Merge branch 'master' of /home/src/linux-2.6/

Documentation/device-mapper/snapshot.txt

@@ -0,0 +1,73 @@
+Device-mapper snapshot support
+==============================
+
+Device-mapper allows you, without massive data copying:
+
+*) To create snapshots of any block device i.e. mountable, saved states of
+the block device which are also writable without interfering with the
+original content;
+*) To create device "forks", i.e. multiple different versions of the
+same data stream.
+
+
+In both cases, dm copies only the chunks of data that get changed and
+uses a separate copy-on-write (COW) block device for storage.
+
+
+There are two dm targets available: snapshot and snapshot-origin.
+
+*) snapshot-origin <origin>
+
+which will normally have one or more snapshots based on it.
+You must create the snapshot-origin device before you can create snapshots.
+Reads will be mapped directly to the backing device. For each write, the
+original data will be saved in the <COW device> of each snapshot to keep
+its visible content unchanged, at least until the <COW device> fills up.
+
+
+*) snapshot <origin> <COW device> <persistent?> <chunksize>
+
+A snapshot is created of the <origin> block device. Changed chunks of
+<chunksize> sectors will be stored on the <COW device>.  Writes will
+only go to the <COW device>.  Reads will come from the <COW device> or
+from <origin> for unchanged data.  <COW device> will often be
+smaller than the origin and if it fills up the snapshot will become
+useless and be disabled, returning errors.  So it is important to monitor
+the amount of free space and expand the <COW device> before it fills up.
+
+<persistent?> is P (Persistent) or N (Not persistent - will not survive
+after reboot).
+
+
+How this is used by LVM2
+========================
+When you create the first LVM2 snapshot of a volume, four dm devices are used:
+
+1) a device containing the original mapping table of the source volume;
+2) a device used as the <COW device>;
+3) a "snapshot" device, combining #1 and #2, which is the visible snapshot
+   volume;
+4) the "original" volume (which uses the device number used by the original
+   source volume), whose table is replaced by a "snapshot-origin" mapping
+   from device #1.
+
+A fixed naming scheme is used, so with the following commands:
+
+lvcreate -L 1G -n base volumeGroup
+lvcreate -L 100M --snapshot -n snap volumeGroup/base
+
+we'll have this situation (with volumes in above order):
+
+# dmsetup table|grep volumeGroup
+
+volumeGroup-base-real: 0 2097152 linear 8:19 384
+volumeGroup-snap-cow: 0 204800 linear 8:19 2097536
+volumeGroup-snap: 0 2097152 snapshot 254:11 254:12 P 16
+volumeGroup-base: 0 2097152 snapshot-origin 254:11
+
+# ls -lL /dev/mapper/volumeGroup-*
+brw-------  1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real
+brw-------  1 root root 254, 12 29 ago 18:15 /dev/mapper/volumeGroup-snap-cow
+brw-------  1 root root 254, 13 29 ago 18:15 /dev/mapper/volumeGroup-snap
+brw-------  1 root root 254, 10 29 ago 18:14 /dev/mapper/volumeGroup-base
+

Documentation/sparse.txt

@@ -51,9 +51,9 @@ or you don't get any checking at all.
 Where to get sparse
 ~~~~~~~~~~~~~~~~~~~
 
-With BK, you can just get it from
+With git, you can just get it from
 
-        bk://sparse.bkbits.net/sparse
+        rsync://rsync.kernel.org/pub/scm/devel/sparse/sparse.git
 
 and DaveJ has tar-balls at
 

Documentation/usb/URB.txt

@@ -1,5 +1,6 @@
 Revised: 2000-Dec-05.
 Again:   2002-Jul-06
+Again:   2005-Sep-19
 
     NOTE:
 
@@ -18,8 +19,8 @@ called USB Request Block, or URB for short.
   and deliver the data and status back. 
 
 - Execution of an URB is inherently an asynchronous operation, i.e. the 
-  usb_submit_urb(urb) call returns immediately after it has successfully queued 
+  usb_submit_urb(urb) call returns immediately after it has successfully
-  the requested action. 
+  queued the requested action.
 
 - Transfers for one URB can be canceled with usb_unlink_urb(urb) at any time. 
 
@@ -94,8 +95,9 @@ To free an URB, use
 
 	void usb_free_urb(struct urb *urb)
 
-You may not free an urb that you've submitted, but which hasn't yet been
+You may free an urb that you've submitted, but which hasn't yet been
-returned to you in a completion callback.
+returned to you in a completion callback.  It will automatically be
+deallocated when it is no longer in use.
 
 
 1.4. What has to be filled in?
@@ -145,30 +147,36 @@ to get seamless ISO streaming.
 
 1.6. How to cancel an already running URB?
 
-For an URB which you've submitted, but which hasn't been returned to
+There are two ways to cancel an URB you've submitted but which hasn't
-your driver by the host controller, call
+been returned to your driver yet.  For an asynchronous cancel, call
 
 	int usb_unlink_urb(struct urb *urb)
 
 It removes the urb from the internal list and frees all allocated
-HW descriptors. The status is changed to reflect unlinking. After 
+HW descriptors. The status is changed to reflect unlinking.  Note
-usb_unlink_urb() returns with that status code, you can free the URB
+that the URB will not normally have finished when usb_unlink_urb()
-with usb_free_urb().
+returns; you must still wait for the completion handler to be called.
 
-There is also an asynchronous unlink mode.  To use this, set the
+To cancel an URB synchronously, call
-the URB_ASYNC_UNLINK flag in urb->transfer flags before calling
+
-usb_unlink_urb().  When using async unlinking, the URB will not
+	void usb_kill_urb(struct urb *urb)
-normally be unlinked when usb_unlink_urb() returns.  Instead, wait
+
-for the completion handler to be called.
+It does everything usb_unlink_urb does, and in addition it waits
+until after the URB has been returned and the completion handler
+has finished.  It also marks the URB as temporarily unusable, so
+that if the completion handler or anyone else tries to resubmit it
+they will get a -EPERM error.  Thus you can be sure that when
+usb_kill_urb() returns, the URB is totally idle.
 
 
 1.7. What about the completion handler?
 
 The handler is of the following type:
 
-	typedef void (*usb_complete_t)(struct urb *);
+	typedef void (*usb_complete_t)(struct urb *, struct pt_regs *)
 
-i.e. it gets just the URB that caused the completion call.
+I.e., it gets the URB that caused the completion call, plus the
+register values at the time of the corresponding interrupt (if any).
 In the completion handler, you should have a look at urb->status to
 detect any USB errors. Since the context parameter is included in the URB,
 you can pass information to the completion handler. 
@@ -176,17 +184,11 @@ you can pass information to the completion handler.
 Note that even when an error (or unlink) is reported, data may have been
 transferred.  That's because USB transfers are packetized; it might take
 sixteen packets to transfer your 1KByte buffer, and ten of them might
-have transferred succesfully before the completion is called.
+have transferred succesfully before the completion was called.
 
 
 NOTE:  ***** WARNING *****
-Don't use urb->dev field in your completion handler; it's cleared
+NEVER SLEEP IN A COMPLETION HANDLER.  These are normally called
-as part of giving urbs back to drivers.  (Addressing an issue with
-ownership of periodic URBs, which was otherwise ambiguous.) Instead,
-use urb->context to hold all the data your driver needs.
-
-NOTE:  ***** WARNING *****
-Also, NEVER SLEEP IN A COMPLETION HANDLER.  These are normally called
 during hardware interrupt processing.  If you can, defer substantial
 work to a tasklet (bottom half) to keep system latencies low.  You'll
 probably need to use spinlocks to protect data structures you manipulate
@@ -229,24 +231,10 @@ ISO data with some other event stream.
 Interrupt transfers, like isochronous transfers, are periodic, and happen
 in intervals that are powers of two (1, 2, 4 etc) units.  Units are frames
 for full and low speed devices, and microframes for high speed ones.
-
-Currently, after you submit one interrupt URB, that urb is owned by the
-host controller driver until you cancel it with usb_unlink_urb().  You
-may unlink interrupt urbs in their completion handlers, if you need to.
-
-After a transfer completion is called, the URB is automagically resubmitted.
-THIS BEHAVIOR IS EXPECTED TO BE REMOVED!!
-
-Interrupt transfers may only send (or receive) the "maxpacket" value for
-the given interrupt endpoint; if you need more data, you will need to
-copy that data out of (or into) another buffer.  Similarly, you can't
-queue interrupt transfers.
-THESE RESTRICTIONS ARE EXPECTED TO BE REMOVED!!
-
-Note that this automagic resubmission model does make it awkward to use
-interrupt OUT transfers.  The portable solution involves unlinking those
-OUT urbs after the data is transferred, and perhaps submitting a final
-URB for a short packet.
-
 The usb_submit_urb() call modifies urb->interval to the implemented interval
 value that is less than or equal to the requested interval value.
+
+In Linux 2.6, unlike earlier versions, interrupt URBs are not automagically
+restarted when they complete.  They end when the completion handler is
+called, just like other URBs.  If you want an interrupt URB to be restarted,
+your completion handler must resubmit it.

MAINTAINERS

@@ -1063,8 +1063,6 @@ M:	wli@holomorphy.com
 S:	Maintained
 
 I2C SUBSYSTEM
-P:	Greg Kroah-Hartman
-M:	greg@kroah.com
 P:	Jean Delvare
 M:	khali@linux-fr.org
 L:	lm-sensors@lm-sensors.org
@@ -1404,6 +1402,18 @@ L:	linux-kernel@vger.kernel.org
 L:	fastboot@osdl.org
 S:	Maintained
 
+KPROBES
+P:	Prasanna S Panchamukhi
+M:	prasanna@in.ibm.com
+P:	Ananth N Mavinakayanahalli
+M:	ananth@in.ibm.com
+P:	Anil S Keshavamurthy
+M:	anil.s.keshavamurthy@intel.com
+P:	David S. Miller
+M:	davem@davemloft.net
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+
 LANMEDIA WAN CARD DRIVER
 P:	Andrew Stanley-Jones
 M:	asj@lanmedia.com

README

@@ -151,7 +151,7 @@ CONFIGURING the kernel:
 			   your existing ./.config file.
 	"make silentoldconfig"
 			   Like above, but avoids cluttering the screen
-			   with question already answered.
+			   with questions already answered.
    
 	NOTES on "make config":
 	- having unnecessary drivers will make the kernel bigger, and can
@@ -199,9 +199,9 @@ COMPILING the kernel:
    are installing a new kernel with the same version number as your
    working kernel, make a backup of your modules directory before you
    do a "make modules_install".
-   In alternative, before compiling, edit your Makefile and change the
+   Alternatively, before compiling, use the kernel config option
-   "EXTRAVERSION" line - its content is appended to the regular kernel
+   "LOCALVERSION" to append a unique suffix to the regular kernel version.
-   version.
+   LOCALVERSION can be set in the "General Setup" menu.
 
  - In order to boot your new kernel, you'll need to copy the kernel
    image (e.g. .../linux/arch/i386/boot/bzImage after compilation)

arch/alpha/kernel/process.c

@@ -127,6 +127,10 @@ common_shutdown_1(void *generic_ptr)
 	/* If booted from SRM, reset some of the original environment. */
 	if (alpha_using_srm) {
 #ifdef CONFIG_DUMMY_CONSOLE
+		/* If we've gotten here after SysRq-b, leave interrupt
+		   context before taking over the console. */
+		if (in_interrupt())
+			irq_exit();
 		/* This has the effect of resetting the VGA video origin.  */
 		take_over_console(&dummy_con, 0, MAX_NR_CONSOLES-1, 1);
 #endif

arch/arm/kernel/entry-armv.S

@@ -537,7 +537,7 @@ ENTRY(__switch_to)
 #ifdef CONFIG_CPU_MPCORE
 	clrex
 #else
-	strex	r3, r4, [ip]			@ Clear exclusive monitor
+	strex	r5, r4, [ip]			@ Clear exclusive monitor
 #endif
 #endif
 #if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)

arch/arm/kernel/io.c

@@ -7,7 +7,7 @@
  * Copy data from IO memory space to "real" memory space.
  * This needs to be optimized.
  */
-void _memcpy_fromio(void *to, void __iomem *from, size_t count)
+void _memcpy_fromio(void *to, const volatile void __iomem *from, size_t count)
 {
 	unsigned char *t = to;
 	while (count) {
@@ -22,7 +22,7 @@ void _memcpy_fromio(void *to, void __iomem *from, size_t count)
  * Copy data from "real" memory space to IO memory space.
  * This needs to be optimized.
  */
-void _memcpy_toio(void __iomem *to, const void *from, size_t count)
+void _memcpy_toio(volatile void __iomem *to, const void *from, size_t count)
 {
 	const unsigned char *f = from;
 	while (count) {
@@ -37,7 +37,7 @@ void _memcpy_toio(void __iomem *to, const void *from, size_t count)
  * "memset" on IO memory space.
  * This needs to be optimized.
  */
-void _memset_io(void __iomem *dst, int c, size_t count)
+void _memset_io(volatile void __iomem *dst, int c, size_t count)
 {
 	while (count) {
 		count--;

arch/ia64/hp/sim/simscsi.c

@@ -233,6 +233,23 @@ simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
 		simscsi_readwrite(sc, mode, offset, ((sc->cmnd[7] << 8) | sc->cmnd[8])*512);
 }
 
+static void simscsi_fillresult(struct scsi_cmnd *sc, char *buf, unsigned len)
+{
+
+	int scatterlen = sc->use_sg;
+	struct scatterlist *slp;
+
+	if (scatterlen == 0)
+		memcpy(sc->request_buffer, buf, len);
+	else for (slp = (struct scatterlist *)sc->buffer; scatterlen-- > 0 && len > 0; slp++) {
+		unsigned thislen = min(len, slp->length);
+
+		memcpy(page_address(slp->page) + slp->offset, buf, thislen);
+		slp++;
+		len -= thislen;
+	}
+}
+
 static int
 simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 {
@@ -240,6 +257,7 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 	char fname[MAX_ROOT_LEN+16];
 	size_t disk_size;
 	char *buf;
+	char localbuf[36];
 #if DEBUG_SIMSCSI
 	register long sp asm ("sp");
 
@@ -263,7 +281,7 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 				/* disk doesn't exist... */
 				break;
 			}
-			buf = sc->request_buffer;
+			buf = localbuf;
 			buf[0] = 0;	/* magnetic disk */
 			buf[1] = 0;	/* not a removable medium */
 			buf[2] = 2;	/* SCSI-2 compliant device */
@@ -273,6 +291,7 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 			buf[6] = 0;	/* reserved */
 			buf[7] = 0;	/* various flags */
 			memcpy(buf + 8, "HP      SIMULATED DISK  0.00",  28);
+			simscsi_fillresult(sc, buf, 36);
 			sc->result = GOOD;
 			break;
 
@@ -304,16 +323,13 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 			simscsi_readwrite10(sc, SSC_WRITE);
 			break;
 
-
 		      case READ_CAPACITY:
 			if (desc[target_id] < 0 || sc->request_bufflen < 8) {
 				break;
 			}
-			buf = sc->request_buffer;
+			buf = localbuf;
-
 			disk_size = simscsi_get_disk_size(desc[target_id]);
 
-			/* pretend to be a 1GB disk (partition table contains real stuff): */
 			buf[0] = (disk_size >> 24) & 0xff;
 			buf[1] = (disk_size >> 16) & 0xff;
 			buf[2] = (disk_size >>  8) & 0xff;
@@ -323,13 +339,14 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 			buf[5] = 0;
 			buf[6] = 2;
 			buf[7] = 0;
+			simscsi_fillresult(sc, buf, 8);
 			sc->result = GOOD;
 			break;
 
 		      case MODE_SENSE:
 		      case MODE_SENSE_10:
 			/* sd.c uses this to determine whether disk does write-caching. */
-			memset(sc->request_buffer, 0, 128);
+			simscsi_fillresult(sc, (char *)empty_zero_page, sc->request_bufflen);
 			sc->result = GOOD;
 			break;
 

arch/ia64/kernel/mca_asm.S

@@ -489,24 +489,27 @@ ia64_state_save:
 	;;
 	st8 [temp1]=r17,16	// pal_min_state
 	st8 [temp2]=r6,16	// prev_IA64_KR_CURRENT
+	mov r6=IA64_KR(CURRENT_STACK)
+	;;
+	st8 [temp1]=r6,16	// prev_IA64_KR_CURRENT_STACK
+	st8 [temp2]=r0,16	// prev_task, starts off as NULL
 	mov r6=cr.ifa
 	;;
-	st8 [temp1]=r0,16	// prev_task, starts off as NULL
+	st8 [temp1]=r12,16	// cr.isr
-	st8 [temp2]=r12,16	// cr.isr
+	st8 [temp2]=r6,16	// cr.ifa
 	mov r12=cr.itir
 	;;
-	st8 [temp1]=r6,16	// cr.ifa
+	st8 [temp1]=r12,16	// cr.itir
-	st8 [temp2]=r12,16	// cr.itir
+	st8 [temp2]=r11,16	// cr.iipa
 	mov r12=cr.iim
 	;;
-	st8 [temp1]=r11,16	// cr.iipa
+	st8 [temp1]=r12,16	// cr.iim
-	st8 [temp2]=r12,16	// cr.iim
-	mov r6=cr.iha
 (p1)	mov r12=IA64_MCA_COLD_BOOT
 (p2)	mov r12=IA64_INIT_WARM_BOOT
+	mov r6=cr.iha
 	;;
-	st8 [temp1]=r6,16	// cr.iha
+	st8 [temp2]=r6,16	// cr.iha
-	st8 [temp2]=r12		// os_status, default is cold boot
+	st8 [temp1]=r12		// os_status, default is cold boot
 	mov r6=IA64_MCA_SAME_CONTEXT
 	;;
 	st8 [temp1]=r6		// context, default is same context
@@ -823,9 +826,12 @@ ia64_state_restore:
 	ld8 r12=[temp1],16	// sal_ra
 	ld8 r9=[temp2],16	// sal_gp
 	;;
-	ld8 r22=[temp1],24	// pal_min_state, virtual.  skip prev_task
+	ld8 r22=[temp1],16	// pal_min_state, virtual
 	ld8 r21=[temp2],16	// prev_IA64_KR_CURRENT
 	;;
+	ld8 r16=[temp1],16	// prev_IA64_KR_CURRENT_STACK
+	ld8 r20=[temp2],16	// prev_task
+	;;
 	ld8 temp3=[temp1],16	// cr.isr
 	ld8 temp4=[temp2],16	// cr.ifa
 	;;
@@ -846,6 +852,45 @@ ia64_state_restore:
 	ld8 r8=[temp1]		// os_status
 	ld8 r10=[temp2]		// context
 
+	/* Wire IA64_TR_CURRENT_STACK to the stack that we are resuming to.  To
+	 * avoid any dependencies on the algorithm in ia64_switch_to(), just
+	 * purge any existing CURRENT_STACK mapping and insert the new one.
+	 *
+	 * r16 contains prev_IA64_KR_CURRENT_STACK, r21 contains
+	 * prev_IA64_KR_CURRENT, these values may have been changed by the C
+	 * code.  Do not use r8, r9, r10, r22, they contain values ready for
+	 * the return to SAL.
+	 */
+
+	mov r15=IA64_KR(CURRENT_STACK)		// physical granule mapped by IA64_TR_CURRENT_STACK
+	;;
+	shl r15=r15,IA64_GRANULE_SHIFT
+	;;
+	dep r15=-1,r15,61,3			// virtual granule
+	mov r18=IA64_GRANULE_SHIFT<<2		// for cr.itir.ps
+	;;
+	ptr.d r15,r18
+	;;
+	srlz.d
+
+	extr.u r19=r21,61,3			// r21 = prev_IA64_KR_CURRENT
+	shl r20=r16,IA64_GRANULE_SHIFT		// r16 = prev_IA64_KR_CURRENT_STACK
+	movl r21=PAGE_KERNEL			// page properties
+	;;
+	mov IA64_KR(CURRENT_STACK)=r16
+	cmp.ne p6,p0=RGN_KERNEL,r19		// new stack is in the kernel region?
+	or r21=r20,r21				// construct PA | page properties
+(p6)	br.spnt 1f				// the dreaded cpu 0 idle task in region 5:(
+	;;
+	mov cr.itir=r18
+	mov cr.ifa=r21
+	mov r20=IA64_TR_CURRENT_STACK
+	;;
+	itr.d dtr[r20]=r21
+	;;
+	srlz.d
+1:
+
 	br.sptk b0
 
 //EndStub//////////////////////////////////////////////////////////////////////
@@ -982,6 +1027,7 @@ ia64_set_kernel_registers:
 	add temp4=temp4, temp1	// &struct ia64_sal_os_state.os_gp
 	add r12=temp1, temp3	// kernel stack pointer on MCA/INIT stack
 	add r13=temp1, r3	// set current to start of MCA/INIT stack
+	add r20=temp1, r3	// physical start of MCA/INIT stack
 	;;
 	ld8 r1=[temp4]		// OS GP from SAL OS state
 	;;
@@ -991,7 +1037,35 @@ ia64_set_kernel_registers:
 	;;
 	mov IA64_KR(CURRENT)=r13
 
-	// FIXME: do I need to wire IA64_KR_CURRENT_STACK and IA64_TR_CURRENT_STACK?
+	/* Wire IA64_TR_CURRENT_STACK to the MCA/INIT handler stack.  To avoid
+	 * any dependencies on the algorithm in ia64_switch_to(), just purge
+	 * any existing CURRENT_STACK mapping and insert the new one.
+	 */
+
+	mov r16=IA64_KR(CURRENT_STACK)		// physical granule mapped by IA64_TR_CURRENT_STACK
+	;;
+	shl r16=r16,IA64_GRANULE_SHIFT
+	;;
+	dep r16=-1,r16,61,3			// virtual granule
+	mov r18=IA64_GRANULE_SHIFT<<2		// for cr.itir.ps
+	;;
+	ptr.d r16,r18
+	;;
+	srlz.d
+
+	shr.u r16=r20,IA64_GRANULE_SHIFT	// r20 = physical start of MCA/INIT stack
+	movl r21=PAGE_KERNEL			// page properties
+	;;
+	mov IA64_KR(CURRENT_STACK)=r16
+	or r21=r20,r21				// construct PA | page properties
+	;;
+	mov cr.itir=r18
+	mov cr.ifa=r13
+	mov r20=IA64_TR_CURRENT_STACK
+	;;
+	itr.d dtr[r20]=r21
+	;;
+	srlz.d
 
 	br.sptk b0
 

arch/ia64/kernel/mca_drv.c

@@ -56,8 +56,9 @@ static struct page *page_isolate[MAX_PAGE_ISOLATE];
 static int num_page_isolate = 0;
 
 typedef enum {
-	ISOLATE_NG = 0,
+	ISOLATE_NG,
-	ISOLATE_OK = 1
+	ISOLATE_OK,
+	ISOLATE_NONE
 } isolate_status_t;
 
 /*
@@ -74,7 +75,7 @@ static struct {
  * @paddr:	poisoned memory location
  *
  * Return value:
- *	ISOLATE_OK / ISOLATE_NG
+ *	one of isolate_status_t, ISOLATE_OK/NG/NONE.
  */
 
 static isolate_status_t
@@ -85,7 +86,10 @@ mca_page_isolate(unsigned long paddr)
 
 	/* whether physical address is valid or not */
 	if (!ia64_phys_addr_valid(paddr))
-		return ISOLATE_NG;
+		return ISOLATE_NONE;
+
+	if (!pfn_valid(paddr))
+		return ISOLATE_NONE;
 
 	/* convert physical address to physical page number */
 	p = pfn_to_page(paddr>>PAGE_SHIFT);
@@ -122,10 +126,15 @@ mca_handler_bh(unsigned long paddr)
 		current->pid, current->comm);
 
 	spin_lock(&mca_bh_lock);
-	if (mca_page_isolate(paddr) == ISOLATE_OK) {
+	switch (mca_page_isolate(paddr)) {
+	case ISOLATE_OK:
 		printk(KERN_DEBUG "Page isolation: ( %lx ) success.\n", paddr);
-	} else {
+		break;
+	case ISOLATE_NG:
 		printk(KERN_DEBUG "Page isolation: ( %lx ) failure.\n", paddr);
+		break;
+	default:
+		break;
 	}
 	spin_unlock(&mca_bh_lock);
 

arch/ppc/kernel/Makefile

@@ -15,9 +15,8 @@ extra-y				+= vmlinux.lds
 obj-y				:= entry.o traps.o irq.o idle.o time.o misc.o \
 					process.o signal.o ptrace.o align.o \
 					semaphore.o syscalls.o setup.o \
-					cputable.o ppc_htab.o
+					cputable.o ppc_htab.o perfmon.o
 obj-$(CONFIG_6xx)		+= l2cr.o cpu_setup_6xx.o
-obj-$(CONFIG_E500)		+= perfmon.o
 obj-$(CONFIG_SOFTWARE_SUSPEND)	+= swsusp.o
 obj-$(CONFIG_POWER4)		+= cpu_setup_power4.o
 obj-$(CONFIG_MODULES)		+= module.o ppc_ksyms.o

arch/ppc/kernel/perfmon.c

@@ -45,7 +45,7 @@ static void dummy_perf(struct pt_regs *regs)
 	mtpmr(PMRN_PMGC0, pmgc0);
 }
 
-#else
+#elif CONFIG_6xx
 /* Ensure exceptions are disabled */
 
 static void dummy_perf(struct pt_regs *regs)
@@ -55,6 +55,10 @@ static void dummy_perf(struct pt_regs *regs)
 	mmcr0 &= ~MMCR0_PMXE;
 	mtspr(SPRN_MMCR0, mmcr0);
 }
+#else
+static void dummy_perf(struct pt_regs *regs)
+{
+}
 #endif
 
 void (*perf_irq)(struct pt_regs *) = dummy_perf;

arch/ppc/platforms/pmac_setup.c

@@ -719,7 +719,8 @@ pmac_declare_of_platform_devices(void)
 	if (np) {
 		for (np = np->child; np != NULL; np = np->sibling)
 			if (strncmp(np->name, "i2c", 3) == 0) {
-				of_platform_device_create(np, "uni-n-i2c");
+				of_platform_device_create(np, "uni-n-i2c",
+							  NULL);
 				break;
 			}
 	}
@@ -727,17 +728,18 @@ pmac_declare_of_platform_devices(void)
 	if (np) {
 		for (np = np->child; np != NULL; np = np->sibling)
 			if (strncmp(np->name, "i2c", 3) == 0) {
-				of_platform_device_create(np, "u3-i2c");
+				of_platform_device_create(np, "u3-i2c",
+							  NULL);
 				break;
 			}
 	}
 
 	np = find_devices("valkyrie");
 	if (np)
-		of_platform_device_create(np, "valkyrie");
+		of_platform_device_create(np, "valkyrie", NULL);
 	np = find_devices("platinum");
 	if (np)
-		of_platform_device_create(np, "platinum");
+		of_platform_device_create(np, "platinum", NULL);
 
 	return 0;
 }

arch/ppc/syslib/of_device.c

@@ -234,7 +234,9 @@ void of_device_unregister(struct of_device *ofdev)
 	device_unregister(&ofdev->dev);
 }
 
-struct of_device* of_platform_device_create(struct device_node *np, const char *bus_id)
+struct of_device* of_platform_device_create(struct device_node *np,
+					    const char *bus_id,
+					    struct device *parent)
 {
 	struct of_device *dev;
 	u32 *reg;
@@ -247,7 +249,7 @@ struct of_device* of_platform_device_create(struct device_node *np, const char *
 	dev->node = of_node_get(np);
 	dev->dma_mask = 0xffffffffUL;
 	dev->dev.dma_mask = &dev->dma_mask;
-	dev->dev.parent = NULL;
+	dev->dev.parent = parent;
 	dev->dev.bus = &of_platform_bus_type;
 	dev->dev.release = of_release_dev;
 

arch/ppc/syslib/ppc85xx_setup.c

@@ -184,8 +184,8 @@ mpc85xx_setup_pci1(struct pci_controller *hose)
 	pci->powar1 = 0x80044000 |
 	   (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1);
 
-	/* Setup outboud IO windows @ MPC85XX_PCI1_IO_BASE */
+	/* Setup outbound IO windows @ MPC85XX_PCI1_IO_BASE */
-	pci->potar2 = 0x00000000;
+	pci->potar2 = (MPC85XX_PCI1_LOWER_IO >> 12) & 0x000fffff;
 	pci->potear2 = 0x00000000;
 	pci->powbar2 = (MPC85XX_PCI1_IO_BASE >> 12) & 0x000fffff;
 	/* Enable, IO R/W */
@@ -235,8 +235,8 @@ mpc85xx_setup_pci2(struct pci_controller *hose)
 	pci->powar1 = 0x80044000 |
 	   (__ilog2(MPC85XX_PCI2_UPPER_MEM - MPC85XX_PCI2_LOWER_MEM + 1) - 1);
 
-	/* Setup outboud IO windows @ MPC85XX_PCI2_IO_BASE */
+	/* Setup outbound IO windows @ MPC85XX_PCI2_IO_BASE */
-	pci->potar2 = 0x00000000;
+	pci->potar2 = (MPC85XX_PCI2_LOWER_IO >> 12) & 0x000fffff;;
 	pci->potear2 = 0x00000000;
 	pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff;
 	/* Enable, IO R/W */

arch/ppc64/kernel/of_device.c

@@ -233,7 +233,9 @@ void of_device_unregister(struct of_device *ofdev)
 	device_unregister(&ofdev->dev);
 }
 
-struct of_device* of_platform_device_create(struct device_node *np, const char *bus_id)
+struct of_device* of_platform_device_create(struct device_node *np,
+					    const char *bus_id,
+					    struct device *parent)
 {
 	struct of_device *dev;
 
@@ -245,7 +247,7 @@ struct of_device* of_platform_device_create(struct device_node *np, const char *
 	dev->node = np;
 	dev->dma_mask = 0xffffffffUL;
 	dev->dev.dma_mask = &dev->dma_mask;
-	dev->dev.parent = NULL;
+	dev->dev.parent = parent;
 	dev->dev.bus = &of_platform_bus_type;
 	dev->dev.release = of_release_dev;
 
@@ -259,6 +261,7 @@ struct of_device* of_platform_device_create(struct device_node *np, const char *
 	return dev;
 }
 
+
 EXPORT_SYMBOL(of_match_device);
 EXPORT_SYMBOL(of_platform_bus_type);
 EXPORT_SYMBOL(of_register_driver);

arch/ppc64/kernel/pSeries_iommu.c

@@ -364,7 +364,8 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus)
 
 		while (pci->phb->dma_window_size * children > 0x80000000ul)
 			pci->phb->dma_window_size >>= 1;
-		DBG("No ISA/IDE, window size is %x\n", pci->phb->dma_window_size);
+		DBG("No ISA/IDE, window size is 0x%lx\n",
+			pci->phb->dma_window_size);
 		pci->phb->dma_window_base_cur = 0;
 
 		return;
@@ -388,7 +389,7 @@ static void iommu_bus_setup_pSeries(struct pci_bus *bus)
 	while (pci->phb->dma_window_size * children > 0x70000000ul)
 		pci->phb->dma_window_size >>= 1;
 
-	DBG("ISA/IDE, window size is %x\n", pci->phb->dma_window_size);
+	DBG("ISA/IDE, window size is 0x%lx\n", pci->phb->dma_window_size);
 
 }
 
@@ -442,7 +443,7 @@ static void iommu_dev_setup_pSeries(struct pci_dev *dev)
 	struct device_node *dn, *mydn;
 	struct iommu_table *tbl;
 
-	DBG("iommu_dev_setup_pSeries, dev %p (%s)\n", dev, dev->pretty_name);
+	DBG("iommu_dev_setup_pSeries, dev %p (%s)\n", dev, pci_name(dev));
 
 	mydn = dn = pci_device_to_OF_node(dev);
 
@@ -469,7 +470,7 @@ static void iommu_dev_setup_pSeries(struct pci_dev *dev)
 	if (dn && dn->data) {
 		PCI_DN(mydn)->iommu_table = PCI_DN(dn)->iommu_table;
 	} else {
-		DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, dev->pretty_name);
+		DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, pci_name(dev));
 	}
 }
 
@@ -503,7 +504,7 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev)
 	int *dma_window = NULL;
 	struct pci_dn *pci;
 
-	DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, dev->pretty_name);
+	DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, pci_name(dev));
 
 	/* dev setup for LPAR is a little tricky, since the device tree might
 	 * contain the dma-window properties per-device and not neccesarily
@@ -525,9 +526,8 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev)
 	 * slots on POWER4 machines.
 	 */
 	if (dma_window == NULL || pdn->parent == NULL) {
-		/* Fall back to regular (non-LPAR) dev setup */
+		DBG("No dma window for device, linking to parent\n");
-		DBG("No dma window for device, falling back to regular setup\n");
+		PCI_DN(dn)->iommu_table = PCI_DN(pdn)->iommu_table;
-		iommu_dev_setup_pSeries(dev);
 		return;
 	} else {
 		DBG("Found DMA window, allocating table\n");

arch/ppc64/kernel/pmac_setup.c

@@ -434,16 +434,24 @@ static int pmac_check_legacy_ioport(unsigned int baseport)
 
 static int __init pmac_declare_of_platform_devices(void)
 {
-	struct device_node *np;
+	struct device_node *np, *npp;
 
-	np = find_devices("u3");
+	npp = of_find_node_by_name(NULL, "u3");
-	if (np) {
+	if (npp) {
-		for (np = np->child; np != NULL; np = np->sibling)
+		for (np = NULL; (np = of_get_next_child(npp, np)) != NULL;) {
 			if (strncmp(np->name, "i2c", 3) == 0) {
-				of_platform_device_create(np, "u3-i2c");
+				of_platform_device_create(np, "u3-i2c", NULL);
+				of_node_put(np);
 				break;
 			}
 		}
+		of_node_put(npp);
+	}
+        npp = of_find_node_by_type(NULL, "smu");
+        if (npp) {
+		of_platform_device_create(npp, "smu", NULL);
+		of_node_put(npp);
+	}
 
 	return 0;
 }

arch/ppc64/kernel/pmac_time.c

@@ -84,7 +84,7 @@ void __pmac pmac_get_rtc_time(struct rtc_time *tm)
 
 #ifdef CONFIG_PMAC_SMU
 	case SYS_CTRLER_SMU:
-		smu_get_rtc_time(tm);
+		smu_get_rtc_time(tm, 1);
 		break;
 #endif /* CONFIG_PMAC_SMU */
 	default:
@@ -128,7 +128,7 @@ int __pmac pmac_set_rtc_time(struct rtc_time *tm)
 
 #ifdef CONFIG_PMAC_SMU
 	case SYS_CTRLER_SMU:
-		return smu_set_rtc_time(tm);
+		return smu_set_rtc_time(tm, 1);
 #endif /* CONFIG_PMAC_SMU */
 	default:
 		return -ENODEV;

arch/ppc64/kernel/ptrace.c

@@ -219,6 +219,7 @@ int sys_ptrace(long request, long pid, long addr, long data)
 
 	case PTRACE_SET_DEBUGREG:
 		ret = ptrace_set_debugreg(child, addr, data);
+		break;
 
 	case PTRACE_DETACH:
 		ret = ptrace_detach(child, data);

arch/ppc64/mm/hash_native.c

@@ -343,9 +343,7 @@ static void native_flush_hash_range(unsigned long context,
 	hpte_t *hptep;
 	unsigned long hpte_v;
 	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
-
+	unsigned long large;
-	/* XXX fix for large ptes */
-	unsigned long large = 0;
 
 	local_irq_save(flags);
 
@@ -358,6 +356,7 @@ static void native_flush_hash_range(unsigned long context,
 
 		va = (vsid << 28) | (batch->addr[i] & 0x0fffffff);
 		batch->vaddr[j] = va;
+		large = pte_huge(batch->pte[i]);
 		if (large)
 			vpn = va >> HPAGE_SHIFT;
 		else

arch/ppc64/mm/hugetlbpage.c

@@ -710,10 +710,13 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
 			hpte_group = ((~hash & htab_hash_mask) *
 				      HPTES_PER_GROUP) & ~0x7UL; 
 			slot = ppc_md.hpte_insert(hpte_group, va, prpn,
-						  HPTE_V_LARGE, rflags);
+						  HPTE_V_LARGE |
+						  HPTE_V_SECONDARY,
+						  rflags);
 			if (slot == -1) {
 				if (mftb() & 0x1)
-					hpte_group = ((hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL;
+					hpte_group = ((hash & htab_hash_mask) *
+						      HPTES_PER_GROUP)&~0x7UL;
 
 				ppc_md.hpte_remove(hpte_group);
 				goto repeat;

arch/um/drivers/chan_kern.c

@@ -19,18 +19,44 @@
 #include "line.h"
 #include "os.h"
 
-#ifdef CONFIG_NOCONFIG_CHAN
+/* XXX: could well be moved to somewhere else, if needed. */
+static int my_printf(const char * fmt, ...)
+	__attribute__ ((format (printf, 1, 2)));
 
-/* The printk's here are wrong because we are complaining that there is no
+static int my_printf(const char * fmt, ...)
- * output device, but printk is printing to that output device.  The user will
+{
- * never see the error.  printf would be better, except it can't run on a
+	/* Yes, can be called on atomic context.*/
- * kernel stack because it will overflow it.
+	char *buf = kmalloc(4096, GFP_ATOMIC);
- * Use printk for now since that will avoid crashing.
+	va_list args;
- */
+	int r;
+
+	if (!buf) {
+		/* We print directly fmt.
+		 * Yes, yes, yes, feel free to complain. */
+		r = strlen(fmt);
+	} else {
+		va_start(args, fmt);
+		r = vsprintf(buf, fmt, args);
+		va_end(args);
+		fmt = buf;
+	}
+
+	if (r)
+		r = os_write_file(1, fmt, r);
+	return r;
+
+}
+
+#ifdef CONFIG_NOCONFIG_CHAN
+/* Despite its name, there's no added trailing newline. */
+static int my_puts(const char * buf)
+{
+	return os_write_file(1, buf, strlen(buf));
+}
 
 static void *not_configged_init(char *str, int device, struct chan_opts *opts)
 {
-	printk(KERN_ERR "Using a channel type which is configured out of "
+	my_puts("Using a channel type which is configured out of "
 	       "UML\n");
 	return(NULL);
 }
@@ -38,27 +64,27 @@ static void *not_configged_init(char *str, int device, struct chan_opts *opts)
 static int not_configged_open(int input, int output, int primary, void *data,
 			      char **dev_out)
 {
-	printk(KERN_ERR "Using a channel type which is configured out of "
+	my_puts("Using a channel type which is configured out of "
 	       "UML\n");
 	return(-ENODEV);
 }
 
 static void not_configged_close(int fd, void *data)
 {
-	printk(KERN_ERR "Using a channel type which is configured out of "
+	my_puts("Using a channel type which is configured out of "
 	       "UML\n");
 }
 
 static int not_configged_read(int fd, char *c_out, void *data)
 {
-	printk(KERN_ERR "Using a channel type which is configured out of "
+	my_puts("Using a channel type which is configured out of "
 	       "UML\n");
 	return(-EIO);
 }
 
 static int not_configged_write(int fd, const char *buf, int len, void *data)
 {
-	printk(KERN_ERR "Using a channel type which is configured out of "
+	my_puts("Using a channel type which is configured out of "
 	       "UML\n");
 	return(-EIO);
 }
@@ -66,7 +92,7 @@ static int not_configged_write(int fd, const char *buf, int len, void *data)
 static int not_configged_console_write(int fd, const char *buf, int len,
 				       void *data)
 {
-	printk(KERN_ERR "Using a channel type which is configured out of "
+	my_puts("Using a channel type which is configured out of "
 	       "UML\n");
 	return(-EIO);
 }
@@ -74,14 +100,14 @@ static int not_configged_console_write(int fd, const char *buf, int len,
 static int not_configged_window_size(int fd, void *data, unsigned short *rows,
 				     unsigned short *cols)
 {
-	printk(KERN_ERR "Using a channel type which is configured out of "
+	my_puts("Using a channel type which is configured out of "
 	       "UML\n");
 	return(-ENODEV);
 }
 
 static void not_configged_free(void *data)
 {
-	printf(KERN_ERR "Using a channel type which is configured out of "
+	my_puts("Using a channel type which is configured out of "
 	       "UML\n");
 }
 
@@ -457,7 +483,7 @@ static struct chan *parse_chan(char *str, int pri, int device,
 		}
 	}
 	if(ops == NULL){
-		printk(KERN_ERR "parse_chan couldn't parse \"%s\"\n", 
+		my_printf("parse_chan couldn't parse \"%s\"\n",
 		       str);
 		return(NULL);
 	}
@@ -465,7 +491,7 @@ static struct chan *parse_chan(char *str, int pri, int device,
 	data = (*ops->init)(str, device, opts);
 	if(data == NULL) return(NULL);
 
-	chan = kmalloc(sizeof(*chan), GFP_KERNEL);
+	chan = kmalloc(sizeof(*chan), GFP_ATOMIC);
 	if(chan == NULL) return(NULL);
 	*chan = ((struct chan) { .list	 	= LIST_HEAD_INIT(chan->list),
 				 .primary	= 1,

arch/um/drivers/mconsole_user.c

@@ -23,7 +23,7 @@ static struct mconsole_command commands[] = {
 	{ "reboot", mconsole_reboot, MCONSOLE_PROC },
 	{ "config", mconsole_config, MCONSOLE_PROC },
 	{ "remove", mconsole_remove, MCONSOLE_PROC },
-	{ "sysrq", mconsole_sysrq, MCONSOLE_INTR },
+	{ "sysrq", mconsole_sysrq, MCONSOLE_PROC },
 	{ "help", mconsole_help, MCONSOLE_INTR },
 	{ "cad", mconsole_cad, MCONSOLE_INTR },
 	{ "stop", mconsole_stop, MCONSOLE_PROC },

arch/um/include/user.h

@@ -14,7 +14,9 @@ extern void *um_kmalloc_atomic(int size);
 extern void kfree(void *ptr);
 extern int in_aton(char *str);
 extern int open_gdb_chan(void);
-extern int strlcpy(char *, const char *, int);
+/* These use size_t, however unsigned long is correct on both i386 and x86_64. */
+extern unsigned long strlcpy(char *, const char *, unsigned long);
+extern unsigned long strlcat(char *, const char *, unsigned long);
 extern void *um_vmalloc(int size);
 extern void vfree(void *ptr);
 

arch/um/kernel/process_kern.c

@@ -82,7 +82,8 @@ unsigned long alloc_stack(int order, int atomic)
 	unsigned long page;
 	int flags = GFP_KERNEL;
 
-	if(atomic) flags |= GFP_ATOMIC;
+	if (atomic)
+		flags = GFP_ATOMIC;
 	page = __get_free_pages(flags, order);
 	if(page == 0)
 		return(0);

arch/um/kernel/sigio_user.c

@@ -340,7 +340,7 @@ static int setup_initial_poll(int fd)
 {
 	struct pollfd *p;
 
-	p = um_kmalloc(sizeof(struct pollfd));
+	p = um_kmalloc_atomic(sizeof(struct pollfd));
 	if(p == NULL){
 		printk("setup_initial_poll : failed to allocate poll\n");
 		return(-1);

arch/um/kernel/tlb.c

@@ -193,11 +193,11 @@ void fix_range_common(struct mm_struct *mm, unsigned long start_addr,
                 r = pte_read(*npte);
                 w = pte_write(*npte);
                 x = pte_exec(*npte);
-                if(!pte_dirty(*npte))
-                        w = 0;
 		if (!pte_young(*npte)) {
 			r = 0;
 			w = 0;
+		} else if (!pte_dirty(*npte)) {
+			w = 0;
 		}
                 if(force || pte_newpage(*npte)){
                         if(pte_present(*npte))

arch/um/kernel/trap_kern.c

@@ -18,6 +18,7 @@
 #include "asm/a.out.h"
 #include "asm/current.h"
 #include "asm/irq.h"
+#include "sysdep/sigcontext.h"
 #include "user_util.h"
 #include "kern_util.h"
 #include "kern.h"
@@ -39,6 +40,12 @@ int handle_page_fault(unsigned long address, unsigned long ip,
 	int err = -EFAULT;
 
 	*code_out = SEGV_MAPERR;
+
+	/* If the fault was during atomic operation, don't take the fault, just
+	 * fail. */
+	if (in_atomic())
+		goto out_nosemaphore;
+
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
 	if(!vma) 
@@ -89,6 +96,7 @@ int handle_page_fault(unsigned long address, unsigned long ip,
 	flush_tlb_page(vma, address);
 out:
 	up_read(&mm->mmap_sem);
+out_nosemaphore:
 	return(err);
 
 /*
@@ -125,7 +133,15 @@ unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc)
         }
 	else if(current->mm == NULL)
 		panic("Segfault with no mm");
+
+	if (SEGV_IS_FIXABLE(&fi))
 		err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);
+	else {
+		err = -EFAULT;
+		/* A thread accessed NULL, we get a fault, but CR2 is invalid.
+		 * This code is used in __do_copy_from_user() of TT mode. */
+		address = 0;
+	}
 
 	catcher = current->thread.fault_catcher;
 	if(!err)

arch/um/kernel/tt/uaccess_user.c

@@ -22,8 +22,15 @@ int __do_copy_from_user(void *to, const void *from, int n,
 			       __do_copy, &faulted);
 	TASK_REGS(get_current())->tt = save;
 
-	if(!faulted) return(0);
+	if(!faulted)
-	else return(n - (fault - (unsigned long) from));
+		return 0;
+	else if (fault)
+		return n - (fault - (unsigned long) from);
+	else
+		/* In case of a general protection fault, we don't have the
+		 * fault address, so NULL is used instead. Pretend we didn't
+		 * copy anything. */
+		return n;
 }
 
 static void __do_strncpy(void *dst, const void *src, int count)

arch/um/kernel/umid.c

@@ -31,6 +31,8 @@ static char *uml_dir = UML_DIR;
 /* Changed by set_umid */
 static int umid_is_random = 1;
 static int umid_inited = 0;
+/* Have we created the files? Should we remove them? */
+static int umid_owned = 0;
 
 static int make_umid(int (*printer)(const char *fmt, ...));
 
@@ -82,20 +84,21 @@ int __init umid_file_name(char *name, char *buf, int len)
 
 extern int tracing_pid;
 
-static int __init create_pid_file(void)
+static void __init create_pid_file(void)
 {
 	char file[strlen(uml_dir) + UMID_LEN + sizeof("/pid\0")];
 	char pid[sizeof("nnnnn\0")];
 	int fd, n;
 
-	if(umid_file_name("pid", file, sizeof(file))) return 0;
+	if(umid_file_name("pid", file, sizeof(file)))
+		return;
 
 	fd = os_open_file(file, of_create(of_excl(of_rdwr(OPENFLAGS()))), 
 			  0644);
 	if(fd < 0){
 		printf("Open of machine pid file \"%s\" failed: %s\n",
 		       file, strerror(-fd));
-		return 0;
+		return;
 	}
 
 	sprintf(pid, "%d\n", os_getpid());
@@ -103,7 +106,6 @@ static int __init create_pid_file(void)
 	if(n != strlen(pid))
 		printf("Write of pid file failed - err = %d\n", -n);
 	os_close_file(fd);
-	return 0;
 }
 
 static int actually_do_remove(char *dir)
@@ -147,7 +149,8 @@ static int actually_do_remove(char *dir)
 void remove_umid_dir(void)
 {
 	char dir[strlen(uml_dir) + UMID_LEN + 1];
-	if(!umid_inited) return;
+	if (!umid_owned)
+		return;
 
 	sprintf(dir, "%s%s", uml_dir, umid);
 	actually_do_remove(dir);
@@ -155,11 +158,12 @@ void remove_umid_dir(void)
 
 char *get_umid(int only_if_set)
 {
-	if(only_if_set && umid_is_random) return(NULL);
+	if(only_if_set && umid_is_random)
-	return(umid);
+		return NULL;
+	return umid;
 }
 
-int not_dead_yet(char *dir)
+static int not_dead_yet(char *dir)
 {
 	char file[strlen(uml_dir) + UMID_LEN + sizeof("/pid\0")];
 	char pid[sizeof("nnnnn\0")], *end;
@@ -193,7 +197,8 @@ int not_dead_yet(char *dir)
 		   (p == CHOOSE_MODE(tracing_pid, os_getpid())))
 			dead = 1;
 	}
-	if(!dead) return(1);
+	if(!dead)
+		return(1);
 	return(actually_do_remove(dir));
 }
 
@@ -232,13 +237,10 @@ static int __init make_uml_dir(void)
 		strlcpy(dir, home, sizeof(dir));
 		uml_dir++;
 	}
+	strlcat(dir, uml_dir, sizeof(dir));
 	len = strlen(dir);
-	strncat(dir, uml_dir, sizeof(dir) - len);
+	if (len > 0 && dir[len - 1] != '/')
-	len = strlen(dir);
+		strlcat(dir, "/", sizeof(dir));
-	if((len > 0) && (len < sizeof(dir) - 1) && (dir[len - 1] != '/')){
-		dir[len] = '/';
-		dir[len + 1] = '\0';
-	}
 
 	uml_dir = malloc(strlen(dir) + 1);
 	if (uml_dir == NULL) {
@@ -286,6 +288,7 @@ static int __init make_umid(int (*printer)(const char *fmt, ...))
 		if(errno == EEXIST){
 			if(not_dead_yet(tmp)){
 				(*printer)("umid '%s' is in use\n", umid);
+				umid_owned = 0;
 				return(-1);
 			}
 			err = mkdir(tmp, 0777);
@@ -296,7 +299,8 @@ static int __init make_umid(int (*printer)(const char *fmt, ...))
 		return(-1);
 	}
 
-	return(0);
+	umid_owned = 1;
+	return 0;
 }
 
 __uml_setup("uml_dir=", set_uml_dir,
@@ -309,7 +313,8 @@ static int __init make_umid_setup(void)
 	/* one function with the ordering we need ... */
 	make_uml_dir();
 	make_umid(printf);
-	return create_pid_file();
+	create_pid_file();
+	return 0;
 }
 __uml_postsetup(make_umid_setup);
 

arch/xtensa/kernel/pci.c

@@ -402,7 +402,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 	__pci_mmap_set_flags(dev, vma, mmap_state);
 	__pci_mmap_set_pgprot(dev, vma, mmap_state, write_combine);
 
-	ret = io_remap_page_range(vma, vma->vm_start, vma->vm_pgoff<<PAGE_SHIFT,
+	ret = io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
 			         vma->vm_end - vma->vm_start,vma->vm_page_prot);
 
 	return ret;

arch/xtensa/kernel/platform.c

@@ -39,7 +39,7 @@ _F(int,  pcibios_fixup, (void), { return 0; });
 _F(int, get_rtc_time, (time_t* t), { return 0; });
 _F(int, set_rtc_time, (time_t t), { return 0; });
 
-#if CONFIG_XTENSA_CALIBRATE_CCOUNT
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 _F(void, calibrate_ccount, (void),
 {
   printk ("ERROR: Cannot calibrate cpu frequency! Assuming 100MHz.\n");

arch/xtensa/kernel/process.c

@@ -457,7 +457,7 @@ int
 dump_task_fpu(struct pt_regs *regs, struct task_struct *task, elf_fpregset_t *r)
 {
 /* see asm/coprocessor.h for this magic number 16 */
-#if TOTAL_CPEXTRA_SIZE > 16
+#if XTENSA_CP_EXTRA_SIZE > 16
 	do_save_fpregs (r, regs, task);
 
 	/*  For now, bit 16 means some extra state may be present:  */

arch/xtensa/kernel/setup.c

@@ -304,7 +304,7 @@ void __init setup_arch(char **cmdline_p)
 # endif
 #endif
 
-#if CONFIG_PCI
+#ifdef CONFIG_PCI
 	platform_pcibios_init();
 #endif
 }

arch/xtensa/kernel/signal.c

@@ -182,7 +182,7 @@ restore_cpextra (struct _cpstate *buf)
 
 	struct task_struct *tsk = current;
 	release_all_cp(tsk);
-	return __copy_from_user(tsk->thread.cpextra, buf, TOTAL_CPEXTRA_SIZE);
+	return __copy_from_user(tsk->thread.cpextra, buf, XTENSA_CP_EXTRA_SIZE);
 #endif
 	return 0;
 }

arch/xtensa/kernel/time.c

@@ -68,7 +68,7 @@ void __init time_init(void)
 	 * speed for the CALIBRATE.
 	 */
 
-#if CONFIG_XTENSA_CALIBRATE_CCOUNT
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 	printk("Calibrating CPU frequency ");
 	platform_calibrate_ccount();
 	printk("%d.%02d MHz\n", (int)ccount_per_jiffy/(1000000/HZ),

arch/xtensa/mm/init.c

@@ -239,7 +239,7 @@ void __init mem_init(void)
 	high_memory = (void *) __va(max_mapnr << PAGE_SHIFT);
 	highmemsize = 0;
 
-#if CONFIG_HIGHMEM
+#ifdef CONFIG_HIGHMEM
 #error HIGHGMEM not implemented in init.c
 #endif
 

drivers/base/class.c

@@ -669,6 +669,7 @@ void class_device_destroy(struct class *cls, dev_t devt)
 int class_device_rename(struct class_device *class_dev, char *new_name)
 {
 	int error = 0;
+	char *old_class_name = NULL, *new_class_name = NULL;
 
 	class_dev = class_device_get(class_dev);
 	if (!class_dev)
@@ -677,12 +678,24 @@ int class_device_rename(struct class_device *class_dev, char *new_name)
 	pr_debug("CLASS: renaming '%s' to '%s'\n", class_dev->class_id,
 		 new_name);
 
+	if (class_dev->dev)
+		old_class_name = make_class_name(class_dev);
+
 	strlcpy(class_dev->class_id, new_name, KOBJ_NAME_LEN);
 
 	error = kobject_rename(&class_dev->kobj, new_name);
 
+	if (class_dev->dev) {
+		new_class_name = make_class_name(class_dev);
+		sysfs_create_link(&class_dev->dev->kobj, &class_dev->kobj,
+				  new_class_name);
+		sysfs_remove_link(&class_dev->dev->kobj, old_class_name);
+	}
 	class_device_put(class_dev);
 
+	kfree(old_class_name);
+	kfree(new_class_name);
+
 	return error;
 }
 

drivers/base/dd.c

@@ -40,6 +40,9 @@
  */
 void device_bind_driver(struct device * dev)
 {
+	if (klist_node_attached(&dev->knode_driver))
+		return;
+
 	pr_debug("bound device '%s' to driver '%s'\n",
 		 dev->bus_id, dev->driver->name);
 	klist_add_tail(&dev->knode_driver, &dev->driver->klist_devices);

drivers/block/ub.c

@@ -172,7 +172,7 @@ struct bulk_cs_wrap {
  */
 struct ub_dev;
 
-#define UB_MAX_REQ_SG	4
+#define UB_MAX_REQ_SG	9	/* cdrecord requires 32KB and maybe a header */
 #define UB_MAX_SECTORS 64
 
 /*
@@ -387,7 +387,7 @@ struct ub_dev {
 	struct bulk_cs_wrap work_bcs;
 	struct usb_ctrlrequest work_cr;
 
-	int sg_stat[UB_MAX_REQ_SG+1];
+	int sg_stat[6];
 	struct ub_scsi_trace tr;
 };
 
@@ -525,12 +525,13 @@ static ssize_t ub_diag_show(struct device *dev, struct device_attribute *attr,
 	    "qlen %d qmax %d\n",
 	    sc->cmd_queue.qlen, sc->cmd_queue.qmax);
 	cnt += sprintf(page + cnt,
-	    "sg %d %d %d %d %d\n",
+	    "sg %d %d %d %d %d .. %d\n",
 	    sc->sg_stat[0],
 	    sc->sg_stat[1],
 	    sc->sg_stat[2],
 	    sc->sg_stat[3],
-	    sc->sg_stat[4]);
+	    sc->sg_stat[4],
+	    sc->sg_stat[5]);
 
 	list_for_each (p, &sc->luns) {
 		lun = list_entry(p, struct ub_lun, link);
@@ -835,7 +836,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
 		return -1;
 	}
 	cmd->nsg = n_elem;
-	sc->sg_stat[n_elem]++;
+	sc->sg_stat[n_elem < 5 ? n_elem : 5]++;
 
 	/*
 	 * build the command
@@ -891,7 +892,7 @@ static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
 		return -1;
 	}
 	cmd->nsg = n_elem;
-	sc->sg_stat[n_elem]++;
+	sc->sg_stat[n_elem < 5 ? n_elem : 5]++;
 
 	memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
 	cmd->cdb_len = rq->cmd_len;
@@ -1010,7 +1011,6 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 	sc->last_pipe = sc->send_bulk_pipe;
 	usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->send_bulk_pipe,
 	    bcb, US_BULK_CB_WRAP_LEN, ub_urb_complete, sc);
-	sc->work_urb.transfer_flags = 0;
 
 	/* Fill what we shouldn't be filling, because usb-storage did so. */
 	sc->work_urb.actual_length = 0;
@@ -1019,7 +1019,6 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 
 	if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
 		/* XXX Clear stalls */
-		printk("ub: cmd #%d start failed (%d)\n", cmd->tag, rc); /* P3 */
 		ub_complete(&sc->work_done);
 		return rc;
 	}
@@ -1190,11 +1189,9 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			return;
 		}
 		if (urb->status != 0) {
-			printk("ub: cmd #%d cmd status (%d)\n", cmd->tag, urb->status); /* P3 */
 			goto Bad_End;
 		}
 		if (urb->actual_length != US_BULK_CB_WRAP_LEN) {
-			printk("ub: cmd #%d xferred %d\n", cmd->tag, urb->actual_length); /* P3 */
 			/* XXX Must do reset here to unconfuse the device */
 			goto Bad_End;
 		}
@@ -1395,14 +1392,12 @@ static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 	usb_fill_bulk_urb(&sc->work_urb, sc->dev, pipe,
 	    page_address(sg->page) + sg->offset, sg->length,
 	    ub_urb_complete, sc);
-	sc->work_urb.transfer_flags = 0;
 	sc->work_urb.actual_length = 0;
 	sc->work_urb.error_count = 0;
 	sc->work_urb.status = 0;
 
 	if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
 		/* XXX Clear stalls */
-		printk("ub: data #%d submit failed (%d)\n", cmd->tag, rc); /* P3 */
 		ub_complete(&sc->work_done);
 		ub_state_done(sc, cmd, rc);
 		return;
@@ -1442,7 +1437,6 @@ static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 	sc->last_pipe = sc->recv_bulk_pipe;
 	usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->recv_bulk_pipe,
 	    &sc->work_bcs, US_BULK_CS_WRAP_LEN, ub_urb_complete, sc);
-	sc->work_urb.transfer_flags = 0;
 	sc->work_urb.actual_length = 0;
 	sc->work_urb.error_count = 0;
 	sc->work_urb.status = 0;
@@ -1563,7 +1557,6 @@ static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
 
 	usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
 	    (unsigned char*) cr, NULL, 0, ub_urb_complete, sc);
-	sc->work_urb.transfer_flags = 0;
 	sc->work_urb.actual_length = 0;
 	sc->work_urb.error_count = 0;
 	sc->work_urb.status = 0;
@@ -2000,17 +1993,16 @@ static int ub_sync_getmaxlun(struct ub_dev *sc)
 
 	usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe,
 	    (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl);
-	sc->work_urb.transfer_flags = 0;
 	sc->work_urb.actual_length = 0;
 	sc->work_urb.error_count = 0;
 	sc->work_urb.status = 0;
 
 	if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
 		if (rc == -EPIPE) {
-			printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+			printk("%s: Stall submitting GetMaxLUN, using 1 LUN\n",
 			     sc->name); /* P3 */
 		} else {
-			printk(KERN_WARNING
+			printk(KERN_NOTICE
 			     "%s: Unable to submit GetMaxLUN (%d)\n",
 			     sc->name, rc);
 		}
@@ -2028,6 +2020,18 @@ static int ub_sync_getmaxlun(struct ub_dev *sc)
 	del_timer_sync(&timer);
 	usb_kill_urb(&sc->work_urb);
 
+	if ((rc = sc->work_urb.status) < 0) {
+		if (rc == -EPIPE) {
+			printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+			     sc->name); /* P3 */
+		} else {
+			printk(KERN_NOTICE
+			     "%s: Error at GetMaxLUN (%d)\n",
+			     sc->name, rc);
+		}
+		goto err_io;
+	}
+
 	if (sc->work_urb.actual_length != 1) {
 		printk("%s: GetMaxLUN returned %d bytes\n", sc->name,
 		    sc->work_urb.actual_length); /* P3 */
@@ -2048,6 +2052,7 @@ static int ub_sync_getmaxlun(struct ub_dev *sc)
 	kfree(p);
 	return nluns;
 
+err_io:
 err_submit:
 	kfree(p);
 err_alloc:
@@ -2080,7 +2085,6 @@ static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe)
 
 	usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
 	    (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
-	sc->work_urb.transfer_flags = 0;
 	sc->work_urb.actual_length = 0;
 	sc->work_urb.error_count = 0;
 	sc->work_urb.status = 0;
@@ -2213,8 +2217,10 @@ static int ub_probe(struct usb_interface *intf,
 	 * This is needed to clear toggles. It is a problem only if we do
 	 * `rmmod ub && modprobe ub` without disconnects, but we like that.
 	 */
+#if 0 /* iPod Mini fails if we do this (big white iPod works) */
 	ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
 	ub_probe_clear_stall(sc, sc->send_bulk_pipe);
+#endif
 
 	/*
 	 * The way this is used by the startup code is a little specific.
@@ -2241,10 +2247,10 @@ static int ub_probe(struct usb_interface *intf,
 	for (i = 0; i < 3; i++) {
 		if ((rc = ub_sync_getmaxlun(sc)) < 0) {
 			/* 
-			 * Some devices (i.e. Iomega Zip100) need this --
+			 * This segment is taken from usb-storage. They say
-			 * apparently the bulk pipes get STALLed when the
+			 * that ZIP-100 needs this, but my own ZIP-100 works
-			 * GetMaxLUN request is processed.
+			 * fine without this.
-			 * XXX I have a ZIP-100, verify it does this.
+			 * Still, it does not seem to hurt anything.
 			 */
 			if (rc == -EPIPE) {
 				ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
@@ -2313,7 +2319,7 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum)
 	disk->first_minor = lun->id * UB_MINORS_PER_MAJOR;
 	disk->fops = &ub_bd_fops;
 	disk->private_data = lun;
-	disk->driverfs_dev = &sc->intf->dev;	/* XXX Many to one ok? */
+	disk->driverfs_dev = &sc->intf->dev;
 
 	rc = -ENOMEM;
 	if ((q = blk_init_queue(ub_request_fn, &sc->lock)) == NULL)
@@ -2466,9 +2472,6 @@ static int __init ub_init(void)
 {
 	int rc;
 
-	/* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu ub_lun %zu\n",
-			sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev), sizeof(struct ub_lun));
-
 	if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
 		goto err_regblkdev;
 	devfs_mk_dir(DEVFS_NAME);

drivers/char/hpet.c

@@ -273,7 +273,6 @@ static int hpet_mmap(struct file *file, struct vm_area_struct *vma)
 
 	vma->vm_flags |= VM_IO;
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-	addr = __pa(addr);
 
 	if (io_remap_pfn_range(vma, vma->vm_start, addr >> PAGE_SHIFT,
 					PAGE_SIZE, vma->vm_page_prot)) {

drivers/char/ipmi/ipmi_msghandler.c

@@ -2620,7 +2620,7 @@ void ipmi_smi_msg_received(ipmi_smi_t          intf,
 	spin_lock_irqsave(&(intf->waiting_msgs_lock), flags);
 	if (!list_empty(&(intf->waiting_msgs))) {
 		list_add_tail(&(msg->link), &(intf->waiting_msgs));
-		spin_unlock(&(intf->waiting_msgs_lock));
+		spin_unlock_irqrestore(&(intf->waiting_msgs_lock), flags);
 		goto out_unlock;
 	}
 	spin_unlock_irqrestore(&(intf->waiting_msgs_lock), flags);
@@ -2629,9 +2629,9 @@ void ipmi_smi_msg_received(ipmi_smi_t          intf,
 	if (rv > 0) {
 		/* Could not handle the message now, just add it to a
                    list to handle later. */
-		spin_lock(&(intf->waiting_msgs_lock));
+		spin_lock_irqsave(&(intf->waiting_msgs_lock), flags);
 		list_add_tail(&(msg->link), &(intf->waiting_msgs));
-		spin_unlock(&(intf->waiting_msgs_lock));
+		spin_unlock_irqrestore(&(intf->waiting_msgs_lock), flags);
 	} else if (rv == 0) {
 		ipmi_free_smi_msg(msg);
 	}

drivers/hwmon/Kconfig

@@ -418,12 +418,11 @@ config SENSORS_HDAPS
 	help
 	  This driver provides support for the IBM Hard Drive Active Protection
 	  System (hdaps), which provides an accelerometer and other misc. data.
-	  Supported laptops include the IBM ThinkPad T41, T42, T43, and R51.
+	  ThinkPads starting with the R50, T41, and X40 are supported.  The
-	  The accelerometer data is readable via sysfs.
+	  accelerometer data is readable via sysfs.
 
-	  This driver also provides an input class device, allowing the
+	  This driver also provides an absolute input class device, allowing
-	  laptop to act as a pinball machine-esque mouse.  This is off by
+	  the laptop to act as a pinball machine-esque joystick.
-	  default but enabled via sysfs or the module parameter "mousedev".
 
 	  Say Y here if you have an applicable laptop and want to experience
 	  the awesome power of hdaps.

drivers/hwmon/hdaps.c

@@ -4,9 +4,9 @@
  * Copyright (C) 2005 Robert Love <rml@novell.com>
  * Copyright (C) 2005 Jesper Juhl <jesper.juhl@gmail.com>
  *
- * The HardDisk Active Protection System (hdaps) is present in the IBM ThinkPad
+ * The HardDisk Active Protection System (hdaps) is present in IBM ThinkPads
- * T41, T42, T43, R50, R50p, R51, and X40, at least.  It provides a basic
+ * starting with the R40, T41, and X40.  It provides a basic two-axis
- * two-axis accelerometer and other data, such as the device's temperature.
+ * accelerometer and other data, such as the device's temperature.
  *
  * This driver is based on the document by Mark A. Smith available at
  * http://www.almaden.ibm.com/cs/people/marksmith/tpaps.html and a lot of trial
@@ -487,24 +487,19 @@ static struct attribute_group hdaps_attribute_group = {
 
 /* Module stuff */
 
-/*
+/* hdaps_dmi_match - found a match.  return one, short-circuiting the hunt. */
- * XXX: We should be able to return nonzero and halt the detection process.
- * But there is a bug in dmi_check_system() where a nonzero return from the
- * first match will result in a return of failure from dmi_check_system().
- * I fixed this; the patch is 2.6-git.  Once in a released tree, we can make
- * hdaps_dmi_match_invert() return hdaps_dmi_match(), which in turn returns 1.
- */
 static int hdaps_dmi_match(struct dmi_system_id *id)
 {
 	printk(KERN_INFO "hdaps: %s detected.\n", id->ident);
-	return 0;
+	return 1;
 }
 
+/* hdaps_dmi_match_invert - found an inverted match. */
 static int hdaps_dmi_match_invert(struct dmi_system_id *id)
 {
 	hdaps_invert = 1;
 	printk(KERN_INFO "hdaps: inverting axis readings.\n");
-	return 0;
+	return hdaps_dmi_match(id);
 }
 
 #define HDAPS_DMI_MATCH_NORMAL(model)	{		\
@@ -534,6 +529,7 @@ static int __init hdaps_init(void)
 		HDAPS_DMI_MATCH_INVERT("ThinkPad R50p"),
 		HDAPS_DMI_MATCH_NORMAL("ThinkPad R50"),
 		HDAPS_DMI_MATCH_NORMAL("ThinkPad R51"),
+		HDAPS_DMI_MATCH_NORMAL("ThinkPad R52"),
 		HDAPS_DMI_MATCH_INVERT("ThinkPad T41p"),
 		HDAPS_DMI_MATCH_NORMAL("ThinkPad T41"),
 		HDAPS_DMI_MATCH_INVERT("ThinkPad T42p"),
@@ -541,6 +537,7 @@ static int __init hdaps_init(void)
 		HDAPS_DMI_MATCH_NORMAL("ThinkPad T43"),
 		HDAPS_DMI_MATCH_NORMAL("ThinkPad X40"),
 		HDAPS_DMI_MATCH_NORMAL("ThinkPad X41 Tablet"),
+		HDAPS_DMI_MATCH_NORMAL("ThinkPad X41"),
 		{ .ident = NULL }
 	};
 

drivers/i2c/busses/Kconfig

@@ -245,6 +245,18 @@ config I2C_KEYWEST
 	  This support is also available as a module.  If so, the module 
 	  will be called i2c-keywest.
 
+config I2C_PMAC_SMU
+	tristate "Powermac SMU I2C interface"
+	depends on I2C && PMAC_SMU
+	help
+	  This supports the use of the I2C interface in the SMU
+	  chip on recent Apple machines like the iMac G5.  It is used
+	  among others by the thermal control driver for those machines.
+	  Say Y if you have such a machine.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-pmac-smu.
+
 config I2C_MPC
 	tristate "MPC107/824x/85xx/52xx"
 	depends on I2C && PPC32

drivers/i2c/busses/Makefile

@@ -20,6 +20,7 @@ obj-$(CONFIG_I2C_ITE)		+= i2c-ite.o
 obj-$(CONFIG_I2C_IXP2000)	+= i2c-ixp2000.o
 obj-$(CONFIG_I2C_IXP4XX)	+= i2c-ixp4xx.o
 obj-$(CONFIG_I2C_KEYWEST)	+= i2c-keywest.o
+obj-$(CONFIG_I2C_PMAC_SMU)	+= i2c-pmac-smu.o
 obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_NFORCE2)	+= i2c-nforce2.o

drivers/i2c/busses/i2c-pmac-smu.c

@@ -0,0 +1,316 @@
+/*
+    i2c Support for Apple SMU Controller
+
+    Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
+                       <benh@kernel.crashing.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+#include <asm/smu.h>
+
+static int probe;
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("I2C driver for Apple's SMU");
+MODULE_LICENSE("GPL");
+module_param(probe, bool, 0);
+
+
+/* Physical interface */
+struct smu_iface
+{
+	struct i2c_adapter	adapter;
+	struct completion	complete;
+	u32			busid;
+};
+
+static void smu_i2c_done(struct smu_i2c_cmd *cmd, void *misc)
+{
+	struct smu_iface	*iface = misc;
+	complete(&iface->complete);
+}
+
+/*
+ * SMBUS-type transfer entrypoint
+ */
+static s32 smu_smbus_xfer(	struct i2c_adapter*	adap,
+				u16			addr,
+				unsigned short		flags,
+				char			read_write,
+				u8			command,
+				int			size,
+				union i2c_smbus_data*	data)
+{
+	struct smu_iface	*iface = i2c_get_adapdata(adap);
+	struct smu_i2c_cmd	cmd;
+	int			rc = 0;
+	int			read = (read_write == I2C_SMBUS_READ);
+
+	cmd.info.bus = iface->busid;
+	cmd.info.devaddr = (addr << 1) | (read ? 0x01 : 0x00);
+
+	/* Prepare datas & select mode */
+	switch (size) {
+        case I2C_SMBUS_QUICK:
+		cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
+		cmd.info.datalen = 0;
+	    	break;
+        case I2C_SMBUS_BYTE:
+		cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
+		cmd.info.datalen = 1;
+		if (!read)
+			cmd.info.data[0] = data->byte;
+	    	break;
+        case I2C_SMBUS_BYTE_DATA:
+		cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+		cmd.info.datalen = 1;
+		cmd.info.sublen = 1;
+		cmd.info.subaddr[0] = command;
+		cmd.info.subaddr[1] = 0;
+		cmd.info.subaddr[2] = 0;
+		if (!read)
+			cmd.info.data[0] = data->byte;
+	    	break;
+        case I2C_SMBUS_WORD_DATA:
+		cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+		cmd.info.datalen = 2;
+		cmd.info.sublen = 1;
+		cmd.info.subaddr[0] = command;
+		cmd.info.subaddr[1] = 0;
+		cmd.info.subaddr[2] = 0;
+		if (!read) {
+			cmd.info.data[0] = data->byte & 0xff;
+			cmd.info.data[1] = (data->byte >> 8) & 0xff;
+		}
+		break;
+	/* Note that these are broken vs. the expected smbus API where
+	 * on reads, the lenght is actually returned from the function,
+	 * but I think the current API makes no sense and I don't want
+	 * any driver that I haven't verified for correctness to go
+	 * anywhere near a pmac i2c bus anyway ...
+	 */
+        case I2C_SMBUS_BLOCK_DATA:
+		cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+		cmd.info.datalen = data->block[0] + 1;
+		if (cmd.info.datalen > 6)
+			return -EINVAL;
+		if (!read)
+			memcpy(cmd.info.data, data->block, cmd.info.datalen);
+		cmd.info.sublen = 1;
+		cmd.info.subaddr[0] = command;
+		cmd.info.subaddr[1] = 0;
+		cmd.info.subaddr[2] = 0;
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+		cmd.info.datalen = data->block[0];
+		if (cmd.info.datalen > 7)
+			return -EINVAL;
+		if (!read)
+			memcpy(cmd.info.data, &data->block[1],
+			       cmd.info.datalen);
+		cmd.info.sublen = 1;
+		cmd.info.subaddr[0] = command;
+		cmd.info.subaddr[1] = 0;
+		cmd.info.subaddr[2] = 0;
+		break;
+
+        default:
+	    	return -EINVAL;
+	}
+
+	/* Turn a standardsub read into a combined mode access */
+ 	if (read_write == I2C_SMBUS_READ &&
+	    cmd.info.type == SMU_I2C_TRANSFER_STDSUB)
+		cmd.info.type = SMU_I2C_TRANSFER_COMBINED;
+
+	/* Finish filling command and submit it */
+	cmd.done = smu_i2c_done;
+	cmd.misc = iface;
+	rc = smu_queue_i2c(&cmd);
+	if (rc < 0)
+		return rc;
+	wait_for_completion(&iface->complete);
+	rc = cmd.status;
+
+	if (!read || rc < 0)
+		return rc;
+
+	switch (size) {
+        case I2C_SMBUS_BYTE:
+        case I2C_SMBUS_BYTE_DATA:
+		data->byte = cmd.info.data[0];
+	    	break;
+        case I2C_SMBUS_WORD_DATA:
+		data->word = ((u16)cmd.info.data[1]) << 8;
+		data->word |= cmd.info.data[0];
+		break;
+	/* Note that these are broken vs. the expected smbus API where
+	 * on reads, the lenght is actually returned from the function,
+	 * but I think the current API makes no sense and I don't want
+	 * any driver that I haven't verified for correctness to go
+	 * anywhere near a pmac i2c bus anyway ...
+	 */
+        case I2C_SMBUS_BLOCK_DATA:
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		memcpy(&data->block[0], cmd.info.data, cmd.info.datalen);
+		break;
+	}
+
+	return rc;
+}
+
+static u32
+smu_smbus_func(struct i2c_adapter * adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+/* For now, we only handle combined mode (smbus) */
+static struct i2c_algorithm smu_algorithm = {
+	.smbus_xfer	= smu_smbus_xfer,
+	.functionality	= smu_smbus_func,
+};
+
+static int create_iface(struct device_node *np, struct device *dev)
+{
+	struct smu_iface* iface;
+	u32 *reg, busid;
+	int rc;
+
+	reg = (u32 *)get_property(np, "reg", NULL);
+	if (reg == NULL) {
+		printk(KERN_ERR "i2c-pmac-smu: can't find bus number !\n");
+		return -ENXIO;
+	}
+	busid = *reg;
+
+	iface = kmalloc(sizeof(struct smu_iface), GFP_KERNEL);
+	if (iface == NULL) {
+		printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n");
+		return -ENOMEM;
+	}
+	memset(iface, 0, sizeof(struct smu_iface));
+	init_completion(&iface->complete);
+	iface->busid = busid;
+
+	dev_set_drvdata(dev, iface);
+
+	sprintf(iface->adapter.name, "smu-i2c-%02x", busid);
+	iface->adapter.algo = &smu_algorithm;
+	iface->adapter.algo_data = NULL;
+	iface->adapter.client_register = NULL;
+	iface->adapter.client_unregister = NULL;
+	i2c_set_adapdata(&iface->adapter, iface);
+	iface->adapter.dev.parent = dev;
+
+	rc = i2c_add_adapter(&iface->adapter);
+	if (rc) {
+		printk(KERN_ERR "i2c-pamc-smu.c: Adapter %s registration "
+		       "failed\n", iface->adapter.name);
+		i2c_set_adapdata(&iface->adapter, NULL);
+	}
+
+	if (probe) {
+		unsigned char addr;
+		printk("Probe: ");
+		for (addr = 0x00; addr <= 0x7f; addr++) {
+			if (i2c_smbus_xfer(&iface->adapter,addr,
+					   0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
+				printk("%02x ", addr);
+		}
+		printk("\n");
+	}
+
+	printk(KERN_INFO "SMU i2c bus %x registered\n", busid);
+
+	return 0;
+}
+
+static int dispose_iface(struct device *dev)
+{
+	struct smu_iface *iface = dev_get_drvdata(dev);
+	int rc;
+
+	rc = i2c_del_adapter(&iface->adapter);
+	i2c_set_adapdata(&iface->adapter, NULL);
+	/* We aren't that prepared to deal with this... */
+	if (rc)
+		printk("i2c-pmac-smu.c: Failed to remove bus %s !\n",
+		       iface->adapter.name);
+	dev_set_drvdata(dev, NULL);
+	kfree(iface);
+
+	return 0;
+}
+
+
+static int create_iface_of_platform(struct of_device* dev,
+				    const struct of_device_id *match)
+{
+	return create_iface(dev->node, &dev->dev);
+}
+
+
+static int dispose_iface_of_platform(struct of_device* dev)
+{
+	return dispose_iface(&dev->dev);
+}
+
+
+static struct of_device_id i2c_smu_match[] =
+{
+	{
+		.compatible	= "smu-i2c",
+	},
+	{},
+};
+static struct of_platform_driver i2c_smu_of_platform_driver =
+{
+	.name 		= "i2c-smu",
+	.match_table	= i2c_smu_match,
+	.probe		= create_iface_of_platform,
+	.remove		= dispose_iface_of_platform
+};
+
+
+static int __init i2c_pmac_smu_init(void)
+{
+	of_register_driver(&i2c_smu_of_platform_driver);
+	return 0;
+}
+
+
+static void __exit i2c_pmac_smu_cleanup(void)
+{
+	of_unregister_driver(&i2c_smu_of_platform_driver);
+}
+
+module_init(i2c_pmac_smu_init);
+module_exit(i2c_pmac_smu_cleanup);

drivers/input/input.c

@@ -308,6 +308,7 @@ static struct input_device_id *input_match_device(struct input_device_id *id, st
 		MATCH_BIT(ledbit, LED_MAX);
 		MATCH_BIT(sndbit, SND_MAX);
 		MATCH_BIT(ffbit,  FF_MAX);
+		MATCH_BIT(swbit,  SW_MAX);
 
 		return id;
 	}

drivers/isdn/hisax/st5481_b.c

@@ -209,9 +209,7 @@ static void st5481B_mode(struct st5481_bcs *bcs, int mode)
 	bcs->mode = mode;
 
 	// Cancel all USB transfers on this B channel
-	b_out->urb[0]->transfer_flags |= URB_ASYNC_UNLINK;
 	usb_unlink_urb(b_out->urb[0]);
-	b_out->urb[1]->transfer_flags |= URB_ASYNC_UNLINK;
 	usb_unlink_urb(b_out->urb[1]);
 	b_out->busy = 0;
 

drivers/isdn/hisax/st5481_usb.c

@@ -645,9 +645,7 @@ void st5481_in_mode(struct st5481_in *in, int mode)
 
 	in->mode = mode;
 
-	in->urb[0]->transfer_flags |= URB_ASYNC_UNLINK;
 	usb_unlink_urb(in->urb[0]);
-	in->urb[1]->transfer_flags |= URB_ASYNC_UNLINK;
 	usb_unlink_urb(in->urb[1]);
 
 	if (in->mode != L1_MODE_NULL) {

drivers/macintosh/therm_adt746x.c

@@ -599,7 +599,7 @@ thermostat_init(void)
 		sensor_location[2] = "?";
 	}
 
-	of_dev = of_platform_device_create(np, "temperatures");
+	of_dev = of_platform_device_create(np, "temperatures", NULL);
 	
 	if (of_dev == NULL) {
 		printk(KERN_ERR "Can't register temperatures device !\n");

drivers/macintosh/therm_pm72.c

@@ -2051,7 +2051,7 @@ static int __init therm_pm72_init(void)
 			    return -ENODEV;
 		}
 	}
-	of_dev = of_platform_device_create(np, "temperature");
+	of_dev = of_platform_device_create(np, "temperature", NULL);
 	if (of_dev == NULL) {
 		printk(KERN_ERR "Can't register FCU platform device !\n");
 		return -ENODEV;

drivers/macintosh/therm_windtunnel.c

@@ -504,7 +504,7 @@ g4fan_init( void )
 	}
 	if( !(np=of_find_node_by_name(NULL, "fan")) )
 		return -ENODEV;
-	x.of_dev = of_platform_device_create( np, "temperature" );
+	x.of_dev = of_platform_device_create(np, "temperature", NULL);
 	of_node_put( np );
 
 	if( !x.of_dev ) {

drivers/media/video/bttv-driver.c

@@ -763,7 +763,7 @@ static void set_pll(struct bttv *btv)
                 /* no PLL needed */
                 if (btv->pll.pll_current == 0)
                         return;
-		vprintk(KERN_INFO "bttv%d: PLL can sleep, using XTAL (%d).\n",
+		bttv_printk(KERN_INFO "bttv%d: PLL can sleep, using XTAL (%d).\n",
                            btv->c.nr,btv->pll.pll_ifreq);
                 btwrite(0x00,BT848_TGCTRL);
                 btwrite(0x00,BT848_PLL_XCI);
@@ -771,13 +771,13 @@ static void set_pll(struct bttv *btv)
                 return;
         }
 
-	vprintk(KERN_INFO "bttv%d: PLL: %d => %d ",btv->c.nr,
+	bttv_printk(KERN_INFO "bttv%d: PLL: %d => %d ",btv->c.nr,
                    btv->pll.pll_ifreq, btv->pll.pll_ofreq);
 	set_pll_freq(btv, btv->pll.pll_ifreq, btv->pll.pll_ofreq);
 
         for (i=0; i<10; i++) {
 		/*  Let other people run while the PLL stabilizes */
-		vprintk(".");
+		bttv_printk(".");
 		msleep(10);
 
                 if (btread(BT848_DSTATUS) & BT848_DSTATUS_PLOCK) {
@@ -785,12 +785,12 @@ static void set_pll(struct bttv *btv)
                 } else {
                         btwrite(0x08,BT848_TGCTRL);
                         btv->pll.pll_current = btv->pll.pll_ofreq;
-			vprintk(" ok\n");
+			bttv_printk(" ok\n");
                         return;
                 }
         }
         btv->pll.pll_current = -1;
-	vprintk("failed\n");
+	bttv_printk("failed\n");
         return;
 }
 

drivers/media/video/bttvp.h

@@ -221,7 +221,7 @@ extern void bttv_gpio_tracking(struct bttv *btv, char *comment);
 extern int init_bttv_i2c(struct bttv *btv);
 extern int fini_bttv_i2c(struct bttv *btv);
 
-#define vprintk  if (bttv_verbose) printk
+#define bttv_printk if (bttv_verbose) printk
 #define dprintk  if (bttv_debug >= 1) printk
 #define d2printk if (bttv_debug >= 2) printk
 

drivers/mfd/ucb1x00-ts.c

@@ -48,8 +48,8 @@ struct ucb1x00_ts {
 	u16			x_res;
 	u16			y_res;
 
-	int			restart:1;
+	unsigned int		restart:1;
-	int			adcsync:1;
+	unsigned int		adcsync:1;
 };
 
 static int adcsync;

drivers/mtd/devices/docecc.c

@@ -40,7 +40,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/doc2000.h>
 
-#define DEBUG 0
+#define DEBUG_ECC 0
 /* need to undef it (from asm/termbits.h) */
 #undef B0
 
@@ -249,7 +249,7 @@ eras_dec_rs(dtype Alpha_to[NN + 1], dtype Index_of[NN + 1],
 	  lambda[j] ^= Alpha_to[modnn(u + tmp)];
       }
     }
-#if DEBUG >= 1
+#if DEBUG_ECC >= 1
     /* Test code that verifies the erasure locator polynomial just constructed
        Needed only for decoder debugging. */
     
@@ -276,7 +276,7 @@ eras_dec_rs(dtype Alpha_to[NN + 1], dtype Index_of[NN + 1],
       count = -1;
       goto finish;
     }
-#if DEBUG >= 2
+#if DEBUG_ECC >= 2
     printf("\n Erasure positions as determined by roots of Eras Loc Poly:\n");
     for (i = 0; i < count; i++)
       printf("%d ", loc[i]);
@@ -409,7 +409,7 @@ eras_dec_rs(dtype Alpha_to[NN + 1], dtype Index_of[NN + 1],
 	den ^= Alpha_to[modnn(lambda[i+1] + i * root[j])];
     }
     if (den == 0) {
-#if DEBUG >= 1
+#if DEBUG_ECC >= 1
       printf("\n ERROR: denominator = 0\n");
 #endif
       /* Convert to dual- basis */

drivers/net/8390.c

@@ -1094,7 +1094,7 @@ static void NS8390_trigger_send(struct net_device *dev, unsigned int length,
    
 	outb_p(E8390_NODMA+E8390_PAGE0, e8390_base+E8390_CMD);
     
-	if (inb_p(e8390_base) & E8390_TRANS) 
+	if (inb_p(e8390_base + E8390_CMD) & E8390_TRANS) 
 	{
 		printk(KERN_WARNING "%s: trigger_send() called with the transmitter busy.\n",
 			dev->name);

drivers/net/bonding/bond_main.c

@@ -1653,7 +1653,8 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
 	int old_features = bond_dev->features;
 	int res = 0;
 
-	if (slave_dev->do_ioctl == NULL) {
+	if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
+		slave_dev->do_ioctl == NULL) {
 		printk(KERN_WARNING DRV_NAME
 		       ": Warning : no link monitoring support for %s\n",
 		       slave_dev->name);

drivers/net/r8169.c

@@ -100,11 +100,11 @@ VERSION 2.2LK	<2005/01/25>
 
 #ifdef CONFIG_R8169_NAPI
 #define rtl8169_rx_skb			netif_receive_skb
-#define rtl8169_rx_hwaccel_skb		vlan_hwaccel_rx
+#define rtl8169_rx_hwaccel_skb		vlan_hwaccel_receive_skb
 #define rtl8169_rx_quota(count, quota)	min(count, quota)
 #else
 #define rtl8169_rx_skb			netif_rx
-#define rtl8169_rx_hwaccel_skb		vlan_hwaccel_receive_skb
+#define rtl8169_rx_hwaccel_skb		vlan_hwaccel_rx
 #define rtl8169_rx_quota(count, quota)	count
 #endif
 

drivers/net/skge.c

@@ -42,7 +42,7 @@
 #include "skge.h"
 
 #define DRV_NAME		"skge"
-#define DRV_VERSION		"1.0"
+#define DRV_VERSION		"1.1"
 #define PFX			DRV_NAME " "
 
 #define DEFAULT_TX_RING_SIZE	128
@@ -105,41 +105,28 @@ static const u32 rxirqmask[] = { IS_R1_F, IS_R2_F };
 static const u32 txirqmask[] = { IS_XA1_F, IS_XA2_F };
 static const u32 portirqmask[] = { IS_PORT_1, IS_PORT_2 };
 
-/* Don't need to look at whole 16K.
- * last interesting register is descriptor poll timer.
- */
-#define SKGE_REGS_LEN	(29*128)
-
 static int skge_get_regs_len(struct net_device *dev)
 {
-	return SKGE_REGS_LEN;
+	return 0x4000;
 }
 
 /*
- * Returns copy of control register region
+ * Returns copy of whole control register region
- * I/O region is divided into banks and certain regions are unreadable
+ * Note: skip RAM address register because accessing it will
+ * 	 cause bus hangs!
  */
 static void skge_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 			  void *p)
 {
 	const struct skge_port *skge = netdev_priv(dev);
-	unsigned long offs;
 	const void __iomem *io = skge->hw->regs;
-	static const unsigned long bankmap
-		= (1<<0) | (1<<2) | (1<<8) | (1<<9)
-		  | (1<<12) | (1<<13) | (1<<14) | (1<<15) | (1<<16)
-		  | (1<<17) | (1<<20) | (1<<21) | (1<<22) | (1<<23)
-		  | (1<<24)  | (1<<25) | (1<<26) | (1<<27) | (1<<28);
 
 	regs->version = 1;
-	for (offs = 0; offs < regs->len; offs += 128) {
+	memset(p, 0, regs->len);
-		u32 len = min_t(u32, 128, regs->len - offs);
+	memcpy_fromio(p, io, B3_RAM_ADDR);
 
-		if (bankmap & (1<<(offs/128)))
+	memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1,
-			memcpy_fromio(p + offs, io + offs, len);
+		      regs->len - B3_RI_WTO_R1);
-		else
-			memset(p + offs, 0, len);
-	}
 }
 
 /* Wake on Lan only supported on Yukon chps with rev 1 or above */
@@ -775,17 +762,6 @@ static int skge_ring_alloc(struct skge_ring *ring, void *vaddr, u64 base)
 	return 0;
 }
 
-static struct sk_buff *skge_rx_alloc(struct net_device *dev, unsigned int size)
-{
-	struct sk_buff *skb = dev_alloc_skb(size);
-
-	if (likely(skb)) {
-		skb->dev = dev;
-		skb_reserve(skb, NET_IP_ALIGN);
-	}
-	return skb;
-}
-
 /* Allocate and setup a new buffer for receiving */
 static void skge_rx_setup(struct skge_port *skge, struct skge_element *e,
 			  struct sk_buff *skb, unsigned int bufsize)
@@ -858,16 +834,17 @@ static int skge_rx_fill(struct skge_port *skge)
 {
 	struct skge_ring *ring = &skge->rx_ring;
 	struct skge_element *e;
-	unsigned int bufsize = skge->rx_buf_size;
 
 	e = ring->start;
 	do {
-		struct sk_buff *skb = skge_rx_alloc(skge->netdev, bufsize);
+		struct sk_buff *skb;
 
+		skb = dev_alloc_skb(skge->rx_buf_size + NET_IP_ALIGN);
 		if (!skb)
 			return -ENOMEM;
 
-		skge_rx_setup(skge, e, skb, bufsize);
+		skb_reserve(skb, NET_IP_ALIGN);
+		skge_rx_setup(skge, e, skb, skge->rx_buf_size);
 	} while ( (e = e->next) != ring->start);
 
 	ring->to_clean = ring->start;
@@ -1666,6 +1643,22 @@ static void yukon_reset(struct skge_hw *hw, int port)
 			 | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
 }
 
+/* Apparently, early versions of Yukon-Lite had wrong chip_id? */
+static int is_yukon_lite_a0(struct skge_hw *hw)
+{
+	u32 reg;
+	int ret;
+
+	if (hw->chip_id != CHIP_ID_YUKON)
+		return 0;
+
+	reg = skge_read32(hw, B2_FAR);
+	skge_write8(hw, B2_FAR + 3, 0xff);
+	ret = (skge_read8(hw, B2_FAR + 3) != 0);
+	skge_write32(hw, B2_FAR, reg);
+	return ret;
+}
+
 static void yukon_mac_init(struct skge_hw *hw, int port)
 {
 	struct skge_port *skge = netdev_priv(hw->dev[port]);
@@ -1781,9 +1774,11 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
 	/* Configure Rx MAC FIFO */
 	skge_write16(hw, SK_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK);
 	reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
-	if (hw->chip_id == CHIP_ID_YUKON_LITE &&
+
-	    hw->chip_rev >= CHIP_REV_YU_LITE_A3)
+	/* disable Rx GMAC FIFO Flush for YUKON-Lite Rev. A0 only */
+	if (is_yukon_lite_a0(hw))
 		reg &= ~GMF_RX_F_FL_ON;
+
 	skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
 	skge_write16(hw, SK_REG(port, RX_GMF_CTRL_T), reg);
 	/*
@@ -2442,6 +2437,14 @@ static void yukon_set_multicast(struct net_device *dev)
 	gma_write16(hw, port, GM_RX_CTRL, reg);
 }
 
+static inline u16 phy_length(const struct skge_hw *hw, u32 status)
+{
+	if (hw->chip_id == CHIP_ID_GENESIS)
+		return status >> XMR_FS_LEN_SHIFT;
+	else
+		return status >> GMR_FS_LEN_SHIFT;
+}
+
 static inline int bad_phy_status(const struct skge_hw *hw, u32 status)
 {
 	if (hw->chip_id == CHIP_ID_GENESIS)
@@ -2451,16 +2454,81 @@ static inline int bad_phy_status(const struct skge_hw *hw, u32 status)
 			(status & GMR_FS_RX_OK) == 0;
 }
 
-static void skge_rx_error(struct skge_port *skge, int slot,
+
-			  u32 control, u32 status)
+/* Get receive buffer from descriptor.
+ * Handles copy of small buffers and reallocation failures
+ */
+static inline struct sk_buff *skge_rx_get(struct skge_port *skge,
+					  struct skge_element *e,
+					  u32 control, u32 status, u16 csum)
 {
-	if (netif_msg_rx_err(skge))
+	struct sk_buff *skb;
-		printk(KERN_DEBUG PFX "%s: rx err, slot %d control 0x%x status 0x%x\n",
+	u16 len = control & BMU_BBC;
-		       skge->netdev->name, slot, control, status);
+
+	if (unlikely(netif_msg_rx_status(skge)))
+		printk(KERN_DEBUG PFX "%s: rx slot %td status 0x%x len %d\n",
+		       skge->netdev->name, e - skge->rx_ring.start,
+		       status, len);
+
+	if (len > skge->rx_buf_size)
+		goto error;
 
 	if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF))
-		skge->net_stats.rx_length_errors++;
+		goto error;
-	else if (skge->hw->chip_id == CHIP_ID_GENESIS) {
+
+	if (bad_phy_status(skge->hw, status))
+		goto error;
+
+	if (phy_length(skge->hw, status) != len)
+		goto error;
+
+	if (len < RX_COPY_THRESHOLD) {
+		skb = dev_alloc_skb(len + 2);
+		if (!skb)
+			goto resubmit;
+
+		skb_reserve(skb, 2);
+		pci_dma_sync_single_for_cpu(skge->hw->pdev,
+					    pci_unmap_addr(e, mapaddr),
+					    len, PCI_DMA_FROMDEVICE);
+		memcpy(skb->data, e->skb->data, len);
+		pci_dma_sync_single_for_device(skge->hw->pdev,
+					       pci_unmap_addr(e, mapaddr),
+					       len, PCI_DMA_FROMDEVICE);
+		skge_rx_reuse(e, skge->rx_buf_size);
+	} else {
+		struct sk_buff *nskb;
+		nskb = dev_alloc_skb(skge->rx_buf_size + NET_IP_ALIGN);
+		if (!nskb)
+			goto resubmit;
+
+		pci_unmap_single(skge->hw->pdev,
+				 pci_unmap_addr(e, mapaddr),
+				 pci_unmap_len(e, maplen),
+				 PCI_DMA_FROMDEVICE);
+		skb = e->skb;
+  		prefetch(skb->data);
+		skge_rx_setup(skge, e, nskb, skge->rx_buf_size);
+	}
+
+	skb_put(skb, len);
+	skb->dev = skge->netdev;
+	if (skge->rx_csum) {
+		skb->csum = csum;
+		skb->ip_summed = CHECKSUM_HW;
+	}
+
+	skb->protocol = eth_type_trans(skb, skge->netdev);
+
+	return skb;
+error:
+
+	if (netif_msg_rx_err(skge))
+		printk(KERN_DEBUG PFX "%s: rx err, slot %td control 0x%x status 0x%x\n",
+		       skge->netdev->name, e - skge->rx_ring.start,
+		       control, status);
+
+	if (skge->hw->chip_id == CHIP_ID_GENESIS) {
 		if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR))
 			skge->net_stats.rx_length_errors++;
 		if (status & XMR_FS_FRA_ERR)
@@ -2475,56 +2543,10 @@ static void skge_rx_error(struct skge_port *skge, int slot,
 		if (status & GMR_FS_CRC_ERR)
 			skge->net_stats.rx_crc_errors++;
 	}
-}
 
-/* Get receive buffer from descriptor.
+resubmit:
- * Handles copy of small buffers and reallocation failures
- */
-static inline struct sk_buff *skge_rx_get(struct skge_port *skge,
-					  struct skge_element *e,
-					  unsigned int len)
-{
-	struct sk_buff *nskb, *skb;
-
-	if (len < RX_COPY_THRESHOLD) {
-		nskb = skge_rx_alloc(skge->netdev, len + NET_IP_ALIGN);
-		if (unlikely(!nskb))
-			return NULL;
-
-		pci_dma_sync_single_for_cpu(skge->hw->pdev,
-					    pci_unmap_addr(e, mapaddr),
-					    len, PCI_DMA_FROMDEVICE);
-		memcpy(nskb->data, e->skb->data, len);
-		pci_dma_sync_single_for_device(skge->hw->pdev,
-					       pci_unmap_addr(e, mapaddr),
-					       len, PCI_DMA_FROMDEVICE);
-
-		if (skge->rx_csum) {
-			struct skge_rx_desc *rd = e->desc;
-			nskb->csum = le16_to_cpu(rd->csum2);
-			nskb->ip_summed = CHECKSUM_HW;
-		}
 	skge_rx_reuse(e, skge->rx_buf_size);
-		return nskb;
-	} else {
-		nskb = skge_rx_alloc(skge->netdev, skge->rx_buf_size);
-		if (unlikely(!nskb))
 	return NULL;
-
-		pci_unmap_single(skge->hw->pdev,
-				 pci_unmap_addr(e, mapaddr),
-				 pci_unmap_len(e, maplen),
-				 PCI_DMA_FROMDEVICE);
-		skb = e->skb;
-		if (skge->rx_csum) {
-			struct skge_rx_desc *rd = e->desc;
-			skb->csum = le16_to_cpu(rd->csum2);
-			skb->ip_summed = CHECKSUM_HW;
-		}
-
-		skge_rx_setup(skge, e, nskb, skge->rx_buf_size);
-		return skb;
-	}
 }
 
 
@@ -2540,32 +2562,16 @@ static int skge_poll(struct net_device *dev, int *budget)
 	for (e = ring->to_clean; work_done < to_do; e = e->next) {
 		struct skge_rx_desc *rd = e->desc;
 		struct sk_buff *skb;
-		u32 control, len, status;
+		u32 control;
 
 		rmb();
 		control = rd->control;
 		if (control & BMU_OWN)
 			break;
 
-		len = control & BMU_BBC;
+ 		skb = skge_rx_get(skge, e, control, rd->status,
-		status = rd->status;
+ 				  le16_to_cpu(rd->csum2));
-
-		if (unlikely((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF)
-			     || bad_phy_status(hw, status))) {
-			skge_rx_error(skge, e - ring->start, control, status);
-			skge_rx_reuse(e, skge->rx_buf_size);
-			continue;
-		}
-
-		if (netif_msg_rx_status(skge))
-		    printk(KERN_DEBUG PFX "%s: rx slot %td status 0x%x len %d\n",
-			   dev->name, e - ring->start, rd->status, len);
-
-		skb = skge_rx_get(skge, e, len);
 		if (likely(skb)) {
-			skb_put(skb, len);
-			skb->protocol = eth_type_trans(skb, dev);
-
 			dev->last_rx = jiffies;
 			netif_receive_skb(skb);
 

drivers/net/skge.h

@@ -953,6 +953,7 @@ enum {
  */
 enum {
 	XMR_FS_LEN	= 0x3fff<<18,	/* Bit 31..18:	Rx Frame Length */
+	XMR_FS_LEN_SHIFT = 18,
 	XMR_FS_2L_VLAN	= 1<<17, /* Bit 17:	tagged wh 2Lev VLAN ID*/
 	XMR_FS_1_VLAN	= 1<<16, /* Bit 16:	tagged wh 1ev VLAN ID*/
 	XMR_FS_BC	= 1<<15, /* Bit 15:	Broadcast Frame */
@@ -1868,6 +1869,7 @@ enum {
 /* Receive Frame Status Encoding */
 enum {
 	GMR_FS_LEN	= 0xffff<<16, /* Bit 31..16:	Rx Frame Length */
+	GMR_FS_LEN_SHIFT = 16,
 	GMR_FS_VLAN	= 1<<13, /* Bit 13:	VLAN Packet */
 	GMR_FS_JABBER	= 1<<12, /* Bit 12:	Jabber Packet */
 	GMR_FS_UN_SIZE	= 1<<11, /* Bit 11:	Undersize Packet */

drivers/pci/hotplug.c

@@ -7,7 +7,6 @@ int pci_hotplug (struct device *dev, char **envp, int num_envp,
 		 char *buffer, int buffer_size)
 {
 	struct pci_dev *pdev;
-	char *scratch;
 	int i = 0;
 	int length = 0;
 
@@ -18,9 +17,6 @@ int pci_hotplug (struct device *dev, char **envp, int num_envp,
 	if (!pdev)
 		return -ENODEV;
 
-	scratch = buffer;
-
-
 	if (add_hotplug_env_var(envp, num_envp, &i,
 				buffer, buffer_size, &length,
 				"PCI_CLASS=%04X", pdev->class))

drivers/pci/hotplug/rpadlpar_sysfs.c

@@ -62,7 +62,7 @@ static ssize_t add_slot_store(struct dlpar_io_attr *dlpar_attr,
 	char drc_name[MAX_DRC_NAME_LEN];
 	char *end;
 
-	if (nbytes > MAX_DRC_NAME_LEN)
+	if (nbytes >= MAX_DRC_NAME_LEN)
 		return 0;
 
 	memcpy(drc_name, buf, nbytes);
@@ -83,7 +83,7 @@ static ssize_t remove_slot_store(struct dlpar_io_attr *dlpar_attr,
 	char drc_name[MAX_DRC_NAME_LEN];
 	char *end;
 
-	if (nbytes > MAX_DRC_NAME_LEN)
+	if (nbytes >= MAX_DRC_NAME_LEN)
 		return 0;
 
 	memcpy(drc_name, buf, nbytes);

drivers/pci/hotplug/sgi_hotplug.c

@@ -159,7 +159,7 @@ static int sn_hp_slot_private_alloc(struct hotplug_slot *bss_hotplug_slot,
 
 	pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus);
 
-	slot = kcalloc(1, sizeof(*slot), GFP_KERNEL);
+	slot = kzalloc(sizeof(*slot), GFP_KERNEL);
 	if (!slot)
 		return -ENOMEM;
 	bss_hotplug_slot->private = slot;
@@ -491,7 +491,7 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
 		if (sn_pci_slot_valid(pci_bus, device) != 1)
 			continue;
 
-		bss_hotplug_slot = kcalloc(1, sizeof(*bss_hotplug_slot),
+		bss_hotplug_slot = kzalloc(sizeof(*bss_hotplug_slot),
 					   GFP_KERNEL);
 		if (!bss_hotplug_slot) {
 			rc = -ENOMEM;
@@ -499,7 +499,7 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
 		}
 
 		bss_hotplug_slot->info =
-			kcalloc(1, sizeof(struct hotplug_slot_info),
+			kzalloc(sizeof(struct hotplug_slot_info),
 				GFP_KERNEL);
 		if (!bss_hotplug_slot->info) {
 			rc = -ENOMEM;

drivers/pci/pci-sysfs.c

@@ -360,7 +360,7 @@ pci_create_resource_files(struct pci_dev *pdev)
 			continue;
 
 		/* allocate attribute structure, piggyback attribute name */
-		res_attr = kcalloc(1, sizeof(*res_attr) + 10, GFP_ATOMIC);
+		res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC);
 		if (res_attr) {
 			char *res_attr_name = (char *)(res_attr + 1);
 

drivers/pci/probe.c

@@ -165,7 +165,7 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
 		if (l == 0xffffffff)
 			l = 0;
 		if ((l & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY) {
-			sz = pci_size(l, sz, PCI_BASE_ADDRESS_MEM_MASK);
+			sz = pci_size(l, sz, (u32)PCI_BASE_ADDRESS_MEM_MASK);
 			if (!sz)
 				continue;
 			res->start = l & PCI_BASE_ADDRESS_MEM_MASK;
@@ -215,7 +215,7 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
 		if (l == 0xffffffff)
 			l = 0;
 		if (sz && sz != 0xffffffff) {
-			sz = pci_size(l, sz, PCI_ROM_ADDRESS_MASK);
+			sz = pci_size(l, sz, (u32)PCI_ROM_ADDRESS_MASK);
 			if (sz) {
 				res->flags = (l & IORESOURCE_ROM_ENABLE) |
 				  IORESOURCE_MEM | IORESOURCE_PREFETCH |
@@ -402,6 +402,12 @@ static void pci_enable_crs(struct pci_dev *dev)
 static void __devinit pci_fixup_parent_subordinate_busnr(struct pci_bus *child, int max)
 {
 	struct pci_bus *parent = child->parent;
+
+	/* Attempts to fix that up are really dangerous unless
+	   we're going to re-assign all bus numbers. */
+	if (!pcibios_assign_all_busses())
+		return;
+
 	while (parent->parent && parent->subordinate < max) {
 		parent->subordinate = max;
 		pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, max);
@@ -478,8 +484,18 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max
 		 * We need to assign a number to this bus which we always
 		 * do in the second pass.
 		 */
-		if (!pass)
+		if (!pass) {
+			if (pcibios_assign_all_busses())
+				/* Temporarily disable forwarding of the
+				   configuration cycles on all bridges in
+				   this bus segment to avoid possible
+				   conflicts in the second pass between two
+				   bridges programmed with overlapping
+				   bus ranges. */
+				pci_write_config_dword(dev, PCI_PRIMARY_BUS,
+						       buses & ~0xffffff);
 			return max;
+		}
 
 		/* Clear errors */
 		pci_write_config_word(dev, PCI_STATUS, 0xffff);

drivers/s390/cio/ccwgroup.c

@@ -437,7 +437,7 @@ __ccwgroup_get_gdev_by_cdev(struct ccw_device *cdev)
 	if (cdev->dev.driver_data) {
 		gdev = (struct ccwgroup_device *)cdev->dev.driver_data;
 		if (get_device(&gdev->dev)) {
-			if (klist_node_attached(&gdev->dev.knode_bus))
+			if (device_is_registered(&gdev->dev))
 				return gdev;
 			put_device(&gdev->dev);
 		}

drivers/scsi/ata_piix.c

@@ -442,7 +442,6 @@ static void piix_sata_phy_reset(struct ata_port *ap)
  *	piix_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
  *	@adev: um
- *	@pio: PIO mode, 0 - 4
  *
  *	Set PIO mode for device, in host controller PCI config space.
  *

drivers/scsi/libata-core.c

@@ -4131,6 +4131,53 @@ int ata_device_add(struct ata_probe_ent *ent)
 	return 0;
 }
 
+/**
+ *	ata_host_set_remove - PCI layer callback for device removal
+ *	@host_set: ATA host set that was removed
+ *
+ *	Unregister all objects associated with this host set. Free those 
+ *	objects.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ */
+
+
+void ata_host_set_remove(struct ata_host_set *host_set)
+{
+	struct ata_port *ap;
+	unsigned int i;
+
+	for (i = 0; i < host_set->n_ports; i++) {
+		ap = host_set->ports[i];
+		scsi_remove_host(ap->host);
+	}
+
+	free_irq(host_set->irq, host_set);
+
+	for (i = 0; i < host_set->n_ports; i++) {
+		ap = host_set->ports[i];
+
+		ata_scsi_release(ap->host);
+
+		if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) {
+			struct ata_ioports *ioaddr = &ap->ioaddr;
+
+			if (ioaddr->cmd_addr == 0x1f0)
+				release_region(0x1f0, 8);
+			else if (ioaddr->cmd_addr == 0x170)
+				release_region(0x170, 8);
+		}
+
+		scsi_host_put(ap->host);
+	}
+
+	if (host_set->ops->host_stop)
+		host_set->ops->host_stop(host_set);
+
+	kfree(host_set);
+}
+
 /**
  *	ata_scsi_release - SCSI layer callback hook for host unload
  *	@host: libata host to be unloaded
@@ -4471,39 +4518,8 @@ void ata_pci_remove_one (struct pci_dev *pdev)
 {
 	struct device *dev = pci_dev_to_dev(pdev);
 	struct ata_host_set *host_set = dev_get_drvdata(dev);
-	struct ata_port *ap;
-	unsigned int i;
-
-	for (i = 0; i < host_set->n_ports; i++) {
-		ap = host_set->ports[i];
-
-		scsi_remove_host(ap->host);
-	}
-
-	free_irq(host_set->irq, host_set);
-
-	for (i = 0; i < host_set->n_ports; i++) {
-		ap = host_set->ports[i];
-
-		ata_scsi_release(ap->host);
-
-		if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) {
-			struct ata_ioports *ioaddr = &ap->ioaddr;
-
-			if (ioaddr->cmd_addr == 0x1f0)
-				release_region(0x1f0, 8);
-			else if (ioaddr->cmd_addr == 0x170)
-				release_region(0x170, 8);
-		}
-
-		scsi_host_put(ap->host);
-	}
-
-	if (host_set->ops->host_stop)
-		host_set->ops->host_stop(host_set);
-
-	kfree(host_set);
 
+	ata_host_set_remove(host_set);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
 	dev_set_drvdata(dev, NULL);
@@ -4573,6 +4589,7 @@ module_exit(ata_exit);
 EXPORT_SYMBOL_GPL(ata_std_bios_param);
 EXPORT_SYMBOL_GPL(ata_std_ports);
 EXPORT_SYMBOL_GPL(ata_device_add);
+EXPORT_SYMBOL_GPL(ata_host_set_remove);
 EXPORT_SYMBOL_GPL(ata_sg_init);
 EXPORT_SYMBOL_GPL(ata_sg_init_one);
 EXPORT_SYMBOL_GPL(ata_qc_complete);

drivers/scsi/mesh.c

@@ -1959,16 +1959,29 @@ static int mesh_probe(struct macio_dev *mdev, const struct of_device_id *match)
 	/* Set it up */
        	mesh_init(ms);
 
-	/* XXX FIXME: error should be fatal */
+	/* Request interrupt */
-       	if (request_irq(ms->meshintr, do_mesh_interrupt, 0, "MESH", ms))
+       	if (request_irq(ms->meshintr, do_mesh_interrupt, 0, "MESH", ms)) {
 	       	printk(KERN_ERR "MESH: can't get irq %d\n", ms->meshintr);
+		goto out_shutdown;
+	}
 
-	/* XXX FIXME: handle failure */
+	/* Add scsi host & scan */
-	scsi_add_host(mesh_host, &mdev->ofdev.dev);
+	if (scsi_add_host(mesh_host, &mdev->ofdev.dev))
+		goto out_release_irq;
 	scsi_scan_host(mesh_host);
 
 	return 0;
 
+ out_release_irq:
+	free_irq(ms->meshintr, ms);
+ out_shutdown:
+	/* shutdown & reset bus in case of error or macos can be confused
+	 * at reboot if the bus was set to synchronous mode already
+	 */
+	mesh_shutdown(mdev);
+	set_mesh_power(ms, 0);
+	pci_free_consistent(macio_get_pci_dev(mdev), ms->dma_cmd_size,
+			    ms->dma_cmd_space, ms->dma_cmd_bus);
  out_unmap:
 	iounmap(ms->dma);
 	iounmap(ms->mesh);

drivers/scsi/sata_nv.c

@@ -158,6 +158,8 @@ static struct pci_device_id nv_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 },
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 },
 	{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
 		PCI_ANY_ID, PCI_ANY_ID,
 		PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },

drivers/serial/clps711x.c

@@ -98,7 +98,7 @@ static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *re
 {
 	struct uart_port *port = dev_id;
 	struct tty_struct *tty = port->info->tty;
-	unsigned int status, ch, flg, ignored = 0;
+	unsigned int status, ch, flg;
 
 	status = clps_readl(SYSFLG(port));
 	while (!(status & SYSFLG_URXFE)) {

drivers/usb/core/message.c

@@ -987,7 +987,7 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 
 			/* remove this interface if it has been registered */
 			interface = dev->actconfig->interface[i];
-			if (!klist_node_attached(&interface->dev.knode_bus))
+			if (!device_is_registered(&interface->dev))
 				continue;
 			dev_dbg (&dev->dev, "unregistering interface %s\n",
 				interface->dev.bus_id);

drivers/usb/core/usb.c

@@ -303,7 +303,7 @@ int usb_driver_claim_interface(struct usb_driver *driver,
 	/* if interface was already added, bind now; else let
 	 * the future device_add() bind it, bypassing probe()
 	 */
-	if (klist_node_attached(&dev->knode_bus))
+	if (device_is_registered(dev))
 		device_bind_driver(dev);
 
 	return 0;
@@ -336,8 +336,8 @@ void usb_driver_release_interface(struct usb_driver *driver,
 	if (iface->condition != USB_INTERFACE_BOUND)
 		return;
 
-	/* release only after device_add() */
+	/* don't release if the interface hasn't been added yet */
-	if (klist_node_attached(&dev->knode_bus)) {
+	if (device_is_registered(dev)) {
 		iface->condition = USB_INTERFACE_UNBINDING;
 		device_release_driver(dev);
 	}

drivers/usb/gadget/pxa2xx_udc.c

@@ -422,7 +422,7 @@ static inline void ep0_idle (struct pxa2xx_udc *dev)
 }
 
 static int
-write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max)
+write_packet(volatile unsigned long *uddr, struct pxa2xx_request *req, unsigned max)
 {
 	u8		*buf;
 	unsigned	length, count;
@@ -2602,7 +2602,7 @@ static int __exit pxa2xx_udc_remove(struct device *_dev)
  * VBUS IRQs should probably be ignored so that the PXA device just acts
  * "dead" to USB hosts until system resume.
  */
-static int pxa2xx_udc_suspend(struct device *dev, u32 state, u32 level)
+static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state, u32 level)
 {
 	struct pxa2xx_udc	*udc = dev_get_drvdata(dev);
 

drivers/usb/gadget/pxa2xx_udc.h

@@ -69,11 +69,11 @@ struct pxa2xx_ep {
 	 * UDDR = UDC Endpoint Data Register (the fifo)
 	 * DRCM = DMA Request Channel Map
 	 */
-	volatile u32				*reg_udccs;
+	volatile unsigned long			*reg_udccs;
-	volatile u32				*reg_ubcr;
+	volatile unsigned long			*reg_ubcr;
-	volatile u32				*reg_uddr;
+	volatile unsigned long			*reg_uddr;
 #ifdef USE_DMA
-	volatile u32				*reg_drcmr;
+	volatile unsigned long			*reg_drcmr;
 #define	drcmr(n)  .reg_drcmr = & DRCMR ## n ,
 #else
 #define	drcmr(n)  

drivers/usb/host/sl811-hcd.c

@@ -782,6 +782,9 @@ static irqreturn_t sl811h_irq(struct usb_hcd *hcd, struct pt_regs *regs)
 /* usb 1.1 says max 90% of a frame is available for periodic transfers.
  * this driver doesn't promise that much since it's got to handle an
  * IRQ per packet; irq handling latencies also use up that time.
+ *
+ * NOTE:  the periodic schedule is a sparse tree, with the load for
+ * each branch minimized.  see fig 3.5 in the OHCI spec for example.
  */
 #define	MAX_PERIODIC_LOAD	500	/* out of 1000 usec */
 
@@ -843,6 +846,7 @@ static int sl811h_urb_enqueue(
 	if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE))
 			|| !HC_IS_RUNNING(hcd->state)) {
 		retval = -ENODEV;
+		kfree(ep);
 		goto fail;
 	}
 
@@ -911,8 +915,16 @@ static int sl811h_urb_enqueue(
 	case PIPE_ISOCHRONOUS:
 	case PIPE_INTERRUPT:
 		urb->interval = ep->period;
-		if (ep->branch < PERIODIC_SIZE)
+		if (ep->branch < PERIODIC_SIZE) {
+			/* NOTE:  the phase is correct here, but the value
+			 * needs offsetting by the transfer queue depth.
+			 * All current drivers ignore start_frame, so this
+			 * is unlikely to ever matter...
+			 */
+			urb->start_frame = (sl811->frame & (PERIODIC_SIZE - 1))
+						+ ep->branch;
 			break;
+		}
 
 		retval = balance(sl811, ep->period, ep->load);
 		if (retval < 0)
@@ -1122,7 +1134,7 @@ sl811h_hub_descriptor (
 	desc->wHubCharacteristics = (__force __u16)cpu_to_le16(temp);
 
 	/* two bitmaps:  ports removable, and legacy PortPwrCtrlMask */
-	desc->bitmap[0] = 1 << 1;
+	desc->bitmap[0] = 0 << 1;
 	desc->bitmap[1] = ~0;
 }
 

drivers/usb/net/pegasus.c

@@ -647,6 +647,13 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs)
 		pkt_len -= 8;
 	}
 
+	/*
+	 * If the packet is unreasonably long, quietly drop it rather than
+	 * kernel panicing by calling skb_put.
+	 */
+	if (pkt_len > PEGASUS_MTU)
+		goto goon;
+
 	/*
 	 * at this point we are sure pegasus->rx_skb != NULL
 	 * so we go ahead and pass up the packet.
@@ -886,16 +893,18 @@ static inline void get_interrupt_interval(pegasus_t * pegasus)
 	__u8 data[2];
 
 	read_eprom_word(pegasus, 4, (__u16 *) data);
+	if (pegasus->usb->speed != USB_SPEED_HIGH) {
 		if (data[1] < 0x80) {
 			if (netif_msg_timer(pegasus))
-			dev_info(&pegasus->intf->dev,
+				dev_info(&pegasus->intf->dev, "intr interval "
-				"intr interval changed from %ums to %ums\n",
+					"changed from %ums to %ums\n",
 					data[1], 0x80);
 			data[1] = 0x80;
 #ifdef PEGASUS_WRITE_EEPROM
 			write_eprom_word(pegasus, 4, *(__u16 *) data);
 #endif
 		}
+	}
 	pegasus->intr_interval = data[1];
 }
 
@@ -904,8 +913,9 @@ static void set_carrier(struct net_device *net)
 	pegasus_t *pegasus = netdev_priv(net);
 	u16 tmp;
 
-	if (read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
+	if (!read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
 		return;
+
 	if (tmp & BMSR_LSTATUS)
 		netif_carrier_on(net);
 	else
@@ -1355,6 +1365,7 @@ static void pegasus_disconnect(struct usb_interface *intf)
 	cancel_delayed_work(&pegasus->carrier_check);
 	unregister_netdev(pegasus->net);
 	usb_put_dev(interface_to_usbdev(intf));
+	unlink_all_urbs(pegasus);
 	free_all_urbs(pegasus);
 	free_skb_pool(pegasus);
 	if (pegasus->rx_skb)

drivers/usb/serial/airprime.c

@@ -16,7 +16,8 @@
 #include "usb-serial.h"
 
 static struct usb_device_id id_table [] = {
-	{ USB_DEVICE(0xf3d, 0x0112) },
+	{ USB_DEVICE(0xf3d, 0x0112) },  /* AirPrime CDMA Wireless PC Card */
+	{ USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);

drivers/usb/serial/ftdi_sio.c

@@ -1846,11 +1846,13 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_
 	} else {
 		/* set the baudrate determined before */
 		if (change_speed(port)) {
-			err("%s urb failed to set baurdrate", __FUNCTION__);
+			err("%s urb failed to set baudrate", __FUNCTION__);
 		}
-		/* Ensure  RTS and DTR are raised */
+		/* Ensure RTS and DTR are raised when baudrate changed from 0 */
+		if ((old_termios->c_cflag & CBAUD) == B0) {
 			set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 		}
+	}
 
 	/* Set flow control */
 	/* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */

drivers/usb/serial/option.c

@@ -25,6 +25,9 @@
   2005-06-20  v0.4.1 add missing braces :-/
                      killed end-of-line whitespace
   2005-07-15  v0.4.2 rename WLAN product to FUSION, add FUSION2
+  2005-09-10  v0.4.3 added HUAWEI E600 card and Audiovox AirCard
+  2005-09-20  v0.4.4 increased recv buffer size: the card sometimes
+                     wants to send >2000 bytes.
 
   Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
 
@@ -71,15 +74,21 @@ static int  option_send_setup(struct usb_serial_port *port);
 
 /* Vendor and product IDs */
 #define OPTION_VENDOR_ID			0x0AF0
+#define HUAWEI_VENDOR_ID			0x12D1
+#define AUDIOVOX_VENDOR_ID			0x0F3D
 
 #define OPTION_PRODUCT_OLD		0x5000
 #define OPTION_PRODUCT_FUSION	0x6000
 #define OPTION_PRODUCT_FUSION2	0x6300
+#define HUAWEI_PRODUCT_E600     0x1001
+#define AUDIOVOX_PRODUCT_AIRCARD 0x0112
 
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
+	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
+	{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
 	{ } /* Terminating entry */
 };
 
@@ -132,7 +141,7 @@ static int debug;
 
 #define N_IN_URB 4
 #define N_OUT_URB 1
-#define IN_BUFLEN 1024
+#define IN_BUFLEN 4096
 #define OUT_BUFLEN 128
 
 struct option_port_private {

drivers/video/aty/xlinit.c

@@ -253,8 +253,10 @@ int atyfb_xl_init(struct fb_info *info)
 	aty_st_le32(0xFC, 0x00000000, par);
 
 #if defined (CONFIG_FB_ATY_GENERIC_LCD)
+	{
 		int i;
-	for (i=0; i<sizeof(lcd_tbl)/sizeof(lcd_tbl_t); i++) {
+
+		for (i = 0; i < ARRAY_SIZE(lcd_tbl); i++)
 			aty_st_lcd(lcd_tbl[i].lcd_reg, lcd_tbl[i].val, par);
 	}
 #endif

fs/9p/conv.c

@@ -3,6 +3,7 @@
  *
  * 9P protocol conversion functions
  *
+ *  Copyright (C) 2004, 2005 by Latchesar Ionkov <lucho@ionkov.net>
  *  Copyright (C) 2004 by Eric Van Hensbergen <ericvh@gmail.com>
  *  Copyright (C) 2002 by Ron Minnich <rminnich@lanl.gov>
  *
@@ -55,67 +56,71 @@ static inline int buf_check_overflow(struct cbuf *buf)
 	return buf->p > buf->ep;
 }
 
-static inline void buf_check_size(struct cbuf *buf, int len)
+static inline int buf_check_size(struct cbuf *buf, int len)
 {
 	if (buf->p+len > buf->ep) {
 		if (buf->p < buf->ep) {
 			eprintk(KERN_ERR, "buffer overflow\n");
 			buf->p = buf->ep + 1;
+			return 0;
 		}
 	}
+
+	return 1;
 }
 
 static inline void *buf_alloc(struct cbuf *buf, int len)
 {
 	void *ret = NULL;
 
-	buf_check_size(buf, len);
+	if (buf_check_size(buf, len)) {
 		ret = buf->p;
 		buf->p += len;
+	}
 
 	return ret;
 }
 
 static inline void buf_put_int8(struct cbuf *buf, u8 val)
 {
-	buf_check_size(buf, 1);
+	if (buf_check_size(buf, 1)) {
-
 		buf->p[0] = val;
 		buf->p++;
 	}
+}
 
 static inline void buf_put_int16(struct cbuf *buf, u16 val)
 {
-	buf_check_size(buf, 2);
+	if (buf_check_size(buf, 2)) {
-
 		*(__le16 *) buf->p = cpu_to_le16(val);
 		buf->p += 2;
 	}
+}
 
 static inline void buf_put_int32(struct cbuf *buf, u32 val)
 {
-	buf_check_size(buf, 4);
+	if (buf_check_size(buf, 4)) {
-
 		*(__le32 *)buf->p = cpu_to_le32(val);
 		buf->p += 4;
 	}
+}
 
 static inline void buf_put_int64(struct cbuf *buf, u64 val)
 {
-	buf_check_size(buf, 8);
+	if (buf_check_size(buf, 8)) {
-
 		*(__le64 *)buf->p = cpu_to_le64(val);
 		buf->p += 8;
 	}
+}
 
 static inline void buf_put_stringn(struct cbuf *buf, const char *s, u16 slen)
 {
-	buf_check_size(buf, slen + 2);
+	if (buf_check_size(buf, slen + 2)) {
-
 		buf_put_int16(buf, slen);
 		memcpy(buf->p, s, slen);
 		buf->p += slen;
 	}
+}
 
 static inline void buf_put_string(struct cbuf *buf, const char *s)
 {
@@ -124,20 +129,20 @@ static inline void buf_put_string(struct cbuf *buf, const char *s)
 
 static inline void buf_put_data(struct cbuf *buf, void *data, u32 datalen)
 {
-	buf_check_size(buf, datalen);
+	if (buf_check_size(buf, datalen)) {
-
 		memcpy(buf->p, data, datalen);
 		buf->p += datalen;
 	}
+}
 
 static inline u8 buf_get_int8(struct cbuf *buf)
 {
 	u8 ret = 0;
 
-	buf_check_size(buf, 1);
+	if (buf_check_size(buf, 1)) {
 		ret = buf->p[0];
-
 		buf->p++;
+	}
 
 	return ret;
 }
@@ -146,10 +151,10 @@ static inline u16 buf_get_int16(struct cbuf *buf)
 {
 	u16 ret = 0;
 
-	buf_check_size(buf, 2);
+	if (buf_check_size(buf, 2)) {
 		ret = le16_to_cpu(*(__le16 *)buf->p);
-
 		buf->p += 2;
+	}
 
 	return ret;
 }
@@ -158,10 +163,10 @@ static inline u32 buf_get_int32(struct cbuf *buf)
 {
 	u32 ret = 0;
 
-	buf_check_size(buf, 4);
+	if (buf_check_size(buf, 4)) {
 		ret = le32_to_cpu(*(__le32 *)buf->p);
-
 		buf->p += 4;
+	}
 
 	return ret;
 }
@@ -170,10 +175,10 @@ static inline u64 buf_get_int64(struct cbuf *buf)
 {
 	u64 ret = 0;
 
-	buf_check_size(buf, 8);
+	if (buf_check_size(buf, 8)) {
 		ret = le64_to_cpu(*(__le64 *)buf->p);
-
 		buf->p += 8;
+	}
 
 	return ret;
 }
@@ -181,27 +186,35 @@ static inline u64 buf_get_int64(struct cbuf *buf)
 static inline int
 buf_get_string(struct cbuf *buf, char *data, unsigned int datalen)
 {
+	u16 len = 0;
 
-	u16 len = buf_get_int16(buf);
+	len = buf_get_int16(buf);
-	buf_check_size(buf, len);
+	if (!buf_check_overflow(buf) && buf_check_size(buf, len) && len+1>datalen) {
-	if (len + 1 > datalen)
-		return 0;
-
 		memcpy(data, buf->p, len);
 		data[len] = 0;
 		buf->p += len;
+		len++;
+	}
 
-	return len + 1;
+	return len;
 }
 
 static inline char *buf_get_stringb(struct cbuf *buf, struct cbuf *sbuf)
 {
-	char *ret = NULL;
+	char *ret;
-	int n = buf_get_string(buf, sbuf->p, sbuf->ep - sbuf->p);
+	u16 len;
 
-	if (n > 0) {
+	ret = NULL;
+	len = buf_get_int16(buf);
+
+	if (!buf_check_overflow(buf) && buf_check_size(buf, len) &&
+		buf_check_size(sbuf, len+1)) {
+
+		memcpy(sbuf->p, buf->p, len);
+		sbuf->p[len] = 0;
 		ret = sbuf->p;
-		sbuf->p += n;
+		buf->p += len;
+		sbuf->p += len + 1;
 	}
 
 	return ret;
@@ -209,12 +222,15 @@ static inline char *buf_get_stringb(struct cbuf *buf, struct cbuf *sbuf)
 
 static inline int buf_get_data(struct cbuf *buf, void *data, int datalen)
 {
-	buf_check_size(buf, datalen);
+	int ret = 0;
 
+	if (buf_check_size(buf, datalen)) {
 		memcpy(data, buf->p, datalen);
 		buf->p += datalen;
+		ret = datalen;
+	}
 
-	return datalen;
+	return ret;
 }
 
 static inline void *buf_get_datab(struct cbuf *buf, struct cbuf *dbuf,
@@ -223,14 +239,13 @@ static inline void *buf_get_datab(struct cbuf *buf, struct cbuf *dbuf,
 	char *ret = NULL;
 	int n = 0;
 
-	buf_check_size(dbuf, datalen);
+	if (buf_check_size(dbuf, datalen)) {
-
 		n = buf_get_data(buf, dbuf->p, datalen);
-
 		if (n > 0) {
 			ret = dbuf->p;
 			dbuf->p += n;
 		}
+	}
 
 	return ret;
 }
@@ -636,7 +651,7 @@ v9fs_deserialize_fcall(struct v9fs_session_info *v9ses, u32 msgsize,
 		break;
 	case RWALK:
 		rcall->params.rwalk.nwqid = buf_get_int16(bufp);
-		rcall->params.rwalk.wqids = buf_alloc(bufp,
+		rcall->params.rwalk.wqids = buf_alloc(dbufp,
 		      rcall->params.rwalk.nwqid * sizeof(struct v9fs_qid));
 		if (rcall->params.rwalk.wqids)
 			for (i = 0; i < rcall->params.rwalk.nwqid; i++) {

fs/9p/v9fs.c

@@ -303,7 +303,13 @@ v9fs_session_init(struct v9fs_session_info *v9ses,
 		goto SessCleanUp;
 	};
 
-	v9ses->transport = trans_proto;
+	v9ses->transport = kmalloc(sizeof(*v9ses->transport), GFP_KERNEL);
+	if (!v9ses->transport) {
+		retval = -ENOMEM;
+		goto SessCleanUp;
+	}
+
+	memmove(v9ses->transport, trans_proto, sizeof(*v9ses->transport));
 
 	if ((retval = v9ses->transport->init(v9ses, dev_name, data)) < 0) {
 		eprintk(KERN_ERR, "problem initializing transport\n");

fs/9p/vfs_inode.c

@@ -1063,8 +1063,8 @@ static int v9fs_vfs_readlink(struct dentry *dentry, char __user * buffer,
 	int ret;
 	char *link = __getname();
 
-	if (strlen(link) < buflen)
+	if (buflen > PATH_MAX)
-		buflen = strlen(link);
+		buflen = PATH_MAX;
 
 	dprintk(DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
 

fs/9p/vfs_super.c

@@ -129,8 +129,8 @@ static struct super_block *v9fs_get_sb(struct file_system_type
 
 	if ((newfid = v9fs_session_init(v9ses, dev_name, data)) < 0) {
 		dprintk(DEBUG_ERROR, "problem initiating session\n");
-		retval = newfid;
+		kfree(v9ses);
-		goto free_session;
+		return ERR_PTR(newfid);
 	}
 
 	sb = sget(fs_type, NULL, v9fs_set_super, v9ses);
@@ -150,7 +150,7 @@ static struct super_block *v9fs_get_sb(struct file_system_type
 
 	if (!root) {
 		retval = -ENOMEM;
-		goto release_inode;
+		goto put_back_sb;
 	}
 
 	sb->s_root = root;
@@ -159,7 +159,7 @@ static struct super_block *v9fs_get_sb(struct file_system_type
 	root_fid = v9fs_fid_create(root);
 	if (root_fid == NULL) {
 		retval = -ENOMEM;
-		goto release_dentry;
+		goto put_back_sb;
 	}
 
 	root_fid->fidopen = 0;
@@ -182,25 +182,15 @@ static struct super_block *v9fs_get_sb(struct file_system_type
 
 	if (stat_result < 0) {
 		retval = stat_result;
-		goto release_dentry;
+		goto put_back_sb;
 	}
 
 	return sb;
 
-      release_dentry:
-	dput(sb->s_root);
-
-      release_inode:
-	iput(inode);
-
 put_back_sb:
+	/* deactivate_super calls v9fs_kill_super which will frees the rest */
 	up_write(&sb->s_umount);
 	deactivate_super(sb);
-	v9fs_session_close(v9ses);
-
-      free_session:
-	kfree(v9ses);
-
 	return ERR_PTR(retval);
 }
 

fs/cifs/cifsfs.c

@@ -781,6 +781,8 @@ static int cifs_oplock_thread(void * dummyarg)
 
 	oplockThread = current;
 	do {
+		if (try_to_freeze()) 
+			continue;
 		set_current_state(TASK_INTERRUPTIBLE);
 		
 		schedule_timeout(1*HZ);  

fs/cifs/connect.c

@@ -344,6 +344,8 @@ cifs_demultiplex_thread(struct TCP_Server_Info *server)
 	}
 
 	while (server->tcpStatus != CifsExiting) {
+		if (try_to_freeze())
+			continue;
 		if (bigbuf == NULL) {
 			bigbuf = cifs_buf_get();
 			if(bigbuf == NULL) {

fs/ext3/balloc.c

@@ -1410,7 +1410,7 @@ unsigned long ext3_count_free_blocks(struct super_block *sb)
 	unsigned long desc_count;
 	struct ext3_group_desc *gdp;
 	int i;
-	unsigned long ngroups;
+	unsigned long ngroups = EXT3_SB(sb)->s_groups_count;
 #ifdef EXT3FS_DEBUG
 	struct ext3_super_block *es;
 	unsigned long bitmap_count, x;
@@ -1421,7 +1421,8 @@ unsigned long ext3_count_free_blocks(struct super_block *sb)
 	desc_count = 0;
 	bitmap_count = 0;
 	gdp = NULL;
-	for (i = 0; i < EXT3_SB(sb)->s_groups_count; i++) {
+
+	for (i = 0; i < ngroups; i++) {
 		gdp = ext3_get_group_desc(sb, i, NULL);
 		if (!gdp)
 			continue;
@@ -1443,7 +1444,6 @@ unsigned long ext3_count_free_blocks(struct super_block *sb)
 	return bitmap_count;
 #else
 	desc_count = 0;
-	ngroups = EXT3_SB(sb)->s_groups_count;
 	smp_rmb();
 	for (i = 0; i < ngroups; i++) {
 		gdp = ext3_get_group_desc(sb, i, NULL);

fs/ext3/resize.c

@@ -242,7 +242,7 @@ static int setup_new_group_blocks(struct super_block *sb,
 	     i < sbi->s_itb_per_group; i++, bit++, block++) {
 		struct buffer_head *it;
 
-		ext3_debug("clear inode block %#04x (+%ld)\n", block, bit);
+		ext3_debug("clear inode block %#04lx (+%d)\n", block, bit);
 		if (IS_ERR(it = bclean(handle, sb, block))) {
 			err = PTR_ERR(it);
 			goto exit_bh;
@@ -643,8 +643,8 @@ static void update_backups(struct super_block *sb,
 			break;
 
 		bh = sb_getblk(sb, group * bpg + blk_off);
-		ext3_debug(sb, __FUNCTION__, "update metadata backup %#04lx\n",
+		ext3_debug("update metadata backup %#04lx\n",
-			   bh->b_blocknr);
+			  (unsigned long)bh->b_blocknr);
 		if ((err = ext3_journal_get_write_access(handle, bh)))
 			break;
 		lock_buffer(bh);

fs/ext3/super.c

@@ -512,15 +512,14 @@ static void ext3_clear_inode(struct inode *inode)
 
 static int ext3_show_options(struct seq_file *seq, struct vfsmount *vfs)
 {
-	struct ext3_sb_info *sbi = EXT3_SB(vfs->mnt_sb);
+	struct super_block *sb = vfs->mnt_sb;
+	struct ext3_sb_info *sbi = EXT3_SB(sb);
 
-	if (sbi->s_mount_opt & EXT3_MOUNT_JOURNAL_DATA)
+	if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA)
 		seq_puts(seq, ",data=journal");
-
+	else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA)
-	if (sbi->s_mount_opt & EXT3_MOUNT_ORDERED_DATA)
 		seq_puts(seq, ",data=ordered");
-
+	else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)
-	if (sbi->s_mount_opt & EXT3_MOUNT_WRITEBACK_DATA)
 		seq_puts(seq, ",data=writeback");
 
 #if defined(CONFIG_QUOTA)

fs/jfs/inode.c

@@ -129,8 +129,7 @@ void jfs_delete_inode(struct inode *inode)
 	jfs_info("In jfs_delete_inode, inode = 0x%p", inode);
 
 	if (!is_bad_inode(inode) &&
-	    (JFS_IP(inode)->fileset == cpu_to_le32(FILESYSTEM_I))) {
+	    (JFS_IP(inode)->fileset == FILESYSTEM_I)) {
-
 		truncate_inode_pages(&inode->i_data, 0);
 
 		if (test_cflag(COMMIT_Freewmap, inode))

fs/jfs/jfs_dmap.c

@@ -3055,7 +3055,7 @@ static int cntlz(u32 value)
  * RETURN VALUES:
  *      log2 number of blocks
  */
-int blkstol2(s64 nb)
+static int blkstol2(s64 nb)
 {
 	int l2nb;
 	s64 mask;		/* meant to be signed */

fs/jfs/jfs_txnmgr.c

@@ -725,6 +725,9 @@ struct tlock *txLock(tid_t tid, struct inode *ip, struct metapage * mp,
 	else
 		tlck->flag = tlckINODELOCK;
 
+	if (S_ISDIR(ip->i_mode))
+		tlck->flag |= tlckDIRECTORY;
+
 	tlck->type = 0;
 
 	/* bind the tlock and the page */
@@ -1009,6 +1012,8 @@ struct tlock *txMaplock(tid_t tid, struct inode *ip, int type)
 
 	/* bind the tlock and the object */
 	tlck->flag = tlckINODELOCK;
+	if (S_ISDIR(ip->i_mode))
+		tlck->flag |= tlckDIRECTORY;
 	tlck->ip = ip;
 	tlck->mp = NULL;
 
@@ -1077,6 +1082,8 @@ struct linelock *txLinelock(struct linelock * tlock)
 	linelock->flag = tlckLINELOCK;
 	linelock->maxcnt = TLOCKLONG;
 	linelock->index = 0;
+	if (tlck->flag & tlckDIRECTORY)
+		linelock->flag |= tlckDIRECTORY;
 
 	/* append linelock after tlock */
 	linelock->next = tlock->next;
@@ -2070,7 +2077,7 @@ static void xtLog(struct jfs_log * log, struct tblock * tblk, struct lrd * lrd,
  *
  * function:    log from maplock of freed data extents;
  */
-void mapLog(struct jfs_log * log, struct tblock * tblk, struct lrd * lrd,
+static void mapLog(struct jfs_log * log, struct tblock * tblk, struct lrd * lrd,
 		   struct tlock * tlck)
 {
 	struct pxd_lock *pxdlock;
@@ -2209,7 +2216,7 @@ void txEA(tid_t tid, struct inode *ip, dxd_t * oldea, dxd_t * newea)
  * function: synchronously write pages locked by transaction
  *              after txLog() but before txUpdateMap();
  */
-void txForce(struct tblock * tblk)
+static void txForce(struct tblock * tblk)
 {
 	struct tlock *tlck;
 	lid_t lid, next;
@@ -2358,7 +2365,7 @@ static void txUpdateMap(struct tblock * tblk)
 			 */
 			else {	/* (maplock->flag & mlckFREE) */
 
-				if (S_ISDIR(tlck->ip->i_mode))
+				if (tlck->flag & tlckDIRECTORY)
 					txFreeMap(ipimap, maplock,
 						  tblk, COMMIT_PWMAP);
 				else

fs/jfs/jfs_txnmgr.h

@@ -122,6 +122,7 @@ extern struct tlock *TxLock;	/* transaction lock table */
 #define tlckLOG			0x0800
 /* updateMap state */
 #define	tlckUPDATEMAP		0x0080
+#define	tlckDIRECTORY		0x0040
 /* freeLock state */
 #define tlckFREELOCK		0x0008
 #define tlckWRITEPAGE		0x0004

fs/nfs/read.c

@@ -184,14 +184,13 @@ static void nfs_readpage_release(struct nfs_page *req)
 {
 	unlock_page(req->wb_page);
 
-	nfs_clear_request(req);
-	nfs_release_request(req);
-
 	dprintk("NFS: read done (%s/%Ld %d@%Ld)\n",
 			req->wb_context->dentry->d_inode->i_sb->s_id,
 			(long long)NFS_FILEID(req->wb_context->dentry->d_inode),
 			req->wb_bytes,
 			(long long)req_offset(req));
+	nfs_clear_request(req);
+	nfs_release_request(req);
 }
 
 /*