e1000e: Make speed detection on hotplugging cable more reliable

After hot plugging an 1Gbps Ethernet cable with 1Gbps link partner, the
MII_BMSR may report 10Mbps, renders the network rather slow.

The issue has much lower fail rate after commit 59653e6497 ("e1000e:
Make watchdog use delayed work"), which essentially introduces some
delay before running the watchdog task.

But there's still a chance that the hot plugging event and the queued
watchdog task gets run at the same time, then the original issue can be
observed once again.

So let's use mod_delayed_work() to add a deterministic 1 second delay
before running watchdog task, after an interrupt.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This commit is contained in:
Kai-Heng Feng 2019-07-15 20:25:55 +08:00 committed by Jeff Kirsher
parent d7cb9da186
commit dee23594d5
1 changed files with 6 additions and 6 deletions

View File

@ -1780,8 +1780,8 @@ static irqreturn_t e1000_intr_msi(int __always_unused irq, void *data)
}
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->state))
queue_delayed_work(adapter->e1000_workqueue,
&adapter->watchdog_task, 1);
mod_delayed_work(adapter->e1000_workqueue,
&adapter->watchdog_task, HZ);
}
/* Reset on uncorrectable ECC error */
@ -1861,8 +1861,8 @@ static irqreturn_t e1000_intr(int __always_unused irq, void *data)
}
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->state))
queue_delayed_work(adapter->e1000_workqueue,
&adapter->watchdog_task, 1);
mod_delayed_work(adapter->e1000_workqueue,
&adapter->watchdog_task, HZ);
}
/* Reset on uncorrectable ECC error */
@ -1907,8 +1907,8 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data)
hw->mac.get_link_status = true;
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->state))
queue_delayed_work(adapter->e1000_workqueue,
&adapter->watchdog_task, 1);
mod_delayed_work(adapter->e1000_workqueue,
&adapter->watchdog_task, HZ);
}
if (!test_bit(__E1000_DOWN, &adapter->state))