openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

qed: Set HW-channel to ready before ACKing VF 

When PF responds to the VF requests it also cleans the HW-channel
indication in firmware to allow further VF messages to arrive,
but the order currently applied is wrong -
The PF is copying by DMAE the response the VF is polling on for
completion, and only afterwards sets the HW-channel to ready state.

This creates a race condition where the VF would be able to send
an additional message to the PF before the channel would get ready
again, causing the firmware to consider the VF as malicious.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Mintz, Yuval 2017-03-19 13:08:14 +02:00 committed by David S. Miller
parent 4e9b2a6726
commit d91940818d
1 changed files with 8 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
drivers/net/ethernet/qlogic/qed/qed_sriov.c
View File

@ -1136,13 +1136,17 @@ static void qed_iov_send_response(struct qed_hwfn *p_hwfn,
(sizeof(union pfvf_tlvs) - sizeof(u64)) / 4,
&params);
qed_dmae_host2host(p_hwfn, p_ptt, mbx->reply_phys,
mbx->req_virt->first_tlv.reply_address,
sizeof(u64) / 4, &params);
/* Once PF copies the rc to the VF, the latter can continue
* and send an additional message. So we have to make sure the
* channel would be re-set to ready prior to that.
*/
REG_WR(p_hwfn,
GTT_BAR0_MAP_REG_USDM_RAM +
USTORM_VF_PF_CHANNEL_READY_OFFSET(eng_vf_id), 1);
qed_dmae_host2host(p_hwfn, p_ptt, mbx->reply_phys,
mbx->req_virt->first_tlv.reply_address,
sizeof(u64) / 4, &params);
}
static u16 qed_iov_vport_to_tlv(struct qed_hwfn *p_hwfn,