openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

[PATCH] m68knommu: extract common timer code for 68328 processor 

Rework the 68x328 configuration and setup code. All 68x328 varient
share the same timer hardware, so extract that into its own file,
instead of keeping copies in each processors setup code.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Greg Ungerer 2005-09-09 09:32:14 +10:00 committed by Linus Torvalds
parent 8c2b58ce71
commit ee721126ca
1 changed files with 21 additions and 73 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

94
arch/m68knommu/platform/68328/config.c
View File

@ -1,5 +1,7 @@
/***************************************************************************/
/*
* linux/arch/$(ARCH)/platform/$(PLATFORM)/config.c
* linux/arch/m68knommu/platform/68328/config.c
*
* Copyright (C) 1993 Hamish Macdonald
* Copyright (C) 1999 D. Jeff Dionne
@ -11,6 +13,8 @@
* VZ Support/Fixes Evan Stawnyczy <e@lineo.ca>
*/
/***************************************************************************/
#include <asm/dbg.h>
#include <stdarg.h>
#include <linux/config.h>
@ -29,76 +33,16 @@
#include <asm/machdep.h>
#include <asm/MC68328.h>
/***************************************************************************/
void BSP_sched_init(irqreturn_t (*timer_routine)(int, void *, struct pt_regs *))
{
void m68328_timer_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *));
void m68328_timer_tick(void);
unsigned long m68328_timer_gettimeoffset(void);
void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec);
#ifdef CONFIG_XCOPILOT_BUGS
/*
* The only thing I know is that CLK32 is not available on Xcopilot
* I have little idea about what frequency SYSCLK has on Xcopilot.
* The values for prescaler and compare registers were simply
* taken from the original source
*/
/***************************************************************************/
/* Restart mode, Enable int, SYSCLK, Enable timer */
TCTL2 = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_SYSCLK | TCTL_TEN;
/* Set prescaler */
TPRER2 = 2;
/* Set compare register */
TCMP2 = 0xd7e4;
#else
/* Restart mode, Enable int, 32KHz, Enable timer */
TCTL2 = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN;
/* Set prescaler (Divide 32KHz by 32)*/
TPRER2 = 31;
/* Set compare register 32Khz / 32 / 10 = 100 */
TCMP2 = 10;
#endif
request_irq(TMR2_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL);
}
void BSP_tick(void)
{
/* Reset Timer2 */
TSTAT2 &= 0;
}
unsigned long BSP_gettimeoffset (void)
{
return 0;
}
void BSP_gettod (int *yearp, int *monp, int *dayp,
int *hourp, int *minp, int *secp)
{
}
int BSP_hwclk(int op, struct hwclk_time *t)
{
if (!op) {
/* read */
} else {
/* write */
}
return 0;
}
int BSP_set_clock_mmss (unsigned long nowtime)
{
#if 0
short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
tod->second1 = real_seconds / 10;
tod->second2 = real_seconds % 10;
tod->minute1 = real_minutes / 10;
tod->minute2 = real_minutes % 10;
#endif
return 0;
}
void BSP_reset (void)
void m68328_reset (void)
{
local_irq_disable();
asm volatile ("moveal #0x10c00000, %a0;\n\t"
@ -108,18 +52,22 @@ void BSP_reset (void)
"jmp (%a0);");
}
/***************************************************************************/
void config_BSP(char *command, int len)
{
printk(KERN_INFO "\n68328 support D. Jeff Dionne <jeff@uclinux.org>\n");
printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@kjshds.com>\n");
printk(KERN_INFO "68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n");
mach_sched_init = BSP_sched_init;
mach_tick = BSP_tick;
mach_gettimeoffset = BSP_gettimeoffset;
mach_gettod = BSP_gettod;
mach_sched_init = m68328_timer_init;
mach_tick = m68328_timer_tick;
mach_gettimeoffset = m68328_timer_gettimeoffset;
mach_gettod = m68328_timer_gettod;
mach_hwclk = NULL;
mach_set_clock_mmss = NULL;
mach_reset = BSP_reset;
mach_reset = m68328_reset;
*command = '\0';
}
/***************************************************************************/