mirror of https://gitee.com/openkylin/linux.git
Second and final device tree updates towards 5.10-rc1 for TI K3 platform.
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAl93K8EACgkQ3bWEnRc2 JJ1hhQ/+Kaak1RosL3a0AZ4tBPAkWm/CVduyKOxLZahBfHzD2pZkHhKyfwGBRFOn CoLCMTMrY19xnOkUYzUTu5bkoxvLI1YuAkvYG/Sx6yBZU4ImTlVpzmmkeE4nJYBI X8Z+oysSx7kgTVxmPbweDPVtUJ99G4yhWNlFp+v2rfWM+mCK6d6ELZkkJVQBS18l iD8rYlL9885CsowILycWGZ855z59DLxeIqy52K62+rhDaOgYz56ZnNYhWg+5RDPB ZOAvXhtMJHVUekorqD6i9FQqWfVda0rTR+KiDz4UBn8NLyFmmGbArl3bQ4CMg9+q Chm6Ri9f46uZYZU9bNny9rZtYfu5z6rvAS+kDaq3BwumMcSdy/ULjgP8UR0XJfHS sLWw1OmDHYf7V9YUXxKemSwySCKVbgoIwzZPu006fNovXKETsTi/Hu70EWEepkRF aLnjLqSxNBkdwQYy04bSzchPOaHLWWBNAczWABAQvg6pRvTQbK6+mGHnTheIM5Ve GH/qeVNWdhurVXlm76i8bHS7oBTfSSia2VVKZSuQOplruwjC8DHKkTeaMxDtXieX 1qGfT6jimkduTmzzW+u7OMc4TsP/PCsaFh5qk7QrmqvrXhQWJouCOuso/7LyTwqK 4rAN0LSq1kosDFjKCeEBsJ6uhc85DjNBYVFfftvhZDN2tFwJNr0= =tuvx -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-for-v5.10-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt Second and final device tree updates towards 5.10-rc1 for TI K3 platform. * tag 'ti-k3-dt-for-v5.10-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (23 commits) arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC arm64: dts: ti: k3-j721e-common-proc-board: align GPIO hog names with dtschema arm64: dts: ti: k3-j7200-common-proc-board: Add support for eMMC and SD card arm64: dts: ti: k3-j7200-main: Add support for MMC/SD controller nodes arm64: dts: ti: k3-j7200-som-p0: Add HyperFlash node arm64: dts: ti: k3-j7200-mcu-wakeup: Add HyperBus node arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders arm64: dts: ti: k3-j7200: Add I2C nodes arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux and phy defs arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node arm64: dts: ti: k3-j7200-main: add main navss cpts node arm64: dts: ti: k3-j7200: add DMA support arm64: dts: ti: Add support for J7200 Common Processor Board arm64: dts: ti: Add support for J7200 SoC dt-bindings: arm: ti: Add bindings for J7200 SoC ... Link: https://lore.kernel.org/r/20201002134559.orvmgbns57qlyn3i@akan Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
commit
ef3c139ba0
|
@ -1,26 +0,0 @@
|
|||
Texas Instruments K3 Multicore SoC architecture device tree bindings
|
||||
--------------------------------------------------------------------
|
||||
|
||||
Platforms based on Texas Instruments K3 Multicore SoC architecture
|
||||
shall follow the following scheme:
|
||||
|
||||
SoCs
|
||||
----
|
||||
|
||||
Each device tree root node must specify which exact SoC in K3 Multicore SoC
|
||||
architecture it uses, using one of the following compatible values:
|
||||
|
||||
- AM654
|
||||
compatible = "ti,am654";
|
||||
|
||||
- J721E
|
||||
compatible = "ti,j721e";
|
||||
|
||||
Boards
|
||||
------
|
||||
|
||||
In addition, each device tree root node must specify which one or more
|
||||
of the following board-specific compatible values:
|
||||
|
||||
- AM654 EVM
|
||||
compatible = "ti,am654-evm", "ti,am654";
|
|
@ -0,0 +1,35 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/arm/ti/k3.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Texas Instruments K3 Multicore SoC architecture device tree bindings
|
||||
|
||||
maintainers:
|
||||
- Nishanth Menon <nm@ti.com>
|
||||
|
||||
description: |
|
||||
Platforms based on Texas Instruments K3 Multicore SoC architecture
|
||||
shall have the following properties.
|
||||
|
||||
properties:
|
||||
$nodename:
|
||||
const: '/'
|
||||
compatible:
|
||||
oneOf:
|
||||
|
||||
- description: K3 AM654 SoC
|
||||
items:
|
||||
- enum:
|
||||
- ti,am654-evm
|
||||
- const: ti,am654
|
||||
|
||||
- description: K3 J721E SoC
|
||||
items:
|
||||
- const: ti,j721e
|
||||
|
||||
- description: K3 J7200 SoC
|
||||
items:
|
||||
- const: ti,j7200
|
||||
...
|
|
@ -2637,7 +2637,7 @@ M: Tero Kristo <t-kristo@ti.com>
|
|||
M: Nishanth Menon <nm@ti.com>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Supported
|
||||
F: Documentation/devicetree/bindings/arm/ti/k3.txt
|
||||
F: Documentation/devicetree/bindings/arm/ti/k3.yaml
|
||||
F: arch/arm64/boot/dts/ti/Makefile
|
||||
F: arch/arm64/boot/dts/ti/k3-*
|
||||
F: include/dt-bindings/pinctrl/k3.h
|
||||
|
|
|
@ -3,9 +3,11 @@
|
|||
# Make file to build device tree binaries for boards based on
|
||||
# Texas Instruments Inc processors
|
||||
#
|
||||
# Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
|
||||
# Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
|
||||
#
|
||||
|
||||
dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb
|
||||
dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
|
||||
|
||||
dtb-$(CONFIG_ARCH_K3_J721E_SOC) += k3-j721e-common-proc-board.dtb
|
||||
dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb
|
||||
|
||||
dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb
|
||||
|
|
|
@ -0,0 +1,215 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "k3-j7200-som-p0.dtsi"
|
||||
#include <dt-bindings/net/ti-dp83867.h>
|
||||
#include <dt-bindings/mux/ti-serdes.h>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
|
||||
};
|
||||
};
|
||||
|
||||
&wkup_pmx0 {
|
||||
mcu_cpsw_pins_default: mcu-cpsw-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
|
||||
J721E_WKUP_IOPAD(0x006c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
|
||||
J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
|
||||
J721E_WKUP_IOPAD(0x0074, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
|
||||
J721E_WKUP_IOPAD(0x0078, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
|
||||
J721E_WKUP_IOPAD(0x007c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
|
||||
J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
|
||||
J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
|
||||
J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
|
||||
J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
|
||||
J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_TXC */
|
||||
J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
|
||||
>;
|
||||
};
|
||||
|
||||
mcu_mdio_pins_default: mcu-mdio1-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
J721E_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
|
||||
J721E_WKUP_IOPAD(0x0098, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&main_pmx0 {
|
||||
main_i2c0_pins_default: main-i2c0-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
|
||||
J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
|
||||
>;
|
||||
};
|
||||
|
||||
main_i2c1_pins_default: main-i2c1-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */
|
||||
J721E_IOPAD(0xe0, PIN_INPUT_PULLUP, 3) /* (T3) EXT_REFCLK1.I2C1_SDA */
|
||||
>;
|
||||
};
|
||||
|
||||
main_mmc1_pins_default: main-mmc1-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
J721E_IOPAD(0x104, PIN_INPUT, 0) /* (M20) MMC1_CMD */
|
||||
J721E_IOPAD(0x100, PIN_INPUT, 0) /* (P21) MMC1_CLK */
|
||||
J721E_IOPAD(0xfc, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
|
||||
J721E_IOPAD(0xf8, PIN_INPUT, 0) /* (M19) MMC1_DAT0 */
|
||||
J721E_IOPAD(0xf4, PIN_INPUT, 0) /* (N21) MMC1_DAT1 */
|
||||
J721E_IOPAD(0xf0, PIN_INPUT, 0) /* (N20) MMC1_DAT2 */
|
||||
J721E_IOPAD(0xec, PIN_INPUT, 0) /* (N19) MMC1_DAT3 */
|
||||
J721E_IOPAD(0xe4, PIN_INPUT, 8) /* (V1) TIMER_IO0.MMC1_SDCD */
|
||||
>;
|
||||
};
|
||||
|
||||
main_usbss0_pins_default: main-usbss0-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&wkup_uart0 {
|
||||
/* Wakeup UART is used by System firmware */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&main_uart0 {
|
||||
/* Shared with ATF on this platform */
|
||||
power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
|
||||
};
|
||||
|
||||
&main_uart2 {
|
||||
/* MAIN UART 2 is used by R5F firmware */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&main_uart3 {
|
||||
/* UART not brought out */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&main_uart4 {
|
||||
/* UART not brought out */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&main_uart5 {
|
||||
/* UART not brought out */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&main_uart6 {
|
||||
/* UART not brought out */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&main_uart7 {
|
||||
/* UART not brought out */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&main_uart8 {
|
||||
/* UART not brought out */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&main_uart9 {
|
||||
/* UART not brought out */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mcu_cpsw {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
|
||||
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpsw_port1 {
|
||||
phy-mode = "rgmii-rxid";
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
&main_i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_i2c0_pins_default>;
|
||||
clock-frequency = <400000>;
|
||||
|
||||
exp1: gpio@20 {
|
||||
compatible = "ti,tca6416";
|
||||
reg = <0x20>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
exp2: gpio@22 {
|
||||
compatible = "ti,tca6424";
|
||||
reg = <0x22>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&main_i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_i2c1_pins_default>;
|
||||
clock-frequency = <400000>;
|
||||
|
||||
exp4: gpio@20 {
|
||||
compatible = "ti,tca6408";
|
||||
reg = <0x20>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&main_sdhci0 {
|
||||
/* eMMC */
|
||||
non-removable;
|
||||
ti,driver-strength-ohm = <50>;
|
||||
disable-wp;
|
||||
};
|
||||
|
||||
&main_sdhci1 {
|
||||
/* SD card */
|
||||
pinctrl-0 = <&main_mmc1_pins_default>;
|
||||
pinctrl-names = "default";
|
||||
ti,driver-strength-ohm = <50>;
|
||||
disable-wp;
|
||||
};
|
||||
|
||||
&serdes_ln_ctrl {
|
||||
idle-states = <J7200_SERDES0_LANE0_PCIE1_LANE0>, <J7200_SERDES0_LANE1_PCIE1_LANE1>,
|
||||
<J7200_SERDES0_LANE2_QSGMII_LANE1>, <J7200_SERDES0_LANE3_IP4_UNUSED>;
|
||||
};
|
||||
|
||||
&usb_serdes_mux {
|
||||
idle-states = <1>; /* USB0 to SERDES lane 3 */
|
||||
};
|
||||
|
||||
&usbss0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&main_usbss0_pins_default>;
|
||||
ti,vbus-divider;
|
||||
ti,usb2-only;
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
dr_mode = "otg";
|
||||
maximum-speed = "high-speed";
|
||||
};
|
|
@ -0,0 +1,449 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for J7200 SoC Family Main Domain peripherals
|
||||
*
|
||||
* Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
|
||||
*/
|
||||
|
||||
&cbass_main {
|
||||
msmc_ram: sram@70000000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x00 0x70000000 0x00 0x100000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x00 0x00 0x70000000 0x100000>;
|
||||
|
||||
atf-sram@0 {
|
||||
reg = <0x00 0x20000>;
|
||||
};
|
||||
};
|
||||
|
||||
scm_conf: scm-conf@100000 {
|
||||
compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
|
||||
reg = <0x00 0x00100000 0x00 0x1c000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x00 0x00 0x00100000 0x1c000>;
|
||||
|
||||
serdes_ln_ctrl: serdes-ln-ctrl@4080 {
|
||||
compatible = "mmio-mux";
|
||||
#mux-control-cells = <1>;
|
||||
mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
|
||||
<0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */
|
||||
};
|
||||
|
||||
usb_serdes_mux: mux-controller@4000 {
|
||||
compatible = "mmio-mux";
|
||||
#mux-control-cells = <1>;
|
||||
mux-reg-masks = <0x4000 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
|
||||
};
|
||||
};
|
||||
|
||||
gic500: interrupt-controller@1800000 {
|
||||
compatible = "arm,gic-v3";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
#interrupt-cells = <3>;
|
||||
interrupt-controller;
|
||||
reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
|
||||
<0x00 0x01900000 0x00 0x100000>; /* GICR */
|
||||
|
||||
/* vcpumntirq: virtual CPU interface maintenance interrupt */
|
||||
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
gic_its: msi-controller@1820000 {
|
||||
compatible = "arm,gic-v3-its";
|
||||
reg = <0x00 0x01820000 0x00 0x10000>;
|
||||
socionext,synquacer-pre-its = <0x1000000 0x400000>;
|
||||
msi-controller;
|
||||
#msi-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
main_gpio_intr: interrupt-controller0 {
|
||||
compatible = "ti,sci-intr";
|
||||
ti,intr-trigger-type = <1>;
|
||||
interrupt-controller;
|
||||
interrupt-parent = <&gic500>;
|
||||
#interrupt-cells = <1>;
|
||||
ti,sci = <&dmsc>;
|
||||
ti,sci-dev-id = <131>;
|
||||
ti,interrupt-ranges = <8 392 56>;
|
||||
};
|
||||
|
||||
main_navss: bus@30000000 {
|
||||
compatible = "simple-mfd";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
|
||||
ti,sci-dev-id = <199>;
|
||||
|
||||
main_navss_intr: interrupt-controller1 {
|
||||
compatible = "ti,sci-intr";
|
||||
ti,intr-trigger-type = <4>;
|
||||
interrupt-controller;
|
||||
interrupt-parent = <&gic500>;
|
||||
#interrupt-cells = <1>;
|
||||
ti,sci = <&dmsc>;
|
||||
ti,sci-dev-id = <213>;
|
||||
ti,interrupt-ranges = <0 64 64>,
|
||||
<64 448 64>,
|
||||
<128 672 64>;
|
||||
};
|
||||
|
||||
main_udmass_inta: msi-controller@33d00000 {
|
||||
compatible = "ti,sci-inta";
|
||||
reg = <0x00 0x33d00000 0x00 0x100000>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <0>;
|
||||
interrupt-parent = <&main_navss_intr>;
|
||||
msi-controller;
|
||||
ti,sci = <&dmsc>;
|
||||
ti,sci-dev-id = <209>;
|
||||
ti,interrupt-ranges = <0 0 256>;
|
||||
};
|
||||
|
||||
secure_proxy_main: mailbox@32c00000 {
|
||||
compatible = "ti,am654-secure-proxy";
|
||||
#mbox-cells = <1>;
|
||||
reg-names = "target_data", "rt", "scfg";
|
||||
reg = <0x00 0x32c00000 0x00 0x100000>,
|
||||
<0x00 0x32400000 0x00 0x100000>,
|
||||
<0x00 0x32800000 0x00 0x100000>;
|
||||
interrupt-names = "rx_011";
|
||||
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
main_ringacc: ringacc@3c000000 {
|
||||
compatible = "ti,am654-navss-ringacc";
|
||||
reg = <0x00 0x3c000000 0x00 0x400000>,
|
||||
<0x00 0x38000000 0x00 0x400000>,
|
||||
<0x00 0x31120000 0x00 0x100>,
|
||||
<0x00 0x33000000 0x00 0x40000>;
|
||||
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
|
||||
ti,num-rings = <1024>;
|
||||
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
|
||||
ti,sci = <&dmsc>;
|
||||
ti,sci-dev-id = <211>;
|
||||
msi-parent = <&main_udmass_inta>;
|
||||
};
|
||||
|
||||
main_udmap: dma-controller@31150000 {
|
||||
compatible = "ti,j721e-navss-main-udmap";
|
||||
reg = <0x00 0x31150000 0x00 0x100>,
|
||||
<0x00 0x34000000 0x00 0x100000>,
|
||||
<0x00 0x35000000 0x00 0x100000>;
|
||||
reg-names = "gcfg", "rchanrt", "tchanrt";
|
||||
msi-parent = <&main_udmass_inta>;
|
||||
#dma-cells = <1>;
|
||||
|
||||
ti,sci = <&dmsc>;
|
||||
ti,sci-dev-id = <212>;
|
||||
ti,ringacc = <&main_ringacc>;
|
||||
|
||||
ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
|
||||
<0x0f>, /* TX_HCHAN */
|
||||
<0x10>; /* TX_UHCHAN */
|
||||
ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
|
||||
<0x0b>, /* RX_HCHAN */
|
||||
<0x0c>; /* RX_UHCHAN */
|
||||
ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
|
||||
};
|
||||
|
||||
cpts@310d0000 {
|
||||
compatible = "ti,j721e-cpts";
|
||||
reg = <0x00 0x310d0000 0x00 0x400>;
|
||||
reg-names = "cpts";
|
||||
clocks = <&k3_clks 201 1>;
|
||||
clock-names = "cpts";
|
||||
interrupts-extended = <&main_navss_intr 391>;
|
||||
interrupt-names = "cpts";
|
||||
ti,cpts-periodic-outputs = <6>;
|
||||
ti,cpts-ext-ts-inputs = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
main_pmx0: pinctrl@11c000 {
|
||||
compatible = "pinctrl-single";
|
||||
/* Proxy 0 addressing */
|
||||
reg = <0x00 0x11c000 0x00 0x2b4>;
|
||||
#pinctrl-cells = <1>;
|
||||
pinctrl-single,register-width = <32>;
|
||||
pinctrl-single,function-mask = <0xffffffff>;
|
||||
};
|
||||
|
||||
main_uart0: serial@2800000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02800000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 146 2>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart1: serial@2810000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02810000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 278 2>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart2: serial@2820000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02820000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 279 2>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart3: serial@2830000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02830000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 280 2>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart4: serial@2840000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02840000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 281 2>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart5: serial@2850000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02850000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 282 2>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart6: serial@2860000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02860000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 283 2>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart7: serial@2870000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02870000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 284 2>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart8: serial@2880000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02880000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 285 2>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart9: serial@2890000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02890000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 286 2>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_i2c0: i2c@2000000 {
|
||||
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
||||
reg = <0x00 0x2000000 0x00 0x100>;
|
||||
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-names = "fck";
|
||||
clocks = <&k3_clks 187 1>;
|
||||
power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
|
||||
};
|
||||
|
||||
main_i2c1: i2c@2010000 {
|
||||
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
||||
reg = <0x00 0x2010000 0x00 0x100>;
|
||||
interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-names = "fck";
|
||||
clocks = <&k3_clks 188 1>;
|
||||
power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
|
||||
};
|
||||
|
||||
main_i2c2: i2c@2020000 {
|
||||
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
||||
reg = <0x00 0x2020000 0x00 0x100>;
|
||||
interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-names = "fck";
|
||||
clocks = <&k3_clks 189 1>;
|
||||
power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
|
||||
};
|
||||
|
||||
main_i2c3: i2c@2030000 {
|
||||
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
||||
reg = <0x00 0x2030000 0x00 0x100>;
|
||||
interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-names = "fck";
|
||||
clocks = <&k3_clks 190 1>;
|
||||
power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
|
||||
};
|
||||
|
||||
main_i2c4: i2c@2040000 {
|
||||
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
||||
reg = <0x00 0x2040000 0x00 0x100>;
|
||||
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-names = "fck";
|
||||
clocks = <&k3_clks 191 1>;
|
||||
power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
|
||||
};
|
||||
|
||||
main_i2c5: i2c@2050000 {
|
||||
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
||||
reg = <0x00 0x2050000 0x00 0x100>;
|
||||
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-names = "fck";
|
||||
clocks = <&k3_clks 192 1>;
|
||||
power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
|
||||
};
|
||||
|
||||
main_i2c6: i2c@2060000 {
|
||||
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
||||
reg = <0x00 0x2060000 0x00 0x100>;
|
||||
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-names = "fck";
|
||||
clocks = <&k3_clks 193 1>;
|
||||
power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
|
||||
};
|
||||
|
||||
main_sdhci0: mmc@4f80000 {
|
||||
compatible = "ti,j7200-sdhci-8bit", "ti,j721e-sdhci-8bit";
|
||||
reg = <0x00 0x04f80000 0x00 0x260>, <0x00 0x4f88000 0x00 0x134>;
|
||||
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
|
||||
clock-names = "clk_xin", "clk_ahb";
|
||||
clocks = <&k3_clks 91 3>, <&k3_clks 91 0>;
|
||||
ti,otap-del-sel-legacy = <0x0>;
|
||||
ti,otap-del-sel-mmc-hs = <0x0>;
|
||||
ti,otap-del-sel-ddr52 = <0x6>;
|
||||
ti,otap-del-sel-hs200 = <0x8>;
|
||||
ti,otap-del-sel-hs400 = <0x0>;
|
||||
ti,strobe-sel = <0x77>;
|
||||
ti,trm-icp = <0x8>;
|
||||
bus-width = <8>;
|
||||
mmc-ddr-1_8v;
|
||||
dma-coherent;
|
||||
};
|
||||
|
||||
main_sdhci1: mmc@4fb0000 {
|
||||
compatible = "ti,j7200-sdhci-4bit", "ti,j721e-sdhci-4bit";
|
||||
reg = <0x00 0x04fb0000 0x00 0x260>, <0x00 0x4fb8000 0x00 0x134>;
|
||||
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
||||
power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
|
||||
clock-names = "clk_xin", "clk_ahb";
|
||||
clocks = <&k3_clks 92 2>, <&k3_clks 92 1>;
|
||||
ti,otap-del-sel-legacy = <0x0>;
|
||||
ti,otap-del-sel-sd-hs = <0x0>;
|
||||
ti,otap-del-sel-sdr12 = <0xf>;
|
||||
ti,otap-del-sel-sdr25 = <0xf>;
|
||||
ti,otap-del-sel-sdr50 = <0xc>;
|
||||
ti,otap-del-sel-sdr104 = <0x5>;
|
||||
ti,otap-del-sel-ddr50 = <0xc>;
|
||||
no-1-8-v;
|
||||
dma-coherent;
|
||||
};
|
||||
|
||||
usbss0: cdns-usb@4104000 {
|
||||
compatible = "ti,j721e-usb";
|
||||
reg = <0x00 0x4104000 0x00 0x100>;
|
||||
dma-coherent;
|
||||
power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 288 12>, <&k3_clks 288 3>;
|
||||
clock-names = "ref", "lpm";
|
||||
assigned-clocks = <&k3_clks 288 12>; /* USB2_REFCLK */
|
||||
assigned-clock-parents = <&k3_clks 288 13>; /* HFOSC0 */
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
usb0: usb@6000000 {
|
||||
compatible = "cdns,usb3";
|
||||
reg = <0x00 0x6000000 0x00 0x10000>,
|
||||
<0x00 0x6010000 0x00 0x10000>,
|
||||
<0x00 0x6020000 0x00 0x10000>;
|
||||
reg-names = "otg", "xhci", "dev";
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
|
||||
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
|
||||
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */
|
||||
interrupt-names = "host",
|
||||
"peripheral",
|
||||
"otg";
|
||||
maximum-speed = "super-speed";
|
||||
dr_mode = "otg";
|
||||
};
|
||||
};
|
||||
};
|
|
@ -0,0 +1,273 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals
|
||||
*
|
||||
* Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
|
||||
*/
|
||||
|
||||
&cbass_mcu_wakeup {
|
||||
dmsc: dmsc@44083000 {
|
||||
compatible = "ti,k2g-sci";
|
||||
ti,host-id = <12>;
|
||||
|
||||
mbox-names = "rx", "tx";
|
||||
|
||||
mboxes= <&secure_proxy_main 11>,
|
||||
<&secure_proxy_main 13>;
|
||||
|
||||
reg-names = "debug_messages";
|
||||
reg = <0x00 0x44083000 0x00 0x1000>;
|
||||
|
||||
k3_pds: power-controller {
|
||||
compatible = "ti,sci-pm-domain";
|
||||
#power-domain-cells = <2>;
|
||||
};
|
||||
|
||||
k3_clks: clocks {
|
||||
compatible = "ti,k2g-sci-clk";
|
||||
#clock-cells = <2>;
|
||||
};
|
||||
|
||||
k3_reset: reset-controller {
|
||||
compatible = "ti,sci-reset";
|
||||
#reset-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
mcu_conf: syscon@40f00000 {
|
||||
compatible = "syscon", "simple-mfd";
|
||||
reg = <0x00 0x40f00000 0x00 0x20000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x00 0x00 0x40f00000 0x20000>;
|
||||
|
||||
phy_gmii_sel: phy@4040 {
|
||||
compatible = "ti,am654-phy-gmii-sel";
|
||||
reg = <0x4040 0x4>;
|
||||
#phy-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
chipid@43000014 {
|
||||
compatible = "ti,am654-chipid";
|
||||
reg = <0x00 0x43000014 0x00 0x4>;
|
||||
};
|
||||
|
||||
wkup_pmx0: pinctrl@4301c000 {
|
||||
compatible = "pinctrl-single";
|
||||
/* Proxy 0 addressing */
|
||||
reg = <0x00 0x4301c000 0x00 0x178>;
|
||||
#pinctrl-cells = <1>;
|
||||
pinctrl-single,register-width = <32>;
|
||||
pinctrl-single,function-mask = <0xffffffff>;
|
||||
};
|
||||
|
||||
mcu_ram: sram@41c00000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x00 0x41c00000 0x00 0x100000>;
|
||||
ranges = <0x00 0x00 0x41c00000 0x100000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
wkup_uart0: serial@42300000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x42300000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 287 2>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
mcu_uart0: serial@40a00000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x40a00000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <96000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 149 2>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
wkup_gpio_intr: interrupt-controller2 {
|
||||
compatible = "ti,sci-intr";
|
||||
ti,intr-trigger-type = <1>;
|
||||
interrupt-controller;
|
||||
interrupt-parent = <&gic500>;
|
||||
#interrupt-cells = <1>;
|
||||
ti,sci = <&dmsc>;
|
||||
ti,sci-dev-id = <137>;
|
||||
ti,interrupt-ranges = <16 960 16>;
|
||||
};
|
||||
|
||||
mcu_navss: bus@28380000 {
|
||||
compatible = "simple-mfd";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
|
||||
dma-coherent;
|
||||
dma-ranges;
|
||||
ti,sci-dev-id = <232>;
|
||||
|
||||
mcu_ringacc: ringacc@2b800000 {
|
||||
compatible = "ti,am654-navss-ringacc";
|
||||
reg = <0x00 0x2b800000 0x00 0x400000>,
|
||||
<0x00 0x2b000000 0x00 0x400000>,
|
||||
<0x00 0x28590000 0x00 0x100>,
|
||||
<0x00 0x2a500000 0x00 0x40000>;
|
||||
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
|
||||
ti,num-rings = <286>;
|
||||
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
|
||||
ti,sci = <&dmsc>;
|
||||
ti,sci-dev-id = <235>;
|
||||
msi-parent = <&main_udmass_inta>;
|
||||
};
|
||||
|
||||
mcu_udmap: dma-controller@285c0000 {
|
||||
compatible = "ti,j721e-navss-mcu-udmap";
|
||||
reg = <0x00 0x285c0000 0x00 0x100>,
|
||||
<0x00 0x2a800000 0x00 0x40000>,
|
||||
<0x00 0x2aa00000 0x00 0x40000>;
|
||||
reg-names = "gcfg", "rchanrt", "tchanrt";
|
||||
msi-parent = <&main_udmass_inta>;
|
||||
#dma-cells = <1>;
|
||||
|
||||
ti,sci = <&dmsc>;
|
||||
ti,sci-dev-id = <236>;
|
||||
ti,ringacc = <&mcu_ringacc>;
|
||||
|
||||
ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
|
||||
<0x0f>; /* TX_HCHAN */
|
||||
ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
|
||||
<0x0b>; /* RX_HCHAN */
|
||||
ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
|
||||
};
|
||||
};
|
||||
|
||||
mcu_cpsw: ethernet@46000000 {
|
||||
compatible = "ti,j721e-cpsw-nuss";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
reg = <0x00 0x46000000 0x00 0x200000>;
|
||||
reg-names = "cpsw_nuss";
|
||||
ranges = <0x00 0x00 0x00 0x46000000 0x00 0x200000>;
|
||||
dma-coherent;
|
||||
clocks = <&k3_clks 18 21>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>;
|
||||
|
||||
dmas = <&mcu_udmap 0xf000>,
|
||||
<&mcu_udmap 0xf001>,
|
||||
<&mcu_udmap 0xf002>,
|
||||
<&mcu_udmap 0xf003>,
|
||||
<&mcu_udmap 0xf004>,
|
||||
<&mcu_udmap 0xf005>,
|
||||
<&mcu_udmap 0xf006>,
|
||||
<&mcu_udmap 0xf007>,
|
||||
<&mcu_udmap 0x7000>;
|
||||
dma-names = "tx0", "tx1", "tx2", "tx3",
|
||||
"tx4", "tx5", "tx6", "tx7",
|
||||
"rx";
|
||||
|
||||
ethernet-ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpsw_port1: port@1 {
|
||||
reg = <1>;
|
||||
ti,mac-only;
|
||||
label = "port1";
|
||||
ti,syscon-efuse = <&mcu_conf 0x200>;
|
||||
phys = <&phy_gmii_sel 1>;
|
||||
};
|
||||
};
|
||||
|
||||
davinci_mdio: mdio@f00 {
|
||||
compatible = "ti,cpsw-mdio","ti,davinci_mdio";
|
||||
reg = <0x00 0xf00 0x00 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&k3_clks 18 21>;
|
||||
clock-names = "fck";
|
||||
bus_freq = <1000000>;
|
||||
};
|
||||
|
||||
cpts@3d000 {
|
||||
compatible = "ti,am65-cpts";
|
||||
reg = <0x00 0x3d000 0x00 0x400>;
|
||||
clocks = <&k3_clks 18 2>;
|
||||
clock-names = "cpts";
|
||||
interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "cpts";
|
||||
ti,cpts-ext-ts-inputs = <4>;
|
||||
ti,cpts-periodic-outputs = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
mcu_i2c0: i2c@40b00000 {
|
||||
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
||||
reg = <0x00 0x40b00000 0x00 0x100>;
|
||||
interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-names = "fck";
|
||||
clocks = <&k3_clks 194 1>;
|
||||
power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
|
||||
};
|
||||
|
||||
mcu_i2c1: i2c@40b10000 {
|
||||
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
||||
reg = <0x00 0x40b10000 0x00 0x100>;
|
||||
interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-names = "fck";
|
||||
clocks = <&k3_clks 195 1>;
|
||||
power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
|
||||
};
|
||||
|
||||
wkup_i2c0: i2c@42120000 {
|
||||
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
||||
reg = <0x00 0x42120000 0x00 0x100>;
|
||||
interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-names = "fck";
|
||||
clocks = <&k3_clks 197 1>;
|
||||
power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
|
||||
};
|
||||
|
||||
fss: syscon@47000000 {
|
||||
compatible = "syscon", "simple-mfd";
|
||||
reg = <0x00 0x47000000 0x00 0x100>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
hbmc_mux: hbmc-mux {
|
||||
compatible = "mmio-mux";
|
||||
#mux-control-cells = <1>;
|
||||
mux-reg-masks = <0x4 0x2>; /* HBMC select */
|
||||
};
|
||||
|
||||
hbmc: hyperbus@47034000 {
|
||||
compatible = "ti,am654-hbmc";
|
||||
reg = <0x00 0x47034000 0x00 0x100>,
|
||||
<0x05 0x00000000 0x01 0x0000000>;
|
||||
power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 102 0>;
|
||||
assigned-clocks = <&k3_clks 102 5>;
|
||||
assigned-clock-rates = <333333333>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
mux-controls = <&hbmc_mux 0>;
|
||||
};
|
||||
};
|
||||
};
|
|
@ -0,0 +1,65 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "k3-j7200.dtsi"
|
||||
|
||||
/ {
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
/* 4G RAM */
|
||||
reg = <0x00 0x80000000 0x00 0x80000000>,
|
||||
<0x08 0x80000000 0x00 0x80000000>;
|
||||
};
|
||||
|
||||
reserved_memory: reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
secure_ddr: optee@9e800000 {
|
||||
reg = <0x00 0x9e800000 0x00 0x01800000>;
|
||||
alignment = <0x1000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wkup_pmx0 {
|
||||
mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default {
|
||||
pinctrl-single,pins = <
|
||||
J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (B6) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */
|
||||
J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C8) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */
|
||||
J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (D6) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */
|
||||
J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (D7) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */
|
||||
J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (B7) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */
|
||||
J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D8) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */
|
||||
J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (C7) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */
|
||||
J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (C5) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */
|
||||
J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (A5) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */
|
||||
J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (A6) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */
|
||||
J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (B8) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */
|
||||
J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (A8) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */
|
||||
J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (A7) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&hbmc {
|
||||
/* OSPI and HBMC are muxed inside FSS, Bootloader will enable
|
||||
* appropriate node based on board detection
|
||||
*/
|
||||
status = "disabled";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcu_fss0_hpb0_pins_default>;
|
||||
ranges = <0x00 0x00 0x05 0x00000000 0x4000000>, /* 64MB Flash on CS0 */
|
||||
<0x01 0x00 0x05 0x04000000 0x800000>; /* 8MB RAM on CS1 */
|
||||
|
||||
flash@0,0 {
|
||||
compatible = "cypress,hyperflash", "cfi-flash";
|
||||
reg = <0x00 0x00 0x4000000>;
|
||||
};
|
||||
};
|
|
@ -0,0 +1,172 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for J7200 SoC Family
|
||||
*
|
||||
* Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/pinctrl/k3.h>
|
||||
#include <dt-bindings/soc/ti,sci_pm_domain.h>
|
||||
|
||||
/ {
|
||||
model = "Texas Instruments K3 J7200 SoC";
|
||||
compatible = "ti,j7200";
|
||||
interrupt-parent = <&gic500>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
aliases {
|
||||
serial0 = &wkup_uart0;
|
||||
serial1 = &mcu_uart0;
|
||||
serial2 = &main_uart0;
|
||||
serial3 = &main_uart1;
|
||||
serial4 = &main_uart2;
|
||||
serial5 = &main_uart3;
|
||||
serial6 = &main_uart4;
|
||||
serial7 = &main_uart5;
|
||||
serial8 = &main_uart6;
|
||||
serial9 = &main_uart7;
|
||||
serial10 = &main_uart8;
|
||||
serial11 = &main_uart9;
|
||||
};
|
||||
|
||||
chosen { };
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cpu-map {
|
||||
cluster0: cluster0 {
|
||||
core0 {
|
||||
cpu = <&cpu0>;
|
||||
};
|
||||
|
||||
core1 {
|
||||
cpu = <&cpu1>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
cpu0: cpu@0 {
|
||||
compatible = "arm,cortex-a72";
|
||||
reg = <0x000>;
|
||||
device_type = "cpu";
|
||||
enable-method = "psci";
|
||||
i-cache-size = <0xc000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <256>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <128>;
|
||||
next-level-cache = <&L2_0>;
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
compatible = "arm,cortex-a72";
|
||||
reg = <0x001>;
|
||||
device_type = "cpu";
|
||||
enable-method = "psci";
|
||||
i-cache-size = <0xc000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <256>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <128>;
|
||||
next-level-cache = <&L2_0>;
|
||||
};
|
||||
};
|
||||
|
||||
L2_0: l2-cache0 {
|
||||
compatible = "cache";
|
||||
cache-level = <2>;
|
||||
cache-size = <0x100000>;
|
||||
cache-line-size = <64>;
|
||||
cache-sets = <2048>;
|
||||
next-level-cache = <&msmc_l3>;
|
||||
};
|
||||
|
||||
msmc_l3: l3-cache0 {
|
||||
compatible = "cache";
|
||||
cache-level = <3>;
|
||||
};
|
||||
|
||||
firmware {
|
||||
optee {
|
||||
compatible = "linaro,optee-tz";
|
||||
method = "smc";
|
||||
};
|
||||
|
||||
psci: psci {
|
||||
compatible = "arm,psci-1.0";
|
||||
method = "smc";
|
||||
};
|
||||
};
|
||||
|
||||
a72_timer0: timer-cl0-cpu0 {
|
||||
compatible = "arm,armv8-timer";
|
||||
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
|
||||
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
|
||||
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
|
||||
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
|
||||
};
|
||||
|
||||
pmu: pmu {
|
||||
compatible = "arm,armv8-pmuv3";
|
||||
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
cbass_main: bus@100000 {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
|
||||
<0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
|
||||
<0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
|
||||
<0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
|
||||
<0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
|
||||
<0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
|
||||
<0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
|
||||
<0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
|
||||
|
||||
/* MCUSS_WKUP Range */
|
||||
<0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
|
||||
<0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
|
||||
<0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
|
||||
<0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
|
||||
<0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
|
||||
<0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
|
||||
<0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
|
||||
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
|
||||
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
|
||||
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
|
||||
<0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
|
||||
<0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
|
||||
<0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
|
||||
|
||||
cbass_mcu_wakeup: bus@28380000 {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
|
||||
<0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
|
||||
<0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
|
||||
<0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
|
||||
<0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
|
||||
<0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
|
||||
<0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
|
||||
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
|
||||
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
|
||||
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
|
||||
<0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
|
||||
<0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
|
||||
<0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3 */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* Now include the peripherals for each bus segments */
|
||||
#include "k3-j7200-main.dtsi"
|
||||
#include "k3-j7200-mcu-wakeup.dtsi"
|
|
@ -311,11 +311,12 @@ &usb_serdes_mux {
|
|||
};
|
||||
|
||||
&serdes_ln_ctrl {
|
||||
idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>,
|
||||
<SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>,
|
||||
<SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>,
|
||||
<SERDES3_LANE0_USB3_0_SWAP>, <SERDES3_LANE1_USB3_0>,
|
||||
<SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>;
|
||||
idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
|
||||
<J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
|
||||
<J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
|
||||
<J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
|
||||
<J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
|
||||
<J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
|
||||
};
|
||||
|
||||
&serdes_wiz3 {
|
||||
|
@ -407,7 +408,7 @@ exp2: gpio@22 {
|
|||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
p09 {
|
||||
p09-hog {
|
||||
/* P11 - MCASP/TRACE_MUX_S0 */
|
||||
gpio-hog;
|
||||
gpios = <9 GPIO_ACTIVE_HIGH>;
|
||||
|
@ -415,7 +416,7 @@ p09 {
|
|||
line-name = "MCASP/TRACE_MUX_S0";
|
||||
};
|
||||
|
||||
p10 {
|
||||
p10-hog {
|
||||
/* P12 - MCASP/TRACE_MUX_S1 */
|
||||
gpio-hog;
|
||||
gpios = <10 GPIO_ACTIVE_HIGH>;
|
||||
|
|
|
@ -6,7 +6,7 @@
|
|||
*/
|
||||
#include <dt-bindings/phy/phy.h>
|
||||
#include <dt-bindings/mux/mux.h>
|
||||
#include <dt-bindings/mux/mux-j721e-wiz.h>
|
||||
#include <dt-bindings/mux/ti-serdes.h>
|
||||
|
||||
&cbass_main {
|
||||
msmc_ram: sram@70000000 {
|
||||
|
@ -70,11 +70,12 @@ serdes_ln_ctrl: mux@4080 {
|
|||
<0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
|
||||
<0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
|
||||
/* SERDES4 lane0/1/2/3 select */
|
||||
idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>,
|
||||
<SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>,
|
||||
<SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>,
|
||||
<MUX_IDLE_AS_IS>, <SERDES3_LANE1_USB3_0>,
|
||||
<SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>;
|
||||
idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
|
||||
<J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
|
||||
<J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
|
||||
<MUX_IDLE_AS_IS>, <J721E_SERDES3_LANE1_USB3_0>,
|
||||
<J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
|
||||
<J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
|
||||
};
|
||||
|
||||
usb_serdes_mux: mux-controller@4000 {
|
||||
|
|
|
@ -1,53 +0,0 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/*
|
||||
* This header provides constants for J721E WIZ.
|
||||
*/
|
||||
|
||||
#ifndef _DT_BINDINGS_J721E_WIZ
|
||||
#define _DT_BINDINGS_J721E_WIZ
|
||||
|
||||
#define SERDES0_LANE0_QSGMII_LANE1 0x0
|
||||
#define SERDES0_LANE0_PCIE0_LANE0 0x1
|
||||
#define SERDES0_LANE0_USB3_0_SWAP 0x2
|
||||
|
||||
#define SERDES0_LANE1_QSGMII_LANE2 0x0
|
||||
#define SERDES0_LANE1_PCIE0_LANE1 0x1
|
||||
#define SERDES0_LANE1_USB3_0 0x2
|
||||
|
||||
#define SERDES1_LANE0_QSGMII_LANE3 0x0
|
||||
#define SERDES1_LANE0_PCIE1_LANE0 0x1
|
||||
#define SERDES1_LANE0_USB3_1_SWAP 0x2
|
||||
#define SERDES1_LANE0_SGMII_LANE0 0x3
|
||||
|
||||
#define SERDES1_LANE1_QSGMII_LANE4 0x0
|
||||
#define SERDES1_LANE1_PCIE1_LANE1 0x1
|
||||
#define SERDES1_LANE1_USB3_1 0x2
|
||||
#define SERDES1_LANE1_SGMII_LANE1 0x3
|
||||
|
||||
#define SERDES2_LANE0_PCIE2_LANE0 0x1
|
||||
#define SERDES2_LANE0_SGMII_LANE0 0x3
|
||||
#define SERDES2_LANE0_USB3_1_SWAP 0x2
|
||||
|
||||
#define SERDES2_LANE1_PCIE2_LANE1 0x1
|
||||
#define SERDES2_LANE1_USB3_1 0x2
|
||||
#define SERDES2_LANE1_SGMII_LANE1 0x3
|
||||
|
||||
#define SERDES3_LANE0_PCIE3_LANE0 0x1
|
||||
#define SERDES3_LANE0_USB3_0_SWAP 0x2
|
||||
|
||||
#define SERDES3_LANE1_PCIE3_LANE1 0x1
|
||||
#define SERDES3_LANE1_USB3_0 0x2
|
||||
|
||||
#define SERDES4_LANE0_EDP_LANE0 0x0
|
||||
#define SERDES4_LANE0_QSGMII_LANE5 0x2
|
||||
|
||||
#define SERDES4_LANE1_EDP_LANE1 0x0
|
||||
#define SERDES4_LANE1_QSGMII_LANE6 0x2
|
||||
|
||||
#define SERDES4_LANE2_EDP_LANE2 0x0
|
||||
#define SERDES4_LANE2_QSGMII_LANE7 0x2
|
||||
|
||||
#define SERDES4_LANE3_EDP_LANE3 0x0
|
||||
#define SERDES4_LANE3_QSGMII_LANE8 0x2
|
||||
|
||||
#endif /* _DT_BINDINGS_J721E_WIZ */
|
|
@ -0,0 +1,93 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/*
|
||||
* This header provides constants for SERDES MUX for TI SoCs
|
||||
*/
|
||||
|
||||
#ifndef _DT_BINDINGS_MUX_TI_SERDES
|
||||
#define _DT_BINDINGS_MUX_TI_SERDES
|
||||
|
||||
/* J721E */
|
||||
|
||||
#define J721E_SERDES0_LANE0_QSGMII_LANE1 0x0
|
||||
#define J721E_SERDES0_LANE0_PCIE0_LANE0 0x1
|
||||
#define J721E_SERDES0_LANE0_USB3_0_SWAP 0x2
|
||||
#define J721E_SERDES0_LANE0_IP4_UNUSED 0x3
|
||||
|
||||
#define J721E_SERDES0_LANE1_QSGMII_LANE2 0x0
|
||||
#define J721E_SERDES0_LANE1_PCIE0_LANE1 0x1
|
||||
#define J721E_SERDES0_LANE1_USB3_0 0x2
|
||||
#define J721E_SERDES0_LANE1_IP4_UNUSED 0x3
|
||||
|
||||
#define J721E_SERDES1_LANE0_QSGMII_LANE3 0x0
|
||||
#define J721E_SERDES1_LANE0_PCIE1_LANE0 0x1
|
||||
#define J721E_SERDES1_LANE0_USB3_1_SWAP 0x2
|
||||
#define J721E_SERDES1_LANE0_SGMII_LANE0 0x3
|
||||
|
||||
#define J721E_SERDES1_LANE1_QSGMII_LANE4 0x0
|
||||
#define J721E_SERDES1_LANE1_PCIE1_LANE1 0x1
|
||||
#define J721E_SERDES1_LANE1_USB3_1 0x2
|
||||
#define J721E_SERDES1_LANE1_SGMII_LANE1 0x3
|
||||
|
||||
#define J721E_SERDES2_LANE0_IP1_UNUSED 0x0
|
||||
#define J721E_SERDES2_LANE0_PCIE2_LANE0 0x1
|
||||
#define J721E_SERDES2_LANE0_USB3_1_SWAP 0x2
|
||||
#define J721E_SERDES2_LANE0_SGMII_LANE0 0x3
|
||||
|
||||
#define J721E_SERDES2_LANE1_IP1_UNUSED 0x0
|
||||
#define J721E_SERDES2_LANE1_PCIE2_LANE1 0x1
|
||||
#define J721E_SERDES2_LANE1_USB3_1 0x2
|
||||
#define J721E_SERDES2_LANE1_SGMII_LANE1 0x3
|
||||
|
||||
#define J721E_SERDES3_LANE0_IP1_UNUSED 0x0
|
||||
#define J721E_SERDES3_LANE0_PCIE3_LANE0 0x1
|
||||
#define J721E_SERDES3_LANE0_USB3_0_SWAP 0x2
|
||||
#define J721E_SERDES3_LANE0_IP4_UNUSED 0x3
|
||||
|
||||
#define J721E_SERDES3_LANE1_IP1_UNUSED 0x0
|
||||
#define J721E_SERDES3_LANE1_PCIE3_LANE1 0x1
|
||||
#define J721E_SERDES3_LANE1_USB3_0 0x2
|
||||
#define J721E_SERDES3_LANE1_IP4_UNUSED 0x3
|
||||
|
||||
#define J721E_SERDES4_LANE0_EDP_LANE0 0x0
|
||||
#define J721E_SERDES4_LANE0_IP2_UNUSED 0x1
|
||||
#define J721E_SERDES4_LANE0_QSGMII_LANE5 0x2
|
||||
#define J721E_SERDES4_LANE0_IP4_UNUSED 0x3
|
||||
|
||||
#define J721E_SERDES4_LANE1_EDP_LANE1 0x0
|
||||
#define J721E_SERDES4_LANE1_IP2_UNUSED 0x1
|
||||
#define J721E_SERDES4_LANE1_QSGMII_LANE6 0x2
|
||||
#define J721E_SERDES4_LANE1_IP4_UNUSED 0x3
|
||||
|
||||
#define J721E_SERDES4_LANE2_EDP_LANE2 0x0
|
||||
#define J721E_SERDES4_LANE2_IP2_UNUSED 0x1
|
||||
#define J721E_SERDES4_LANE2_QSGMII_LANE7 0x2
|
||||
#define J721E_SERDES4_LANE2_IP4_UNUSED 0x3
|
||||
|
||||
#define J721E_SERDES4_LANE3_EDP_LANE3 0x0
|
||||
#define J721E_SERDES4_LANE3_IP2_UNUSED 0x1
|
||||
#define J721E_SERDES4_LANE3_QSGMII_LANE8 0x2
|
||||
#define J721E_SERDES4_LANE3_IP4_UNUSED 0x3
|
||||
|
||||
/* J7200 */
|
||||
|
||||
#define J7200_SERDES0_LANE0_QSGMII_LANE3 0x0
|
||||
#define J7200_SERDES0_LANE0_PCIE1_LANE0 0x1
|
||||
#define J7200_SERDES0_LANE0_IP3_UNUSED 0x2
|
||||
#define J7200_SERDES0_LANE0_IP4_UNUSED 0x3
|
||||
|
||||
#define J7200_SERDES0_LANE1_QSGMII_LANE4 0x0
|
||||
#define J7200_SERDES0_LANE1_PCIE1_LANE1 0x1
|
||||
#define J7200_SERDES0_LANE1_IP3_UNUSED 0x2
|
||||
#define J7200_SERDES0_LANE1_IP4_UNUSED 0x3
|
||||
|
||||
#define J7200_SERDES0_LANE2_QSGMII_LANE1 0x0
|
||||
#define J7200_SERDES0_LANE2_PCIE1_LANE2 0x1
|
||||
#define J7200_SERDES0_LANE2_IP3_UNUSED 0x2
|
||||
#define J7200_SERDES0_LANE2_IP4_UNUSED 0x3
|
||||
|
||||
#define J7200_SERDES0_LANE3_QSGMII_LANE2 0x0
|
||||
#define J7200_SERDES0_LANE3_PCIE1_LANE3 0x1
|
||||
#define J7200_SERDES0_LANE3_USB 0x2
|
||||
#define J7200_SERDES0_LANE3_IP4_UNUSED 0x3
|
||||
|
||||
#endif /* _DT_BINDINGS_MUX_TI_SERDES */
|
Loading…
Reference in New Issue