mirror of https://gitee.com/openkylin/linux.git
arm64: allwinner: h6: Add common orangepi nodes into dtsi
Based on the information from hardware schematics and orangepi vendor orangepi H6 boards, One Plus and Lite2 shares common nodes like axp805, uart, mmc0 etc. The common differences between them is - One Plus, has Ethernet - Lite2, has Wifi, USB3, CSI port. So, add common orangepi nodes into sun50i-h6-orangepi.dtsi so-that it case use on respective orangepi h6 board dts files. Cc: zhaoyifan <zhao_steven@263.net> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This commit is contained in:
Jagan Teki
Maxime Ripard
parent
729e1ffcf4
commit
f0c083b88a
|
|
@ -4,147 +4,9 @@
|
|||
* Author: Jagan Teki <jagan@amarulasolutions.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sun50i-h6.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "sun50i-h6-orangepi.dtsi"
|
||||
|
||||
/ {
|
||||
model = "OrangePi One Plus";
|
||||
compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins>;
|
||||
vmmc-supply = <®_cldo1>;
|
||||
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&r_i2c {
|
||||
status = "okay";
|
||||
|
||||
axp805: pmic@36 {
|
||||
compatible = "x-powers,axp805", "x-powers,axp806";
|
||||
reg = <0x36>;
|
||||
interrupt-parent = <&r_intc>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
x-powers,self-working-mode;
|
||||
|
||||
regulators {
|
||||
reg_aldo1: aldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-pl";
|
||||
};
|
||||
|
||||
reg_aldo2: aldo2 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-ac200";
|
||||
};
|
||||
|
||||
reg_aldo3: aldo3 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc25-dram";
|
||||
};
|
||||
|
||||
reg_bldo1: bldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc-bias-pll";
|
||||
};
|
||||
|
||||
reg_bldo2: bldo2 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc-efuse-pcie-hdmi-io";
|
||||
};
|
||||
|
||||
reg_bldo3: bldo3 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc-dcxoio";
|
||||
};
|
||||
|
||||
bldo4 {
|
||||
/* unused */
|
||||
};
|
||||
|
||||
reg_cldo1: cldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-3v3";
|
||||
};
|
||||
|
||||
reg_cldo2: cldo2 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-wifi-1";
|
||||
};
|
||||
|
||||
reg_cldo3: cldo3 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-wifi-2";
|
||||
};
|
||||
|
||||
reg_dcdca: dcdca {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <810000>;
|
||||
regulator-max-microvolt = <1080000>;
|
||||
regulator-name = "vdd-cpu";
|
||||
};
|
||||
|
||||
reg_dcdcc: dcdcc {
|
||||
regulator-min-microvolt = <810000>;
|
||||
regulator-max-microvolt = <1080000>;
|
||||
regulator-name = "vdd-gpu";
|
||||
};
|
||||
|
||||
reg_dcdcd: dcdcd {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <960000>;
|
||||
regulator-max-microvolt = <960000>;
|
||||
regulator-name = "vdd-sys";
|
||||
};
|
||||
|
||||
reg_dcdce: dcdce {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "vcc-dram";
|
||||
};
|
||||
|
||||
sw {
|
||||
/* unused */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_ph_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,150 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
|
||||
/*
|
||||
* Copyright (C) 2018 Amarula Solutions
|
||||
* Author: Jagan Teki <jagan@amarulasolutions.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sun50i-h6.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "OrangePi One Plus";
|
||||
compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins>;
|
||||
vmmc-supply = <®_cldo1>;
|
||||
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&r_i2c {
|
||||
status = "okay";
|
||||
|
||||
axp805: pmic@36 {
|
||||
compatible = "x-powers,axp805", "x-powers,axp806";
|
||||
reg = <0x36>;
|
||||
interrupt-parent = <&r_intc>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
x-powers,self-working-mode;
|
||||
|
||||
regulators {
|
||||
reg_aldo1: aldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-pl";
|
||||
};
|
||||
|
||||
reg_aldo2: aldo2 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-ac200";
|
||||
};
|
||||
|
||||
reg_aldo3: aldo3 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc25-dram";
|
||||
};
|
||||
|
||||
reg_bldo1: bldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc-bias-pll";
|
||||
};
|
||||
|
||||
reg_bldo2: bldo2 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc-efuse-pcie-hdmi-io";
|
||||
};
|
||||
|
||||
reg_bldo3: bldo3 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc-dcxoio";
|
||||
};
|
||||
|
||||
bldo4 {
|
||||
/* unused */
|
||||
};
|
||||
|
||||
reg_cldo1: cldo1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-3v3";
|
||||
};
|
||||
|
||||
reg_cldo2: cldo2 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-wifi-1";
|
||||
};
|
||||
|
||||
reg_cldo3: cldo3 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-wifi-2";
|
||||
};
|
||||
|
||||
reg_dcdca: dcdca {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <810000>;
|
||||
regulator-max-microvolt = <1080000>;
|
||||
regulator-name = "vdd-cpu";
|
||||
};
|
||||
|
||||
reg_dcdcc: dcdcc {
|
||||
regulator-min-microvolt = <810000>;
|
||||
regulator-max-microvolt = <1080000>;
|
||||
regulator-name = "vdd-gpu";
|
||||
};
|
||||
|
||||
reg_dcdcd: dcdcd {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <960000>;
|
||||
regulator-max-microvolt = <960000>;
|
||||
regulator-name = "vdd-sys";
|
||||
};
|
||||
|
||||
reg_dcdce: dcdce {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "vcc-dram";
|
||||
};
|
||||
|
||||
sw {
|
||||
/* unused */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_ph_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue