mirror of https://gitee.com/openkylin/linux.git
[ALSA] sound/pci: fix-up sleeping paths
ENS1370/1+ driver,ES1968 driver,Intel8x0 driver,VIA82xx driver VIA82xx-modem driver,AC97 Codec,ALI5451 driver,CS46xx driver MIXART driver,RME HDSP driver,Trident driver,YMFPCI driver Description: Fix-up sleeping in sound/pci. These changes fall under the following two categories: 1) Replace schedule_timeout() with msleep() to guarantee the task delays as expected. This also involved replacing/removing custom sleep functions. 2) Do not assume jiffies will only increment by one if you request a 1 jiffy sleep, i.e. use time_after/time_before in while loops. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
This commit is contained in:
parent
072c01194d
commit
ef21ca24fa
|
@ -2227,6 +2227,7 @@ void snd_ac97_restore_iec958(ac97_t *ac97)
|
|||
void snd_ac97_resume(ac97_t *ac97)
|
||||
{
|
||||
int i;
|
||||
unsigned long end_time;
|
||||
|
||||
if (ac97->bus->ops->reset) {
|
||||
ac97->bus->ops->reset(ac97);
|
||||
|
@ -2244,26 +2245,26 @@ void snd_ac97_resume(ac97_t *ac97)
|
|||
snd_ac97_write(ac97, AC97_POWERDOWN, ac97->regs[AC97_POWERDOWN]);
|
||||
if (ac97_is_audio(ac97)) {
|
||||
ac97->bus->ops->write(ac97, AC97_MASTER, 0x8101);
|
||||
for (i = HZ/10; i >= 0; i--) {
|
||||
end_time = jiffies + msecs_to_jiffies(100);
|
||||
do {
|
||||
if (snd_ac97_read(ac97, AC97_MASTER) == 0x8101)
|
||||
break;
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout(1);
|
||||
}
|
||||
} while (time_after_eq(end_time, jiffies));
|
||||
/* FIXME: extra delay */
|
||||
ac97->bus->ops->write(ac97, AC97_MASTER, 0x8000);
|
||||
if (snd_ac97_read(ac97, AC97_MASTER) != 0x8000) {
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout(HZ/4);
|
||||
}
|
||||
if (snd_ac97_read(ac97, AC97_MASTER) != 0x8000)
|
||||
msleep(250);
|
||||
} else {
|
||||
for (i = HZ/10; i >= 0; i--) {
|
||||
end_time = jiffies + msecs_to_jiffies(100);
|
||||
do {
|
||||
unsigned short val = snd_ac97_read(ac97, AC97_EXTENDED_MID);
|
||||
if (val != 0xffff && (val & 1) != 0)
|
||||
break;
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout(1);
|
||||
}
|
||||
} while (time_after_eq(end_time, jiffies));
|
||||
}
|
||||
__reset_ready:
|
||||
|
||||
|
|
|
@ -399,7 +399,7 @@ static int snd_ali_codec_ready( ali_t *codec,
|
|||
unsigned long end_time;
|
||||
unsigned int res;
|
||||
|
||||
end_time = jiffies + 10 * (HZ >> 2);
|
||||
end_time = jiffies + 10 * msecs_to_jiffies(250);
|
||||
do {
|
||||
res = snd_ali_5451_peek(codec,port);
|
||||
if (! (res & 0x8000))
|
||||
|
@ -422,7 +422,7 @@ static int snd_ali_stimer_ready(ali_t *codec, int sched)
|
|||
dwChk1 = snd_ali_5451_peek(codec, ALI_STIMER);
|
||||
dwChk2 = snd_ali_5451_peek(codec, ALI_STIMER);
|
||||
|
||||
end_time = jiffies + 10 * (HZ >> 2);
|
||||
end_time = jiffies + 10 * msecs_to_jiffies(250);
|
||||
do {
|
||||
dwChk2 = snd_ali_5451_peek(codec, ALI_STIMER);
|
||||
if (dwChk2 != dwChk1)
|
||||
|
|
|
@ -2400,8 +2400,7 @@ static void snd_cs46xx_codec_reset (ac97_t * ac97)
|
|||
if ((err = snd_ac97_read(ac97, AC97_REC_GAIN)) == 0x8a05)
|
||||
return;
|
||||
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout(HZ/100);
|
||||
msleep(10);
|
||||
} while (time_after_eq(end_time, jiffies));
|
||||
|
||||
snd_printk("CS46xx secondary codec dont respond!\n");
|
||||
|
@ -2435,8 +2434,7 @@ static int __devinit cs46xx_detect_codec(cs46xx_t *chip, int codec)
|
|||
err = snd_ac97_mixer(chip->ac97_bus, &ac97, &chip->ac97[codec]);
|
||||
return err;
|
||||
}
|
||||
set_current_state(TASK_INTERRUPTIBLE);
|
||||
schedule_timeout(HZ/100);
|
||||
msleep(10);
|
||||
}
|
||||
snd_printdd("snd_cs46xx: codec %d detection timeout\n", codec);
|
||||
return -ENXIO;
|
||||
|
@ -3018,8 +3016,7 @@ static int snd_cs46xx_chip_init(cs46xx_t *chip)
|
|||
/*
|
||||
* Wait until the PLL has stabilized.
|
||||
*/
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout(HZ/10); /* 100ms */
|
||||
msleep(100);
|
||||
|
||||
/*
|
||||
* Turn on clocking of the core so that we can setup the serial ports.
|
||||
|
@ -3072,8 +3069,7 @@ static int snd_cs46xx_chip_init(cs46xx_t *chip)
|
|||
*/
|
||||
if (snd_cs46xx_peekBA0(chip, BA0_ACSTS) & ACSTS_CRDY)
|
||||
goto ok1;
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout((HZ+99)/100);
|
||||
msleep(10);
|
||||
}
|
||||
|
||||
|
||||
|
@ -3122,8 +3118,7 @@ static int snd_cs46xx_chip_init(cs46xx_t *chip)
|
|||
*/
|
||||
if ((snd_cs46xx_peekBA0(chip, BA0_ACISV) & (ACISV_ISV3 | ACISV_ISV4)) == (ACISV_ISV3 | ACISV_ISV4))
|
||||
goto ok2;
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout((HZ+99)/100);
|
||||
msleep(10);
|
||||
}
|
||||
|
||||
#ifndef CONFIG_SND_CS46XX_NEW_DSP
|
||||
|
|
|
@ -2018,21 +2018,11 @@ static int __devinit snd_ensoniq_create(snd_card_t * card,
|
|||
if (pci->vendor == es1371_ac97_reset_hack[idx].vid &&
|
||||
pci->device == es1371_ac97_reset_hack[idx].did &&
|
||||
ensoniq->rev == es1371_ac97_reset_hack[idx].rev) {
|
||||
unsigned long tmo;
|
||||
signed long tmo2;
|
||||
|
||||
ensoniq->cssr |= ES_1371_ST_AC97_RST;
|
||||
outl(ensoniq->cssr, ES_REG(ensoniq, STATUS));
|
||||
/* need to delay around 20ms(bleech) to give
|
||||
some CODECs enough time to wakeup */
|
||||
tmo = jiffies + (HZ / 50) + 1;
|
||||
while (1) {
|
||||
tmo2 = tmo - jiffies;
|
||||
if (tmo2 <= 0)
|
||||
break;
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout(tmo2);
|
||||
}
|
||||
msleep(20);
|
||||
break;
|
||||
}
|
||||
/* AC'97 warm reset to start the bitclk */
|
||||
|
|
|
@ -664,11 +664,6 @@ static inline u16 maestro_read(es1968_t *chip, u16 reg)
|
|||
return result;
|
||||
}
|
||||
|
||||
#define big_mdelay(msec) do {\
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);\
|
||||
schedule_timeout(((msec) * HZ + 999) / 1000);\
|
||||
} while (0)
|
||||
|
||||
/* Wait for the codec bus to be free */
|
||||
static int snd_es1968_ac97_wait(es1968_t *chip)
|
||||
{
|
||||
|
@ -1809,8 +1804,7 @@ static void __devinit es1968_measure_clock(es1968_t *chip)
|
|||
snd_es1968_trigger_apu(chip, apu, ESM_APU_16BITLINEAR);
|
||||
do_gettimeofday(&start_time);
|
||||
spin_unlock_irq(&chip->reg_lock);
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout(HZ / 20); /* 50 msec */
|
||||
msleep(50);
|
||||
spin_lock_irq(&chip->reg_lock);
|
||||
offset = __apu_get_register(chip, apu, 5);
|
||||
do_gettimeofday(&stop_time);
|
||||
|
@ -2093,7 +2087,7 @@ static void snd_es1968_ac97_reset(es1968_t *chip)
|
|||
outw(0x0000, ioaddr + 0x60); /* write 0 to gpio 0 */
|
||||
udelay(20);
|
||||
outw(0x0001, ioaddr + 0x60); /* write 1 to gpio 1 */
|
||||
big_mdelay(20);
|
||||
msleep(20);
|
||||
|
||||
outw(save_68 | 0x1, ioaddr + 0x68); /* now restore .. */
|
||||
outw((inw(ioaddr + 0x38) & 0xfffc) | 0x1, ioaddr + 0x38);
|
||||
|
@ -2109,7 +2103,7 @@ static void snd_es1968_ac97_reset(es1968_t *chip)
|
|||
outw(0x0001, ioaddr + 0x60); /* write 1 to gpio */
|
||||
udelay(20);
|
||||
outw(0x0009, ioaddr + 0x60); /* write 9 to gpio */
|
||||
big_mdelay(500);
|
||||
msleep(500);
|
||||
//outw(inw(ioaddr + 0x38) & 0xfffc, ioaddr + 0x38);
|
||||
outw(inw(ioaddr + 0x3a) & 0xfffc, ioaddr + 0x3a);
|
||||
outw(inw(ioaddr + 0x3c) & 0xfffc, ioaddr + 0x3c);
|
||||
|
@ -2135,7 +2129,7 @@ static void snd_es1968_ac97_reset(es1968_t *chip)
|
|||
|
||||
if (w > 10000) {
|
||||
outb(inb(ioaddr + 0x37) | 0x08, ioaddr + 0x37); /* do a software reset */
|
||||
big_mdelay(500); /* oh my.. */
|
||||
msleep(500); /* oh my.. */
|
||||
outb(inb(ioaddr + 0x37) & ~0x08,
|
||||
ioaddr + 0x37);
|
||||
udelay(1);
|
||||
|
|
|
@ -2464,8 +2464,7 @@ static void __devinit intel8x0_measure_ac97_clock(intel8x0_t *chip)
|
|||
}
|
||||
do_gettimeofday(&start_time);
|
||||
spin_unlock_irq(&chip->reg_lock);
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout(HZ / 20);
|
||||
msleep(50);
|
||||
spin_lock_irq(&chip->reg_lock);
|
||||
/* check the position */
|
||||
pos = ichdev->fragsize1;
|
||||
|
|
|
@ -445,9 +445,9 @@ static int snd_mixart_trigger(snd_pcm_substream_t *subs, int cmd)
|
|||
|
||||
static int mixart_sync_nonblock_events(mixart_mgr_t *mgr)
|
||||
{
|
||||
int timeout = HZ;
|
||||
unsigned long timeout = jiffies + HZ;
|
||||
while (atomic_read(&mgr->msg_processed) > 0) {
|
||||
if (! timeout--) {
|
||||
if (time_after(jiffies, timeout)) {
|
||||
snd_printk(KERN_ERR "mixart: cannot process nonblock events!\n");
|
||||
return -EBUSY;
|
||||
}
|
||||
|
|
|
@ -679,8 +679,7 @@ static int snd_hdsp_load_firmware_from_cache(hdsp_t *hdsp) {
|
|||
}
|
||||
|
||||
if ((1000 / HZ) < 3000) {
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout((3000 * HZ + 999) / 1000);
|
||||
ssleep(3);
|
||||
} else {
|
||||
mdelay(3000);
|
||||
}
|
||||
|
@ -5080,8 +5079,7 @@ static int __devinit snd_hdsp_create(snd_card_t *card,
|
|||
if (!is_9652 && !is_9632) {
|
||||
/* we wait 2 seconds to let freshly inserted cardbus cards do their hardware init */
|
||||
if ((1000 / HZ) < 2000) {
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout((2000 * HZ + 999) / 1000);
|
||||
ssleep(2);
|
||||
} else {
|
||||
mdelay(2000);
|
||||
}
|
||||
|
|
|
@ -3153,8 +3153,7 @@ static int snd_trident_gameport_open(struct gameport *gameport, int mode)
|
|||
switch (mode) {
|
||||
case GAMEPORT_MODE_COOKED:
|
||||
outb(GAMEPORT_MODE_ADC, TRID_REG(chip, GAMEPORT_GCR));
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout(1 + 20 * HZ / 1000); /* 20msec */
|
||||
msleep(20);
|
||||
return 0;
|
||||
case GAMEPORT_MODE_RAW:
|
||||
outb(0, TRID_REG(chip, GAMEPORT_GCR));
|
||||
|
|
|
@ -547,8 +547,7 @@ static void snd_via82xx_codec_wait(ac97_t *ac97)
|
|||
int err;
|
||||
err = snd_via82xx_codec_ready(chip, ac97->num);
|
||||
/* here we need to wait fairly for long time.. */
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout(HZ/2);
|
||||
msleep(500);
|
||||
}
|
||||
|
||||
static void snd_via82xx_codec_write(ac97_t *ac97,
|
||||
|
@ -1847,7 +1846,7 @@ static void __devinit snd_via82xx_proc_init(via82xx_t *chip)
|
|||
static int snd_via82xx_chip_init(via82xx_t *chip)
|
||||
{
|
||||
unsigned int val;
|
||||
int max_count;
|
||||
unsigned long end_time;
|
||||
unsigned char pval;
|
||||
|
||||
#if 0 /* broken on K7M? */
|
||||
|
@ -1889,14 +1888,14 @@ static int snd_via82xx_chip_init(via82xx_t *chip)
|
|||
}
|
||||
|
||||
/* wait until codec ready */
|
||||
max_count = ((3 * HZ) / 4) + 1;
|
||||
end_time = jiffies + msecs_to_jiffies(750);
|
||||
do {
|
||||
pci_read_config_byte(chip->pci, VIA_ACLINK_STAT, &pval);
|
||||
if (pval & VIA_ACLINK_C00_READY) /* primary codec ready */
|
||||
break;
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout(1);
|
||||
} while (--max_count > 0);
|
||||
} while (time_before(jiffies, end_time));
|
||||
|
||||
if ((val = snd_via82xx_codec_xread(chip)) & VIA_REG_AC97_BUSY)
|
||||
snd_printk("AC'97 codec is not ready [0x%x]\n", val);
|
||||
|
@ -1905,7 +1904,7 @@ static int snd_via82xx_chip_init(via82xx_t *chip)
|
|||
snd_via82xx_codec_xwrite(chip, VIA_REG_AC97_READ |
|
||||
VIA_REG_AC97_SECONDARY_VALID |
|
||||
(VIA_REG_AC97_CODEC_ID_SECONDARY << VIA_REG_AC97_CODEC_ID_SHIFT));
|
||||
max_count = ((3 * HZ) / 4) + 1;
|
||||
end_time = jiffies + msecs_to_jiffies(750);
|
||||
snd_via82xx_codec_xwrite(chip, VIA_REG_AC97_READ |
|
||||
VIA_REG_AC97_SECONDARY_VALID |
|
||||
(VIA_REG_AC97_CODEC_ID_SECONDARY << VIA_REG_AC97_CODEC_ID_SHIFT));
|
||||
|
@ -1916,7 +1915,7 @@ static int snd_via82xx_chip_init(via82xx_t *chip)
|
|||
}
|
||||
set_current_state(TASK_INTERRUPTIBLE);
|
||||
schedule_timeout(1);
|
||||
} while (--max_count > 0);
|
||||
} while (time_before(jiffies, end_time));
|
||||
/* This is ok, the most of motherboards have only one codec */
|
||||
|
||||
__ac97_ok2:
|
||||
|
|
|
@ -408,8 +408,7 @@ static void snd_via82xx_codec_wait(ac97_t *ac97)
|
|||
int err;
|
||||
err = snd_via82xx_codec_ready(chip, ac97->num);
|
||||
/* here we need to wait fairly for long time.. */
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout(HZ/2);
|
||||
msleep(500);
|
||||
}
|
||||
|
||||
static void snd_via82xx_codec_write(ac97_t *ac97,
|
||||
|
@ -923,7 +922,7 @@ static void __devinit snd_via82xx_proc_init(via82xx_t *chip)
|
|||
static int snd_via82xx_chip_init(via82xx_t *chip)
|
||||
{
|
||||
unsigned int val;
|
||||
int max_count;
|
||||
unsigned long end_time;
|
||||
unsigned char pval;
|
||||
|
||||
pci_read_config_byte(chip->pci, VIA_MC97_CTRL, &pval);
|
||||
|
@ -962,14 +961,14 @@ static int snd_via82xx_chip_init(via82xx_t *chip)
|
|||
}
|
||||
|
||||
/* wait until codec ready */
|
||||
max_count = ((3 * HZ) / 4) + 1;
|
||||
end_time = jiffies + msecs_to_jiffies(750);
|
||||
do {
|
||||
pci_read_config_byte(chip->pci, VIA_ACLINK_STAT, &pval);
|
||||
if (pval & VIA_ACLINK_C00_READY) /* primary codec ready */
|
||||
break;
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout(1);
|
||||
} while (--max_count > 0);
|
||||
} while (time_before(jiffies, end_time));
|
||||
|
||||
if ((val = snd_via82xx_codec_xread(chip)) & VIA_REG_AC97_BUSY)
|
||||
snd_printk("AC'97 codec is not ready [0x%x]\n", val);
|
||||
|
@ -977,7 +976,7 @@ static int snd_via82xx_chip_init(via82xx_t *chip)
|
|||
snd_via82xx_codec_xwrite(chip, VIA_REG_AC97_READ |
|
||||
VIA_REG_AC97_SECONDARY_VALID |
|
||||
(VIA_REG_AC97_CODEC_ID_SECONDARY << VIA_REG_AC97_CODEC_ID_SHIFT));
|
||||
max_count = ((3 * HZ) / 4) + 1;
|
||||
end_time = jiffies + msecs_to_jiffies(750);
|
||||
snd_via82xx_codec_xwrite(chip, VIA_REG_AC97_READ |
|
||||
VIA_REG_AC97_SECONDARY_VALID |
|
||||
(VIA_REG_AC97_CODEC_ID_SECONDARY << VIA_REG_AC97_CODEC_ID_SHIFT));
|
||||
|
@ -988,7 +987,7 @@ static int snd_via82xx_chip_init(via82xx_t *chip)
|
|||
}
|
||||
set_current_state(TASK_INTERRUPTIBLE);
|
||||
schedule_timeout(1);
|
||||
} while (--max_count > 0);
|
||||
} while (time_before(jiffies, end_time));
|
||||
/* This is ok, the most of motherboards have only one codec */
|
||||
|
||||
__ac97_ok2:
|
||||
|
|
|
@ -84,16 +84,16 @@ static inline void snd_ymfpci_writel(ymfpci_t *chip, u32 offset, u32 val)
|
|||
|
||||
static int snd_ymfpci_codec_ready(ymfpci_t *chip, int secondary)
|
||||
{
|
||||
signed long end_time;
|
||||
unsigned long end_time;
|
||||
u32 reg = secondary ? YDSXGR_SECSTATUSADR : YDSXGR_PRISTATUSADR;
|
||||
|
||||
end_time = (jiffies + ((3 * HZ) / 4)) + 1;
|
||||
end_time = jiffies + msecs_to_jiffies(750);
|
||||
do {
|
||||
if ((snd_ymfpci_readw(chip, reg) & 0x8000) == 0)
|
||||
return 0;
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
schedule_timeout(1);
|
||||
} while (end_time - (signed long)jiffies >= 0);
|
||||
} while (time_before(jiffies, end_time));
|
||||
snd_printk("codec_ready: codec %i is not ready [0x%x]\n", secondary, snd_ymfpci_readw(chip, reg));
|
||||
return -EBUSY;
|
||||
}
|
||||
|
|
Loading…
Reference in New Issue