drm/i915/skl: Enabling PSR on Skylake

Mainly taking care of some register offsets, otherwise things are similar to
hsw. Also, programming ddi aux to use hardcoded values for psr data select.

v2: introduce  EDP_PSR_AUX_BASE macro (Chris)
v3: Moving to HW tracking for SKL+ platforms, so activating source psr during
psr_enabling and then avoiding psr entries and exits for each frontbuffer
updates.
v4: Using SKL DDI AUX regs instead of changing PSR_AUX regs definition (Rodrigo)

Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[danvet: Drop the hunks to short-circuit sw tracking: We'd need to
push this down one level, and I don't fully trust the test coverage
yet to do so. So much prefer we pick a whitelist approach for the
cases we know work correctly.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This commit is contained in:
Sonika Jindal 2015-01-22 14:30:54 +05:30 committed by Daniel Vetter
parent a50940510e
commit e3d9984510
3 changed files with 31 additions and 3 deletions

View File

@ -2457,7 +2457,8 @@ struct drm_i915_cmd_table {
#define HAS_DDI(dev) (INTEL_INFO(dev)->has_ddi)
#define HAS_FPGA_DBG_UNCLAIMED(dev) (INTEL_INFO(dev)->has_fpga_dbg)
#define HAS_PSR(dev) (IS_HASWELL(dev) || IS_BROADWELL(dev) || \
IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev) || \
IS_SKYLAKE(dev))
#define HAS_RUNTIME_PM(dev) (IS_GEN6(dev) || IS_HASWELL(dev) || \
IS_BROADWELL(dev) || IS_VALLEYVIEW(dev))
#define HAS_RC6(dev) (INTEL_INFO(dev)->gen >= 6)

View File

@ -3768,6 +3768,11 @@ enum punit_power_well {
#define DP_AUX_CH_CTL_PRECHARGE_TEST (1 << 11)
#define DP_AUX_CH_CTL_BIT_CLOCK_2X_MASK (0x7ff)
#define DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT 0
#define DP_AUX_CH_CTL_PSR_DATA_AUX_REG_SKL (1 << 14)
#define DP_AUX_CH_CTL_FS_DATA_AUX_REG_SKL (1 << 13)
#define DP_AUX_CH_CTL_GTC_DATA_AUX_REG_SKL (1 << 12)
#define DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL_MASK (1f << 5)
#define DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL(c) (((c) - 1) << 5)
#define DP_AUX_CH_CTL_SYNC_PULSE_SKL(c) ((c) - 1)
/*

View File

@ -142,6 +142,7 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t aux_clock_divider;
uint32_t aux_data_reg, aux_ctl_reg;
int precharge = 0x3;
static const uint8_t aux_msg[] = {
[0] = DP_AUX_NATIVE_WRITE << 4,
@ -164,16 +165,34 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
DP_PSR_ENABLE & ~DP_PSR_MAIN_LINK_ACTIVE);
aux_data_reg = (INTEL_INFO(dev)->gen >= 9) ?
DPA_AUX_CH_DATA1 : EDP_PSR_AUX_DATA1(dev);
aux_ctl_reg = (INTEL_INFO(dev)->gen >= 9) ?
DPA_AUX_CH_CTL : EDP_PSR_AUX_CTL(dev);
/* Setup AUX registers */
for (i = 0; i < sizeof(aux_msg); i += 4)
I915_WRITE(EDP_PSR_AUX_DATA1(dev) + i,
I915_WRITE(aux_data_reg + i,
intel_dp_pack_aux(&aux_msg[i], sizeof(aux_msg) - i));
I915_WRITE(EDP_PSR_AUX_CTL(dev),
if (INTEL_INFO(dev)->gen >= 9) {
uint32_t val;
val = I915_READ(aux_ctl_reg);
val &= ~DP_AUX_CH_CTL_TIME_OUT_MASK;
val |= DP_AUX_CH_CTL_TIME_OUT_1600us;
val &= ~DP_AUX_CH_CTL_MESSAGE_SIZE_MASK;
val |= (sizeof(aux_msg) << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
/* Use hardcoded data values for PSR */
val &= ~DP_AUX_CH_CTL_PSR_DATA_AUX_REG_SKL;
I915_WRITE(aux_ctl_reg, val);
} else {
I915_WRITE(aux_ctl_reg,
DP_AUX_CH_CTL_TIME_OUT_400us |
(sizeof(aux_msg) << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
(precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
(aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT));
}
}
static void vlv_psr_enable_source(struct intel_dp *intel_dp)
@ -351,6 +370,9 @@ void intel_psr_enable(struct intel_dp *intel_dp)
/* Enable PSR on the panel */
hsw_psr_enable_sink(intel_dp);
if (INTEL_INFO(dev)->gen >= 9)
intel_psr_activate(intel_dp);
} else {
vlv_psr_setup_vsc(intel_dp);