phy: for 5.7

*) Rename and Re-design phy-cadence-dp driver to phy-cadence-torrent driver
 *) Add new PHY driver for Qualcomm 28nm Hi-Speed USB PHY
 *) Add new PHY driver for Qualcomm Super Speed PHY in QCS404
 *) Add support for Qualcomm PCIe QMP/QHP PHY in SDM845 to phy-qcom-qmp driver
 *) Add support for Qualcomm UFS PHY in MSM8996 to phy-qcom-qmp driver
 *) Add support for an additional reference clock in Mediatek phy-mtk-tphy driver
 *) Add support for configuring tuning parameters in Mediatek phy-mtk-tphy driver
 *) Add support for GMII PHY in TI K3 AM654x/J721E SoCs to phy-gmii-sel driver
 *) Add support for USB2 PHY in Amlogic A1 SoC Family to phy-meson-g12a-usb2
    driver
 *) Add support for USB3/USB2/PCIe PHY in Socionext Pro5 SoC to
    phy-uniphier-usb3ss/phy-uniphier-usb3hs/phy-uniphier-pcie driver respectively
 *) Add support for QUSB2 PHY in Qualcomm SC7180 in driver
 *) Convert dt-bindings of Cadence DP, Qualcomm QUSB2 to YAML format
 
 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCgAsFiEEUXMr/TfP2p4suIY5Dlx4XIBNgtkFAl51P+IOHGtpc2hvbkB0
 aS5jb20ACgkQDlx4XIBNgtmEUQ//cnSP2uYWIfi7UXEMBqSMjwOeGqG8mLNNaLFh
 L3+AXf60I78wHvnPOu3u5kGi5P82YnkDeBnxKhElrNxtcv3iWxHswU2DKwr3i+/S
 OsPgBKTvYYoqcpeM/nf2hYZWJ8DofA0wuQ2o7n67Ldrm+QWORZzwohir0JAiNCl9
 5+XAQo7gnQqUrsfQ1uuCkcYVM5hoE/7HebaxcXMYDdPfttz+QhZZ4XjHgh4KAiGO
 MHn0aiF6nNJz465Un6YF+rFAcQjkl8R7WK93hCW2YPU2l2nvR+Z7cc7GfVIWPoss
 Rv9dUDtdXEJxPxZNaaQWqx+fyr3JmRm3hM53oj/aocZkxzH9omt+HNA5F98EP9S7
 X9YbxG/xRkf0sTfHFJbrGKZMXJn6u+jmJP54R3YhHqt1oBtHyQ1nCaqWLg3Lj7gx
 vaAV50dtwA0jkZVxP2iyAfGUBxG2NlDLeDZt7XUxZWGOyrwbujqt4PcxMyxS1tRs
 LHaT4xDBqR2pLbElx3omnx2q5U2wAW37yUzDMQ+q9mFHJhSMZ+vwkk418cleMaQE
 itu3Lg0I3uy3WIYj7V/xkAhEHH+MclmaBLOdtAA0Je75Zw8p6yDubv93A5lEmlrY
 P5ePuhgi/jBUqfYrtbzAP3v+vkC10auDDmA3342AaILwZ6LkWz6sqa8w6urT+6za
 2twcuWI=
 =+CzV
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 5.7

*) Rename and Re-design phy-cadence-dp driver to phy-cadence-torrent driver
*) Add new PHY driver for Qualcomm 28nm Hi-Speed USB PHY
*) Add new PHY driver for Qualcomm Super Speed PHY in QCS404
*) Add support for Qualcomm PCIe QMP/QHP PHY in SDM845 to phy-qcom-qmp driver
*) Add support for Qualcomm UFS PHY in MSM8996 to phy-qcom-qmp driver
*) Add support for an additional reference clock in Mediatek phy-mtk-tphy driver
*) Add support for configuring tuning parameters in Mediatek phy-mtk-tphy driver
*) Add support for GMII PHY in TI K3 AM654x/J721E SoCs to phy-gmii-sel driver
*) Add support for USB2 PHY in Amlogic A1 SoC Family to phy-meson-g12a-usb2
   driver
*) Add support for USB3/USB2/PCIe PHY in Socionext Pro5 SoC to
   phy-uniphier-usb3ss/phy-uniphier-usb3hs/phy-uniphier-pcie driver respectively
*) Add support for QUSB2 PHY in Qualcomm SC7180 in driver
*) Convert dt-bindings of Cadence DP, Qualcomm QUSB2 to YAML format

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (52 commits)
  phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY
  phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY
  dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters
  phy: qcom-qusb2: Add generic QUSB2 V2 PHY support
  dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180
  dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml
  phy: rk-inno-usb2: Decrease verbosity of repeating log.
  phy: amlogic: Add Amlogic A1 USB2 PHY Driver
  dt-bindings: phy: Add Amlogic A1 USB2 PHY Bindings
  phy: ti: gmii-sel: add support for am654x/j721e soc
  dt-bindings: phy: ti: gmii-sel: add support for am654x/j721e soc
  phy: qualcomm: usb: Add SuperSpeed PHY driver
  dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings
  phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver
  dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding
  dt-bindings: phy: remove qcom-dwc3-usb-phy
  phy: phy-mtk-tphy: add a new reference clock
  phy: phy-mtk-tphy: remove unused u3phya_ref clock
  phy: phy-mtk-tphy: make the ref clock optional
  phy: phy-mtk-tphy: add a property for internal resistance
  ...

Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml

@@ -14,6 +14,7 @@ properties:
   compatible:
     enum:
       - amlogic,meson-g12a-usb2-phy
+      - amlogic,meson-a1-usb2-phy
 
   reg:
     maxItems: 1
@@ -49,6 +50,19 @@ required:
   - reset-names
   - "#phy-cells"
 
+if:
+  properties:
+    compatible:
+      enum:
+        - amlogic,meson-a1-usb-ctrl
+
+then:
+  properties:
+    power-domains:
+      maxItems: 1
+  required:
+    - power-domains
+
 examples:
   - |
     phy@36000 {

Documentation/devicetree/bindings/phy/phy-cadence-dp.txt

@@ -1,30 +0,0 @@
-Cadence MHDP DisplayPort SD0801 PHY binding
-===========================================
-
-This binding describes the Cadence SD0801 PHY hardware included with
-the Cadence MHDP DisplayPort controller.
-
--------------------------------------------------------------------------------
-Required properties (controller (parent) node):
-- compatible	: Should be "cdns,dp-phy"
-- reg		: Defines the following sets of registers in the parent
-		  mhdp device:
-			- Offset of the DPTX PHY configuration registers
-			- Offset of the SD0801 PHY configuration registers
-- #phy-cells	: from the generic PHY bindings, must be 0.
-
-Optional properties:
-- num_lanes	: Number of DisplayPort lanes to use (1, 2 or 4)
-- max_bit_rate	: Maximum DisplayPort link bit rate to use, in Mbps (2160,
-		  2430, 2700, 3240, 4320, 5400 or 8100)
--------------------------------------------------------------------------------
-
-Example:
-	dp_phy: phy@f0fb030a00 {
-		compatible = "cdns,dp-phy";
-		reg = <0xf0 0xfb030a00 0x0 0x00000040>,
-		      <0xf0 0xfb500000 0x0 0x00100000>;
-		num_lanes = <4>;
-		max_bit_rate = <8100>;
-		#phy-cells = <0>;
-	};

Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml

@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence Torrent SD0801 PHY binding for DisplayPort
+
+description:
+  This binding describes the Cadence SD0801 PHY (also known as Torrent PHY)
+  hardware included with the Cadence MHDP DisplayPort controller.
+
+maintainers:
+  - Swapnil Jakhade <sjakhade@cadence.com>
+  - Yuti Amonkar <yamonkar@cadence.com>
+
+properties:
+  compatible:
+    enum:
+      - cdns,torrent-phy
+      - ti,j721e-serdes-10g
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    maxItems: 1
+    description:
+      PHY reference clock. Must contain an entry in clock-names.
+
+  clock-names:
+    const: refclk
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: Offset of the Torrent PHY configuration registers.
+      - description: Offset of the DPTX PHY configuration registers.
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: torrent_phy
+      - const: dptx_phy
+
+  resets:
+    maxItems: 1
+    description:
+      Torrent PHY reset.
+      See Documentation/devicetree/bindings/reset/reset.txt
+
+patternProperties:
+  '^phy@[0-7]+$':
+    type: object
+    description:
+      Each group of PHY lanes with a single master lane should be represented as a sub-node.
+    properties:
+      reg:
+        description:
+          The master lane number. This is the lowest numbered lane in the lane group.
+
+      resets:
+        minItems: 1
+        maxItems: 4
+        description:
+          Contains list of resets, one per lane, to get all the link lanes out of reset.
+
+      "#phy-cells":
+        const: 0
+
+      cdns,phy-type:
+        description:
+          Specifies the type of PHY for which the group of PHY lanes is used.
+          Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+          - enum: [1, 2, 3, 4, 5, 6]
+
+      cdns,num-lanes:
+        description:
+          Number of DisplayPort lanes.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+          - enum: [1, 2, 4]
+        default: 4
+
+      cdns,max-bit-rate:
+        description:
+          Maximum DisplayPort link bit rate to use, in Mbps
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+          - enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100]
+        default: 8100
+
+    required:
+      - reg
+      - resets
+      - "#phy-cells"
+      - cdns,phy-type
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+    torrent_phy: torrent-phy@f0fb500000 {
+          compatible = "cdns,torrent-phy";
+          reg = <0xf0 0xfb500000 0x0 0x00100000>,
+                <0xf0 0xfb030a00 0x0 0x00000040>;
+          reg-names = "torrent_phy", "dptx_phy";
+          resets = <&phyrst 0>;
+          clocks = <&ref_clk>;
+          clock-names = "refclk";
+          #address-cells = <1>;
+          #size-cells = <0>;
+          torrent_phy_dp: phy@0 {
+                    reg = <0>;
+                    resets = <&phyrst 1>, <&phyrst 2>,
+                             <&phyrst 3>, <&phyrst 4>;
+                    #phy-cells = <0>;
+                    cdns,phy-type = <PHY_TYPE_DP>;
+                    cdns,num-lanes = <4>;
+                    cdns,max-bit-rate = <8100>;
+          };
+    };
+...

Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt

@@ -13,10 +13,16 @@ Required properties (controller (parent) node):
 		  "mediatek,mt8173-u3phy";
 		  make use of "mediatek,generic-tphy-v1" on mt2701 instead and
 		  "mediatek,generic-tphy-v2" on mt2712 instead.
- - clocks	: (deprecated, use port's clocks instead) a list of phandle +
+
-		  clock-specifier pairs, one for each entry in clock-names
+- #address-cells:	the number of cells used to represent physical
- - clock-names	: (deprecated, use port's one instead) must contain
+		base addresses.
-		  "u3phya_ref": for reference clock of usb3.0 analog phy.
+- #size-cells:	the number of cells used to represent the size of an address.
+- ranges:	the address mapping relationship to the parent, defined with
+		- empty value: if optional 'reg' is used.
+		- non-empty value: if optional 'reg' is not used. should set
+			the child's base address to 0, the physical address
+			within parent's address space, and the length of
+			the address map.
 
 Required nodes	: a sub-node is required for each port the controller
 		  provides. Address range information including the usual
@@ -34,12 +40,6 @@ Optional properties (controller (parent) node):
 
 Required properties (port (child) node):
 - reg		: address and length of the register set for the port.
-- clocks	: a list of phandle + clock-specifier pairs, one for each
-		  entry in clock-names
-- clock-names	: must contain
-		  "ref": 48M reference clock for HighSpeed analog phy; and 26M
-			reference clock for SuperSpeed analog phy, sometimes is
-			24M, 25M or 27M, depended on platform.
 - #phy-cells	: should be 1 (See second example)
 		  cell after port phandle is phy type from:
 			- PHY_TYPE_USB2
@@ -48,10 +48,22 @@ Required properties (port (child) node):
 			- PHY_TYPE_SATA
 
 Optional properties (PHY_TYPE_USB2 port (child) node):
+- clocks	: a list of phandle + clock-specifier pairs, one for each
+		  entry in clock-names
+- clock-names	: may contain
+		  "ref": 48M reference clock for HighSpeed (digital) phy; and 26M
+			reference clock for SuperSpeed (digital) phy, sometimes is
+			24M, 25M or 27M, depended on platform.
+		  "da_ref": the reference clock of analog phy, used if the clocks
+			of analog and digital phys are separated, otherwise uses
+			"ref" clock only if needed.
+
 - mediatek,eye-src	: u32, the value of slew rate calibrate
 - mediatek,eye-vrt	: u32, the selection of VRT reference voltage
 - mediatek,eye-term	: u32, the selection of HS_TX TERM reference voltage
 - mediatek,bc12	: bool, enable BC12 of u2phy if support it
+- mediatek,discth	: u32, the selection of disconnect threshold
+- mediatek,intr	: u32, the selection of internal R (resistance)
 
 Example:
 

Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml

@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,qusb2-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm QUSB2 phy controller
+
+maintainers:
+  - Manu Gautam <mgautam@codeaurora.org>
+
+description:
+  QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - qcom,msm8996-qusb2-phy
+          - qcom,msm8998-qusb2-phy
+      - items:
+        - enum:
+          - qcom,sc7180-qusb2-phy
+          - qcom,sdm845-qusb2-phy
+        - const: qcom,qusb2-v2-phy
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+    items:
+      - description: phy config clock
+      - description: 19.2 MHz ref clk
+      - description: phy interface clock (Optional)
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+    items:
+      - const: cfg_ahb
+      - const: ref
+      - const: iface
+
+  vdda-pll-supply:
+     description:
+       Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+  vdda-phy-dpdm-supply:
+     description:
+       Phandle to 3.1V regulator supply to Dp/Dm port signals.
+
+  resets:
+    maxItems: 1
+    description:
+      Phandle to reset to phy block.
+
+  nvmem-cells:
+    maxItems: 1
+    description:
+        Phandle to nvmem cell that contains 'HS Tx trim'
+        tuning parameter value for qusb2 phy.
+
+  qcom,tcsr-syscon:
+    description:
+        Phandle to TCSR syscon register region.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: qcom,qusb2-v2-phy
+then:
+  properties:
+    qcom,imp-res-offset-value:
+      description:
+        It is a 6 bit value that specifies offset to be
+        added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY
+        tuning parameter that may vary for different boards of same SOC.
+      allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32
+        - minimum: 0
+          maximum: 63
+          default: 0
+
+    qcom,bias-ctrl-value:
+      description:
+        It is a 6 bit value that specifies bias-ctrl-value. It is a PHY
+        tuning parameter that may vary for different boards of same SOC.
+      allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32
+        - minimum: 0
+          maximum: 63
+          default: 0
+
+    qcom,charge-ctrl-value:
+     description:
+        It is a 2 bit value that specifies charge-ctrl-value. It is a PHY
+        tuning parameter that may vary for different boards of same SOC.
+     allOf:
+       - $ref: /schemas/types.yaml#/definitions/uint32
+       - minimum: 0
+         maximum: 3
+         default: 0
+
+    qcom,hstx-trim-value:
+      description:
+        It is a 4 bit value that specifies tuning for HSTX
+        output current.
+        Possible range is - 15mA to 24mA (stepsize of 600 uA).
+        See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+      allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32
+        - minimum: 0
+          maximum: 15
+          default: 3
+
+    qcom,preemphasis-level:
+      description:
+        It is a 2 bit value that specifies pre-emphasis level.
+        Possible range is 0 to 15% (stepsize of 5%).
+        See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+      allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32
+        - minimum: 0
+          maximum: 3
+          default: 2
+
+    qcom,preemphasis-width:
+      description:
+        It is a 1 bit value that specifies how long the HSTX
+        pre-emphasis (specified using qcom,preemphasis-level) must be in
+        effect. Duration could be half-bit of full-bit.
+        See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+      allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32
+        - minimum: 0
+          maximum: 1
+          default: 0
+
+    qcom,hsdisc-trim-value:
+      description:
+        It is a 2 bit value tuning parameter that control disconnect
+        threshold and may vary for different boards of same SOC.
+      allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32
+        - minimum: 0
+          maximum: 3
+          default: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - vdda-pll-supply
+  - vdda-phy-dpdm-supply
+  - resets
+
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    hsusb_phy: phy@7411000 {
+        compatible = "qcom,msm8996-qusb2-phy";
+        reg = <0x7411000 0x180>;
+        #phy-cells = <0>;
+
+        clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+                 <&gcc GCC_RX1_USB2_CLKREF_CLK>;
+        clock-names = "cfg_ahb", "ref";
+
+        vdda-pll-supply = <&pm8994_l12>;
+        vdda-phy-dpdm-supply = <&pm8994_l24>;
+
+        resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+        nvmem-cells = <&qusb2p_hstx_trim>;
+    };

Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml

@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,usb-hs-28nm.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Synopsys DesignWare Core 28nm High-Speed PHY
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  Qualcomm Low-Speed, Full-Speed, Hi-Speed 28nm USB PHY
+
+properties:
+  compatible:
+    enum:
+      - qcom,usb-hs-28nm-femtophy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: rpmcc ref clock
+      - description: PHY AHB clock
+      - description: Rentention clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: ahb
+      - const: sleep
+
+  resets:
+    items:
+      - description: PHY core reset
+      - description: POR reset
+
+  reset-names:
+    items:
+      - const: phy
+      - const: por
+
+  vdd-supply:
+    description: phandle to the regulator VDD supply node.
+
+  vdda1p8-supply:
+    description: phandle to the regulator 1.8V supply node.
+
+  vdda3p3-supply:
+    description: phandle to the regulator 3.3V supply node.
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdd-supply
+  - vdda1p8-supply
+  - vdda3p3-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    usb2_phy_prim: phy@7a000 {
+        compatible = "qcom,usb-hs-28nm-femtophy";
+        reg = <0x0007a000 0x200>;
+        #phy-cells = <0>;
+        clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+                 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+                 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+        clock-names = "ref", "ahb", "sleep";
+        resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>,
+                 <&gcc GCC_USB2A_PHY_BCR>;
+        reset-names = "phy", "por";
+        vdd-supply = <&vreg_l4_1p2>;
+        vdda1p8-supply = <&vreg_l5_1p8>;
+        vdda3p3-supply = <&vreg_l12_3p3>;
+    };
+...

Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml

@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,usb-ss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY
+
+properties:
+  compatible:
+    enum:
+      - qcom,usb-ss-28nm-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: rpmcc clock
+      - description: PHY AHB clock
+      - description: SuperSpeed pipe clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: ahb
+      - const: pipe
+
+  vdd-supply:
+    description: phandle to the regulator VDD supply node.
+
+  vdda1p8-supply:
+    description: phandle to the regulator 1.8V supply node.
+
+  resets:
+    items:
+      - description: COM reset
+      - description: PHY reset line
+
+  reset-names:
+    items:
+      - const: com
+      - const: phy
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - vdd-supply
+  - vdda1p8-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    usb3_phy: usb3-phy@78000 {
+        compatible = "qcom,usb-ss-28nm-phy";
+        reg = <0x78000 0x400>;
+        #phy-cells = <0>;
+        clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+                 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+                 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+        clock-names = "ref", "ahb", "pipe";
+        resets = <&gcc GCC_USB3_PHY_BCR>,
+                 <&gcc GCC_USB3PHY_PHY_BCR>;
+        reset-names = "com", "phy";
+        vdd-supply = <&vreg_l3_1p05>;
+        vdda1p8-supply = <&vreg_l5_1p8>;
+    };
+...

Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt

@@ -1,37 +0,0 @@
-Qualcomm DWC3 HS AND SS PHY CONTROLLER
---------------------------------------
-
-DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer
-controllers.  Each DWC3 PHY controller should have its own node.
-
-Required properties:
-- compatible: should contain one of the following:
-	- "qcom,dwc3-hs-usb-phy" for High Speed Synopsis PHY controller
-	- "qcom,dwc3-ss-usb-phy" for Super Speed Synopsis PHY controller
-- reg: offset and length of the DWC3 PHY controller register set
-- #phy-cells: must be zero
-- clocks: a list of phandles and clock-specifier pairs, one for each entry in
-  clock-names.
-- clock-names: Should contain "ref" for the PHY reference clock
-
-Optional clocks:
-  "xo"		External reference clock
-
-Example:
-		phy@100f8800 {
-			compatible = "qcom,dwc3-hs-usb-phy";
-			reg = <0x100f8800 0x30>;
-			clocks = <&gcc USB30_0_UTMI_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-		};
-
-		phy@100f8830 {
-			compatible = "qcom,dwc3-ss-usb-phy";
-			reg = <0x100f8830 0x30>;
-			clocks = <&gcc USB30_0_MASTER_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-		};

Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt

@@ -8,10 +8,13 @@ Required properties:
  - compatible: compatible list, contains:
 	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
 	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
+	       "qcom,msm8996-qmp-ufs-phy" for 14nm UFS phy on msm8996,
 	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
 	       "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
 	       "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998,
 	       "qcom,msm8998-qmp-pcie-phy" for PCIe QMP phy on msm8998,
+	       "qcom,sdm845-qhp-pcie-phy" for QHP PCIe phy on sdm845,
+	       "qcom,sdm845-qmp-pcie-phy" for QMP PCIe phy on sdm845,
 	       "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
 	       "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
 	       "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845,
@@ -44,6 +47,8 @@ Required properties:
 		For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
 			"aux", "cfg_ahb", "ref".
+		For "qcom,msm8996-qmp-ufs-phy" must contain:
+			"ref".
 		For "qcom,msm8996-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref".
 		For "qcom,msm8998-qmp-usb3-phy" must contain:
@@ -52,6 +57,10 @@ Required properties:
 			"ref", "ref_aux".
 		For "qcom,msm8998-qmp-pcie-phy" must contain:
 			"aux", "cfg_ahb", "ref".
+		For "qcom,sdm845-qhp-pcie-phy" must contain:
+			"aux", "cfg_ahb", "ref", "refgen".
+		For "qcom,sdm845-qmp-pcie-phy" must contain:
+			"aux", "cfg_ahb", "ref", "refgen".
 		For "qcom,sdm845-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref", "com_aux".
 		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
@@ -72,6 +81,8 @@ Required properties:
 			"phy", "common".
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
 			"phy", "common", "cfg".
+		For "qcom,msm8996-qmp-ufs-phy": must contain:
+			"ufsphy".
 		For "qcom,msm8996-qmp-usb3-phy" must contain
 			"phy", "common".
 		For "qcom,msm8998-qmp-usb3-phy" must contain
@@ -80,6 +91,10 @@ Required properties:
 			"ufsphy".
 		For "qcom,msm8998-qmp-pcie-phy" must contain:
 			"phy", "common".
+		For "qcom,sdm845-qhp-pcie-phy" must contain:
+			"phy".
+		For "qcom,sdm845-qmp-pcie-phy" must contain:
+			"phy".
 		For "qcom,sdm845-qmp-usb3-phy" must contain:
 			"phy", "common".
 		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:

Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt

@@ -1,68 +0,0 @@
-Qualcomm QUSB2 phy controller
-=============================
-
-QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
-
-Required properties:
- - compatible: compatible list, contains
-	       "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
-	       "qcom,msm8998-qusb2-phy" for 10nm PHY on msm8998,
-	       "qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845.
-
- - reg: offset and length of the PHY register set.
- - #phy-cells: must be 0.
-
- - clocks: a list of phandles and clock-specifier pairs,
-	   one for each entry in clock-names.
- - clock-names: must be "cfg_ahb" for phy config clock,
-			"ref" for 19.2 MHz ref clk,
-			"iface" for phy interface clock (Optional).
-
- - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
- - vdda-phy-dpdm-supply: Phandle to 3.1V regulator supply to Dp/Dm port signals.
-
- - resets: Phandle to reset to phy block.
-
-Optional properties:
- - nvmem-cells: Phandle to nvmem cell that contains 'HS Tx trim'
-		tuning parameter value for qusb2 phy.
-
- - qcom,tcsr-syscon: Phandle to TCSR syscon register region.
- - qcom,imp-res-offset-value: It is a 6 bit value that specifies offset to be
-		added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY
-		tuning parameter that may vary for different boards of same SOC.
-		This property is applicable to only QUSB2 v2 PHY (sdm845).
- - qcom,hstx-trim-value: It is a 4 bit value that specifies tuning for HSTX
-		output current.
-		Possible range is - 15mA to 24mA (stepsize of 600 uA).
-		See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
-		This property is applicable to only QUSB2 v2 PHY (sdm845).
-		Default value is 22.2mA for sdm845.
- - qcom,preemphasis-level: It is a 2 bit value that specifies pre-emphasis level.
-		Possible range is 0 to 15% (stepsize of 5%).
-		See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
-		This property is applicable to only QUSB2 v2 PHY (sdm845).
-		Default value is 10% for sdm845.
-- qcom,preemphasis-width: It is a 1 bit value that specifies how long the HSTX
-		pre-emphasis (specified using qcom,preemphasis-level) must be in
-		effect. Duration could be half-bit of full-bit.
-		See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
-		This property is applicable to only QUSB2 v2 PHY (sdm845).
-		Default value is full-bit width for sdm845.
-
-Example:
-	hsusb_phy: phy@7411000 {
-		compatible = "qcom,msm8996-qusb2-phy";
-		reg = <0x7411000 0x180>;
-		#phy-cells = <0>;
-
-		clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-			<&gcc GCC_RX1_USB2_CLKREF_CLK>,
-		clock-names = "cfg_ahb", "ref";
-
-		vdda-pll-supply = <&pm8994_l12>;
-		vdda-phy-dpdm-supply = <&pm8994_l24>;
-
-		resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
-		nvmem-cells = <&qusb2p_hstx_trim>;
-        };

Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt

@@ -40,6 +40,7 @@ Required properties:
 			  "ti,dra7xx-phy-gmii-sel" for dra7xx/am57xx platform
 			  "ti,am43xx-phy-gmii-sel" for am43xx platform
 			  "ti,dm814-phy-gmii-sel" for dm814x platform
+			  "ti,am654-phy-gmii-sel" for AM654x/J721E platform
 - reg			: Address and length of the register set for the device
 - #phy-cells		: must be 2.
 			  cell 1 - CPSW port number (starting from 1)

Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt

@@ -5,14 +5,19 @@ PCIe controller implemented on Socionext UniPhier SoCs.
 
 Required properties:
 - compatible: Should contain one of the following:
+    "socionext,uniphier-pro5-pcie-phy" - for Pro5 PHY
     "socionext,uniphier-ld20-pcie-phy" - for LD20 PHY
     "socionext,uniphier-pxs3-pcie-phy" - for PXs3 PHY
 - reg: Specifies offset and length of the register set for the device.
 - #phy-cells: Must be zero.
-- clocks: A phandle to the clock gate for PCIe glue layer including
+- clocks: A list of phandles to the clock gate for PCIe glue layer
-	this phy.
+	including this phy.
-- resets: A phandle to the reset line for PCIe glue layer including
+- clock-names: For Pro5 only, should contain the following:
-	this phy.
+    "gio", "link" - for Pro5 SoC
+- resets: A list of phandles to the reset line for PCIe glue layer
+	including this phy.
+- reset-names: For Pro5 only, should contain the following:
+    "gio", "link" - for Pro5 SoC
 
 Optional properties:
 - socionext,syscon: A phandle to system control to set configurations

Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt

@@ -7,7 +7,7 @@ this describes about High-Speed PHY.
 
 Required properties:
 - compatible: Should contain one of the following:
-    "socionext,uniphier-pro4-usb3-hsphy" - for Pro4 SoC
+    "socionext,uniphier-pro5-usb3-hsphy" - for Pro5 SoC
     "socionext,uniphier-pxs2-usb3-hsphy" - for PXs2 SoC
     "socionext,uniphier-ld20-usb3-hsphy" - for LD20 SoC
     "socionext,uniphier-pxs3-usb3-hsphy" - for PXs3 SoC
@@ -16,13 +16,13 @@ Required properties:
 - clocks: A list of phandles to the clock gate for USB3 glue layer.
 	According to the clock-names, appropriate clocks are required.
 - clock-names: Should contain the following:
-    "gio", "link" - for Pro4 SoC
+    "gio", "link" - for Pro5 SoC
     "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional.
     "phy", "link" - for others
 - resets: A list of phandles to the reset control for USB3 glue layer.
 	According to the reset-names, appropriate resets are required.
 - reset-names: Should contain the following:
-    "gio", "link" - for Pro4 SoC
+    "gio", "link" - for Pro5 SoC
     "phy", "link" - for others
 
 Optional properties:

Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt

@@ -8,6 +8,7 @@ this describes about Super-Speed PHY.
 Required properties:
 - compatible: Should contain one of the following:
     "socionext,uniphier-pro4-usb3-ssphy" - for Pro4 SoC
+    "socionext,uniphier-pro5-usb3-ssphy" - for Pro5 SoC
     "socionext,uniphier-pxs2-usb3-ssphy" - for PXs2 SoC
     "socionext,uniphier-ld20-usb3-ssphy" - for LD20 SoC
     "socionext,uniphier-pxs3-usb3-ssphy" - for PXs3 SoC
@@ -16,13 +17,13 @@ Required properties:
 - clocks: A list of phandles to the clock gate for USB3 glue layer.
 	According to the clock-names, appropriate clocks are required.
 - clock-names:
-    "gio", "link" - for Pro4 SoC
+    "gio", "link" - for Pro4 and Pro5 SoC
     "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional.
     "phy", "link" - for others
 - resets: A list of phandles to the reset control for USB3 glue layer.
 	According to the reset-names, appropriate resets are required.
 - reset-names:
-    "gio", "link" - for Pro4 SoC
+    "gio", "link" - for Pro4 and Pro5 SoC
     "phy", "link" - for others
 
 Optional properties:

drivers/phy/amlogic/phy-meson-g12a-usb2.c

@@ -66,7 +66,7 @@
 #define PHY_CTRL_R14						0x38
 	#define PHY_CTRL_R14_I_RDP_EN				BIT(0)
 	#define PHY_CTRL_R14_I_RPU_SW1_EN			BIT(1)
-	#define PHY_CTRL_R14_I_RPU_SW2_EN			GENMASK(2, 3)
+	#define PHY_CTRL_R14_I_RPU_SW2_EN			GENMASK(3, 2)
 	#define PHY_CTRL_R14_PG_RSTN				BIT(4)
 	#define PHY_CTRL_R14_I_C2L_DATA_16_8			BIT(5)
 	#define PHY_CTRL_R14_I_C2L_ASSERT_SINGLE_EN_ZERO	BIT(6)
@@ -146,11 +146,17 @@
 #define RESET_COMPLETE_TIME					1000
 #define PLL_RESET_COMPLETE_TIME					100
 
+enum meson_soc_id {
+	MESON_SOC_G12A  = 0,
+	MESON_SOC_A1,
+};
+
 struct phy_meson_g12a_usb2_priv {
 	struct device		*dev;
 	struct regmap		*regmap;
 	struct clk		*clk;
 	struct reset_control	*reset;
+	int                     soc_id;
 };
 
 static const struct regmap_config phy_meson_g12a_usb2_regmap_conf = {
@@ -164,6 +170,7 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
 {
 	struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy);
 	int ret;
+	unsigned int value;
 
 	ret = reset_control_reset(priv->reset);
 	if (ret)
@@ -192,18 +199,22 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
 		     FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT2, 2) |
 		     FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT1, 9));
 
-	regmap_write(priv->regmap, PHY_CTRL_R18,
+	value = FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL, 1) |
-		     FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL, 1) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_LK_W, 9) |
-		     FIELD_PREP(PHY_CTRL_R18_MPLL_LK_W, 9) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_LK_S, 0x27) |
-		     FIELD_PREP(PHY_CTRL_R18_MPLL_LK_S, 0x27) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_PFD_GAIN, 1) |
-		     FIELD_PREP(PHY_CTRL_R18_MPLL_PFD_GAIN, 1) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_ROU, 7) |
-		     FIELD_PREP(PHY_CTRL_R18_MPLL_ROU, 7) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_DATA_SEL, 3) |
-		     FIELD_PREP(PHY_CTRL_R18_MPLL_DATA_SEL, 3) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_BIAS_ADJ, 1) |
-		     FIELD_PREP(PHY_CTRL_R18_MPLL_BIAS_ADJ, 1) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_BB_MODE, 0) |
-		     FIELD_PREP(PHY_CTRL_R18_MPLL_BB_MODE, 0) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_ALPHA, 3) |
-		     FIELD_PREP(PHY_CTRL_R18_MPLL_ALPHA, 3) |
+		FIELD_PREP(PHY_CTRL_R18_MPLL_ADJ_LDO, 1) |
-		     FIELD_PREP(PHY_CTRL_R18_MPLL_ADJ_LDO, 1) |
+		PHY_CTRL_R18_MPLL_ACG_RANGE;
-		     PHY_CTRL_R18_MPLL_ACG_RANGE);
+
+	if (priv->soc_id == MESON_SOC_A1)
+		value |= PHY_CTRL_R18_MPLL_DCO_CLK_SEL;
+
+	regmap_write(priv->regmap, PHY_CTRL_R18, value);
 
 	udelay(PLL_RESET_COMPLETE_TIME);
 
@@ -227,13 +238,24 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
 		     FIELD_PREP(PHY_CTRL_R20_USB2_BGR_VREF_4_0, 0) |
 		     FIELD_PREP(PHY_CTRL_R20_USB2_BGR_DBG_1_0, 0));
 
-	regmap_write(priv->regmap, PHY_CTRL_R4,
+	if (priv->soc_id == MESON_SOC_G12A)
-		     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0, 0xf) |
+		regmap_write(priv->regmap, PHY_CTRL_R4,
-		     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8, 0xf) |
+			     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0, 0xf) |
-		     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16, 0xf) |
+			     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8, 0xf) |
-		     PHY_CTRL_R4_TEST_BYPASS_MODE_EN |
+			     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16, 0xf) |
-		     FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0, 0) |
+			     PHY_CTRL_R4_TEST_BYPASS_MODE_EN |
-		     FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2, 0));
+			     FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0, 0) |
+			     FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2, 0));
+	else if (priv->soc_id == MESON_SOC_A1) {
+		regmap_write(priv->regmap, PHY_CTRL_R21,
+			     PHY_CTRL_R21_USB2_CAL_ACK_EN |
+			     PHY_CTRL_R21_USB2_TX_STRG_PD |
+			     FIELD_PREP(PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0, 2));
+
+		/* Analog Settings */
+		regmap_write(priv->regmap, PHY_CTRL_R13,
+			     FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
+	}
 
 	/* Tuning Disconnect Threshold */
 	regmap_write(priv->regmap, PHY_CTRL_R3,
@@ -241,11 +263,13 @@ static int phy_meson_g12a_usb2_init(struct phy *phy)
 		     FIELD_PREP(PHY_CTRL_R3_HSDIC_REF, 1) |
 		     FIELD_PREP(PHY_CTRL_R3_DISC_THRESH, 3));
 
-	/* Analog Settings */
+	if (priv->soc_id == MESON_SOC_G12A) {
-	regmap_write(priv->regmap, PHY_CTRL_R14, 0);
+		/* Analog Settings */
-	regmap_write(priv->regmap, PHY_CTRL_R13,
+		regmap_write(priv->regmap, PHY_CTRL_R14, 0);
-		     PHY_CTRL_R13_UPDATE_PMA_SIGNALS |
+		regmap_write(priv->regmap, PHY_CTRL_R13,
-		     FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
+			     PHY_CTRL_R13_UPDATE_PMA_SIGNALS |
+			     FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
+	}
 
 	return 0;
 }
@@ -286,6 +310,8 @@ static int phy_meson_g12a_usb2_probe(struct platform_device *pdev)
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
+	priv->soc_id = (enum meson_soc_id)of_device_get_match_data(&pdev->dev);
+
 	priv->regmap = devm_regmap_init_mmio(dev, base,
 					     &phy_meson_g12a_usb2_regmap_conf);
 	if (IS_ERR(priv->regmap))
@@ -321,8 +347,15 @@ static int phy_meson_g12a_usb2_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id phy_meson_g12a_usb2_of_match[] = {
-	{ .compatible = "amlogic,g12a-usb2-phy", },
+	{
-	{ },
+		.compatible = "amlogic,g12a-usb2-phy",
+		.data = (void *)MESON_SOC_G12A,
+	},
+	{
+		.compatible = "amlogic,a1-usb2-phy",
+		.data = (void *)MESON_SOC_A1,
+	},
+	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, phy_meson_g12a_usb2_of_match);
 

drivers/phy/cadence/Kconfig

@@ -3,13 +3,13 @@
 # Phy drivers for Cadence PHYs
 #
 
-config PHY_CADENCE_DP
+config PHY_CADENCE_TORRENT
-	tristate "Cadence MHDP DisplayPort PHY driver"
+	tristate "Cadence Torrent PHY driver"
 	depends on OF
 	depends on HAS_IOMEM
 	select GENERIC_PHY
 	help
-	  Support for Cadence MHDP DisplayPort PHY.
+	  Support for Cadence Torrent PHY.
 
 config PHY_CADENCE_DPHY
 	tristate "Cadence D-PHY Support"

drivers/phy/cadence/Makefile

@@ -1,4 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_PHY_CADENCE_DP)	+= phy-cadence-dp.o
+obj-$(CONFIG_PHY_CADENCE_TORRENT)	+= phy-cadence-torrent.o
 obj-$(CONFIG_PHY_CADENCE_DPHY)	+= cdns-dphy.o
 obj-$(CONFIG_PHY_CADENCE_SIERRA)	+= phy-cadence-sierra.o

drivers/phy/cadence/phy-cadence-dp.c

@@ -1,541 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Cadence MHDP DisplayPort SD0801 PHY driver.
- *
- * Copyright 2018 Cadence Design Systems, Inc.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/iopoll.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/phy/phy.h>
-#include <linux/platform_device.h>
-
-#define DEFAULT_NUM_LANES	2
-#define MAX_NUM_LANES		4
-#define DEFAULT_MAX_BIT_RATE	8100 /* in Mbps */
-
-#define POLL_TIMEOUT_US		2000
-#define LANE_MASK		0x7
-
-/*
- * register offsets from DPTX PHY register block base (i.e MHDP
- * register base + 0x30a00)
- */
-#define PHY_AUX_CONFIG			0x00
-#define PHY_AUX_CTRL			0x04
-#define PHY_RESET			0x20
-#define PHY_PMA_XCVR_PLLCLK_EN		0x24
-#define PHY_PMA_XCVR_PLLCLK_EN_ACK	0x28
-#define PHY_PMA_XCVR_POWER_STATE_REQ	0x2c
-#define PHY_POWER_STATE_LN_0	0x0000
-#define PHY_POWER_STATE_LN_1	0x0008
-#define PHY_POWER_STATE_LN_2	0x0010
-#define PHY_POWER_STATE_LN_3	0x0018
-#define PHY_PMA_XCVR_POWER_STATE_ACK	0x30
-#define PHY_PMA_CMN_READY		0x34
-#define PHY_PMA_XCVR_TX_VMARGIN		0x38
-#define PHY_PMA_XCVR_TX_DEEMPH		0x3c
-
-/*
- * register offsets from SD0801 PHY register block base (i.e MHDP
- * register base + 0x500000)
- */
-#define CMN_SSM_BANDGAP_TMR		0x00084
-#define CMN_SSM_BIAS_TMR		0x00088
-#define CMN_PLLSM0_PLLPRE_TMR		0x000a8
-#define CMN_PLLSM0_PLLLOCK_TMR		0x000b0
-#define CMN_PLLSM1_PLLPRE_TMR		0x000c8
-#define CMN_PLLSM1_PLLLOCK_TMR		0x000d0
-#define CMN_BGCAL_INIT_TMR		0x00190
-#define CMN_BGCAL_ITER_TMR		0x00194
-#define CMN_IBCAL_INIT_TMR		0x001d0
-#define CMN_PLL0_VCOCAL_INIT_TMR	0x00210
-#define CMN_PLL0_VCOCAL_ITER_TMR	0x00214
-#define CMN_PLL0_VCOCAL_REFTIM_START	0x00218
-#define CMN_PLL0_VCOCAL_PLLCNT_START	0x00220
-#define CMN_PLL0_INTDIV_M0		0x00240
-#define CMN_PLL0_FRACDIVL_M0		0x00244
-#define CMN_PLL0_FRACDIVH_M0		0x00248
-#define CMN_PLL0_HIGH_THR_M0		0x0024c
-#define CMN_PLL0_DSM_DIAG_M0		0x00250
-#define CMN_PLL0_LOCK_PLLCNT_START	0x00278
-#define CMN_PLL1_VCOCAL_INIT_TMR	0x00310
-#define CMN_PLL1_VCOCAL_ITER_TMR	0x00314
-#define CMN_PLL1_DSM_DIAG_M0		0x00350
-#define CMN_TXPUCAL_INIT_TMR		0x00410
-#define CMN_TXPUCAL_ITER_TMR		0x00414
-#define CMN_TXPDCAL_INIT_TMR		0x00430
-#define CMN_TXPDCAL_ITER_TMR		0x00434
-#define CMN_RXCAL_INIT_TMR		0x00450
-#define CMN_RXCAL_ITER_TMR		0x00454
-#define CMN_SD_CAL_INIT_TMR		0x00490
-#define CMN_SD_CAL_ITER_TMR		0x00494
-#define CMN_SD_CAL_REFTIM_START		0x00498
-#define CMN_SD_CAL_PLLCNT_START		0x004a0
-#define CMN_PDIAG_PLL0_CTRL_M0		0x00680
-#define CMN_PDIAG_PLL0_CLK_SEL_M0	0x00684
-#define CMN_PDIAG_PLL0_CP_PADJ_M0	0x00690
-#define CMN_PDIAG_PLL0_CP_IADJ_M0	0x00694
-#define CMN_PDIAG_PLL0_FILT_PADJ_M0	0x00698
-#define CMN_PDIAG_PLL0_CP_PADJ_M1	0x006d0
-#define CMN_PDIAG_PLL0_CP_IADJ_M1	0x006d4
-#define CMN_PDIAG_PLL1_CLK_SEL_M0	0x00704
-#define XCVR_DIAG_PLLDRC_CTRL		0x10394
-#define XCVR_DIAG_HSCLK_SEL		0x10398
-#define XCVR_DIAG_HSCLK_DIV		0x1039c
-#define TX_PSC_A0			0x10400
-#define TX_PSC_A1			0x10404
-#define TX_PSC_A2			0x10408
-#define TX_PSC_A3			0x1040c
-#define RX_PSC_A0			0x20000
-#define RX_PSC_A1			0x20004
-#define RX_PSC_A2			0x20008
-#define RX_PSC_A3			0x2000c
-#define PHY_PLL_CFG			0x30038
-
-struct cdns_dp_phy {
-	void __iomem *base;	/* DPTX registers base */
-	void __iomem *sd_base; /* SD0801 registers base */
-	u32 num_lanes; /* Number of lanes to use */
-	u32 max_bit_rate; /* Maximum link bit rate to use (in Mbps) */
-	struct device *dev;
-};
-
-static int cdns_dp_phy_init(struct phy *phy);
-static void cdns_dp_phy_run(struct cdns_dp_phy *cdns_phy);
-static void cdns_dp_phy_wait_pma_cmn_ready(struct cdns_dp_phy *cdns_phy);
-static void cdns_dp_phy_pma_cfg(struct cdns_dp_phy *cdns_phy);
-static void cdns_dp_phy_pma_cmn_cfg_25mhz(struct cdns_dp_phy *cdns_phy);
-static void cdns_dp_phy_pma_lane_cfg(struct cdns_dp_phy *cdns_phy,
-					 unsigned int lane);
-static void cdns_dp_phy_pma_cmn_vco_cfg_25mhz(struct cdns_dp_phy *cdns_phy);
-static void cdns_dp_phy_pma_cmn_rate(struct cdns_dp_phy *cdns_phy);
-static void cdns_dp_phy_write_field(struct cdns_dp_phy *cdns_phy,
-					unsigned int offset,
-					unsigned char start_bit,
-					unsigned char num_bits,
-					unsigned int val);
-
-static const struct phy_ops cdns_dp_phy_ops = {
-	.init		= cdns_dp_phy_init,
-	.owner		= THIS_MODULE,
-};
-
-static int cdns_dp_phy_init(struct phy *phy)
-{
-	unsigned char lane_bits;
-
-	struct cdns_dp_phy *cdns_phy = phy_get_drvdata(phy);
-
-	writel(0x0003, cdns_phy->base + PHY_AUX_CTRL); /* enable AUX */
-
-	/* PHY PMA registers configuration function */
-	cdns_dp_phy_pma_cfg(cdns_phy);
-
-	/*
-	 * Set lines power state to A0
-	 * Set lines pll clk enable to 0
-	 */
-
-	cdns_dp_phy_write_field(cdns_phy, PHY_PMA_XCVR_POWER_STATE_REQ,
-				PHY_POWER_STATE_LN_0, 6, 0x0000);
-
-	if (cdns_phy->num_lanes >= 2) {
-		cdns_dp_phy_write_field(cdns_phy,
-					PHY_PMA_XCVR_POWER_STATE_REQ,
-					PHY_POWER_STATE_LN_1, 6, 0x0000);
-
-		if (cdns_phy->num_lanes == 4) {
-			cdns_dp_phy_write_field(cdns_phy,
-						PHY_PMA_XCVR_POWER_STATE_REQ,
-						PHY_POWER_STATE_LN_2, 6, 0);
-			cdns_dp_phy_write_field(cdns_phy,
-						PHY_PMA_XCVR_POWER_STATE_REQ,
-						PHY_POWER_STATE_LN_3, 6, 0);
-		}
-	}
-
-	cdns_dp_phy_write_field(cdns_phy, PHY_PMA_XCVR_PLLCLK_EN,
-				0, 1, 0x0000);
-
-	if (cdns_phy->num_lanes >= 2) {
-		cdns_dp_phy_write_field(cdns_phy, PHY_PMA_XCVR_PLLCLK_EN,
-					1, 1, 0x0000);
-		if (cdns_phy->num_lanes == 4) {
-			cdns_dp_phy_write_field(cdns_phy,
-						PHY_PMA_XCVR_PLLCLK_EN,
-						2, 1, 0x0000);
-			cdns_dp_phy_write_field(cdns_phy,
-						PHY_PMA_XCVR_PLLCLK_EN,
-						3, 1, 0x0000);
-		}
-	}
-
-	/*
-	 * release phy_l0*_reset_n and pma_tx_elec_idle_ln_* based on
-	 * used lanes
-	 */
-	lane_bits = (1 << cdns_phy->num_lanes) - 1;
-	writel(((0xF & ~lane_bits) << 4) | (0xF & lane_bits),
-		   cdns_phy->base + PHY_RESET);
-
-	/* release pma_xcvr_pllclk_en_ln_*, only for the master lane */
-	writel(0x0001, cdns_phy->base + PHY_PMA_XCVR_PLLCLK_EN);
-
-	/* PHY PMA registers configuration functions */
-	cdns_dp_phy_pma_cmn_vco_cfg_25mhz(cdns_phy);
-	cdns_dp_phy_pma_cmn_rate(cdns_phy);
-
-	/* take out of reset */
-	cdns_dp_phy_write_field(cdns_phy, PHY_RESET, 8, 1, 1);
-	cdns_dp_phy_wait_pma_cmn_ready(cdns_phy);
-	cdns_dp_phy_run(cdns_phy);
-
-	return 0;
-}
-
-static void cdns_dp_phy_wait_pma_cmn_ready(struct cdns_dp_phy *cdns_phy)
-{
-	unsigned int reg;
-	int ret;
-
-	ret = readl_poll_timeout(cdns_phy->base + PHY_PMA_CMN_READY, reg,
-				 reg & 1, 0, 500);
-	if (ret == -ETIMEDOUT)
-		dev_err(cdns_phy->dev,
-			"timeout waiting for PMA common ready\n");
-}
-
-static void cdns_dp_phy_pma_cfg(struct cdns_dp_phy *cdns_phy)
-{
-	unsigned int i;
-
-	/* PMA common configuration */
-	cdns_dp_phy_pma_cmn_cfg_25mhz(cdns_phy);
-
-	/* PMA lane configuration to deal with multi-link operation */
-	for (i = 0; i < cdns_phy->num_lanes; i++)
-		cdns_dp_phy_pma_lane_cfg(cdns_phy, i);
-}
-
-static void cdns_dp_phy_pma_cmn_cfg_25mhz(struct cdns_dp_phy *cdns_phy)
-{
-	/* refclock registers - assumes 25 MHz refclock */
-	writel(0x0019, cdns_phy->sd_base + CMN_SSM_BIAS_TMR);
-	writel(0x0032, cdns_phy->sd_base + CMN_PLLSM0_PLLPRE_TMR);
-	writel(0x00D1, cdns_phy->sd_base + CMN_PLLSM0_PLLLOCK_TMR);
-	writel(0x0032, cdns_phy->sd_base + CMN_PLLSM1_PLLPRE_TMR);
-	writel(0x00D1, cdns_phy->sd_base + CMN_PLLSM1_PLLLOCK_TMR);
-	writel(0x007D, cdns_phy->sd_base + CMN_BGCAL_INIT_TMR);
-	writel(0x007D, cdns_phy->sd_base + CMN_BGCAL_ITER_TMR);
-	writel(0x0019, cdns_phy->sd_base + CMN_IBCAL_INIT_TMR);
-	writel(0x001E, cdns_phy->sd_base + CMN_TXPUCAL_INIT_TMR);
-	writel(0x0006, cdns_phy->sd_base + CMN_TXPUCAL_ITER_TMR);
-	writel(0x001E, cdns_phy->sd_base + CMN_TXPDCAL_INIT_TMR);
-	writel(0x0006, cdns_phy->sd_base + CMN_TXPDCAL_ITER_TMR);
-	writel(0x02EE, cdns_phy->sd_base + CMN_RXCAL_INIT_TMR);
-	writel(0x0006, cdns_phy->sd_base + CMN_RXCAL_ITER_TMR);
-	writel(0x0002, cdns_phy->sd_base + CMN_SD_CAL_INIT_TMR);
-	writel(0x0002, cdns_phy->sd_base + CMN_SD_CAL_ITER_TMR);
-	writel(0x000E, cdns_phy->sd_base + CMN_SD_CAL_REFTIM_START);
-	writel(0x012B, cdns_phy->sd_base + CMN_SD_CAL_PLLCNT_START);
-	/* PLL registers */
-	writel(0x0409, cdns_phy->sd_base + CMN_PDIAG_PLL0_CP_PADJ_M0);
-	writel(0x1001, cdns_phy->sd_base + CMN_PDIAG_PLL0_CP_IADJ_M0);
-	writel(0x0F08, cdns_phy->sd_base + CMN_PDIAG_PLL0_FILT_PADJ_M0);
-	writel(0x0004, cdns_phy->sd_base + CMN_PLL0_DSM_DIAG_M0);
-	writel(0x00FA, cdns_phy->sd_base + CMN_PLL0_VCOCAL_INIT_TMR);
-	writel(0x0004, cdns_phy->sd_base + CMN_PLL0_VCOCAL_ITER_TMR);
-	writel(0x00FA, cdns_phy->sd_base + CMN_PLL1_VCOCAL_INIT_TMR);
-	writel(0x0004, cdns_phy->sd_base + CMN_PLL1_VCOCAL_ITER_TMR);
-	writel(0x0318, cdns_phy->sd_base + CMN_PLL0_VCOCAL_REFTIM_START);
-}
-
-static void cdns_dp_phy_pma_cmn_vco_cfg_25mhz(struct cdns_dp_phy *cdns_phy)
-{
-	/* Assumes 25 MHz refclock */
-	switch (cdns_phy->max_bit_rate) {
-		/* Setting VCO for 10.8GHz */
-	case 2700:
-	case 5400:
-		writel(0x01B0, cdns_phy->sd_base + CMN_PLL0_INTDIV_M0);
-		writel(0x0000, cdns_phy->sd_base + CMN_PLL0_FRACDIVL_M0);
-		writel(0x0002, cdns_phy->sd_base + CMN_PLL0_FRACDIVH_M0);
-		writel(0x0120, cdns_phy->sd_base + CMN_PLL0_HIGH_THR_M0);
-		break;
-		/* Setting VCO for 9.72GHz */
-	case 2430:
-	case 3240:
-		writel(0x0184, cdns_phy->sd_base + CMN_PLL0_INTDIV_M0);
-		writel(0xCCCD, cdns_phy->sd_base + CMN_PLL0_FRACDIVL_M0);
-		writel(0x0002, cdns_phy->sd_base + CMN_PLL0_FRACDIVH_M0);
-		writel(0x0104, cdns_phy->sd_base + CMN_PLL0_HIGH_THR_M0);
-		break;
-		/* Setting VCO for 8.64GHz */
-	case 2160:
-	case 4320:
-		writel(0x0159, cdns_phy->sd_base + CMN_PLL0_INTDIV_M0);
-		writel(0x999A, cdns_phy->sd_base + CMN_PLL0_FRACDIVL_M0);
-		writel(0x0002, cdns_phy->sd_base + CMN_PLL0_FRACDIVH_M0);
-		writel(0x00E7, cdns_phy->sd_base + CMN_PLL0_HIGH_THR_M0);
-		break;
-		/* Setting VCO for 8.1GHz */
-	case 8100:
-		writel(0x0144, cdns_phy->sd_base + CMN_PLL0_INTDIV_M0);
-		writel(0x0000, cdns_phy->sd_base + CMN_PLL0_FRACDIVL_M0);
-		writel(0x0002, cdns_phy->sd_base + CMN_PLL0_FRACDIVH_M0);
-		writel(0x00D8, cdns_phy->sd_base + CMN_PLL0_HIGH_THR_M0);
-		break;
-	}
-
-	writel(0x0002, cdns_phy->sd_base + CMN_PDIAG_PLL0_CTRL_M0);
-	writel(0x0318, cdns_phy->sd_base + CMN_PLL0_VCOCAL_PLLCNT_START);
-}
-
-static void cdns_dp_phy_pma_cmn_rate(struct cdns_dp_phy *cdns_phy)
-{
-	unsigned int clk_sel_val = 0;
-	unsigned int hsclk_div_val = 0;
-	unsigned int i;
-
-	/* 16'h0000 for single DP link configuration */
-	writel(0x0000, cdns_phy->sd_base + PHY_PLL_CFG);
-
-	switch (cdns_phy->max_bit_rate) {
-	case 1620:
-		clk_sel_val = 0x0f01;
-		hsclk_div_val = 2;
-		break;
-	case 2160:
-	case 2430:
-	case 2700:
-		clk_sel_val = 0x0701;
-		 hsclk_div_val = 1;
-		break;
-	case 3240:
-		clk_sel_val = 0x0b00;
-		hsclk_div_val = 2;
-		break;
-	case 4320:
-	case 5400:
-		clk_sel_val = 0x0301;
-		hsclk_div_val = 0;
-		break;
-	case 8100:
-		clk_sel_val = 0x0200;
-		hsclk_div_val = 0;
-		break;
-	}
-
-	writel(clk_sel_val, cdns_phy->sd_base + CMN_PDIAG_PLL0_CLK_SEL_M0);
-
-	/* PMA lane configuration to deal with multi-link operation */
-	for (i = 0; i < cdns_phy->num_lanes; i++) {
-		writel(hsclk_div_val,
-		       cdns_phy->sd_base + (XCVR_DIAG_HSCLK_DIV | (i<<11)));
-	}
-}
-
-static void cdns_dp_phy_pma_lane_cfg(struct cdns_dp_phy *cdns_phy,
-				     unsigned int lane)
-{
-	unsigned int lane_bits = (lane & LANE_MASK) << 11;
-
-	/* Writing Tx/Rx Power State Controllers registers */
-	writel(0x00FB, cdns_phy->sd_base + (TX_PSC_A0 | lane_bits));
-	writel(0x04AA, cdns_phy->sd_base + (TX_PSC_A2 | lane_bits));
-	writel(0x04AA, cdns_phy->sd_base + (TX_PSC_A3 | lane_bits));
-	writel(0x0000, cdns_phy->sd_base + (RX_PSC_A0 | lane_bits));
-	writel(0x0000, cdns_phy->sd_base + (RX_PSC_A2 | lane_bits));
-	writel(0x0000, cdns_phy->sd_base + (RX_PSC_A3 | lane_bits));
-
-	writel(0x0001, cdns_phy->sd_base + (XCVR_DIAG_PLLDRC_CTRL | lane_bits));
-	writel(0x0000, cdns_phy->sd_base + (XCVR_DIAG_HSCLK_SEL | lane_bits));
-}
-
-static void cdns_dp_phy_run(struct cdns_dp_phy *cdns_phy)
-{
-	unsigned int read_val;
-	u32 write_val1 = 0;
-	u32 write_val2 = 0;
-	u32 mask = 0;
-	int ret;
-
-	/*
-	 * waiting for ACK of pma_xcvr_pllclk_en_ln_*, only for the
-	 * master lane
-	 */
-	ret = readl_poll_timeout(cdns_phy->base + PHY_PMA_XCVR_PLLCLK_EN_ACK,
-				 read_val, read_val & 1, 0, POLL_TIMEOUT_US);
-	if (ret == -ETIMEDOUT)
-		dev_err(cdns_phy->dev,
-			"timeout waiting for link PLL clock enable ack\n");
-
-	ndelay(100);
-
-	switch (cdns_phy->num_lanes) {
-
-	case 1:	/* lane 0 */
-		write_val1 = 0x00000004;
-		write_val2 = 0x00000001;
-		mask = 0x0000003f;
-		break;
-	case 2: /* lane 0-1 */
-		write_val1 = 0x00000404;
-		write_val2 = 0x00000101;
-		mask = 0x00003f3f;
-		break;
-	case 4: /* lane 0-3 */
-		write_val1 = 0x04040404;
-		write_val2 = 0x01010101;
-		mask = 0x3f3f3f3f;
-		break;
-	}
-
-	writel(write_val1, cdns_phy->base + PHY_PMA_XCVR_POWER_STATE_REQ);
-
-	ret = readl_poll_timeout(cdns_phy->base + PHY_PMA_XCVR_POWER_STATE_ACK,
-				 read_val, (read_val & mask) == write_val1, 0,
-				 POLL_TIMEOUT_US);
-	if (ret == -ETIMEDOUT)
-		dev_err(cdns_phy->dev,
-			"timeout waiting for link power state ack\n");
-
-	writel(0, cdns_phy->base + PHY_PMA_XCVR_POWER_STATE_REQ);
-	ndelay(100);
-
-	writel(write_val2, cdns_phy->base + PHY_PMA_XCVR_POWER_STATE_REQ);
-
-	ret = readl_poll_timeout(cdns_phy->base + PHY_PMA_XCVR_POWER_STATE_ACK,
-				 read_val, (read_val & mask) == write_val2, 0,
-				 POLL_TIMEOUT_US);
-	if (ret == -ETIMEDOUT)
-		dev_err(cdns_phy->dev,
-			"timeout waiting for link power state ack\n");
-
-	writel(0, cdns_phy->base + PHY_PMA_XCVR_POWER_STATE_REQ);
-	ndelay(100);
-}
-
-static void cdns_dp_phy_write_field(struct cdns_dp_phy *cdns_phy,
-				    unsigned int offset,
-				    unsigned char start_bit,
-				    unsigned char num_bits,
-				    unsigned int val)
-{
-	unsigned int read_val;
-
-	read_val = readl(cdns_phy->base + offset);
-	writel(((val << start_bit) | (read_val & ~(((1 << num_bits) - 1) <<
-		start_bit))), cdns_phy->base + offset);
-}
-
-static int cdns_dp_phy_probe(struct platform_device *pdev)
-{
-	struct resource *regs;
-	struct cdns_dp_phy *cdns_phy;
-	struct device *dev = &pdev->dev;
-	struct phy_provider *phy_provider;
-	struct phy *phy;
-	int err;
-
-	cdns_phy = devm_kzalloc(dev, sizeof(*cdns_phy), GFP_KERNEL);
-	if (!cdns_phy)
-		return -ENOMEM;
-
-	cdns_phy->dev = &pdev->dev;
-
-	phy = devm_phy_create(dev, NULL, &cdns_dp_phy_ops);
-	if (IS_ERR(phy)) {
-		dev_err(dev, "failed to create DisplayPort PHY\n");
-		return PTR_ERR(phy);
-	}
-
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	cdns_phy->base = devm_ioremap_resource(&pdev->dev, regs);
-	if (IS_ERR(cdns_phy->base))
-		return PTR_ERR(cdns_phy->base);
-
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	cdns_phy->sd_base = devm_ioremap_resource(&pdev->dev, regs);
-	if (IS_ERR(cdns_phy->sd_base))
-		return PTR_ERR(cdns_phy->sd_base);
-
-	err = device_property_read_u32(dev, "num_lanes",
-				       &(cdns_phy->num_lanes));
-	if (err)
-		cdns_phy->num_lanes = DEFAULT_NUM_LANES;
-
-	switch (cdns_phy->num_lanes) {
-	case 1:
-	case 2:
-	case 4:
-		/* valid number of lanes */
-		break;
-	default:
-		dev_err(dev, "unsupported number of lanes: %d\n",
-			cdns_phy->num_lanes);
-		return -EINVAL;
-	}
-
-	err = device_property_read_u32(dev, "max_bit_rate",
-		   &(cdns_phy->max_bit_rate));
-	if (err)
-		cdns_phy->max_bit_rate = DEFAULT_MAX_BIT_RATE;
-
-	switch (cdns_phy->max_bit_rate) {
-	case 2160:
-	case 2430:
-	case 2700:
-	case 3240:
-	case 4320:
-	case 5400:
-	case 8100:
-		/* valid bit rate */
-		break;
-	default:
-		dev_err(dev, "unsupported max bit rate: %dMbps\n",
-			cdns_phy->max_bit_rate);
-		return -EINVAL;
-	}
-
-	phy_set_drvdata(phy, cdns_phy);
-
-	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-
-	dev_info(dev, "%d lanes, max bit rate %d.%03d Gbps\n",
-		 cdns_phy->num_lanes,
-		 cdns_phy->max_bit_rate / 1000,
-		 cdns_phy->max_bit_rate % 1000);
-
-	return PTR_ERR_OR_ZERO(phy_provider);
-}
-
-static const struct of_device_id cdns_dp_phy_of_match[] = {
-	{
-		.compatible = "cdns,dp-phy"
-	},
-	{}
-};
-MODULE_DEVICE_TABLE(of, cdns_dp_phy_of_match);
-
-static struct platform_driver cdns_dp_phy_driver = {
-	.probe	= cdns_dp_phy_probe,
-	.driver = {
-		.name	= "cdns-dp-phy",
-		.of_match_table	= cdns_dp_phy_of_match,
-	}
-};
-module_platform_driver(cdns_dp_phy_driver);
-
-MODULE_AUTHOR("Cadence Design Systems, Inc.");
-MODULE_DESCRIPTION("Cadence MHDP PHY driver");
-MODULE_LICENSE("GPL v2");

drivers/phy/mediatek/phy-mtk-tphy.c

@@ -43,6 +43,8 @@
 #define PA0_RG_USB20_INTR_EN		BIT(5)
 
 #define U3P_USBPHYACR1		0x004
+#define PA1_RG_INTR_CAL		GENMASK(23, 19)
+#define PA1_RG_INTR_CAL_VAL(x)	((0x1f & (x)) << 19)
 #define PA1_RG_VRT_SEL			GENMASK(14, 12)
 #define PA1_RG_VRT_SEL_VAL(x)	((0x7 & (x)) << 12)
 #define PA1_RG_TERM_SEL		GENMASK(10, 8)
@@ -60,6 +62,8 @@
 #define U3P_USBPHYACR6		0x018
 #define PA6_RG_U2_BC11_SW_EN		BIT(23)
 #define PA6_RG_U2_OTG_VBUSCMP_EN	BIT(20)
+#define PA6_RG_U2_DISCTH		GENMASK(7, 4)
+#define PA6_RG_U2_DISCTH_VAL(x)	((0xf & (x)) << 4)
 #define PA6_RG_U2_SQTH		GENMASK(3, 0)
 #define PA6_RG_U2_SQTH_VAL(x)	(0xf & (x))
 
@@ -294,20 +298,21 @@ struct mtk_phy_instance {
 		struct u2phy_banks u2_banks;
 		struct u3phy_banks u3_banks;
 	};
-	struct clk *ref_clk;	/* reference clock of anolog phy */
+	struct clk *ref_clk;	/* reference clock of (digital) phy */
+	struct clk *da_ref_clk;	/* reference clock of analog phy */
 	u32 index;
 	u8 type;
 	int eye_src;
 	int eye_vrt;
 	int eye_term;
+	int intr;
+	int discth;
 	bool bc12_en;
 };
 
 struct mtk_tphy {
 	struct device *dev;
 	void __iomem *sif_base;	/* only shared sif */
-	/* deprecated, use @ref_clk instead in phy instance */
-	struct clk *u3phya_ref;	/* reference clock of usb3 anolog phy */
 	const struct mtk_phy_pdata *pdata;
 	struct mtk_phy_instance **phys;
 	int nphys;
@@ -850,9 +855,14 @@ static void phy_parse_property(struct mtk_tphy *tphy,
 				 &instance->eye_vrt);
 	device_property_read_u32(dev, "mediatek,eye-term",
 				 &instance->eye_term);
-	dev_dbg(dev, "bc12:%d, src:%d, vrt:%d, term:%d\n",
+	device_property_read_u32(dev, "mediatek,intr",
+				 &instance->intr);
+	device_property_read_u32(dev, "mediatek,discth",
+				 &instance->discth);
+	dev_dbg(dev, "bc12:%d, src:%d, vrt:%d, term:%d, intr:%d, disc:%d\n",
 		instance->bc12_en, instance->eye_src,
-		instance->eye_vrt, instance->eye_term);
+		instance->eye_vrt, instance->eye_term,
+		instance->intr, instance->discth);
 }
 
 static void u2_phy_props_set(struct mtk_tphy *tphy,
@@ -888,6 +898,20 @@ static void u2_phy_props_set(struct mtk_tphy *tphy,
 		tmp |= PA1_RG_TERM_SEL_VAL(instance->eye_term);
 		writel(tmp, com + U3P_USBPHYACR1);
 	}
+
+	if (instance->intr) {
+		tmp = readl(com + U3P_USBPHYACR1);
+		tmp &= ~PA1_RG_INTR_CAL;
+		tmp |= PA1_RG_INTR_CAL_VAL(instance->intr);
+		writel(tmp, com + U3P_USBPHYACR1);
+	}
+
+	if (instance->discth) {
+		tmp = readl(com + U3P_USBPHYACR6);
+		tmp &= ~PA6_RG_U2_DISCTH;
+		tmp |= PA6_RG_U2_DISCTH_VAL(instance->discth);
+		writel(tmp, com + U3P_USBPHYACR6);
+	}
 }
 
 static int mtk_phy_init(struct phy *phy)
@@ -896,18 +920,19 @@ static int mtk_phy_init(struct phy *phy)
 	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
 	int ret;
 
-	ret = clk_prepare_enable(tphy->u3phya_ref);
-	if (ret) {
-		dev_err(tphy->dev, "failed to enable u3phya_ref\n");
-		return ret;
-	}
-
 	ret = clk_prepare_enable(instance->ref_clk);
 	if (ret) {
 		dev_err(tphy->dev, "failed to enable ref_clk\n");
 		return ret;
 	}
 
+	ret = clk_prepare_enable(instance->da_ref_clk);
+	if (ret) {
+		dev_err(tphy->dev, "failed to enable da_ref\n");
+		clk_disable_unprepare(instance->ref_clk);
+		return ret;
+	}
+
 	switch (instance->type) {
 	case PHY_TYPE_USB2:
 		u2_phy_instance_init(tphy, instance);
@@ -967,7 +992,7 @@ static int mtk_phy_exit(struct phy *phy)
 		u2_phy_instance_exit(tphy, instance);
 
 	clk_disable_unprepare(instance->ref_clk);
-	clk_disable_unprepare(tphy->u3phya_ref);
+	clk_disable_unprepare(instance->da_ref_clk);
 	return 0;
 }
 
@@ -1102,11 +1127,6 @@ static int mtk_tphy_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* it's deprecated, make it optional for backward compatibility */
-	tphy->u3phya_ref = devm_clk_get_optional(dev, "u3phya_ref");
-	if (IS_ERR(tphy->u3phya_ref))
-		return PTR_ERR(tphy->u3phya_ref);
-
 	tphy->src_ref_clk = U3P_REF_CLK;
 	tphy->src_coef = U3P_SLEW_RATE_COEF;
 	/* update parameters of slew rate calibrate if exist */
@@ -1153,16 +1173,20 @@ static int mtk_tphy_probe(struct platform_device *pdev)
 		phy_set_drvdata(phy, instance);
 		port++;
 
-		/* if deprecated clock is provided, ignore instance's one */
+		instance->ref_clk = devm_clk_get_optional(&phy->dev, "ref");
-		if (tphy->u3phya_ref)
-			continue;
-
-		instance->ref_clk = devm_clk_get(&phy->dev, "ref");
 		if (IS_ERR(instance->ref_clk)) {
 			dev_err(dev, "failed to get ref_clk(id-%d)\n", port);
 			retval = PTR_ERR(instance->ref_clk);
 			goto put_child;
 		}
+
+		instance->da_ref_clk =
+			devm_clk_get_optional(&phy->dev, "da_ref");
+		if (IS_ERR(instance->da_ref_clk)) {
+			dev_err(dev, "failed to get da_ref_clk(id-%d)\n", port);
+			retval = PTR_ERR(instance->da_ref_clk);
+			goto put_child;
+		}
 	}
 
 	provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);

drivers/phy/qualcomm/Kconfig

@@ -91,3 +91,23 @@ config PHY_QCOM_USB_HSIC
 	select GENERIC_PHY
 	help
 	  Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
+
+config PHY_QCOM_USB_HS_28NM
+	tristate "Qualcomm 28nm High-Speed PHY"
+	depends on ARCH_QCOM || COMPILE_TEST
+	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
+	select GENERIC_PHY
+	help
+	  Enable this to support the Qualcomm Synopsys DesignWare Core 28nm
+	  High-Speed PHY driver. This driver supports the Hi-Speed PHY which
+	  is usually paired with either the ChipIdea or Synopsys DWC3 USB
+	  IPs on MSM SOCs.
+
+config PHY_QCOM_USB_SS
+	tristate "Qualcomm USB Super-Speed PHY driver"
+	depends on ARCH_QCOM || COMPILE_TEST
+	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
+	select GENERIC_PHY
+	help
+	  Enable this to support the Super-Speed USB transceiver on various
+	  Qualcomm chipsets.

drivers/phy/qualcomm/Makefile

@@ -10,3 +10,5 @@ obj-$(CONFIG_PHY_QCOM_UFS_14NM)		+= phy-qcom-ufs-qmp-14nm.o
 obj-$(CONFIG_PHY_QCOM_UFS_20NM)		+= phy-qcom-ufs-qmp-20nm.o
 obj-$(CONFIG_PHY_QCOM_USB_HS) 		+= phy-qcom-usb-hs.o
 obj-$(CONFIG_PHY_QCOM_USB_HSIC) 	+= phy-qcom-usb-hsic.o
+obj-$(CONFIG_PHY_QCOM_USB_HS_28NM)	+= phy-qcom-usb-hs-28nm.o
+obj-$(CONFIG_PHY_QCOM_USB_SS)		+= phy-qcom-usb-ss.o

drivers/phy/qualcomm/phy-qcom-qmp.c

@@ -121,6 +121,11 @@ enum qphy_reg_layout {
 	QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
 };
 
+static const unsigned int msm8996_ufsphy_regs_layout[] = {
+	[QPHY_START_CTRL]		= 0x00,
+	[QPHY_PCS_READY_STATUS]		= 0x168,
+};
+
 static const unsigned int pciephy_regs_layout[] = {
 	[QPHY_COM_SW_RESET]		= 0x400,
 	[QPHY_COM_POWER_DOWN_CONTROL]	= 0x404,
@@ -160,6 +165,18 @@ static const unsigned int qmp_v3_usb3phy_regs_layout[] = {
 	[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
 };
 
+static const unsigned int sdm845_qmp_pciephy_regs_layout[] = {
+	[QPHY_SW_RESET]			= 0x00,
+	[QPHY_START_CTRL]		= 0x08,
+	[QPHY_PCS_STATUS]		= 0x174,
+};
+
+static const unsigned int sdm845_qhp_pciephy_regs_layout[] = {
+	[QPHY_SW_RESET]			= 0x00,
+	[QPHY_START_CTRL]		= 0x08,
+	[QPHY_PCS_STATUS]		= 0x2ac,
+};
+
 static const unsigned int sdm845_ufsphy_regs_layout[] = {
 	[QPHY_START_CTRL]		= 0x00,
 	[QPHY_PCS_READY_STATUS]		= 0x160,
@@ -331,6 +348,75 @@ static const struct qmp_phy_init_tbl msm8998_pcie_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
 };
 
+static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x54),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE1, 0x98),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+	QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02),
+};
+
+static const struct qmp_phy_init_tbl msm8996_ufs_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_TERM_BW, 0x5b),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
+};
+
 static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
 	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
@@ -481,6 +567,229 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
 };
 
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x007),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x71),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_01, 0x59),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
+
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
+
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xbb),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x0d),
+
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG4, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qmp_pcie_pcs_misc_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2, 0x52),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG2, 0x10),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4, 0x1a),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5, 0x06),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_MISC_PCIE_INT_AUX_CLK_CONFIG1, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SYSCLK_EN_SEL, 0x27),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER1, 0x31),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1, 0xde),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2, 0x07),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1_MODE1, 0x4c),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2_MODE1, 0x06),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BIAS_EN_CKBUFLR_EN, 0x18),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_ENABLE1, 0xb0),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE0, 0x8c),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE0, 0x20),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE1, 0x14),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE1, 0x34),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CP_CTRL_MODE1, 0x06),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE1, 0x36),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_RESTRIM_CTRL2, 0x05),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_LOCK_CMP_EN, 0x42),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DEC_START_MODE1, 0x68),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE0, 0x03),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE1, 0xab),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE1, 0xaa),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE1, 0x02),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VCO_TUNE_MAP, 0x10),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CLK_SELECT, 0x04),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_HSCLK_SEL1, 0x30),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV, 0x04),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORE_CLK_EN, 0x73),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_CONFIG, 0x0c),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_SVS_MODE_CLK_SEL, 0x15),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CORECLK_DIV_MODE1, 0x04),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_CMN_MODE, 0x01),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV1, 0x22),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_VREGCLK_DIV2, 0x00),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BGV_TRIM, 0x20),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_COM_BG_CTRL, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL0, 0x00),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_TAP_EN, 0x0d),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TX_BAND_MODE, 0x01),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_LANE_MODE, 0x1a),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PARALLEL_RATE, 0x2f),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE0, 0x09),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE1, 0x09),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CML_CTRL_MODE2, 0x1b),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE1, 0x01),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE2, 0x07),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE0, 0x31),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE1, 0x31),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE2, 0x03),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_THRESH_DFE, 0x02),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CGA_THRESH_DFE, 0x00),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXENGINE_EN0, 0x12),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_TRAIN_TIME, 0x25),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_CTLE_DFE_OVRLP_TIME, 0x00),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_REFRESH_TIME, 0x05),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_ENABLE_TIME, 0x01),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_GAIN, 0x26),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DFE_GAIN, 0x12),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_GAIN, 0x04),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_OFFSET_GAIN, 0x04),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PRE_GAIN, 0x09),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EQ_INTVAL, 0x15),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_EDAC_INITVAL, 0x28),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB0, 0x7f),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_INITB1, 0x07),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RCVRDONE_THRESH1, 0x04),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RXEQ_CTRL, 0x70),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE0, 0x8b),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE1, 0x08),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE2, 0x0a),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE0, 0x03),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE1, 0x04),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE2, 0x04),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_UCDR_SO_CONFIG, 0x0c),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_BAND, 0x02),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE0, 0x5c),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE1, 0x3e),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE2, 0x3f),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_ENABLES, 0x01),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_CNTRL, 0xa0),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_SIGDET_DEGLITCH_CNTRL, 0x08),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DCC_GAIN, 0x01),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_EN_SIGNAL, 0xc3),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_PSM_RX_EN_CAL, 0x00),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_MISC_CNTRL0, 0xbc),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_TS0_TIMER, 0x7f),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DLL_HIGHDATARATE, 0x15),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL1, 0x0c),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_DRVR_CTRL2, 0x0f),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RX_RESETCODE_OFFSET, 0x04),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_VGA_INITVAL, 0x20),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_L0_RSM_START, 0x01),
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_rx_tbl[] = {
+};
+
+static const struct qmp_phy_init_tbl sdm845_qhp_pcie_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG, 0x3f),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_PCS_TX_RX_CONFIG, 0x50),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M3P5DB, 0x19),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M3P5DB, 0x07),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M6DB, 0x17),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M6DB, 0x09),
+	QMP_PHY_INIT_CFG(PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG5, 0x9f),
+};
+
 static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
 	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
@@ -988,6 +1297,8 @@ struct qmp_phy_cfg {
 	int rx_tbl_num;
 	const struct qmp_phy_init_tbl *pcs_tbl;
 	int pcs_tbl_num;
+	const struct qmp_phy_init_tbl *pcs_misc_tbl;
+	int pcs_misc_tbl_num;
 
 	/* clock ids to be requested */
 	const char * const *clk_list;
@@ -1122,10 +1433,18 @@ static const char * const msm8996_phy_clk_l[] = {
 	"aux", "cfg_ahb", "ref",
 };
 
+static const char * const msm8996_ufs_phy_clk_l[] = {
+	"ref",
+};
+
 static const char * const qmp_v3_phy_clk_l[] = {
 	"aux", "cfg_ahb", "ref", "com_aux",
 };
 
+static const char * const sdm845_pciephy_clk_l[] = {
+	"aux", "cfg_ahb", "ref", "refgen",
+};
+
 static const char * const sdm845_ufs_phy_clk_l[] = {
 	"ref", "ref_aux",
 };
@@ -1139,6 +1458,10 @@ static const char * const msm8996_usb3phy_reset_l[] = {
 	"phy", "common",
 };
 
+static const char * const sdm845_pciephy_reset_l[] = {
+	"phy",
+};
+
 /* list of regulators */
 static const char * const qmp_phy_vreg_l[] = {
 	"vdda-phy", "vdda-pll",
@@ -1175,6 +1498,31 @@ static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
 	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
 };
 
+static const struct qmp_phy_cfg msm8996_ufs_cfg = {
+	.type			= PHY_TYPE_UFS,
+	.nlanes			= 1,
+
+	.serdes_tbl		= msm8996_ufs_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(msm8996_ufs_serdes_tbl),
+	.tx_tbl			= msm8996_ufs_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(msm8996_ufs_tx_tbl),
+	.rx_tbl			= msm8996_ufs_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(msm8996_ufs_rx_tbl),
+
+	.clk_list		= msm8996_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(msm8996_ufs_phy_clk_l),
+
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+
+	.regs			= msm8996_ufsphy_regs_layout,
+
+	.start_ctrl		= SERDES_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+
+	.no_pcs_sw_reset	= true,
+};
+
 static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
 	.type			= PHY_TYPE_USB3,
 	.nlanes			= 1,
@@ -1234,6 +1582,64 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
 	.pwrdn_delay_max	= 1005,		/* us */
 };
 
+static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
+	.type = PHY_TYPE_PCIE,
+	.nlanes = 1,
+
+	.serdes_tbl		= sdm845_qmp_pcie_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sdm845_qmp_pcie_serdes_tbl),
+	.tx_tbl			= sdm845_qmp_pcie_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sdm845_qmp_pcie_tx_tbl),
+	.rx_tbl			= sdm845_qmp_pcie_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sdm845_qmp_pcie_rx_tbl),
+	.pcs_tbl		= sdm845_qmp_pcie_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sdm845_qmp_pcie_pcs_tbl),
+	.pcs_misc_tbl		= sdm845_qmp_pcie_pcs_misc_tbl,
+	.pcs_misc_tbl_num	= ARRAY_SIZE(sdm845_qmp_pcie_pcs_misc_tbl),
+	.clk_list		= sdm845_pciephy_clk_l,
+	.num_clks		= ARRAY_SIZE(sdm845_pciephy_clk_l),
+	.reset_list		= sdm845_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= sdm845_qmp_pciephy_regs_layout,
+
+	.start_ctrl		= PCS_START | SERDES_START,
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+
+	.has_pwrdn_delay	= true,
+	.pwrdn_delay_min	= 995,		/* us */
+	.pwrdn_delay_max	= 1005,		/* us */
+};
+
+static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
+	.type = PHY_TYPE_PCIE,
+	.nlanes = 1,
+
+	.serdes_tbl		= sdm845_qhp_pcie_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sdm845_qhp_pcie_serdes_tbl),
+	.tx_tbl			= sdm845_qhp_pcie_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sdm845_qhp_pcie_tx_tbl),
+	.rx_tbl			= sdm845_qhp_pcie_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sdm845_qhp_pcie_rx_tbl),
+	.pcs_tbl		= sdm845_qhp_pcie_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sdm845_qhp_pcie_pcs_tbl),
+	.clk_list		= sdm845_pciephy_clk_l,
+	.num_clks		= ARRAY_SIZE(sdm845_pciephy_clk_l),
+	.reset_list		= sdm845_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= sdm845_qhp_pciephy_regs_layout,
+
+	.start_ctrl		= PCS_START | SERDES_START,
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+
+	.has_pwrdn_delay	= true,
+	.pwrdn_delay_min	= 995,		/* us */
+	.pwrdn_delay_max	= 1005,		/* us */
+};
+
 static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
 	.type			= PHY_TYPE_USB3,
 	.nlanes			= 1,
@@ -1563,6 +1969,7 @@ static int qcom_qmp_phy_enable(struct phy *phy)
 	void __iomem *tx = qphy->tx;
 	void __iomem *rx = qphy->rx;
 	void __iomem *pcs = qphy->pcs;
+	void __iomem *pcs_misc = qphy->pcs_misc;
 	void __iomem *dp_com = qmp->dp_com;
 	void __iomem *status;
 	unsigned int mask, val, ready;
@@ -1633,6 +2040,9 @@ static int qcom_qmp_phy_enable(struct phy *phy)
 	if (ret)
 		goto err_lane_rst;
 
+	qcom_qmp_phy_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl,
+			       cfg->pcs_misc_tbl_num);
+
 	/*
 	 * Pull out PHY from POWER DOWN state.
 	 * This is active low enable signal to power-down PHY.
@@ -1967,7 +2377,7 @@ static const struct phy_ops qcom_qmp_phy_gen_ops = {
 	.owner		= THIS_MODULE,
 };
 
-static const struct phy_ops qcom_qmp_ufs_ops = {
+static const struct phy_ops qcom_qmp_pcie_ufs_ops = {
 	.power_on	= qcom_qmp_phy_enable,
 	.power_off	= qcom_qmp_phy_disable,
 	.set_mode	= qcom_qmp_phy_set_mode,
@@ -2067,8 +2477,8 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
 		}
 	}
 
-	if (qmp->cfg->type == PHY_TYPE_UFS)
+	if (qmp->cfg->type == PHY_TYPE_UFS || qmp->cfg->type == PHY_TYPE_PCIE)
-		ops = &qcom_qmp_ufs_ops;
+		ops = &qcom_qmp_pcie_ufs_ops;
 
 	generic_phy = devm_phy_create(dev, np, ops);
 	if (IS_ERR(generic_phy)) {
@@ -2090,6 +2500,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
 	{
 		.compatible = "qcom,msm8996-qmp-pcie-phy",
 		.data = &msm8996_pciephy_cfg,
+	}, {
+		.compatible = "qcom,msm8996-qmp-ufs-phy",
+		.data = &msm8996_ufs_cfg,
 	}, {
 		.compatible = "qcom,msm8996-qmp-usb3-phy",
 		.data = &msm8996_usb3phy_cfg,
@@ -2102,6 +2515,12 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
 	}, {
 		.compatible = "qcom,ipq8074-qmp-pcie-phy",
 		.data = &ipq8074_pciephy_cfg,
+	}, {
+		.compatible = "qcom,sdm845-qhp-pcie-phy",
+		.data = &sdm845_qhp_pciephy_cfg,
+	}, {
+		.compatible = "qcom,sdm845-qmp-pcie-phy",
+		.data = &sdm845_qmp_pciephy_cfg,
 	}, {
 		.compatible = "qcom,sdm845-qmp-usb3-phy",
 		.data = &qmp_v3_usb3phy_cfg,

drivers/phy/qualcomm/phy-qcom-qmp.h

@@ -409,4 +409,118 @@
 #define QPHY_V4_TX_MID_TERM_CTRL1			0x1d8
 #define QPHY_V4_MULTI_LANE_CTRL1			0x1e0
 
+/* PCIE GEN3 COM registers */
+#define PCIE_GEN3_QHP_COM_SSC_EN_CENTER			0x14
+#define PCIE_GEN3_QHP_COM_SSC_PER1			0x20
+#define PCIE_GEN3_QHP_COM_SSC_PER2			0x24
+#define PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1		0x28
+#define PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2		0x2c
+#define PCIE_GEN3_QHP_COM_SSC_STEP_SIZE1_MODE1		0x34
+#define PCIE_GEN3_QHP_COM_SSC_STEP_SIZE2_MODE1		0x38
+#define PCIE_GEN3_QHP_COM_BIAS_EN_CKBUFLR_EN		0x54
+#define PCIE_GEN3_QHP_COM_CLK_ENABLE1			0x58
+#define PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE0		0x6c
+#define PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE0		0x70
+#define PCIE_GEN3_QHP_COM_LOCK_CMP1_MODE1		0x78
+#define PCIE_GEN3_QHP_COM_LOCK_CMP2_MODE1		0x7c
+#define PCIE_GEN3_QHP_COM_BGV_TRIM			0x98
+#define PCIE_GEN3_QHP_COM_CP_CTRL_MODE0			0xb4
+#define PCIE_GEN3_QHP_COM_CP_CTRL_MODE1			0xb8
+#define PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE0		0xc0
+#define PCIE_GEN3_QHP_COM_PLL_RCTRL_MODE1		0xc4
+#define PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE0		0xcc
+#define PCIE_GEN3_QHP_COM_PLL_CCTRL_MODE1		0xd0
+#define PCIE_GEN3_QHP_COM_SYSCLK_EN_SEL			0xdc
+#define PCIE_GEN3_QHP_COM_RESTRIM_CTRL2			0xf0
+#define PCIE_GEN3_QHP_COM_LOCK_CMP_EN			0xf8
+#define PCIE_GEN3_QHP_COM_DEC_START_MODE0		0x100
+#define PCIE_GEN3_QHP_COM_DEC_START_MODE1		0x108
+#define PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE0		0x11c
+#define PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE0		0x120
+#define PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE0		0x124
+#define PCIE_GEN3_QHP_COM_DIV_FRAC_START1_MODE1		0x128
+#define PCIE_GEN3_QHP_COM_DIV_FRAC_START2_MODE1		0x12c
+#define PCIE_GEN3_QHP_COM_DIV_FRAC_START3_MODE1		0x130
+#define PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE0		0x150
+#define PCIE_GEN3_QHP_COM_INTEGLOOP_GAIN0_MODE1		0x158
+#define PCIE_GEN3_QHP_COM_VCO_TUNE_MAP			0x178
+#define PCIE_GEN3_QHP_COM_BG_CTRL			0x1c8
+#define PCIE_GEN3_QHP_COM_CLK_SELECT			0x1cc
+#define PCIE_GEN3_QHP_COM_HSCLK_SEL1			0x1d0
+#define PCIE_GEN3_QHP_COM_CORECLK_DIV			0x1e0
+#define PCIE_GEN3_QHP_COM_CORE_CLK_EN			0x1e8
+#define PCIE_GEN3_QHP_COM_CMN_CONFIG			0x1f0
+#define PCIE_GEN3_QHP_COM_SVS_MODE_CLK_SEL		0x1fc
+#define PCIE_GEN3_QHP_COM_CORECLK_DIV_MODE1		0x21c
+#define PCIE_GEN3_QHP_COM_CMN_MODE			0x224
+#define PCIE_GEN3_QHP_COM_VREGCLK_DIV1			0x228
+#define PCIE_GEN3_QHP_COM_VREGCLK_DIV2			0x22c
+
+/* PCIE GEN3 QHP Lane registers */
+#define PCIE_GEN3_QHP_L0_DRVR_CTRL0			0xc
+#define PCIE_GEN3_QHP_L0_DRVR_CTRL1			0x10
+#define PCIE_GEN3_QHP_L0_DRVR_CTRL2			0x14
+#define PCIE_GEN3_QHP_L0_DRVR_TAP_EN			0x18
+#define PCIE_GEN3_QHP_L0_TX_BAND_MODE			0x60
+#define PCIE_GEN3_QHP_L0_LANE_MODE			0x64
+#define PCIE_GEN3_QHP_L0_PARALLEL_RATE			0x7c
+#define PCIE_GEN3_QHP_L0_CML_CTRL_MODE0			0xc0
+#define PCIE_GEN3_QHP_L0_CML_CTRL_MODE1			0xc4
+#define PCIE_GEN3_QHP_L0_CML_CTRL_MODE2			0xc8
+#define PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE1		0xd0
+#define PCIE_GEN3_QHP_L0_PREAMP_CTRL_MODE2		0xd4
+#define PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE0		0xd8
+#define PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE1		0xdc
+#define PCIE_GEN3_QHP_L0_MIXER_CTRL_MODE2		0xe0
+#define PCIE_GEN3_QHP_L0_CTLE_THRESH_DFE		0xfc
+#define PCIE_GEN3_QHP_L0_CGA_THRESH_DFE			0x100
+#define PCIE_GEN3_QHP_L0_RXENGINE_EN0			0x108
+#define PCIE_GEN3_QHP_L0_CTLE_TRAIN_TIME		0x114
+#define PCIE_GEN3_QHP_L0_CTLE_DFE_OVRLP_TIME		0x118
+#define PCIE_GEN3_QHP_L0_DFE_REFRESH_TIME		0x11c
+#define PCIE_GEN3_QHP_L0_DFE_ENABLE_TIME		0x120
+#define PCIE_GEN3_QHP_L0_VGA_GAIN			0x124
+#define PCIE_GEN3_QHP_L0_DFE_GAIN			0x128
+#define PCIE_GEN3_QHP_L0_EQ_GAIN			0x130
+#define PCIE_GEN3_QHP_L0_OFFSET_GAIN			0x134
+#define PCIE_GEN3_QHP_L0_PRE_GAIN			0x138
+#define PCIE_GEN3_QHP_L0_VGA_INITVAL			0x13c
+#define PCIE_GEN3_QHP_L0_EQ_INTVAL			0x154
+#define PCIE_GEN3_QHP_L0_EDAC_INITVAL			0x160
+#define PCIE_GEN3_QHP_L0_RXEQ_INITB0			0x168
+#define PCIE_GEN3_QHP_L0_RXEQ_INITB1			0x16c
+#define PCIE_GEN3_QHP_L0_RCVRDONE_THRESH1		0x178
+#define PCIE_GEN3_QHP_L0_RXEQ_CTRL			0x180
+#define PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE0		0x184
+#define PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE1		0x188
+#define PCIE_GEN3_QHP_L0_UCDR_FO_GAIN_MODE2		0x18c
+#define PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE0		0x190
+#define PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE1		0x194
+#define PCIE_GEN3_QHP_L0_UCDR_SO_GAIN_MODE2		0x198
+#define PCIE_GEN3_QHP_L0_UCDR_SO_CONFIG			0x19c
+#define PCIE_GEN3_QHP_L0_RX_BAND			0x1a4
+#define PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE0		0x1c0
+#define PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE1		0x1c4
+#define PCIE_GEN3_QHP_L0_RX_RCVR_PATH1_MODE2		0x1c8
+#define PCIE_GEN3_QHP_L0_SIGDET_ENABLES			0x230
+#define PCIE_GEN3_QHP_L0_SIGDET_CNTRL			0x234
+#define PCIE_GEN3_QHP_L0_SIGDET_DEGLITCH_CNTRL		0x238
+#define PCIE_GEN3_QHP_L0_DCC_GAIN			0x2a4
+#define PCIE_GEN3_QHP_L0_RSM_START			0x2a8
+#define PCIE_GEN3_QHP_L0_RX_EN_SIGNAL			0x2ac
+#define PCIE_GEN3_QHP_L0_PSM_RX_EN_CAL			0x2b0
+#define PCIE_GEN3_QHP_L0_RX_MISC_CNTRL0			0x2b8
+#define PCIE_GEN3_QHP_L0_TS0_TIMER			0x2c0
+#define PCIE_GEN3_QHP_L0_DLL_HIGHDATARATE		0x2c4
+#define PCIE_GEN3_QHP_L0_RX_RESETCODE_OFFSET		0x2cc
+
+/* PCIE GEN3 PCS registers */
+#define PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M3P5DB		0x2c
+#define PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M3P5DB		0x40
+#define PCIE_GEN3_QHP_PHY_TXMGN_MAIN_V0_M6DB		0x54
+#define PCIE_GEN3_QHP_PHY_TXMGN_POST_V0_M6DB		0x68
+#define PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG		0x15c
+#define PCIE_GEN3_QHP_PHY_POWER_STATE_CONFIG5		0x16c
+#define PCIE_GEN3_QHP_PHY_PCS_TX_RX_CONFIG		0x174
+
 #endif

drivers/phy/qualcomm/phy-qcom-qusb2.c

@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017, 2019, The Linux Foundation. All rights reserved.
  */
 
 #include <linux/clk.h>
@@ -66,6 +66,14 @@
 #define IMP_RES_OFFSET_MASK			GENMASK(5, 0)
 #define IMP_RES_OFFSET_SHIFT			0x0
 
+/* QUSB2PHY_PLL_BIAS_CONTROL_2 register bits */
+#define BIAS_CTRL2_RES_OFFSET_MASK		GENMASK(5, 0)
+#define BIAS_CTRL2_RES_OFFSET_SHIFT		0x0
+
+/* QUSB2PHY_CHG_CONTROL_2 register bits */
+#define CHG_CTRL2_OFFSET_MASK			GENMASK(5, 4)
+#define CHG_CTRL2_OFFSET_SHIFT			0x4
+
 /* QUSB2PHY_PORT_TUNE1 register bits */
 #define HSTX_TRIM_MASK				GENMASK(7, 4)
 #define HSTX_TRIM_SHIFT				0x4
@@ -73,6 +81,10 @@
 #define PREEMPHASIS_EN_MASK			GENMASK(1, 0)
 #define PREEMPHASIS_EN_SHIFT			0x0
 
+/* QUSB2PHY_PORT_TUNE2 register bits */
+#define HSDISC_TRIM_MASK			GENMASK(1, 0)
+#define HSDISC_TRIM_SHIFT			0x0
+
 #define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO	0x04
 #define QUSB2PHY_PLL_CLOCK_INVERTERS		0x18c
 #define QUSB2PHY_PLL_CMODE			0x2c
@@ -177,7 +189,7 @@ static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = {
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
 };
 
-static const unsigned int sdm845_regs_layout[] = {
+static const unsigned int qusb2_v2_regs_layout[] = {
 	[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
 	[QUSB2PHY_PLL_STATUS]		= 0x1a0,
 	[QUSB2PHY_PORT_TUNE1]		= 0x240,
@@ -191,7 +203,7 @@ static const unsigned int sdm845_regs_layout[] = {
 	[QUSB2PHY_INTR_CTRL]		= 0x230,
 };
 
-static const struct qusb2_phy_init_tbl sdm845_init_tbl[] = {
+static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = {
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03),
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
@@ -258,10 +270,10 @@ static const struct qusb2_phy_cfg msm8998_phy_cfg = {
 	.update_tune1_with_efuse = true,
 };
 
-static const struct qusb2_phy_cfg sdm845_phy_cfg = {
+static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
-	.tbl		= sdm845_init_tbl,
+	.tbl		= qusb2_v2_init_tbl,
-	.tbl_num	= ARRAY_SIZE(sdm845_init_tbl),
+	.tbl_num	= ARRAY_SIZE(qusb2_v2_init_tbl),
-	.regs		= sdm845_regs_layout,
+	.regs		= qusb2_v2_regs_layout,
 
 	.disable_ctrl	= (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN |
 			   POWER_DOWN),
@@ -277,6 +289,34 @@ static const char * const qusb2_phy_vreg_names[] = {
 
 #define QUSB2_NUM_VREGS		ARRAY_SIZE(qusb2_phy_vreg_names)
 
+/* struct override_param - structure holding qusb2 v2 phy overriding param
+ * set override true if the  device tree property exists and read and assign
+ * to value
+ */
+struct override_param {
+	bool override;
+	u8 value;
+};
+
+/*struct override_params - structure holding qusb2 v2 phy overriding params
+ * @imp_res_offset: rescode offset to be updated in IMP_CTRL1 register
+ * @hstx_trim: HSTX_TRIM to be updated in TUNE1 register
+ * @preemphasis: Amplitude Pre-Emphasis to be updated in TUNE1 register
+ * @preemphasis_width: half/full-width Pre-Emphasis updated via TUNE1
+ * @bias_ctrl: bias ctrl to be updated in BIAS_CONTROL_2 register
+ * @charge_ctrl: charge ctrl to be updated in CHG_CTRL2 register
+ * @hsdisc_trim: disconnect threshold to be updated in TUNE2 register
+ */
+struct override_params {
+	struct override_param imp_res_offset;
+	struct override_param hstx_trim;
+	struct override_param preemphasis;
+	struct override_param preemphasis_width;
+	struct override_param bias_ctrl;
+	struct override_param charge_ctrl;
+	struct override_param hsdisc_trim;
+};
+
 /**
  * struct qusb2_phy - structure holding qusb2 phy attributes
  *
@@ -292,14 +332,7 @@ static const char * const qusb2_phy_vreg_names[] = {
  * @tcsr: TCSR syscon register map
  * @cell: nvmem cell containing phy tuning value
  *
- * @override_imp_res_offset: PHY should use different rescode offset
+ * @overrides: pointer to structure for all overriding tuning params
- * @imp_res_offset_value: rescode offset to be updated in IMP_CTRL1 register
- * @override_hstx_trim: PHY should use different HSTX o/p current value
- * @hstx_trim_value: HSTX_TRIM value to be updated in TUNE1 register
- * @override_preemphasis: PHY should use different pre-amphasis amplitude
- * @preemphasis_level: Amplitude Pre-Emphasis to be updated in TUNE1 register
- * @override_preemphasis_width: PHY should use different pre-emphasis duration
- * @preemphasis_width: half/full-width Pre-Emphasis updated via TUNE1
  *
  * @cfg: phy config data
  * @has_se_clk_scheme: indicate if PHY has single-ended ref clock scheme
@@ -319,14 +352,7 @@ struct qusb2_phy {
 	struct regmap *tcsr;
 	struct nvmem_cell *cell;
 
-	bool override_imp_res_offset;
+	struct override_params overrides;
-	u8 imp_res_offset_value;
-	bool override_hstx_trim;
-	u8 hstx_trim_value;
-	bool override_preemphasis;
-	u8 preemphasis_level;
-	bool override_preemphasis_width;
-	u8 preemphasis_width;
 
 	const struct qusb2_phy_cfg *cfg;
 	bool has_se_clk_scheme;
@@ -394,24 +420,35 @@ void qcom_qusb2_phy_configure(void __iomem *base,
 static void qusb2_phy_override_phy_params(struct qusb2_phy *qphy)
 {
 	const struct qusb2_phy_cfg *cfg = qphy->cfg;
+	struct override_params *or = &qphy->overrides;
 
-	if (qphy->override_imp_res_offset)
+	if (or->imp_res_offset.override)
 		qusb2_write_mask(qphy->base, QUSB2PHY_IMP_CTRL1,
-			     qphy->imp_res_offset_value << IMP_RES_OFFSET_SHIFT,
+		or->imp_res_offset.value << IMP_RES_OFFSET_SHIFT,
 			     IMP_RES_OFFSET_MASK);
 
-	if (qphy->override_hstx_trim)
+	if (or->bias_ctrl.override)
+		qusb2_write_mask(qphy->base, QUSB2PHY_PLL_BIAS_CONTROL_2,
+		or->bias_ctrl.value << BIAS_CTRL2_RES_OFFSET_SHIFT,
+			   BIAS_CTRL2_RES_OFFSET_MASK);
+
+	if (or->charge_ctrl.override)
+		qusb2_write_mask(qphy->base, QUSB2PHY_CHG_CTRL2,
+		or->charge_ctrl.value << CHG_CTRL2_OFFSET_SHIFT,
+			     CHG_CTRL2_OFFSET_MASK);
+
+	if (or->hstx_trim.override)
 		qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
-				 qphy->hstx_trim_value << HSTX_TRIM_SHIFT,
+		or->hstx_trim.value << HSTX_TRIM_SHIFT,
 				 HSTX_TRIM_MASK);
 
-	if (qphy->override_preemphasis)
+	if (or->preemphasis.override)
 		qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
-				qphy->preemphasis_level << PREEMPHASIS_EN_SHIFT,
+		or->preemphasis.value << PREEMPHASIS_EN_SHIFT,
 				PREEMPHASIS_EN_MASK);
 
-	if (qphy->override_preemphasis_width) {
+	if (or->preemphasis_width.override) {
-		if (qphy->preemphasis_width ==
+		if (or->preemphasis_width.value ==
 		    QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT)
 			qusb2_setbits(qphy->base,
 				      cfg->regs[QUSB2PHY_PORT_TUNE1],
@@ -421,6 +458,11 @@ static void qusb2_phy_override_phy_params(struct qusb2_phy *qphy)
 				      cfg->regs[QUSB2PHY_PORT_TUNE1],
 				      PREEMPH_WIDTH_HALF_BIT);
 	}
+
+	if (or->hsdisc_trim.override)
+		qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
+		or->hsdisc_trim.value << HSDISC_TRIM_SHIFT,
+				 HSDISC_TRIM_MASK);
 }
 
 /*
@@ -774,8 +816,8 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
 		.compatible	= "qcom,msm8998-qusb2-phy",
 		.data		= &msm8998_phy_cfg,
 	}, {
-		.compatible	= "qcom,sdm845-qusb2-phy",
+		.compatible	= "qcom,qusb2-v2-phy",
-		.data		= &sdm845_phy_cfg,
+		.data		= &qusb2_v2_phy_cfg,
 	},
 	{ },
 };
@@ -796,10 +838,12 @@ static int qusb2_phy_probe(struct platform_device *pdev)
 	int ret, i;
 	int num;
 	u32 value;
+	struct override_params *or;
 
 	qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
 	if (!qphy)
 		return -ENOMEM;
+	or = &qphy->overrides;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	qphy->base = devm_ioremap_resource(dev, res);
@@ -864,26 +908,44 @@ static int qusb2_phy_probe(struct platform_device *pdev)
 
 	if (!of_property_read_u32(dev->of_node, "qcom,imp-res-offset-value",
 				  &value)) {
-		qphy->imp_res_offset_value = (u8)value;
+		or->imp_res_offset.value = (u8)value;
-		qphy->override_imp_res_offset = true;
+		or->imp_res_offset.override = true;
+	}
+
+	if (!of_property_read_u32(dev->of_node, "qcom,bias-ctrl-value",
+				  &value)) {
+		or->bias_ctrl.value = (u8)value;
+		or->bias_ctrl.override = true;
+	}
+
+	if (!of_property_read_u32(dev->of_node, "qcom,charge-ctrl-value",
+				  &value)) {
+		or->charge_ctrl.value = (u8)value;
+		or->charge_ctrl.override = true;
 	}
 
 	if (!of_property_read_u32(dev->of_node, "qcom,hstx-trim-value",
 				  &value)) {
-		qphy->hstx_trim_value = (u8)value;
+		or->hstx_trim.value = (u8)value;
-		qphy->override_hstx_trim = true;
+		or->hstx_trim.override = true;
 	}
 
 	if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-level",
 				     &value)) {
-		qphy->preemphasis_level = (u8)value;
+		or->preemphasis.value = (u8)value;
-		qphy->override_preemphasis = true;
+		or->preemphasis.override = true;
 	}
 
 	if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-width",
 				     &value)) {
-		qphy->preemphasis_width = (u8)value;
+		or->preemphasis_width.value = (u8)value;
-		qphy->override_preemphasis_width = true;
+		or->preemphasis_width.override = true;
+	}
+
+	if (!of_property_read_u32(dev->of_node, "qcom,hsdisc-trim-value",
+				  &value)) {
+		or->hsdisc_trim.value = (u8)value;
+		or->hsdisc_trim.override = true;
 	}
 
 	pm_runtime_set_active(dev);

drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c

@@ -0,0 +1,415 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2009-2018, Linux Foundation. All rights reserved.
+ * Copyright (c) 2018-2020, Linaro Limited
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+/* PHY register and bit definitions */
+#define PHY_CTRL_COMMON0		0x078
+#define SIDDQ				BIT(2)
+#define PHY_IRQ_CMD			0x0d0
+#define PHY_INTR_MASK0			0x0d4
+#define PHY_INTR_CLEAR0			0x0dc
+#define DPDM_MASK			0x1e
+#define DP_1_0				BIT(4)
+#define DP_0_1				BIT(3)
+#define DM_1_0				BIT(2)
+#define DM_0_1				BIT(1)
+
+enum hsphy_voltage {
+	VOL_NONE,
+	VOL_MIN,
+	VOL_MAX,
+	VOL_NUM,
+};
+
+enum hsphy_vreg {
+	VDD,
+	VDDA_1P8,
+	VDDA_3P3,
+	VREG_NUM,
+};
+
+struct hsphy_init_seq {
+	int offset;
+	int val;
+	int delay;
+};
+
+struct hsphy_data {
+	const struct hsphy_init_seq *init_seq;
+	unsigned int init_seq_num;
+};
+
+struct hsphy_priv {
+	void __iomem *base;
+	struct clk_bulk_data *clks;
+	int num_clks;
+	struct reset_control *phy_reset;
+	struct reset_control *por_reset;
+	struct regulator_bulk_data vregs[VREG_NUM];
+	const struct hsphy_data *data;
+	enum phy_mode mode;
+};
+
+static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode,
+				    int submode)
+{
+	struct hsphy_priv *priv = phy_get_drvdata(phy);
+
+	priv->mode = PHY_MODE_INVALID;
+
+	if (mode > 0)
+		priv->mode = mode;
+
+	return 0;
+}
+
+static void qcom_snps_hsphy_enable_hv_interrupts(struct hsphy_priv *priv)
+{
+	u32 val;
+
+	/* Clear any existing interrupts before enabling the interrupts */
+	val = readb(priv->base + PHY_INTR_CLEAR0);
+	val |= DPDM_MASK;
+	writeb(val, priv->base + PHY_INTR_CLEAR0);
+
+	writeb(0x0, priv->base + PHY_IRQ_CMD);
+	usleep_range(200, 220);
+	writeb(0x1, priv->base + PHY_IRQ_CMD);
+
+	/* Make sure the interrupts are cleared */
+	usleep_range(200, 220);
+
+	val = readb(priv->base + PHY_INTR_MASK0);
+	switch (priv->mode) {
+	case PHY_MODE_USB_HOST_HS:
+	case PHY_MODE_USB_HOST_FS:
+	case PHY_MODE_USB_DEVICE_HS:
+	case PHY_MODE_USB_DEVICE_FS:
+		val |= DP_1_0 | DM_0_1;
+		break;
+	case PHY_MODE_USB_HOST_LS:
+	case PHY_MODE_USB_DEVICE_LS:
+		val |= DP_0_1 | DM_1_0;
+		break;
+	default:
+		/* No device connected */
+		val |= DP_0_1 | DM_0_1;
+		break;
+	}
+	writeb(val, priv->base + PHY_INTR_MASK0);
+}
+
+static void qcom_snps_hsphy_disable_hv_interrupts(struct hsphy_priv *priv)
+{
+	u32 val;
+
+	val = readb(priv->base + PHY_INTR_MASK0);
+	val &= ~DPDM_MASK;
+	writeb(val, priv->base + PHY_INTR_MASK0);
+
+	/* Clear any pending interrupts */
+	val = readb(priv->base + PHY_INTR_CLEAR0);
+	val |= DPDM_MASK;
+	writeb(val, priv->base + PHY_INTR_CLEAR0);
+
+	writeb(0x0, priv->base + PHY_IRQ_CMD);
+	usleep_range(200, 220);
+
+	writeb(0x1, priv->base + PHY_IRQ_CMD);
+	usleep_range(200, 220);
+}
+
+static void qcom_snps_hsphy_enter_retention(struct hsphy_priv *priv)
+{
+	u32 val;
+
+	val = readb(priv->base + PHY_CTRL_COMMON0);
+	val |= SIDDQ;
+	writeb(val, priv->base + PHY_CTRL_COMMON0);
+}
+
+static void qcom_snps_hsphy_exit_retention(struct hsphy_priv *priv)
+{
+	u32 val;
+
+	val = readb(priv->base + PHY_CTRL_COMMON0);
+	val &= ~SIDDQ;
+	writeb(val, priv->base + PHY_CTRL_COMMON0);
+}
+
+static int qcom_snps_hsphy_power_on(struct phy *phy)
+{
+	struct hsphy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = regulator_bulk_enable(VREG_NUM, priv->vregs);
+	if (ret)
+		return ret;
+	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+	if (ret)
+		goto err_disable_regulator;
+	qcom_snps_hsphy_disable_hv_interrupts(priv);
+	qcom_snps_hsphy_exit_retention(priv);
+
+	return 0;
+
+err_disable_regulator:
+	regulator_bulk_disable(VREG_NUM, priv->vregs);
+
+	return ret;
+}
+
+static int qcom_snps_hsphy_power_off(struct phy *phy)
+{
+	struct hsphy_priv *priv = phy_get_drvdata(phy);
+
+	qcom_snps_hsphy_enter_retention(priv);
+	qcom_snps_hsphy_enable_hv_interrupts(priv);
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	regulator_bulk_disable(VREG_NUM, priv->vregs);
+
+	return 0;
+}
+
+static int qcom_snps_hsphy_reset(struct hsphy_priv *priv)
+{
+	int ret;
+
+	ret = reset_control_assert(priv->phy_reset);
+	if (ret)
+		return ret;
+
+	usleep_range(10, 15);
+
+	ret = reset_control_deassert(priv->phy_reset);
+	if (ret)
+		return ret;
+
+	usleep_range(80, 100);
+
+	return 0;
+}
+
+static void qcom_snps_hsphy_init_sequence(struct hsphy_priv *priv)
+{
+	const struct hsphy_data *data = priv->data;
+	const struct hsphy_init_seq *seq;
+	int i;
+
+	/* Device match data is optional. */
+	if (!data)
+		return;
+
+	seq = data->init_seq;
+
+	for (i = 0; i < data->init_seq_num; i++, seq++) {
+		writeb(seq->val, priv->base + seq->offset);
+		if (seq->delay)
+			usleep_range(seq->delay, seq->delay + 10);
+	}
+}
+
+static int qcom_snps_hsphy_por_reset(struct hsphy_priv *priv)
+{
+	int ret;
+
+	ret = reset_control_assert(priv->por_reset);
+	if (ret)
+		return ret;
+
+	/*
+	 * The Femto PHY is POR reset in the following scenarios.
+	 *
+	 * 1. After overriding the parameter registers.
+	 * 2. Low power mode exit from PHY retention.
+	 *
+	 * Ensure that SIDDQ is cleared before bringing the PHY
+	 * out of reset.
+	 */
+	qcom_snps_hsphy_exit_retention(priv);
+
+	/*
+	 * As per databook, 10 usec delay is required between
+	 * PHY POR assert and de-assert.
+	 */
+	usleep_range(10, 20);
+	ret = reset_control_deassert(priv->por_reset);
+	if (ret)
+		return ret;
+
+	/*
+	 * As per databook, it takes 75 usec for PHY to stabilize
+	 * after the reset.
+	 */
+	usleep_range(80, 100);
+
+	return 0;
+}
+
+static int qcom_snps_hsphy_init(struct phy *phy)
+{
+	struct hsphy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = qcom_snps_hsphy_reset(priv);
+	if (ret)
+		return ret;
+
+	qcom_snps_hsphy_init_sequence(priv);
+
+	ret = qcom_snps_hsphy_por_reset(priv);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct phy_ops qcom_snps_hsphy_ops = {
+	.init = qcom_snps_hsphy_init,
+	.power_on = qcom_snps_hsphy_power_on,
+	.power_off = qcom_snps_hsphy_power_off,
+	.set_mode = qcom_snps_hsphy_set_mode,
+	.owner = THIS_MODULE,
+};
+
+static const char * const qcom_snps_hsphy_clks[] = {
+	"ref",
+	"ahb",
+	"sleep",
+};
+
+static int qcom_snps_hsphy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *provider;
+	struct hsphy_priv *priv;
+	struct phy *phy;
+	int ret;
+	int i;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->num_clks = ARRAY_SIZE(qcom_snps_hsphy_clks);
+	priv->clks = devm_kcalloc(dev, priv->num_clks, sizeof(*priv->clks),
+				  GFP_KERNEL);
+	if (!priv->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < priv->num_clks; i++)
+		priv->clks[i].id = qcom_snps_hsphy_clks[i];
+
+	ret = devm_clk_bulk_get(dev, priv->num_clks, priv->clks);
+	if (ret)
+		return ret;
+
+	priv->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
+	if (IS_ERR(priv->phy_reset))
+		return PTR_ERR(priv->phy_reset);
+
+	priv->por_reset = devm_reset_control_get_exclusive(dev, "por");
+	if (IS_ERR(priv->por_reset))
+		return PTR_ERR(priv->por_reset);
+
+	priv->vregs[VDD].supply = "vdd";
+	priv->vregs[VDDA_1P8].supply = "vdda1p8";
+	priv->vregs[VDDA_3P3].supply = "vdda3p3";
+
+	ret = devm_regulator_bulk_get(dev, VREG_NUM, priv->vregs);
+	if (ret)
+		return ret;
+
+	/* Get device match data */
+	priv->data = device_get_match_data(dev);
+
+	phy = devm_phy_create(dev, dev->of_node, &qcom_snps_hsphy_ops);
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
+
+	phy_set_drvdata(phy, priv);
+
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(provider))
+		return PTR_ERR(provider);
+
+	ret = regulator_set_load(priv->vregs[VDDA_1P8].consumer, 19000);
+	if (ret < 0)
+		return ret;
+
+	ret = regulator_set_load(priv->vregs[VDDA_3P3].consumer, 16000);
+	if (ret < 0)
+		goto unset_1p8_load;
+
+	return 0;
+
+unset_1p8_load:
+	regulator_set_load(priv->vregs[VDDA_1P8].consumer, 0);
+
+	return ret;
+}
+
+/*
+ * The macro is used to define an initialization sequence.  Each tuple
+ * is meant to program 'value' into phy register at 'offset' with 'delay'
+ * in us followed.
+ */
+#define HSPHY_INIT_CFG(o, v, d)	{ .offset = o, .val = v, .delay = d, }
+
+static const struct hsphy_init_seq init_seq_femtophy[] = {
+	HSPHY_INIT_CFG(0xc0, 0x01, 0),
+	HSPHY_INIT_CFG(0xe8, 0x0d, 0),
+	HSPHY_INIT_CFG(0x74, 0x12, 0),
+	HSPHY_INIT_CFG(0x98, 0x63, 0),
+	HSPHY_INIT_CFG(0x9c, 0x03, 0),
+	HSPHY_INIT_CFG(0xa0, 0x1d, 0),
+	HSPHY_INIT_CFG(0xa4, 0x03, 0),
+	HSPHY_INIT_CFG(0x8c, 0x23, 0),
+	HSPHY_INIT_CFG(0x78, 0x08, 0),
+	HSPHY_INIT_CFG(0x7c, 0xdc, 0),
+	HSPHY_INIT_CFG(0x90, 0xe0, 20),
+	HSPHY_INIT_CFG(0x74, 0x10, 0),
+	HSPHY_INIT_CFG(0x90, 0x60, 0),
+};
+
+static const struct hsphy_data hsphy_data_femtophy = {
+	.init_seq = init_seq_femtophy,
+	.init_seq_num = ARRAY_SIZE(init_seq_femtophy),
+};
+
+static const struct of_device_id qcom_snps_hsphy_match[] = {
+	{ .compatible = "qcom,usb-hs-28nm-femtophy", .data = &hsphy_data_femtophy, },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_match);
+
+static struct platform_driver qcom_snps_hsphy_driver = {
+	.probe = qcom_snps_hsphy_probe,
+	.driver	= {
+		.name = "qcom,usb-hs-28nm-phy",
+		.of_match_table = qcom_snps_hsphy_match,
+	},
+};
+module_platform_driver(qcom_snps_hsphy_driver);
+
+MODULE_DESCRIPTION("Qualcomm 28nm Hi-Speed USB PHY driver");
+MODULE_LICENSE("GPL v2");

drivers/phy/qualcomm/phy-qcom-usb-ss.c

@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2012-2014,2017 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018-2020, Linaro Limited
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#define PHY_CTRL0			0x6C
+#define PHY_CTRL1			0x70
+#define PHY_CTRL2			0x74
+#define PHY_CTRL4			0x7C
+
+/* PHY_CTRL bits */
+#define REF_PHY_EN			BIT(0)
+#define LANE0_PWR_ON			BIT(2)
+#define SWI_PCS_CLK_SEL			BIT(4)
+#define TST_PWR_DOWN			BIT(4)
+#define PHY_RESET			BIT(7)
+
+#define NUM_BULK_CLKS			3
+#define NUM_BULK_REGS			2
+
+struct ssphy_priv {
+	void __iomem *base;
+	struct device *dev;
+	struct reset_control *reset_com;
+	struct reset_control *reset_phy;
+	struct regulator_bulk_data regs[NUM_BULK_REGS];
+	struct clk_bulk_data clks[NUM_BULK_CLKS];
+	enum phy_mode mode;
+};
+
+static inline void qcom_ssphy_updatel(void __iomem *addr, u32 mask, u32 val)
+{
+	writel((readl(addr) & ~mask) | val, addr);
+}
+
+static int qcom_ssphy_do_reset(struct ssphy_priv *priv)
+{
+	int ret;
+
+	if (!priv->reset_com) {
+		qcom_ssphy_updatel(priv->base + PHY_CTRL1, PHY_RESET,
+				   PHY_RESET);
+		usleep_range(10, 20);
+		qcom_ssphy_updatel(priv->base + PHY_CTRL1, PHY_RESET, 0);
+	} else {
+		ret = reset_control_assert(priv->reset_com);
+		if (ret) {
+			dev_err(priv->dev, "Failed to assert reset com\n");
+			return ret;
+		}
+
+		ret = reset_control_assert(priv->reset_phy);
+		if (ret) {
+			dev_err(priv->dev, "Failed to assert reset phy\n");
+			return ret;
+		}
+
+		usleep_range(10, 20);
+
+		ret = reset_control_deassert(priv->reset_com);
+		if (ret) {
+			dev_err(priv->dev, "Failed to deassert reset com\n");
+			return ret;
+		}
+
+		ret = reset_control_deassert(priv->reset_phy);
+		if (ret) {
+			dev_err(priv->dev, "Failed to deassert reset phy\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int qcom_ssphy_power_on(struct phy *phy)
+{
+	struct ssphy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = regulator_bulk_enable(NUM_BULK_REGS, priv->regs);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(NUM_BULK_CLKS, priv->clks);
+	if (ret)
+		goto err_disable_regulator;
+
+	ret = qcom_ssphy_do_reset(priv);
+	if (ret)
+		goto err_disable_clock;
+
+	writeb(SWI_PCS_CLK_SEL, priv->base + PHY_CTRL0);
+	qcom_ssphy_updatel(priv->base + PHY_CTRL4, LANE0_PWR_ON, LANE0_PWR_ON);
+	qcom_ssphy_updatel(priv->base + PHY_CTRL2, REF_PHY_EN, REF_PHY_EN);
+	qcom_ssphy_updatel(priv->base + PHY_CTRL4, TST_PWR_DOWN, 0);
+
+	return 0;
+err_disable_clock:
+	clk_bulk_disable_unprepare(NUM_BULK_CLKS, priv->clks);
+err_disable_regulator:
+	regulator_bulk_disable(NUM_BULK_REGS, priv->regs);
+
+	return ret;
+}
+
+static int qcom_ssphy_power_off(struct phy *phy)
+{
+	struct ssphy_priv *priv = phy_get_drvdata(phy);
+
+	qcom_ssphy_updatel(priv->base + PHY_CTRL4, LANE0_PWR_ON, 0);
+	qcom_ssphy_updatel(priv->base + PHY_CTRL2, REF_PHY_EN, 0);
+	qcom_ssphy_updatel(priv->base + PHY_CTRL4, TST_PWR_DOWN, TST_PWR_DOWN);
+
+	clk_bulk_disable_unprepare(NUM_BULK_CLKS, priv->clks);
+	regulator_bulk_disable(NUM_BULK_REGS, priv->regs);
+
+	return 0;
+}
+
+static int qcom_ssphy_init_clock(struct ssphy_priv *priv)
+{
+	priv->clks[0].id = "ref";
+	priv->clks[1].id = "ahb";
+	priv->clks[2].id = "pipe";
+
+	return devm_clk_bulk_get(priv->dev, NUM_BULK_CLKS, priv->clks);
+}
+
+static int qcom_ssphy_init_regulator(struct ssphy_priv *priv)
+{
+	int ret;
+
+	priv->regs[0].supply = "vdd";
+	priv->regs[1].supply = "vdda1p8";
+	ret = devm_regulator_bulk_get(priv->dev, NUM_BULK_REGS, priv->regs);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(priv->dev, "Failed to get regulators\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+static int qcom_ssphy_init_reset(struct ssphy_priv *priv)
+{
+	priv->reset_com = devm_reset_control_get_optional_exclusive(priv->dev, "com");
+	if (IS_ERR(priv->reset_com)) {
+		dev_err(priv->dev, "Failed to get reset control com\n");
+		return PTR_ERR(priv->reset_com);
+	}
+
+	if (priv->reset_com) {
+		/* if reset_com is present, reset_phy is no longer optional */
+		priv->reset_phy = devm_reset_control_get_exclusive(priv->dev, "phy");
+		if (IS_ERR(priv->reset_phy)) {
+			dev_err(priv->dev, "Failed to get reset control phy\n");
+			return PTR_ERR(priv->reset_phy);
+		}
+	}
+
+	return 0;
+}
+
+static const struct phy_ops qcom_ssphy_ops = {
+	.power_off = qcom_ssphy_power_off,
+	.power_on = qcom_ssphy_power_on,
+	.owner = THIS_MODULE,
+};
+
+static int qcom_ssphy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *provider;
+	struct ssphy_priv *priv;
+	struct phy *phy;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(struct ssphy_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->mode = PHY_MODE_INVALID;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	ret = qcom_ssphy_init_clock(priv);
+	if (ret)
+		return ret;
+
+	ret = qcom_ssphy_init_reset(priv);
+	if (ret)
+		return ret;
+
+	ret = qcom_ssphy_init_regulator(priv);
+	if (ret)
+		return ret;
+
+	phy = devm_phy_create(dev, dev->of_node, &qcom_ssphy_ops);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "Failed to create the SS phy\n");
+		return PTR_ERR(phy);
+	}
+
+	phy_set_drvdata(phy, priv);
+
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id qcom_ssphy_match[] = {
+	{ .compatible = "qcom,usb-ss-28nm-phy", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, qcom_ssphy_match);
+
+static struct platform_driver qcom_ssphy_driver = {
+	.probe		= qcom_ssphy_probe,
+	.driver = {
+		.name	= "qcom-usb-ssphy",
+		.of_match_table = qcom_ssphy_match,
+	},
+};
+module_platform_driver(qcom_ssphy_driver);
+
+MODULE_DESCRIPTION("Qualcomm SuperSpeed USB PHY driver");
+MODULE_LICENSE("GPL v2");

drivers/phy/rockchip/phy-rockchip-inno-usb2.c

@@ -763,7 +763,7 @@ static void rockchip_chg_detect_work(struct work_struct *work)
 		/* put the controller in normal mode */
 		property_enable(base, &rphy->phy_cfg->chg_det.opmode, true);
 		rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work);
-		dev_info(&rport->phy->dev, "charger = %s\n",
+		dev_dbg(&rport->phy->dev, "charger = %s\n",
 			 chg_to_string(rphy->chg_type));
 		return;
 	default:

drivers/phy/socionext/phy-uniphier-pcie.c

@@ -19,6 +19,10 @@
 #include <linux/resource.h>
 
 /* PHY */
+#define PCL_PHY_CLKCTRL		0x0000
+#define PORT_SEL_MASK		GENMASK(11, 9)
+#define PORT_SEL_1		FIELD_PREP(PORT_SEL_MASK, 1)
+
 #define PCL_PHY_TEST_I		0x2000
 #define PCL_PHY_TEST_O		0x2004
 #define TESTI_DAT_MASK		GENMASK(13, 6)
@@ -45,13 +49,14 @@
 struct uniphier_pciephy_priv {
 	void __iomem *base;
 	struct device *dev;
-	struct clk *clk;
+	struct clk *clk, *clk_gio;
-	struct reset_control *rst;
+	struct reset_control *rst, *rst_gio;
 	const struct uniphier_pciephy_soc_data *data;
 };
 
 struct uniphier_pciephy_soc_data {
-	bool has_syscon;
+	bool is_legacy;
+	void (*set_phymode)(struct regmap *regmap);
 };
 
 static void uniphier_pciephy_testio_write(struct uniphier_pciephy_priv *priv,
@@ -111,16 +116,35 @@ static void uniphier_pciephy_deassert(struct uniphier_pciephy_priv *priv)
 static int uniphier_pciephy_init(struct phy *phy)
 {
 	struct uniphier_pciephy_priv *priv = phy_get_drvdata(phy);
+	u32 val;
 	int ret;
 
 	ret = clk_prepare_enable(priv->clk);
 	if (ret)
 		return ret;
 
-	ret = reset_control_deassert(priv->rst);
+	ret = clk_prepare_enable(priv->clk_gio);
 	if (ret)
 		goto out_clk_disable;
 
+	ret = reset_control_deassert(priv->rst);
+	if (ret)
+		goto out_clk_gio_disable;
+
+	ret = reset_control_deassert(priv->rst_gio);
+	if (ret)
+		goto out_rst_assert;
+
+	/* support only 1 port */
+	val = readl(priv->base + PCL_PHY_CLKCTRL);
+	val &= ~PORT_SEL_MASK;
+	val |= PORT_SEL_1;
+	writel(val, priv->base + PCL_PHY_CLKCTRL);
+
+	/* legacy controller doesn't have phy_reset and parameters */
+	if (priv->data->is_legacy)
+		return 0;
+
 	uniphier_pciephy_set_param(priv, PCL_PHY_R00,
 				   RX_EQ_ADJ_EN, RX_EQ_ADJ_EN);
 	uniphier_pciephy_set_param(priv, PCL_PHY_R06, RX_EQ_ADJ,
@@ -134,6 +158,10 @@ static int uniphier_pciephy_init(struct phy *phy)
 
 	return 0;
 
+out_rst_assert:
+	reset_control_assert(priv->rst);
+out_clk_gio_disable:
+	clk_disable_unprepare(priv->clk_gio);
 out_clk_disable:
 	clk_disable_unprepare(priv->clk);
 
@@ -144,8 +172,11 @@ static int uniphier_pciephy_exit(struct phy *phy)
 {
 	struct uniphier_pciephy_priv *priv = phy_get_drvdata(phy);
 
-	uniphier_pciephy_assert(priv);
+	if (!priv->data->is_legacy)
+		uniphier_pciephy_assert(priv);
+	reset_control_assert(priv->rst_gio);
 	reset_control_assert(priv->rst);
+	clk_disable_unprepare(priv->clk_gio);
 	clk_disable_unprepare(priv->clk);
 
 	return 0;
@@ -163,7 +194,6 @@ static int uniphier_pciephy_probe(struct platform_device *pdev)
 	struct phy_provider *phy_provider;
 	struct device *dev = &pdev->dev;
 	struct regmap *regmap;
-	struct resource *res;
 	struct phy *phy;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -176,18 +206,36 @@ static int uniphier_pciephy_probe(struct platform_device *pdev)
 
 	priv->dev = dev;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
-	priv->base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);
 
-	priv->clk = devm_clk_get(dev, NULL);
+	if (priv->data->is_legacy) {
-	if (IS_ERR(priv->clk))
+		priv->clk_gio = devm_clk_get(dev, "gio");
-		return PTR_ERR(priv->clk);
+		if (IS_ERR(priv->clk_gio))
+			return PTR_ERR(priv->clk_gio);
 
-	priv->rst = devm_reset_control_get_shared(dev, NULL);
+		priv->rst_gio =
-	if (IS_ERR(priv->rst))
+			devm_reset_control_get_shared(dev, "gio");
-		return PTR_ERR(priv->rst);
+		if (IS_ERR(priv->rst_gio))
+			return PTR_ERR(priv->rst_gio);
+
+		priv->clk = devm_clk_get(dev, "link");
+		if (IS_ERR(priv->clk))
+			return PTR_ERR(priv->clk);
+
+		priv->rst = devm_reset_control_get_shared(dev, "link");
+		if (IS_ERR(priv->rst))
+			return PTR_ERR(priv->rst);
+	} else {
+		priv->clk = devm_clk_get(dev, NULL);
+		if (IS_ERR(priv->clk))
+			return PTR_ERR(priv->clk);
+
+		priv->rst = devm_reset_control_get_shared(dev, NULL);
+		if (IS_ERR(priv->rst))
+			return PTR_ERR(priv->rst);
+	}
 
 	phy = devm_phy_create(dev, dev->of_node, &uniphier_pciephy_ops);
 	if (IS_ERR(phy))
@@ -195,9 +243,8 @@ static int uniphier_pciephy_probe(struct platform_device *pdev)
 
 	regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
 						 "socionext,syscon");
-	if (!IS_ERR(regmap) && priv->data->has_syscon)
+	if (!IS_ERR(regmap) && priv->data->set_phymode)
-		regmap_update_bits(regmap, SG_USBPCIESEL,
+		priv->data->set_phymode(regmap);
-				   SG_USBPCIESEL_PCIE, SG_USBPCIESEL_PCIE);
 
 	phy_set_drvdata(phy, priv);
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
@@ -205,15 +252,30 @@ static int uniphier_pciephy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
+static void uniphier_pciephy_ld20_setmode(struct regmap *regmap)
+{
+	regmap_update_bits(regmap, SG_USBPCIESEL,
+			   SG_USBPCIESEL_PCIE, SG_USBPCIESEL_PCIE);
+}
+
+static const struct uniphier_pciephy_soc_data uniphier_pro5_data = {
+	.is_legacy = true,
+};
+
 static const struct uniphier_pciephy_soc_data uniphier_ld20_data = {
-	.has_syscon = true,
+	.is_legacy = false,
+	.set_phymode = uniphier_pciephy_ld20_setmode,
 };
 
 static const struct uniphier_pciephy_soc_data uniphier_pxs3_data = {
-	.has_syscon = false,
+	.is_legacy = false,
 };
 
 static const struct of_device_id uniphier_pciephy_match[] = {
+	{
+		.compatible = "socionext,uniphier-pro5-pcie-phy",
+		.data = &uniphier_pro5_data,
+	},
 	{
 		.compatible = "socionext,uniphier-ld20-pcie-phy",
 		.data = &uniphier_ld20_data,

drivers/phy/socionext/phy-uniphier-usb3hs.c

@@ -41,10 +41,12 @@
 
 #define PHY_F(regno, msb, lsb) { (regno), (msb), (lsb) }
 
+#define RX_CHK_SYNC	PHY_F(0, 5, 5)	/* RX sync mode */
+#define RX_SYNC_SEL	PHY_F(1, 1, 0)	/* RX sync length */
 #define LS_SLEW		PHY_F(10, 6, 6)	/* LS mode slew rate */
 #define FS_LS_DRV	PHY_F(10, 5, 5)	/* FS/LS slew rate */
 
-#define MAX_PHY_PARAMS	2
+#define MAX_PHY_PARAMS	4
 
 struct uniphier_u3hsphy_param {
 	struct {
@@ -66,13 +68,14 @@ struct uniphier_u3hsphy_trim_param {
 struct uniphier_u3hsphy_priv {
 	struct device *dev;
 	void __iomem *base;
-	struct clk *clk, *clk_parent, *clk_ext;
+	struct clk *clk, *clk_parent, *clk_ext, *clk_parent_gio;
-	struct reset_control *rst, *rst_parent;
+	struct reset_control *rst, *rst_parent, *rst_parent_gio;
 	struct regulator *vbus;
 	const struct uniphier_u3hsphy_soc_data *data;
 };
 
 struct uniphier_u3hsphy_soc_data {
+	bool is_legacy;
 	int nparams;
 	const struct uniphier_u3hsphy_param param[MAX_PHY_PARAMS];
 	u32 config0;
@@ -256,11 +259,20 @@ static int uniphier_u3hsphy_init(struct phy *phy)
 	if (ret)
 		return ret;
 
-	ret = reset_control_deassert(priv->rst_parent);
+	ret = clk_prepare_enable(priv->clk_parent_gio);
 	if (ret)
 		goto out_clk_disable;
 
-	if (!priv->data->config0 && !priv->data->config1)
+	ret = reset_control_deassert(priv->rst_parent);
+	if (ret)
+		goto out_clk_gio_disable;
+
+	ret = reset_control_deassert(priv->rst_parent_gio);
+	if (ret)
+		goto out_rst_assert;
+
+	if ((priv->data->is_legacy)
+	    || (!priv->data->config0 && !priv->data->config1))
 		return 0;
 
 	config0 = priv->data->config0;
@@ -280,6 +292,8 @@ static int uniphier_u3hsphy_init(struct phy *phy)
 
 out_rst_assert:
 	reset_control_assert(priv->rst_parent);
+out_clk_gio_disable:
+	clk_disable_unprepare(priv->clk_parent_gio);
 out_clk_disable:
 	clk_disable_unprepare(priv->clk_parent);
 
@@ -290,7 +304,9 @@ static int uniphier_u3hsphy_exit(struct phy *phy)
 {
 	struct uniphier_u3hsphy_priv *priv = phy_get_drvdata(phy);
 
+	reset_control_assert(priv->rst_parent_gio);
 	reset_control_assert(priv->rst_parent);
+	clk_disable_unprepare(priv->clk_parent_gio);
 	clk_disable_unprepare(priv->clk_parent);
 
 	return 0;
@@ -309,7 +325,6 @@ static int uniphier_u3hsphy_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct uniphier_u3hsphy_priv *priv;
 	struct phy_provider *phy_provider;
-	struct resource *res;
 	struct phy *phy;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -322,27 +337,38 @@ static int uniphier_u3hsphy_probe(struct platform_device *pdev)
 		    priv->data->nparams > MAX_PHY_PARAMS))
 		return -EINVAL;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
-	priv->base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);
 
-	priv->clk = devm_clk_get(dev, "phy");
+	if (!priv->data->is_legacy) {
-	if (IS_ERR(priv->clk))
+		priv->clk = devm_clk_get(dev, "phy");
-		return PTR_ERR(priv->clk);
+		if (IS_ERR(priv->clk))
+			return PTR_ERR(priv->clk);
+
+		priv->clk_ext = devm_clk_get_optional(dev, "phy-ext");
+		if (IS_ERR(priv->clk_ext))
+			return PTR_ERR(priv->clk_ext);
+
+		priv->rst = devm_reset_control_get_shared(dev, "phy");
+		if (IS_ERR(priv->rst))
+			return PTR_ERR(priv->rst);
+
+	} else {
+		priv->clk_parent_gio = devm_clk_get(dev, "gio");
+		if (IS_ERR(priv->clk_parent_gio))
+			return PTR_ERR(priv->clk_parent_gio);
+
+		priv->rst_parent_gio =
+			devm_reset_control_get_shared(dev, "gio");
+		if (IS_ERR(priv->rst_parent_gio))
+			return PTR_ERR(priv->rst_parent_gio);
+	}
 
 	priv->clk_parent = devm_clk_get(dev, "link");
 	if (IS_ERR(priv->clk_parent))
 		return PTR_ERR(priv->clk_parent);
 
-	priv->clk_ext = devm_clk_get_optional(dev, "phy-ext");
-	if (IS_ERR(priv->clk_ext))
-		return PTR_ERR(priv->clk_ext);
-
-	priv->rst = devm_reset_control_get_shared(dev, "phy");
-	if (IS_ERR(priv->rst))
-		return PTR_ERR(priv->rst);
-
 	priv->rst_parent = devm_reset_control_get_shared(dev, "link");
 	if (IS_ERR(priv->rst_parent))
 		return PTR_ERR(priv->rst_parent);
@@ -364,13 +390,26 @@ static int uniphier_u3hsphy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
-static const struct uniphier_u3hsphy_soc_data uniphier_pxs2_data = {
+static const struct uniphier_u3hsphy_soc_data uniphier_pro5_data = {
+	.is_legacy = true,
 	.nparams = 0,
 };
 
-static const struct uniphier_u3hsphy_soc_data uniphier_ld20_data = {
+static const struct uniphier_u3hsphy_soc_data uniphier_pxs2_data = {
+	.is_legacy = false,
 	.nparams = 2,
 	.param = {
+		{ RX_CHK_SYNC, 1 },
+		{ RX_SYNC_SEL, 1 },
+	},
+};
+
+static const struct uniphier_u3hsphy_soc_data uniphier_ld20_data = {
+	.is_legacy = false,
+	.nparams = 4,
+	.param = {
+		{ RX_CHK_SYNC, 1 },
+		{ RX_SYNC_SEL, 1 },
 		{ LS_SLEW, 1 },
 		{ FS_LS_DRV, 1 },
 	},
@@ -380,13 +419,22 @@ static const struct uniphier_u3hsphy_soc_data uniphier_ld20_data = {
 };
 
 static const struct uniphier_u3hsphy_soc_data uniphier_pxs3_data = {
-	.nparams = 0,
+	.is_legacy = false,
+	.nparams = 2,
+	.param = {
+		{ RX_CHK_SYNC, 1 },
+		{ RX_SYNC_SEL, 1 },
+	},
 	.trim_func = uniphier_u3hsphy_trim_ld20,
 	.config0 = 0x92316680,
 	.config1 = 0x00000106,
 };
 
 static const struct of_device_id uniphier_u3hsphy_match[] = {
+	{
+		.compatible = "socionext,uniphier-pro5-usb3-hsphy",
+		.data = &uniphier_pro5_data,
+	},
 	{
 		.compatible = "socionext,uniphier-pxs2-usb3-hsphy",
 		.data = &uniphier_pxs2_data,

drivers/phy/socionext/phy-uniphier-usb3ss.c

@@ -215,7 +215,6 @@ static int uniphier_u3ssphy_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct uniphier_u3ssphy_priv *priv;
 	struct phy_provider *phy_provider;
-	struct resource *res;
 	struct phy *phy;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -228,8 +227,7 @@ static int uniphier_u3ssphy_probe(struct platform_device *pdev)
 		    priv->data->nparams > MAX_PHY_PARAMS))
 		return -EINVAL;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
-	priv->base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);
 
@@ -314,6 +312,10 @@ static const struct of_device_id uniphier_u3ssphy_match[] = {
 		.compatible = "socionext,uniphier-pro4-usb3-ssphy",
 		.data = &uniphier_pro4_data,
 	},
+	{
+		.compatible = "socionext,uniphier-pro5-usb3-ssphy",
+		.data = &uniphier_pro4_data,
+	},
 	{
 		.compatible = "socionext,uniphier-pxs2-usb3-ssphy",
 		.data = &uniphier_pxs2_data,

drivers/phy/ti/phy-gmii-sel.c

@@ -170,6 +170,21 @@ struct phy_gmii_sel_soc_data phy_gmii_sel_soc_dm814 = {
 	.regfields = phy_gmii_sel_fields_am33xx,
 };
 
+static const
+struct reg_field phy_gmii_sel_fields_am654[][PHY_GMII_SEL_LAST] = {
+	{
+		[PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x4040, 0, 1),
+		[PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD((~0), 0, 0),
+		[PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD((~0), 0, 0),
+	},
+};
+
+static const
+struct phy_gmii_sel_soc_data phy_gmii_sel_soc_am654 = {
+	.num_ports = 1,
+	.regfields = phy_gmii_sel_fields_am654,
+};
+
 static const struct of_device_id phy_gmii_sel_id_table[] = {
 	{
 		.compatible	= "ti,am3352-phy-gmii-sel",
@@ -187,6 +202,10 @@ static const struct of_device_id phy_gmii_sel_id_table[] = {
 		.compatible	= "ti,dm814-phy-gmii-sel",
 		.data		= &phy_gmii_sel_soc_dm814,
 	},
+	{
+		.compatible	= "ti,am654-phy-gmii-sel",
+		.data		= &phy_gmii_sel_soc_am654,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, phy_gmii_sel_id_table);