From e6f30deafe61179df048ac9040fe2bdf73a996c3 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 24 Oct 2012 11:59:24 +0800 Subject: [PATCH] USB: check port changes before hub runtime suspend for some bug device The hub status endpoint has a long 'bInterval', which is 255ms for FS/LS device and 256ms for HS device according to USB 2.0 spec, so the device connection change may be reported later more than 255ms via status pipe. The connection change in hub may have been happened already on the downstream ports, but no status URB completes when it is killed in hub_suspend(auto), so the connection change may be missed by some buggy hub devices, which won't generate remote wakeup signal after their remote wakeup is enabled and they are put into suspend state. The problem can be observed at least on the below Genesys Logic, Inc. hub devices: 0x05e3,0x0606 0x05e3,0x0608 In theory, there is no way to fix the problem completely, but we can make it less likely to occur by this patch. This patch introduces one quirk of HUB_QUIRK_CHECK_PORTS_AUTOSUSPEND to check ports' change during hub_suspend(auto) for the buggy devices. If ports' change is found, terminate the auto suspend and return to working state. So for the buggy hubs, if the connection change happend before the ports' check, it can be handled correctly. If it happens between the ports' check and enabling remote wakeup/entering suspend, it will be missed. Considered the interval is quite short, it is very less likely to happen during the window. Acked-by: Alan Stern Signed-off-by: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index e729e94cb751..ff86355d0dfc 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -39,6 +39,9 @@ #endif #endif +#define USB_VENDOR_GENESYS_LOGIC 0x05e3 +#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01 + struct usb_port { struct usb_device *child; struct device dev; @@ -86,6 +89,8 @@ struct usb_hub { unsigned quiescing:1; unsigned disconnected:1; + unsigned quirk_check_port_auto_suspend:1; + unsigned has_indicators:1; u8 indicator[USB_MAXCHILDREN]; struct delayed_work leds; @@ -1667,6 +1672,9 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) if (hdev->speed == USB_SPEED_HIGH) highspeed_hubs++; + if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND) + hub->quirk_check_port_auto_suspend = 1; + if (hub_configure(hub, endpoint) >= 0) return 0; @@ -3125,6 +3133,21 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) #endif +static int check_ports_changed(struct usb_hub *hub) +{ + int port1; + + for (port1 = 1; port1 <= hub->hdev->maxchild; ++port1) { + u16 portstatus, portchange; + int status; + + status = hub_port_status(hub, port1, &portstatus, &portchange); + if (!status && portchange) + return 1; + } + return 0; +} + static int hub_suspend(struct usb_interface *intf, pm_message_t msg) { struct usb_hub *hub = usb_get_intfdata (intf); @@ -3143,6 +3166,16 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) return -EBUSY; } } + + if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) { + /* check if there are changes pending on hub ports */ + if (check_ports_changed(hub)) { + if (PMSG_IS_AUTO(msg)) + return -EBUSY; + pm_wakeup_event(&hdev->dev, 2000); + } + } + if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) { /* Enable hub to send remote wakeup for all ports. */ for (port1 = 1; port1 <= hdev->maxchild; port1++) { @@ -4647,6 +4680,11 @@ static int hub_thread(void *__unused) } static const struct usb_device_id hub_id_table[] = { + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_INT_CLASS, + .idVendor = USB_VENDOR_GENESYS_LOGIC, + .bInterfaceClass = USB_CLASS_HUB, + .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND}, { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS, .bDeviceClass = USB_CLASS_HUB}, { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,