcr {
 	struct pci_dev			*pci;
 	unsigned int			id;
 	int				pcie_cap;
+	struct rtsx_cr_option	option;
 
 	/* pci resources */
 	unsigned long			addr;
@@ -941,6 +1019,7 @@ struct rtsx_pcr {
 	u8				card_drive_sel;
 #define ASPM_L1_EN			0x02
 	u8				aspm_en;
+	bool				aspm_enabled;
 
 #define PCR_MS_PMOS			(1 << 0)
 #define PCR_REVERSE_SOCKET		(1 << 1)
@@ -965,6 +1044,11 @@ struct rtsx_pcr {
 	u8				dma_error_count;
 };
 
+#define PID_524A	0x524A
+#define PID_5249		0x5249
+#define PID_5250		0x5250
+#define PID_525A	0x525A
+
 #define CHK_PCI_PID(pcr, pid)		((pcr)->pci->device == (pid))
 #define PCI_VID(pcr)			((pcr)->pci->vendor)
 #define PCI_PID(pcr)			((pcr)->pci->device)

include/linux/mfd/tps65217.h

@@ -263,7 +263,6 @@ struct tps65217_board {
 struct tps65217 {
 	struct device *dev;
 	struct tps65217_board *pdata;
-	unsigned long id;
 	struct regulator_desc desc[TPS65217_NUM_REGULATOR];
 	struct regmap *regmap;
 	u8 *strobes;
@@ -278,11 +277,6 @@ static inline struct tps65217 *dev_to_tps65217(struct device *dev)
 	return dev_get_drvdata(dev);
 }
 
-static inline unsigned long tps65217_chip_id(struct tps65217 *tps65217)
-{
-	return tps65217->id;
-}
-
 int tps65217_reg_read(struct tps65217 *tps, unsigned int reg,
 					unsigned int *val);
 int tps65217_reg_write(struct tps65217 *tps, unsigned int reg,