mirror of https://gitee.com/openkylin/linux.git
power: Add twl4030_madc battery driver.
This driver is used and tested on gta04 phone. It's using twl4030_madc (similar to rx51 existing driver). Driver also implement charging and discharging calibration data so user can define ranges and level. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Lukas Märdian <lukas@goldelico.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
This commit is contained in:
parent
d24fed391d
commit
da0a00ebc2
|
@ -216,6 +216,13 @@ config BATTERY_S3C_ADC
|
|||
help
|
||||
Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
|
||||
|
||||
config BATTERY_TWL4030_MADC
|
||||
tristate "TWL4030 MADC battery driver"
|
||||
depends on TWL4030_MADC
|
||||
help
|
||||
Say Y here to enable this dumb driver for batteries managed
|
||||
through the TWL4030 MADC.
|
||||
|
||||
config CHARGER_88PM860X
|
||||
tristate "Marvell 88PM860x Charger driver"
|
||||
depends on MFD_88PM860X && BATTERY_88PM860X
|
||||
|
|
|
@ -34,6 +34,7 @@ obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
|
|||
obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o
|
||||
obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
|
||||
obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o
|
||||
obj-$(CONFIG_BATTERY_TWL4030_MADC) += twl4030_madc_battery.o
|
||||
obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o
|
||||
obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
|
||||
obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
|
||||
|
|
|
@ -0,0 +1,245 @@
|
|||
/*
|
||||
* Dumb driver for LiIon batteries using TWL4030 madc.
|
||||
*
|
||||
* Copyright 2013 Golden Delicious Computers
|
||||
* Lukas Märdian <lukas@goldelico.com>
|
||||
*
|
||||
* Based on dumb driver for gta01 battery
|
||||
* Copyright 2009 Openmoko, Inc
|
||||
* Balaji Rao <balajirrao@openmoko.org>
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/param.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/workqueue.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/power_supply.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/sort.h>
|
||||
#include <linux/i2c/twl4030-madc.h>
|
||||
#include <linux/power/twl4030_madc_battery.h>
|
||||
|
||||
struct twl4030_madc_battery {
|
||||
struct power_supply psy;
|
||||
struct twl4030_madc_bat_platform_data *pdata;
|
||||
};
|
||||
|
||||
static enum power_supply_property twl4030_madc_bat_props[] = {
|
||||
POWER_SUPPLY_PROP_PRESENT,
|
||||
POWER_SUPPLY_PROP_STATUS,
|
||||
POWER_SUPPLY_PROP_TECHNOLOGY,
|
||||
POWER_SUPPLY_PROP_VOLTAGE_NOW,
|
||||
POWER_SUPPLY_PROP_CURRENT_NOW,
|
||||
POWER_SUPPLY_PROP_CAPACITY,
|
||||
POWER_SUPPLY_PROP_CHARGE_FULL,
|
||||
POWER_SUPPLY_PROP_CHARGE_NOW,
|
||||
POWER_SUPPLY_PROP_TEMP,
|
||||
POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
|
||||
};
|
||||
|
||||
static int madc_read(int index)
|
||||
{
|
||||
struct twl4030_madc_request req;
|
||||
int val;
|
||||
|
||||
req.channels = index;
|
||||
req.method = TWL4030_MADC_SW2;
|
||||
req.type = TWL4030_MADC_WAIT;
|
||||
req.do_avg = 0;
|
||||
req.raw = false;
|
||||
req.func_cb = NULL;
|
||||
|
||||
val = twl4030_madc_conversion(&req);
|
||||
if (val < 0)
|
||||
return val;
|
||||
|
||||
return req.rbuf[ffs(index) - 1];
|
||||
}
|
||||
|
||||
static int twl4030_madc_bat_get_charging_status(void)
|
||||
{
|
||||
return (madc_read(TWL4030_MADC_ICHG) > 0) ? 1 : 0;
|
||||
}
|
||||
|
||||
static int twl4030_madc_bat_get_voltage(void)
|
||||
{
|
||||
return madc_read(TWL4030_MADC_VBAT);
|
||||
}
|
||||
|
||||
static int twl4030_madc_bat_get_current(void)
|
||||
{
|
||||
return madc_read(TWL4030_MADC_ICHG) * 1000;
|
||||
}
|
||||
|
||||
static int twl4030_madc_bat_get_temp(void)
|
||||
{
|
||||
return madc_read(TWL4030_MADC_BTEMP) * 10;
|
||||
}
|
||||
|
||||
static int twl4030_madc_bat_voltscale(struct twl4030_madc_battery *bat,
|
||||
int volt)
|
||||
{
|
||||
struct twl4030_madc_bat_calibration *calibration;
|
||||
int i, res = 0;
|
||||
|
||||
/* choose charging curve */
|
||||
if (twl4030_madc_bat_get_charging_status())
|
||||
calibration = bat->pdata->charging;
|
||||
else
|
||||
calibration = bat->pdata->discharging;
|
||||
|
||||
if (volt > calibration[0].voltage) {
|
||||
res = calibration[0].level;
|
||||
} else {
|
||||
for (i = 0; calibration[i+1].voltage >= 0; i++) {
|
||||
if (volt <= calibration[i].voltage &&
|
||||
volt >= calibration[i+1].voltage) {
|
||||
/* interval found - interpolate within range */
|
||||
res = calibration[i].level -
|
||||
((calibration[i].voltage - volt) *
|
||||
(calibration[i].level -
|
||||
calibration[i+1].level)) /
|
||||
(calibration[i].voltage -
|
||||
calibration[i+1].voltage);
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
return res;
|
||||
}
|
||||
|
||||
static int twl4030_madc_bat_get_property(struct power_supply *psy,
|
||||
enum power_supply_property psp,
|
||||
union power_supply_propval *val)
|
||||
{
|
||||
struct twl4030_madc_battery *bat = container_of(psy,
|
||||
struct twl4030_madc_battery, psy);
|
||||
|
||||
switch (psp) {
|
||||
case POWER_SUPPLY_PROP_STATUS:
|
||||
if (twl4030_madc_bat_voltscale(bat,
|
||||
twl4030_madc_bat_get_voltage()) > 95)
|
||||
val->intval = POWER_SUPPLY_STATUS_FULL;
|
||||
else {
|
||||
if (twl4030_madc_bat_get_charging_status())
|
||||
val->intval = POWER_SUPPLY_STATUS_CHARGING;
|
||||
else
|
||||
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
|
||||
}
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
||||
val->intval = twl4030_madc_bat_get_voltage() * 1000;
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_TECHNOLOGY:
|
||||
val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_CURRENT_NOW:
|
||||
val->intval = twl4030_madc_bat_get_current();
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_PRESENT:
|
||||
/* assume battery is always present */
|
||||
val->intval = 1;
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_CHARGE_NOW: {
|
||||
int percent = twl4030_madc_bat_voltscale(bat,
|
||||
twl4030_madc_bat_get_voltage());
|
||||
val->intval = (percent * bat->pdata->capacity) / 100;
|
||||
break;
|
||||
}
|
||||
case POWER_SUPPLY_PROP_CAPACITY:
|
||||
val->intval = twl4030_madc_bat_voltscale(bat,
|
||||
twl4030_madc_bat_get_voltage());
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_CHARGE_FULL:
|
||||
val->intval = bat->pdata->capacity;
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_TEMP:
|
||||
val->intval = twl4030_madc_bat_get_temp();
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: {
|
||||
int percent = twl4030_madc_bat_voltscale(bat,
|
||||
twl4030_madc_bat_get_voltage());
|
||||
/* in mAh */
|
||||
int chg = (percent * (bat->pdata->capacity/1000))/100;
|
||||
|
||||
/* assume discharge with 400 mA (ca. 1.5W) */
|
||||
val->intval = (3600l * chg) / 400;
|
||||
break;
|
||||
}
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void twl4030_madc_bat_ext_changed(struct power_supply *psy)
|
||||
{
|
||||
struct twl4030_madc_battery *bat = container_of(psy,
|
||||
struct twl4030_madc_battery, psy);
|
||||
|
||||
power_supply_changed(&bat->psy);
|
||||
}
|
||||
|
||||
static int twl4030_cmp(const void *a, const void *b)
|
||||
{
|
||||
return ((struct twl4030_madc_bat_calibration *)b)->voltage -
|
||||
((struct twl4030_madc_bat_calibration *)a)->voltage;
|
||||
}
|
||||
|
||||
static int twl4030_madc_battery_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct twl4030_madc_battery *twl4030_madc_bat;
|
||||
struct twl4030_madc_bat_platform_data *pdata = pdev->dev.platform_data;
|
||||
|
||||
twl4030_madc_bat = kzalloc(sizeof(*twl4030_madc_bat), GFP_KERNEL);
|
||||
if (!twl4030_madc_bat)
|
||||
return -ENOMEM;
|
||||
|
||||
twl4030_madc_bat->psy.name = "twl4030_battery";
|
||||
twl4030_madc_bat->psy.type = POWER_SUPPLY_TYPE_BATTERY;
|
||||
twl4030_madc_bat->psy.properties = twl4030_madc_bat_props;
|
||||
twl4030_madc_bat->psy.num_properties =
|
||||
ARRAY_SIZE(twl4030_madc_bat_props);
|
||||
twl4030_madc_bat->psy.get_property = twl4030_madc_bat_get_property;
|
||||
twl4030_madc_bat->psy.external_power_changed =
|
||||
twl4030_madc_bat_ext_changed;
|
||||
|
||||
/* sort charging and discharging calibration data */
|
||||
sort(pdata->charging, pdata->charging_size,
|
||||
sizeof(struct twl4030_madc_bat_calibration),
|
||||
twl4030_cmp, NULL);
|
||||
sort(pdata->discharging, pdata->discharging_size,
|
||||
sizeof(struct twl4030_madc_bat_calibration),
|
||||
twl4030_cmp, NULL);
|
||||
|
||||
twl4030_madc_bat->pdata = pdata;
|
||||
platform_set_drvdata(pdev, twl4030_madc_bat);
|
||||
power_supply_register(&pdev->dev, &twl4030_madc_bat->psy);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int twl4030_madc_battery_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct twl4030_madc_battery *bat = platform_get_drvdata(pdev);
|
||||
|
||||
power_supply_unregister(&bat->psy);
|
||||
kfree(bat);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver twl4030_madc_battery_driver = {
|
||||
.driver = {
|
||||
.name = "twl4030_madc_battery",
|
||||
},
|
||||
.probe = twl4030_madc_battery_probe,
|
||||
.remove = twl4030_madc_battery_remove,
|
||||
};
|
||||
module_platform_driver(twl4030_madc_battery_driver);
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_AUTHOR("Lukas Märdian <lukas@goldelico.com>");
|
||||
MODULE_DESCRIPTION("twl4030_madc battery driver");
|
|
@ -0,0 +1,39 @@
|
|||
/*
|
||||
* Dumb driver for LiIon batteries using TWL4030 madc.
|
||||
*
|
||||
* Copyright 2013 Golden Delicious Computers
|
||||
* Nikolaus Schaller <hns@goldelico.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef __TWL4030_MADC_BATTERY_H
|
||||
#define __TWL4030_MADC_BATTERY_H
|
||||
|
||||
/*
|
||||
* Usually we can assume 100% @ 4.15V and 0% @ 3.3V but curves differ for
|
||||
* charging and discharging!
|
||||
*/
|
||||
|
||||
struct twl4030_madc_bat_calibration {
|
||||
short voltage; /* in mV - specify -1 for end of list */
|
||||
short level; /* in percent (0 .. 100%) */
|
||||
};
|
||||
|
||||
struct twl4030_madc_bat_platform_data {
|
||||
unsigned int capacity; /* total capacity in uAh */
|
||||
struct twl4030_madc_bat_calibration *charging;
|
||||
int charging_size;
|
||||
struct twl4030_madc_bat_calibration *discharging;
|
||||
int discharging_size;
|
||||
};
|
||||
|
||||
#endif
|
Loading…
Reference in New Issue