mirror of https://gitee.com/openkylin/linux.git
ARM: imx: Remove i.MX35 board files
i.MX35 has basic device tree support. To achieve the goal of converting all i.MX SoCs to a devicetree-only platform, remove imx35 board files. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Fabio Estevam
Shawn Guo
parent
c93197b004
commit
e1324ece2a
|
|
@ -15,11 +15,8 @@ CONFIG_PERF_EVENTS=y
|
|||
# CONFIG_COMPAT_BRK is not set
|
||||
CONFIG_ARCH_MULTI_V6=y
|
||||
CONFIG_ARCH_MXC=y
|
||||
CONFIG_MACH_IMX35_DT=y
|
||||
CONFIG_MACH_PCM043=y
|
||||
CONFIG_MACH_MX35_3DS=y
|
||||
CONFIG_MACH_VPR200=y
|
||||
CONFIG_SOC_IMX31=y
|
||||
CONFIG_SOC_IMX35=y
|
||||
CONFIG_SOC_IMX50=y
|
||||
CONFIG_SOC_IMX51=y
|
||||
CONFIG_SOC_IMX53=y
|
||||
|
|
|
|||
|
|
@ -53,14 +53,10 @@ config IMX_HAVE_IOMUX_V1
|
|||
config ARCH_MXC_IOMUX_V3
|
||||
bool
|
||||
|
||||
config SOC_IMX35
|
||||
bool
|
||||
select ARCH_MXC_IOMUX_V3
|
||||
select MXC_AVIC
|
||||
select PINCTRL_IMX35
|
||||
|
||||
if ARCH_MULTI_V6
|
||||
|
||||
comment "ARM1136 platforms"
|
||||
|
||||
config SOC_IMX31
|
||||
bool "i.MX31 support"
|
||||
select CPU_V6
|
||||
|
|
@ -68,66 +64,13 @@ config SOC_IMX31
|
|||
help
|
||||
This enables support for Freescale i.MX31 processor
|
||||
|
||||
comment "MX35 platforms:"
|
||||
|
||||
config MACH_IMX35_DT
|
||||
bool "Support i.MX35 platforms from device tree"
|
||||
select SOC_IMX35
|
||||
config SOC_IMX35
|
||||
bool "i.MX35 support"
|
||||
select ARCH_MXC_IOMUX_V3
|
||||
select MXC_AVIC
|
||||
select PINCTRL_IMX35
|
||||
help
|
||||
Include support for Freescale i.MX35 based platforms
|
||||
using the device tree for discovery.
|
||||
|
||||
config MACH_PCM043
|
||||
bool "Support Phytec pcm043 (i.MX35) platforms"
|
||||
select IMX_HAVE_PLATFORM_FLEXCAN
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_SSI
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_IPU_CORE
|
||||
select IMX_HAVE_PLATFORM_MXC_EHCI
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
||||
select USB_ULPI_VIEWPORT if USB_ULPI
|
||||
select SOC_IMX35
|
||||
help
|
||||
Include support for Phytec pcm043 platform. This includes
|
||||
specific configurations for the board and its peripherals.
|
||||
|
||||
config MACH_MX35_3DS
|
||||
bool "Support MX35PDK platform"
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_FB
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_IPU_CORE
|
||||
select IMX_HAVE_PLATFORM_MXC_EHCI
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_MXC_RTC
|
||||
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
||||
select MXC_DEBUG_BOARD
|
||||
select SOC_IMX35
|
||||
help
|
||||
Include support for MX35PDK platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
||||
config MACH_VPR200
|
||||
bool "Support VPR200 platform"
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_IPU_CORE
|
||||
select IMX_HAVE_PLATFORM_MXC_EHCI
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
||||
select SOC_IMX35
|
||||
help
|
||||
Include support for VPR200 platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
This enables support for Freescale i.MX31 processor
|
||||
|
||||
endif
|
||||
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o mach-imx27.o
|
|||
obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o
|
||||
|
||||
obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o mach-imx31.o
|
||||
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o
|
||||
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o mach-imx35.o
|
||||
|
||||
imx5-pm-$(CONFIG_PM) += pm-imx5.o
|
||||
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)
|
||||
|
|
@ -35,12 +35,6 @@ obj-y += ssi-fiq.o
|
|||
obj-y += ssi-fiq-ksym.o
|
||||
endif
|
||||
|
||||
# i.MX35 based machines
|
||||
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
|
||||
obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
|
||||
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
|
||||
obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o
|
||||
|
||||
obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
|
||||
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
|
||||
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
|
||||
|
|
|
|||
|
|
@ -1,516 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
|
||||
* Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
|
||||
*
|
||||
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
||||
*
|
||||
* Copyright (C) 2011 Meprolight, Ltd.
|
||||
* Alex Gershgorin <alexg@meprolight.com>
|
||||
*
|
||||
* Modified from i.MX31 3-Stack Development System
|
||||
*/
|
||||
|
||||
/*
|
||||
* This machine is known as:
|
||||
* - i.MX35 3-Stack Development System
|
||||
* - i.MX35 Platform Development Kit (i.MX35 PDK)
|
||||
*/
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/memory.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/usb/otg.h>
|
||||
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/mfd/mc13892.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/time.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include <video/platform_lcd.h>
|
||||
|
||||
#include "3ds_debugboard.h"
|
||||
#include "common.h"
|
||||
#include "devices-imx35.h"
|
||||
#include "ehci.h"
|
||||
#include "hardware.h"
|
||||
#include "iomux-mx35.h"
|
||||
|
||||
#define GPIO_MC9S08DZ60_GPS_ENABLE 0
|
||||
#define GPIO_MC9S08DZ60_HDD_ENABLE 4
|
||||
#define GPIO_MC9S08DZ60_WIFI_ENABLE 5
|
||||
#define GPIO_MC9S08DZ60_LCD_ENABLE 6
|
||||
#define GPIO_MC9S08DZ60_SPEAKER_ENABLE 8
|
||||
|
||||
static const struct fb_videomode fb_modedb[] = {
|
||||
{
|
||||
/* 800x480 @ 55 Hz */
|
||||
.name = "Ceramate-CLAA070VC01",
|
||||
.refresh = 55,
|
||||
.xres = 800,
|
||||
.yres = 480,
|
||||
.pixclock = 40000,
|
||||
.left_margin = 40,
|
||||
.right_margin = 40,
|
||||
.upper_margin = 5,
|
||||
.lower_margin = 5,
|
||||
.hsync_len = 20,
|
||||
.vsync_len = 10,
|
||||
.sync = FB_SYNC_OE_ACT_HIGH,
|
||||
.vmode = FB_VMODE_NONINTERLACED,
|
||||
.flag = 0,
|
||||
},
|
||||
};
|
||||
|
||||
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
|
||||
.name = "Ceramate-CLAA070VC01",
|
||||
.mode = fb_modedb,
|
||||
.num_modes = ARRAY_SIZE(fb_modedb),
|
||||
};
|
||||
|
||||
static struct i2c_board_info __initdata i2c_devices_3ds[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("mc9s08dz60", 0x69),
|
||||
},
|
||||
};
|
||||
|
||||
static int lcd_power_gpio = -ENXIO;
|
||||
|
||||
static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, void *data)
|
||||
{
|
||||
return !strcmp(chip->label, data);
|
||||
}
|
||||
|
||||
static void mx35_3ds_lcd_set_power(
|
||||
struct plat_lcd_data *pd, unsigned int power)
|
||||
{
|
||||
struct gpio_chip *chip;
|
||||
|
||||
if (!gpio_is_valid(lcd_power_gpio)) {
|
||||
chip = gpiochip_find(
|
||||
"mc9s08dz60", mc9s08dz60_gpiochip_match);
|
||||
if (chip) {
|
||||
lcd_power_gpio =
|
||||
chip->base + GPIO_MC9S08DZ60_LCD_ENABLE;
|
||||
if (gpio_request(lcd_power_gpio, "lcd_power") < 0) {
|
||||
pr_err("error: gpio already requested!\n");
|
||||
lcd_power_gpio = -ENXIO;
|
||||
}
|
||||
} else {
|
||||
pr_err("error: didn't find mc9s08dz60 gpio chip\n");
|
||||
}
|
||||
}
|
||||
|
||||
if (gpio_is_valid(lcd_power_gpio))
|
||||
gpio_set_value_cansleep(lcd_power_gpio, power);
|
||||
}
|
||||
|
||||
static struct plat_lcd_data mx35_3ds_lcd_data = {
|
||||
.set_power = mx35_3ds_lcd_set_power,
|
||||
};
|
||||
|
||||
static struct platform_device mx35_3ds_lcd = {
|
||||
.name = "platform-lcd",
|
||||
.dev.platform_data = &mx35_3ds_lcd_data,
|
||||
};
|
||||
|
||||
static const struct imxuart_platform_data uart_pdata __initconst = {
|
||||
.flags = IMXUART_HAVE_RTSCTS,
|
||||
};
|
||||
|
||||
static struct physmap_flash_data mx35pdk_flash_data = {
|
||||
.width = 2,
|
||||
};
|
||||
|
||||
static struct resource mx35pdk_flash_resource = {
|
||||
.start = MX35_CS0_BASE_ADDR,
|
||||
.end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct platform_device mx35pdk_flash = {
|
||||
.name = "physmap-flash",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &mx35pdk_flash_data,
|
||||
},
|
||||
.resource = &mx35pdk_flash_resource,
|
||||
.num_resources = 1,
|
||||
};
|
||||
|
||||
static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = {
|
||||
.width = 1,
|
||||
.hw_ecc = 1,
|
||||
.flash_bbt = 1,
|
||||
};
|
||||
|
||||
static struct platform_device *devices[] __initdata = {
|
||||
&mx35pdk_flash,
|
||||
};
|
||||
|
||||
static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = {
|
||||
/* UART1 */
|
||||
MX35_PAD_CTS1__UART1_CTS,
|
||||
MX35_PAD_RTS1__UART1_RTS,
|
||||
MX35_PAD_TXD1__UART1_TXD_MUX,
|
||||
MX35_PAD_RXD1__UART1_RXD_MUX,
|
||||
/* FEC */
|
||||
MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
|
||||
MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
|
||||
MX35_PAD_FEC_RX_DV__FEC_RX_DV,
|
||||
MX35_PAD_FEC_COL__FEC_COL,
|
||||
MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
|
||||
MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
|
||||
MX35_PAD_FEC_TX_EN__FEC_TX_EN,
|
||||
MX35_PAD_FEC_MDC__FEC_MDC,
|
||||
MX35_PAD_FEC_MDIO__FEC_MDIO,
|
||||
MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
|
||||
MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
|
||||
MX35_PAD_FEC_CRS__FEC_CRS,
|
||||
MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
|
||||
MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
|
||||
MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
|
||||
MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
|
||||
MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
|
||||
MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
|
||||
/* USBOTG */
|
||||
MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
|
||||
MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
|
||||
/* USBH1 */
|
||||
MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
|
||||
MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
|
||||
/* SDCARD */
|
||||
MX35_PAD_SD1_CMD__ESDHC1_CMD,
|
||||
MX35_PAD_SD1_CLK__ESDHC1_CLK,
|
||||
MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
|
||||
MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
|
||||
MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
|
||||
MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
|
||||
/* I2C1 */
|
||||
MX35_PAD_I2C1_CLK__I2C1_SCL,
|
||||
MX35_PAD_I2C1_DAT__I2C1_SDA,
|
||||
/* Display */
|
||||
MX35_PAD_LD0__IPU_DISPB_DAT_0,
|
||||
MX35_PAD_LD1__IPU_DISPB_DAT_1,
|
||||
MX35_PAD_LD2__IPU_DISPB_DAT_2,
|
||||
MX35_PAD_LD3__IPU_DISPB_DAT_3,
|
||||
MX35_PAD_LD4__IPU_DISPB_DAT_4,
|
||||
MX35_PAD_LD5__IPU_DISPB_DAT_5,
|
||||
MX35_PAD_LD6__IPU_DISPB_DAT_6,
|
||||
MX35_PAD_LD7__IPU_DISPB_DAT_7,
|
||||
MX35_PAD_LD8__IPU_DISPB_DAT_8,
|
||||
MX35_PAD_LD9__IPU_DISPB_DAT_9,
|
||||
MX35_PAD_LD10__IPU_DISPB_DAT_10,
|
||||
MX35_PAD_LD11__IPU_DISPB_DAT_11,
|
||||
MX35_PAD_LD12__IPU_DISPB_DAT_12,
|
||||
MX35_PAD_LD13__IPU_DISPB_DAT_13,
|
||||
MX35_PAD_LD14__IPU_DISPB_DAT_14,
|
||||
MX35_PAD_LD15__IPU_DISPB_DAT_15,
|
||||
MX35_PAD_LD16__IPU_DISPB_DAT_16,
|
||||
MX35_PAD_LD17__IPU_DISPB_DAT_17,
|
||||
MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
|
||||
MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
|
||||
MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
|
||||
MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
|
||||
MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
|
||||
MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
|
||||
MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
|
||||
/*PMIC IRQ*/
|
||||
MX35_PAD_GPIO2_0__GPIO2_0,
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply sw1_consumers[] = {
|
||||
{
|
||||
.supply = "cpu_vcc",
|
||||
}
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply vcam_consumers[] = {
|
||||
/* sgtl5000 */
|
||||
REGULATOR_SUPPLY("VDDA", "0-000a"),
|
||||
};
|
||||
|
||||
static struct regulator_init_data sw1_init = {
|
||||
.constraints = {
|
||||
.name = "SW1",
|
||||
.min_uV = 600000,
|
||||
.max_uV = 1375000,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
|
||||
.valid_modes_mask = 0,
|
||||
.always_on = 1,
|
||||
.boot_on = 1,
|
||||
},
|
||||
.num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
|
||||
.consumer_supplies = sw1_consumers,
|
||||
};
|
||||
|
||||
static struct regulator_init_data sw2_init = {
|
||||
.constraints = {
|
||||
.name = "SW2",
|
||||
.always_on = 1,
|
||||
.boot_on = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct regulator_init_data sw3_init = {
|
||||
.constraints = {
|
||||
.name = "SW3",
|
||||
.always_on = 1,
|
||||
.boot_on = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct regulator_init_data sw4_init = {
|
||||
.constraints = {
|
||||
.name = "SW4",
|
||||
.always_on = 1,
|
||||
.boot_on = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct regulator_init_data viohi_init = {
|
||||
.constraints = {
|
||||
.name = "VIOHI",
|
||||
.boot_on = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct regulator_init_data vusb_init = {
|
||||
.constraints = {
|
||||
.name = "VUSB",
|
||||
.boot_on = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct regulator_init_data vdig_init = {
|
||||
.constraints = {
|
||||
.name = "VDIG",
|
||||
.boot_on = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct regulator_init_data vpll_init = {
|
||||
.constraints = {
|
||||
.name = "VPLL",
|
||||
.boot_on = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct regulator_init_data vusb2_init = {
|
||||
.constraints = {
|
||||
.name = "VUSB2",
|
||||
.boot_on = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct regulator_init_data vvideo_init = {
|
||||
.constraints = {
|
||||
.name = "VVIDEO",
|
||||
.boot_on = 1
|
||||
}
|
||||
};
|
||||
|
||||
static struct regulator_init_data vcam_init = {
|
||||
.constraints = {
|
||||
.name = "VCAM",
|
||||
.min_uV = 2500000,
|
||||
.max_uV = 3000000,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
|
||||
REGULATOR_CHANGE_MODE,
|
||||
.valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
|
||||
.boot_on = 1
|
||||
},
|
||||
.num_consumer_supplies = ARRAY_SIZE(vcam_consumers),
|
||||
.consumer_supplies = vcam_consumers,
|
||||
};
|
||||
|
||||
static struct regulator_init_data vgen1_init = {
|
||||
.constraints = {
|
||||
.name = "VGEN1",
|
||||
}
|
||||
};
|
||||
|
||||
static struct regulator_init_data vgen2_init = {
|
||||
.constraints = {
|
||||
.name = "VGEN2",
|
||||
.boot_on = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct regulator_init_data vgen3_init = {
|
||||
.constraints = {
|
||||
.name = "VGEN3",
|
||||
}
|
||||
};
|
||||
|
||||
static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = {
|
||||
{ .id = MC13892_SW1, .init_data = &sw1_init },
|
||||
{ .id = MC13892_SW2, .init_data = &sw2_init },
|
||||
{ .id = MC13892_SW3, .init_data = &sw3_init },
|
||||
{ .id = MC13892_SW4, .init_data = &sw4_init },
|
||||
{ .id = MC13892_VIOHI, .init_data = &viohi_init },
|
||||
{ .id = MC13892_VPLL, .init_data = &vpll_init },
|
||||
{ .id = MC13892_VDIG, .init_data = &vdig_init },
|
||||
{ .id = MC13892_VUSB2, .init_data = &vusb2_init },
|
||||
{ .id = MC13892_VVIDEO, .init_data = &vvideo_init },
|
||||
{ .id = MC13892_VCAM, .init_data = &vcam_init },
|
||||
{ .id = MC13892_VGEN1, .init_data = &vgen1_init },
|
||||
{ .id = MC13892_VGEN2, .init_data = &vgen2_init },
|
||||
{ .id = MC13892_VGEN3, .init_data = &vgen3_init },
|
||||
{ .id = MC13892_VUSB, .init_data = &vusb_init },
|
||||
};
|
||||
|
||||
static struct mc13xxx_platform_data mx35_3ds_mc13892_data = {
|
||||
.flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
|
||||
.regulators = {
|
||||
.num_regulators = ARRAY_SIZE(mx35_3ds_regulators),
|
||||
.regulators = mx35_3ds_regulators,
|
||||
},
|
||||
};
|
||||
|
||||
#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
|
||||
|
||||
static struct i2c_board_info mx35_3ds_i2c_mc13892 = {
|
||||
|
||||
I2C_BOARD_INFO("mc13892", 0x08),
|
||||
.platform_data = &mx35_3ds_mc13892_data,
|
||||
/* irq number is run-time assigned */
|
||||
};
|
||||
|
||||
static void __init imx35_3ds_init_mc13892(void)
|
||||
{
|
||||
int ret = gpio_request_one(GPIO_PMIC_INT, GPIOF_DIR_IN, "pmic irq");
|
||||
|
||||
if (ret) {
|
||||
pr_err("failed to get pmic irq: %d\n", ret);
|
||||
return;
|
||||
}
|
||||
|
||||
mx35_3ds_i2c_mc13892.irq = gpio_to_irq(GPIO_PMIC_INT);
|
||||
i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1);
|
||||
}
|
||||
|
||||
static int mx35_3ds_otg_init(struct platform_device *pdev)
|
||||
{
|
||||
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
|
||||
}
|
||||
|
||||
/* OTG config */
|
||||
static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
|
||||
.operating_mode = FSL_USB2_DR_DEVICE,
|
||||
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
|
||||
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
|
||||
/*
|
||||
* ENGCM09152 also requires a hardware change.
|
||||
* Please check the MX35 Chip Errata document for details.
|
||||
*/
|
||||
};
|
||||
|
||||
static struct mxc_usbh_platform_data otg_pdata __initdata = {
|
||||
.init = mx35_3ds_otg_init,
|
||||
.portsc = MXC_EHCI_MODE_UTMI,
|
||||
};
|
||||
|
||||
static int mx35_3ds_usbh_init(struct platform_device *pdev)
|
||||
{
|
||||
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
|
||||
MXC_EHCI_INTERNAL_PHY);
|
||||
}
|
||||
|
||||
/* USB HOST config */
|
||||
static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
|
||||
.init = mx35_3ds_usbh_init,
|
||||
.portsc = MXC_EHCI_MODE_SERIAL,
|
||||
};
|
||||
|
||||
static bool otg_mode_host __initdata;
|
||||
|
||||
static int __init mx35_3ds_otg_mode(char *options)
|
||||
{
|
||||
if (!strcmp(options, "host"))
|
||||
otg_mode_host = true;
|
||||
else if (!strcmp(options, "device"))
|
||||
otg_mode_host = false;
|
||||
else
|
||||
pr_info("otg_mode neither \"host\" nor \"device\". "
|
||||
"Defaulting to device\n");
|
||||
return 1;
|
||||
}
|
||||
__setup("otg_mode=", mx35_3ds_otg_mode);
|
||||
|
||||
static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
|
||||
.bitrate = 100000,
|
||||
};
|
||||
|
||||
/*
|
||||
* Board specific initialization.
|
||||
*/
|
||||
static void __init mx35_3ds_init(void)
|
||||
{
|
||||
imx35_soc_init();
|
||||
|
||||
mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
|
||||
|
||||
imx35_add_fec(NULL);
|
||||
imx35_add_imx2_wdt();
|
||||
imx35_add_mxc_rtc();
|
||||
platform_add_devices(devices, ARRAY_SIZE(devices));
|
||||
|
||||
imx35_add_imx_uart0(&uart_pdata);
|
||||
|
||||
if (otg_mode_host)
|
||||
imx35_add_mxc_ehci_otg(&otg_pdata);
|
||||
|
||||
imx35_add_mxc_ehci_hs(&usb_host_pdata);
|
||||
|
||||
if (!otg_mode_host)
|
||||
imx35_add_fsl_usb2_udc(&usb_otg_pdata);
|
||||
|
||||
imx35_add_mxc_nand(&mx35pdk_nand_board_info);
|
||||
imx35_add_sdhci_esdhc_imx(0, NULL);
|
||||
|
||||
imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
|
||||
|
||||
i2c_register_board_info(
|
||||
0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds));
|
||||
|
||||
imx35_add_ipu_core();
|
||||
}
|
||||
|
||||
static void __init mx35_3ds_late_init(void)
|
||||
{
|
||||
struct platform_device *imx35_fb_pdev;
|
||||
|
||||
if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
|
||||
pr_warn("Init of the debugboard failed, all "
|
||||
"devices on the debugboard are unusable.\n");
|
||||
|
||||
imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
|
||||
mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
|
||||
platform_device_register(&mx35_3ds_lcd);
|
||||
|
||||
imx35_3ds_init_mc13892();
|
||||
}
|
||||
|
||||
static void __init mx35pdk_timer_init(void)
|
||||
{
|
||||
mx35_clocks_init();
|
||||
}
|
||||
|
||||
MACHINE_START(MX35_3DS, "Freescale MX35PDK")
|
||||
/* Maintainer: Freescale Semiconductor, Inc */
|
||||
.atag_offset = 0x100,
|
||||
.map_io = mx35_map_io,
|
||||
.init_early = imx35_init_early,
|
||||
.init_irq = mx35_init_irq,
|
||||
.init_time = mx35pdk_timer_init,
|
||||
.init_machine = mx35_3ds_init,
|
||||
.init_late = mx35_3ds_late_init,
|
||||
.restart = mxc_restart,
|
||||
MACHINE_END
|
||||
|
|
@ -1,412 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* Copyright (C) 2009 Sascha Hauer, Pengutronix
|
||||
*/
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/mtd/plat-ram.h>
|
||||
#include <linux/memory.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio/machine.h>
|
||||
#include <linux/smc911x.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/property.h>
|
||||
#include <linux/usb/otg.h>
|
||||
#include <linux/usb/ulpi.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/time.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "devices-imx35.h"
|
||||
#include "ehci.h"
|
||||
#include "hardware.h"
|
||||
#include "iomux-mx35.h"
|
||||
#include "ulpi.h"
|
||||
|
||||
static const struct fb_videomode fb_modedb[] = {
|
||||
{
|
||||
/* 240x320 @ 60 Hz */
|
||||
.name = "Sharp-LQ035Q7",
|
||||
.refresh = 60,
|
||||
.xres = 240,
|
||||
.yres = 320,
|
||||
.pixclock = 185925,
|
||||
.left_margin = 9,
|
||||
.right_margin = 16,
|
||||
.upper_margin = 7,
|
||||
.lower_margin = 9,
|
||||
.hsync_len = 1,
|
||||
.vsync_len = 1,
|
||||
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
|
||||
.vmode = FB_VMODE_NONINTERLACED,
|
||||
.flag = 0,
|
||||
}, {
|
||||
/* 240x320 @ 60 Hz */
|
||||
.name = "TX090",
|
||||
.refresh = 60,
|
||||
.xres = 240,
|
||||
.yres = 320,
|
||||
.pixclock = 38255,
|
||||
.left_margin = 144,
|
||||
.right_margin = 0,
|
||||
.upper_margin = 7,
|
||||
.lower_margin = 40,
|
||||
.hsync_len = 96,
|
||||
.vsync_len = 1,
|
||||
.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
|
||||
.vmode = FB_VMODE_NONINTERLACED,
|
||||
.flag = 0,
|
||||
},
|
||||
};
|
||||
|
||||
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
|
||||
.name = "Sharp-LQ035Q7",
|
||||
.mode = fb_modedb,
|
||||
.num_modes = ARRAY_SIZE(fb_modedb),
|
||||
};
|
||||
|
||||
static struct physmap_flash_data pcm043_flash_data = {
|
||||
.width = 2,
|
||||
};
|
||||
|
||||
static struct resource pcm043_flash_resource = {
|
||||
.start = 0xa0000000,
|
||||
.end = 0xa1ffffff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct platform_device pcm043_flash = {
|
||||
.name = "physmap-flash",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &pcm043_flash_data,
|
||||
},
|
||||
.resource = &pcm043_flash_resource,
|
||||
.num_resources = 1,
|
||||
};
|
||||
|
||||
static const struct imxuart_platform_data uart_pdata __initconst = {
|
||||
.flags = IMXUART_HAVE_RTSCTS,
|
||||
};
|
||||
|
||||
static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
|
||||
.bitrate = 50000,
|
||||
};
|
||||
|
||||
static const struct property_entry board_eeprom_properties[] = {
|
||||
PROPERTY_ENTRY_U32("pagesize", 32),
|
||||
{ }
|
||||
};
|
||||
|
||||
static struct i2c_board_info pcm043_i2c_devices[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */
|
||||
.properties = board_eeprom_properties,
|
||||
}, {
|
||||
I2C_BOARD_INFO("pcf8563", 0x51),
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device *devices[] __initdata = {
|
||||
&pcm043_flash,
|
||||
};
|
||||
|
||||
static const iomux_v3_cfg_t pcm043_pads[] __initconst = {
|
||||
/* UART1 */
|
||||
MX35_PAD_CTS1__UART1_CTS,
|
||||
MX35_PAD_RTS1__UART1_RTS,
|
||||
MX35_PAD_TXD1__UART1_TXD_MUX,
|
||||
MX35_PAD_RXD1__UART1_RXD_MUX,
|
||||
/* UART2 */
|
||||
MX35_PAD_CTS2__UART2_CTS,
|
||||
MX35_PAD_RTS2__UART2_RTS,
|
||||
MX35_PAD_TXD2__UART2_TXD_MUX,
|
||||
MX35_PAD_RXD2__UART2_RXD_MUX,
|
||||
/* FEC */
|
||||
MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
|
||||
MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
|
||||
MX35_PAD_FEC_RX_DV__FEC_RX_DV,
|
||||
MX35_PAD_FEC_COL__FEC_COL,
|
||||
MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
|
||||
MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
|
||||
MX35_PAD_FEC_TX_EN__FEC_TX_EN,
|
||||
MX35_PAD_FEC_MDC__FEC_MDC,
|
||||
MX35_PAD_FEC_MDIO__FEC_MDIO,
|
||||
MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
|
||||
MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
|
||||
MX35_PAD_FEC_CRS__FEC_CRS,
|
||||
MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
|
||||
MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
|
||||
MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
|
||||
MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
|
||||
MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
|
||||
MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
|
||||
/* I2C1 */
|
||||
MX35_PAD_I2C1_CLK__I2C1_SCL,
|
||||
MX35_PAD_I2C1_DAT__I2C1_SDA,
|
||||
/* Display */
|
||||
MX35_PAD_LD0__IPU_DISPB_DAT_0,
|
||||
MX35_PAD_LD1__IPU_DISPB_DAT_1,
|
||||
MX35_PAD_LD2__IPU_DISPB_DAT_2,
|
||||
MX35_PAD_LD3__IPU_DISPB_DAT_3,
|
||||
MX35_PAD_LD4__IPU_DISPB_DAT_4,
|
||||
MX35_PAD_LD5__IPU_DISPB_DAT_5,
|
||||
MX35_PAD_LD6__IPU_DISPB_DAT_6,
|
||||
MX35_PAD_LD7__IPU_DISPB_DAT_7,
|
||||
MX35_PAD_LD8__IPU_DISPB_DAT_8,
|
||||
MX35_PAD_LD9__IPU_DISPB_DAT_9,
|
||||
MX35_PAD_LD10__IPU_DISPB_DAT_10,
|
||||
MX35_PAD_LD11__IPU_DISPB_DAT_11,
|
||||
MX35_PAD_LD12__IPU_DISPB_DAT_12,
|
||||
MX35_PAD_LD13__IPU_DISPB_DAT_13,
|
||||
MX35_PAD_LD14__IPU_DISPB_DAT_14,
|
||||
MX35_PAD_LD15__IPU_DISPB_DAT_15,
|
||||
MX35_PAD_LD16__IPU_DISPB_DAT_16,
|
||||
MX35_PAD_LD17__IPU_DISPB_DAT_17,
|
||||
MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
|
||||
MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
|
||||
MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
|
||||
MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
|
||||
MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
|
||||
MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
|
||||
MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
|
||||
/* gpio */
|
||||
MX35_PAD_ATA_CS0__GPIO2_6,
|
||||
/* USB host */
|
||||
MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
|
||||
MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
|
||||
/* SSI */
|
||||
MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
|
||||
MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
|
||||
MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
|
||||
MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
|
||||
/* CAN2 */
|
||||
MX35_PAD_TX5_RX0__CAN2_TXCAN,
|
||||
MX35_PAD_TX4_RX1__CAN2_RXCAN,
|
||||
/* esdhc */
|
||||
MX35_PAD_SD1_CMD__ESDHC1_CMD,
|
||||
MX35_PAD_SD1_CLK__ESDHC1_CLK,
|
||||
MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
|
||||
MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
|
||||
MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
|
||||
MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
|
||||
MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */
|
||||
MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */
|
||||
};
|
||||
|
||||
#define AC97_GPIO_TXFS IMX_GPIO_NR(2, 31)
|
||||
#define AC97_GPIO_TXD IMX_GPIO_NR(2, 28)
|
||||
#define AC97_GPIO_RESET IMX_GPIO_NR(2, 0)
|
||||
|
||||
static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
|
||||
{
|
||||
iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
|
||||
iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
|
||||
int ret;
|
||||
|
||||
ret = gpio_request(AC97_GPIO_TXFS, "SSI");
|
||||
if (ret) {
|
||||
printk("failed to get GPIO_TXFS: %d\n", ret);
|
||||
return;
|
||||
}
|
||||
|
||||
mxc_iomux_v3_setup_pad(txfs_gpio);
|
||||
|
||||
/* warm reset */
|
||||
gpio_direction_output(AC97_GPIO_TXFS, 1);
|
||||
udelay(2);
|
||||
gpio_set_value(AC97_GPIO_TXFS, 0);
|
||||
|
||||
gpio_free(AC97_GPIO_TXFS);
|
||||
mxc_iomux_v3_setup_pad(txfs);
|
||||
}
|
||||
|
||||
static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
|
||||
{
|
||||
iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
|
||||
iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
|
||||
iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28;
|
||||
iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
|
||||
iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
|
||||
int ret;
|
||||
|
||||
ret = gpio_request(AC97_GPIO_TXFS, "SSI");
|
||||
if (ret)
|
||||
goto err1;
|
||||
|
||||
ret = gpio_request(AC97_GPIO_TXD, "SSI");
|
||||
if (ret)
|
||||
goto err2;
|
||||
|
||||
ret = gpio_request(AC97_GPIO_RESET, "SSI");
|
||||
if (ret)
|
||||
goto err3;
|
||||
|
||||
mxc_iomux_v3_setup_pad(txfs_gpio);
|
||||
mxc_iomux_v3_setup_pad(txd_gpio);
|
||||
mxc_iomux_v3_setup_pad(reset_gpio);
|
||||
|
||||
gpio_direction_output(AC97_GPIO_TXFS, 0);
|
||||
gpio_direction_output(AC97_GPIO_TXD, 0);
|
||||
|
||||
/* cold reset */
|
||||
gpio_direction_output(AC97_GPIO_RESET, 0);
|
||||
udelay(10);
|
||||
gpio_direction_output(AC97_GPIO_RESET, 1);
|
||||
|
||||
mxc_iomux_v3_setup_pad(txd);
|
||||
mxc_iomux_v3_setup_pad(txfs);
|
||||
|
||||
gpio_free(AC97_GPIO_RESET);
|
||||
err3:
|
||||
gpio_free(AC97_GPIO_TXD);
|
||||
err2:
|
||||
gpio_free(AC97_GPIO_TXFS);
|
||||
err1:
|
||||
if (ret)
|
||||
printk("%s failed with %d\n", __func__, ret);
|
||||
mdelay(1);
|
||||
}
|
||||
|
||||
static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = {
|
||||
.ac97_reset = pcm043_ac97_cold_reset,
|
||||
.ac97_warm_reset = pcm043_ac97_warm_reset,
|
||||
.flags = IMX_SSI_USE_AC97,
|
||||
};
|
||||
|
||||
static const struct mxc_nand_platform_data
|
||||
pcm037_nand_board_info __initconst = {
|
||||
.width = 1,
|
||||
.hw_ecc = 1,
|
||||
};
|
||||
|
||||
static int pcm043_otg_init(struct platform_device *pdev)
|
||||
{
|
||||
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
|
||||
}
|
||||
|
||||
static struct mxc_usbh_platform_data otg_pdata __initdata = {
|
||||
.init = pcm043_otg_init,
|
||||
.portsc = MXC_EHCI_MODE_UTMI,
|
||||
};
|
||||
|
||||
static int pcm043_usbh1_init(struct platform_device *pdev)
|
||||
{
|
||||
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
|
||||
MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
|
||||
}
|
||||
|
||||
static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
|
||||
.init = pcm043_usbh1_init,
|
||||
.portsc = MXC_EHCI_MODE_SERIAL,
|
||||
};
|
||||
|
||||
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
|
||||
.operating_mode = FSL_USB2_DR_DEVICE,
|
||||
.phy_mode = FSL_USB2_PHY_UTMI,
|
||||
};
|
||||
|
||||
static bool otg_mode_host __initdata;
|
||||
|
||||
static int __init pcm043_otg_mode(char *options)
|
||||
{
|
||||
if (!strcmp(options, "host"))
|
||||
otg_mode_host = true;
|
||||
else if (!strcmp(options, "device"))
|
||||
otg_mode_host = false;
|
||||
else
|
||||
pr_info("otg_mode neither \"host\" nor \"device\". "
|
||||
"Defaulting to device\n");
|
||||
return 1;
|
||||
}
|
||||
__setup("otg_mode=", pcm043_otg_mode);
|
||||
|
||||
static struct esdhc_platform_data sd1_pdata = {
|
||||
.wp_type = ESDHC_WP_GPIO,
|
||||
.cd_type = ESDHC_CD_GPIO,
|
||||
};
|
||||
|
||||
static struct gpiod_lookup_table sd1_gpio_table = {
|
||||
.dev_id = "sdhci-esdhc-imx35.0",
|
||||
.table = {
|
||||
/* Card detect: bank 2 offset 24 */
|
||||
GPIO_LOOKUP("imx35-gpio.2", 24, "cd", GPIO_ACTIVE_LOW),
|
||||
/* Write protect: bank 2 offset 23 */
|
||||
GPIO_LOOKUP("imx35-gpio.2", 23, "wp", GPIO_ACTIVE_LOW),
|
||||
{ },
|
||||
},
|
||||
};
|
||||
|
||||
/*
|
||||
* Board specific initialization.
|
||||
*/
|
||||
static void __init pcm043_init(void)
|
||||
{
|
||||
imx35_soc_init();
|
||||
|
||||
mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
|
||||
|
||||
imx35_add_fec(NULL);
|
||||
platform_add_devices(devices, ARRAY_SIZE(devices));
|
||||
imx35_add_imx2_wdt();
|
||||
|
||||
imx35_add_imx_uart0(&uart_pdata);
|
||||
imx35_add_mxc_nand(&pcm037_nand_board_info);
|
||||
|
||||
imx35_add_imx_uart1(&uart_pdata);
|
||||
|
||||
i2c_register_board_info(0, pcm043_i2c_devices,
|
||||
ARRAY_SIZE(pcm043_i2c_devices));
|
||||
|
||||
imx35_add_imx_i2c0(&pcm043_i2c0_data);
|
||||
|
||||
imx35_add_ipu_core();
|
||||
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
|
||||
|
||||
if (otg_mode_host) {
|
||||
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
|
||||
ULPI_OTG_DRVVBUS_EXT);
|
||||
if (otg_pdata.otg)
|
||||
imx35_add_mxc_ehci_otg(&otg_pdata);
|
||||
}
|
||||
imx35_add_mxc_ehci_hs(&usbh1_pdata);
|
||||
|
||||
if (!otg_mode_host)
|
||||
imx35_add_fsl_usb2_udc(&otg_device_pdata);
|
||||
|
||||
imx35_add_flexcan1();
|
||||
}
|
||||
|
||||
static void __init pcm043_late_init(void)
|
||||
{
|
||||
imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
|
||||
|
||||
gpiod_add_lookup_table(&sd1_gpio_table);
|
||||
imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
|
||||
}
|
||||
|
||||
static void __init pcm043_timer_init(void)
|
||||
{
|
||||
mx35_clocks_init();
|
||||
}
|
||||
|
||||
MACHINE_START(PCM043, "Phytec Phycore pcm043")
|
||||
/* Maintainer: Pengutronix */
|
||||
.atag_offset = 0x100,
|
||||
.map_io = mx35_map_io,
|
||||
.init_early = imx35_init_early,
|
||||
.init_irq = mx35_init_irq,
|
||||
.init_time = pcm043_timer_init,
|
||||
.init_machine = pcm043_init,
|
||||
.init_late = pcm043_late_init,
|
||||
.restart = mxc_restart,
|
||||
MACHINE_END
|
||||
|
|
@ -1,306 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
|
||||
* Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
|
||||
* Copyright 2010 Creative Product Design
|
||||
*
|
||||
* Derived from mx35 3stack.
|
||||
* Original author: Fabio Estevam <fabio.estevam@freescale.com>
|
||||
*/
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/memory.h>
|
||||
#include <linux/gpio.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/time.h>
|
||||
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/mfd/mc13xxx.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "devices-imx35.h"
|
||||
#include "ehci.h"
|
||||
#include "hardware.h"
|
||||
#include "iomux-mx35.h"
|
||||
|
||||
#define GPIO_LCDPWR IMX_GPIO_NR(1, 2)
|
||||
#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
|
||||
|
||||
#define GPIO_BUTTON1 IMX_GPIO_NR(1, 4)
|
||||
#define GPIO_BUTTON2 IMX_GPIO_NR(1, 5)
|
||||
#define GPIO_BUTTON3 IMX_GPIO_NR(1, 7)
|
||||
#define GPIO_BUTTON4 IMX_GPIO_NR(1, 8)
|
||||
#define GPIO_BUTTON5 IMX_GPIO_NR(1, 9)
|
||||
#define GPIO_BUTTON6 IMX_GPIO_NR(1, 10)
|
||||
#define GPIO_BUTTON7 IMX_GPIO_NR(1, 11)
|
||||
#define GPIO_BUTTON8 IMX_GPIO_NR(1, 12)
|
||||
|
||||
static const struct fb_videomode fb_modedb[] = {
|
||||
{
|
||||
/* 800x480 @ 60 Hz */
|
||||
.name = "PT0708048",
|
||||
.refresh = 60,
|
||||
.xres = 800,
|
||||
.yres = 480,
|
||||
.pixclock = KHZ2PICOS(33260),
|
||||
.left_margin = 50,
|
||||
.right_margin = 156,
|
||||
.upper_margin = 10,
|
||||
.lower_margin = 10,
|
||||
.hsync_len = 1, /* note: DE only display */
|
||||
.vsync_len = 1, /* note: DE only display */
|
||||
.sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
|
||||
.vmode = FB_VMODE_NONINTERLACED,
|
||||
.flag = 0,
|
||||
}, {
|
||||
/* 800x480 @ 60 Hz */
|
||||
.name = "CTP-CLAA070LC0ACW",
|
||||
.refresh = 60,
|
||||
.xres = 800,
|
||||
.yres = 480,
|
||||
.pixclock = KHZ2PICOS(27000),
|
||||
.left_margin = 50,
|
||||
.right_margin = 50, /* whole line should have 900 clocks */
|
||||
.upper_margin = 10,
|
||||
.lower_margin = 10, /* whole frame should have 500 lines */
|
||||
.hsync_len = 1, /* note: DE only display */
|
||||
.vsync_len = 1, /* note: DE only display */
|
||||
.sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
|
||||
.vmode = FB_VMODE_NONINTERLACED,
|
||||
.flag = 0,
|
||||
}
|
||||
};
|
||||
|
||||
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
|
||||
.name = "PT0708048",
|
||||
.mode = fb_modedb,
|
||||
.num_modes = ARRAY_SIZE(fb_modedb),
|
||||
};
|
||||
|
||||
static struct physmap_flash_data vpr200_flash_data = {
|
||||
.width = 2,
|
||||
};
|
||||
|
||||
static struct resource vpr200_flash_resource = {
|
||||
.start = MX35_CS0_BASE_ADDR,
|
||||
.end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct platform_device vpr200_flash = {
|
||||
.name = "physmap-flash",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &vpr200_flash_data,
|
||||
},
|
||||
.resource = &vpr200_flash_resource,
|
||||
.num_resources = 1,
|
||||
};
|
||||
|
||||
static const struct mxc_nand_platform_data
|
||||
vpr200_nand_board_info __initconst = {
|
||||
.width = 1,
|
||||
.hw_ecc = 1,
|
||||
.flash_bbt = 1,
|
||||
};
|
||||
|
||||
#define VPR_KEY_DEBOUNCE 500
|
||||
static struct gpio_keys_button vpr200_gpio_keys_table[] = {
|
||||
{KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
|
||||
{KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
|
||||
{KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
|
||||
{KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
|
||||
{KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
|
||||
{KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
|
||||
{KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
|
||||
{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
|
||||
};
|
||||
|
||||
static const struct gpio_keys_platform_data
|
||||
vpr200_gpio_keys_data __initconst = {
|
||||
.buttons = vpr200_gpio_keys_table,
|
||||
.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
|
||||
};
|
||||
|
||||
static struct mc13xxx_platform_data vpr200_pmic = {
|
||||
.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
|
||||
};
|
||||
|
||||
static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
|
||||
.bitrate = 50000,
|
||||
};
|
||||
|
||||
static struct i2c_board_info vpr200_i2c_devices[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("24c02", 0x50), /* E0=0, E1=0, E2=0 */
|
||||
}, {
|
||||
I2C_BOARD_INFO("mc13892", 0x08),
|
||||
.platform_data = &vpr200_pmic,
|
||||
/* irq number is run-time assigned */
|
||||
}
|
||||
};
|
||||
|
||||
static const iomux_v3_cfg_t vpr200_pads[] __initconst = {
|
||||
/* UART1 */
|
||||
MX35_PAD_TXD1__UART1_TXD_MUX,
|
||||
MX35_PAD_RXD1__UART1_RXD_MUX,
|
||||
/* UART3 */
|
||||
MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
|
||||
MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
|
||||
/* FEC */
|
||||
MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
|
||||
MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
|
||||
MX35_PAD_FEC_RX_DV__FEC_RX_DV,
|
||||
MX35_PAD_FEC_COL__FEC_COL,
|
||||
MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
|
||||
MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
|
||||
MX35_PAD_FEC_TX_EN__FEC_TX_EN,
|
||||
MX35_PAD_FEC_MDC__FEC_MDC,
|
||||
MX35_PAD_FEC_MDIO__FEC_MDIO,
|
||||
MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
|
||||
MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
|
||||
MX35_PAD_FEC_CRS__FEC_CRS,
|
||||
MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
|
||||
MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
|
||||
MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
|
||||
MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
|
||||
MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
|
||||
MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
|
||||
/* Display */
|
||||
MX35_PAD_LD0__IPU_DISPB_DAT_0,
|
||||
MX35_PAD_LD1__IPU_DISPB_DAT_1,
|
||||
MX35_PAD_LD2__IPU_DISPB_DAT_2,
|
||||
MX35_PAD_LD3__IPU_DISPB_DAT_3,
|
||||
MX35_PAD_LD4__IPU_DISPB_DAT_4,
|
||||
MX35_PAD_LD5__IPU_DISPB_DAT_5,
|
||||
MX35_PAD_LD6__IPU_DISPB_DAT_6,
|
||||
MX35_PAD_LD7__IPU_DISPB_DAT_7,
|
||||
MX35_PAD_LD8__IPU_DISPB_DAT_8,
|
||||
MX35_PAD_LD9__IPU_DISPB_DAT_9,
|
||||
MX35_PAD_LD10__IPU_DISPB_DAT_10,
|
||||
MX35_PAD_LD11__IPU_DISPB_DAT_11,
|
||||
MX35_PAD_LD12__IPU_DISPB_DAT_12,
|
||||
MX35_PAD_LD13__IPU_DISPB_DAT_13,
|
||||
MX35_PAD_LD14__IPU_DISPB_DAT_14,
|
||||
MX35_PAD_LD15__IPU_DISPB_DAT_15,
|
||||
MX35_PAD_LD16__IPU_DISPB_DAT_16,
|
||||
MX35_PAD_LD17__IPU_DISPB_DAT_17,
|
||||
MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
|
||||
MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
|
||||
MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
|
||||
/* LCD Enable */
|
||||
MX35_PAD_D3_VSYNC__GPIO1_2,
|
||||
/* USBOTG */
|
||||
MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
|
||||
MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
|
||||
/* SDCARD */
|
||||
MX35_PAD_SD1_CMD__ESDHC1_CMD,
|
||||
MX35_PAD_SD1_CLK__ESDHC1_CLK,
|
||||
MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
|
||||
MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
|
||||
MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
|
||||
MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
|
||||
/* PMIC */
|
||||
MX35_PAD_GPIO2_0__GPIO2_0,
|
||||
/* GPIO keys */
|
||||
MX35_PAD_SCKR__GPIO1_4,
|
||||
MX35_PAD_COMPARE__GPIO1_5,
|
||||
MX35_PAD_SCKT__GPIO1_7,
|
||||
MX35_PAD_FST__GPIO1_8,
|
||||
MX35_PAD_HCKT__GPIO1_9,
|
||||
MX35_PAD_TX5_RX0__GPIO1_10,
|
||||
MX35_PAD_TX4_RX1__GPIO1_11,
|
||||
MX35_PAD_TX3_RX2__GPIO1_12,
|
||||
};
|
||||
|
||||
/* USB Device config */
|
||||
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
|
||||
.operating_mode = FSL_USB2_DR_DEVICE,
|
||||
.phy_mode = FSL_USB2_PHY_UTMI,
|
||||
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
|
||||
};
|
||||
|
||||
static int vpr200_usbh_init(struct platform_device *pdev)
|
||||
{
|
||||
return mx35_initialize_usb_hw(pdev->id,
|
||||
MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
|
||||
}
|
||||
|
||||
/* USB HOST config */
|
||||
static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
|
||||
.init = vpr200_usbh_init,
|
||||
.portsc = MXC_EHCI_MODE_SERIAL,
|
||||
};
|
||||
|
||||
static struct platform_device *devices[] __initdata = {
|
||||
&vpr200_flash,
|
||||
};
|
||||
|
||||
/*
|
||||
* Board specific initialization.
|
||||
*/
|
||||
static void __init vpr200_board_init(void)
|
||||
{
|
||||
imx35_soc_init();
|
||||
|
||||
mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
|
||||
|
||||
imx35_add_fec(NULL);
|
||||
imx35_add_imx2_wdt();
|
||||
|
||||
imx35_add_imx_uart0(NULL);
|
||||
imx35_add_imx_uart2(NULL);
|
||||
|
||||
imx35_add_ipu_core();
|
||||
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
|
||||
|
||||
imx35_add_fsl_usb2_udc(&otg_device_pdata);
|
||||
imx35_add_mxc_ehci_hs(&usb_host_pdata);
|
||||
|
||||
imx35_add_mxc_nand(&vpr200_nand_board_info);
|
||||
imx35_add_sdhci_esdhc_imx(0, NULL);
|
||||
}
|
||||
|
||||
static void __init vpr200_late_init(void)
|
||||
{
|
||||
imx_add_gpio_keys(&vpr200_gpio_keys_data);
|
||||
|
||||
platform_add_devices(devices, ARRAY_SIZE(devices));
|
||||
|
||||
if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
|
||||
printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
|
||||
else
|
||||
gpio_direction_output(GPIO_LCDPWR, 0);
|
||||
|
||||
if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
|
||||
printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
|
||||
else
|
||||
gpio_direction_input(GPIO_PMIC_INT);
|
||||
|
||||
vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
|
||||
i2c_register_board_info(0, vpr200_i2c_devices,
|
||||
ARRAY_SIZE(vpr200_i2c_devices));
|
||||
|
||||
imx35_add_imx_i2c0(&vpr200_i2c0_data);
|
||||
}
|
||||
|
||||
static void __init vpr200_timer_init(void)
|
||||
{
|
||||
mx35_clocks_init();
|
||||
}
|
||||
|
||||
MACHINE_START(VPR200, "VPR200")
|
||||
/* Maintainer: Creative Product Design */
|
||||
.map_io = mx35_map_io,
|
||||
.init_early = imx35_init_early,
|
||||
.init_irq = mx35_init_irq,
|
||||
.init_time = vpr200_timer_init,
|
||||
.init_machine = vpr200_board_init,
|
||||
.init_late = vpr200_late_init,
|
||||
.restart = mxc_restart,
|
||||
MACHINE_END
|
||||
Loading…
Reference in New Issue