spi: use new `spi_transfer_delay_exec` helper where straightforward

For many places in the spi drivers, using the new `spi_transfer_delay`
helper is straightforward.
It's just replacing:
```
  if (t->delay_usecs)
     udelay(t->delay_usecs);
```
with `spi_transfer_delay(t)` which handles both `delay_usecs` and the new
`delay` field.

This change replaces in all places (in the spi drivers)  where this change
is simple.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20190926105147.7839-10-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/spi-atmel.c

@@ -1366,8 +1366,7 @@ static int atmel_spi_one_transfer(struct spi_master *master,
 		&& as->use_pdc)
 		atmel_spi_dma_unmap_xfer(master, xfer);
 
-	if (xfer->delay_usecs)
-		udelay(xfer->delay_usecs);
+	spi_transfer_delay_exec(xfer);
 
 	if (xfer->cs_change) {
 		if (list_is_last(&xfer->transfer_list,

drivers/spi/spi-bcm63xx-hsspi.c

@@ -291,8 +291,7 @@ static int bcm63xx_hsspi_transfer_one(struct spi_master *master,
 
 		msg->actual_length += t->len;
 
-		if (t->delay_usecs)
-			udelay(t->delay_usecs);
+		spi_transfer_delay_exec(t);
 
 		if (t->cs_change)
 			bcm63xx_hsspi_set_cs(bs, spi->chip_select, false);

drivers/spi/spi-cavium.c

@@ -119,8 +119,7 @@ static int octeon_spi_do_transfer(struct octeon_spi *p,
 			*rx_buf++ = (u8)v;
 		}
 
-	if (xfer->delay_usecs)
-		udelay(xfer->delay_usecs);
+	spi_transfer_delay_exec(xfer);
 
 	return xfer->len;
 }

drivers/spi/spi-fsl-dspi.c

@@ -827,8 +827,7 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr,
 			dev_err(&dspi->pdev->dev,
 				"Waiting for transfer to complete failed!\n");
 
-		if (transfer->delay_usecs)
-			udelay(transfer->delay_usecs);
+		spi_transfer_delay_exec(transfer);
 	}
 
 out:

drivers/spi/spi-fsl-espi.c

@@ -427,8 +427,7 @@ static int fsl_espi_trans(struct spi_message *m, struct spi_transfer *trans)
 
 	ret = fsl_espi_bufs(spi, trans);
 
-	if (trans->delay_usecs)
-		udelay(trans->delay_usecs);
+	spi_transfer_delay_exec(trans);
 
 	return ret;
 }

drivers/spi/spi-fsl-spi.c

@@ -416,8 +416,7 @@ static int fsl_spi_do_one_msg(struct spi_master *master,
 		}
 		m->actual_length += t->len;
 
-		if (t->delay_usecs)
-			udelay(t->delay_usecs);
+		spi_transfer_delay_exec(t);
 
 		if (cs_change) {
 			ndelay(nsecs);

drivers/spi/spi-mpc512x-psc.c

@@ -311,8 +311,7 @@ static int mpc512x_psc_spi_msg_xfer(struct spi_master *master,
 			break;
 		m->actual_length += t->len;
 
-		if (t->delay_usecs)
-			udelay(t->delay_usecs);
+		spi_transfer_delay_exec(t);
 
 		if (cs_change)
 			mpc512x_psc_spi_deactivate_cs(spi);

drivers/spi/spi-mpc52xx-psc.c

@@ -234,8 +234,7 @@ static void mpc52xx_psc_spi_work(struct work_struct *work)
 				break;
 			m->actual_length += t->len;
 
-			if (t->delay_usecs)
-				udelay(t->delay_usecs);
+			spi_transfer_delay_exec(t);
 
 			if (cs_change)
 				mpc52xx_psc_spi_deactivate_cs(spi);

drivers/spi/spi-omap-100k.c

@@ -321,8 +321,7 @@ static int omap1_spi100k_transfer_one_message(struct spi_master *master,
 			}
 		}
 
-		if (t->delay_usecs)
-			udelay(t->delay_usecs);
+		spi_transfer_delay_exec(t);
 
 		/* ignore the "leave it on after last xfer" hint */
 

drivers/spi/spi-pl022.c

@@ -485,12 +485,11 @@ static void giveback(struct pl022 *pl022)
 					struct spi_transfer, transfer_list);
 
 	/* Delay if requested before any change in chip select */
-	if (last_transfer->delay_usecs)
-		/*
-		 * FIXME: This runs in interrupt context.
-		 * Is this really smart?
-		 */
-		udelay(last_transfer->delay_usecs);
+	/*
+	 * FIXME: This runs in interrupt context.
+	 * Is this really smart?
+	 */
+	spi_transfer_delay_exec(last_transfer);
 
 	if (!last_transfer->cs_change) {
 		struct spi_message *next_msg;
@@ -1401,12 +1400,11 @@ static void pump_transfers(unsigned long data)
 		previous = list_entry(transfer->transfer_list.prev,
 					struct spi_transfer,
 					transfer_list);
-		if (previous->delay_usecs)
-			/*
-			 * FIXME: This runs in interrupt context.
-			 * Is this really smart?
-			 */
-			udelay(previous->delay_usecs);
+		/*
+		 * FIXME: This runs in interrupt context.
+		 * Is this really smart?
+		 */
+		spi_transfer_delay_exec(previous);
 
 		/* Reselect chip select only if cs_change was requested */
 		if (previous->cs_change)
@@ -1520,8 +1518,7 @@ static void do_polling_transfer(struct pl022 *pl022)
 			previous =
 			    list_entry(transfer->transfer_list.prev,
 				       struct spi_transfer, transfer_list);
-			if (previous->delay_usecs)
-				udelay(previous->delay_usecs);
+			spi_transfer_delay_exec(previous);
 			if (previous->cs_change)
 				pl022_cs_control(pl022, SSP_CHIP_SELECT);
 		} else {

drivers/spi/spi-sc18is602.c

@@ -211,8 +211,7 @@ static int sc18is602_transfer_one(struct spi_master *master,
 		}
 		status = 0;
 
-		if (t->delay_usecs)
-			udelay(t->delay_usecs);
+		spi_transfer_delay_exec(t);
 	}
 	m->status = status;
 	spi_finalize_current_message(master);

drivers/spi/spi-sh-hspi.c

@@ -190,8 +190,7 @@ static int hspi_transfer_one_message(struct spi_controller *ctlr,
 
 		msg->actual_length += t->len;
 
-		if (t->delay_usecs)
-			udelay(t->delay_usecs);
+		spi_transfer_delay_exec(t);
 
 		if (cs_change) {
 			ndelay(nsecs);

drivers/spi/spi-topcliff-pch.c

@@ -1229,12 +1229,7 @@ static void pch_spi_process_messages(struct work_struct *pwork)
 			"%s:data->current_msg->actual_length=%d\n",
 			__func__, data->current_msg->actual_length);
 
-		/* check for delay */
-		if (data->cur_trans->delay_usecs) {
-			dev_dbg(&data->master->dev, "%s:delay in usec=%d\n",
-				__func__, data->cur_trans->delay_usecs);
-			udelay(data->cur_trans->delay_usecs);
-		}
+		spi_transfer_delay_exec(data->cur_trans);
 
 		spin_lock(&data->lock);
 

drivers/spi/spi-txx9.c

@@ -248,8 +248,7 @@ static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m)
 			len -= count * wsize;
 		}
 		m->actual_length += t->len;
-		if (t->delay_usecs)
-			udelay(t->delay_usecs);
+		spi_transfer_delay_exec(t);
 
 		if (!cs_change)
 			continue;

drivers/spi/spi-xcomm.c

@@ -188,8 +188,7 @@ static int spi_xcomm_transfer_one(struct spi_master *master,
 		}
 		status = 0;
 
-		if (t->delay_usecs)
-			udelay(t->delay_usecs);
+		spi_transfer_delay_exec(t);
 
 		is_first = false;
 	}