From eb002726fac7cefb98ff39ddb89e150a1c24fe85 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Thu, 12 Mar 2020 16:45:14 +0200 Subject: [PATCH] xhci: Ensure link state is U3 after setting USB_SS_PORT_LS_U3 The xHCI spec doesn't specify the upper bound of U3 transition time. For some devices 20ms is not enough, so we need to make sure the link state is in U3 before further actions. I've tried to use U3 Entry Capability by setting U3 Entry Enable in config register, however the port change event for U3 transition interrupts the system suspend process. For now let's use the less ideal method by polling PLS. [use usleep_range(), and shorten the delay time while polling -Mathias] Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200312144517.1593-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 24835718b9c6..dde46d1d5f6f 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1324,7 +1324,16 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_set_link_state(xhci, ports[wIndex], link_state); spin_unlock_irqrestore(&xhci->lock, flags); - msleep(20); /* wait device to enter */ + if (link_state == USB_SS_PORT_LS_U3) { + int retries = 16; + + while (retries--) { + usleep_range(4000, 8000); + temp = readl(ports[wIndex]->addr); + if ((temp & PORT_PLS_MASK) == XDEV_U3) + break; + } + } spin_lock_irqsave(&xhci->lock, flags); temp = readl(ports[wIndex]->addr);