ARM: dts: at91: move isi definition to at91sam9g25ek

The ISI is only present on the at91sam9g25, move the definition to the
at91sam9g25ek board dts to avoid warnings.

Solves the following warning for other 9x5ek boards:
Warning (unit_address_vs_reg): Node /ahb/apb/isi@f8048000 has a unit name, but no reg property

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This commit is contained in:
Alexandre Belloni 2016-07-14 16:50:17 +02:00
parent e152e3f7f4
commit efedc4893b
2 changed files with 25 additions and 33 deletions

View File

@ -26,7 +26,24 @@ mmc1: mmc@f000c000 {
i2c0: i2c@f8010000 {
ov2640: camera@0x30 {
compatible = "ovti,ov2640";
reg = <0x30>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
clocks = <&pck0>;
clock-names = "xvclk";
assigned-clocks = <&pck0>;
assigned-clock-rates = <25000000>;
status = "okay";
port {
ov2640_0: endpoint {
remote-endpoint = <&isi_0>;
bus-width = <8>;
};
};
};
};
@ -37,6 +54,14 @@ macb0: ethernet@f802c000 {
isi: isi@f8048000 {
status = "okay";
port {
isi_0: endpoint@0 {
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
vsync-active = <1>;
hsync-active = <1>;
};
};
};
};
};

View File

@ -60,18 +60,6 @@ usb2: gadget@f803c000 {
status = "okay";
};
isi: isi@f8048000 {
status = "disabled";
port {
isi_0: endpoint@0 {
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
vsync-active = <1>;
hsync-active = <1>;
};
};
};
i2c0: i2c@f8010000 {
status = "okay";
@ -79,27 +67,6 @@ wm8731: wm8731@1a {
compatible = "wm8731";
reg = <0x1a>;
};
ov2640: camera@0x30 {
compatible = "ovti,ov2640";
reg = <0x30>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
clocks = <&pck0>;
clock-names = "xvclk";
assigned-clocks = <&pck0>;
assigned-clock-rates = <25000000>;
status = "disabled";
port {
ov2640_0: endpoint {
remote-endpoint = <&isi_0>;
bus-width = <8>;
};
};
};
};
adc0: adc@f804c000 {