mirror of https://gitee.com/openkylin/linux.git
[PATCH] ppc32 CPM_UART: Convert to use platform devices
This is intended to make the driver code more generic and flexible, to get rid of board-specific layouts within driver, and generic rehaul, yet keeping compatibility with the existing stuff utilizing it, being compatible with legacy behavior (but with complaints that legacy mode used). Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
This commit is contained in:
Vitaly Bordug
Paul Mackerras
parent
a73c87bfe9
commit
e27987cddd
|
|
@ -10,6 +10,8 @@
|
|||
#define CPM_UART_H
|
||||
|
||||
#include <linux/config.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/fs_uart_pd.h>
|
||||
|
||||
#if defined(CONFIG_CPM2)
|
||||
#include "cpm_uart_cpm2.h"
|
||||
|
|
@ -26,14 +28,14 @@
|
|||
#define FLAG_SMC 0x00000002
|
||||
#define FLAG_CONSOLE 0x00000001
|
||||
|
||||
#define UART_SMC1 0
|
||||
#define UART_SMC2 1
|
||||
#define UART_SCC1 2
|
||||
#define UART_SCC2 3
|
||||
#define UART_SCC3 4
|
||||
#define UART_SCC4 5
|
||||
#define UART_SMC1 fsid_smc1_uart
|
||||
#define UART_SMC2 fsid_smc2_uart
|
||||
#define UART_SCC1 fsid_scc1_uart
|
||||
#define UART_SCC2 fsid_scc2_uart
|
||||
#define UART_SCC3 fsid_scc3_uart
|
||||
#define UART_SCC4 fsid_scc4_uart
|
||||
|
||||
#define UART_NR 6
|
||||
#define UART_NR fs_uart_nr
|
||||
|
||||
#define RX_NUM_FIFO 4
|
||||
#define RX_BUF_SIZE 32
|
||||
|
|
|
|||
|
|
@ -41,6 +41,7 @@
|
|||
#include <linux/device.h>
|
||||
#include <linux/bootmem.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/fs_uart_pd.h>
|
||||
|
||||
#include <asm/io.h>
|
||||
#include <asm/irq.h>
|
||||
|
|
@ -60,7 +61,7 @@
|
|||
/* Track which ports are configured as uarts */
|
||||
int cpm_uart_port_map[UART_NR];
|
||||
/* How many ports did we config as uarts */
|
||||
int cpm_uart_nr;
|
||||
int cpm_uart_nr = 0;
|
||||
|
||||
/**************************************************************/
|
||||
|
||||
|
|
@ -85,6 +86,37 @@ static inline void *cpm2cpu_addr(unsigned long addr)
|
|||
return bus_to_virt(addr);
|
||||
}
|
||||
|
||||
/* Place-holder for board-specific stuff */
|
||||
struct platform_device* __attribute__ ((weak)) __init
|
||||
early_uart_get_pdev(int index)
|
||||
{
|
||||
return NULL;
|
||||
}
|
||||
|
||||
|
||||
void cpm_uart_count(void)
|
||||
{
|
||||
cpm_uart_nr = 0;
|
||||
#ifdef CONFIG_SERIAL_CPM_SMC1
|
||||
cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
|
||||
#endif
|
||||
#ifdef CONFIG_SERIAL_CPM_SMC2
|
||||
cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
|
||||
#endif
|
||||
#ifdef CONFIG_SERIAL_CPM_SCC1
|
||||
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
|
||||
#endif
|
||||
#ifdef CONFIG_SERIAL_CPM_SCC2
|
||||
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
|
||||
#endif
|
||||
#ifdef CONFIG_SERIAL_CPM_SCC3
|
||||
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
|
||||
#endif
|
||||
#ifdef CONFIG_SERIAL_CPM_SCC4
|
||||
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*
|
||||
* Check, if transmit buffers are processed
|
||||
*/
|
||||
|
|
@ -829,14 +861,6 @@ static int cpm_uart_request_port(struct uart_port *port)
|
|||
if (pinfo->flags & FLAG_CONSOLE)
|
||||
return 0;
|
||||
|
||||
/*
|
||||
* Setup any port IO, connect any baud rate generators,
|
||||
* etc. This is expected to be handled by board
|
||||
* dependant code
|
||||
*/
|
||||
if (pinfo->set_lineif)
|
||||
pinfo->set_lineif(pinfo);
|
||||
|
||||
if (IS_SMC(pinfo)) {
|
||||
pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
|
||||
pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
|
||||
|
|
@ -988,6 +1012,54 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
|
|||
},
|
||||
};
|
||||
|
||||
int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
|
||||
{
|
||||
struct resource *r;
|
||||
struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
|
||||
int idx = pdata->fs_no; /* It is UART_SMCx or UART_SCCx index */
|
||||
struct uart_cpm_port *pinfo;
|
||||
int line;
|
||||
u32 mem, pram;
|
||||
|
||||
for (line=0; line<UART_NR && cpm_uart_port_map[line]!=pdata->fs_no; line++);
|
||||
|
||||
pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx];
|
||||
|
||||
pinfo->brg = pdata->brg;
|
||||
|
||||
if (!is_con) {
|
||||
pinfo->port.line = line;
|
||||
pinfo->port.flags = UPF_BOOT_AUTOCONF;
|
||||
}
|
||||
|
||||
if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs")))
|
||||
return -EINVAL;
|
||||
mem = r->start;
|
||||
|
||||
if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram")))
|
||||
return -EINVAL;
|
||||
pram = r->start;
|
||||
|
||||
if(idx > fsid_smc2_uart) {
|
||||
pinfo->sccp = (scc_t *)mem;
|
||||
pinfo->sccup = (scc_uart_t *)pram;
|
||||
} else {
|
||||
pinfo->smcp = (smc_t *)mem;
|
||||
pinfo->smcup = (smc_uart_t *)pram;
|
||||
}
|
||||
pinfo->tx_nrfifos = pdata->tx_num_fifo;
|
||||
pinfo->tx_fifosize = pdata->tx_buf_size;
|
||||
|
||||
pinfo->rx_nrfifos = pdata->rx_num_fifo;
|
||||
pinfo->rx_fifosize = pdata->rx_buf_size;
|
||||
|
||||
pinfo->port.uartclk = pdata->uart_clk;
|
||||
pinfo->port.mapbase = (unsigned long)mem;
|
||||
pinfo->port.irq = platform_get_irq(pdev, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SERIAL_CPM_CONSOLE
|
||||
/*
|
||||
* Print a string to the serial port trying not to disturb
|
||||
|
|
@ -1067,9 +1139,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
|
|||
pinfo->tx_cur = (volatile cbd_t *) bdp;
|
||||
}
|
||||
|
||||
/*
|
||||
* Setup console. Be careful is called early !
|
||||
*/
|
||||
|
||||
static int __init cpm_uart_console_setup(struct console *co, char *options)
|
||||
{
|
||||
struct uart_port *port;
|
||||
|
|
@ -1080,9 +1150,27 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
|
|||
int flow = 'n';
|
||||
int ret;
|
||||
|
||||
struct fs_uart_platform_info *pdata;
|
||||
struct platform_device* pdev = early_uart_get_pdev(co->index);
|
||||
|
||||
port =
|
||||
(struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
|
||||
pinfo = (struct uart_cpm_port *)port;
|
||||
if (!pdev) {
|
||||
pr_info("cpm_uart: console: compat mode\n");
|
||||
/* compatibility - will be cleaned up */
|
||||
cpm_uart_init_portdesc();
|
||||
|
||||
if (pinfo->set_lineif)
|
||||
pinfo->set_lineif(pinfo);
|
||||
} else {
|
||||
pdata = pdev->dev.platform_data;
|
||||
if (pdata)
|
||||
if (pdata->init_ioports)
|
||||
pdata->init_ioports();
|
||||
|
||||
cpm_uart_drv_get_platform_data(pdev, 1);
|
||||
}
|
||||
|
||||
pinfo->flags |= FLAG_CONSOLE;
|
||||
|
||||
|
|
@ -1097,14 +1185,6 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
|
|||
baud = 9600;
|
||||
}
|
||||
|
||||
/*
|
||||
* Setup any port IO, connect any baud rate generators,
|
||||
* etc. This is expected to be handled by board
|
||||
* dependant code
|
||||
*/
|
||||
if (pinfo->set_lineif)
|
||||
pinfo->set_lineif(pinfo);
|
||||
|
||||
if (IS_SMC(pinfo)) {
|
||||
pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
|
||||
pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
|
||||
|
|
@ -1143,11 +1223,8 @@ static struct console cpm_scc_uart_console = {
|
|||
|
||||
int __init cpm_uart_console_init(void)
|
||||
{
|
||||
int ret = cpm_uart_init_portdesc();
|
||||
|
||||
if (!ret)
|
||||
register_console(&cpm_scc_uart_console);
|
||||
return ret;
|
||||
register_console(&cpm_scc_uart_console);
|
||||
return 0;
|
||||
}
|
||||
|
||||
console_initcall(cpm_uart_console_init);
|
||||
|
|
@ -1165,44 +1242,130 @@ static struct uart_driver cpm_reg = {
|
|||
.minor = SERIAL_CPM_MINOR,
|
||||
.cons = CPM_UART_CONSOLE,
|
||||
};
|
||||
|
||||
static int __init cpm_uart_init(void)
|
||||
static int cpm_uart_drv_probe(struct device *dev)
|
||||
{
|
||||
int ret, i;
|
||||
struct platform_device *pdev = to_platform_device(dev);
|
||||
struct fs_uart_platform_info *pdata;
|
||||
int ret = -ENODEV;
|
||||
|
||||
printk(KERN_INFO "Serial: CPM driver $Revision: 0.01 $\n");
|
||||
|
||||
#ifndef CONFIG_SERIAL_CPM_CONSOLE
|
||||
ret = cpm_uart_init_portdesc();
|
||||
if (ret)
|
||||
if(!pdev) {
|
||||
printk(KERN_ERR"CPM UART: platform data missing!\n");
|
||||
return ret;
|
||||
#endif
|
||||
|
||||
cpm_reg.nr = cpm_uart_nr;
|
||||
ret = uart_register_driver(&cpm_reg);
|
||||
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
for (i = 0; i < cpm_uart_nr; i++) {
|
||||
int con = cpm_uart_port_map[i];
|
||||
cpm_uart_ports[con].port.line = i;
|
||||
cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
|
||||
uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
|
||||
}
|
||||
|
||||
pdata = pdev->dev.platform_data;
|
||||
pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n",
|
||||
cpm_uart_port_map[pdata->fs_no]);
|
||||
|
||||
if ((ret = cpm_uart_drv_get_platform_data(pdev, 0)))
|
||||
return ret;
|
||||
|
||||
if (pdata->init_ioports)
|
||||
pdata->init_ioports();
|
||||
|
||||
ret = uart_add_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int cpm_uart_drv_remove(struct device *dev)
|
||||
{
|
||||
struct platform_device *pdev = to_platform_device(dev);
|
||||
struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
|
||||
|
||||
pr_debug("cpm_uart_drv_remove: Removing CPM UART %d\n",
|
||||
cpm_uart_port_map[pdata->fs_no]);
|
||||
|
||||
uart_remove_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct device_driver cpm_smc_uart_driver = {
|
||||
.name = "fsl-cpm-smc:uart",
|
||||
.bus = &platform_bus_type,
|
||||
.probe = cpm_uart_drv_probe,
|
||||
.remove = cpm_uart_drv_remove,
|
||||
};
|
||||
|
||||
static struct device_driver cpm_scc_uart_driver = {
|
||||
.name = "fsl-cpm-scc:uart",
|
||||
.bus = &platform_bus_type,
|
||||
.probe = cpm_uart_drv_probe,
|
||||
.remove = cpm_uart_drv_remove,
|
||||
};
|
||||
|
||||
/*
|
||||
This is supposed to match uart devices on platform bus,
|
||||
*/
|
||||
static int match_is_uart (struct device* dev, void* data)
|
||||
{
|
||||
struct platform_device* pdev = container_of(dev, struct platform_device, dev);
|
||||
int ret = 0;
|
||||
/* this was setfunc as uart */
|
||||
if(strstr(pdev->name,":uart")) {
|
||||
ret = 1;
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
||||
static int cpm_uart_init(void) {
|
||||
|
||||
int ret;
|
||||
int i;
|
||||
struct device *dev;
|
||||
printk(KERN_INFO "Serial: CPM driver $Revision: 0.02 $\n");
|
||||
|
||||
/* lookup the bus for uart devices */
|
||||
dev = bus_find_device(&platform_bus_type, NULL, 0, match_is_uart);
|
||||
|
||||
/* There are devices on the bus - all should be OK */
|
||||
if (dev) {
|
||||
cpm_uart_count();
|
||||
cpm_reg.nr = cpm_uart_nr;
|
||||
|
||||
if (!(ret = uart_register_driver(&cpm_reg))) {
|
||||
if ((ret = driver_register(&cpm_smc_uart_driver))) {
|
||||
uart_unregister_driver(&cpm_reg);
|
||||
return ret;
|
||||
}
|
||||
if ((ret = driver_register(&cpm_scc_uart_driver))) {
|
||||
driver_unregister(&cpm_scc_uart_driver);
|
||||
uart_unregister_driver(&cpm_reg);
|
||||
}
|
||||
}
|
||||
} else {
|
||||
/* No capable platform devices found - falling back to legacy mode */
|
||||
pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n");
|
||||
pr_info(
|
||||
"cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n");
|
||||
#ifndef CONFIG_SERIAL_CPM_CONSOLE
|
||||
ret = cpm_uart_init_portdesc();
|
||||
if (ret)
|
||||
return ret;
|
||||
#endif
|
||||
|
||||
cpm_reg.nr = cpm_uart_nr;
|
||||
ret = uart_register_driver(&cpm_reg);
|
||||
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
for (i = 0; i < cpm_uart_nr; i++) {
|
||||
int con = cpm_uart_port_map[i];
|
||||
cpm_uart_ports[con].port.line = i;
|
||||
cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
|
||||
uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
|
||||
}
|
||||
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void __exit cpm_uart_exit(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < cpm_uart_nr; i++) {
|
||||
int con = cpm_uart_port_map[i];
|
||||
uart_remove_one_port(&cpm_reg, &cpm_uart_ports[con].port);
|
||||
}
|
||||
|
||||
driver_unregister(&cpm_scc_uart_driver);
|
||||
driver_unregister(&cpm_smc_uart_driver);
|
||||
uart_unregister_driver(&cpm_reg);
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -81,58 +81,11 @@ void cpm_line_cr_cmd(int line, int cmd)
|
|||
|
||||
void smc1_lineif(struct uart_cpm_port *pinfo)
|
||||
{
|
||||
volatile cpm8xx_t *cp = cpmp;
|
||||
|
||||
(void)cp; /* fix warning */
|
||||
#if defined (CONFIG_MPC885ADS)
|
||||
/* Enable SMC1 transceivers */
|
||||
{
|
||||
cp->cp_pepar |= 0x000000c0;
|
||||
cp->cp_pedir &= ~0x000000c0;
|
||||
cp->cp_peso &= ~0x00000040;
|
||||
cp->cp_peso |= 0x00000080;
|
||||
}
|
||||
#elif defined (CONFIG_MPC86XADS)
|
||||
unsigned int iobits = 0x000000c0;
|
||||
|
||||
if (!pinfo->is_portb) {
|
||||
cp->cp_pbpar |= iobits;
|
||||
cp->cp_pbdir &= ~iobits;
|
||||
cp->cp_pbodr &= ~iobits;
|
||||
} else {
|
||||
((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
|
||||
((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
|
||||
((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
|
||||
}
|
||||
#endif
|
||||
pinfo->brg = 1;
|
||||
}
|
||||
|
||||
void smc2_lineif(struct uart_cpm_port *pinfo)
|
||||
{
|
||||
volatile cpm8xx_t *cp = cpmp;
|
||||
|
||||
(void)cp; /* fix warning */
|
||||
#if defined (CONFIG_MPC885ADS)
|
||||
cp->cp_pepar |= 0x00000c00;
|
||||
cp->cp_pedir &= ~0x00000c00;
|
||||
cp->cp_peso &= ~0x00000400;
|
||||
cp->cp_peso |= 0x00000800;
|
||||
#elif defined (CONFIG_MPC86XADS)
|
||||
unsigned int iobits = 0x00000c00;
|
||||
|
||||
if (!pinfo->is_portb) {
|
||||
cp->cp_pbpar |= iobits;
|
||||
cp->cp_pbdir &= ~iobits;
|
||||
cp->cp_pbodr &= ~iobits;
|
||||
} else {
|
||||
((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
|
||||
((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
|
||||
((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
pinfo->brg = 2;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -142,21 +142,12 @@ void scc2_lineif(struct uart_cpm_port *pinfo)
|
|||
* be supported in a sane fashion.
|
||||
*/
|
||||
#ifndef CONFIG_STX_GP3
|
||||
#ifdef CONFIG_MPC8560_ADS
|
||||
volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
|
||||
io->iop_ppard |= 0x00000018;
|
||||
io->iop_psord &= ~0x00000008; /* Rx */
|
||||
io->iop_psord &= ~0x00000010; /* Tx */
|
||||
io->iop_pdird &= ~0x00000008; /* Rx */
|
||||
io->iop_pdird |= 0x00000010; /* Tx */
|
||||
#else
|
||||
volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
|
||||
io->iop_pparb |= 0x008b0000;
|
||||
io->iop_pdirb |= 0x00880000;
|
||||
io->iop_psorb |= 0x00880000;
|
||||
io->iop_pdirb &= ~0x00030000;
|
||||
io->iop_psorb &= ~0x00030000;
|
||||
#endif
|
||||
#endif
|
||||
cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff;
|
||||
cpm2_immr->im_cpmux.cmx_scr |= 0x00090000;
|
||||
|
|
|
|||
Loading…
Reference in New Issue