mirror of https://gitee.com/openkylin/linux.git
ARM: dts: Add devicetree for Integrator/AP with IM-PD1
This adds a device tree for the Integrator/AP with the IM-PD1 logic module mounted, using the new logic module bindings. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Linus Walleij
parent
8f3d9f3542
commit
d67ef24adf
|
|
@ -237,6 +237,7 @@ dtb-$(CONFIG_ARCH_HIX5HD2) += \
|
|||
hisi-x5hd2-dkb.dtb
|
||||
dtb-$(CONFIG_ARCH_INTEGRATOR) += \
|
||||
integratorap.dtb \
|
||||
integratorap-im-pd1.dtb \
|
||||
integratorcp.dtb
|
||||
dtb-$(CONFIG_ARCH_IXP4XX) += \
|
||||
intel-ixp42x-linksys-nslu2.dtb \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,270 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree for the ARM Integrator/AP platform
|
||||
* with the IM-PD1 example logical module mounted.
|
||||
*/
|
||||
|
||||
#include "integratorap.dts"
|
||||
|
||||
/ {
|
||||
model = "ARM Integrator/AP with IM-PD1";
|
||||
compatible = "arm,integrator-ap";
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
impd1_ram: vram@c2000000 {
|
||||
/* 1 MB of designated video RAM on the IM-PD1 */
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0xc2000000 0x00100000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&lm0 {
|
||||
syscon@0 {
|
||||
compatible = "arm,im-pd1-syscon", "syscon";
|
||||
reg = <0x00000000 0x1000>;
|
||||
|
||||
vco1: clock@00 {
|
||||
compatible = "arm,impd1-vco1";
|
||||
#clock-cells = <0>;
|
||||
lock-offset = <0x08>;
|
||||
vco-offset = <0x00>;
|
||||
clocks = <&sysclk>;
|
||||
clock-output-names = "IM-PD1-VCO1";
|
||||
};
|
||||
|
||||
vco2: clock@04 {
|
||||
compatible = "arm,impd1-vco2";
|
||||
#clock-cells = <0>;
|
||||
lock-offset = <0x08>;
|
||||
vco-offset = <0x04>;
|
||||
clocks = <&sysclk>;
|
||||
clock-output-names = "IM-PD1-VCO2";
|
||||
};
|
||||
};
|
||||
|
||||
/* Also used for the Smart Card Interface SCI */
|
||||
impd1_uartclk: clock@1_4 {
|
||||
compatible = "fixed-factor-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-div = <4>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&vco2>;
|
||||
clock-output-names = "VCO2_DIV4";
|
||||
};
|
||||
|
||||
/* For the SSP the clock is divided by 64 */
|
||||
impd1_sspclk: clock@1_64 {
|
||||
compatible = "fixed-factor-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-div = <64>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&vco2>;
|
||||
clock-output-names = "VCO2_DIV64";
|
||||
};
|
||||
|
||||
/* Fixed regulator for the MMC */
|
||||
impd1_3v3: regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* Push buttons on the IM-PD1 */
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
button@0 {
|
||||
debounce-interval = <50>;
|
||||
linux,code = <KEY_UP>;
|
||||
label = "UP";
|
||||
gpios = <&impd1_gpio1 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
button@1 {
|
||||
debounce-interval = <50>;
|
||||
linux,code = <KEY_DOWN>;
|
||||
label = "DOWN";
|
||||
gpios = <&impd1_gpio1 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
button@2 {
|
||||
debounce-interval = <50>;
|
||||
linux,code = <KEY_LEFT>;
|
||||
label = "LEFT";
|
||||
gpios = <&impd1_gpio1 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
button@3 {
|
||||
debounce-interval = <50>;
|
||||
linux,code = <KEY_RIGHT>;
|
||||
label = "UP";
|
||||
gpios = <&impd1_gpio1 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
button@4 {
|
||||
debounce-interval = <50>;
|
||||
linux,code = <KEY_ESC>;
|
||||
label = "ESC";
|
||||
gpios = <&impd1_gpio1 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
button@5 {
|
||||
debounce-interval = <50>;
|
||||
linux,code = <KEY_ENTER>;
|
||||
label = "ENTER";
|
||||
gpios = <&impd1_gpio1 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
bridge {
|
||||
compatible = "ti,ths8134b", "ti,ths8134";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
vga_bridge_in: endpoint {
|
||||
remote-endpoint = <&clcd_pads_vga_dac>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
vga_bridge_out: endpoint {
|
||||
remote-endpoint = <&vga_con_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vga {
|
||||
compatible = "vga-connector";
|
||||
|
||||
port {
|
||||
vga_con_in: endpoint {
|
||||
remote-endpoint = <&vga_bridge_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
uart@100000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x00100000 0x1000>;
|
||||
interrupts-extended = <&impd1_vic 1>;
|
||||
clocks = <&impd1_uartclk>, <&sysclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
uart@200000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x00200000 0x1000>;
|
||||
interrupts-extended = <&impd1_vic 2>;
|
||||
clocks = <&impd1_uartclk>, <&sysclk>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
};
|
||||
|
||||
ssp@300000 {
|
||||
compatible = "arm,pl022", "arm,primecell";
|
||||
reg = <0x00300000 0x1000>;
|
||||
interrupts-extended = <&impd1_vic 3>;
|
||||
clocks = <&impd1_sspclk>, <&sysclk>;
|
||||
clock-names = "spiclk", "apb_pclk";
|
||||
};
|
||||
|
||||
impd1_gpio0: gpio@400000 {
|
||||
compatible = "arm,pl061", "arm,primecell";
|
||||
reg = <0x00400000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts-extended = <&impd1_vic 4>;
|
||||
clocks = <&sysclk>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
|
||||
impd1_gpio1: gpio@500000 {
|
||||
compatible = "arm,pl061", "arm,primecell";
|
||||
reg = <0x00500000 0x1000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts-extended = <&impd1_vic 5>;
|
||||
clocks = <&sysclk>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
|
||||
rtc@600000 {
|
||||
compatible = "arm,pl030", "arm,primecell";
|
||||
reg = <0x00600000 0x1000>;
|
||||
interrupts-extended = <&impd1_vic 6>;
|
||||
clocks = <&sysclk>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
|
||||
mmc@700000 {
|
||||
compatible = "arm,pl181", "arm,primecell";
|
||||
reg = <0x00700000 0x1000>;
|
||||
interrupts-extended = <&impd1_vic 7>,
|
||||
<&impd1_vic 8>;
|
||||
clocks = <&sysclk>, <&sysclk>;
|
||||
clock-names = "mclk", "apb_pclk";
|
||||
bus-width = <1>;
|
||||
max-frequency = <515633>;
|
||||
vmmc-supply = <&impd1_3v3>;
|
||||
wp-gpios = <&impd1_gpio0 3 GPIO_ACTIVE_HIGH>;
|
||||
cd-gpios = <&impd1_gpio0 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
aaci@800000 {
|
||||
compatible = "arm,pl041", "arm,primecell";
|
||||
reg = <0x00800000 0x1000>;
|
||||
interrupts-extended = <&impd1_vic 9>;
|
||||
clocks = <&sysclk>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
|
||||
display@1000000 {
|
||||
compatible = "arm,pl110", "arm,primecell";
|
||||
reg = <0x01000000 0x1000>;
|
||||
interrupts-extended = <&impd1_vic 11>;
|
||||
clocks = <&vco1>, <&sysclk>;
|
||||
clock-names = "clcdclk", "apb_pclk";
|
||||
/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
|
||||
max-memory-bandwidth = <40000000>;
|
||||
memory-region = <&impd1_ram>;
|
||||
|
||||
port@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
clcd_pads_vga_dac: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&vga_bridge_in>;
|
||||
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
impd1_vic: interrupt-controller@3000000 {
|
||||
compatible = "arm,pl192-vic";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0x03000000 0x1000>;
|
||||
/* Valid interrupts, 0-9 and 11 */
|
||||
valid-mask = <0x00000bff>;
|
||||
/* LM site 0 has IRQ 9 on the PIC */
|
||||
interrupts-extended = <&pic 9>;
|
||||
};
|
||||
};
|
||||
|
|
@ -4,7 +4,9 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "integrator.dtsi"
|
||||
#include "integrator.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "ARM Integrator/AP";
|
||||
|
|
@ -107,9 +109,6 @@ auxosc: auxosc@24M {
|
|||
syscon {
|
||||
compatible = "arm,integrator-ap-syscon", "syscon";
|
||||
reg = <0x11000000 0x100>;
|
||||
interrupt-parent = <&pic>;
|
||||
/* These are the logical module IRQs */
|
||||
interrupts = <9>, <10>, <11>, <12>;
|
||||
|
||||
/*
|
||||
* SYSCLK clocks PCIv3 bridge, system controller and the
|
||||
|
|
@ -239,4 +238,50 @@ kmi1: kmi@19000000 {
|
|||
clock-names = "KMIREFCLK", "apb_pclk";
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* Logic module bus, we support up to 4 logical modules
|
||||
* They appear at 0xc0000000, 0xd0000000, 0xe0000000 and 0xf0000000
|
||||
* and use interrupts 9, 10, 11 and 12 respectively.
|
||||
*/
|
||||
bus@c0000000 {
|
||||
compatible = "arm,integrator-ap-lm";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0xc0000000 0xc0000000 0x40000000>;
|
||||
dma-ranges;
|
||||
|
||||
lm0: bus@c0000000 {
|
||||
compatible = "simple-bus";
|
||||
ranges = <0x00000000 0xc0000000 0x10000000>;
|
||||
dma-ranges = <0x00000000 0x80000000 0x10000000>;
|
||||
reg = <0xc0000000 0x10000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
lm1: bus@d0000000 {
|
||||
compatible = "simple-bus";
|
||||
ranges = <0x00000000 0xd0000000 0x10000000>;
|
||||
dma-ranges = <0x00000000 0x80000000 0x10000000>;
|
||||
reg = <0xd0000000 0x10000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
lm2: bus@e0000000 {
|
||||
compatible = "simple-bus";
|
||||
ranges = <0x00000000 0xe0000000 0x10000000>;
|
||||
dma-ranges = <0x00000000 0x80000000 0x10000000>;
|
||||
reg = <0xe0000000 0x10000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
lm3: bus@f0000000 {
|
||||
compatible = "simple-bus";
|
||||
ranges = <0x00000000 0xf0000000 0x10000000>;
|
||||
dma-ranges = <0x00000000 0x80000000 0x10000000>;
|
||||
reg = <0xf0000000 0x10000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue