mirror of https://gitee.com/openkylin/linux.git
regulator: fan53880: Add initial support
This patch adds support for ON Semiconductor FAN53880 regulator. The FAN53880 is an I2C porgrammable power management IC (PMIC) that contains a BUCK (step-down converter), four LDOs (low dropouts) and one BOOST (step-up converter). It is designed for mobile power applications. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Link: https://lore.kernel.org/r/20200702210846.31659-2-chf.fritz@googlemail.com Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Christoph Fritz
Mark Brown
parent
8cc31dc941
commit
e6dea51e2d
|
|
@ -336,6 +336,16 @@ config REGULATOR_FAN53555
|
|||
input voltage supply of 2.5V to 5.5V. The output voltage is
|
||||
programmed through an I2C interface.
|
||||
|
||||
config REGULATOR_FAN53880
|
||||
tristate "Fairchild FAN53880 Regulator"
|
||||
depends on I2C
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This driver supports Fairchild (ON Semiconductor) FAN53880
|
||||
regulator. The regulator is a programmable power management IC
|
||||
(PMIC), it is controlled by I2C and provides one BUCK, one BOOST
|
||||
and four LDO outputs.
|
||||
|
||||
config REGULATOR_GPIO
|
||||
tristate "GPIO regulator support"
|
||||
depends on GPIOLIB || COMPILE_TEST
|
||||
|
|
|
|||
|
|
@ -42,6 +42,7 @@ obj-$(CONFIG_REGULATOR_DA9211) += da9211-regulator.o
|
|||
obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
|
||||
obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
|
||||
obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
|
||||
obj-$(CONFIG_REGULATOR_FAN53880) += fan53880.o
|
||||
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_HI6421V530) += hi6421v530-regulator.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,179 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
#include <linux/module.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
|
||||
enum fan53880_regulator_ids {
|
||||
FAN53880_LDO1,
|
||||
FAN53880_LDO2,
|
||||
FAN53880_LDO3,
|
||||
FAN53880_LDO4,
|
||||
FAN53880_BUCK,
|
||||
FAN53880_BOOST,
|
||||
};
|
||||
|
||||
enum fan53880_registers {
|
||||
FAN53880_PRODUCT_ID = 0x00,
|
||||
FAN53880_SILICON_REV,
|
||||
FAN53880_BUCKVOUT,
|
||||
FAN53880_BOOSTVOUT,
|
||||
FAN53880_LDO1VOUT,
|
||||
FAN53880_LDO2VOUT,
|
||||
FAN53880_LDO3VOUT,
|
||||
FAN53880_LDO4VOUT,
|
||||
FAN53880_IOUT,
|
||||
FAN53880_ENABLE,
|
||||
FAN53880_ENABLE_BOOST,
|
||||
};
|
||||
|
||||
#define FAN53880_ID 0x01
|
||||
|
||||
static const struct regulator_ops fan53880_ops = {
|
||||
.list_voltage = regulator_list_voltage_linear_range,
|
||||
.map_voltage = regulator_map_voltage_linear_range,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
};
|
||||
|
||||
#define FAN53880_LDO(_num, _supply, _default) \
|
||||
[FAN53880_LDO ## _num] = { \
|
||||
.name = "LDO"#_num, \
|
||||
.of_match = of_match_ptr("LDO"#_num), \
|
||||
.regulators_node = of_match_ptr("regulators"), \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.linear_ranges = (struct linear_range[]) { \
|
||||
REGULATOR_LINEAR_RANGE(_default, 0x0, 0x0, 0), \
|
||||
REGULATOR_LINEAR_RANGE(800000, 0xf, 0x73, 25000), \
|
||||
}, \
|
||||
.n_linear_ranges = 2, \
|
||||
.vsel_reg = FAN53880_LDO ## _num ## VOUT, \
|
||||
.vsel_mask = 0x7f, \
|
||||
.enable_reg = FAN53880_ENABLE, \
|
||||
.enable_mask = BIT(_num - 1), \
|
||||
.enable_time = 150, \
|
||||
.supply_name = _supply, \
|
||||
.ops = &fan53880_ops, \
|
||||
}
|
||||
|
||||
static const struct regulator_desc fan53880_regulators[] = {
|
||||
FAN53880_LDO(1, "VIN12", 2800000),
|
||||
FAN53880_LDO(2, "VIN12", 2800000),
|
||||
FAN53880_LDO(3, "VIN3", 1800000),
|
||||
FAN53880_LDO(4, "VIN4", 1800000),
|
||||
[FAN53880_BUCK] = {
|
||||
.name = "BUCK",
|
||||
.of_match = of_match_ptr("BUCK"),
|
||||
.regulators_node = of_match_ptr("regulators"),
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.linear_ranges = (struct linear_range[]) {
|
||||
REGULATOR_LINEAR_RANGE(1100000, 0x0, 0x0, 0),
|
||||
REGULATOR_LINEAR_RANGE(600000, 0x1f, 0xf7, 12500),
|
||||
},
|
||||
.n_linear_ranges = 2,
|
||||
.vsel_reg = FAN53880_BUCKVOUT,
|
||||
.vsel_mask = 0x7f,
|
||||
.enable_reg = FAN53880_ENABLE,
|
||||
.enable_mask = 0x10,
|
||||
.enable_time = 480,
|
||||
.supply_name = "PVIN",
|
||||
.ops = &fan53880_ops,
|
||||
},
|
||||
[FAN53880_BOOST] = {
|
||||
.name = "BOOST",
|
||||
.of_match = of_match_ptr("BOOST"),
|
||||
.regulators_node = of_match_ptr("regulators"),
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.linear_ranges = (struct linear_range[]) {
|
||||
REGULATOR_LINEAR_RANGE(5000000, 0x0, 0x0, 0),
|
||||
REGULATOR_LINEAR_RANGE(3000000, 0x4, 0x70, 25000),
|
||||
},
|
||||
.n_linear_ranges = 2,
|
||||
.vsel_reg = FAN53880_BOOSTVOUT,
|
||||
.vsel_mask = 0x7f,
|
||||
.enable_reg = FAN53880_ENABLE_BOOST,
|
||||
.enable_mask = 0xff,
|
||||
.enable_time = 580,
|
||||
.supply_name = "PVIN",
|
||||
.ops = &fan53880_ops,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct regmap_config fan53880_regmap = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.max_register = FAN53880_ENABLE_BOOST,
|
||||
};
|
||||
|
||||
static int fan53880_i2c_probe(struct i2c_client *i2c,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct regulator_config config = { };
|
||||
struct regulator_dev *rdev;
|
||||
struct regmap *regmap;
|
||||
int i, ret;
|
||||
unsigned int data;
|
||||
|
||||
regmap = devm_regmap_init_i2c(i2c, &fan53880_regmap);
|
||||
if (IS_ERR(regmap)) {
|
||||
ret = PTR_ERR(regmap);
|
||||
dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = regmap_read(regmap, FAN53880_PRODUCT_ID, &data);
|
||||
if (ret < 0) {
|
||||
dev_err(&i2c->dev, "Failed to read PRODUCT_ID: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
if (data != FAN53880_ID) {
|
||||
dev_err(&i2c->dev, "Unsupported device id: 0x%x.\n", data);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
config.dev = &i2c->dev;
|
||||
config.init_data = NULL;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(fan53880_regulators); i++) {
|
||||
rdev = devm_regulator_register(&i2c->dev,
|
||||
&fan53880_regulators[i],
|
||||
&config);
|
||||
if (IS_ERR(rdev)) {
|
||||
ret = PTR_ERR(rdev);
|
||||
dev_err(&i2c->dev, "Failed to register %s: %d\n",
|
||||
fan53880_regulators[i].name, ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id fan53880_dt_ids[] = {
|
||||
{ .compatible = "onnn,fan53880", },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, fan53880_dt_ids);
|
||||
|
||||
static const struct i2c_device_id fan53880_i2c_id[] = {
|
||||
{ "fan53880", },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, fan53880_i2c_id);
|
||||
|
||||
static struct i2c_driver fan53880_regulator_driver = {
|
||||
.driver = {
|
||||
.name = "fan53880",
|
||||
.of_match_table = of_match_ptr(fan53880_dt_ids),
|
||||
},
|
||||
.probe = fan53880_i2c_probe,
|
||||
.id_table = fan53880_i2c_id,
|
||||
};
|
||||
module_i2c_driver(fan53880_regulator_driver);
|
||||
|
||||
MODULE_DESCRIPTION("FAN53880 PMIC voltage regulator driver");
|
||||
MODULE_AUTHOR("Christoph Fritz <chf.fritz@googlemail.com>");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue