mirror of https://gitee.com/openkylin/linux.git
Input: add support for DA9052/53 touch screen controller
This driver adds support for DA9052/53 4-wire resistive ADC interfaced touchscreen controller. DA9052/53 is a multi-function device, therefore this driver depends on DA9052/53 core. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This commit is contained in:
Ashish Jangam
Dmitry Torokhov
parent
df052676e5
commit
eead75a2b4
|
|
@ -187,6 +187,23 @@ config TOUCHSCREEN_DA9034
|
|||
Say Y here to enable the support for the touchscreen found
|
||||
on Dialog Semiconductor DA9034 PMIC.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called da9034-ts.
|
||||
|
||||
config TOUCHSCREEN_DA9052
|
||||
tristate "Dialog DA9052/DA9053 TSI"
|
||||
depends on PMIC_DA9052
|
||||
help
|
||||
Say Y here to support the touchscreen found on Dialog Semiconductor
|
||||
DA9052-BC and DA9053-AA/Bx PMICs.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called da9052_tsi.
|
||||
|
||||
config TOUCHSCREEN_DYNAPRO
|
||||
tristate "Dynapro serial touchscreen"
|
||||
select SERIO
|
||||
|
|
|
|||
|
|
@ -22,6 +22,7 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o
|
|||
obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI) += cyttsp_spi.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,370 @@
|
|||
/*
|
||||
* TSI driver for Dialog DA9052
|
||||
*
|
||||
* Copyright(c) 2012 Dialog Semiconductor Ltd.
|
||||
*
|
||||
* Author: David Dajun Chen <dchen@diasemi.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/interrupt.h>
|
||||
|
||||
#include <linux/mfd/da9052/reg.h>
|
||||
#include <linux/mfd/da9052/da9052.h>
|
||||
|
||||
#define TSI_PEN_DOWN_STATUS 0x40
|
||||
|
||||
struct da9052_tsi {
|
||||
struct da9052 *da9052;
|
||||
struct input_dev *dev;
|
||||
struct delayed_work ts_pen_work;
|
||||
struct mutex mutex;
|
||||
unsigned int irq_pendwn;
|
||||
unsigned int irq_datardy;
|
||||
bool stopped;
|
||||
bool adc_on;
|
||||
};
|
||||
|
||||
static void da9052_ts_adc_toggle(struct da9052_tsi *tsi, bool on)
|
||||
{
|
||||
da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 0, on);
|
||||
tsi->adc_on = on;
|
||||
}
|
||||
|
||||
static irqreturn_t da9052_ts_pendwn_irq(int irq, void *data)
|
||||
{
|
||||
struct da9052_tsi *tsi = data;
|
||||
|
||||
if (!tsi->stopped) {
|
||||
/* Mask PEN_DOWN event and unmask TSI_READY event */
|
||||
disable_irq_nosync(tsi->irq_pendwn);
|
||||
enable_irq(tsi->irq_datardy);
|
||||
|
||||
da9052_ts_adc_toggle(tsi, true);
|
||||
|
||||
schedule_delayed_work(&tsi->ts_pen_work, HZ / 50);
|
||||
}
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void da9052_ts_read(struct da9052_tsi *tsi)
|
||||
{
|
||||
struct input_dev *input = tsi->dev;
|
||||
int ret;
|
||||
u16 x, y, z;
|
||||
u8 v;
|
||||
|
||||
ret = da9052_reg_read(tsi->da9052, DA9052_TSI_X_MSB_REG);
|
||||
if (ret < 0)
|
||||
return;
|
||||
|
||||
x = (u16) ret;
|
||||
|
||||
ret = da9052_reg_read(tsi->da9052, DA9052_TSI_Y_MSB_REG);
|
||||
if (ret < 0)
|
||||
return;
|
||||
|
||||
y = (u16) ret;
|
||||
|
||||
ret = da9052_reg_read(tsi->da9052, DA9052_TSI_Z_MSB_REG);
|
||||
if (ret < 0)
|
||||
return;
|
||||
|
||||
z = (u16) ret;
|
||||
|
||||
ret = da9052_reg_read(tsi->da9052, DA9052_TSI_LSB_REG);
|
||||
if (ret < 0)
|
||||
return;
|
||||
|
||||
v = (u8) ret;
|
||||
|
||||
x = ((x << 2) & 0x3fc) | (v & 0x3);
|
||||
y = ((y << 2) & 0x3fc) | ((v & 0xc) >> 2);
|
||||
z = ((z << 2) & 0x3fc) | ((v & 0x30) >> 4);
|
||||
|
||||
input_report_key(input, BTN_TOUCH, 1);
|
||||
input_report_abs(input, ABS_X, x);
|
||||
input_report_abs(input, ABS_Y, y);
|
||||
input_report_abs(input, ABS_PRESSURE, z);
|
||||
input_sync(input);
|
||||
}
|
||||
|
||||
static irqreturn_t da9052_ts_datardy_irq(int irq, void *data)
|
||||
{
|
||||
struct da9052_tsi *tsi = data;
|
||||
|
||||
da9052_ts_read(tsi);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void da9052_ts_pen_work(struct work_struct *work)
|
||||
{
|
||||
struct da9052_tsi *tsi = container_of(work, struct da9052_tsi,
|
||||
ts_pen_work.work);
|
||||
if (!tsi->stopped) {
|
||||
int ret = da9052_reg_read(tsi->da9052, DA9052_TSI_LSB_REG);
|
||||
if (ret < 0 || (ret & TSI_PEN_DOWN_STATUS)) {
|
||||
/* Pen is still DOWN (or read error) */
|
||||
schedule_delayed_work(&tsi->ts_pen_work, HZ / 50);
|
||||
} else {
|
||||
struct input_dev *input = tsi->dev;
|
||||
|
||||
/* Pen UP */
|
||||
da9052_ts_adc_toggle(tsi, false);
|
||||
|
||||
/* Report Pen UP */
|
||||
input_report_key(input, BTN_TOUCH, 0);
|
||||
input_report_abs(input, ABS_PRESSURE, 0);
|
||||
input_sync(input);
|
||||
|
||||
/*
|
||||
* FIXME: Fixes the unhandled irq issue when quick
|
||||
* pen down and pen up events occurs
|
||||
*/
|
||||
ret = da9052_reg_update(tsi->da9052,
|
||||
DA9052_EVENT_B_REG, 0xC0, 0xC0);
|
||||
if (ret < 0)
|
||||
return;
|
||||
|
||||
/* Mask TSI_READY event and unmask PEN_DOWN event */
|
||||
disable_irq(tsi->irq_datardy);
|
||||
enable_irq(tsi->irq_pendwn);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
static int __devinit da9052_ts_configure_gpio(struct da9052 *da9052)
|
||||
{
|
||||
int error;
|
||||
|
||||
error = da9052_reg_update(da9052, DA9052_GPIO_2_3_REG, 0x30, 0);
|
||||
if (error < 0)
|
||||
return error;
|
||||
|
||||
error = da9052_reg_update(da9052, DA9052_GPIO_4_5_REG, 0x33, 0);
|
||||
if (error < 0)
|
||||
return error;
|
||||
|
||||
error = da9052_reg_update(da9052, DA9052_GPIO_6_7_REG, 0x33, 0);
|
||||
if (error < 0)
|
||||
return error;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __devinit da9052_configure_tsi(struct da9052_tsi *tsi)
|
||||
{
|
||||
int error;
|
||||
|
||||
error = da9052_ts_configure_gpio(tsi->da9052);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
/* Measure TSI sample every 1ms */
|
||||
error = da9052_reg_update(tsi->da9052, DA9052_ADC_CONT_REG,
|
||||
1 << 6, 1 << 6);
|
||||
if (error < 0)
|
||||
return error;
|
||||
|
||||
/* TSI_DELAY: 3 slots, TSI_SKIP: 0 slots, TSI_MODE: XYZP */
|
||||
error = da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 0xFC, 0xC0);
|
||||
if (error < 0)
|
||||
return error;
|
||||
|
||||
/* Supply TSIRef through LD09 */
|
||||
error = da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x59);
|
||||
if (error < 0)
|
||||
return error;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int da9052_ts_input_open(struct input_dev *input_dev)
|
||||
{
|
||||
struct da9052_tsi *tsi = input_get_drvdata(input_dev);
|
||||
|
||||
tsi->stopped = false;
|
||||
mb();
|
||||
|
||||
/* Unmask PEN_DOWN event */
|
||||
enable_irq(tsi->irq_pendwn);
|
||||
|
||||
/* Enable Pen Detect Circuit */
|
||||
return da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG,
|
||||
1 << 1, 1 << 1);
|
||||
}
|
||||
|
||||
static void da9052_ts_input_close(struct input_dev *input_dev)
|
||||
{
|
||||
struct da9052_tsi *tsi = input_get_drvdata(input_dev);
|
||||
|
||||
tsi->stopped = true;
|
||||
mb();
|
||||
disable_irq(tsi->irq_pendwn);
|
||||
cancel_delayed_work_sync(&tsi->ts_pen_work);
|
||||
|
||||
if (tsi->adc_on) {
|
||||
disable_irq(tsi->irq_datardy);
|
||||
da9052_ts_adc_toggle(tsi, false);
|
||||
|
||||
/*
|
||||
* If ADC was on that means that pendwn IRQ was disabled
|
||||
* twice and we need to enable it to keep enable/disable
|
||||
* counter balanced. IRQ is still off though.
|
||||
*/
|
||||
enable_irq(tsi->irq_pendwn);
|
||||
}
|
||||
|
||||
/* Disable Pen Detect Circuit */
|
||||
da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 1, 0);
|
||||
}
|
||||
|
||||
static int __devinit da9052_ts_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct da9052 *da9052;
|
||||
struct da9052_tsi *tsi;
|
||||
struct input_dev *input_dev;
|
||||
int irq_pendwn;
|
||||
int irq_datardy;
|
||||
int error;
|
||||
|
||||
da9052 = dev_get_drvdata(pdev->dev.parent);
|
||||
if (!da9052)
|
||||
return -EINVAL;
|
||||
|
||||
irq_pendwn = platform_get_irq_byname(pdev, "PENDWN");
|
||||
irq_datardy = platform_get_irq_byname(pdev, "TSIRDY");
|
||||
if (irq_pendwn < 0 || irq_datardy < 0) {
|
||||
dev_err(da9052->dev, "Unable to determine device interrupts\n");
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
tsi = kzalloc(sizeof(struct da9052_tsi), GFP_KERNEL);
|
||||
input_dev = input_allocate_device();
|
||||
if (!tsi || !input_dev) {
|
||||
error = -ENOMEM;
|
||||
goto err_free_mem;
|
||||
}
|
||||
|
||||
tsi->da9052 = da9052;
|
||||
tsi->dev = input_dev;
|
||||
tsi->irq_pendwn = da9052->irq_base + irq_pendwn;
|
||||
tsi->irq_datardy = da9052->irq_base + irq_datardy;
|
||||
tsi->stopped = true;
|
||||
INIT_DELAYED_WORK(&tsi->ts_pen_work, da9052_ts_pen_work);
|
||||
|
||||
input_dev->id.version = 0x0101;
|
||||
input_dev->id.vendor = 0x15B6;
|
||||
input_dev->id.product = 0x9052;
|
||||
input_dev->name = "Dialog DA9052 TouchScreen Driver";
|
||||
input_dev->dev.parent = &pdev->dev;
|
||||
input_dev->open = da9052_ts_input_open;
|
||||
input_dev->close = da9052_ts_input_close;
|
||||
|
||||
__set_bit(EV_ABS, input_dev->evbit);
|
||||
__set_bit(EV_KEY, input_dev->evbit);
|
||||
__set_bit(BTN_TOUCH, input_dev->keybit);
|
||||
|
||||
input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0);
|
||||
input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0);
|
||||
input_set_abs_params(input_dev, ABS_PRESSURE, 0, 1023, 0, 0);
|
||||
|
||||
input_set_drvdata(input_dev, tsi);
|
||||
|
||||
/* Disable Pen Detect Circuit */
|
||||
da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 1, 0);
|
||||
|
||||
/* Disable ADC */
|
||||
da9052_ts_adc_toggle(tsi, false);
|
||||
|
||||
error = request_threaded_irq(tsi->irq_pendwn,
|
||||
NULL, da9052_ts_pendwn_irq,
|
||||
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
|
||||
"PENDWN", tsi);
|
||||
if (error) {
|
||||
dev_err(tsi->da9052->dev,
|
||||
"Failed to register PENDWN IRQ %d, error = %d\n",
|
||||
tsi->irq_pendwn, error);
|
||||
goto err_free_mem;
|
||||
}
|
||||
|
||||
error = request_threaded_irq(tsi->irq_datardy,
|
||||
NULL, da9052_ts_datardy_irq,
|
||||
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
|
||||
"TSIRDY", tsi);
|
||||
if (error) {
|
||||
dev_err(tsi->da9052->dev,
|
||||
"Failed to register TSIRDY IRQ %d, error = %d\n",
|
||||
tsi->irq_datardy, error);
|
||||
goto err_free_pendwn_irq;
|
||||
}
|
||||
|
||||
/* Mask PEN_DOWN and TSI_READY events */
|
||||
disable_irq(tsi->irq_pendwn);
|
||||
disable_irq(tsi->irq_datardy);
|
||||
|
||||
error = da9052_configure_tsi(tsi);
|
||||
if (error)
|
||||
goto err_free_datardy_irq;
|
||||
|
||||
error = input_register_device(tsi->dev);
|
||||
if (error)
|
||||
goto err_free_datardy_irq;
|
||||
|
||||
platform_set_drvdata(pdev, tsi);
|
||||
|
||||
return 0;
|
||||
|
||||
err_free_datardy_irq:
|
||||
free_irq(tsi->irq_datardy, tsi);
|
||||
err_free_pendwn_irq:
|
||||
free_irq(tsi->irq_pendwn, tsi);
|
||||
err_free_mem:
|
||||
kfree(tsi);
|
||||
input_free_device(input_dev);
|
||||
|
||||
return error;
|
||||
}
|
||||
|
||||
static int __devexit da9052_ts_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct da9052_tsi *tsi = platform_get_drvdata(pdev);
|
||||
|
||||
da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x19);
|
||||
|
||||
free_irq(tsi->irq_pendwn, tsi);
|
||||
free_irq(tsi->irq_datardy, tsi);
|
||||
|
||||
input_unregister_device(tsi->dev);
|
||||
kfree(tsi);
|
||||
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver da9052_tsi_driver = {
|
||||
.probe = da9052_ts_probe,
|
||||
.remove = __devexit_p(da9052_ts_remove),
|
||||
.driver = {
|
||||
.name = "da9052-tsi",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(da9052_tsi_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9052");
|
||||
MODULE_AUTHOR("Anthony Olech <Anthony.Olech@diasemi.com>");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_ALIAS("platform:da9052-tsi");
|
||||
Loading…
Reference in New Issue