mirror of https://gitee.com/openkylin/linux.git
iio: adc: Add support for axp288 adc
Platform driver for X-Powers AXP288 ADC, which is a sub-device of the customized AXP288 PMIC for Intel Baytrail-CR platforms. GPADC device enumerates as one of the MFD cell devices. It uses IIO infrastructure to communicate with userspace and consumer drivers. Usages of ADC channels include battery charging and thermal sensors. Based on initial work by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
Jacob Pan
Lee Jones
parent
af7e906954
commit
de89bd7f21
|
|
@ -127,6 +127,14 @@ config AT91_ADC
|
|||
help
|
||||
Say yes here to build support for Atmel AT91 ADC.
|
||||
|
||||
config AXP288_ADC
|
||||
tristate "X-Powers AXP288 ADC driver"
|
||||
depends on MFD_AXP20X
|
||||
help
|
||||
Say yes here to have support for X-Powers power management IC (PMIC) ADC
|
||||
device. Depending on platform configuration, this general purpose ADC can
|
||||
be used for sampling sensors such as thermal resistors.
|
||||
|
||||
config EXYNOS_ADC
|
||||
tristate "Exynos ADC driver support"
|
||||
depends on ARCH_EXYNOS || (OF && COMPILE_TEST)
|
||||
|
|
|
|||
|
|
@ -14,6 +14,7 @@ obj-$(CONFIG_AD7793) += ad7793.o
|
|||
obj-$(CONFIG_AD7887) += ad7887.o
|
||||
obj-$(CONFIG_AD799X) += ad799x.o
|
||||
obj-$(CONFIG_AT91_ADC) += at91_adc.o
|
||||
obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
|
||||
obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
|
||||
obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
|
||||
obj-$(CONFIG_MAX1027) += max1027.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,254 @@
|
|||
/*
|
||||
* axp288_adc.c - X-Powers AXP288 PMIC ADC Driver
|
||||
*
|
||||
* Copyright (C) 2014 Intel Corporation
|
||||
*
|
||||
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but
|
||||
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
* General Public License for more details.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/mfd/axp20x.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/iio/machine.h>
|
||||
#include <linux/iio/driver.h>
|
||||
|
||||
#define AXP288_ADC_EN_MASK 0xF1
|
||||
#define AXP288_ADC_TS_PIN_GPADC 0xF2
|
||||
#define AXP288_ADC_TS_PIN_ON 0xF3
|
||||
|
||||
enum axp288_adc_id {
|
||||
AXP288_ADC_TS,
|
||||
AXP288_ADC_PMIC,
|
||||
AXP288_ADC_GP,
|
||||
AXP288_ADC_BATT_CHRG_I,
|
||||
AXP288_ADC_BATT_DISCHRG_I,
|
||||
AXP288_ADC_BATT_V,
|
||||
AXP288_ADC_NR_CHAN,
|
||||
};
|
||||
|
||||
struct axp288_adc_info {
|
||||
int irq;
|
||||
struct regmap *regmap;
|
||||
};
|
||||
|
||||
static const struct iio_chan_spec const axp288_adc_channels[] = {
|
||||
{
|
||||
.indexed = 1,
|
||||
.type = IIO_TEMP,
|
||||
.channel = 0,
|
||||
.address = AXP288_TS_ADC_H,
|
||||
.datasheet_name = "TS_PIN",
|
||||
}, {
|
||||
.indexed = 1,
|
||||
.type = IIO_TEMP,
|
||||
.channel = 1,
|
||||
.address = AXP288_PMIC_ADC_H,
|
||||
.datasheet_name = "PMIC_TEMP",
|
||||
}, {
|
||||
.indexed = 1,
|
||||
.type = IIO_TEMP,
|
||||
.channel = 2,
|
||||
.address = AXP288_GP_ADC_H,
|
||||
.datasheet_name = "GPADC",
|
||||
}, {
|
||||
.indexed = 1,
|
||||
.type = IIO_CURRENT,
|
||||
.channel = 3,
|
||||
.address = AXP20X_BATT_CHRG_I_H,
|
||||
.datasheet_name = "BATT_CHG_I",
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
|
||||
}, {
|
||||
.indexed = 1,
|
||||
.type = IIO_CURRENT,
|
||||
.channel = 4,
|
||||
.address = AXP20X_BATT_DISCHRG_I_H,
|
||||
.datasheet_name = "BATT_DISCHRG_I",
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
|
||||
}, {
|
||||
.indexed = 1,
|
||||
.type = IIO_VOLTAGE,
|
||||
.channel = 5,
|
||||
.address = AXP20X_BATT_V_H,
|
||||
.datasheet_name = "BATT_V",
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
|
||||
},
|
||||
};
|
||||
|
||||
#define AXP288_ADC_MAP(_adc_channel_label, _consumer_dev_name, \
|
||||
_consumer_channel) \
|
||||
{ \
|
||||
.adc_channel_label = _adc_channel_label, \
|
||||
.consumer_dev_name = _consumer_dev_name, \
|
||||
.consumer_channel = _consumer_channel, \
|
||||
}
|
||||
|
||||
/* for consumer drivers */
|
||||
static struct iio_map axp288_adc_default_maps[] = {
|
||||
AXP288_ADC_MAP("TS_PIN", "axp288-batt", "axp288-batt-temp"),
|
||||
AXP288_ADC_MAP("PMIC_TEMP", "axp288-pmic", "axp288-pmic-temp"),
|
||||
AXP288_ADC_MAP("GPADC", "axp288-gpadc", "axp288-system-temp"),
|
||||
AXP288_ADC_MAP("BATT_CHG_I", "axp288-chrg", "axp288-chrg-curr"),
|
||||
AXP288_ADC_MAP("BATT_DISCHRG_I", "axp288-chrg", "axp288-chrg-d-curr"),
|
||||
AXP288_ADC_MAP("BATT_V", "axp288-batt", "axp288-batt-volt"),
|
||||
{},
|
||||
};
|
||||
|
||||
static int axp288_adc_read_channel(int *val, unsigned long address,
|
||||
struct regmap *regmap)
|
||||
{
|
||||
u8 buf[2];
|
||||
|
||||
if (regmap_bulk_read(regmap, address, buf, 2))
|
||||
return -EIO;
|
||||
*val = (buf[0] << 4) + ((buf[1] >> 4) & 0x0F);
|
||||
|
||||
return IIO_VAL_INT;
|
||||
}
|
||||
|
||||
static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode,
|
||||
unsigned long address)
|
||||
{
|
||||
/* channels other than GPADC do not need to switch TS pin */
|
||||
if (address != AXP288_GP_ADC_H)
|
||||
return 0;
|
||||
|
||||
return regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode);
|
||||
}
|
||||
|
||||
static int axp288_adc_read_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int *val, int *val2, long mask)
|
||||
{
|
||||
int ret;
|
||||
struct axp288_adc_info *info = iio_priv(indio_dev);
|
||||
|
||||
mutex_lock(&indio_dev->mlock);
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_RAW:
|
||||
if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC,
|
||||
chan->address)) {
|
||||
dev_err(&indio_dev->dev, "GPADC mode\n");
|
||||
ret = -EINVAL;
|
||||
break;
|
||||
}
|
||||
ret = axp288_adc_read_channel(val, chan->address, info->regmap);
|
||||
if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON,
|
||||
chan->address))
|
||||
dev_err(&indio_dev->dev, "TS pin restore\n");
|
||||
break;
|
||||
case IIO_CHAN_INFO_PROCESSED:
|
||||
ret = axp288_adc_read_channel(val, chan->address, info->regmap);
|
||||
break;
|
||||
default:
|
||||
ret = -EINVAL;
|
||||
}
|
||||
mutex_unlock(&indio_dev->mlock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int axp288_adc_set_state(struct regmap *regmap)
|
||||
{
|
||||
/* ADC should be always enabled for internal FG to function */
|
||||
if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON))
|
||||
return -EIO;
|
||||
|
||||
return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
|
||||
}
|
||||
|
||||
static const struct iio_info axp288_adc_iio_info = {
|
||||
.read_raw = &axp288_adc_read_raw,
|
||||
.driver_module = THIS_MODULE,
|
||||
};
|
||||
|
||||
static int axp288_adc_probe(struct platform_device *pdev)
|
||||
{
|
||||
int ret;
|
||||
struct axp288_adc_info *info;
|
||||
struct iio_dev *indio_dev;
|
||||
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
|
||||
|
||||
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
|
||||
if (!indio_dev)
|
||||
return -ENOMEM;
|
||||
|
||||
info = iio_priv(indio_dev);
|
||||
info->irq = platform_get_irq(pdev, 0);
|
||||
if (info->irq < 0) {
|
||||
dev_err(&pdev->dev, "no irq resource?\n");
|
||||
return info->irq;
|
||||
}
|
||||
platform_set_drvdata(pdev, indio_dev);
|
||||
info->regmap = axp20x->regmap;
|
||||
/*
|
||||
* Set ADC to enabled state at all time, including system suspend.
|
||||
* otherwise internal fuel gauge functionality may be affected.
|
||||
*/
|
||||
ret = axp288_adc_set_state(axp20x->regmap);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "unable to enable ADC device\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
indio_dev->dev.parent = &pdev->dev;
|
||||
indio_dev->name = pdev->name;
|
||||
indio_dev->channels = axp288_adc_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(axp288_adc_channels);
|
||||
indio_dev->info = &axp288_adc_iio_info;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
ret = iio_map_array_register(indio_dev, axp288_adc_default_maps);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = iio_device_register(indio_dev);
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "unable to register iio device\n");
|
||||
goto err_array_unregister;
|
||||
}
|
||||
return 0;
|
||||
|
||||
err_array_unregister:
|
||||
iio_map_array_unregister(indio_dev);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int axp288_adc_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
||||
|
||||
iio_device_unregister(indio_dev);
|
||||
iio_map_array_unregister(indio_dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver axp288_adc_driver = {
|
||||
.probe = axp288_adc_probe,
|
||||
.remove = axp288_adc_remove,
|
||||
.driver = {
|
||||
.name = "axp288_adc",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(axp288_adc_driver);
|
||||
|
||||
MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@linux.intel.com>");
|
||||
MODULE_DESCRIPTION("X-Powers AXP288 ADC Driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue