arm64: dts: Amlogic updates for v5.4 (round 2)

- new board: Khadas VIM3L (SM1/S905D3 SoC)
 - support power domains on G12[AB] and SM1 SoCs
 - DT binding fixups based on YAML schema
 - add a bunch of remote control keymap
 - enable DVFS on SM1/SEI610 board
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl1oX4gACgkQWTcYmtP7
 xmVgmA//bj9MUuKJYgXJ6ZSdtSFK7tL3MwqMmwJpt8PPRt+KTUEr3x6Ix+ZvkpYB
 YsiUYvA0URIL5gcibsIP6UsO6c0QAwnW6NaWGl96cHPwGAB6cBdWY5msxHEC6KaN
 GzBOjlsTTv1gFptz9vLd8RvEXeH/M92pdIwWQrIE1c9LXKfLoLhC5dHlw9iHG7kN
 ja7Qsv9J3GkuTPYoPh04X2q44NPGwUtxhMNqGbn9S9T5YCqXkKa4RWgyvs/Iam72
 hs/humUMdlciH4pSFikKQd0Xouf2cYnEIsVqWFuHFgDs5KuYrSlOAutVgkcFOcnb
 bG61iKV5urue0sxnar8Fx0OR6aeT04A9zGHWEPH6Tq2kfl5VQNZUKZb5XUZJWgWe
 vj0kTG6L7wk5oem19TtHOTZTpwRTdk3Bkth+dt9RZtmVC/HL1C79Fkt1BKpCYesQ
 7tsUmNnTprz0unUQIbY6UMfzpD8JixGM/ak5ODJ+pQivFlbgu/eQTDNRAOsEjszn
 w7AZtyp2AANJN/u5Vxf8IqonOzF1UhMyrIa39D6vAQn0xfCMlFh0RcV5Afs4qows
 GRJ17JMVL7da/cbyoG17gCyQSYYTWPkPIbqOEyUOTqOzEGVgHweNsBOWBkEwolNv
 v0+rIJHjw11527ibqdBxMIKIrSIfhN63j343zN0RrwMdZbHroJg=
 =7yjy
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt64-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.4 (round 2)
- new board: Khadas VIM3L (SM1/S905D3 SoC)
- support power domains on G12[AB] and SM1 SoCs
- DT binding fixups based on YAML schema
- add a bunch of remote control keymap
- enable DVFS on SM1/SEI610 board

* tag 'amlogic-dt64-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (44 commits)
  arm64: dts: meson-sm1-sei610: add stdout-path property back
  arm64: dts: meson-sm1-sei610: enable DVFS
  arm64: dts: khadas-vim3: add support for the SM1 based VIM3L
  dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings
  arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi
  arm64: dts: meson: g12a: add reset to tdm formatters
  arm64: dts: meson: g12a: audio clock controller provides resets
  arm64: dts: meson-sm1-sei610: enable DVFS
  arm64: dts: meson-gxm-khadas-vim2: use rc-khadas keymap
  arm64: dts: meson-gxl-s905w-tx3-mini: add rc-tx3mini keymap
  arm64: dts: meson-gxl-s905x-khadas-vim: use rc-khadas keymap
  arm64: dts: meson-gxbb-wetek-play2: add rc-wetek-play2 keymap
  arm64: dts: meson-gxbb-wetek-hub: add rc-wetek-hub keymap
  arm64: dts: meson-g12a-x96-max: add rc-x96max keymap
  arm64: dts: meson-g12b-odroid-n2: add rc-odroid keymap
  arm64: dts: meson-sm1-sei610: add USB support
  arm64: dts: meson-sm1-sei610: add HDMI display support
  arm64: dts: meson-g12: add Everything-Else power domain controller
  arm64: dts: meson: fix boards regulators states format
  arm64: dts: meson-gxbb-p201: fix snps, reset-delays-us format
  ...

Link: https://patchwork.kernel.org/patch/11122331/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/amlogic.yaml

@@ -150,9 +150,10 @@ properties:
           - const: amlogic,s922x
           - const: amlogic,g12b
 
-      - description: Boards with the Amlogic Meson SM1 S905X3 SoC
+      - description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC
         items:
           - enum:
               - seirobotics,sei610
+              - khadas,vim3l
           - const: amlogic,sm1
 ...

Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt

@@ -22,6 +22,7 @@ Required Properties:
 				       components.
 - resets	: phandle of the internal reset line
 - #clock-cells	: should be 1.
+- #reset-cells  : should be 1 on the g12a (and following) soc family
 
 Each clock is assigned an identifier and client nodes can use this identifier
 to specify the clock which they consume. All available clocks are defined as

Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt

@@ -11,6 +11,7 @@ Required Properties:
 		"amlogic,axg-clkc" for AXG SoC.
 		"amlogic,g12a-clkc" for G12A SoC.
 		"amlogic,g12b-clkc" for G12B SoC.
+		"amlogic,sm1-clkc" for SM1 SoC.
 - clocks : list of clock phandle, one for each entry clock-names.
 - clock-names : should contain the following:
   * "xtal": the platform xtal

Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml

@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/amlogic,meson-ee-pwrc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson Everything-Else Power Domains
+
+maintainers:
+  - Neil Armstrong <narmstrong@baylibre.com>
+
+description: |+
+  The Everything-Else Power Domains node should be the child of a syscon
+  node with the required property:
+
+  - compatible: Should be the following:
+                "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
+
+  Refer to the the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.txt
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-g12a-pwrc
+      - amlogic,meson-sm1-pwrc
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: vpu
+      - const: vapb
+
+  resets:
+    minItems: 11
+
+  reset-names:
+    items:
+      - const: viu
+      - const: venc
+      - const: vcbus
+      - const: bt656
+      - const: rdma
+      - const: venci
+      - const: vencp
+      - const: vdac
+      - const: vdi6
+      - const: vencl
+      - const: vid_lock
+
+  "#power-domain-cells":
+    const: 1
+
+  amlogic,ao-sysctrl:
+    description: phandle to the AO sysctrl node
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - "#power-domain-cells"
+  - amlogic,ao-sysctrl
+
+examples:
+  - |
+    pwrc: power-controller {
+          compatible = "amlogic,meson-sm1-pwrc";
+          #power-domain-cells = <1>;
+          amlogic,ao-sysctrl = <&rti>;
+          resets = <&reset_viu>,
+                   <&reset_venc>,
+                   <&reset_vcbus>,
+                   <&reset_bt656>,
+                   <&reset_rdma>,
+                   <&reset_venci>,
+                   <&reset_vencp>,
+                   <&reset_vdac>,
+                   <&reset_vdi6>,
+                   <&reset_vencl>,
+                   <&reset_vid_lock>;
+          reset-names = "viu", "venc", "vcbus", "bt656",
+                        "rdma", "venci", "vencp", "vdac",
+                        "vdi6", "vencl", "vid_lock";
+          clocks = <&clk_vpu>, <&clk_vapb>;
+          clock-names = "vpu", "vapb";
+    };

Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt

@@ -11,6 +11,7 @@ Required properties:
 			"amlogic,meson8b-clk-measure" for Meson8b SoCs
 			"amlogic,meson-axg-clk-measure" for AXG SoCs
 			"amlogic,meson-g12a-clk-measure" for G12a SoCs
+			"amlogic,meson-sm1-clk-measure" for SM1 SoCs
 - reg: base address and size of the Clock Measurer register space.
 
 Example:

arch/arm64/boot/dts/amlogic/Makefile

@@ -35,3 +35,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb

arch/arm64/boot/dts/amlogic/meson-axg.dtsi

@@ -174,8 +174,8 @@ ethmac: ethernet@ff3f0000 {
 			compatible = "amlogic,meson-axg-dwmac",
 				     "snps,dwmac-3.70a",
 				     "snps,dwmac";
-			reg = <0x0 0xff3f0000 0x0 0x10000
+			reg = <0x0 0xff3f0000 0x0 0x10000>,
-			       0x0 0xff634540 0x0 0x8>;
+			      <0x0 0xff634540 0x0 0x8>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			clocks = <&clkc CLKID_ETH>,
@@ -1118,7 +1118,7 @@ clkc: clock-controller {
 		};
 
 		mailbox: mailbox@ff63c404 {
-			compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
+			compatible = "amlogic,meson-gxbb-mhu";
 			reg = <0 0xff63c404 0 0x4c>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,

arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi

@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
+#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
 #include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
 
 / {
@@ -98,8 +99,8 @@ ethmac: ethernet@ff3f0000 {
 			compatible = "amlogic,meson-axg-dwmac",
 				     "snps,dwmac-3.70a",
 				     "snps,dwmac";
-			reg = <0x0 0xff3f0000 0x0 0x10000
+			reg = <0x0 0xff3f0000 0x0 0x10000>,
-			       0x0 0xff634540 0x0 0x8>;
+			      <0x0 0xff634540 0x0 0x8>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			clocks = <&clkc CLKID_ETH>,
@@ -1406,6 +1407,53 @@ clkc: clock-controller {
 						clocks = <&xtal>;
 						clock-names = "xtal";
 					};
+
+					pwrc: power-controller {
+						compatible = "amlogic,meson-g12a-pwrc";
+						#power-domain-cells = <1>;
+						amlogic,ao-sysctrl = <&rti>;
+						resets = <&reset RESET_VIU>,
+							 <&reset RESET_VENC>,
+							 <&reset RESET_VCBUS>,
+							 <&reset RESET_BT656>,
+							 <&reset RESET_RDMA>,
+							 <&reset RESET_VENCI>,
+							 <&reset RESET_VENCP>,
+							 <&reset RESET_VDAC>,
+							 <&reset RESET_VDI6>,
+							 <&reset RESET_VENCL>,
+							 <&reset RESET_VID_LOCK>;
+						reset-names = "viu", "venc", "vcbus", "bt656",
+							      "rdma", "venci", "vencp", "vdac",
+							      "vdi6", "vencl", "vid_lock";
+						clocks = <&clkc CLKID_VPU>,
+							 <&clkc CLKID_VAPB>;
+						clock-names = "vpu", "vapb";
+						/*
+						 * VPU clocking is provided by two identical clock paths
+						 * VPU_0 and VPU_1 muxed to a single clock by a glitch
+						 * free mux to safely change frequency while running.
+						 * Same for VAPB but with a final gate after the glitch free mux.
+						 */
+						assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+								  <&clkc CLKID_VPU_0>,
+								  <&clkc CLKID_VPU>, /* Glitch free mux */
+								  <&clkc CLKID_VAPB_0_SEL>,
+								  <&clkc CLKID_VAPB_0>,
+								  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+						assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+									 <0>, /* Do Nothing */
+									 <&clkc CLKID_VPU_0>,
+									 <&clkc CLKID_FCLK_DIV4>,
+									 <0>, /* Do Nothing */
+									 <&clkc CLKID_VAPB_0>;
+						assigned-clock-rates = <0>, /* Do Nothing */
+								       <666666666>,
+								       <0>, /* Do Nothing */
+								       <0>, /* Do Nothing */
+								       <250000000>,
+								       <0>; /* Do Nothing */
+					};
 				};
 			};
 
@@ -1434,6 +1482,7 @@ clkc_audio: clock-controller@0 {
 					compatible = "amlogic,g12a-audio-clkc";
 					reg = <0x0 0x0 0x0 0xb4>;
 					#clock-cells = <1>;
+					#reset-cells = <1>;
 
 					clocks = <&clkc CLKID_AUDIO>,
 						 <&clkc CLKID_MPLL0>,
@@ -1542,6 +1591,7 @@ tdmin_a: audio-controller@300 {
 						     "amlogic,axg-tdmin";
 					reg = <0x0 0x300 0x0 0x40>;
 					sound-name-prefix = "TDMIN_A";
+					resets = <&clkc_audio AUD_RESET_TDMIN_A>;
 					clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
 						 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
 						 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
@@ -1557,6 +1607,7 @@ tdmin_b: audio-controller@340 {
 						     "amlogic,axg-tdmin";
 					reg = <0x0 0x340 0x0 0x40>;
 					sound-name-prefix = "TDMIN_B";
+					resets = <&clkc_audio AUD_RESET_TDMIN_B>;
 					clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
 						 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
 						 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
@@ -1572,6 +1623,7 @@ tdmin_c: audio-controller@380 {
 						     "amlogic,axg-tdmin";
 					reg = <0x0 0x380 0x0 0x40>;
 					sound-name-prefix = "TDMIN_C";
+					resets = <&clkc_audio AUD_RESET_TDMIN_C>;
 					clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
 						 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
 						 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
@@ -1587,6 +1639,7 @@ tdmin_lb: audio-controller@3c0 {
 						     "amlogic,axg-tdmin";
 					reg = <0x0 0x3c0 0x0 0x40>;
 					sound-name-prefix = "TDMIN_LB";
+					resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
 					clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
 						 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
 						 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
@@ -1626,6 +1679,7 @@ tdmout_a: audio-controller@500 {
 					compatible = "amlogic,g12a-tdmout";
 					reg = <0x0 0x500 0x0 0x40>;
 					sound-name-prefix = "TDMOUT_A";
+					resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
 					clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
 						 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
 						 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
@@ -1640,6 +1694,7 @@ tdmout_b: audio-controller@540 {
 					compatible = "amlogic,g12a-tdmout";
 					reg = <0x0 0x540 0x0 0x40>;
 					sound-name-prefix = "TDMOUT_B";
+					resets = <&clkc_audio AUD_RESET_TDMOUT_B>;
 					clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
 						 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
 						 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
@@ -1654,6 +1709,7 @@ tdmout_c: audio-controller@580 {
 					compatible = "amlogic,g12a-tdmout";
 					reg = <0x0 0x580 0x0 0x40>;
 					sound-name-prefix = "TDMOUT_C";
+					resets = <&clkc_audio AUD_RESET_TDMOUT_C>;
 					clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
 						 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
 						 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
@@ -1753,50 +1809,6 @@ clkc_AO: clock-controller {
 					clock-names = "xtal", "mpeg-clk";
 				};
 
-				pwrc_vpu: power-controller-vpu {
-					compatible = "amlogic,meson-g12a-pwrc-vpu";
-					#power-domain-cells = <0>;
-					amlogic,hhi-sysctrl = <&hhi>;
-					resets = <&reset RESET_VIU>,
-						 <&reset RESET_VENC>,
-						 <&reset RESET_VCBUS>,
-						 <&reset RESET_BT656>,
-						 <&reset RESET_RDMA>,
-						 <&reset RESET_VENCI>,
-						 <&reset RESET_VENCP>,
-						 <&reset RESET_VDAC>,
-						 <&reset RESET_VDI6>,
-						 <&reset RESET_VENCL>,
-						 <&reset RESET_VID_LOCK>;
-					clocks = <&clkc CLKID_VPU>,
-						 <&clkc CLKID_VAPB>;
-					clock-names = "vpu", "vapb";
-					/*
-					 * VPU clocking is provided by two identical clock paths
-					 * VPU_0 and VPU_1 muxed to a single clock by a glitch
-					 * free mux to safely change frequency while running.
-					 * Same for VAPB but with a final gate after the glitch free mux.
-					 */
-					assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
-							  <&clkc CLKID_VPU_0>,
-							  <&clkc CLKID_VPU>, /* Glitch free mux */
-							  <&clkc CLKID_VAPB_0_SEL>,
-							  <&clkc CLKID_VAPB_0>,
-							  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
-					assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
-								 <0>, /* Do Nothing */
-								 <&clkc CLKID_VPU_0>,
-								 <&clkc CLKID_FCLK_DIV4>,
-								 <0>, /* Do Nothing */
-								 <&clkc CLKID_VAPB_0>;
-					assigned-clock-rates = <0>, /* Do Nothing */
-							       <666666666>,
-							       <0>, /* Do Nothing */
-							       <0>, /* Do Nothing */
-							       <250000000>,
-							       <0>; /* Do Nothing */
-				};
-
 				ao_pinctrl: pinctrl@14 {
 					compatible = "amlogic,meson-g12a-aobus-pinctrl";
 					#address-cells = <2>;
@@ -2045,6 +2057,11 @@ mux {
 				};
 			};
 
+			vrtc: rtc@0a8 {
+				compatible = "amlogic,meson-vrtc";
+				reg = <0x0 0x000a8 0x0 0x4>;
+			};
+
 			cec_AO: cec@100 {
 				compatible = "amlogic,meson-gx-ao-cec";
 				reg = <0x0 0x00100 0x0 0x14>;
@@ -2144,7 +2161,6 @@ vpu: vpu@ff900000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			amlogic,canvas = <&canvas>;
-			power-domains = <&pwrc_vpu>;
 
 			/* CVBS VDAC output port */
 			cvbs_vdac_port: port@0 {
@@ -2182,8 +2198,7 @@ cbus: bus@ffd00000 {
 			ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>;
 
 			reset: reset-controller@1004 {
-				compatible = "amlogic,meson-g12a-reset",
+				compatible = "amlogic,meson-axg-reset";
-					     "amlogic,meson-axg-reset";
 				reg = <0x0 0x1004 0x0 0x9c>;
 				#reset-cells = <1>;
 			};

arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts

@@ -11,7 +11,7 @@
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
-	compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a";
+	compatible = "amediatech,x96-max", "amlogic,g12a";
 	model = "Shenzhen Amediatech Technology Co., Ltd X96 Max";
 
 	aliases {
@@ -321,6 +321,7 @@ &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
+	linux,rc-map-name = "rc-x96max";
 };
 
 &pwm_AO_cd {

arch/arm64/boot/dts/amlogic/meson-g12a.dtsi

@@ -4,6 +4,7 @@
  */
 
 #include "meson-g12-common.dtsi"
+#include <dt-bindings/power/meson-g12a-power.h>
 
 / {
 	compatible = "amlogic,g12a";
@@ -110,6 +111,14 @@ opp-1800000000 {
 	};
 };
 
+&ethmac {
+	power-domains = <&pwrc PWRC_G12A_ETH_ID>;
+};
+
+&vpu {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
 &sd_emmc_a {
 	amlogic,dram-access-quirk;
 };

arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts

@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "meson-g12b-a311d.dtsi"
+#include "meson-khadas-vim3.dtsi"
 #include "meson-g12b-khadas-vim3.dtsi"
 
 / {

arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi

@@ -5,116 +5,9 @@
  * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
  */
 
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
-	model = "Khadas VIM3";
-
-	aliases {
-		serial0 = &uart_AO;
-		ethernet0 = &ethmac;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x80000000>;
-	};
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 2>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1710000>;
-
-		button-function {
-			label = "Function";
-			linux,code = <KEY_FN>;
-			press-threshold-microvolt = <10000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		white {
-			label = "vim3:white:sys";
-			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		red {
-			label = "vim3:red";
-			gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		power-button {
-			label = "power";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
-		clocks = <&wifi32k>;
-		clock-names = "ext_clock";
-	};
-
-	dc_in: regulator-dc_in {
-		compatible = "regulator-fixed";
-		regulator-name = "DC_IN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	vcc_5v: regulator-vcc_5v {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_in>;
-
-		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
-		enable-active-high;
-	};
-
-	vcc_1v8: regulator-vcc_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_3v3>;
-		regulator-always-on;
-	};
-
-	vcc_3v3: regulator-vcc_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vsys_3v3>;
-		regulator-always-on;
-		/* FIXME: actually controlled by VDDCPU_B_EN */
-	};
-
 	vddcpu_a: regulator-vddcpu-a {
 		/*
 		 * MP8756GD Regulator.
@@ -153,62 +46,6 @@ vddcpu_b: regulator-vddcpu-b {
 		regulator-always-on;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vsys_3v3>;
-		regulator-always-on;
-	};
-
-	emmc_1v8: regulator-emmc_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "EMMC_AO1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_3v3>;
-		regulator-always-on;
-	};
-
-	vsys_3v3: regulator-vsys_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VSYS_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_in>;
-		regulator-always-on;
-	};
-
-	usb_pwr: regulator-usb_pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "USB_PWR";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc_5v>;
-
-		gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_tx_tmds_out>;
-			};
-		};
-	};
-
-	wifi32k: wifi32k {
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
-	};
-
 	sound {
 		compatible = "amlogic,axg-sound-card";
 		model = "G12A-KHADAS-VIM3";
@@ -269,20 +106,6 @@ &arb {
 	status = "okay";
 };
 
-&cec_AO {
-	pinctrl-0 = <&cec_ao_a_h_pins>;
-	pinctrl-names = "default";
-	status = "disabled";
-	hdmi-phandle = <&hdmi_tx>;
-};
-
-&cecb_AO {
-	pinctrl-0 = <&cec_ao_b_h_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	hdmi-phandle = <&hdmi_tx>;
-};
-
 &clkc_audio {
 	status = "okay";
 };
@@ -329,31 +152,6 @@ &cpu103 {
 	clock-latency = <50000>;
 };
 
-&ext_mdio {
-	external_phy: ethernet-phy@0 {
-		/* Realtek RTL8211F (0x001cc916) */
-		reg = <0>;
-		max-speed = <1000>;
-
-		interrupt-parent = <&gpio_intc>;
-		/* MAC_INTR on GPIOZ_14 */
-		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&ethmac {
-        pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
-        pinctrl-names = "default";
-        status = "okay";
-        phy-mode = "rgmii";
-        phy-handle = <&external_phy>;
-        amlogic,tx-delay-ns = <2>;
-};
-
-&frddr_a {
-	status = "okay";
-};
-
 &frddr_b {
 	status = "okay";
 };
@@ -362,46 +160,6 @@ &frddr_c {
 	status = "okay";
 };
 
-&hdmi_tx {
-	status = "okay";
-	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
-	pinctrl-names = "default";
-	hdmi-supply = <&vcc_5v>;
-};
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};
-
-&i2c_AO {
-	status = "okay";
-	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
-	pinctrl-names = "default";
-
-	gpio_expander: gpio-controller@20 {
-		compatible = "ti,tca6408";
-		reg = <0x20>;
-		vcc-supply = <&vcc_3v3>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	rtc@51 {
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-		#clock-cells = <0>;
-	};
-};
-
-&ir {
-	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
-	pinctrl-names = "default";
-	linux,rc-map-name = "rc-khadas";
-};
-
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
@@ -418,81 +176,6 @@ &pwm_AO_cd {
 	status = "okay";
 };
 
-&pwm_ef {
-        status = "okay";
-        pinctrl-0 = <&pwm_e_pins>;
-        pinctrl-names = "default";
-};
-
-&saradc {
-	status = "okay";
-	vref-supply = <&vddao_1v8>;
-};
-
-/* SDIO */
-&sd_emmc_a {
-	status = "okay";
-	pinctrl-0 = <&sdio_pins>;
-	pinctrl-1 = <&sdio_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	sd-uhs-sdr50;
-	max-frequency = <100000000>;
-
-	non-removable;
-	disable-wp;
-
-	mmc-pwrseq = <&sdio_pwrseq>;
-
-	vmmc-supply = <&vsys_3v3>;
-	vqmmc-supply = <&vddao_1v8>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-/* SD card */
-&sd_emmc_b {
-	status = "okay";
-	pinctrl-0 = <&sdcard_c_pins>;
-	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <50000000>;
-	disable-wp;
-
-	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&vsys_3v3>;
-	vqmmc-supply = <&vsys_3v3>;
-};
-
-/* eMMC */
-&sd_emmc_c {
-	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
-	pinctrl-1 = <&emmc_clk_gate_pins>;
-	pinctrl-names = "default", "clk-gate";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	max-frequency = <200000000>;
-	disable-wp;
-
-	mmc-pwrseq = <&emmc_pwrseq>;
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&emmc_1v8>;
-};
-
 &tdmif_b {
 	status = "okay";
 };
@@ -504,41 +187,3 @@ &tdmout_b {
 &tohdmitx {
 	status = "okay";
 };
-
-&uart_A {
-	status = "okay";
-	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
-	pinctrl-names = "default";
-	uart-has-rtscts;
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
-		max-speed = <2000000>;
-		clocks = <&wifi32k>;
-		clock-names = "lpo";
-	};
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-&usb2_phy0 {
-	phy-supply = <&dc_in>;
-};
-
-&usb2_phy1 {
-	phy-supply = <&usb_pwr>;
-};
-
-&usb3_pcie_phy {
-	phy-supply = <&usb_pwr>;
-};
-
-&usb {
-	status = "okay";
-	dr_mode = "peripheral";
-};

arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts

@@ -66,8 +66,8 @@ tf_io: gpio-regulator-tf_io {
 		gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
 		gpios-states = <0>;
 
-		states = <3300000 0
+		states = <3300000 0>,
-			  1800000 1>;
+			 <1800000 1>;
 	};
 
 	flash_1v8: regulator-flash_1v8 {
@@ -395,6 +395,7 @@ &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
+	linux,rc-map-name = "rc-odroid";
 };
 
 &pwm_ab {

arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts

@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "meson-g12b-s922x.dtsi"
+#include "meson-khadas-vim3.dtsi"
 #include "meson-g12b-khadas-vim3.dtsi"
 
 / {

arch/arm64/boot/dts/amlogic/meson-g12b.dtsi

@@ -5,6 +5,7 @@
  */
 
 #include "meson-g12-common.dtsi"
+#include <dt-bindings/power/meson-g12a-power.h>
 
 / {
 	compatible = "amlogic,g12b";
@@ -101,6 +102,14 @@ &clkc {
 	compatible = "amlogic,g12b-clkc";
 };
 
+&ethmac {
+	power-domains = <&pwrc PWRC_G12A_ETH_ID>;
+};
+
+&vpu {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
 &sd_emmc_a {
 	amlogic,dram-access-quirk;
 };

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -220,7 +220,7 @@ gpio_intc: interrupt-controller@9880 {
 			};
 
 			reset: reset-controller@4404 {
-				compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
+				compatible = "amlogic,meson-gxbb-reset";
 				reg = <0x0 0x04404 0x0 0x9c>;
 				#reset-cells = <1>;
 			};
@@ -317,7 +317,7 @@ spicc: spi@8d80 {
 			};
 
 			spifc: spi@8c80 {
-				compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
+				compatible = "amlogic,meson-gxbb-spifc";
 				reg = <0x0 0x08c80 0x0 0x80>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -325,7 +325,7 @@ spifc: spi@8c80 {
 			};
 
 			watchdog@98d0 {
-				compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
+				compatible = "amlogic,meson-gxbb-wdt";
 				reg = <0x0 0x098d0 0x0 0x10>;
 				clocks = <&xtal>;
 			};
@@ -451,7 +451,7 @@ vdec: video-codec@c8820000 {
 			amlogic,canvas = <&canvas>;
 		};
 
-		periphs: periphs@c8834000 {
+		periphs: bus@c8834000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xc8834000 0x0 0x2000>;
 			#address-cells = <2>;
@@ -490,7 +490,7 @@ sysctrl: system-controller@0 {
 			};
 
 			mailbox: mailbox@404 {
-				compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
+				compatible = "amlogic,meson-gxbb-mhu";
 				reg = <0 0x404 0 0x4c>;
 				interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
 					     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
@@ -503,8 +503,8 @@ ethmac: ethernet@c9410000 {
 			compatible = "amlogic,meson-gxbb-dwmac",
 				     "snps,dwmac-3.70a",
 				     "snps,dwmac";
-			reg = <0x0 0xc9410000 0x0 0x10000
+			reg = <0x0 0xc9410000 0x0 0x10000>,
-			       0x0 0xc8834540 0x0 0x4>;
+			      <0x0 0xc8834540 0x0 0x4>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			rx-fifo-depth = <4096>;
@@ -544,9 +544,8 @@ sd_emmc_c: mmc@74000 {
 		vpu: vpu@d0100000 {
 			compatible = "amlogic,meson-gx-vpu";
 			reg = <0x0 0xd0100000 0x0 0x100000>,
-			      <0x0 0xc883c000 0x0 0x1000>,
+			      <0x0 0xc883c000 0x0 0x1000>;
-			      <0x0 0xc8838000 0x0 0x1000>;
+			reg-names = "vpu", "hhi";
-			reg-names = "vpu", "hhi", "dmc";
 			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts

@@ -10,6 +10,7 @@
 
 / {
 	compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
+	model = "FriendlyARM NanoPi K2";
 
 	aliases {
 		serial0 = &uart_AO;

arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts

@@ -75,8 +75,8 @@ vddio_card: gpio-regulator {
 		gpios-states = <1>;
 
 		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
-		states = <1800000 0
+		states = <1800000 0>,
-			  3300000 1>;
+			 <3300000 1>;
 	};
 
 	vddio_boot: regulator-vddio_boot {

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

@@ -77,8 +77,8 @@ tf_io: gpio-regulator-tf_io {
 		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
 		gpios-states = <0>;
 
-		states = <3300000 0
+		states = <3300000 0>,
-			  1800000 1>;
+			 <1800000 1>;
 	};
 
 	vcc1v8: regulator-vcc1v8 {

arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts

@@ -21,6 +21,6 @@ &ethmac {
 	phy-mode = "rmii";
 
 	snps,reset-gpio = <&gpio GPIOZ_14 0>;
-	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-delays-us = <0>, <10000>, <1000000>;
 	snps,reset-active-low;
 };

arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi

@@ -46,8 +46,8 @@ vddio_card: gpio-regulator {
 		gpios-states = <1>;
 
 		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
-		states = <1800000 0
+		states = <1800000 0>,
-			  3300000 1>;
+			 <3300000 1>;
 
 		regulator-settling-time-up-us = <10000>;
 		regulator-settling-time-down-us = <150000>;

arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts

@@ -12,3 +12,7 @@ / {
 	compatible = "wetek,hub", "amlogic,meson-gxbb";
 	model = "WeTek Hub";
 };
+
+&ir {
+	linux,rc-map-name = "rc-wetek-hub";
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts

@@ -54,3 +54,7 @@ &usb1_phy {
 &usb1 {
 	status = "okay";
 };
+
+&ir {
+	linux,rc-map-name = "rc-wetek-play2";
+};

arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts

@@ -20,3 +20,7 @@ memory@0 {
 		reg = <0x0 0x0 0x0 0x40000000>; /* 1 GiB or 2 GiB */
 	};
 };
+
+&ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
+};

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts

@@ -38,8 +38,8 @@ vddio_card: gpio-regulator {
 		gpios-states = <1>;
 
 		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
-		states = <1800000 0
+		states = <1800000 0>,
-			  3300000 1>;
+			 <3300000 1>;
 	};
 
 	vddio_boot: regulator-vddio_boot {

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts

@@ -110,7 +110,7 @@ rtc: rtc@51 {
 };
 
 &ir {
-	linux,rc-map-name = "rc-geekbox";
+	linux,rc-map-name = "rc-khadas";
 };
 
 &gpio_ao {

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts

@@ -38,8 +38,8 @@ vddio_card: gpio-regulator {
 		gpios-states = <1>;
 
 		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
-		states = <1800000 0
+		states = <1800000 0>,
-			  3300000 1>;
+			 <3300000 1>;
 	};
 
 	vddio_boot: regulator-vddio_boot {

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -80,9 +80,6 @@ &efuse {
 };
 
 &ethmac {
-	reg = <0x0 0xc9410000 0x0 0x10000
-	       0x0 0xc8834540 0x0 0x4>;
-
 	clocks = <&clkc CLKID_ETH>,
 		 <&clkc CLKID_FCLK_DIV2>,
 		 <&clkc CLKID_MPLL2>;
@@ -712,7 +709,7 @@ internal_mdio: mdio@e40908ff {
 			#size-cells = <0>;
 
 			internal_phy: ethernet-phy@8 {
-				compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22";
+				compatible = "ethernet-phy-id0181.4400";
 				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <8>;
 				max-speed = <100>;

arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts

@@ -299,7 +299,7 @@ &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
-	linux,rc-map-name = "rc-geekbox";
+	linux,rc-map-name = "rc-khadas";
 };
 
 &pwm_AO_ab {

arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi

@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	model = "Khadas VIM3";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		white {
+			label = "vim3:white:sys";
+			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		red {
+			label = "vim3:red";
+			gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vsys_3v3: regulator-vsys_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSYS_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+        pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+        pinctrl-names = "default";
+        status = "okay";
+        phy-mode = "rgmii";
+        phy-handle = <&external_phy>;
+        amlogic,tx-delay-ns = <2>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
+	pinctrl-names = "default";
+
+	gpio_expander: gpio-controller@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		vcc-supply = <&vcc_3v3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-khadas";
+};
+
+&pwm_ef {
+        status = "okay";
+        pinctrl-0 = <&pwm_e_pins>;
+        pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vsys_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb2_phy0 {
+	phy-supply = <&dc_in>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb3_pcie_phy {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+};

arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts

@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1.dtsi"
+#include "meson-khadas-vim3.dtsi"
+
+/ {
+	compatible = "khadas,vim3l", "amlogic,sm1";
+	model = "Khadas VIM3L";
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * Silergy SY8030DEC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&vsys_3v3>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};

arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts

@@ -51,6 +51,17 @@ key3 {
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -125,6 +136,25 @@ vddao_3v3_t: regulator-vddao_3v3_t {
 		regulator-always-on;
 	};
 
+	vddcpu: regulator-vddcpu {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1500 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vddio_ao1v8: regulator-vddio_ao1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO1V8";
@@ -171,12 +201,52 @@ &cecb_AO {
 	hdmi-phandle = <&hdmi_tx>;
 };
 
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
 &ethmac {
 	status = "okay";
 	phy-handle = <&internal_ephy>;
 	phy-mode = "rmii";
 };
 
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &i2c3 {
 	status = "okay";
 	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
@@ -197,6 +267,14 @@ &pwm_AO_ab {
 	clock-names = "clkin0";
 };
 
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
 &pwm_ef {
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
@@ -298,3 +376,8 @@ &uart_AO {
 	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+};

arch/arm64/boot/dts/amlogic/meson-sm1.dtsi

@@ -5,6 +5,7 @@
  */
 
 #include "meson-g12-common.dtsi"
+#include <dt-bindings/power/meson-sm1-power.h>
 
 / {
 	compatible = "amlogic,sm1";
@@ -49,6 +50,71 @@ l2: l2-cache0 {
 			compatible = "cache";
 		};
 	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <730000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <730000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <730000>;
+		};
+
+		opp-667000000 {
+			opp-hz = /bits/ 64 <666666666>;
+			opp-microvolt = <750000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <770000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <780000>;
+		};
+
+		opp-1404000000 {
+			opp-hz = /bits/ 64 <1404000000>;
+			opp-microvolt = <790000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <810000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <850000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <900000>;
+		};
+
+		opp-1908000000 {
+			opp-hz = /bits/ 64 <1908000000>;
+			opp-microvolt = <950000>;
+		};
+	};
 };
 
 &cecb_AO {
@@ -59,10 +125,23 @@ &clk_msr {
 	compatible = "amlogic,meson-sm1-clk-measure";
 };
 
-&pwrc_vpu {
+
-	status = "disabled";
+&clkc {
+	compatible = "amlogic,sm1-clkc";
+};
+
+&ethmac {
+	power-domains = <&pwrc PWRC_SM1_ETH_ID>;
+};
+
+&pwrc {
+	compatible = "amlogic,meson-sm1-pwrc";
 };
 
 &vpu {
-	status = "disabled";
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
+&usb {
+	power-domains = <&pwrc PWRC_SM1_USB_ID>;
 };

drivers/soc/amlogic/Kconfig

@@ -37,6 +37,17 @@ config MESON_GX_PM_DOMAINS
 	  Say yes to expose Amlogic Meson GX Power Domains as
 	  Generic Power Domains.
 
+config MESON_EE_PM_DOMAINS
+	bool "Amlogic Meson Everything-Else Power Domains driver"
+	depends on ARCH_MESON || COMPILE_TEST
+	depends on PM && OF
+	default ARCH_MESON
+	select PM_GENERIC_DOMAINS
+	select PM_GENERIC_DOMAINS_OF
+	help
+	  Say yes to expose Amlogic Meson Everything-Else Power Domains as
+	  Generic Power Domains.
+
 config MESON_MX_SOCINFO
 	bool "Amlogic Meson MX SoC Information driver"
 	depends on ARCH_MESON || COMPILE_TEST

drivers/soc/amlogic/Makefile

@@ -4,3 +4,4 @@ obj-$(CONFIG_MESON_CLK_MEASURE) += meson-clk-measure.o
 obj-$(CONFIG_MESON_GX_SOCINFO) += meson-gx-socinfo.o
 obj-$(CONFIG_MESON_GX_PM_DOMAINS) += meson-gx-pwrc-vpu.o
 obj-$(CONFIG_MESON_MX_SOCINFO) += meson-mx-socinfo.o
+obj-$(CONFIG_MESON_EE_PM_DOMAINS) += meson-ee-pwrc.o

drivers/soc/amlogic/meson-clk-measure.c

@@ -11,6 +11,8 @@
 #include <linux/debugfs.h>
 #include <linux/regmap.h>
 
+static DEFINE_MUTEX(measure_lock);
+
 #define MSR_CLK_DUTY		0x0
 #define MSR_CLK_REG0		0x4
 #define MSR_CLK_REG1		0x8
@@ -322,6 +324,8 @@ static struct meson_msr_id clk_msr_g12a[CLK_MSR_MAX] = {
 	CLK_MSR_ID(84, "co_tx"),
 	CLK_MSR_ID(89, "hdmi_todig"),
 	CLK_MSR_ID(90, "hdmitx_sys"),
+	CLK_MSR_ID(91, "sys_cpub_div16"),
+	CLK_MSR_ID(92, "sys_pll_cpub_div16"),
 	CLK_MSR_ID(94, "eth_phy_rx"),
 	CLK_MSR_ID(95, "eth_phy_pll"),
 	CLK_MSR_ID(96, "vpu_b"),
@@ -353,6 +357,136 @@ static struct meson_msr_id clk_msr_g12a[CLK_MSR_MAX] = {
 	CLK_MSR_ID(122, "audio_pdm_dclk"),
 };
 
+static struct meson_msr_id clk_msr_sm1[CLK_MSR_MAX] = {
+	CLK_MSR_ID(0, "ring_osc_out_ee_0"),
+	CLK_MSR_ID(1, "ring_osc_out_ee_1"),
+	CLK_MSR_ID(2, "ring_osc_out_ee_2"),
+	CLK_MSR_ID(3, "ring_osc_out_ee_3"),
+	CLK_MSR_ID(4, "gp0_pll"),
+	CLK_MSR_ID(5, "gp1_pll"),
+	CLK_MSR_ID(6, "enci"),
+	CLK_MSR_ID(7, "clk81"),
+	CLK_MSR_ID(8, "encp"),
+	CLK_MSR_ID(9, "encl"),
+	CLK_MSR_ID(10, "vdac"),
+	CLK_MSR_ID(11, "eth_tx"),
+	CLK_MSR_ID(12, "hifi_pll"),
+	CLK_MSR_ID(13, "mod_tcon"),
+	CLK_MSR_ID(14, "fec_0"),
+	CLK_MSR_ID(15, "fec_1"),
+	CLK_MSR_ID(16, "fec_2"),
+	CLK_MSR_ID(17, "sys_pll_div16"),
+	CLK_MSR_ID(18, "sys_cpu_div16"),
+	CLK_MSR_ID(19, "lcd_an_ph2"),
+	CLK_MSR_ID(20, "rtc_osc_out"),
+	CLK_MSR_ID(21, "lcd_an_ph3"),
+	CLK_MSR_ID(22, "eth_phy_ref"),
+	CLK_MSR_ID(23, "mpll_50m"),
+	CLK_MSR_ID(24, "eth_125m"),
+	CLK_MSR_ID(25, "eth_rmii"),
+	CLK_MSR_ID(26, "sc_int"),
+	CLK_MSR_ID(27, "in_mac"),
+	CLK_MSR_ID(28, "sar_adc"),
+	CLK_MSR_ID(29, "pcie_inp"),
+	CLK_MSR_ID(30, "pcie_inn"),
+	CLK_MSR_ID(31, "mpll_test_out"),
+	CLK_MSR_ID(32, "vdec"),
+	CLK_MSR_ID(34, "eth_mpll_50m"),
+	CLK_MSR_ID(35, "mali"),
+	CLK_MSR_ID(36, "hdmi_tx_pixel"),
+	CLK_MSR_ID(37, "cdac"),
+	CLK_MSR_ID(38, "vdin_meas"),
+	CLK_MSR_ID(39, "bt656"),
+	CLK_MSR_ID(40, "arm_ring_osc_out_4"),
+	CLK_MSR_ID(41, "eth_rx_or_rmii"),
+	CLK_MSR_ID(42, "mp0_out"),
+	CLK_MSR_ID(43, "fclk_div5"),
+	CLK_MSR_ID(44, "pwm_b"),
+	CLK_MSR_ID(45, "pwm_a"),
+	CLK_MSR_ID(46, "vpu"),
+	CLK_MSR_ID(47, "ddr_dpll_pt"),
+	CLK_MSR_ID(48, "mp1_out"),
+	CLK_MSR_ID(49, "mp2_out"),
+	CLK_MSR_ID(50, "mp3_out"),
+	CLK_MSR_ID(51, "sd_emmc_c"),
+	CLK_MSR_ID(52, "sd_emmc_b"),
+	CLK_MSR_ID(53, "sd_emmc_a"),
+	CLK_MSR_ID(54, "vpu_clkc"),
+	CLK_MSR_ID(55, "vid_pll_div_out"),
+	CLK_MSR_ID(56, "wave420l_a"),
+	CLK_MSR_ID(57, "wave420l_c"),
+	CLK_MSR_ID(58, "wave420l_b"),
+	CLK_MSR_ID(59, "hcodec"),
+	CLK_MSR_ID(60, "arm_ring_osc_out_5"),
+	CLK_MSR_ID(61, "gpio_msr"),
+	CLK_MSR_ID(62, "hevcb"),
+	CLK_MSR_ID(63, "dsi_meas"),
+	CLK_MSR_ID(64, "spicc_1"),
+	CLK_MSR_ID(65, "spicc_0"),
+	CLK_MSR_ID(66, "vid_lock"),
+	CLK_MSR_ID(67, "dsi_phy"),
+	CLK_MSR_ID(68, "hdcp22_esm"),
+	CLK_MSR_ID(69, "hdcp22_skp"),
+	CLK_MSR_ID(70, "pwm_f"),
+	CLK_MSR_ID(71, "pwm_e"),
+	CLK_MSR_ID(72, "pwm_d"),
+	CLK_MSR_ID(73, "pwm_c"),
+	CLK_MSR_ID(74, "arm_ring_osc_out_6"),
+	CLK_MSR_ID(75, "hevcf"),
+	CLK_MSR_ID(76, "arm_ring_osc_out_7"),
+	CLK_MSR_ID(77, "rng_ring_osc_0"),
+	CLK_MSR_ID(78, "rng_ring_osc_1"),
+	CLK_MSR_ID(79, "rng_ring_osc_2"),
+	CLK_MSR_ID(80, "rng_ring_osc_3"),
+	CLK_MSR_ID(81, "vapb"),
+	CLK_MSR_ID(82, "ge2d"),
+	CLK_MSR_ID(83, "co_rx"),
+	CLK_MSR_ID(84, "co_tx"),
+	CLK_MSR_ID(85, "arm_ring_osc_out_8"),
+	CLK_MSR_ID(86, "arm_ring_osc_out_9"),
+	CLK_MSR_ID(87, "mipi_dsi_phy"),
+	CLK_MSR_ID(88, "cis2_adapt"),
+	CLK_MSR_ID(89, "hdmi_todig"),
+	CLK_MSR_ID(90, "hdmitx_sys"),
+	CLK_MSR_ID(91, "nna_core"),
+	CLK_MSR_ID(92, "nna_axi"),
+	CLK_MSR_ID(93, "vad"),
+	CLK_MSR_ID(94, "eth_phy_rx"),
+	CLK_MSR_ID(95, "eth_phy_pll"),
+	CLK_MSR_ID(96, "vpu_b"),
+	CLK_MSR_ID(97, "cpu_b_tmp"),
+	CLK_MSR_ID(98, "ts"),
+	CLK_MSR_ID(99, "arm_ring_osc_out_10"),
+	CLK_MSR_ID(100, "arm_ring_osc_out_11"),
+	CLK_MSR_ID(101, "arm_ring_osc_out_12"),
+	CLK_MSR_ID(102, "arm_ring_osc_out_13"),
+	CLK_MSR_ID(103, "arm_ring_osc_out_14"),
+	CLK_MSR_ID(104, "arm_ring_osc_out_15"),
+	CLK_MSR_ID(105, "arm_ring_osc_out_16"),
+	CLK_MSR_ID(106, "ephy_test"),
+	CLK_MSR_ID(107, "au_dac_g128x"),
+	CLK_MSR_ID(108, "audio_locker_out"),
+	CLK_MSR_ID(109, "audio_locker_in"),
+	CLK_MSR_ID(110, "audio_tdmout_c_sclk"),
+	CLK_MSR_ID(111, "audio_tdmout_b_sclk"),
+	CLK_MSR_ID(112, "audio_tdmout_a_sclk"),
+	CLK_MSR_ID(113, "audio_tdmin_lb_sclk"),
+	CLK_MSR_ID(114, "audio_tdmin_c_sclk"),
+	CLK_MSR_ID(115, "audio_tdmin_b_sclk"),
+	CLK_MSR_ID(116, "audio_tdmin_a_sclk"),
+	CLK_MSR_ID(117, "audio_resample"),
+	CLK_MSR_ID(118, "audio_pdm_sys"),
+	CLK_MSR_ID(119, "audio_spdifout_b"),
+	CLK_MSR_ID(120, "audio_spdifout"),
+	CLK_MSR_ID(121, "audio_spdifin"),
+	CLK_MSR_ID(122, "audio_pdm_dclk"),
+	CLK_MSR_ID(123, "audio_resampled"),
+	CLK_MSR_ID(124, "earcrx_pll"),
+	CLK_MSR_ID(125, "earcrx_pll_test"),
+	CLK_MSR_ID(126, "csi_phy0"),
+	CLK_MSR_ID(127, "csi2_data"),
+};
+
 static int meson_measure_id(struct meson_msr_id *clk_msr_id,
 			       unsigned int duration)
 {
@@ -360,6 +494,10 @@ static int meson_measure_id(struct meson_msr_id *clk_msr_id,
 	unsigned int val;
 	int ret;
 
+	ret = mutex_lock_interruptible(&measure_lock);
+	if (ret)
+		return ret;
+
 	regmap_write(priv->regmap, MSR_CLK_REG0, 0);
 
 	/* Set measurement duration */
@@ -377,8 +515,10 @@ static int meson_measure_id(struct meson_msr_id *clk_msr_id,
 
 	ret = regmap_read_poll_timeout(priv->regmap, MSR_CLK_REG0,
 				       val, !(val & MSR_BUSY), 10, 10000);
-	if (ret)
+	if (ret) {
+		mutex_unlock(&measure_lock);
 		return ret;
+	}
 
 	/* Disable */
 	regmap_update_bits(priv->regmap, MSR_CLK_REG0, MSR_ENABLE, 0);
@@ -386,6 +526,8 @@ static int meson_measure_id(struct meson_msr_id *clk_msr_id,
 	/* Get the value in multiple of gate time counts */
 	regmap_read(priv->regmap, MSR_CLK_REG2, &val);
 
+	mutex_unlock(&measure_lock);
+
 	if (val >= MSR_VAL_MASK)
 		return -EINVAL;
 
@@ -533,6 +675,10 @@ static const struct of_device_id meson_msr_match_table[] = {
 		.compatible = "amlogic,meson-g12a-clk-measure",
 		.data = (void *)clk_msr_g12a,
 	},
+	{
+		.compatible = "amlogic,meson-sm1-clk-measure",
+		.data = (void *)clk_msr_sm1,
+	},
 	{ /* sentinel */ }
 };
 

drivers/soc/amlogic/meson-ee-pwrc.c

@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/bitfield.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include <linux/reset-controller.h>
+#include <linux/reset.h>
+#include <linux/clk.h>
+#include <dt-bindings/power/meson-g12a-power.h>
+#include <dt-bindings/power/meson-sm1-power.h>
+
+/* AO Offsets */
+
+#define AO_RTI_GEN_PWR_SLEEP0		(0x3a << 2)
+#define AO_RTI_GEN_PWR_ISO0		(0x3b << 2)
+
+/* HHI Offsets */
+
+#define HHI_MEM_PD_REG0			(0x40 << 2)
+#define HHI_VPU_MEM_PD_REG0		(0x41 << 2)
+#define HHI_VPU_MEM_PD_REG1		(0x42 << 2)
+#define HHI_VPU_MEM_PD_REG3		(0x43 << 2)
+#define HHI_VPU_MEM_PD_REG4		(0x44 << 2)
+#define HHI_AUDIO_MEM_PD_REG0		(0x45 << 2)
+#define HHI_NANOQ_MEM_PD_REG0		(0x46 << 2)
+#define HHI_NANOQ_MEM_PD_REG1		(0x47 << 2)
+#define HHI_VPU_MEM_PD_REG2		(0x4d << 2)
+
+struct meson_ee_pwrc;
+struct meson_ee_pwrc_domain;
+
+struct meson_ee_pwrc_mem_domain {
+	unsigned int reg;
+	unsigned int mask;
+};
+
+struct meson_ee_pwrc_top_domain {
+	unsigned int sleep_reg;
+	unsigned int sleep_mask;
+	unsigned int iso_reg;
+	unsigned int iso_mask;
+};
+
+struct meson_ee_pwrc_domain_desc {
+	char *name;
+	unsigned int reset_names_count;
+	unsigned int clk_names_count;
+	struct meson_ee_pwrc_top_domain *top_pd;
+	unsigned int mem_pd_count;
+	struct meson_ee_pwrc_mem_domain *mem_pd;
+	bool (*get_power)(struct meson_ee_pwrc_domain *pwrc_domain);
+};
+
+struct meson_ee_pwrc_domain_data {
+	unsigned int count;
+	struct meson_ee_pwrc_domain_desc *domains;
+};
+
+/* TOP Power Domains */
+
+static struct meson_ee_pwrc_top_domain g12a_pwrc_vpu = {
+	.sleep_reg = AO_RTI_GEN_PWR_SLEEP0,
+	.sleep_mask = BIT(8),
+	.iso_reg = AO_RTI_GEN_PWR_SLEEP0,
+	.iso_mask = BIT(9),
+};
+
+#define SM1_EE_PD(__bit)					\
+	{							\
+		.sleep_reg = AO_RTI_GEN_PWR_SLEEP0, 		\
+		.sleep_mask = BIT(__bit), 			\
+		.iso_reg = AO_RTI_GEN_PWR_ISO0, 		\
+		.iso_mask = BIT(__bit), 			\
+	}
+
+static struct meson_ee_pwrc_top_domain sm1_pwrc_vpu = SM1_EE_PD(8);
+static struct meson_ee_pwrc_top_domain sm1_pwrc_nna = SM1_EE_PD(16);
+static struct meson_ee_pwrc_top_domain sm1_pwrc_usb = SM1_EE_PD(17);
+static struct meson_ee_pwrc_top_domain sm1_pwrc_pci = SM1_EE_PD(18);
+static struct meson_ee_pwrc_top_domain sm1_pwrc_ge2d = SM1_EE_PD(19);
+
+/* Memory PD Domains */
+
+#define VPU_MEMPD(__reg)					\
+	{ __reg, GENMASK(1, 0) },				\
+	{ __reg, GENMASK(3, 2) },				\
+	{ __reg, GENMASK(5, 4) },				\
+	{ __reg, GENMASK(7, 6) },				\
+	{ __reg, GENMASK(9, 8) },				\
+	{ __reg, GENMASK(11, 10) },				\
+	{ __reg, GENMASK(13, 12) },				\
+	{ __reg, GENMASK(15, 14) },				\
+	{ __reg, GENMASK(17, 16) },				\
+	{ __reg, GENMASK(19, 18) },				\
+	{ __reg, GENMASK(21, 20) },				\
+	{ __reg, GENMASK(23, 22) },				\
+	{ __reg, GENMASK(25, 24) },				\
+	{ __reg, GENMASK(27, 26) },				\
+	{ __reg, GENMASK(29, 28) },				\
+	{ __reg, GENMASK(31, 30) }
+
+#define VPU_HHI_MEMPD(__reg)					\
+	{ __reg, BIT(8) },					\
+	{ __reg, BIT(9) },					\
+	{ __reg, BIT(10) },					\
+	{ __reg, BIT(11) },					\
+	{ __reg, BIT(12) },					\
+	{ __reg, BIT(13) },					\
+	{ __reg, BIT(14) },					\
+	{ __reg, BIT(15) }
+
+static struct meson_ee_pwrc_mem_domain g12a_pwrc_mem_vpu[] = {
+	VPU_MEMPD(HHI_VPU_MEM_PD_REG0),
+	VPU_MEMPD(HHI_VPU_MEM_PD_REG1),
+	VPU_MEMPD(HHI_VPU_MEM_PD_REG2),
+	VPU_HHI_MEMPD(HHI_MEM_PD_REG0),
+};
+
+static struct meson_ee_pwrc_mem_domain g12a_pwrc_mem_eth[] = {
+	{ HHI_MEM_PD_REG0, GENMASK(3, 2) },
+};
+
+static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_vpu[] = {
+	VPU_MEMPD(HHI_VPU_MEM_PD_REG0),
+	VPU_MEMPD(HHI_VPU_MEM_PD_REG1),
+	VPU_MEMPD(HHI_VPU_MEM_PD_REG2),
+	VPU_MEMPD(HHI_VPU_MEM_PD_REG3),
+	{ HHI_VPU_MEM_PD_REG4, GENMASK(1, 0) },
+	{ HHI_VPU_MEM_PD_REG4, GENMASK(3, 2) },
+	{ HHI_VPU_MEM_PD_REG4, GENMASK(5, 4) },
+	{ HHI_VPU_MEM_PD_REG4, GENMASK(7, 6) },
+	VPU_HHI_MEMPD(HHI_MEM_PD_REG0),
+};
+
+static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_nna[] = {
+	{ HHI_NANOQ_MEM_PD_REG0, 0xff },
+	{ HHI_NANOQ_MEM_PD_REG1, 0xff },
+};
+
+static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_usb[] = {
+	{ HHI_MEM_PD_REG0, GENMASK(31, 30) },
+};
+
+static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_pcie[] = {
+	{ HHI_MEM_PD_REG0, GENMASK(29, 26) },
+};
+
+static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_ge2d[] = {
+	{ HHI_MEM_PD_REG0, GENMASK(25, 18) },
+};
+
+static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_audio[] = {
+	{ HHI_MEM_PD_REG0, GENMASK(5, 4) },
+	{ HHI_AUDIO_MEM_PD_REG0, GENMASK(1, 0) },
+	{ HHI_AUDIO_MEM_PD_REG0, GENMASK(3, 2) },
+	{ HHI_AUDIO_MEM_PD_REG0, GENMASK(5, 4) },
+	{ HHI_AUDIO_MEM_PD_REG0, GENMASK(7, 6) },
+	{ HHI_AUDIO_MEM_PD_REG0, GENMASK(13, 12) },
+	{ HHI_AUDIO_MEM_PD_REG0, GENMASK(15, 14) },
+	{ HHI_AUDIO_MEM_PD_REG0, GENMASK(17, 16) },
+	{ HHI_AUDIO_MEM_PD_REG0, GENMASK(19, 18) },
+	{ HHI_AUDIO_MEM_PD_REG0, GENMASK(21, 20) },
+	{ HHI_AUDIO_MEM_PD_REG0, GENMASK(23, 22) },
+	{ HHI_AUDIO_MEM_PD_REG0, GENMASK(25, 24) },
+	{ HHI_AUDIO_MEM_PD_REG0, GENMASK(27, 26) },
+};
+
+#define VPU_PD(__name, __top_pd, __mem, __get_power, __resets, __clks)	\
+	{								\
+		.name = __name,						\
+		.reset_names_count = __resets,				\
+		.clk_names_count = __clks,				\
+		.top_pd = __top_pd,					\
+		.mem_pd_count = ARRAY_SIZE(__mem),			\
+		.mem_pd = __mem,					\
+		.get_power = __get_power,				\
+	}
+
+#define TOP_PD(__name, __top_pd, __mem, __get_power)			\
+	{								\
+		.name = __name,						\
+		.top_pd = __top_pd,					\
+		.mem_pd_count = ARRAY_SIZE(__mem),			\
+		.mem_pd = __mem,					\
+		.get_power = __get_power,				\
+	}
+
+#define MEM_PD(__name, __mem)						\
+	TOP_PD(__name, NULL, __mem, NULL)
+
+static bool pwrc_ee_get_power(struct meson_ee_pwrc_domain *pwrc_domain);
+
+static struct meson_ee_pwrc_domain_desc g12a_pwrc_domains[] = {
+	[PWRC_G12A_VPU_ID]  = VPU_PD("VPU", &g12a_pwrc_vpu, g12a_pwrc_mem_vpu,
+				     pwrc_ee_get_power, 11, 2),
+	[PWRC_G12A_ETH_ID] = MEM_PD("ETH", g12a_pwrc_mem_eth),
+};
+
+static struct meson_ee_pwrc_domain_desc sm1_pwrc_domains[] = {
+	[PWRC_SM1_VPU_ID]  = VPU_PD("VPU", &sm1_pwrc_vpu, sm1_pwrc_mem_vpu,
+				    pwrc_ee_get_power, 11, 2),
+	[PWRC_SM1_NNA_ID]  = TOP_PD("NNA", &sm1_pwrc_nna, sm1_pwrc_mem_nna,
+				    pwrc_ee_get_power),
+	[PWRC_SM1_USB_ID]  = TOP_PD("USB", &sm1_pwrc_usb, sm1_pwrc_mem_usb,
+				    pwrc_ee_get_power),
+	[PWRC_SM1_PCIE_ID] = TOP_PD("PCI", &sm1_pwrc_pci, sm1_pwrc_mem_pcie,
+				    pwrc_ee_get_power),
+	[PWRC_SM1_GE2D_ID] = TOP_PD("GE2D", &sm1_pwrc_ge2d, sm1_pwrc_mem_ge2d,
+				    pwrc_ee_get_power),
+	[PWRC_SM1_AUDIO_ID] = MEM_PD("AUDIO", sm1_pwrc_mem_audio),
+	[PWRC_SM1_ETH_ID] = MEM_PD("ETH", g12a_pwrc_mem_eth),
+};
+
+struct meson_ee_pwrc_domain {
+	struct generic_pm_domain base;
+	bool enabled;
+	struct meson_ee_pwrc *pwrc;
+	struct meson_ee_pwrc_domain_desc desc;
+	struct clk_bulk_data *clks;
+	int num_clks;
+	struct reset_control *rstc;
+	int num_rstc;
+};
+
+struct meson_ee_pwrc {
+	struct regmap *regmap_ao;
+	struct regmap *regmap_hhi;
+	struct meson_ee_pwrc_domain *domains;
+	struct genpd_onecell_data xlate;
+};
+
+static bool pwrc_ee_get_power(struct meson_ee_pwrc_domain *pwrc_domain)
+{
+	u32 reg;
+
+	regmap_read(pwrc_domain->pwrc->regmap_ao,
+		    pwrc_domain->desc.top_pd->sleep_reg, &reg);
+
+	return (reg & pwrc_domain->desc.top_pd->sleep_mask);
+}
+
+static int meson_ee_pwrc_off(struct generic_pm_domain *domain)
+{
+	struct meson_ee_pwrc_domain *pwrc_domain =
+		container_of(domain, struct meson_ee_pwrc_domain, base);
+	int i;
+
+	if (pwrc_domain->desc.top_pd)
+		regmap_update_bits(pwrc_domain->pwrc->regmap_ao,
+				   pwrc_domain->desc.top_pd->sleep_reg,
+				   pwrc_domain->desc.top_pd->sleep_mask,
+				   pwrc_domain->desc.top_pd->sleep_mask);
+	udelay(20);
+
+	for (i = 0 ; i < pwrc_domain->desc.mem_pd_count ; ++i)
+		regmap_update_bits(pwrc_domain->pwrc->regmap_hhi,
+				   pwrc_domain->desc.mem_pd[i].reg,
+				   pwrc_domain->desc.mem_pd[i].mask,
+				   pwrc_domain->desc.mem_pd[i].mask);
+
+	udelay(20);
+
+	if (pwrc_domain->desc.top_pd)
+		regmap_update_bits(pwrc_domain->pwrc->regmap_ao,
+				   pwrc_domain->desc.top_pd->iso_reg,
+				   pwrc_domain->desc.top_pd->iso_mask,
+				   pwrc_domain->desc.top_pd->iso_mask);
+
+	if (pwrc_domain->num_clks) {
+		msleep(20);
+		clk_bulk_disable_unprepare(pwrc_domain->num_clks,
+					   pwrc_domain->clks);
+	}
+
+	return 0;
+}
+
+static int meson_ee_pwrc_on(struct generic_pm_domain *domain)
+{
+	struct meson_ee_pwrc_domain *pwrc_domain =
+		container_of(domain, struct meson_ee_pwrc_domain, base);
+	int i, ret;
+
+	if (pwrc_domain->desc.top_pd)
+		regmap_update_bits(pwrc_domain->pwrc->regmap_ao,
+				   pwrc_domain->desc.top_pd->sleep_reg,
+				   pwrc_domain->desc.top_pd->sleep_mask, 0);
+	udelay(20);
+
+	for (i = 0 ; i < pwrc_domain->desc.mem_pd_count ; ++i)
+		regmap_update_bits(pwrc_domain->pwrc->regmap_hhi,
+				   pwrc_domain->desc.mem_pd[i].reg,
+				   pwrc_domain->desc.mem_pd[i].mask, 0);
+
+	udelay(20);
+
+	ret = reset_control_assert(pwrc_domain->rstc);
+	if (ret)
+		return ret;
+
+	if (pwrc_domain->desc.top_pd)
+		regmap_update_bits(pwrc_domain->pwrc->regmap_ao,
+				   pwrc_domain->desc.top_pd->iso_reg,
+				   pwrc_domain->desc.top_pd->iso_mask, 0);
+
+	ret = reset_control_deassert(pwrc_domain->rstc);
+	if (ret)
+		return ret;
+
+	return clk_bulk_prepare_enable(pwrc_domain->num_clks,
+				       pwrc_domain->clks);
+}
+
+static int meson_ee_pwrc_init_domain(struct platform_device *pdev,
+				     struct meson_ee_pwrc *pwrc,
+				     struct meson_ee_pwrc_domain *dom)
+{
+	dom->pwrc = pwrc;
+	dom->num_rstc = dom->desc.reset_names_count;
+	dom->num_clks = dom->desc.clk_names_count;
+
+	if (dom->num_rstc) {
+		int count = reset_control_get_count(&pdev->dev);
+
+		if (count != dom->num_rstc)
+			dev_warn(&pdev->dev, "Invalid resets count %d for domain %s\n",
+				 count, dom->desc.name);
+
+		dom->rstc = devm_reset_control_array_get(&pdev->dev, false,
+							 false);
+		if (IS_ERR(dom->rstc))
+			return PTR_ERR(dom->rstc);
+	}
+
+	if (dom->num_clks) {
+		int ret = devm_clk_bulk_get_all(&pdev->dev, &dom->clks);
+		if (ret < 0)
+			return ret;
+
+		if (dom->num_clks != ret) {
+			dev_warn(&pdev->dev, "Invalid clocks count %d for domain %s\n",
+				 ret, dom->desc.name);
+			dom->num_clks = ret;
+		}
+	}
+
+	dom->base.name = dom->desc.name;
+	dom->base.power_on = meson_ee_pwrc_on;
+	dom->base.power_off = meson_ee_pwrc_off;
+
+	/*
+         * TOFIX: This is a special case for the VPU power domain, which can
+	 * be enabled previously by the bootloader. In this case the VPU
+         * pipeline may be functional but no driver maybe never attach
+         * to this power domain, and if the domain is disabled it could
+         * cause system errors. This is why the pm_domain_always_on_gov
+         * is used here.
+         * For the same reason, the clocks should be enabled in case
+         * we need to power the domain off, otherwise the internal clocks
+         * prepare/enable counters won't be in sync.
+         */
+	if (dom->num_clks && dom->desc.get_power && !dom->desc.get_power(dom)) {
+		int ret = clk_bulk_prepare_enable(dom->num_clks, dom->clks);
+		if (ret)
+			return ret;
+
+		pm_genpd_init(&dom->base, &pm_domain_always_on_gov, false);
+	} else
+		pm_genpd_init(&dom->base, NULL,
+			      (dom->desc.get_power ?
+			       dom->desc.get_power(dom) : true));
+
+	return 0;
+}
+
+static int meson_ee_pwrc_probe(struct platform_device *pdev)
+{
+	const struct meson_ee_pwrc_domain_data *match;
+	struct regmap *regmap_ao, *regmap_hhi;
+	struct meson_ee_pwrc *pwrc;
+	int i, ret;
+
+	match = of_device_get_match_data(&pdev->dev);
+	if (!match) {
+		dev_err(&pdev->dev, "failed to get match data\n");
+		return -ENODEV;
+	}
+
+	pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
+	if (!pwrc)
+		return -ENOMEM;
+
+	pwrc->xlate.domains = devm_kcalloc(&pdev->dev, match->count,
+					   sizeof(*pwrc->xlate.domains),
+					   GFP_KERNEL);
+	if (!pwrc->xlate.domains)
+		return -ENOMEM;
+
+	pwrc->domains = devm_kcalloc(&pdev->dev, match->count,
+				     sizeof(*pwrc->domains), GFP_KERNEL);
+	if (!pwrc->domains)
+		return -ENOMEM;
+
+	pwrc->xlate.num_domains = match->count;
+
+	regmap_hhi = syscon_node_to_regmap(of_get_parent(pdev->dev.of_node));
+	if (IS_ERR(regmap_hhi)) {
+		dev_err(&pdev->dev, "failed to get HHI regmap\n");
+		return PTR_ERR(regmap_hhi);
+	}
+
+	regmap_ao = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+						    "amlogic,ao-sysctrl");
+	if (IS_ERR(regmap_ao)) {
+		dev_err(&pdev->dev, "failed to get AO regmap\n");
+		return PTR_ERR(regmap_ao);
+	}
+
+	pwrc->regmap_ao = regmap_ao;
+	pwrc->regmap_hhi = regmap_hhi;
+
+	platform_set_drvdata(pdev, pwrc);
+
+	for (i = 0 ; i < match->count ; ++i) {
+		struct meson_ee_pwrc_domain *dom = &pwrc->domains[i];
+
+		memcpy(&dom->desc, &match->domains[i], sizeof(dom->desc));
+
+		ret = meson_ee_pwrc_init_domain(pdev, pwrc, dom);
+		if (ret)
+			return ret;
+
+		pwrc->xlate.domains[i] = &dom->base;
+	}
+
+	of_genpd_add_provider_onecell(pdev->dev.of_node, &pwrc->xlate);
+
+	return 0;
+}
+
+static void meson_ee_pwrc_shutdown(struct platform_device *pdev)
+{
+	struct meson_ee_pwrc *pwrc = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0 ; i < pwrc->xlate.num_domains ; ++i) {
+		struct meson_ee_pwrc_domain *dom = &pwrc->domains[i];
+
+		if (dom->desc.get_power && !dom->desc.get_power(dom))
+			meson_ee_pwrc_off(&dom->base);
+	}
+}
+
+static struct meson_ee_pwrc_domain_data meson_ee_g12a_pwrc_data = {
+	.count = ARRAY_SIZE(g12a_pwrc_domains),
+	.domains = g12a_pwrc_domains,
+};
+
+static struct meson_ee_pwrc_domain_data meson_ee_sm1_pwrc_data = {
+	.count = ARRAY_SIZE(sm1_pwrc_domains),
+	.domains = sm1_pwrc_domains,
+};
+
+static const struct of_device_id meson_ee_pwrc_match_table[] = {
+	{
+		.compatible = "amlogic,meson-g12a-pwrc",
+		.data = &meson_ee_g12a_pwrc_data,
+	},
+	{
+		.compatible = "amlogic,meson-sm1-pwrc",
+		.data = &meson_ee_sm1_pwrc_data,
+	},
+	{ /* sentinel */ }
+};
+
+static struct platform_driver meson_ee_pwrc_driver = {
+	.probe = meson_ee_pwrc_probe,
+	.shutdown = meson_ee_pwrc_shutdown,
+	.driver = {
+		.name		= "meson_ee_pwrc",
+		.of_match_table	= meson_ee_pwrc_match_table,
+	},
+};
+builtin_platform_driver(meson_ee_pwrc_driver);

drivers/soc/amlogic/meson-gx-socinfo.c

@@ -39,6 +39,7 @@ static const struct meson_gx_soc_id {
 	{ "TXHD", 0x27 },
 	{ "G12A", 0x28 },
 	{ "G12B", 0x29 },
+	{ "SM1", 0x2b },
 };
 
 static const struct meson_gx_package_id {
@@ -65,6 +66,8 @@ static const struct meson_gx_package_id {
 	{ "S905D2", 0x28, 0x10, 0xf0 },
 	{ "S905X2", 0x28, 0x40, 0xf0 },
 	{ "S922X", 0x29, 0x40, 0xf0 },
+	{ "A311D", 0x29, 0x10, 0xf0 },
+	{ "S905X3", 0x2b, 0x5, 0xf },
 };
 
 static inline unsigned int socinfo_to_major(u32 socinfo)
@@ -138,8 +141,10 @@ static int __init meson_gx_socinfo_init(void)
 	}
 
 	/* check if chip-id is available */
-	if (!of_property_read_bool(np, "amlogic,has-chip-id"))
+	if (!of_property_read_bool(np, "amlogic,has-chip-id")) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	/* node should be a syscon */
 	regmap = syscon_node_to_regmap(np);

include/dt-bindings/clock/g12a-clkc.h

@@ -138,5 +138,10 @@
 #define CLKID_VDEC_HEVCF			210
 #define CLKID_TS				212
 #define CLKID_CPUB_CLK				224
+#define CLKID_GP1_PLL				243
+#define CLKID_DSU_CLK				252
+#define CLKID_CPU1_CLK				253
+#define CLKID_CPU2_CLK				254
+#define CLKID_CPU3_CLK				255
 
 #endif /* __G12A_CLKC_H */

include/dt-bindings/power/meson-g12a-power.h

@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef _DT_BINDINGS_MESON_G12A_POWER_H
+#define _DT_BINDINGS_MESON_G12A_POWER_H
+
+#define PWRC_G12A_VPU_ID		0
+#define PWRC_G12A_ETH_ID		1
+
+#endif

include/dt-bindings/power/meson-sm1-power.h

@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef _DT_BINDINGS_MESON_SM1_POWER_H
+#define _DT_BINDINGS_MESON_SM1_POWER_H
+
+#define PWRC_SM1_VPU_ID		0
+#define PWRC_SM1_NNA_ID		1
+#define PWRC_SM1_USB_ID		2
+#define PWRC_SM1_PCIE_ID	3
+#define PWRC_SM1_GE2D_ID	4
+#define PWRC_SM1_AUDIO_ID	5
+#define PWRC_SM1_ETH_ID		6
+
+#endif

include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h

@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ *
+ */
+
+#ifndef _DT_BINDINGS_AMLOGIC_MESON_G12A_AUDIO_RESET_H
+#define _DT_BINDINGS_AMLOGIC_MESON_G12A_AUDIO_RESET_H
+
+#define AUD_RESET_PDM		0
+#define AUD_RESET_TDMIN_A	1
+#define AUD_RESET_TDMIN_B	2
+#define AUD_RESET_TDMIN_C	3
+#define AUD_RESET_TDMIN_LB	4
+#define AUD_RESET_LOOPBACK	5
+#define AUD_RESET_TODDR_A	6
+#define AUD_RESET_TODDR_B	7
+#define AUD_RESET_TODDR_C	8
+#define AUD_RESET_FRDDR_A	9
+#define AUD_RESET_FRDDR_B	10
+#define AUD_RESET_FRDDR_C	11
+#define AUD_RESET_TDMOUT_A	12
+#define AUD_RESET_TDMOUT_B	13
+#define AUD_RESET_TDMOUT_C	14
+#define AUD_RESET_SPDIFOUT	15
+#define AUD_RESET_SPDIFOUT_B	16
+#define AUD_RESET_SPDIFIN	17
+#define AUD_RESET_EQDRC		18
+#define AUD_RESET_RESAMPLE	19
+#define AUD_RESET_DDRARB	20
+#define AUD_RESET_POWDET	21
+#define AUD_RESET_TORAM		22
+#define AUD_RESET_TOACODEC	23
+#define AUD_RESET_TOHDMITX	24
+#define AUD_RESET_CLKTREE	25
+
+#endif