diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4350.txt b/Documentation/devicetree/bindings/iio/frequency/adf4350.txt new file mode 100644 index 000000000000..f8c181d81d2d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/frequency/adf4350.txt @@ -0,0 +1,86 @@ +Analog Devices ADF4350/ADF4351 device driver + +Required properties: + - compatible: Should be one of + * "adi,adf4350": When using the ADF4350 device + * "adi,adf4351": When using the ADF4351 device + - reg: SPI chip select numbert for the device + - spi-max-frequency: Max SPI frequency to use (< 20000000) + - clocks: From common clock binding. Clock is phandle to clock for + ADF435x Reference Clock (CLKIN). + +Optional properties: + - gpios: GPIO Lock detect - If set with a valid phandle and GPIO number, + pll lock state is tested upon read. + - adi,channel-spacing: Channel spacing in Hz (influences MODULUS). + - adi,power-up-frequency: If set in Hz the PLL tunes to + the desired frequency on probe. + - adi,reference-div-factor: If set the driver skips dynamic calculation + and uses this default value instead. + - adi,reference-doubler-enable: Enables reference doubler. + - adi,reference-div2-enable: Enables reference divider. + - adi,phase-detector-polarity-positive-enable: Enables positive phase + detector polarity. Default = negative. + - adi,lock-detect-precision-6ns-enable: Enables 6ns lock detect precision. + Default = 10ns. + - adi,lock-detect-function-integer-n-enable: Enables lock detect + for integer-N mode. Default = factional-N mode. + - adi,charge-pump-current: Charge pump current in mA. + Default = 2500mA. + - adi,muxout-select: On chip multiplexer output selection. + Valid values for the multiplexer output are: + 0: Three-State Output (default) + 1: DVDD + 2: DGND + 3: R-Counter output + 4: N-Divider output + 5: Analog lock detect + 6: Digital lock detect + - adi,low-spur-mode-enable: Enables low spur mode. + Default = Low noise mode. + - adi,cycle-slip-reduction-enable: Enables cycle slip reduction. + - adi,charge-cancellation-enable: Enabled charge pump + charge cancellation for integer-N modes. + - adi,anti-backlash-3ns-enable: Enables 3ns antibacklash pulse width + for integer-N modes. + - adi,band-select-clock-mode-high-enable: Enables faster band + selection logic. + - adi,12bit-clk-divider: Clock divider value used when + adi,12bit-clkdiv-mode != 0 + - adi,clk-divider-mode: + Valid values for the clkdiv mode are: + 0: Clock divider off (default) + 1: Fast lock enable + 2: Phase resync enable + - adi,aux-output-enable: Enables auxiliary RF output. + - adi,aux-output-fundamental-enable: Selects fundamental VCO output on + the auxiliary RF output. Default = Output of RF dividers. + - adi,mute-till-lock-enable: Enables Mute-Till-Lock-Detect function. + - adi,output-power: Output power selection. + Valid values for the power mode are: + 0: -4dBm (default) + 1: -1dBm + 2: +2dBm + 3: +5dBm + - adi,aux-output-power: Auxiliary output power selection. + Valid values for the power mode are: + 0: -4dBm (default) + 1: -1dBm + 2: +2dBm + 3: +5dBm + + +Example: + lo_pll0_rx_adf4351: adf4351-rx-lpc@4 { + compatible = "adi,adf4351"; + reg = <4>; + spi-max-frequency = <10000000>; + clocks = <&clk0_ad9523 9>; + clock-names = "clkin"; + adi,channel-spacing = <10000>; + adi,power-up-frequency = <2400000000>; + adi,phase-detector-polarity-positive-enable; + adi,charge-pump-current = <2500>; + adi,output-power = <3>; + adi,mute-till-lock-enable; + }; diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c index f6849c8b6a90..a4157cdb314d 100644 --- a/drivers/iio/frequency/adf4350.c +++ b/drivers/iio/frequency/adf4350.c @@ -18,6 +18,8 @@ #include #include #include +#include +#include #include #include @@ -375,14 +377,138 @@ static const struct iio_info adf4350_info = { .driver_module = THIS_MODULE, }; +#ifdef CONFIG_OF +static struct adf4350_platform_data *adf4350_parse_dt(struct device *dev) +{ + struct device_node *np = dev->of_node; + struct adf4350_platform_data *pdata; + unsigned int tmp; + int ret; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "could not allocate memory for platform data\n"); + return NULL; + } + + strncpy(&pdata->name[0], np->name, SPI_NAME_SIZE - 1); + + tmp = 10000; + of_property_read_u32(np, "adi,channel-spacing", &tmp); + pdata->channel_spacing = tmp; + + tmp = 0; + of_property_read_u32(np, "adi,power-up-frequency", &tmp); + pdata->power_up_frequency = tmp; + + tmp = 0; + of_property_read_u32(np, "adi,reference-div-factor", &tmp); + pdata->ref_div_factor = tmp; + + ret = of_get_gpio(np, 0); + if (ret < 0) + pdata->gpio_lock_detect = -1; + else + pdata->gpio_lock_detect = ret; + + pdata->ref_doubler_en = of_property_read_bool(np, + "adi,reference-doubler-enable"); + pdata->ref_div2_en = of_property_read_bool(np, + "adi,reference-div2-enable"); + + /* r2_user_settings */ + pdata->r2_user_settings = of_property_read_bool(np, + "adi,phase-detector-polarity-positive-enable") ? + ADF4350_REG2_PD_POLARITY_POS : 0; + pdata->r2_user_settings |= of_property_read_bool(np, + "adi,lock-detect-precision-6ns-enable") ? + ADF4350_REG2_LDP_6ns : 0; + pdata->r2_user_settings |= of_property_read_bool(np, + "adi,lock-detect-function-integer-n-enable") ? + ADF4350_REG2_LDF_INT_N : 0; + + tmp = 2500; + of_property_read_u32(np, "adi,charge-pump-current", &tmp); + pdata->r2_user_settings |= ADF4350_REG2_CHARGE_PUMP_CURR_uA(tmp); + + tmp = 0; + of_property_read_u32(np, "adi,muxout-select", &tmp); + pdata->r2_user_settings |= ADF4350_REG2_MUXOUT(tmp); + + pdata->r2_user_settings |= of_property_read_bool(np, + "adi,low-spur-mode-enable") ? + ADF4350_REG2_NOISE_MODE(0x3) : 0; + + /* r3_user_settings */ + + pdata->r3_user_settings = of_property_read_bool(np, + "adi,cycle-slip-reduction-enable") ? + ADF4350_REG3_12BIT_CSR_EN : 0; + pdata->r3_user_settings |= of_property_read_bool(np, + "adi,charge-cancellation-enable") ? + ADF4351_REG3_CHARGE_CANCELLATION_EN : 0; + + pdata->r3_user_settings |= of_property_read_bool(np, + "adi,anti-backlash-3ns-enable") ? + ADF4351_REG3_ANTI_BACKLASH_3ns_EN : 0; + pdata->r3_user_settings |= of_property_read_bool(np, + "adi,band-select-clock-mode-high-enable") ? + ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH : 0; + + tmp = 0; + of_property_read_u32(np, "adi,12bit-clk-divider", &tmp); + pdata->r3_user_settings |= ADF4350_REG3_12BIT_CLKDIV(tmp); + + tmp = 0; + of_property_read_u32(np, "adi,clk-divider-mode", &tmp); + pdata->r3_user_settings |= ADF4350_REG3_12BIT_CLKDIV_MODE(tmp); + + /* r4_user_settings */ + + pdata->r4_user_settings = of_property_read_bool(np, + "adi,aux-output-enable") ? + ADF4350_REG4_AUX_OUTPUT_EN : 0; + pdata->r4_user_settings |= of_property_read_bool(np, + "adi,aux-output-fundamental-enable") ? + ADF4350_REG4_AUX_OUTPUT_FUND : 0; + pdata->r4_user_settings |= of_property_read_bool(np, + "adi,mute-till-lock-enable") ? + ADF4350_REG4_MUTE_TILL_LOCK_EN : 0; + + tmp = 0; + of_property_read_u32(np, "adi,output-power", &tmp); + pdata->r4_user_settings |= ADF4350_REG4_OUTPUT_PWR(tmp); + + tmp = 0; + of_property_read_u32(np, "adi,aux-output-power", &tmp); + pdata->r4_user_settings |= ADF4350_REG4_AUX_OUTPUT_PWR(tmp); + + return pdata; +} +#else +static +struct adf4350_platform_data *adf4350_parse_dt(struct device *dev) +{ + return NULL; +} +#endif + static int adf4350_probe(struct spi_device *spi) { - struct adf4350_platform_data *pdata = spi->dev.platform_data; + struct adf4350_platform_data *pdata; struct iio_dev *indio_dev; struct adf4350_state *st; struct clk *clk = NULL; int ret; + if (spi->dev.of_node) { + pdata = adf4350_parse_dt(&spi->dev); + if (pdata == NULL) + return -EINVAL; + } else { + pdata = spi->dev.platform_data; + } + if (!pdata) { dev_warn(&spi->dev, "no platform data? using default\n"); pdata = &default_pdata;