drm/msm/dsi: Calculate link clock rates with updated dsi->lanes

After the commit mentioned below, we start computing the byte and pixel
clocks (dsi_calc_clk_rate) in the DSI bridge's mode_set() op. The
calculation involves the number of DSI lanes being used by the
downstream bridge/panel.

If the downstream bridge/panel tries to change the number of DSI lanes
(as done in the ADV7533 driver) in its mode_set() op, then our DSI
host driver will not have the correct number of lanes when computing
byte/pixel clocks.

Fix this by delaying the clock rate calculation in the DSI bridge
enable path. In particular, compute the clock rates in
msm_dsi_host_get_phy_clk_req().

This fixes the DSI host error interrupts seen when we try to switch
between modes that require different number of lanes (4 to 3 lanes, or
vice versa) on db410c. The error interrupts occur since the byte/pixel
clock rates aren't according to what the DSI video mode timing engine
expects.

Fixes: b62aa70a98 ("drm/msm/dsi: Move PHY operations out of host")
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This commit is contained in:
Archit Taneja 2017-07-12 15:09:55 +05:30 committed by Rob Clark
parent af1f5f12c2
commit d4cea38ebb
1 changed files with 7 additions and 7 deletions

View File

@ -2137,6 +2137,13 @@ void msm_dsi_host_get_phy_clk_req(struct mipi_dsi_host *host,
struct msm_dsi_phy_clk_request *clk_req)
{
struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
int ret;
ret = dsi_calc_clk_rate(msm_host);
if (ret) {
pr_err("%s: unable to calc clk rate, %d\n", __func__, ret);
return;
}
clk_req->bitclk_rate = msm_host->byte_clk_rate * 8;
clk_req->escclk_rate = msm_host->esc_clk_rate;
@ -2280,7 +2287,6 @@ int msm_dsi_host_set_display_mode(struct mipi_dsi_host *host,
struct drm_display_mode *mode)
{
struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
int ret;
if (msm_host->mode) {
drm_mode_destroy(msm_host->dev, msm_host->mode);
@ -2293,12 +2299,6 @@ int msm_dsi_host_set_display_mode(struct mipi_dsi_host *host,
return -ENOMEM;
}
ret = dsi_calc_clk_rate(msm_host);
if (ret) {
pr_err("%s: unable to calc clk rate, %d\n", __func__, ret);
return ret;
}
return 0;
}