arm64: dts: rockchip: Add ethernet phy to rk3399-orangepi

Enables INTB.
The wiring is the same as the nanopi4, so this is heavily based on:
- [1a4e6203f0] arm64: dts: rockchip: Add nanopi4 ethernet phy
- [bc43cee88a] arm64: dts: rockchip: Update nanopi4 phy reset properties
by Robin Murphy.

Signed-off-by: Alexis Ballier <aballier@gentoo.org>
Cc: devicetree@vger.kernel.org
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20200206151025.3813-1-aballier@gentoo.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Alexis Ballier 2020-02-06 16:10:24 +01:00 committed by Heiko Stuebner
parent 6f7e1c1929
commit e5ab00edc3
1 changed files with 27 additions and 4 deletions

View File

@ -202,14 +202,27 @@ &gmac {
clock_in_out = "input";
phy-supply = <&vcc3v3_s3>;
phy-mode = "rgmii";
phy-handle = <&rtl8211e>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 50000>;
pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
tx_delay = <0x28>;
rx_delay = <0x11>;
status = "okay";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
rtl8211e: phy@1 {
reg = <1>;
interrupt-parent = <&gpio3>;
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <30000>;
reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
};
};
};
&gpu {
@ -537,6 +550,16 @@ pwr_btn: pwr-btn {
};
};
phy {
phy_intb: phy-intb {
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_rstb: phy-rstb {
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins =