Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (w83627hf) Fix for "No such device"
  hwmon: (sht15) Off-by-one error in array index + incorrect constants
  hwmon: Add driver for VIA CPU core temperature
  hwmon: (smsc47m1) Enable device if needed
  hwmon: (smsc47m1) Fail module loading on error
  hwmon: (smsc47m1) Only request I/O ports we really use
  hwmon: New driver for AMD Family 10h/11h CPUs

Documentation/hwmon/k10temp

@@ -0,0 +1,60 @@
+Kernel driver k10temp
+=====================
+
+Supported chips:
+* AMD Family 10h processors:
+  Socket F: Quad-Core/Six-Core/Embedded Opteron
+  Socket AM2+: Opteron, Phenom (II) X3/X4
+  Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II
+  Socket S1G3: Athlon II, Sempron, Turion II
+* AMD Family 11h processors:
+  Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+
+  Prefix: 'k10temp'
+  Addresses scanned: PCI space
+  Datasheets:
+  BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h Processors:
+    http://support.amd.com/us/Processor_TechDocs/31116.pdf
+  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
+    http://support.amd.com/us/Processor_TechDocs/41256.pdf
+  Revision Guide for AMD Family 10h Processors:
+    http://support.amd.com/us/Processor_TechDocs/41322.pdf
+  Revision Guide for AMD Family 11h Processors:
+    http://support.amd.com/us/Processor_TechDocs/41788.pdf
+  AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
+    http://support.amd.com/us/Processor_TechDocs/43373.pdf
+  AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
+    http://support.amd.com/us/Processor_TechDocs/43374.pdf
+  AMD Family 10h Desktop Processor Power and Thermal Data Sheet:
+    http://support.amd.com/us/Processor_TechDocs/43375.pdf
+
+Author: Clemens Ladisch <clemens@ladisch.de>
+
+Description
+-----------
+
+This driver permits reading of the internal temperature sensor of AMD
+Family 10h and 11h processors.
+
+All these processors have a sensor, but on older revisions of Family 10h
+processors, the sensor may return inconsistent values (erratum 319). The
+driver will refuse to load on these revisions unless you specify the
+"force=1" module parameter.
+
+There is one temperature measurement value, available as temp1_input in
+sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree.
+Please note that it is defined as a relative value; to quote the AMD manual:
+
+  Tctl is the processor temperature control value, used by the platform to
+  control cooling systems. Tctl is a non-physical temperature on an
+  arbitrary scale measured in degrees. It does _not_ represent an actual
+  physical temperature like die or case temperature. Instead, it specifies
+  the processor temperature relative to the point at which the system must
+  supply the maximum cooling for the processor's specified maximum case
+  temperature and maximum thermal power dissipation.
+
+The maximum value for Tctl is available in the file temp1_max.
+
+If the BIOS has enabled hardware temperature control, the threshold at
+which the processor will throttle itself to avoid damage is available in
+temp1_crit and temp1_crit_hyst.

drivers/hwmon/Kconfig

@@ -228,6 +228,18 @@ config SENSORS_K8TEMP
 	  This driver can also be built as a module.  If so, the module
 	  will be called k8temp.
 
+config SENSORS_K10TEMP
+	tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
+	depends on X86 && PCI
+	help
+	  If you say yes here you get support for the temperature
+	  sensor(s) inside your CPU. Supported are later revisions of
+	  the AMD Family 10h and all revisions of the AMD Family 11h
+	  microarchitectures.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called k10temp.
+
 config SENSORS_AMS
 	tristate "Apple Motion Sensor driver"
 	depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
@@ -810,6 +822,14 @@ config SENSORS_TMP421
 	  This driver can also be built as a module.  If so, the module
 	  will be called tmp421.
 
+config SENSORS_VIA_CPUTEMP
+	tristate "VIA CPU temperature sensor"
+	depends on X86
+	help
+	  If you say yes here you get support for the temperature
+	  sensor inside your CPU. Supported are all known variants of
+	  the VIA C7 and Nano.
+
 config SENSORS_VIA686A
 	tristate "VIA686A"
 	depends on PCI

drivers/hwmon/Makefile

@@ -53,6 +53,7 @@ obj-$(CONFIG_SENSORS_IBMAEM)	+= ibmaem.o
 obj-$(CONFIG_SENSORS_IBMPEX)	+= ibmpex.o
 obj-$(CONFIG_SENSORS_IT87)	+= it87.o
 obj-$(CONFIG_SENSORS_K8TEMP)	+= k8temp.o
+obj-$(CONFIG_SENSORS_K10TEMP)	+= k10temp.o
 obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o
 obj-$(CONFIG_SENSORS_LIS3_SPI)	+= lis3lv02d.o lis3lv02d_spi.o
 obj-$(CONFIG_SENSORS_LIS3_I2C)	+= lis3lv02d.o lis3lv02d_i2c.o
@@ -88,6 +89,7 @@ obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
 obj-$(CONFIG_SENSORS_THMC50)	+= thmc50.o
 obj-$(CONFIG_SENSORS_TMP401)	+= tmp401.o
 obj-$(CONFIG_SENSORS_TMP421)	+= tmp421.o
+obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o
 obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o
 obj-$(CONFIG_SENSORS_VT1211)	+= vt1211.o
 obj-$(CONFIG_SENSORS_VT8231)	+= vt8231.o

drivers/hwmon/k10temp.c

@@ -0,0 +1,197 @@
+/*
+ * k10temp.c - AMD Family 10h/11h processor hardware monitoring
+ *
+ * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
+ *
+ *
+ * This driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this driver; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <asm/processor.h>
+
+MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor");
+MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
+MODULE_LICENSE("GPL");
+
+static bool force;
+module_param(force, bool, 0444);
+MODULE_PARM_DESC(force, "force loading on processors with erratum 319");
+
+#define REG_HARDWARE_THERMAL_CONTROL	0x64
+#define  HTC_ENABLE			0x00000001
+
+#define REG_REPORTED_TEMPERATURE	0xa4
+
+#define REG_NORTHBRIDGE_CAPABILITIES	0xe8
+#define  NB_CAP_HTC			0x00000400
+
+static ssize_t show_temp(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	u32 regval;
+
+	pci_read_config_dword(to_pci_dev(dev),
+			      REG_REPORTED_TEMPERATURE, &regval);
+	return sprintf(buf, "%u\n", (regval >> 21) * 125);
+}
+
+static ssize_t show_temp_max(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n", 70 * 1000);
+}
+
+static ssize_t show_temp_crit(struct device *dev,
+			      struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int show_hyst = attr->index;
+	u32 regval;
+	int value;
+
+	pci_read_config_dword(to_pci_dev(dev),
+			      REG_HARDWARE_THERMAL_CONTROL, &regval);
+	value = ((regval >> 16) & 0x7f) * 500 + 52000;
+	if (show_hyst)
+		value -= ((regval >> 24) & 0xf) * 500;
+	return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t show_name(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "k10temp\n");
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, NULL);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit, NULL, 1);
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+static bool __devinit has_erratum_319(void)
+{
+	/*
+	 * Erratum 319: The thermal sensor of older Family 10h processors
+	 *              (B steppings) may be unreliable.
+	 */
+	return boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model <= 2;
+}
+
+static int __devinit k10temp_probe(struct pci_dev *pdev,
+				   const struct pci_device_id *id)
+{
+	struct device *hwmon_dev;
+	u32 reg_caps, reg_htc;
+	int err;
+
+	if (has_erratum_319() && !force) {
+		dev_err(&pdev->dev,
+			"unreliable CPU thermal sensor; monitoring disabled\n");
+		err = -ENODEV;
+		goto exit;
+	}
+
+	err = device_create_file(&pdev->dev, &dev_attr_temp1_input);
+	if (err)
+		goto exit;
+	err = device_create_file(&pdev->dev, &dev_attr_temp1_max);
+	if (err)
+		goto exit_remove;
+
+	pci_read_config_dword(pdev, REG_NORTHBRIDGE_CAPABILITIES, &reg_caps);
+	pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, &reg_htc);
+	if ((reg_caps & NB_CAP_HTC) && (reg_htc & HTC_ENABLE)) {
+		err = device_create_file(&pdev->dev,
+				&sensor_dev_attr_temp1_crit.dev_attr);
+		if (err)
+			goto exit_remove;
+		err = device_create_file(&pdev->dev,
+				&sensor_dev_attr_temp1_crit_hyst.dev_attr);
+		if (err)
+			goto exit_remove;
+	}
+
+	err = device_create_file(&pdev->dev, &dev_attr_name);
+	if (err)
+		goto exit_remove;
+
+	hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(hwmon_dev)) {
+		err = PTR_ERR(hwmon_dev);
+		goto exit_remove;
+	}
+	dev_set_drvdata(&pdev->dev, hwmon_dev);
+
+	if (has_erratum_319() && force)
+		dev_warn(&pdev->dev,
+			 "unreliable CPU thermal sensor; check erratum 319\n");
+	return 0;
+
+exit_remove:
+	device_remove_file(&pdev->dev, &dev_attr_name);
+	device_remove_file(&pdev->dev, &dev_attr_temp1_input);
+	device_remove_file(&pdev->dev, &dev_attr_temp1_max);
+	device_remove_file(&pdev->dev,
+			   &sensor_dev_attr_temp1_crit.dev_attr);
+	device_remove_file(&pdev->dev,
+			   &sensor_dev_attr_temp1_crit_hyst.dev_attr);
+exit:
+	return err;
+}
+
+static void __devexit k10temp_remove(struct pci_dev *pdev)
+{
+	hwmon_device_unregister(dev_get_drvdata(&pdev->dev));
+	device_remove_file(&pdev->dev, &dev_attr_name);
+	device_remove_file(&pdev->dev, &dev_attr_temp1_input);
+	device_remove_file(&pdev->dev, &dev_attr_temp1_max);
+	device_remove_file(&pdev->dev,
+			   &sensor_dev_attr_temp1_crit.dev_attr);
+	device_remove_file(&pdev->dev,
+			   &sensor_dev_attr_temp1_crit_hyst.dev_attr);
+	dev_set_drvdata(&pdev->dev, NULL);
+}
+
+static struct pci_device_id k10temp_id_table[] = {
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
+	{}
+};
+MODULE_DEVICE_TABLE(pci, k10temp_id_table);
+
+static struct pci_driver k10temp_driver = {
+	.name = "k10temp",
+	.id_table = k10temp_id_table,
+	.probe = k10temp_probe,
+	.remove = __devexit_p(k10temp_remove),
+};
+
+static int __init k10temp_init(void)
+{
+	return pci_register_driver(&k10temp_driver);
+}
+
+static void __exit k10temp_exit(void)
+{
+	pci_unregister_driver(&k10temp_driver);
+}
+
+module_init(k10temp_init)
+module_exit(k10temp_exit)

drivers/hwmon/sht15.c

@@ -305,7 +305,7 @@ static inline int sht15_calc_temp(struct sht15_data *data)
 	int d1 = 0;
 	int i;
 
-	for (i = 1; i < ARRAY_SIZE(temppoints) - 1; i++)
+	for (i = 1; i < ARRAY_SIZE(temppoints); i++)
 		/* Find pointer to interpolate */
 		if (data->supply_uV > temppoints[i - 1].vdd) {
 			d1 = (data->supply_uV/1000 - temppoints[i - 1].vdd)
@@ -332,12 +332,12 @@ static inline int sht15_calc_humid(struct sht15_data *data)
 
 	const int c1 = -4;
 	const int c2 = 40500; /* x 10 ^ -6 */
-	const int c3 = 2800; /* x10 ^ -9 */
+	const int c3 = -2800; /* x10 ^ -9 */
 
 	RHlinear = c1*1000
 		+ c2 * data->val_humid/1000
 		+ (data->val_humid * data->val_humid * c3)/1000000;
-	return (temp - 25000) * (10000 + 800 * data->val_humid)
+	return (temp - 25000) * (10000 + 80 * data->val_humid)
 		/ 1000000 + RHlinear;
 }
 

drivers/hwmon/smsc47m1.c

@@ -136,11 +136,11 @@ struct smsc47m1_data {
 
 struct smsc47m1_sio_data {
 	enum chips type;
+	u8 activate;		/* Remember initial device state */
 };
 
 
-static int smsc47m1_probe(struct platform_device *pdev);
+static int __exit smsc47m1_remove(struct platform_device *pdev);
-static int __devexit smsc47m1_remove(struct platform_device *pdev);
 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
 		int init);
 
@@ -160,8 +160,7 @@ static struct platform_driver smsc47m1_driver = {
 		.owner	= THIS_MODULE,
 		.name	= DRVNAME,
 	},
-	.probe		= smsc47m1_probe,
+	.remove		= __exit_p(smsc47m1_remove),
-	.remove		= __devexit_p(smsc47m1_remove),
 };
 
 static ssize_t get_fan(struct device *dev, struct device_attribute
@@ -470,24 +469,126 @@ static int __init smsc47m1_find(unsigned short *addr,
 	superio_select();
 	*addr = (superio_inb(SUPERIO_REG_BASE) << 8)
 	      |  superio_inb(SUPERIO_REG_BASE + 1);
-	val = superio_inb(SUPERIO_REG_ACT);
+	if (*addr == 0) {
-	if (*addr == 0 || (val & 0x01) == 0) {
+		pr_info(DRVNAME ": Device address not set, will not use\n");
-		pr_info(DRVNAME ": Device is disabled, will not use\n");
 		superio_exit();
 		return -ENODEV;
 	}
 
+	/* Enable only if address is set (needed at least on the
+	 * Compaq Presario S4000NX) */
+	sio_data->activate = superio_inb(SUPERIO_REG_ACT);
+	if ((sio_data->activate & 0x01) == 0) {
+		pr_info(DRVNAME ": Enabling device\n");
+		superio_outb(SUPERIO_REG_ACT, sio_data->activate | 0x01);
+	}
+
 	superio_exit();
 	return 0;
 }
 
-static int __devinit smsc47m1_probe(struct platform_device *pdev)
+/* Restore device to its initial state */
+static void __init smsc47m1_restore(const struct smsc47m1_sio_data *sio_data)
+{
+	if ((sio_data->activate & 0x01) == 0) {
+		superio_enter();
+		superio_select();
+
+		pr_info(DRVNAME ": Disabling device\n");
+		superio_outb(SUPERIO_REG_ACT, sio_data->activate);
+
+		superio_exit();
+	}
+}
+
+#define CHECK		1
+#define REQUEST		2
+#define RELEASE		3
+
+/*
+ * This function can be used to:
+ *  - test for resource conflicts with ACPI
+ *  - request the resources
+ *  - release the resources
+ * We only allocate the I/O ports we really need, to minimize the risk of
+ * conflicts with ACPI or with other drivers.
+ */
+static int smsc47m1_handle_resources(unsigned short address, enum chips type,
+				     int action, struct device *dev)
+{
+	static const u8 ports_m1[] = {
+		/* register, region length */
+		0x04, 1,
+		0x33, 4,
+		0x56, 7,
+	};
+
+	static const u8 ports_m2[] = {
+		/* register, region length */
+		0x04, 1,
+		0x09, 1,
+		0x2c, 2,
+		0x35, 4,
+		0x56, 7,
+		0x69, 4,
+	};
+
+	int i, ports_size, err;
+	const u8 *ports;
+
+	switch (type) {
+	case smsc47m1:
+	default:
+		ports = ports_m1;
+		ports_size = ARRAY_SIZE(ports_m1);
+		break;
+	case smsc47m2:
+		ports = ports_m2;
+		ports_size = ARRAY_SIZE(ports_m2);
+		break;
+	}
+
+	for (i = 0; i + 1 < ports_size; i += 2) {
+		unsigned short start = address + ports[i];
+		unsigned short len = ports[i + 1];
+
+		switch (action) {
+		case CHECK:
+			/* Only check for conflicts */
+			err = acpi_check_region(start, len, DRVNAME);
+			if (err)
+				return err;
+			break;
+		case REQUEST:
+			/* Request the resources */
+			if (!request_region(start, len, DRVNAME)) {
+				dev_err(dev, "Region 0x%hx-0x%hx already in "
+					"use!\n", start, start + len);
+
+				/* Undo all requests */
+				for (i -= 2; i >= 0; i -= 2)
+					release_region(address + ports[i],
+						       ports[i + 1]);
+				return -EBUSY;
+			}
+			break;
+		case RELEASE:
+			/* Release the resources */
+			release_region(start, len);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int __init smsc47m1_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct smsc47m1_sio_data *sio_data = dev->platform_data;
 	struct smsc47m1_data *data;
 	struct resource *res;
-	int err = 0;
+	int err;
 	int fan1, fan2, fan3, pwm1, pwm2, pwm3;
 
 	static const char *names[] = {
@@ -496,12 +597,10 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev)
 	};
 
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	if (!request_region(res->start, SMSC_EXTENT, DRVNAME)) {
+	err = smsc47m1_handle_resources(res->start, sio_data->type,
-		dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
+					REQUEST, dev);
-			(unsigned long)res->start,
+	if (err < 0)
-			(unsigned long)res->end);
+		return err;
-		return -EBUSY;
-	}
 
 	if (!(data = kzalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) {
 		err = -ENOMEM;
@@ -637,11 +736,11 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 	kfree(data);
 error_release:
-	release_region(res->start, SMSC_EXTENT);
+	smsc47m1_handle_resources(res->start, sio_data->type, RELEASE, dev);
 	return err;
 }
 
-static int __devexit smsc47m1_remove(struct platform_device *pdev)
+static int __exit smsc47m1_remove(struct platform_device *pdev)
 {
 	struct smsc47m1_data *data = platform_get_drvdata(pdev);
 	struct resource *res;
@@ -650,7 +749,7 @@ static int __devexit smsc47m1_remove(struct platform_device *pdev)
 	sysfs_remove_group(&pdev->dev.kobj, &smsc47m1_group);
 
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	release_region(res->start, SMSC_EXTENT);
+	smsc47m1_handle_resources(res->start, data->type, RELEASE, &pdev->dev);
 	platform_set_drvdata(pdev, NULL);
 	kfree(data);
 
@@ -717,7 +816,7 @@ static int __init smsc47m1_device_add(unsigned short address,
 	};
 	int err;
 
-	err = acpi_check_resource_conflict(&res);
+	err = smsc47m1_handle_resources(address, sio_data->type, CHECK, NULL);
 	if (err)
 		goto exit;
 
@@ -766,27 +865,29 @@ static int __init sm_smsc47m1_init(void)
 	if (smsc47m1_find(&address, &sio_data))
 		return -ENODEV;
 
-	err = platform_driver_register(&smsc47m1_driver);
-	if (err)
-		goto exit;
-
 	/* Sets global pdev as a side effect */
 	err = smsc47m1_device_add(address, &sio_data);
 	if (err)
-		goto exit_driver;
+		goto exit;
+
+	err = platform_driver_probe(&smsc47m1_driver, smsc47m1_probe);
+	if (err)
+		goto exit_device;
 
 	return 0;
 
-exit_driver:
+exit_device:
-	platform_driver_unregister(&smsc47m1_driver);
+	platform_device_unregister(pdev);
+	smsc47m1_restore(&sio_data);
 exit:
 	return err;
 }
 
 static void __exit sm_smsc47m1_exit(void)
 {
-	platform_device_unregister(pdev);
 	platform_driver_unregister(&smsc47m1_driver);
+	smsc47m1_restore(pdev->dev.platform_data);
+	platform_device_unregister(pdev);
 }
 
 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");

drivers/hwmon/via-cputemp.c

@@ -0,0 +1,356 @@
+/*
+ * via-cputemp.c - Driver for VIA CPU core temperature monitoring
+ * Copyright (C) 2009 VIA Technologies, Inc.
+ *
+ * based on existing coretemp.c, which is
+ *
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301 USA.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/hwmon.h>
+#include <linux/sysfs.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+#include <linux/cpu.h>
+#include <asm/msr.h>
+#include <asm/processor.h>
+
+#define DRVNAME	"via_cputemp"
+
+enum { SHOW_TEMP, SHOW_LABEL, SHOW_NAME } SHOW;
+
+/*
+ * Functions declaration
+ */
+
+struct via_cputemp_data {
+	struct device *hwmon_dev;
+	const char *name;
+	u32 id;
+	u32 msr;
+};
+
+/*
+ * Sysfs stuff
+ */
+
+static ssize_t show_name(struct device *dev, struct device_attribute
+			  *devattr, char *buf)
+{
+	int ret;
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct via_cputemp_data *data = dev_get_drvdata(dev);
+
+	if (attr->index == SHOW_NAME)
+		ret = sprintf(buf, "%s\n", data->name);
+	else	/* show label */
+		ret = sprintf(buf, "Core %d\n", data->id);
+	return ret;
+}
+
+static ssize_t show_temp(struct device *dev,
+			 struct device_attribute *devattr, char *buf)
+{
+	struct via_cputemp_data *data = dev_get_drvdata(dev);
+	u32 eax, edx;
+	int err;
+
+	err = rdmsr_safe_on_cpu(data->id, data->msr, &eax, &edx);
+	if (err)
+		return -EAGAIN;
+
+	return sprintf(buf, "%lu\n", ((unsigned long)eax & 0xffffff) * 1000);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL,
+			  SHOW_TEMP);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_name, NULL, SHOW_LABEL);
+static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, SHOW_NAME);
+
+static struct attribute *via_cputemp_attributes[] = {
+	&sensor_dev_attr_name.dev_attr.attr,
+	&sensor_dev_attr_temp1_label.dev_attr.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group via_cputemp_group = {
+	.attrs = via_cputemp_attributes,
+};
+
+static int __devinit via_cputemp_probe(struct platform_device *pdev)
+{
+	struct via_cputemp_data *data;
+	struct cpuinfo_x86 *c = &cpu_data(pdev->id);
+	int err;
+	u32 eax, edx;
+
+	data = kzalloc(sizeof(struct via_cputemp_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		dev_err(&pdev->dev, "Out of memory\n");
+		goto exit;
+	}
+
+	data->id = pdev->id;
+	data->name = "via_cputemp";
+
+	switch (c->x86_model) {
+	case 0xA:
+		/* C7 A */
+	case 0xD:
+		/* C7 D */
+		data->msr = 0x1169;
+		break;
+	case 0xF:
+		/* Nano */
+		data->msr = 0x1423;
+		break;
+	default:
+		err = -ENODEV;
+		goto exit_free;
+	}
+
+	/* test if we can access the TEMPERATURE MSR */
+	err = rdmsr_safe_on_cpu(data->id, data->msr, &eax, &edx);
+	if (err) {
+		dev_err(&pdev->dev,
+			"Unable to access TEMPERATURE MSR, giving up\n");
+		goto exit_free;
+	}
+
+	platform_set_drvdata(pdev, data);
+
+	err = sysfs_create_group(&pdev->dev.kobj, &via_cputemp_group);
+	if (err)
+		goto exit_free;
+
+	data->hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		dev_err(&pdev->dev, "Class registration failed (%d)\n",
+			err);
+		goto exit_remove;
+	}
+
+	return 0;
+
+exit_remove:
+	sysfs_remove_group(&pdev->dev.kobj, &via_cputemp_group);
+exit_free:
+	platform_set_drvdata(pdev, NULL);
+	kfree(data);
+exit:
+	return err;
+}
+
+static int __devexit via_cputemp_remove(struct platform_device *pdev)
+{
+	struct via_cputemp_data *data = platform_get_drvdata(pdev);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&pdev->dev.kobj, &via_cputemp_group);
+	platform_set_drvdata(pdev, NULL);
+	kfree(data);
+	return 0;
+}
+
+static struct platform_driver via_cputemp_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = DRVNAME,
+	},
+	.probe = via_cputemp_probe,
+	.remove = __devexit_p(via_cputemp_remove),
+};
+
+struct pdev_entry {
+	struct list_head list;
+	struct platform_device *pdev;
+	unsigned int cpu;
+};
+
+static LIST_HEAD(pdev_list);
+static DEFINE_MUTEX(pdev_list_mutex);
+
+static int __cpuinit via_cputemp_device_add(unsigned int cpu)
+{
+	int err;
+	struct platform_device *pdev;
+	struct pdev_entry *pdev_entry;
+
+	pdev = platform_device_alloc(DRVNAME, cpu);
+	if (!pdev) {
+		err = -ENOMEM;
+		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		goto exit;
+	}
+
+	pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL);
+	if (!pdev_entry) {
+		err = -ENOMEM;
+		goto exit_device_put;
+	}
+
+	err = platform_device_add(pdev);
+	if (err) {
+		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+		       err);
+		goto exit_device_free;
+	}
+
+	pdev_entry->pdev = pdev;
+	pdev_entry->cpu = cpu;
+	mutex_lock(&pdev_list_mutex);
+	list_add_tail(&pdev_entry->list, &pdev_list);
+	mutex_unlock(&pdev_list_mutex);
+
+	return 0;
+
+exit_device_free:
+	kfree(pdev_entry);
+exit_device_put:
+	platform_device_put(pdev);
+exit:
+	return err;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void via_cputemp_device_remove(unsigned int cpu)
+{
+	struct pdev_entry *p, *n;
+	mutex_lock(&pdev_list_mutex);
+	list_for_each_entry_safe(p, n, &pdev_list, list) {
+		if (p->cpu == cpu) {
+			platform_device_unregister(p->pdev);
+			list_del(&p->list);
+			kfree(p);
+		}
+	}
+	mutex_unlock(&pdev_list_mutex);
+}
+
+static int __cpuinit via_cputemp_cpu_callback(struct notifier_block *nfb,
+				 unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long) hcpu;
+
+	switch (action) {
+	case CPU_ONLINE:
+	case CPU_DOWN_FAILED:
+		via_cputemp_device_add(cpu);
+		break;
+	case CPU_DOWN_PREPARE:
+		via_cputemp_device_remove(cpu);
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block via_cputemp_cpu_notifier __refdata = {
+	.notifier_call = via_cputemp_cpu_callback,
+};
+#endif				/* !CONFIG_HOTPLUG_CPU */
+
+static int __init via_cputemp_init(void)
+{
+	int i, err;
+	struct pdev_entry *p, *n;
+
+	if (cpu_data(0).x86_vendor != X86_VENDOR_CENTAUR) {
+		printk(KERN_DEBUG DRVNAME ": Not a VIA CPU\n");
+		err = -ENODEV;
+		goto exit;
+	}
+
+	err = platform_driver_register(&via_cputemp_driver);
+	if (err)
+		goto exit;
+
+	for_each_online_cpu(i) {
+		struct cpuinfo_x86 *c = &cpu_data(i);
+
+		if (c->x86 != 6)
+			continue;
+
+		if (c->x86_model < 0x0a)
+			continue;
+
+		if (c->x86_model > 0x0f) {
+			printk(KERN_WARNING DRVNAME ": Unknown CPU "
+				"model 0x%x\n", c->x86_model);
+			continue;
+		}
+
+		err = via_cputemp_device_add(i);
+		if (err)
+			goto exit_devices_unreg;
+	}
+	if (list_empty(&pdev_list)) {
+		err = -ENODEV;
+		goto exit_driver_unreg;
+	}
+
+#ifdef CONFIG_HOTPLUG_CPU
+	register_hotcpu_notifier(&via_cputemp_cpu_notifier);
+#endif
+	return 0;
+
+exit_devices_unreg:
+	mutex_lock(&pdev_list_mutex);
+	list_for_each_entry_safe(p, n, &pdev_list, list) {
+		platform_device_unregister(p->pdev);
+		list_del(&p->list);
+		kfree(p);
+	}
+	mutex_unlock(&pdev_list_mutex);
+exit_driver_unreg:
+	platform_driver_unregister(&via_cputemp_driver);
+exit:
+	return err;
+}
+
+static void __exit via_cputemp_exit(void)
+{
+	struct pdev_entry *p, *n;
+#ifdef CONFIG_HOTPLUG_CPU
+	unregister_hotcpu_notifier(&via_cputemp_cpu_notifier);
+#endif
+	mutex_lock(&pdev_list_mutex);
+	list_for_each_entry_safe(p, n, &pdev_list, list) {
+		platform_device_unregister(p->pdev);
+		list_del(&p->list);
+		kfree(p);
+	}
+	mutex_unlock(&pdev_list_mutex);
+	platform_driver_unregister(&via_cputemp_driver);
+}
+
+MODULE_AUTHOR("Harald Welte <HaraldWelte@viatech.com>");
+MODULE_DESCRIPTION("VIA CPU temperature monitor");
+MODULE_LICENSE("GPL");
+
+module_init(via_cputemp_init)
+module_exit(via_cputemp_exit)

drivers/hwmon/w83627hf.c

@@ -1135,6 +1135,7 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr,
 		"W83687THF",
 	};
 
+	sio_data->sioaddr = sioaddr;
 	superio_enter(sio_data);
 	val = force_id ? force_id : superio_inb(sio_data, DEVID);
 	switch (val) {
@@ -1177,7 +1178,6 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr,
 	}
 
 	err = 0;
-	sio_data->sioaddr = sioaddr;
 	pr_info(DRVNAME ": Found %s chip at %#x\n",
 		names[sio_data->type], *addr);