openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

isci: renaming sas_capabilities to scic_phy_cap 

This seems to be a data structure that represents the phy capabilities
register from the hardware and has nothing to do with SAS data structs.
Moving and fixup

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This commit is contained in:
Dave Jiang 2011-05-04 16:16:44 -07:00 committed by Dan Williams
parent 1dea554fce
commit ed0e24830e
3 changed files with 50 additions and 55 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
drivers/scsi/isci/core/intel_sas.h
View File

@ -111,42 +111,6 @@ struct sci_sas_identify_address_frame_protocols {
};
/**
* struct sas_capabilities - This structure depicts the various SAS
* capabilities supported by the directly attached target device. For
* specific information on each of these individual fields please reference
* the SAS specification Phy layer section on speed negotiation windows.
*
*
*/
struct sas_capabilities {
union {
struct {
/**
* The SAS specification indicates the start bit shall always be set to
* 1. This implementation will have the start bit set to 0 if the
* PHY CAPABILITIES were either not received or speed negotiation failed.
*/
u32 start:1;
u32 tx_ssc_type:1;
u32 reserved1:2;
u32 requested_logical_link_rate:4;
u32 gen1_without_ssc_supported:1;
u32 gen1_with_ssc_supported:1;
u32 gen2_without_ssc_supported:1;
u32 gen2_with_ssc_supported:1;
u32 gen3_without_ssc_supported:1;
u32 gen3_with_ssc_supported:1;
u32 reserved2:17;
u32 parity:1;
} bits;
u32 all;
} u;
};
/**
* enum _SCI_SAS_TASK_ATTRIBUTE - This enumeration depicts the SAM/SAS
* specification defined task attribute values for a command information

30
drivers/scsi/isci/core/scic_phy.h
View File

@ -75,6 +75,34 @@ struct scic_sds_port;
enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy);
struct scic_phy_cap {
union {
struct {
/*
* The SAS specification indicates the start bit shall
* always be set to
* 1. This implementation will have the start bit set
* to 0 if the PHY CAPABILITIES were either not
* received or speed negotiation failed.
*/
u8 start:1;
u8 tx_ssc_type:1;
u8 res1:2;
u8 req_logical_linkrate:4;
u32 gen1_no_ssc:1;
u32 gen1_ssc:1;
u32 gen2_no_ssc:1;
u32 gen2_ssc:1;
u32 gen3_no_ssc:1;
u32 gen3_ssc:1;
u32 res2:17;
u32 parity:1;
};
u32 all;
};
} __packed;
/**
* struct scic_phy_properties - This structure defines the properties common to
* all phys that can be retrieved.
@ -125,7 +153,7 @@ struct scic_sas_phy_properties {
* This field delineates the Phy capabilities structure received
* from the remote end point.
*/
struct sas_capabilities received_capabilities;
struct scic_phy_cap rcvd_cap;
};

39
drivers/scsi/isci/core/scic_sds_phy.c
View File

@ -122,12 +122,15 @@ static enum sci_status
scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy,
struct scu_link_layer_registers __iomem *link_layer_registers)
{
struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller;
struct scic_sds_controller *scic =
sci_phy->owning_port->owning_controller;
int phy_idx = sci_phy->phy_index;
struct sci_phy_user_params *phy_user = &scic->user_parameters.sds1.phys[phy_idx];
struct sci_phy_oem_params *phy_oem = &scic->oem_parameters.sds1.phys[phy_idx];
struct sci_phy_user_params *phy_user =
&scic->user_parameters.sds1.phys[phy_idx];
struct sci_phy_oem_params *phy_oem =
&scic->oem_parameters.sds1.phys[phy_idx];
u32 phy_configuration;
struct sas_capabilities phy_capabilities;
struct scic_phy_cap phy_cap;
u32 parity_check = 0;
u32 parity_count = 0;
u32 llctl, link_rate;
@ -146,7 +149,8 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy,
&sci_phy->link_layer_registers->transmit_identification);
/* Write the device SAS Address */
writel(0xFEDCBA98, &sci_phy->link_layer_registers->sas_device_name_high);
writel(0xFEDCBA98,
&sci_phy->link_layer_registers->sas_device_name_high);
writel(phy_idx, &sci_phy->link_layer_registers->sas_device_name_low);
/* Write the source SAS Address */
@ -170,21 +174,21 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy,
&sci_phy->link_layer_registers->phy_configuration);
/* Configure the SNW capabilities */
phy_capabilities.u.all = 0;
phy_capabilities.u.bits.start = 1;
phy_capabilities.u.bits.gen3_without_ssc_supported = 1;
phy_capabilities.u.bits.gen2_without_ssc_supported = 1;
phy_capabilities.u.bits.gen1_without_ssc_supported = 1;
phy_cap.all = 0;
phy_cap.start = 1;
phy_cap.gen3_no_ssc = 1;
phy_cap.gen2_no_ssc = 1;
phy_cap.gen1_no_ssc = 1;
if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) {
phy_capabilities.u.bits.gen3_with_ssc_supported = 1;
phy_capabilities.u.bits.gen2_with_ssc_supported = 1;
phy_capabilities.u.bits.gen1_with_ssc_supported = 1;
phy_cap.gen3_ssc = 1;
phy_cap.gen2_ssc = 1;
phy_cap.gen1_ssc = 1;
}
/*
* The SAS specification indicates that the phy_capabilities that
* are transmitted shall have an even parity. Calculate the parity. */
parity_check = phy_capabilities.u.all;
parity_check = phy_cap.all;
while (parity_check != 0) {
if (parity_check & 0x1)
parity_count++;
@ -195,10 +199,9 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy,
* If parity indicates there are an odd number of bits set, then
* set the parity bit to 1 in the phy capabilities. */
if ((parity_count % 2) != 0)
phy_capabilities.u.bits.parity = 1;
phy_cap.parity = 1;
writel(phy_capabilities.u.all,
&sci_phy->link_layer_registers->phy_capabilities);
writel(phy_cap.all, &sci_phy->link_layer_registers->phy_capabilities);
/* Set the enable spinup period but disable the ability to send
* notify enable spinup
@ -561,7 +564,7 @@ enum sci_status scic_sas_phy_get_properties(
&sci_phy->phy_type.sas_id_frame,
sizeof(struct sas_identify_frame));
properties->received_capabilities.u.all =
properties->rcvd_cap.all =
readl(&sci_phy->link_layer_registers->receive_phycap);
return SCI_SUCCESS;