mirror of https://gitee.com/openkylin/linux.git
arm64: dts: ls1028a: fix memory node
While enabling EDAC support for the LS1028A it was discovered that the
memory node has a wrong endianness setting as well as a wrong interrupt
assignment. Fix both.
This was tested on a sl28 board. To force ECC errors, you can use the
error injection supported by the controller in hardware (with
CONFIG_EDAC_DEBUG enabled):
# enable error injection
$ echo 0x100 > /sys/devices/system/edac/mc/mc0/inject_ctrl
# flip lowest bit of the data
$ echo 0x1 > /sys/devices/system/edac/mc/mc0/inject_data_lo
Fixes: 8897f3255c
("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
parent
8967b27a6c
commit
dabea675fa
|
@ -197,8 +197,8 @@ soc: soc {
|
|||
ddr: memory-controller@1080000 {
|
||||
compatible = "fsl,qoriq-memory-controller";
|
||||
reg = <0x0 0x1080000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
|
||||
big-endian;
|
||||
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
||||
little-endian;
|
||||
};
|
||||
|
||||
dcfg: syscon@1e00000 {
|
||||
|
|
Loading…
Reference in New Issue