From e53111ad5deaef98d8c18a9933ef1f5624c5979d Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 3 Nov 2017 15:03:36 +0200 Subject: [PATCH] iio: proximity: sx9500: Assign interrupt from GpioIo() The commit 0f0796509c07 ("iio: remove gpio interrupt probing from drivers that use a single interrupt") removed custom IRQ assignment for the drivers which are enumerated via ACPI or OF. Unfortunately, some ACPI tables have IRQ line defined as GpioIo() resource and thus automatic IRQ allocation will fail. Partially revert the commit 0f0796509c07 to restore original behaviour. Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Jonathan Cameron --- drivers/iio/proximity/sx9500.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c index 53c5d653e780..df23dbcc030a 100644 --- a/drivers/iio/proximity/sx9500.c +++ b/drivers/iio/proximity/sx9500.c @@ -869,6 +869,7 @@ static int sx9500_init_device(struct iio_dev *indio_dev) static void sx9500_gpio_probe(struct i2c_client *client, struct sx9500_data *data) { + struct gpio_desc *gpiod_int; struct device *dev; if (!client) @@ -876,6 +877,14 @@ static void sx9500_gpio_probe(struct i2c_client *client, dev = &client->dev; + if (client->irq <= 0) { + gpiod_int = devm_gpiod_get(dev, SX9500_GPIO_INT, GPIOD_IN); + if (IS_ERR(gpiod_int)) + dev_err(dev, "gpio get irq failed\n"); + else + client->irq = gpiod_to_irq(gpiod_int); + } + data->gpiod_rst = devm_gpiod_get(dev, SX9500_GPIO_RESET, GPIOD_OUT_HIGH); if (IS_ERR(data->gpiod_rst)) { dev_warn(dev, "gpio get reset pin failed\n");